Construction of New Sub division Building and Compound wall at Tubewell Store campus Vijapur for Sub division office Vijapur, Ta. Vijapur , Dist.Mehsana

Name of work :- Construction of New Sub division Building and Compound wall at Tubewell Store campus Vijapur for Sub division office Vijapur , Ta.

Vijapur , Dist.Mehsana

Item Qty Perticulars of Item Rates Without G.S.T.

No In In Words Per Amount

PART-A BUILDING WORK

1 2.10 Jungle clearance of specified category and bushes for canal/dam work as directed with disposing materials etc.

comlete. (excluding tree of girth above 0.5 mt) (b) For Medium dence 20708.00 Rupees Twenty thousand Seven hundred Eight only Cmt.

2 146.00 Dismentaling Masonary in Lime or Cement & Stacking of useful and unuseful material from the dismentalled Rupees Four hundred ninety seven and twenty paisa

materials as directed under detailed specification etc.comp (a) Brick 497.20 Cmt.

3 1.00 Dismentaling of RCC work viz. slab,beam,lintel,barrel,staircase etc. including removing the steel from the

Rupees one Thousand five Hundred forteen and ninety

dismentalled portion without damage to reinforecement sorting & Stacking of useful and unuseful material 1514.90 Cmt.

from the dismentalled materials as directed under detailed specifications etc.complete

4 270.00 Excavation for foundation up to 1.5 m depth including sorting out and stacking of useful materials and

disposing off the excavated stuff up to 50 Meter lead.(A) Dense or Hard soil 157.08 Rupees One hundred fifty seven point zero eight Cmt.

5 66.00 Excavation for foundation for depth from 1.50 to 3.00 m. including sorting out and stacking of useful materials

170.40 Rupees One hundred seventy point four zero Cmt.

and disposing off the excavated stuff upto 50 m. lead (B) Dense or Hard soil

6 100.09 Providing and laying foundation concrete of proportion as under by using cement, sand and machine crushed

Rupees Three thousand, four hundred twenty four point

course aggregate laid in situ including necessary temping, smooth finishing, watering and curing as 3424.30 Cmt.

directed with all leads and lifts etc complete.(A) (P.C.C.) 1:3:6

7 Providing and laying controlled cement concrete M-200 and curing complete including the cost of formwork

and excluding the cost of reinforcements

51.00 (A)Footing & Column Rupees Seven thousand, two hundred twenty two point

4.00 (B)Lintel Rupees Seven thousand, five hundred sixty two point

31.00 (C )Beams Rupees Six thousand, one hundred twenty six point zero

46.00 (D)Slabs Rupees Six thousand, eight hundred ninety three point

3.00 (E)Chajja Rupees Seven thousand, one hundred fifty eight point

7.00 (F)Staircase Rupees Seven thousand, one hundred fifty eight point

8 270.00 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering,

269.75 Rupees Two hundred sixty nine point seven five

ramming and consolidating etc. complete.

9 161.00 Applying general insecticide pest control treatment to floors, cupboards etc including labour material etc.

complete. Using Heptachloride 20 EC. As Per 6113_pests Consentration Weight 0.50 percent is recommended

one litre chemical emulsion dillute with 39 liter of water will give. Total dillute concrentration will be 40 litre 80.62 Rupees Eighty point six two

inclusive of one litre chemical emulsion appication 0.5 Litre chemical / Sqm of surface is recommended as per

10 9.14 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and lacing in position

Rupees Seventy three thousand, six hundred fifty six

complete.Floor upto two level 73656.44

point four four

11 208.00 Providing burnt brick masonary 2nd class incement mortar in1:5 proportion for foundation & superstructure

upto 6.00 mt.height including striking out joints 20 mm deep curing watering, finishing joints and providing 4182.00 Rupees Four thousand, one hundred eighty two

scaffolding as directed as comp.

12 46.80 Providing and fixing pre-cast Rubber Dye/steel dye interlocking Cncrete block 60mm thick with grade of

concrete M200 pneaumatic compressed/vibrated mechanically and as per approved design Confirming to IS

15658:2006 including 35mm Sand Layer for levelling and filling the joint with sand in prper line and level as 699.84 Rupees Six hundred ninety nine point eight four

per guidlines of IRC:SP63-2018 etc complete.

