SUPPLY AND INSTALLATION OF STORAGE RACKS (HEAVY DUTY AND SLOTED ANGLE RAKES), OIL LOCKER, FILE COMPACTOR,FILE ALMERIA ,PLASTIC PALLETS,HAND PALLET TRUCK AND SEMI ELECTRIC PALLET TRUCK

Heavy Duty Racks • Size(mm)H-2500L-2000W-900 • structure will be MS sheet. • Load carrying capacity per level should be 1500 kg 3 No’s compartments. • Rack up right beam should be 15X50X100X50X15 mm(Top hat batten shape) 2mm thick sheet • Pallet deck support should be at least 40X100X40 mm 2 U- channel Cribbed on all sides and 2mm thick • Bracing should be at least 25X50X25 U-channel and 2mm thick Shelve should be 1.2 mm MS thick sheet • Rack would be open from all 4sides • Finish should be double powder coated with 7 tank process Joints should be using nut bolt or hook system • Spacing from ground should be atleast150mm

Semi Electric Stacker • Its Capacityshouldbe1500kg • Its Lowered fork height Maximum 90 mm ,Overall width 1800 mm, Mast height (close height) 3000mm • Its Lift pump type will be Hydraulic Type • Handle type (tiller arm)will be Manual ,3 position control Lever to Raise, Lower and Neutral • Battery type will be Traction type lead acid 24 volt Output voltage of battery Bank 12 volt • Batteries will be120Ah • Equipment Service weight Should not be more than 400 Kg Battery charger should be auto cut off facility and equalizer mode • Control Panel should be with battery discharge indicator with hour meter and pump lockout. • Maximum lift height will be 3000 mm Minimum

Hand Pallet Truck • Its Capacity would be 2000 Kg • Its Min. fork height (h) will be 85 mm and Max. Fork Height (hl)will be 200 mm • Its Steering Wheelwouldbe200x50mm • Its Load roller Single will be 82x93 mm and Load roller Tandem will be 82x70mm • Size of fork will be 160x50 mm , Width overall forks will be 450/520/540/685 mm and Fork length will be 800/900/1000/1100 /11 50/ 1220 mm

Injection Moulded pallets • Type : Injection Moulded Perforated Deck Single Side • Size: 1200 X 1000 X 160 mm • Material : HDPE • It should have Static Load of 3000Kg (Unified Load) • It should have Dynamic Load of 1200 Kg (unified Load) It should have Racking Load of 1200Kg (Unified Load)

Slotted Angle Rack • Size(mm)H-2500L-900W-600 • Load carrying capacity per level should be 50 kg • structure will be MS sheet • 6NosShelves • Slotted Angle should be 40X40X2 mm • Shelve should be 1.2 mm MS thick sheet • Covered on 3 sides with front open • Finish should be double powder coated with 7 tank process Joints should be using nut bolt • Spacingfromgroundshouldbeatleast100mm

Oil locker • Size(mm)H-2000L-900W-475 • Load carrying capacity per level should be 50 kg • structure will be MS sheet • Size of cabinet: As per buyer choice • Thickness of the sheet 1.2 mm • Covered on 3 sides with front lock door • Each lock will have different key • Front door will have punched small hole for ventilation. • Finish should be double powder coating • Spacing from ground should be atleast 100mm

File compactor • Size(mm)-:L-2700,B-:915,H-:2200(compacted) • First and last will be single side whereas other will be Double Face Movable unit • structure will be MS sheet • Size of each cabinet  L-36inch/915mm  H-15inch/381mm  D-15inch/381mm • Number of shelves on each compartment should be 5no and there will be6 compartment (2 Twin body and 2 single body) • Thickness of outer sheet would be 2mm and inner plate would be 1.5mm thick • Load carrying capacity per level should be 50 kg It should have locking system • Finish should be double powder coated Joints should be using nut bolt • Guide rail of compactor should heavy duty channel. • Each system will be provided with stoppers on either ends of the rail to prevent the compactor unit from moving away from the rail. • Each compartment will be have handle

File Almeria • Size(mm)H-1900L-900 W-480 • Load carrying capacity per level should be 30 kg • structure will be MS sheet • 6 Nos Shelves • Shelve and body should be 1.0 mm MS thick sheet • Door will have locking system • Finish should be double powder coated with 7 tank process Joints should be using nut bolt • Spacing from ground should be at least 100mm

Life Style Interiors (BID ID -332560)

V M ENTERPRISES (BID ID -332587)

Reliable Hubs Engineering India Pvt Ltd (BID ID -331936)