Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.0 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹8.8 L+₹81,978.10 (10.3%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹12.6 L+₹4.6 L (58.3%)Rejected-Finance 231 JAGGI GARDEN BALDEV NAGAR AMBALA CITY 134003 | AMBALA CITY | AMBALA | HARYANA | 134003 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
17 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF AMBALA
GE AF AMBALA
GE AF/AMB-T-38/2023-24 PROVN OF CERTAIN MINOR WORKS AT VARIOUS LOCATIONS AT (AF) STN AMBALA UNDER GE (AF) AMBALA
2023_MES_609622_1
GE AF/AMB-T-38/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE AF AMBALA
ALL AS PER NIT TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE AF AMBALA
₹20,000
Yes
8 Sept 2023
19 Jul 2023
19 Aug 2023
19 Jul 2023
17 Aug 2023
4 Aug 2023
20 Jul 2023 - 27 Jul 2023
Amount
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed.
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil, complete all as specified and directed.
M&L for cement concrete 1:4:8, type D2, (using 40mm graded aggregates) in foundations, filling and mass concrete complete all as specified and directed.
M&L for RCC M 25 grade design mix (using 20mm graded aggregates) as in footings fdn beams , lintel beams etc, complete all as specified and directed.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (Horizontal or Sloping) complete all as specified and directed.
M&L for reinforced cement concrete M-25 grade design mix (using 20mm graded stone aggregate) in slab supported on walls , beams and columns in roofs complete all as specified and directed.
All as per srl item No. 6.00 (hrere-in-before) but in column's, complete all as specified and directed.
All as per srl item No. 6.00 (here-in-before) but in beams and lintels, complete all as specified and directed.
M&L for form work to sides of footing and plinth beams finished fair and rough, complete all as specified and directed.
All as per srl item No. 9.00 (hrere-in-before) but in column's, complete all as specified and directed.
All as per srl item No. 9.00 (here-in-before) but in beams and lintels, complete all as specified and directed.
M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending pirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
All as per srl item No. 12.00 (here-in-before) but 6mm to 8mm dia, complete all as specified and directed.
Returning filling in including spreading leveling watering and well ramming in layers n.exc 25 cm in thickness, complete all as specified and directed.
Removal of soil to a distance not exceeding 50m and depositing complete all as specified and directed.
M&L for hardcore of broken stone or boulder of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed.
M&L for cement concrete 1:2:4, type B-1, (40mm thick) (using 20mm graded aggregates) as in leveling course, complete all as specified and directed.
M&L for 15mm thick screed bed or bedding layer in CM 1:4 for laying floor finish and. Complete all as specified and directed by Engineer-in-Charge.
M&L Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white of coloured cement to match, complete all as specified and directed.
M&L for cement concrete 1:3:6, type C2, (40mm graded aggregates) 75mm thick as in plinth protection, complete all as specified and directed.
M&L for brick work with fly ash bricks straight or curved on plan exceeding 6m mean radius built in cement mortor 1:4.all as specified and directed by the Engr-in-Charge
M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for render 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as backing coat to receive wall tiles etc, complete all as specified and directed.
M&L coloured glazed ceramic tiles 300 x450x 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed .
M&L for preparation of newly plastered or unplastered surfaces and applying three coats of white wash on wall.
S&F Pillar tap 15mm dia, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts, screwed for iron pipe and fixed, complete all as specified and directed.
Stop valves 15mm dia cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
S&F 32mm bore High density polyethylene pipes (HDPE) of pressure rating 6kgf/sqcm laid in trenches, complete all as specified and directed.
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors, complete all as specified and directed.
M&L for Tubes,15mm dia bore 'medium grade' with all fitting; laid in trenches or wall, complete all as specified and directed.
M&L for cast iron floor trap 75mm dia, with grating including jointing to wate pipe fixed in cement concrete type B1, (1:2:4), complete all as specified and directed..
Supply and fix PVC connection 15 mm dia, 450 mm long including check nut complete, all as specified and directed.
M&L for pre- polished granite slab machine cut of any shade as approved by GE of 15 to 20 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing(Granite finish) with suitable grinding stones complete all as 'specified and as directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platforms, and other similar situations complete all as specified and directed.
S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including sheet cover and complete all as specified and directed.
S&F in rep Vitrous china wash basin, white, flat back, size 630x450mm counter sunk oval type fixed in granite excluding taps, waste,chain and plug and porcelain stopper complete all as specified and directed. Make- cera
S & F waste coupling CP brass (half or full threaded) 32 mm dia, complete all as specified and directed.
Supply only PVC valve less syphonic action type flushing cistern 10ltr capacity low level, white/coloured with inlet ball valve flaot and handle including bracket and fixing of PVC flush pipe 32 mm dia and PVC connection pipes complete all as specified and directed.
Supply only flush pipe of polythene of low or high density 32 mm PVC for low level flushing cistern complete all as specified.
S&F Health faucet make parryware complete all as specified and directed.
S & F as in repair chromium plated square shape towel ring fixed with chromium plated brass screws in approved pattern complete all as specified and directed. Make Prayag
S & F as in repair stainless steel chromium plated toilet paper holder in approved pattern, shape and size all as specified & directed.
S & F as in repair fancy type chromium plated brass soap dish suitable for double soap fixed of approved pattern, shape and size complete all as specified & directed.
S&F factory made solid PVC moulded door shutter (with wood free EPS), 28 to 30 mm thick (Stiles) with 2, 4, 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face & fixing in frame at site as per drawing shown on SSR complete all as specified and directed.
S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specified and as directed.
S&F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast size 25 x 5 mm of flat iron etc complete all as specified and directed.
