Annual Rate contract of Repairing, Maintenance and SITC of All types of Electrical Works in all wards of, MMC. One Year

Name of Work :-Annual Rate contract of Repairing, Maintenance & SITC of All types of Electrical Works in all

CHAPTER - I Electric wirings

NOTE:1. For use of ZHFR/HRFR Copper wires in place of FRLS PVC wires add 5% in Item of

Point wiring Item No 1-1-1 to 1-2-6 & 1-5-1 & 1-5-2.

NOTE:-2 For point wiring in bathroom and W/C and washbasin area in residential quarters

reduce overall rate by 50% of point wiring for light.

SECTION - 1-1 Point wiring in Copper [TISSINO]

Cost of Cost of

Item No Description Unit Total

Materials Labour

1-1-1. Point wiring for Light / Fan/ Bell/ Primary Point with

2-1.5 sq. mm & earth wire of 1.5 sq. mm (green)

both are of ISI marked 1.1 kv grade FRLS PVC

insulated multi strand copper wires upto max length

of 10 mt, in below type of pipe erected with 6A

Tissino Type ISI marked flush type switch / bell

push and accessories erected on Metal /

PVC/Wooden Box covered with 3 mm thick

PC(Polycarbonate) /Acrylic/Laminated sheet. with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and 280.00 71.00

accessories erected flushed on wall/ceiling Pt

(b) with 16 swg(1.6 mm thick) HGS metal conduit 385.00 83.00

pipe and accessories painted black erected flushed Pt.

on wall/ceiling complete

( c) with oval conduit /PVC casing capping double 250.00 47.00

lock type erected flushed on wall/ceiling complete Pt.

(d) partial PVC pipe and drops in oval conduit / PVC 266.00 60.00

casing capping erected flushed on wall/ceiling Pt.

(e) in existing pipe erected flushed on wall/ceiling 208.00 47.00

(f) with medium class Rigid PVC pipe and 280.00 107.00

accessories erected concealed in wall/ceiling Pt

(g) with 16 swg(1.6 mm thick) HGS metal conduit 385.00 119.00

pipe and accessories painted black erected Pt.

concealed in wall/ceiling complete

( h) with oval conduit /PVC casing capping double 250.00 83.00

lock type erected concealed in wall/ceiling Pt.

(i) partial PVC pipe and drops in oval conduit / PVC 266.00 94.00

casing capping erected concealed in wall/ceiling Pt.

(j) in existing pipe erected concealed in wall/ceiling 208.00 83.00

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

1-1-2. Point wiring for independent PLUG with following

size mains earth wire of 1.5 sq.mm (green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires upto 10 mt length, in

following below of pipe erected complete with ISI

marked 3 / 5 Pin socket and tissino type switch

erected with earth continuity connection erected on

Metal / PVC/Wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic/Laminated sheet.

(A) [A] For 6 amp plug and 6 amp switch with 2-1.5

sq. mm Cu. Mains from near by switchboard/db

board upto 6 mt.

(a) with medium class Rigid PVC pipe and 250.00 60.00

accessories erected flushed on wall/ceiling Pt.

(b) with 16 swg(1.6 mm thick) HGS metal conduit 354.00 71.00

pipe and accessories painted black erected flushed Pt.

on wall/ceiling complete

( c) with oval conduit /PVC casing capping double 219.00 47.00

lock type erected flushed on wall/ceiling complete Pt.

(d) partial PVC pipe and drops in oval conduit / PVC 234.00 54.00

casing capping erected flushed on wall/ceiling Pt.

(e) in existing pipe erected flushed on wall/ceiling 176.00 47.00

(f) with medium class Rigid PVC pipe and 250.00 94.00

accessories erected concealed in wall/ceiling Pt.

(g) with 16 swg(1.6 mm thick) HGS metal conduit 354.00 107.00

pipe and accessories painted black erected Pt.

concealed in wall/ceiling complete

( h) with oval conduit /PVC casing capping double 219.00 83.00

lock type erected concealed in wall/ceiling Pt.

(i) partial PVC pipe and drops in oval conduit / PVC 234.00 89.00

casing capping erected concealed in wall/ceiling Pt.

(j) in existing pipe erected concealed in wall/ceiling 176.00 83.00

(B) [B] 6/16A Plug and 16 amp switch with 2-2.5 sq.

mm Cu. Mains from mcb d b boards.

(a) with medium class Rigid PVC pipe and 442.00 47.00

accessories erected flushed on wall/ceiling Pt.