13 45.00 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm

height,15cm thick of M200 grade concrete as per approved design and including excavation for fixing in prper 404.05 Rupees Four hundred four point zero five

line and level ,fillling the joint with C:M 1:3 etc complete.(upto 10 ton)

14 497.00 Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for plastering

comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough

284.33 Rupees Two hundred eighty four point three three

finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel

including scaffolding curing etc. complete.

15 375.00 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished even and smooth in (iii) Cement mortar 1:3 (1-cement:3- 184.78 Rupees One hundred eighty four point seven eight

16 219.00 Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two

level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) 125.32 Rupees One hundred twenty five point three two

17 1091.00 Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign 40.59 Rupees Forty point five nine

matter and sand papered smooth.

18 673.00 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing the surface free from mortar droppings and other 82.97 Rupees Eighty two point nine seven

foreign matter and sand papered smooth

19 419.00 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape

even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc 73.75 Rupees Seventy three point seven five

20 33.00 Providing brick cladding on the exterior wall of a building include the use of high- quality fired clay or

engineered bricks with a minimum compressive strength of 20 MPa, laid using a mortar mix of 1 part cement to

3 parts sand, or polymer-modified adhesive for thin brick systems. The installation should be proper wall Rupees Two thousand, five hundred nineteen point nine

preparation, uniform brick placement in consistent bond patterns, and ensuring mortar joints are neat and six

properly finished should be done. The installation must comply with local building codes and standards. and as

per engeneer in Charge.

21 47.00 Providing stone crete texture on exterior walls involve applying a cement-based plaster or render base coat,

followed by a pre-mixed or site-mixed stone crete finish, which consists of crushed stone aggregates, cement,

and sand, with optional polymer additives. The finish should be applied to a clean, prepared substrate using a

trowel or spray gun to achieve the desired texture (smooth, rough, or stippled).The installation must meet local 1630.14 Rupees One thousand, six hundred thirty point one four

building codes, with proper curing, adhesion, and performance standards to ensure longevity and aesthetic

quality adn as per engineer in charge.

22 182.00 Providing and laying GVT vitrified tiles 1st quality minimum 9-10 mm thick tiles of approved make, shade

and size and thickness in flooring and fixed tiles with tile fixing adhesive bedding of approved brand

Rupees One thousand, eight hundred eighty nine point

cleaning the joints with coir brush , filling the them with epoxy grout material of K-2/kerakol /Ardex / mapie/ 1889.14

endura make and colour to be matched with shade of tiles , curing, cleaning the area with water or water with

mild acid etc complete as directed. Rate also incuded for providing 3mm wide grooves .

23 33.00 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in

Rupees One thousand, four hundred eighty seven point

skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with 1487.88

white cement slurry.

24 147.00 Providing and laying broken china mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto

779.70 Rupees Seven hundred seventy nine point eight zero

surface using white cement including rounding off junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed.

25 162.00 Anti-Termite System:Providing and laying of permanent piping technology anti-termite treatment before

flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm 1.D. with

inbuilt pressure compensation chip every 30 cm interval in the tube, having working pressure of 2 Kg/cm2 and

release rate of 1.9 Itr/hour fixed by P-clips and nails. The LLDP pipe shall be installed at the entire periphery of

the building and at internal network of building at a depth of 20 to 200 mm under floor at every 2 to 3 mtr. c/c

distance (adjusted as per building layout ) & Ends of loop pass through a PVC elbow of minimum 32 mm ID at

junction box of wall and floor level, entering into a steel reinforced grooved flexible pipe of minimum 22 mm 134.33 Rupees One hundred thirty four point three three

ID leading into junction box and the loops shall terminate in junction boxes & test every junction during

injecting chemicals for termite control treatment. The anti termite chemical Imidacloprid 30.5% SC mix as per

IS-6313 (part III) shall be injected by the pressure pump diluted with water @ 10.5 ml/5 ltr of water at the rate

of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit approved line plan for piping system and junction

boxes dully approved by Engineer-in-Charge with bond of 5 year warranty.(II)Anti Termite chemical injected

area (Chemical injecting incl. labour cost)

26 3.00 Constructing Sandwitch Platform of 18 mm thick Polished Black Granite at top and 30 mm thick Kota stone

slab flooring fitting at bottom with cementing Materials / adhsives including macking necessary grooves in

Rupees Three thousand, seven hundred seventy five

walls with Vertical Kotastone 30 mm x 2 No sandwitch thick every 60 cm to 90 cm centre to cenre including all 3775.94

point nine four

labour material of approved quality incl. full moulded round front edge fixed in wall for partition and jointed

with grey cement slurry including rubbing and polishing etc. complete.