S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, 75 mm long complete all as specified and directed.
S&F 125 mm Extruded Aluminium handles fabricated type anodised etc complete all as specified and directed.
S & F 150 mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.
S & F 100 mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.
S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.
S&F 3 mm thick sheet glass figured glass n exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed.
Preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F of 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed.
S&F of 20 mm bore ball valves, high pressure, PTMT, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.
M&L concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 for 150mm dia pipe complete all as specified and directed.
M&L for 150mm dia Salt glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed
Removing excavated material not exceeding 50m and depositing wheredirected at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed
M&L for PCC 1:2:4, Type B1, (using 20mm mechanically crushed stone aggregates) as in coping, kerbs ,benching etc complete all as specified and directed.
M&L for PCC 1:3:6, Type C-2, Concrete bed to100mm drain pipes including packing under, and haunching against the sides ofpipes after they are laid and tested in complete all as specified and directed
M&L for 100mm dia RCC pipe class NP-2, laid in trenches and jointes complete all as specified and directed.
Precast RCC Manholes cover 1:2:4, Type B-1, set in cm 1:6 complete all as specified and directed.
S & F grease trap made of 2mm thick stainless steel (304 grade) of size 1500 x 600x 600mm having flow rate 400 lit/ min and volume 450 litres. Inlet and outlet shall be 100mm bore all as per manufracture instruction, complete all as specified and directed
M&L for brick work sub class B bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade drawn through and including non metallic rigid PVC conduit,medium grade minimum 20mm dia ISI marked and conduit accessories fixed concealed in wall/ceiling/roof etc with sunken type pressed steel/welded MS terminal boxes made out of 1.6 mm MS sheet, 3mm thick laminated sheath top cover for mounting of fittings,switches,sockets outlets,regulators etc complete including provisining of 1.5 sqmm FRLS PVC insulated unsheathed cable 1100 volt grade with multi stranded copper conductor to common earth and connected to earth dolly for the following :- Note:- (i) Rate of cutting chasing,Pinning in & making good shall quoted in unit rates.
One light/Exhaust fan controlled by one switch 6 amp one way complete all as specified and directed.
One 3 pin 5 Amps socket point controlled by one switch on same board complete all as specified and directed.
One 3 pin switch socket combination 6 amp on the independent board complete all as specified and directed.
d) All as per item No.01 but point wiring with 2.5 sqmm single core multi stranded copper conductor FRLS PVC insulated & unsheathed cable 1100 volt grade and 2.5 sqmm FRLS PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board, complete all as specified and directed Note:- (i) Rate of cutting chasing,Pinning in & making good shall quoted in unit rates.
S&F switch piano flush type single pole, one way 6 amp complete all as specified and directed
S&F socket outlet 2 in 1 , 3 pin 5 A flush type complete all as specified and directed.
S&F switch piano flush type single pole, one way 15 amp complete all as specified and directed .
S&F socket outlet 2 in 1 , 3 pin 15 A flush type complete all as specified and directed.
S&F ceiling rose 65x50mm three terminals 230 volt complete all as specified and directed.
S&F lamp holder,PVC/Polycarbonate type and back plate suitable for batten fitting complete all as specified and directed.
S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed .
S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed
S&F sheet metal enclosures for MCB distribution board 230 Volts single pole and neutral 4 way double door type flushed inside the wall with 200 Amp rated bus bar including making the surface good complete all as specified and directed
S&F MCBs SPN 40 amp C curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specified and directed.
S&F MCBs SP 5 to 32 amp C curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specified and directed.
S&F LED lamp 7 watt complete all as specified and directed
S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed.
M&L for earthing complete with galvanized steel earth plate 60 cm X 60 cm X 6 mm thick buried vertically in ground to depth not less than 2.25 metres below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to GI earth wire 4.0mm upto 7.5 mtrs long by means of bolts, nuts, check nuts and washers of galvanized iron and connection to earthing test point & earth dolly including watering pipe GI 15 mm bore, light grade including protection pipe GI light grade 20mm bore , wire mesh, funnel,lugs, salt, charcoal dust, excavation & earthwork in soft/losse soil and refilling pit chamber with PCC 1:2:4, type B1, (using 20 mm graded mechnically crushed stone aggregates) , RCC 1:2:4, type B-1, (using 20 mm graded mechnically crushed stone aggregates) pit cover slab 50 mm thick reinforced with 8 mm dia TMT bars @ 15 cm c/c both ways including necessary form work all as shown in electrical plate No 3 of SSR part-I (2009), including testing on completion on site complete all as specified and as directed.
M&L for fine dry river sand cushioning by laying 8cm thick layer below the cable for making soft bed and 15cm above the cable and then punning down to its consolidated thickness of 18cm after the cable is laid all as specified in SSR Part-I complete all as specified and as directed Note: Only punned thickness of sand shall be considered for measurement purposes
Supply and lay burnt brick sub class B of size 230x115x75mm for protection of cable, laying in trenches complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 2 core complete all as specified and directed.
M&L 25mm bore steel water tubes, medium grade, galvanised, with all fitting, laid in trenches complete all as specified and directed.
M&L 20mm bore steel water tubes, medium grade, galvanised, with all fitting, laid in trenches complete all as specified and directed.
S&F Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed complete for 25mm bore of pipe complete all as specified and directed.
S&F Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed complete for 20mm bore of pipe complete all as specified and directed.
Drilling/Tapping the existing DI/CI pipe line for fixing tee / bend etc of pipe 50/80 mm bore complete all as specified and directed.
M/S VINOD RANA CONTRACTOR
Bairagi Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .