WBMAD/ULB/HM/NIT-44e/2025-2026 Sl No-39

Supply of 9Mtr octagonal min-mast (GI tower structure) complete with foundation bolts & round type bracelets suitable for 4/6nos fittings. Dimension - Top dia 70mm, bottom dia -150mm, 3mm thick, base plate - 2402404mm (Make: Subham Pole / BPP / Calcutta Pole / Utkarsh) [KMDA vetted Rate]

Erection of 1 nos 9meter long G.I Octagonal pole after preparation of RCC Foundation of 400mm x 400mm, 1500mm hight (1200mm below the ground level and above 300mm on ground) with required Rod, cement, chips & sand etc at the ratio 1:1.5:3 with ground bolt.

Supply, delivery of LED Floodlight luminaire with secondary optics made in pressure die-cast housing and heat sink in aluminium extrusion with IP 66 & minimum output of 11000 lumen; Max wattage of 110watt. (Make-Philips) (Model-BVP192 LED110 CW HO NB FG GR PSU) [4 Flood Light will be installed on each HighMast]

Supplying and Drawing 1.1 KV single core stranded ‘FR’ PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required (a) 3x22/0.3 (1.5 sqmm) PWD Sch Page-E-9;1a For internal connection

Supply, delivery 1.1KV grade XLPE insulated 2 core 10 sqmm AL armoured cable (KEI, Havells, Polycab)

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre run including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed [PWD SOR 2017 Page No-F-2, Item No-1a]

Supplying & fixing medium gauge GI Pipe (ISI-Medium) Protection with necessary fittings and jointing materials as required 40 mm dia PWD Sch Page-F-6;11©

Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonry trench for single, 2, 3, 3½ & 4 core PWD Sch Page-F-1;3(a)

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure PWD Sch Page-C-3;item-20(a)

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2 core 10 sqmm cable [PWD SOR 2017 Page No-F-5, Item No-8b]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : For 2 core upto 10 sqmm [PWD SOR 2017 Page No-F-4, Item No-7a]

Supply, fixing of outdoor type single door feeder piller box over all diameter approx 900mm x 550mm x 380mm fabricated with 3mm thick CRCA sheet from side hinge door with locking arrangement and having angle iron mounted legs, installed in brick cement foundation 1:6 plastering, 12mm thick neat cementing, painting etc 32A DP MCB Isolator (legrand) 1Nos MNX 50 Contactor (L&T) 1Nos Digital Timer switch (L&T) 1Nos Toggle switch Terminal Block 32A DP MCB (L&T) 1Nos

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA - Medium GI pipe [PWD SOR 2017 Page No-G1, Item No-2a]

ADD GST

Please Enable Macros to View BoQ information