27 53.00 Providing and fixing polished black granite stone 16mm to 18mm thick in windows and doors jambs & sills

Rupees Three thousand, three hundred ninety six point

with moulding and polishing of the stone, fixing with cement mortar and filling the joints with necessary 3396.56

materials like araldite etc. complete as directed.

28 29.00 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement 994.37 Rupees Nine hundred ninety four point three seven

29 26.00 Providing and fixing double rebate non pressed G.I. Frame (120 GSM G.I. Coating) for window & ventilation

125mm x 63mm size x 2.5mm thick and 70 to 80 microns powder coating thickness to be fixed on wall with

required size anchor fastner and back let with slots for fixing Hinges etc. complete as directed as per Rupees One thousand, four hundred sixty eight point

architectural drawings and the direction of the Engineer -in- charge with 3 nos. hinges of 100mm X4 mm &

mm dia. safety bars@ 100 mm c/c spacing to be fixed.

30 25.00 Providing and fixing complete sliding shutter solid PVC window 25mm thick factory made glazed solid PVC

window shutter consisting of frame made out of M.S. tube of 19 gauge of size 15 x 15mm for styles top, bottom

rail. M.S. frame shall have a coat of steel primer of approved make and manufacture, M.S. frame shall be

covered with 4mm thick heat mouled PVC ‘C’ channel of size 58mm x 25mm x 38 mm out of which 8mm shall

be bent at 90 degree towards inner side on front face of the window shutter forming stiles. For top rail and

bottom rails, M>S. frame shall be covered with 4mm thick, 58mm wide PVC sheet out of which 8mm shall be

bent at 90 degree towards inner side on front face and 38mm wide PVC sheet shall cover the M.S. frame at top

and bottom rail on back side of window shutter, 4mm thick 15mm wide cross PVC sheet as gap insert for top 2602.62 Rupees Two thousand, six hundred two point six two

and bottom rail. PVC sheet beading of 8mm thick (4mm x 2) to be stuck internally with solvent cement adhesive

in top and bottom rails. Glass panel will be fitted externally in the clear space available between stiles & rails

and fixed between PVC sheet of stiles and rails bent at 90 degree on front face 12mm x 123mm ‘L’ shape outer

PVC beading nailed on stiles and rails at the back side so that ‘L’ shape outer PVC beading can be removed

when required for replacement of broken glass etc. complete as per direction of etc. complete as per direction of

Engineer in charge and manufactuture’s specification.

31 372.00 Providing and fixing hand rail of M.S. tube of approved size by welding etc. to steel ladder railing, balcony

railing, staircase railing and similar works, including applying priming coat of approved steel primer. 198.77 Rupees One hundred ninety eight point seven seven

32 33.00 Providing and fixing double rebate non pressed G.I. Frame (120 GSM G.I. Coating) for doors125mm x 63mm

size x 2.5mm thick and 70 to 80 microns powder coating thickness to be fixed on wall with required size anchor

743.31 Rupees Seven hundred forty one point three one

fastner and back let with slots for fixing Hinges etc. complete as directed as per architectural drawings and the

direction of the Engineer -in- charge with 4 nos. hinges of 100mm X4 mm.

33 26.00 Providing and fixing 38mm thick water proof flush door solid core double shutter on 18mm thk granite stone

frame with 1mm thick laminated sheet on both side of the shutter having teakwood lipping edge patti of 38 mm

x 25.4 mm on all edges with Melamine Polish matching shade of laminate with Magnetic catcher triple strip

vertical type(1 No),S.S. 304 tower bolt (barrel type) 300x10 mm (1 No) (Make : Define, Kich : TBF312S), Main

door set 19mm dia mortise handle MAKE: DEFINE: Mortise handle (DF ESRH 01),(kich:Morties Handle- Rupees Three thousand, eight hundred eleven point

PRLH 193S) & 60mm X 85mm lock body with strike plate (DEFINE - Lock Body: DF- ML 100) (Kich : Lock 3811.30

body: PRMLB 9S), thumb turn cylinders 70mm (Kich : thumb turn cylinder: PRPCKN S70, Define : DF-OSK-

70) and SS matt Hinges of 100mm X 65mm X

3.2mm (Make : Kich Item No.PRBHT2B34 and Define Make - Item No. DF-BBH-04) with necessary SS

fixtures and fastenings etc. complete all SS fittings to be of SS304 matt finish as directed by Engineer-in-charge.

