Annual Rate Contract for various type of Building and Road Construction works at various places of Taluka Poshina under Taluka Panchayat Poshina. Dist.Sabarkantha

Item of work Quantity Unit Rate

1 Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and 1.00 Cum

lift. (i)R.C.C. work

2 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and 1.00 Cum

disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

3 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful 1.00 Cum

materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

4 Excavation for foundation in all sorts of soil including yellow sandy gravelly soils ,soft & hard murrum etc. in dry 1.00 Cum

condition including depositing the excavated stuff in uniform layers in banks or as and where directed etc. complete for

lead up to 500m and all lift. (BY MACHINERY) Including

5 Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not 1.00 Cum

exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.

6 Providing and laying controlled cement concrete M.150 for curing complete including cost of formwork but 1.00 Cum

excluding the cost of reinforcement for reinforced concrete work in (A) Foundations, footings,Base of columns and

7 Providing and laying controlled cement concrete M.250 and curing complete including cost of formwork but 1.00 Cum

excluding the cost of reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and

8 Providing and laying controlled cement concrete M250 and curing complete including the cost of form work 1.00 Cum

but excluding the cost of reinforcement for reinforced concrete work in Columns, pillars posts and struts Column

Up to Plinth Level

9 Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- Machine Crushed stone aggregates 40 mm 1.00 Cum

nominal size) and curing complete excluding

cost of formwork in (A) Foundation and Plinth

10 Providing and laying controlled cement concrete M.250 and curing complete 1.00 Cum

including the cost of form work but excluding the cost of reinforcement for reinforced concrete work for

Ground and Plinth Beams

11 Providing and laying controlled cement concrete M.200 and curing complete including the cost of form work 1.00 Cum

but excluding the cost of reinforcement for

reinforced concrete work in Columns, Pillars posts and struts, For All Floors.

12 Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork 1.00 Cum

(Vertical fins and vertical sun breakers.) and

reinforcement for reinforced concrete work in (B) Walls, for all floor level

13 Providing and laying controlled cement concrete M.200 and curing complete 1.00 Cum

including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in Beams

For All Floors.

14 Providing and laying controlled cement concrete M.200 and curing complete including the cost of form work 1.00 Cum

but excluding the cost of reinforcement for reinforced concrete work in Slab for All Floors.

15 Providing and laying controlled cement concrete M.200 and curing complete including the cost of form work 1.00 Cum

but excluding the cost of reinforcement for

reinforced concrete work in Lintels For All Floors.

16 Providing and laying controlled cement concrete M.200 and curing complete including the cost of form work 1.00 Cum

but excluding the cost of reinforcement for

reinforced concrete work in Chajja For All Floors.

17 Providing & Laying in position "NOMINAL MIX" cement 1.00 Cum

concrete using cement, sand and crushed aggregate by mass and machine mix for C.C./R.C.C work incl. necessary

formworks centering, scaffolding, compaction by vibrator, curing as directed with all lead & lift etc complete

Without Dewatering and excluding costof steel reinforcement.(b) C. C. Nominal

Mix, M-10 and MSA-40 mm

18 Providing & Laying in position "NOMINAL MIX" cement concrete using cement, sand and crushed aggregate by mass 1.00 Cum

and machine mix for C.C./R.C.C work incl. necessary formworks centering, scaffolding, compaction by vibrator, curing

as directed with all lead & lift etc complete Without Dewatering and excluding cost of steel reinforcement.(A) For

Foundation concrete / General purpose (c) C. C. Nominal Mix, M-15 and MSA-20 mm

19 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, 1.00 Kg.

binding and placing in position complete for All Floor

20 Providing throating or plaster drip and moulding to R.C.C. Chhajja by making 5mm to 1.00 Rmt

15mm wide grove as per design etc. complete

21 Half brick masonry in common burnt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in 1.00 Sqmt

Superstructure above plinth level upto All Floor level in Cement mortar 1:4 (1- Cement : 4 -coarse sand

(Conventional).

22 Providing & Fixing Chicken mesh for joint between brick work & RCC work 1.00 Sqmt

fixing with nail & GI washer as per director in charge

23 Providing 15mm thick cement mala plaster in single coat on Rough (Similar)side of single or half brick walls for 1.00 Sqmt

interior plastering and finished even and smooth fininshing with a floating coat of neat cement slurry in (i) Cement

mortar 1:3 (1-cement:3-sand), 10x10 mm groves etc. Complete for All

24 Providing 10mm thick cement mala plaster in single coat on brick/concrete walls for interior plastering and finished 1.00 Sqmt

even and smooth fininshing with a floating coat of neat cement slurry in (i)Cement mortar 1:3 (1-cement:3-sand).

for All Floors.