(b) with 16 swg(1.6 mm thick) HGS metal conduit 525.00 60.00

pipe and accessories painted black erected flushed Pt.

on wall/ceiling complete

(c) with oval conduit /PVC casing capping double 354.00 47.00

lock type erected flushed on wall/ceiling complete Pt.

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

(d) partial PVC pipe and drops in oval conduit / PVC 421.00 47.00

casing capping erected flushed on wall/ceiling Pt.

(e) in existing pipe erected flushed on wall/ceiling 270.00 47.00

(f) with medium class Rigid PVC pipe and 442.00 83.00

accessories erected concealed in wall/ceiling Pt.

(g) with 16 swg(1.6 mm thick) HGS metal conduit 525.00 94.00

pipe and accessories painted black erected Pt.

concealed in wall/ceiling complete

(h) with oval conduit /PVC casing capping double 354.00 83.00

lock type erected concealed in wall/ceiling Pt.

(i) partial PVC pipe and drops in oval conduit / PVC 421.00 83.00

casing capping erected concealed in wall/ceiling Pt.

(j) in existing pipe erected concealed in wall/ceiling 270.00 83.00

(C) [C] 6/16A Plug and 16 A switch with 2-4 sq.mm

Cu. Mains with 2.5 sq.mm ( green) earthing wire

(a) with medium class Rigid PVC pipe and 541.00 60.00

accessories erected flushed on wall/ceiling Pt.

(b) with 16 swg(1.6 mm thick) HGS metal conduit 634.00 71.00

pipe and accessories painted black erected flushed Pt.

on wall/ceiling complete

(c) with oval conduit /PVC casing capping double 479.00 60.00

lock type erected flushed on wall/ceiling complete Pt.

(d) partial PVC pipe and drops in oval conduit / PVC 520.00 60.00

casing capping erected flushed on wall/ceiling Pt.

(e) in existing pipe erected flushed on wall/ceiling 374.00 60.00

(f) with medium class Rigid PVC pipe and 541.00 94.00

accessories erected concealed in wall/ceiling Pt.

(g) with 16 swg(1.6 mm thick) HGS metal conduit 634.00 107.00

pipe and accessories painted black erected Pt.

concealed in wall/ceiling complete

(h) with oval conduit /PVC casing capping double 479.00 94.00

lock type erected concealed in wall/ceiling Pt.

(i) partial PVC pipe and drops in oval conduit / PVC 520.00 94.00

casing capping erected concealed in wall/ceiling Pt.

(j) in existing pipe erected concealed in wall/ceiling 374.00 94.00

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

1-1-3. Point wiring for on board looped PLUG with tissino

type single pole ISI marked Switch and Socket

erected with necessary connections erected on

wooden /Metal/ PVC Box covered with 3 mm thick

PC(Polycarbonate) /Acrylic sheet for open /

concealed wiring for following size.

[A] For 6 Amp. Pt. 53.00 13.00

1-1-4. Point wiring for Tissino / Modular secondary light

point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires, in below

type of pipe to be erected complete with earth

continuity and necessary connection with primary

light with accessories erected on Metal / PVC /

wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder /

ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point.

(a) with medium class Rigid PVC pipe and 100.00 31.00

accessories erected flushed on wall/ceiling Pt.

(b) with 16 swg(1.6 mm thick) HGS metal conduit 156.00 36.00

pipe and accessories painted black erected flushed Pt.

on wall/ceiling complete

(c) with oval conduit /PVC casing capping double 79.00 31.00

lock type erected flushed on wall/ceiling complete Pt.

(d) partial PVC pipe and drops in oval conduit / PVC 89.00 31.00

casing capping erected flushed on wall/ceiling Pt.

(e) in existing pipe erected flushed on wall/ceiling 53.00 31.00

(f) with medium class Rigid PVC pipe and 100.00 66.00

accessories erected concealed in wall/ceiling Pt.

(g) with 16 swg(1.6 mm thick) HGS metal conduit 156.00 71.00

pipe and accessories painted black erected Pt.

concealed in wall/ceiling complete

(h) with oval conduit /PVC casing capping double 79.00 66.00

lock type erected concealed in wall/ceiling Pt.

(i) partial PVC pipe and drops in oval conduit / PVC 89.00 66.00

casing capping erected concealed in wall/ceiling Pt.

