Provn of 08 x toilets with bathroom for Bldg No. P-15 (OR MD Accn) at MH, PVC Wiremesh fencing on wall and gazebo hut at MES IB , Addn/ Altn of bdy wall of Bldg No P-10 at Mall Road , Spl repair to Chain Link Security fence around Bldg No P-11, Mall

Amount

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in any type of soil complete all as specified and as directed

M&L for plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete, sub base complete all as specified and directed.

Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed

Returning, filling in soil including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre means radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre means radius built in cement mortar 1:4 complete all as specified and as directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan to any radius built in cement mortar 1:4 in half brick thick wall complete all as specified and as directed.

M&L rendering 15m thick on fair faces of brick work in CM 1:6 and finished surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-charge

M&L rendering 15m thick on fair faces of brick work in CM 1:4 and finished surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-charge

M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landing balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

S&F mild steel TMT bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as specified .

All as per item No 11.00 here in above but 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders.

S&F mild steel TMT bar 8mm dia cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed .

M&L for reinforced precast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in landing, cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary form work, set in cement mortar (1:6) complete all as specified and directed. (Reinforcement shall be measured and paid for separately)

M&L for use waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintel/lintel bend etc complete all as specified and directed.

M&L form work for lintel and RCC/PCC bend in wall etc to fair finshed surfaces complete all as specified and directed.

S&F pre laminated Solid PVC Door frame of size 50mm x 47mm made out of 5mm single side prelam single piece extruded pvc profile and edgs will be painted to match with prelam sheet , PVC sheet are to be reinforced with 19x19mm MS square tube EPDM rubber gasket weather seal shall be provided through out the frame. The profile shall be mitre cut at two corners and joint by insrting 2 nos of 150mm long backets of 15mmx15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed and fixing in opening as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) both side prelam consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified.

M&L for 2nd class hard wood (Sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

M&L for 35 mm thick factory made 2nd class hard wood, plain framed, panelled shutters (two panels), with lock rail and panels of 9 mm thick BWP commercial ply or of venered particle board 12 mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS : 1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F alluminium anodized barrel tower bolt extruded section 200mm length of bolt, ISI marked complete all as specified.

S&F mild steel butt hinges medium weight cold rolled, 100mm size ISI marked complete all as specified.

S&F alluminium anodized handle, cast type, ISI marked complete all as specified of size150mm.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.

Supply and fix CP grating 100mm to 125 dia round fix on floor/ nahani trap with hole/without fixed with cement mortar, complete all as specified and directed.

S&F looking mirror 450x600mm mounted on decorative type PVC frame fixed to PVC rawl plug with CP brackets screw fixed, complete all as specified and directed.

S&F in repair vitreous china squtting pan Orrisa pattern of size 580x440mm white with integral foot rest including connecting to trap and flush pipe anti-syphonage pipe, P trap including provision of cement concrete bedding and making good to floor complete all as specified and directed.

S&F 550x400mm wash basin, vitreous China (Flat back) including fixing and pinning in ends of brackets including brass waste coupling and waste pipe, CP bottle trap including fixing of waste coupling fitting etc alongwith padestal. Make : Jaquar Queens/QNS-WHT780/LYRICS-LYS WHT3880 or equivalant as approved by GE.

S&F Pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Jaquar/ Hindware/ Parryware

S&F brass chromium plated over head shower with arm complete all as specified and directed. Make : Jaquar/ Hindware/ Parryware

S&F 15mm dia bore chromium plated concealed stop cock complete all as specified and directed. Make : Jaquar/ Hindware/ Parryware.

S&F Angle cock cast copper alloy, brass chromium plated, fancy type, with wall cap with round headed knob with wall cap suitable for 15mm bore iron pipe complete all as specified. Make : Jaquar/ Hindware/ Parryware

S&F Bib tap, fancy type, long body, brass chromium plated, with wall cap, round headed knob, screwed for 15mm bore iron pipe complete all as specified. Make : Jaquar/ Hindware/ Parryware

S & F soap dish, brass, 100x100x60mm chromium plated,fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. Make : Jaquar/ Hindware/ Parryware

S&F of vitreous china wash down water closet pan (pedestal pattern) (cascade), white including flushing cistern , plastic water closet seat, white closed pattern with flat bottom and cover etc complete all as specified and directede by Engr-in-Charge Make:- Jaquar queens/ Lyric bearing Cat Part No FYS-WHT-38755152504 FSM or equivalent in Kohler.

