CA NO GE(N)AMB-06/2021-22 REPAIR/MAINT INCLUDING PAINTING AND POLISHING OF STEEL ALMIRAH, LOCKERS,LADDERS, CHARPOY AND ALL TYPE OF STEEL FURNITURE OF BSO (NORTH) UNDER GE (NORTH) AMBALA CANTT

Amount

Taking out unserviceable long rail from charpoy GI pipe (FD-220) and S&F new long rail 32mm bore medium grade matching with the existing shape & size including threading complete all as specified and as directed by the Engr-in-Charge. Note:Items will be dumped in advance before commencement of work along with purchase voucher.

Taking out unserviceable short rail from Charpoy GI pipe (FD-220) and fixing short rail duly threaded both the end of pipe retireved out of unserviceable long rail from srl item No. 1.00 above matching with the existing shape & size complete all as specified and as directed by the Engr-in-Charge.

Taking out unserviceable leg from charpoy GI pipe (FD-220) and fixing leg duly threaded one end of pipe retrieved out of unserviceable short rail from srl item No 2.00 above. MS plate 3 mm thick in round shape should be welded at the bottom of the legs matching with the existing shape & size complete all as specified and as directed by the Engr-in-Charge.

Taking out unserviceable GI 3 way elbow from charpoy GI pipe (FD-220) and S&F new elbow 32mm bore ISI marked matching with the existing shape & size. Weight of elbow shall not be less than 400 gms as approved complete all as specified and as directed by the Engr-in-Charge

Taking out unserviceable GI check nut 10mm thick, 32mm bore from Charpoy GI pipe (FD-220) and S&F new check nut ISI Marked. matching with the existing shape & size complete all as specified and as directed by the Engr-in-Charge.

Taking out unserviceable newar from Charpoy GI pipe (FD-220) , S&F new plywood 12mm thick of size 1990x910mm exterior grade BWR ISI Marked , IS code 303. Before fixing of plywood, all steel surfaces should be cleaned, loose part of charpoy to be framed and frame to be tightened including MS plate 3 mm thick in round shape shall be welded at the bottom of all legs. Making 03 Nos hole of equal size on both long rail and 02 Nos holes of equal size on both short rail by drill machine, S&F of 03 (Three) Nos MS flat stiffners of size 40 x 5 mm thick and 900 mm long duly hole both the end of stiffner by drill machine, hole should be matched with hole of long rail at equal distance on both the long rails and painting of all MS stiffner with two coat of synthetic enamelled black paint over a coat of red oxide. After that plywood in all four corners of the ply duly rounded in shape and smoothened by using sand paper etc. Plywood should be fixed with cap type nut & bolts as per sample held with BSO (North) Furniture Yard complete all as specified and directed by the Engr-in-Charge. Note:plywood will be dumped in advance before commencement of work along with purchase voucher. Note : Payment will be processed after fulfilling following condition:- (i) Verification of purchase voucher of plywood. (ii) Certification of plywood supplied on ground that plywood supplied is complying CA all as per specifications by manufacturers. (iii) Submission of test certificate of plywood from manufacturers. (iv) Make of ply shall be Dura Ply, Archid Ply, Bhutan Board, Archid Board, Century, Durian, Mysore Chip Board Ltd.

Taking out unserviceable plastic newar from charpoy GI pipe (FD-220), cleaning of all steel surfaces, all loose part of charpoy shall be framed and tightening where ever required and supply & re-weaving with new plastic newar 50 to 55mm wide of best quality as approved . Re-weaving shall be done closely as directed by Engineer-in-Charge, MS plate 5 mm thick in round shape shall be welded at the bottom of all legs as shown in drg. complete all as specified and directed by the Engr-in-Charge.

Teapoy verandah (FD-383,255) Taking out unserviceable table top from teapoy verandah and S&F new table top made of pre-laminated particle board 18 mm thick exterior grade one side teak face & other side balancing white lamination, ISI marked as per IS Code No-12823 duly covered with 4mm thick teak wood beading all around the top,matching with the existing shape and size, all as shown in drg complete all as specified and as directed by the Engr-in-Charge.

Table office clerk steel (FD-84, 307, 1004) Taking out unserviceable table top from table office clerk steel and S&F new table top made of pre-laminated particle board 18 mm thick exterior grade one side teak face & other side balancing white lamination, ISI marked as per IS Code No-12823 duly covered with 4mm thick teak wood beading all around the top,matching with the existing shape and size, all as shown in drg complete all as specified and as directed by the Engr-in-Charge.

Table office officer steel (FD-84, 1003) Taking out unserviceable table top from table office officer steel and S&F new table top made of pre-laminated particle board 18 mm thick exterior grade one side teak face & other side balancing white lamination, ISI marked as per IS Code No-12823 duly covered with 4mm thick teak wood beading all around the top,matching with the existing shape and size, all as shown in drg complete all as specified and as directed by the Engr-in-Charge.

Table Dinning OR (FD-165) Taking out unserviceable table top from table dinning and S&F new table top made of pre-laminated particle board 18 mm thick exterior grade one side teak face & other side balancing white lamination, ISI marked as per IS Code No-12823 duly covered with 4mm thick teak wood beading all around the top,matching with the existing shape and size, all as shown in drg complete all as specified and as directed by the Engr-in-Charge.

Table 3'x2' with or with out drawer steel (FD-223,310,283,1007, 1008) Taking out unserviceable table top from table 3'x2' and S&F new table top made of pre-laminated particle board 18 mm thick exterior grade one side teak face & other side balancing white lamination, ISI marked as per IS Code No-12823 duly covered with 4mm thick teak wood beading all around the top,matching with the existing shape and size, all as shown in drg complete all as specified and as directed by the Engr-in-Charge.