(j) in existing pipe erected concealed in wall/ceiling 53.00 66.00

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

1-1-5. Point wiring for Two Way Controlled Light Point with

2-1.5 sq.mm & earth wire of 1.5 sq.mm (green)

both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr

length, in following type of pipe to be erected

concealed in / flushed on wall / ceiling complete

with 6A Tissino Type ISI marked accessories with

earth continuity erected on Metal/PVC//Wooden

box covered with 3 mm thick PC(Polycarbonate) /

Acrylic sheet. with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and 301.00 71.00

accessories erected flushed on wall/ceiling Pt.

(b) with 16 swg(1.6 mm thick) HGS metal conduit 421.00 83.00

pipe and accessories painted black erected flushed Pt.

on wall/ceiling complete

(c) with oval conduit /PVC casing capping double 280.00 47.00

lock type erected flushed on wall/ceiling complete Pt.

(d) partial PVC pipe and drops in oval conduit / PVC 297.00 60.00

casing capping erected flushed on wall/ceiling Pt.

(e) in existing pipe erected flushed on wall/ceiling 229.00 47.00

(f) with medium class Rigid PVC pipe and 301.00 107.00

accessories erected concealed in wall/ceiling Pt.

(g) with 16 swg(1.6 mm thick) HGS metal conduit 421.00 119.00

pipe and accessories painted black erected Pt.

concealed in wall/ceiling complete

(h) with oval conduit /PVC casing capping double 280.00 83.00

lock type erected concealed in wall/ceiling Pt.

(i) partial PVC pipe and drops in oval conduit / PVC 297.00 94.00

casing capping erected concealed in wall/ceiling Pt.

(j) in existing pipe erected concealed in wall/ceiling 229.00 83.00

Section - 1-2 Point wiring in Copper

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

1-2-1. Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling

Cat. III Pt. 374.00 71.00

(b) with 16 swg HGS metal conduit pipe and

accessories painted black erected flushed on

wall/ceiling complete

Cat. III Pt. 479.00 94.00

(c) with oval conduit /PVC casing capping double

lock type erected flushed on wall/ceiling complete

Cat. III Pt. 343.00 60.00

(d) partial PVC pipe and drops in oval conduit / PVC

casing capping erected flushed on wall/ceiling

Cat. III Pt. 321.00 60.00

(e) in existing pipe erected flushed on wall/ceiling

Cat. III Pt. 312.00 60.00

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

Cat. III Pt. 374.00 107.00

(g) with 16 swg HGS metal conduit pipe and

accessories painted black. erected concealed in

wall/ceiling complete

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

Cat. III Pt. 479.00 131.00

(h) with oval conduit /PVC casing capping double

lock type erected concealed in wall/ceiling

Cat. III Pt. 343.00 94.00

(i) partial PVC pipe and drops in oval conduit / PVC

casing capping erected concealed in wall/ceiling

Cat. III Pt. 321.00 94.00

(j) in existing pipe erected concealed in wall/ceiling

Cat. III Pt. 312.00 94.00

1-2-2. Point wiring for FAN with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of .ISI marked

KV Grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free

EME step type electronic fan regulator mounted

and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling

Cat. III Pt. 561.00 71.00

(b) with 16 swg HGS metal conduit pipe and

accessories painted black erected flushed on

wall/ceiling complete

Cat. III Pt. 666.00 94.00

(c) with oval conduit /PVC casing capping double

lock type erected flushed on wall/ceiling complete

Cat. III Pt. 530.00 60.00

(d) partial PVC pipe and drops in oval conduit / PVC

casing capping erected flushed on wall/ceiling

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

Cat. III Pt. 508.00 60.00

(e) in existing pipe erected flushed on wall/ceiling

Cat. III Pt. 457.00 60.00

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

Cat. III Pt. 561.00 107.00

(g) with 16 swg HGS metal conduit pipe and

accessories painted black. erected concealed in

wall/ceiling complete

Cat. III Pt. 666.00 131.00

(h) with oval conduit /PVC casing capping double

lock type erected concealed in wall/ceiling

Cat. III Pt. 530.00 94.00

(i) partial PVC pipe and drops in oval conduit / PVC

casing capping erected concealed in wall/ceiling

Cat. III Pt. 508.00 94.00

(j) in existing pipe erected concealed in wall/ceiling

Cat. III Pt. 457.00 94.00

1-2-3. Point wiring for Individual Plug with & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with

following type of accessories.

