Electrification of Kuriachira and Sakthan OWC Plants , East Zone, Thrissur corporation

Amount

Supply, fabricating and erecting GI supporting post for connecting sevice wire 6 meters length 80 mm dia GI pipe (medium class) and fixing a bend on the top of the post including cutting, drilling hole, welding, and fixing in cement concrete of size 450x450x 1250 mm including soil excavation cost, all materials and labour charge etc. complete.

Supplying and Fixing of water proof , inspection type front door, size 570x280x220 mm,model Sintex GSMB 5728 or equivalent, provison for fixing fuse unit, DP Isolator, RCCB, 6A socket with switch and single phase energy meter. Directly fix on fabricated structure of 2Nos GI angle iron supporting post of hight 2000mm, size 50x50x5 mm and inter mediate cross support of 2 Nos size 50x6 mm GI flat, using proper bolts ,nuts etc.and supporting post fixed in cement concrete of size 500x300x 750 mm etc. complete, including cost of all materials and labour charge.

Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry 'enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Providing independent ordinary pipe earthing using 1.50 mtrs of 40 mm dia GI pipe ,earth wire copper and other specials such as common salt ,charcoal bolts and nuts etc. complete required at site.

Supply and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case reccessed counduit as required.20mm PVC conduit

25mm PVC conduit

Supply and drawing for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed steel or PVC conduit as required .3 X 1.5 sq. mm wire

5 X 1.5 sq. mm wire

6 X 1.5 sq. mm wire

12 X 1.5 sq. mm wire

1 X 16 sq. mm wire

3 X 2.5 sq. mm wire

4 X 4 sq. mm wire +1 X 2.5 sq. mm wire

Fabricating and installing supporting structure for fixing SFU with Enclosure. The structure fabricated by of 2Nos GI squre pipe of size 30x30 mm supporting post of hight 1700mm with bottom fix in concrte etc.and 2 Nos horizontal cross bar 500mm length of same size squre pipe, 1 No. vertical cross bar 450 mm length of size 30x20 squre pipe and hinged the 8 mm thick multiwood sheet of of size 500x500 mm. etc. complete. Including cost of all materials and labour charge.

Fabricating and installing supporting structure for fixing SFU and VDB. The structure fabricated by of 2Nos GI squre pipe of size 30x30 mm supporting post of hight 1700mm with bottom fix in concrte etc.and 2 Nos horizontal cross bar 1400mm length of same size squre pipe, 1 No. vertical cross bar 700 mm length of size 30x20 squre pipe and hinged the 8 mm thick multiwood sheet of of size 1400x750 mm. etc. complete. Including cost of all materials and labour charge.

Supply, fabricating and fixing 32 mm dia GI pipe (medium class) for sevice wire laying through the pipe and including cutting, bending and fixing and also including all materials and labour charge etc. complete.

Supply and fitting MS rod type fan hook welded on roof stracture and neatly painted with two coats of enamel paint

Supplying and fixing extra conduit down rod for ceiling fan of 120 cm length G.l. pipe 20 mm dia,heavy gauge including painting etc. as required.

Supplying and laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 4 core 35 Sq.mm

4 core 25 Sq.mm

4 core 10 Sq.mm

4 core 6 Sq.mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed I XLPE aluminium conductor cable of 1.1 kV grade as required. 4 x 35 Sq.mm

4x 25 Sq.mm

4 x 10 Sq.mm

4 x 6 Sq.mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on roof steel perlin using factory made clamps noted along with the cables, spacing of clamps not exceeding 60cms. as required. Upto 35 Sq.mm

Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes 50/38 mm or nearest size made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground including excavation of trench

laying of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes in the existing DWC pipe as required. 4x35 sq.mm & 4x25Sq.mm

Supply and drawing copper conductor for bare conductor copper and earthing as required. 2.64 mm dia (12 SWG )

Supplying, installing, testing and commissioning 63 A, 415 V, Triple Pole with Neutral Link, switch disconnector fuse unit in 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with ISI marked HRC fuses, ( Make prefered ABB, L&T, Siemens) interconnections, earthing etc. as required.

Supplying, installing, testing and commissioning 125 A, 415 V, Triple Pole with Neutral Link, switch disconnector fuse unit in 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with ISI marked HRC fuses, ( Make prefered ABB, L&T, Siemens) interconnections, earthing etc. as required.

Supply and installation of three phase double cover dust and vermin proof enclosure of vertical DB including copper/brass bus bar neutral link and DIN bar suitable provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43), including providing blanking plates in the blanking slots, fixed on wall making good the damages,colour washing etc.as required. DB 4 way (4 + 12), Double door for MCCB incomer

Supplying and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing DB and making connections, testing and commissioning, etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A four pole isolator

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A four pole isolator

Supplying and fixing 5 A to 32 A rating, 240 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB completewith connections, testing and commissioning etc. as required. Single Pole

Supplying and fixing 40 A to 63 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 4 Pole MCB

Supplying and fixing 40 A to 63 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Tripple Pole MCB

Supplying and fixing the following size sheet steel enclosure suitable for MCB/ Isolator etc complete. Enclosure suitable for Four pole MCB / Isolator

Supplying and fixing following size/ modules PVC box along with modular base and cover plate on surface or in recess for modular socket outlet and modular switch as required. 16 Module Plastic box ( 250mm X 250mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

5/6 A socket outlet

15/16 A switch

Supply and fixing of Stepped type fan regulator suitable for existing Ceiling fans in the existing switch box and giving connections etc complete.

Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200mm sweep -5star rated ceiling fan ( Model Crompton, Bajaj, Usha, Havells, Orient) complete with 300mm down rod, canopies, shackeles and blades etc complete.

Supplying, installing, testing and commissioning LED Flood light 50W, 240V, 50Hz, ( Model Bajaj, Philips, ) output > 120 lumen/W 5700 K with IP 66 protection, internal surge protection 4 KV, LED Chip make Cree/Lumilled/Nichea with power factor>0.95 at full load, flood light luminaire with high power light source with secondary optics: reflector made up of high purity matt finish anodized aluminium sheet and built-in isolated electronics LED driver ensures zero maintenance as per IS 15885 Part-2/Sec 13. Including provide suitable clamps for fixing the light etc. complete as required.

Supplying, installing, testing and commissioning LED Street light 70/72 W, 240V, 50Hz ( Model Havells, Bajaj, Philips, Crompton ) made up of pressure die cast aluminium housing with toughened glass with individual high power LEDs with secondary optics having TOP OPENING/accessible driver compartment having IP66 protection and impact resistance of IK07.The LED should be fixed on die-cast extruded aluminium heat sink for proper thermal management with Manufacturer name engraved /embossing in housing to allow traceability till life of fixture (stickering and printing is not acceptable). Including cost of suitable GI pipe bracket with clamps for fixing the light and connecting with PVC 3 core round cable etc. complete as required.

Supplying, installing, testing and commissioning LED Street light 40/45 W, 240V, 50Hz ( Model Bajaj, Philips ) made up of pressure die cast aluminium housing with toughened glass with individual high power LEDs with secondary optics having TOP OPENING/accessible driver compartment having IP66 protection and impact resistance of IK07.The LED should be fixed on die-cast extruded aluminium heat sink for proper thermal management with Manufacturer name engraved /embossing in housing to allow traceability till life of fixture (stickering and printing is not acceptable). Including cost of suitable GI pipe bracket with clamps for fixing the light and connecting with PVC 3 core round cable etc. complete as required.

ANAND T THAZHATHA