Table 3'x3' steel (FD-1009) Taking out unserviceable table top from table 3'x3' and S&F new table top made of pre-laminated particle board 18 mm thick exterior grade one side teak face & other side balancing white lamination, ISI marked as per IS Code No-12823 duly covered with 4mm thick teak wood beading all around the top,matching with the existing shape and size, all as shown in drg complete all as specified and as directed by the Engr-in-Charge.

Almirah large steel with shelves (FD-67M, 1031) Taking out unserviceable lock from Almirah large steel and S&F new lock with duplicate key of approved quality, matching with the existing shape & size as shown in drg complete all as specified and as directed by Engr-in-Charge.

Taking out unserviceable handle from Almirah large steel with shelves (FD-67M, 1031) and S&F new handle 100mm long chromium plated of approved quality, matching with existing shape and size as shown in drg and as directed by Engr-in-Charge.

Taking out old unserviceable shelves from Almirah large steel with shelves (FD-67M, 1031) and S&F new shelves made out of 1.00mm thick MS plain black sheet, matching with the exisiting shape and size as shown in drg including one coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.

Taking out old unserviceable legs from Almirah large steel with shelves (FD-67M, 1031) and S&F new legs made out of 1.00mm thick MS plain black sheet, matching with the exisiting shape and size as shown in drg including one coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.

Almirah medium steel with shelves (FD-67,1032) Taking out unserviceable lock from Almirah medium steel with shelves and S&F new lock with duplicate key of approved quality, matching with the existing shape & size as shown in drg complete all as specified and as directed by Engr-in-Charge.

Taking out unserviceable handle from Almirah medium steel with shelves (FD-67, 1032) and S&F new handle 100mm long chromium plated of approved quality, matching with existing shape and size as shown in drg and as directed by Engr-in-Charge.

Taking out old unserviceable shelves from Almirah medium steel with shelves (FD-67, 1032) and S&F new shelves made out of 1.00mm thick MS plain black sheet, matching with the exisiting shape and size as shown in drg including one coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.

Taking out old unserviceable legs from Almirah medium steel with shelves (FD-67, 1032) and S&F new legs made out of 1.00mm thick MS plain black sheet, matching with the exisiting shape and size as shown in drg including one coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.

Chair writing cushioned seat & back FD/E6/MAP/12 Taking out unserviceable tapestry cloth from chair writing cushion seat/back and S &F new tapestry cloth of colour, quality and shade as approved by GE/Engr-in-Charge on good quality cushion (rate not less than Rs. 300/- per mtr) matching with existing shape and size all as shown in drg, stiching complete all as specified and as directed by the Engr-in-Charge.

Taking out unserviceable hand rest from chair writing cushione (FD/E6/MAP/12) and S&F new hand rest made of integral skin polyurethane with 75-85 shore 'A' hardness and reinforced with MS insert, matching with the existing shape and size, as shown in drg complete all as specified and as directed by Engr-in-Charge

Locker bed side steel (FD-257 & 1029) Taking out unserviceable hasp and staple from locker bed side steel and S&F new hasp and staple chromium plated of approved quality, matching with existing shape and size as shown in drg and as directed by Engr-in-Charge.

Taking out unserviceable handle from Locker bed side steel (FD-257 & 1029) and S&F new handle 100mm long chromium plated of approved quality, matching with existing shape and size as shown in drg and as directed by Engr-in-Charge.

Taking out unserviceable hanging rod from locker bed side steel (FD-257 & 1029) and S&F new chromium plated steel hanging rod 19 mm dia of approved quality as shown in drg complete all as specified and as directed by Engr-in-charge

Taking out old unserviceable legs from locker bed side steel (FD-257 & 1029) and S&F new legs made out of 1.00mm thick MS plain black sheet, matching with the exisiting shape and size as shown in drg including one coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.

Running welding to any steel furniture items with Gas/Electric as required (running welding upto 12mm shall be considered one point) complete all as specified and as directed by Engr-in-charge.

Preparation of old painting surface of table office clear steel (FD-84,307, 1004) by scratching old paint with sand paper, making smooth surface by filing the craks/cavities, again making the surface smooth with sand paper and applying two coats of silver hammer tone synthetic enamel paint with spary painting on all external and internal surfaces to table office clerk steel complete all as specified and as directed by the Engr-in-Charge.

Description same all as per item No 29 above but table office offficer steel (FD-84, 1003) including polishing to beading of top complete all as specified and as directed by Engr-in-charge.

Description same all as per item No 29 above but table dinning ORs (FD-165) including polishing to beading of top. complete all as specified and as directed by Engr-in-charge.

Description same all as per item No 29 above but table 3'x3' steel (FD-1009) including polishing to beading of top complete all as specified and as directed by Engr-in-charge.

Description same all as per item No 29 above but table 3'x2' with or without drawers (FD-223, 310, 283, 1007 & 1008) including polishing to beading of top complete all as specified and as directed by Engr-in-charge.

Description same all as per item No 29 above but teapoy verandah (FD-383, 255) with white paint synthetic enamel including polishing to beading of top complete all as specified and as directed by Engr-in-charge.

Description same all as per item No 29 above but Almirah large steel with shelves (FD-67M, 1031) complete all as specified and as directed by Engr-in-charge.

Description same all as per item No 29 above but Almirah medium steel with shelves (FD-67, 1032) complete all as specified and as directed by Engr-in-charge.

Description same all as per item No 29 above but chair verandah with white paint synthetic enamel complete all as specified and as directed by Engr-in-charge.

Description same all as per item No 29 above but locker bed side steel (FD-257 & 1029) complete all as specified and as directed by Engr-in-charge.

M/s Rajesh Kumar Jain

V K Constructive Builders

RK STEEL FABRICATORs