(I) [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm

Cu. Wire from nearby switchboard/mcb db board

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

Cat. III Pt. 411.00 60.00

(b) with 16 swg HGS metal conduit pipe and

accessories painted black erected flushed on

wall/ceiling complete

Cat. III Pt. 515.00 71.00

(c) with oval conduit /PVC casing capping double

lock type erected flushed on wall/ceiling complete

Cat. III Pt. 380.00 47.00

(d) partial PVC pipe and drops in oval conduit / PVC

casing capping erected flushed on wall/ceiling

Cat. III Pt. 395.00 54.00

(e) in existing pipe erected flushed on wall/ceiling

Cat. III Pt. 338.00 47.00

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

Cat. III Pt. 411.00 94.00

(g) with 16 swg HGS metal conduit pipe and

accessories painted black. erected concealed in

wall/ceiling complete

Cat. III Pt. 515.00 107.00

(h) with oval conduit /PVC casing capping double

lock type erected concealed in wall/ceiling

Cat. III Pt. 380.00 83.00

(i) partial PVC pipe and drops in oval conduit / PVC

casing capping erected concealed in wall/ceiling

Cat. III Pt. 395.00 89.00

(j) in existing pipe erected concealed in wall/ceiling

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

Cat. III Pt. 338.00 83.00

(II) [II] For 16A Plug and 16 amp switch with 2-2.5

sq.mm Cu. Wire from mcb db board.

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling

Cat. III Pt. 644.00 60.00

(b) with 16 swg HGS metal conduit pipe and

accessories painted black erected flushed on

wall/ceiling complete

Cat. III Pt. 727.00 71.00

(c) with oval conduit /PVC casing capping double

lock type erected flushed on wall/ceiling complete

Cat. III Pt. 561.00 47.00

(d) partial PVC pipe and drops in oval conduit / PVC

casing capping erected flushed on wall/ceiling

Cat. III Pt. 618.00 47.00

(e) in existing pipe erected flushed on wall/ceiling

Cat. III Pt. 479.00 47.00

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

Cat. III Pt. 644.00 94.00

(g) with 16 swg HGS metal conduit pipe and

accessories painted black. erected concealed in

wall/ceiling complete

Cat. III Pt. 722.00 107.00

(h) with oval conduit /PVC casing capping double

lock type erected concealed in wall/ceiling

Cat. III Pt. 561.00 83.00

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

(i) partial PVC pipe and drops in oval conduit / PVC

casing capping erected concealed in wall/ceiling

Cat. III Pt. 618.00 83.00

(j) in existing pipe erected concealed in wall/ceiling

Cat. III Pt. 479.00 83.00

(III) [III] For 16A Plug and 16 amp switch with 2-4

sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing

wire from mcb d b board.

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling

Cat. III Pt. 769.00 60.00

(b) with 16 swg HGS metal conduit pipe and

accessories painted black erected flushed on

wall/ceiling complete

Cat. III Pt. 862.00 71.00

(c) with oval conduit /PVC casing capping double

lock type erected flushed on wall/ceiling complete

Cat. III Pt. 707.00 60.00

(d) partial PVC pipe and drops in oval conduit / PVC

casing capping erected flushed on wall/ceiling

Cat. III Pt. 748.00 60.00

(e) in existing pipe erected flushed on wall/ceiling

Cat. III Pt. 602.00 60.00

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

Cat. III Pt. 769.00 94.00

(g) with 16 swg HGS metal conduit pipe and

accessories painted black. erected concealed in

wall/ceiling complete

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

Cat. III Pt. 862.00 107.00

(h) with oval conduit /PVC casing capping double

lock type erected concealed in wall/ceiling

Cat. III Pt. 707.00 94.00

(i) partial PVC pipe and drops in oval conduit / PVC

casing capping erected concealed in wall/ceiling

Cat. III Pt. 748.00 94.00

(j) in existing pipe erected concealed in wall/ceiling

Cat. III Pt. 602.00 94.00

1-2-4. Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on PVC

/ Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories

Cat. III Pt. 219.00 36.00

1-2-5. Point wiring for Two Way Controlled Light Point with

2-1.5 sq.mm & earth wire of 1.5 sq.mm (green)

both are of .ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires erected in below

type of pipe with 6A Modular type switches and

following type of accessories erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or