34 12.00 Provoding and fixing flush door shutters, solid core construction with frame of first class hardwood with cross

board and face veneer or plywood face panels, including anodised alluminium butt hinges with necessary Rupees One thousand, eight hundred twenty nine point

screws. (B) Non-decorative type and block board core anodised alluminium butt hinges in flush door shutters seven four

(2) 35 mm thick.

35 1.00 Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm @ Wt 1.094Kg

/ Rmt with colour anodized alluminium frame with 5 mm thick transparent bronze colour tinted float glass with

colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete 1301.82 Rupees One thousand, three hundred one point eight two

36 52.00 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm

Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also

having thermal conductivity0.043° w/m KC.for the best thermal Insulation . The Light weight calcium Silicate

tile shall be of approved texture Fine fissured/Spintone/Cosmos having NRC value of 0.5 & Globe having NRC

value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter Rupees One thousand, six hundred seventy four point

locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both one five

side) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made

from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of

0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm centre to centre to form

agrid of 1200X600mm and secondary cross ’T’ of length 600mm

37 133.00 Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm & earthwire of 1.5 sq. mm (green) both are

of ISI marked 1.1 kv grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be

erected concealed in /flushed on wall/ceiling , complete with 6A Tissino Type ISI marked flush type switch /

387.84 Rupees Three hundred eighty four point eight seven

bell push and accessories erected on Metal / PVC Box covered with 3 mm thick PC(Polycarbonet) /Acrylic

sheet. with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC

pipe and accessories

38 7.00 Providing & erecting Approved make Ceiling Fan with double ball bearing ISI mark with Condenser 230 volt

A.C.50 Hz 1200 mm sweep complete having 3 blades aluminium body and blade sets having ornamental design 2727.00 Rupees Two thousand, seven hundred twenty seven

shanks , canopy erected with earthing. [ Make shall be approved by Engineer in Charge]

39 7.00 Providing and fixing MS Fan clamps type 1 to 16mm dia MS bar bent to shape with hooked ends to RCC slabs

curing,laying including painting the exposed portion of loops ,all as per standard design complete. 93.93 Rupees Ninety three point nine three

40 37.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company mark/name 160 to 270 V,Power Factor more than 0.95, THD <

15 %,CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED efficiency 110 lumens/watt. LED

driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux make LED used 503.99 Rupees Five hundred three point nine nine

for luminaire. ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.) (A) Square/ Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting clips complete.IP20 (ii) 11- 15 watts, Surge-2 KV

41 3.00 Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current

device having 10 KA short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time

Rupees Two thousand, two hundred ninety two point

conforming to IS 12640 test knob facility trip free mechanism operating for rated leakage at nominal ten volt, 2292.70

complete erected including all materials lugs screws etc. completed.[b] 32A / 40A, 2 pole Single Phase

42 1.00 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having following capacity (a) 6 to 32 Amp Cat.III . 701.95 Rupees Seven hundred one point nine five

43 1.00 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used) suitable for Rupees One thousand, seven hundred fifty nine point

(A) single phase incoming and horizontal single phase outgoing (b) sheet steel double

door (IP-43). (iv)12 way.

44 1500.00 Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings

and connection etc. complete on terrace 3.95 Three point nine five

45 2.00 Providing and fixing wash down water closet wall hung (European type, W.C. Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (A) vitreous China

Pattern :(i) in white colour, including plastic seat and cover for wash down water closer with C.P. brass hinges

and rubber buffers, Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan, Providing and

6275.76 Six thousand, two hundred seventy five point seven six

fixing 32mm dual flow metropole valve including concealed body with exposed shutoff provision and round

flange of approved quality including fixing in pipe line etc. complete and providing and fixing Health Faucet

Heavy duty having pipe length of 1 rmt with hook with fitting etc. complete as directed by engineer in-charge.