25 20mm thick sand faced cement plaster with Gutka Finish on walls upto height 15 metres above ground level consisting 1.00 Sqmt

of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1- sand) with 5mm grooves, etc. complete.

26 Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to 1.00 Sqmt

give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter

papered smooth.

27 Wall painting (three coats) with plastic emulsion paint of approved brand and manufacture on undecorated 1.00 Sqmt

wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

28 Ceiling painting (three coats) with plastic emulsion paint of approved brand and manufacture on ceiling and soffits 1.00 Sqmt

of slab surface to give an even shade including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

29 Finishing wall with weather proof exterior emulsion paint (two coats) with Damp Proof Coating (one coat) on 1.00 Sqmt

wall surface to give an required shape even shade after thoroughly brushing the surface to remove all dirt,

remains of loose powdered materials.etc complete

30 Providing and laying polished Blue Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 1.00 Sqmt

(1- cement : 6-coarse sand) or L.M. 1:1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement

slurry mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

31 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of 1.00 Sqmt

concrete M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS

15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per

guidlines of IRC :

SP 63-2018 etc. Complete.

32 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 1.00 Sqmt

coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the

complete for DARK shade

33 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of steps and dedo on 10mm thick 1.00 Sqmt

cement plaster 1:3 (1-cement : 3-coarse sand)

and jointed with white cement slurry

34 P & L Mate Finished Antiskid Ceramic 10 mm thick tile flooring over 20 mm (average) base of cement mortar 1.00 Sqmt

1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete

35 Providing and laying coloured glazed tiles of the size 300 mm x 450 mm x 8 mm in skirting, risers of steps and 1.00 Sqmt

dedo on 10 mm. thick cement plaster 1:3 (1 cement

: 3 coarse sand) & jointed with white cement slurry.

36 Providing and fixing Machine cut, Free edges, Mirror Polished Granite stone slab flooring 18mm thick laid 1.00 Sqmt

on 20mm (Average) thick base of cement mortar 1:6 (1-cement

: 6-coarse sand) for Trade & Riser including Half Round moulding front edge of trade jointed with grey cement

slurry mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete.

37 Providing and fixing Machine cut, Free edges, Polished Granite stone slab flooring 18mm thick for vertical 1.00 Sqmt

wall/Doors/Windows Sill, Jams for cladding

as per design including full moulded round inside edge and laid on10mm thick base of cement mortar 1:3 (1-cement :

3-coarse sand) jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing

and polishing etc. complete.

38 Providing and fixing Machine cut Bothside mirror polished kota stone in single piece (Max 150 cm long and width upto 1.00 Sqmt

45 cm with both side polished) for horizontal Shelves including makng grooves & Fixing the same in Brick/

concrete wall finished with flush pointing, round open edge

39 Providing and laying water prooofing treatment with china mosaic tiles flooring over avg 50 mm C.C. 1:2:4 1.00 Sqmt

bedding maintaining slope for plain and curve surface & 12 mm to 20 mm broken pieces not more than 2.5 cm of

ceramic/ of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar

creme out upto surface using white cement including rounding off junctions and extending them upto 15 cm along the

wall,clearing with

water and oxalic acid etc. as directed.

40 Constructing Sandwich Platform of 18mm thick polished black or selected granite at top and 25 mm thick kota 1.00 Sqmt

stone with 75cm height with necessary support using 20mm thick cement mortar 1:3 for sandwich and fitting at

bottom & edges with waterproof rigid adhesive including making necessary grooves in walls with vertical

support of double kota stonr sandwich every 60cm centre to centre including all labour material of approved

quality including full

moulded round front edge fixed in wall for partition.