ceiling rose or H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling

Cat. III Pt. 479.00 83.00

(b) with 16 swg HGS metal conduit pipe and

accessories painted black erected flushed on

wall/ceiling complete

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

Cat. III Pt. 582.00 94.00

(c) with oval conduit /PVC casing capping double

lock type erected flushed on wall/ceiling complete

Cat. III Pt. 457.00 60.00

(d) partial PVC pipe and drops in oval conduit / PVC

casing capping erected flushed on wall/ceiling

Cat. III Pt. 426.00 60.00

(e) in existing pipe erected flushed on wall/ceiling

Cat. III Pt. 415.00 60.00

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

Cat. III Pt. 479.00 119.00

(g) with 16 swg HGS metal conduit pipe and

accessories painted black. erected concealed in

wall/ceiling complete

Cat. III Pt. 582.00 131.00

(h) with oval conduit /PVC casing capping double

lock type erected concealed in wall/ceiling

Cat. III Pt. 457.00 94.00

(i) partial PVC pipe and drops in oval conduit / PVC

casing capping erected concealed in wall/ceiling

Cat. III Pt. 426.00 94.00

(j) in existing pipe erected concealed in wall/ceiling

Cat. III Pt. 415.00 94.00

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

1-2-6. Providing following type of Modular Type

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge.

(1)One No. SP 6 Amp.

Cat.II Ea. 114.00 10.00

Cat.III Ea. 140.00 10.00

(2) One No 5 pin plug

Cat.II Ea. 114.00 10.00

Cat.III Ea. 140.00 10.00

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang

Cat.II Ea. 120.00 10.00

Cat.III Ea. 149.00 10.00

[B] For Two Gang

Cat.II Ea. 159.00 10.00

Cat.III Ea. 198.00 10.00

(4) TV Co-axial Socket outlet

Cat.II Ea. 129.00 10.00

Cat.III Ea. 149.00 10.00

(5) Electronic hum Free steps EME Fan regulator

Cat.II Ea. 328.00 10.00

Cat.III Ea. 385.00 10.00

(6) Fuse units 10Amp. or 16 Amp.

Cat.II Ea. 110.00 10.00

Cat.III Ea. 169.00 10.00

(7) Blank Plate Single

Cat.I Ea. 12.00 0.00

Cat.II Ea. 16.00 0.00

Cat.III Ea. 25.00 0.00

(8) Computer RJ-45 socket

Cat.II Ea. 129.00 10.00

Cat.III Ea. 149.00 10.00

(9) 16 Amp. SP one way switch

Cat.II Ea. 120.00 10.00

Cat.III Ea. 169.00 10.00

(10) 6/16Amp. Universal socket

Cat.II Ea. 129.00 10.00

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

Cat.III Ea. 188.00 10.00

(11) 6 Amps. Bell Push

Cat.II Ea. 100.00 10.00

Cat.III Ea. 140.00 10.00

(12) 6Amp. / 16 Amp. Two Way switch

Cat.II Ea. 120.00 10.00

Cat.III Ea. 159.00 10.00

(13) 6A/10A/16A/20A/25A/32A Single pole Modular

Cat.II Ea. 257.00 10.00

Cat.III Ea. 297.00 10.00

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole

Modular MCB Switch

Cat.II Ea. 317.00 10.00

Cat.III Ea. 396.00 10.00

(15) 32 Amps. DP switch with Indicator

Cat.II Ea. 218.00 10.00

Cat.III Ea. 268.00 10.00

(16) 32 Amp. DP Main Switch Operating with

Cat.II Ea. 308.00 10.00

Cat.III Ea. 347.00 10.00

(17-a) For 400W / 450 watt One Module Electronic

Cat. III Ea. 308.00 10.00

(17-b) For 600 / 650 watt Two module Electronic

Cat. III Ea. 385.00 10.00

(17-c) For 1000 watt two module Electronic Dimmer

Cat. III Ea. 584.00 10.00

(18) 13 Amp. International Modular Socket

Cat.II Ea. 169.00 10.00

Cat.III Ea. 228.00 10.00

(19) Modular Indicating Call Bell

Cat.III Ea. 312.00 14.00

(20) Modular Buzzer

Cat.II Ea. 114.00 14.00

Cat.III Ea. 134.00 14.00

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

(21) Foot Light as per colour requirement with

concealed box, modular accessories, acrylic glass

cover with suitable LED watt with all accessories

as per following module

(a) Two modules 268.00 45.00

(b) Four modules 445.00 45.00

(c) Six modules 554.00 45.00

(22) 16/20/25 Amp. Modular Starter for Motor / A.C.

