Spl repair to roads of 550 mtr length at 13 FD Regt and road furniture under GE Missamari

Amount

Surface dressing in soft loose soil n exc 15 cm deep and getting out.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400sqm

M&L 7.5cm thick (compacted thickness) in two layers WBM, with coarse aggregates of grading 2 (63 to40mm size) of grading basalt or trap stone spread, Watered , rolled consolidated to gradient and camber required power roller 8 -12 tone complete all as specifed and directed.

M&L 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to40mm size) of grading basalt or trap stone spread, Watered , rolled consolidated to gradient and camber required power roller 8 -12 tone complete all as specifed and directed.

M&L for preparing Unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and Applying evenly a priming/tack coat (Paving bitumen ) with bituminous primer at 10 kg per 10 sq metre

M&L For Premix bituminous, macadam compacted thickness 75 mm or less with 4% binder content by wight of total mix using VG-30 bitumen of any penetration laid /rolled to required gradint and camber using power roller 8-12 tonnes complete all as specifed and directed

M&L for providing Bituminous premix semi dence asphaltic dense concrete 40mm thick compacted with 5.5 % binder content as in semi-dense asphaltic concrete totasl mix rolled with 8 to 12 tonne power roller and complete to required camper and gradient complete all as specifed and directed.

M&L for preparation of bituminous road surface and marking 2.00 mm thick centre lines, stop lines, dashes, arrows etc and the like n exc 10 cm wide on roads pavements with hot applied thermoplastic road marking of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturerss instruction complete all as specified and directed.

S&F in repair solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125 mm x 125 mm x 25 mm (shank 65 mm)of heigh effciency Mono rystafie solar panel 2.4 V/0.3 watt one NI-ed rechargeable battery (1.2V/1600 MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions aii as specified and directed.

S&F in repair cat eye solar reflective type of metal body alloy of size 100mmX100mmX20mm made of with PAMA striplens reflector of model N DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

Manufacturing, supplying and fixing in repairs retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 1800 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.

Manufacturing, supplying and fixing in repairs retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.

Manufacturing, supplying and fixing in repairs Retro?reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge.

M&L for preparation of bituminous road surface and marking 2.0 mm thick centre lines, stop lines, dashes, arrows etc and the like n exc 15 cm wide on roads pavements with hot applied thermoplastic road marking of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturerss instruction complete all as specified and directed.

M& L for 1000 mm dia Convex Mirror incl insallation Kiit , bolts, nuts etc incl necessary excavation , PCC 1:3:6 for foundation and 50 mm bore MS Post for fixing of convex mirror incl painting and taking down old one all as directed by Engr-in - charge..

Ram Parkash Constructions Pvt. Ltd.

M/S K. T. ENGINEERING

KESHAV ENTERPRISES