41 Providing and fixing flush door with Single shutters, solid core construction with frame of Anodized 1.00 Sqmt

Alluminium section (weight not less than 1.1 kg/mt.) with cross board and finished with 1 mm thick laminate

on both side of shutter, machine glued PVC beading on periphery including 30cm long Stainless Steel Pipe handle on

both side SS ASIS 304 grade, SS Stopper 20cm, SS Aldrop 30cm both side, anodised alluminium butt hinges with

necessary screws. (B) Non-decorative

type and block board core anodised alluminium butt hinges in flush door shutters (2) 35 mm

42 Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 127mm 1.00 Sqmt

x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track member size 122.20mm x 31.75mm x 1.10mm@ wt

1.205 kg/m, vertical member of size 122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm@ 0.456kg/mt

,vertical member of size 40mm x 18mm x 1.29mm @ 0.456 kg/mt with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as

per details etc complete for window. With Mosquito net shutter in outer

43 Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm 1.00 Sqmt

x 24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track member size 92mm x 31.75mm x 1.30mm,@

Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding

shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm

x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with

rubber gasket and airlock strip anodiazed aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details

etc. With Mosquito net shutter in outer track.

44 Providing and fixing Standard extruded colour anodized alluminium section frame weight 1.094 1.00 Sqmt

kg/Rmt.with Adjectable Glass Louvers of 5 mm thick transparent glass colour tinted float glass with transparent

silicon gasket with allu. Powder coated fittings & fixtures.

45 Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings 1.00 Litre

and connection etc. complete on terrace

46 Providing, laying and jointing in true line and level 110 diameter U.P.V.C (Type B) conforming to IS 13592- 1.00 Rmt

1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm

center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

47 Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm 1.00 Nos.

48 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal 1.00 Nos.

49 Providing and fixing wash down water closet (Wall Hung type, W.C. Pan) with integral P or S trap, Health 1.00 Nos.

Fauset Heavy Duty with hook and PVC dual flush tank with complete fittings including jointing the trap with soil

pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A)

vitreous China Pattern :(i) in white colour

50 Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed concrete, foot 1.00 Nos.

reste and trap to be measured and paid for separately) (A) Vitreous China.(I) Long pattern = White colour

including 100mm size P or S trap for water closet squatting pan including jointing the trap with the pan and

soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand) with 25mm dia. chromium plated brass half trun flush

cock of approved quality including fixing in pipe line xing G.I. inlet connection for flush pipe with W.C. Pan

51 Providing and fixing washbasin (ii) Flat Back washbasin 550 mm x v 400mm size. 1.00 Nos.

(i) In white colour including with approved sanitary grade material with CP waste coupling, waste pipe, 15mm dia

Pillar & Stop Cock of approved brand with connection 15mm dia flexiable pvc pipe etc. complete

53 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting holes in walls 1.00 Nos.

(C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size including approved sanitary grade material with

CP waste coupling, waste pipe, 15mm dia Pillar & Stop Cock of approved brand with connection 15mm dia

flexiable pvc pipe etc. complete

54 Providing and fixing brass screw down stop tap.(A) 15mm dia. 1.00 Nos.

55 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following 1.00 Nos.

nominal diameter of self cleansing design with

C.I scread down or hinged grating including the cost of cutting and making good the walls.

56 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having 1.00 Nos.

crushing strength not less than 35Kg/Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(ii)

Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or two inlets.

57 Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with dry masonry 1.00 Nos.

work at top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing

curing etc. complete as directed.

58 Applying general insecticide pest control treatment to floors, cupboards etc including labour materials etc. 1.00 Sqmt

complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075% concentration by mass) is recommended

10.5ml chemical diluted with 5 liters of water application 0.5 litre chemical

/Sqm of surface is recommended as per I.S.

59 Providing and fixing Safety Grills of required pattern for windows/door using MS polished bars, Rectangular 1.00 Kg

CRS Pipes of size 50mm x 30mm x 2mm or Required at required spacing as per design and hold fast with

coach bolts including one coat of and two coats of matt finished oil

painting etc. complete

60 Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and 1.00 Quintal

applying a priming coat of red lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and

61 Providing, Fabricating, supplying, and ercting Parking Shed of required size and shape (as per site conditions and 1.00 Sqmt

Engineer in charge's Direction), including all necessary civil and structural works. The Shed shall be made of

M.S. tubular/structural steel sections (confirming to IS standards) with proper welding, bolting, and fixing arrangement.

62 Brick work using common burnt clay building bricks having crushing strength not less 1.00 Cum

than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (Conventional)

63 Providing and laying controlled cement concrete M.150 and curing complete 1.00 Cum

excluding the cost of formwork and reinforcement for reinforced concrete work for Coping

64 Providing & laying weep hole in Aburtments, and returns by using A.C. pipe of 100mm including laying in proper 1.00 Each

grede and jointing the completed as per detailed

65 Drilling of pilot bore hole of size 250/300 mm diameter at above site by mud finish 1.00 Rmt

direct rotary rig etc. complete

66 Reaming of 250/300 mm diameter pilot bore hole to size 450 mm diameter including assembling, lowering 1.00 Rmt

housing, casing strainer pipes with gravel packing

and clay ball packing etc. complete.