Cat.II Ea. 366.00 28.00

Cat.III Ea. 465.00 28.00

(23) USB Charger with output of 5 V DC,2.1 A with 662.00 14.00

inbuilt surge protection. Ea

(24) Batten Holder/Angle Holder with modular 54.00 10.00

frame with metal ring. Ea

1-2-7. Providing & erecting following type of Modular

Type Accessories with necessary connection. As

desired by Engineer In charge

(1) 6 Amp. SP one way switch Ea 21.00 6.00

(2) 16 Amp. SP one way switch Ea 45.00 6.00

(3) 6/16Amp. Universal socket Ea 76.00 6.00

(4) 6 A socket Ea 36.00 6.00

(5) LAN cable connector with ferule Ea 30.00 6.00

1-2-8. Providing D type non rechargeable carbon zinc type 30.00 0.00

Cell 1.5v of desired make suitable as demanded by

engineer in charge evereday,panasonic,nippo make

1-2-9. Providing AA type 1.5 v non rechargeable Cell of

desired make as demanded by engineer in charge

(a)Carbon-zinc evereday,panasonic,nippo make 12.00 0.00

(b)Alkaline -Dura cell make Ea 70.00 0.00

1-2-10 Providing AAA type 1.5 v Cell of desired make as

demanded by engineer in charge

(a)Carbon-zinc evereday,panasonic,nippo make 12.00 0.00

(b)Alkaline -Dura cell make Ea 80.00 0.00

1-2-11 Providing 9v Cell of desired make as demanded by

engineer in charge

(a)Hiwatt/evereday/panasonic Ea 198.00 0.00

(b)Ultra alkaline -Dura cell make Ea 268.00 0.00

Section - 1-3 Conduits & Pipes

1-3-1. For Laying of Pipes on Stone Wall add to the

following item rate per meter

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

1-3-2. Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with necessary

PVC fittings & Junction boxes fixed with adhesive

solution & Clamps with following dia of pipes, in

approved manner as directed

1-3-3. Providing & erecting approved make OVAL

CONDUIT with necessary fittings fixed with

adhesive solution and suitable clamps erected on

wall / ceiling of following size.

1-3-4. Providing & erecting PVC Corrugated Flexible

Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following

1-3-5. Supplying & erecting UPVC Mini trunking (PVC

Casing-n-Capping) having double-locking

arrangement with grooves, trunking of size not

below 12.5 mm in height as per IS with accessories

of PVC/Resin polypropylene not below 1.8 mm

thick duly sealed in joint & erected on wall / ceiling

of following size .

UPVC TRUNKING SYSTEM

1-3-6 Supplying and laying UPVC cable trunking system

comprising unplasticised polyvinyl, chloride rigid

material with ignition free and flame proof

confirming BS with necessary end caps Internal

and external bend, flat bends, coupler, tee etc..All

necessary accessories and measuring of following

(1) 75 mm x 50 mm trunking Mtr. 257.00 18.00

(2) 100 mm x 50 mm trunking Mtr. 396.00 28.00

(3) 50 mm x 50 mm trunking Mtr 169.00 18.00

(4)100 mm x 50 mm trunking with TWIN 1281.00 28.00

compartment With clip in divider

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

1-3-7. Supply & installation of surface mounted U PVC

snap-on adaptable trunking raceways, fabricated

out of U-PVC to Off-White or approved shade as

per IS 733 of thickness 2.0mm for the base and

sides with all accessories like removable covers,

joints ,height spacer,angles complete with

necessary bends, suitable sized junction boxes and

tees etc, Complete.