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth in Brick/ RCC complete all as specified and directed.

S&F 15mm dia stop valve cast copper alloy , screwed down high pressure with cluch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F PVC connection , 15mm size with two CP brass nuts, length of connection 450mm long complete all as specified and directed.

S&F 20 mm dia brass chromium plated tubular towel rail, D type, 60 cm long between flanges fixed with rawl plug complete all as specified and directed. Make : Jaquar/ Hindware/ Parryware

S&F rotational moulded polyethylene 500 Ltrs Capacity water storage tanks three layered, (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valve PTMT, with polythelene float and fly nut including 20mm dia GI medium grade over flow pipe , approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end complete all as specified and directed.

S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks three layered, (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valve PTMT, with polythelene float and fly nut including 20mm dia GI medium grade over flow pipe , approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end complete all as specified and directed.

S&F 20mm bore stop valve, cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) pipes single socketed, in any length with solvent cement joints laid in trenches in floors complete all as specified and directed.

All as per item No 44.00 here in above but fixed to walls

S & F of 75 mm bore PVC (SWR) pipes single socketed, in any length with solvent cement joints laid in trenches in floors complete all as specified and directed.

All as per item No 46.00 here in above but fixed to wall

S&F PVC (SWR) bend, 75mm bore complete all as specified and directed. Make: Supreme/ Finolex

S&F PVC (SWR) junction single, (Single T) equal or unequland, 110mm bore with access door complete all as specified and directed. Make: Supreme/ Finolex

S&F 75mm PVC (SWR) branch piece single or equal or unequal complete all as specified and directed

S&F 75mm bore UPVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 100mm dia cast iron (spun) soil and waste pipe in any length with or with ears , with cement joints laid in trenches or in floors complete all as specified and directed.

All as per item No 52.00 here in above but fixed to walls.

S&F 75mm dia cast iron (spun) soil and waste pipe in any length with or with ears , with cement joints laid in trenches or in floors complete all as specified and directed.

All as per item No 54.00 here in above but fixed to walls.

S&F cast iron bends any radius for 100 mm dia pipe dia with duck 's foot or heel rest .

S&F cast iron bends any radius for 75 mm dia pipe with duck 's foot or heel rest .

S&F 75mm cast iron branch piece single equal spigot or socket type fitted with oval access doors.

S&F cast iron bend (any radius) of 75mm bore with oval access door.

S&F 75mm dia cast iron cowls.

S&F cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door of 100 mm bore

S&F 75mm dia Cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B 1(1:2:4) complete all as specified.

S&F 100mm dia CI branch piece, (single equal or unequal) (spigot & socket type) complete all as specified and directed ordinary or inverted or with parallel branches.

Taking up or down steel tubing and connections from site with all fittings for 15 mm bore GI tubing complete all as specified and directed.

Taking up or down steel tubing and connections with all fittings for 20 mm bore GI tubing complete all as specified and directed.

Refixing of old steel tubing and connections in new or old position with all new fittings to floor, wall or ceiling as directed, for 15 mm bore GI tubing.(old steel tubing obtained from taking down shall be re-used)

Refixing of old steel tubing and connections in new or old position with all new fittings to floor, wall or ceiling as directed, for 20 mm bore GI tubing.(old steel tubing obtained from taking down shall be re-used)

S&F galvanised steel water tubing medium grade with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing.

S&F galvanised steel water tubing medium grade with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15mm thick in CM 1:6 complete all as specified and directed .

M&L for glazed ceramic coloured tiles of size 375mm x250mm x6-7 mm thick or 450mmx350mmx7mm on vertical surface such as skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including 10 mm thick bedding layer in cement mortar (1:4) finished rough to fix the tiles complete all as specified and directed.

M&L non skid ceramic tiles coloured (300x300)x7-8mm thick in floor etc set and jointed in neat cement slurry and pointed in colour cement to match over and including 15mm thick screed in cement mortar 1:6 complete all as specified and directed.

M&L for vitrified ceramic tiles (dark shade) double charged, of 10 mm thick (square or rectangular) polished area of each tiles exceeding 0.36 Sqm but n.exc 0.38 Sqm in floor set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the shade of tiles with & including screed bed or bedding layer of 15 mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of floor for laying floor finish complete all as specified and directed.