67 Providing 600 CFM / 150 PSI capacity air compressor upto available of sand free 1.00 Job

discharge ( Minimum 6.0 Hours)

68 Supply of reducer made frim 6 mm thick plate (M.S.) for ERW pipe of size (ii) 1.00 Nos.

200 mm dia. x 250 mm dia. X 600 mm length

69 Supply of 200 mm diameter V-wire screen pipe of slot size 1.00 Rmt

1.0 mm nominal hole etc. complete.

70 Supply of M.S. Bore clamps with 3 holes on either side with nuts and bolts of standard make and suitable size (g) 1.00 Pair

750 mm x 75 mm x 16 mm flat to 200 mm dia. Pipe.

71 Supply of Bore Plug having 100 mm height made from M.S. plate with 3 holes at equal distance on circumference 1.00 Nos.

for nuts-bolts type, locking arrangement with nut-bolts & lock nuts of standard make complete. (b) from 5 mm thick

M.S. plate (for top also) (ii) suitable for 200 mm dia. pipe.

72 Supply of M.S. Bail Plug having length of 0.45 mtr from medium class pipe as 1.00 Nos.

per I.S.S. suitable for (b) 200 mm diameter pipe etc. complete.

73 Supply of Steel Bent plates suitable to ERW pipe for (b) 200 mm diameter and 150 x 1.00 Nos.

150 x 6 mm size etc. complete.

74 Charges for uptron make Electrologger (with carting ) of pilot bore hole etc. 1.00 Job

75 Providing and erecting PVC corrugated Flexible conduit with required numbers of coupling, PVC bushes, Check- 1.00 Rmt

nuts etc. complete of following sizes. (3) 32 mm diameter

76 Lowering of submersible motor pump set complete with required. Nos. and size of casing pipes erected by means 1.00 Job

of proper chain pulley block & pipe wrenches after checking of threads of each pipe with coupling to take the

load of the pump set and pipe assembly filled up with water. (B) Above 60 mtr and up to 120 mtr

77 Supplying and erecting approved make motor control cubical panel (Direct - on - line) made from 16 G. 1.00 Each

CRCA sheet duly epoxy powder painted inside and outside with hinged doors and locking, arrangement consisting

of suitable size of ON-OFF isolator (AC - 3/23 duty) main fuses, single phasing preventer, indicating lamps for R-

Y-B phases, overload relay, automatic water level controller, Ammeter, Voltmeter each with two way selector

switch incoming, wires duly socket crimped, main contactor & overload relay, start-stop push buttons, to be erected

on angle iron frame grouted on wall as directed. The isolator, overload relay & contactors will be of L&T, Seimens or

BCH make only (a)DOL upto 7.50 H.P.

78 Supplying and erecting XLPE (IS:7098) (I)-88 ISI unarmoured copper 1.00 Rmt

cable 1.1 KV grade to be erected as directed of following size. (E) 3 core 2.5 Sq. mm

79 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water 1.00 Rmt

including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe

and joints and fixing

the same with adhesive solvent, including cost of all

80 Providing and fixing butterfly valve of IS approved brand 1.00 Nos.

81 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out 1.00 Cum

and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(C) Hard Murrum

82 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less 1.00 Nos

83 Box cutting the road surface to proper slope and camber for making a base for 1.00 Cum

road work including removing the excavated stuff and depositing on the road side slope as directed upto

84 Construction of B.I.T.C. granular sub base by providing granular material of Grading II, spreading in uniform 1.00 Cum

layers with motor grader on prepared surface , mixing by mix in place method with front end loader at

OMC , and compacting with vibratory roller to achieve the desired

density ,complete as per Clause

85 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam 1.00 Cum

(Grade II) (B.T. Metal of size 45 to 63 mm) specification including spreading in uniform thickness, hand packing,

rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite

type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to

the required density.

86 Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and 1 Sqm

G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick

87 Construction of Cattle trap made from ISMC 100 border and G.I. pipe 50 mm dia. Heavy duty at 12cm spacing by 1 Sqm

welding and for supports 2 nos. I.S.M.C. 100x75x6 section fixing in

prepared chamber as per drawing.