(Somany,CERA, Jaquar , Hindware make)

46 2.00 Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with

fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass

handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain 2370.39 Two thousand, three hundred seventy point three nine

enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with

cistern and closet (overflow pipe to be measured and paid for separately)(A) Vitreous China (I) In white colour

47 2.00 Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal

flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm. 1619.12 One thousand, six hundred nineteen point one two

48 1.00 Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current

device having 10 KA short circuit breaking capacity and 30 mAmp. 282.16 Two hundred eighty two point one six

49 1.00 Providing and fixing Stainless steel Wall Mixer Tap 5706.50 Five thousand, seven hundred six point five zero

50 8.00 Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe

line etc. complete.(i) 20mm dia.

254.78 Two hundred fifty four point seven eight

51 2.00 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P.

brass scews.(B) 600mm x 20mm size.

616.42 Six hundred sixteen point four two

52 2.00 Providing & Fixing SS Towel Ring complete with Fittings as Directed by Engineer In Charge ( Cera, Jaguar

620.12 Six hundred twenty point one two

,Johnson Make )

53 2.00 Providing and fixing pillar cock high pressure with screws, hanks and back nuts. (i) 15mm dia. 308.73 Three hundred eight point seven three

54 3.00 Providing and fixing Screw down Quarter turn bib taps of following size (B) Brass chromium plated screw

186.83 One hundred eighty six point eight three

down Bib tap (I) 15 mm dia {Plumber, Mark, Esco equivalent brand}

55 2.00 Providing and fixing Wash Basin with single hole for piller tap with CI or MS brackets painted including

cutting hole and macking good the same but excluding fittings (A) Vitreous chaina :

(II) Oval shape wash basin 560mm x 400mm X 205 mm size in white colour including provinding and fixing Rupees Two thousand, seven hundred forty eight point

C.P. brass waste coupling of 32mm dia., chromium plated bottle trap with necessary couplings of approved 2748.48

quality, M. I. fisher union of 32mm dia., C.P brass pillar tap of 15mm dia., PVC connection pipe from stop cock

to pillar tap etc. complete.

56 15.00 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH-40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed 72.65 Rupees Seventy two point six five

including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent,

57 40.00 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH-40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed 91.84 Rupees Ninety one point eight four

including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

58 12.00 Providing laying and jointing in true line and level 40 mm dia. U.P.V.C. Pipe ( SCH-40) for cold water

including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as 148.12 Rupees One hundred forty eight point one two

directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

59 10.00 Providing laying and jointing in true line and level 50 mm dia. U.P.V.C. Pipe ( SCH-40) for cold water

including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as 195.67 Rupees One hundred ninety five point six seven

directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

60 5.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps 170.36 Rupees One hundred seventy point three six

including making good the wall, ceiling and floor etc. complete.[A] 15 mm

61 2.00 Providing and fixing Heavy Handle valve of aprroved brand & following internal dia of Brass including fixing

420.63 Rupees Four hundred twenty point six three

in pipe lines etc.complete (C) 25 mm Dia

62 2.00 Providing and fixing Heavy Handle valve of aprroved brand & following internal dia of Brass including fixing

663.43 Rupees Six hundred sixty six point four three

in pipe lines etc.complete (E) 40 mm Dia

63 1.00 Providing and fixing Heavy Handle valve of aprroved brand & following internal dia of Brass including fixing Rupees Two thousand, four hundred thirty eight point

in pipe lines etc.complete (A) 50 mm Dia one four

64 15.00 Providing laying and jointing in true line and level 160 mm diameter U.P.V.C. Type B pipe confirming to IS

13592-1992 with one end plain and other end socketed with rubbering, & fitting conforming to ISI 14735-1999

of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 160 mm diameter x 210 mm length x 196 mm high at 834.38 Rupees Eight hundred thirty four point three eight Cmt

every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent ement including cost of

65 10.00 Providing laying and jointing in true line and level 110 diameter U.P.V.C. Type B pipe confirming to IS 13592-

1992 with one end plain and other end socketed with rubbering, & fitting conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 110 mm diameter x 149 mm length x 145 mm high at 876.11 Rupees Eight hundred seventy six point one one Rmt.

every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of

66 2.00 Providing and fixing PVC Cowl vent of following dia etc complete as directed (A) 110 mm Dia 19.68 Rupees Nineteen point six eight

67 4.00 Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self cleaning design with

C.I. screaed down or higned grating including cost of cutting and making good the walls and floor 100mm inlet 634.17 Rupees Six hundred thirty four point one seven

and 50mm outlet.(C) 100mm dia.