M & L for 75mm thk PCC 1:3:6 type C-2 as in plinth protection, finished even and fair without using extra cement. The plinth protection shall be laid in alternate bays nexe 2 sqm with 10mm wide joints filled with bitumen mastic comprising of 1 part of hot bitumen 85/25 grade and 3 parts sand all by weight complete all as specified.

M&L for hardcore of broken stone or boulder of gauge n. exc 63 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces,complete all as specified and as directed.

Supply only water proofing compound complete all as specified and directed.

M&L for preparing new plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&L for preparing old plastered or previously treated walls surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L for applying three coats of white wash on ceiling including preparation of plastered surface complete all as specified and directed.

M&L for applying three coats of white wash on wall including preparation of plastered surface complete all as specified and directed.

M&L for concrete in PCC (1:3:6) type C-2 ( using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed .

M&L for concrete in PCC (1:3:6) type C-2 ( using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 100 mm bore pipe complete all as specified and directed .

Cleaning of manholes not exceeding 1.5m depth and removing the sludge and burying the waste material in borrow pits. Note:- (Cost of the borrowpit shall be deemed to be included in the quoted rates of this item)

Supply & fixing on site LLDPE septic tank 05 users, designed to carry sewage and sludge, including excavation in any type of soil, PCC (1:4:8) in foundation, vent shaft, connections etc complete all as specified and directed. Make : Sintex/ Supreme

Provn of 200 users septic tanks including excavation and earthwork in any type of soil , PCC foundation, brick work, RCC cover slab, precast RCC man hole cover with angle iron frame vent shaft and sludge chambers complete all as shown on TD drawing, specified and directed.

M&L for construction of soakage well, internal dia 2.4M dia & depth 3.0M including excavation and earthwork in any type of soil ,brick work etc,complete all as shown on TD drawing, specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L providing cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in bed of drain including finishing fair and even complete all as specified and directed by Engr-in-Charge.

Supplying, laying, jointing and testing SGSW drain pipe Grade 'A' 150mm bore (internal dia) laind in trenches andjointed in cement mortar (1:1) complete all as specified and directed.

Supplying, laying, jointing and testing SGSW drain pipe Grade 'A' 100mm bore (internal dia) laind in trenches andjointed in cement mortar (1:1) complete all as specified and directed.

Cutting into existing manholes for connecting new drain 150mm dia making good to pipe and rendering , cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished and reforming benching as required complete all as specified and directed.

M&L PCC (1:2:4) type B-1 (using 20mm graded aggregates) as in benching, coping including necessary weathering, slightly rounded or chamfered angles and throating and necessary form work complete all as specified and directed.

S&F 1.25mm thick mild steel plain black sheet in man holes cover, urinal troughs and funnels and the like complete all as specified and directed by Engr-in-Charge.

Taking down CI/AC/Salt glazed ware pipes and fitting upto 110mm complete all as specified and directed.

M & L for pre-polished pavement coloured tiles glossy finish of size not less than 300 x 300 x 20-22mm thick with anti skid properties laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling posts & struts; (wood, steel or R.C.C) any section, embeded in concrete, brick work masonary etc including taking out embedded portion & making good distributed ground complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for.

Excavating in post holes (or similar holes) each n.exc 0.5 cum in soft/loose soil, getting out, and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

S&F mild steel work as in post and strut in fencing including cutting tops to shape as directed drilling holes, notching for wire etc. and flat iron fillets, 10 mm dia round bar, nut & bolts for securing wire mesh including all necessary drilling and bolting including embeding in concrete and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only MS chain link fencing 4mm dia, GI plain wire, 100x100mm mesh as approved by Engr-in-Charge.

Fixing only chain link fencing, including line wire any mesh, size & type to any type of standard rail, straining bolt etc, including provision of binding wire.

M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in foundation, filling & mass concrete, sub base complete all as specified and directed.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Dismantaling of barbed wire fencing any type and size, complete all as specified and directed. (Each wire shall be measured separately).

Demolition of cement concrete(Unreinforced) of any discription and in any position not other wise specifically provided for complete as specified and directed.

M&L for RCC (1:2:4) type B-1 (20mm graded crushed stone aggregate) as in precast fencing post, straining or terminal posts, struts etc, average sectional area .exc 100 and nexc 250 sqcm with or without chamfered angles and flat, splayed, rounded or mitred tops including forms, moulds, forming holes, including transporting and distribution the posts etc at required intervals, placing of post in true position and holding and staying same while ramming around or concreting (Digging of post hole and concreting of post holes if any shall be measured and paid separately) complete all as specified and directed.