(a)Size: 50x80mm PVC Raceways for Power & 1024.00 28.00

Data with 2 compartments above specifications. MTr

(b)Size: 50x130 mm PVC Raceways for Power & 1789.00 28.00

Data with 2 compartments above specifications. Mtr

1-3-8. Providing & Erecting eight module pop up floor 1457.00 72.00

box/flushed with table surface Conform to IEC

required items as demanded by engineer in charge

with complete finishing .cat-III

1-3-9. Supply & installation of modular type accessories

for U PVC snap-on adaptable trunking/Pop up Box

with required items erected with necessary

connection. As desired by Engineer In charge

i) 6 A SP 1 Way Switch cat-III Ea. 194.00 10.00

ii) 16A SP 1 Way Switch cat-III Ea. 341.00 10.00

iii) Bell Push 6 A SP 1 Way cat-III Ea. 278.00 10.00

iv) 6A universal socket shuttered cat-III Ea. 337.00 10.00

iv) 6/16 A universal socket shuttered cat-III Ea. 448.00 10.00

v) RJ-11 Telephone socket cat-III Ea. 234.00 10.00

vi) Cat-6 LAN Socket cat-III Ea. 551.00 10.00

1-3-10 Supplying under floor pregalvanised corrosion

proof rectangular sheet steel cable trunking of

mm thick having with stand point load up to

Ton & free from seepage of concrete of screed

water with all accessories,Junction Box,Joints as

required and demanded by engineer-incharge and

laying/erecting as per OEM guidelines and as per

instruction of engineer incharge having following

size of dimensions and No of compartments (W x D

[1] 50mm x 25mm x 1.6 mm with One 277.00 18.00

[2] 75mm x 25mm x 1.6 mm with One 356.00 18.00

[3] 100mm x 25mm x 1.6 mm with one 426.00 28.00

[4] 225mm x 25mm x 1.6 mm with Three 929.00 36.00

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

[5] 250mm x 25mm x 1.6 mm with Three 999.00 36.00

[6] 300mm x 25mm x 1.6 mm with Three 1167.00 45.00

[7] 50mm x 38mm x 1.6 mm with One 356.00 18.00

[8] 75mm x 38mm x 1.6 mm with one 436.00 18.00

[9] 100mm x 38mm x 1.6 mm with One 515.00 28.00

[10] 150mm x 38mm x 1.6mm with Three 722.00 36.00

[11] 225mm x 38mm x 1.6mm with Three 1048.00 36.00

[12] 250mm x 38mm x 1.6mm with Three 1147.00 36.00

[13] 300mm x 38mm x 1.6 mm with Three 1284.00 45.00

1-3-11 Providing & erecting 16 gauge HGS conduit pipe

(as per IS) painted black surface/concealed of

following size complete to be erected on/in wall or

ceiling with erected with necessary saddles,

screws, bends, junction boxes etc. with following

(Nominal Bore) dia of pipes, in approved manner as

Section 1-4 Mains & Wires

1-4-1. Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

(A) (A) With medium class Rigid PVC pipe and

(a) 2 wire 1.5 sq. mm Mtr. 56.00 6.00

(b) 2 wire 2.5 sq. mm Mtr. 76.00 6.00

(c) 3 wire 1.5 sq. mm Mtr. 76.00 6.00

(d) 3 wire 2.5 sq. mm Mtr. 95.00 6.00

(e) 4 wire 1.5 sq. mm Mtr. 84.00 6.00

(f) 4 wire 2.5 sq. mm Mtr. 119.00 6.00

(g) 6 wire 2.5 sq. mm Mtr. 164.00 6.00

(B) (B) With 16 swg HGS metal conduit pipe and

accessories painted black.

(a) 2 wire 1.5 sq. mm Mtr. 105.00 23.00

(b) 2 wire 2.5 sq. mm Mtr. 129.00 23.00

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

(c) 3 wire 1.5 sq. mm Mtr. 124.00 23.00

(d) 3 wire 2.5 sq. mm Mtr. 149.00 23.00

(e) 4 wire 1.5 sq. mm Mtr. 129.00 28.00

(f) 4 wire 2.5 sq. mm Mtr. 164.00 28.00

(g) 6 wire 2.5 sq. mm Mtr. 218.00 28.00

(C) (C) With oval conduit /PVC casing capping double

(a) 2 wire 1.5 sq. mm Mtr. 50.00 6.00

(b) 2 wire 2.5 sq. mm Mtr. 76.00 6.00

(c) 3 wire 1.5 sq. mm Mtr. 70.00 6.00

(d) 3 wire 2.5 sq. mm Mtr. 89.00 6.00

(e) 4 wire 1.5 sq. mm Mtr. 80.00 6.00

(f) 4 wire 2.5 sq. mm Mtr. 113.00 6.00

(g) 6 wire 2.5 sq. mm Mtr. 177.00 6.00

(D) (D) Partial PVC pipe and drops in oval conduit /

PVC casing capping

(a) 2 wire 1.5 sq. mm Mtr. 50.00 6.00

(b) 2 wire 2.5 sq. mm Mtr. 76.00 6.00

(c) 3 wire 1.5 sq. mm Mtr. 70.00 6.00

(d) 3 wire 2.5 sq. mm Mtr. 89.00 6.00

(e) 4 wire 1.5 sq. mm Mtr. 80.00 6.00

(f) 4 wire 2.5 sq. mm Mtr. 119.00 6.00

(g) 6 wire 2.5 sq. mm Mtr. 158.00 6.00

(E) (E) in existing pipe

(a) 2 wire 1.5 sq. mm Mtr. 42.00 4.00

(b) 2 wire 2.5 sq. mm Mtr. 58.00 4.00

(c) 3 wire 1.5 sq. mm Mtr. 56.00 6.00

(d) 3 wire 2.5 sq. mm Mtr. 85.00 6.00

(e) 4 wire 1.5 sq. mm Mtr. 75.00 6.00

(f) 4 wire 2.5 sq. mm Mtr. 108.00 6.00

(g) 6 wire 2.5 sq. mm Mtr. 148.00 6.00

1-4-2. providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size

(A) (A) with medium class Rigid PVC pipe and

(a) 2 wire 4 sq. mm Mtr. 105.00 6.00

(b) 2 wire 6 sq. mm Mtr. 140.00 6.00

(use earth wire of 4 sq.mm )