68 3.00 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with

Rupees One thousand, two hundred ninety two point

frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps. (A) 100mm x 100mm size 1292.19

69 15.00 Providing and fixing Dual Roller - Zebra Blinds curtains with premium brand fabric, Curtain with and standard

stitching with matching threads, Curtain work includes back side premium belt for Keeping curtain channels 3700.00 Rupees Three thousand seven hundred

clip.Curtain with Premium Quality brand fabrics complete.

70 9.00 Providing & Fixing Arebian curtains with arebian channel and arebian belt on window. The curtain tepestary

colour, design fabric basic Rate of fabric (black out) 280.00 Rs./Sq.mt. & basic rate of fabric (black in)

Rs./Sq.mt. as per the instruction/choice of the engineer/user in charge, with all necessary hardware fitting, 2750.00 Rupees Two thousand, seven hundred fifty

material andlabour etc. The quoting price should be inclusive of all types of packing, forwarding, loading,

unloading, installation. As directed by the engineer in charge.

71 187.50 Providing and fixing pre-cast rubber dye inter locking concrete block 60 mm thick with grade of concrete M150

pnumatic compressed by mechanically pressed and as per approved design including 75 mm sand layer for 661.55 Rupees Six hundred sixty one point five five

levelling and filling the joint with sand in proper line and level etc complete.

PART-B COMPOUND WALL

1 210.00 ,Drilling of pilot bore hole in alluvial strata by direct rotary rig / reverse rotary rig 300mm dia (for Mehsana

692.00 Rupees Six hundred ninety two only Cmt.

2 1.50 Providing and laying foundation concrete of proportion as under by using cement, sand and machine crushed

Rupees Three Thousand two hundred twenty four and

course aggregate laid in situ including necessary temping, smooth finishing, watering and curing as directed 3424.30 Cmt.

thirty paisa only

with all leads and lifts etc complete. (a) 1:3:6 grade

3 1.30 Providing and fixing in position Fe 500D TMT for R.C.C.bored piles as per detailed drawing, including cutting,

Rupees Seventy three Thousand six hundred fiftyy six

bending hooking tying and welding complete and including forming the cage and lowering it in position.(up to 73656.44 Cmt.

and forty four paisa only

4 35.00 Providing and casting in situ Controlled Cement Concrete M-200 for well crubs including necessary shuttering Rupees four Thousand three hundred ninety and

laying, vibrating and curing complete. seventy seven paisa only

5 138.35 Providing burnt brick masonary 2nd class in cement mortar in 1:5 proportion for foundation & superstructure

upto 6.00 mt. height including striking out joints 20mm deep curing watering finishing joints and providing 4182.00 Rupees four thousand oner hundred eighty two only Cmt.

scaffolding as directed as comp.

6 1100.00 Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for plastering

comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough Rupees two hundred eighty four and thirty three paisa

finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel only

including scaffolding curing etc. complete.

7 1100.00 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing the surface free from mortar droppings and other 82.97 Rupees Eighty two and ninety seven only Cmt.

foreign matter and sand papered smooth

8 1100.00 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape

even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc 73.75 Rupees Seventy Three and Seventy Five paisa only Cmt.

In Word ::-Sixty six lakhs Nighty Nine thousand forty five Rupees and fifty Eight Paisa Only

I / We / am / are willing to carry the work at……………………………….% above / below (percent should be written in figures and words) of the

estimated rates mantioned above. Amount of my / our tender works out as under.

Estimated amount Rs……………………………. Estimated amount Rs……………………………….………..

Put to tender Rs……………………………. Put to tender Rs…………………………….…………...

Deduct………….% below Rs…………………………... Add……….% above Rs………………………………….…….

*(Please strike out whichever is not applicable)

Note 1 : All work shall be carried out as per public works Department Handbook and other Specification of Division or as Directed.

Note 2 : All the colomns in Schedule-B should be filled in ink and the total of the entries in the last colomn should be struck by the

good for work contractor under his signature

Note 3 : Rates quoted include clearance of site ( Prior commencement of work and at his close) in all respects and hold

under all conditions site,moisture,weather etc.

Note 4 : To be continued on addition sheets, if found necessary.

Signature of contractor: Executive Engineer

Panchayat Irrigation Division