M&L for use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions shape rectangular or polygonal for fair finished surfaces of concrete Square, complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (20mm thick graded stone aggregate) as in bed block, hold fast block etc in including necessary form work complete.

S&F fiber glass reinforced translucent corrugated sheeting 2 mm thick with two corrugation side lap fixed with L-type or J-type or cranked hook bolts and washer complete all as specified and directed.

M&L Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strangth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick for ridge cover of any colour having tensile strangth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Spreading and levelling excavated earth in layers n exe. 25 cm thick and well rammin including watering as required complete all as specified and directed by Engr -in-Charge

M&L for hardcore of broken bricks gauge n.exc. 63 mm deposited, spread & levelled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.

S&F Joist channel, angle or tee sections fixed independently without connecting plate etc. (cut to ordinory length i.e. within 20 mm of the length indicated) conforming to Fe-410-W (Gde- E- 250) quality A complete all as specified and directed.

Providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, all complete at all heights as per direction of Engineer-in-Charge.

M & L sheet glass ordinary quality 5mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane complete all as specified and directed.

M&L for providing damp proof course 40 mm thick in cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) to horizontal or vertical surfaces mixed with integral water proofing compound as per manufacturere instructions including necessary formwork complete all as specified and directed. NOTE:- Water proofing compound shall be measured and paid seperately.

S & F aluminium anodised partition (Single for glass) and frame with aluminium section with and including glass (as specified below), Aluminium sections shall be of size as given below:- Frame : 50 x 50 mm x 1.08 mm thick, Top/ bottom and side style/ rails of partition Glass : 4.8 mm thick rectro reflected glass fixed with rubber gasket with aluminium beadig and making good of wall surface with matching to existing surface complete all as specified and directed.

M&L for applying two coats of exterior weather proof paints on old surfaces including preparation of surfaces complete all as specified and directed by Engr -in-Charge

M&L for Point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete all as specified and directed by Engr.-in-charge of following. Note:- Wire/cable colour coding shall be maintained properly as per IE rule. The make of conduit & its accessories should be Precision/Polycab/AKG.

(a) One light/bell point controlled by one-one way switch.

(b) One three pin 5 Amp socket on same board with other switches.

All as per item No. 121.00 here in above but with 2.5 Sqmm. (nominal area) wire/cable for phase and neutral for one 3 Pin 15 amp socket on independent board including one 2.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable, FRLS 1100 volts grade as earth continuity conductor upto common earth & connected to earth dolly complete all as specified and directed by Eng.-in-charge.

S & F Switch piano flush type single pole one way 230 Volts 6 Amp complete all as directed.

S & F Switch piano flush type single pole two way 230 Volts 6 Amp complete all as directed.

S & F Socket outlet 3 pin , 230 Volts 5/6 Amps flush type multipurpose 5 pin complete.

S & F bell push flush type 5 Amps 230 Volts single pole complete.

Supply and fixing Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified.

Supply and fixing Switch piano; flush type, single pole, one way, 230 Volts 15/16 Amps IS: 3854 marked with valid CML No. complete all as specified.

Supply and fixing Ceiling rose, Three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified.

S & F Lamp holder polycarbonate insulated body, with back plate with and incl LED lamp retrofit 7 watts complete.

S&F mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size . Make Havells Cat No Edgelite or equilent in Philips/Wipro

S&F industrial type LED tube light fitting box type extruded alluminium body with poly carbonate deffuser all in one single phase 20/22 Watts pre-wired all accessories.complete all as directed and specified by Engr in charge Make Crompton/Philips/C&S

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with Two runs of 4 Sqmm as current carrying conductor and one run of 4 Sqmm as earth conductor PVC insulated FRLS cable with multi stranded copper conductor of nominal cross section area as under and drawing into and including concealed PVC non metallic rigid conduit medium grade complete all as specified. Note:- Two runs of wire and one run of earth wire shall be measured as one meter only for payment purpose.

S & F , MCB SP 6 to 32 Amp, 240 Volts, 'B' curve having breaking capacity 10 KA, air flow channels and ON/OFF indication.

Supply & Fixing of water heater storage type electric driven, single phase of capacity 25 litre 5 star rating complete with fixing arrangement including grouting of nut bolt, washers etc 4 Nos hold fasteners with and incl hot/cold water pipe connections all as specified and directed. Make-Racold/Crompton/Jaquar/havells

M.K Engineers

M/s Anil Kumar

M/S C S AITHANI