(d) 3 wire 4 sq. mm Mtr. 134.00 7.00

(e) 3 wire 6 sq. mm Mtr. 192.00 7.00

(use earth wire of 4 sq.mm )

(g) 4 wire 4 sq. mm Mtr. 169.00 10.00

(h) 4 wire 6 sq. mm Mtr. 248.00 10.00

(use earth wire of 4 sq.mm )

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

(B) (B) with 16 swg HGS metal conduit pipe and

accessories painted black.

(a) 2 wire 4 sq. mm Mtr. 149.00 23.00

(b) 2 wire 6 sq. mm Mtr. 188.00 23.00

(use earth wire of 4 sq.mm )

(d) 3 wire 4 sq. mm Mtr. 179.00 23.00

(e) 3 wire 6 sq. mm Mtr. 243.00 23.00

(use earth wire of 4 sq.mm )

(g) 4 wire 4 sq. mm Mtr. 204.00 28.00

(h) 4 wire 6 sq. mm Mtr. 297.00 28.00

(use earth wire of 4 sq.mm )

(C) (C) with oval conduit /PVC casing capping double

(a) 2 wire 4 sq. mm Mtr. 89.00 6.00

(b) 2 wire 6 sq. mm Mtr. 129.00 6.00

(use earth wire of 4 sq.mm )

(d) 3 wire 4 sq. mm Mtr. 124.00 7.00

(e) 3 wire 6 sq. mm Mtr. 187.00 7.00

(use earth wire of 4 sq.mm )

(g) 4 wire 4 sq. mm Mtr. 159.00 10.00

(h) 4 wire 6 sq. mm Mtr. 243.00 10.00

(use earth wire of 4 sq.mm )

(D) (D) partial PVC pipe and drops in oval conduit /

PVC casing capping

(a) 2 wire 4 sq. mm Mtr. 100.00 6.00

(b) 2 wire 6 sq. mm Mtr. 134.00 6.00

(use earth wire of 4 sq.mm )

(d) 3 wire 4 sq. mm Mtr. 132.00 7.00

(e) 3 wire 6 sq. mm Mtr. 202.00 7.00

(use earth wire of 4 sq.mm )

(g) 4 wire 4 sq. mm Mtr. 164.00 10.00

(h) 4 wire 6 sq. mm Mtr. 253.00 10.00

(use earth wire of 4 sq.mm )

(E) (E) in existing pipe

(a) 2 wire 4 sq. mm Mtr. 80.00 6.00

(b) 2 wire 6 sq. mm Mtr. 114.00 6.00

(use earth wire of 4 sq.mm )

(d) 3 wire 4 sq. mm Mtr. 112.00 7.00

(e) 3 wire 6 sq. mm Mtr. 172.00 7.00

(use earth wire of 4 sq.mm )

(g) 4 wire 4 sq. mm Mtr. 144.00 10.00

(h) 4 wire 6 sq. mm Mtr. 228.00 10.00

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

(use earth wire of 4 sq.mm )

1-4-3 providing and erecting Mains with ISI marked

electrolyte stranded copper conductor, Non PVC

Zero Halogen free fire retardant insulated copper

conductor, insulated wire (HRFR) conforms to IS-

694, erected in existing pipe with 1.5sq. mm copper

conductor of same specifications for earth

continuity of following size.

[a] 2wire 0.75 sq.mm (w/o ECC) Mtr 18.00 4.00

[b] 2 wire 1.0 sq.mm (w/o ECC) Mtr 24.00 4.00

[c] 2 wire 1.5 sq.mm Mtr 45.00 6.00

[d] 2 wire 2.5 sq.mm Mtr 65.00 6.00

[e] 2 wire 4.0 sq.mm Mtr 95.00 6.00

[f] 2 wire 6.0 sq.mm Mtr 129.00 10.00

[g] 2 wire 10.0 sq.mm Mtr 209.00 10.00

[h] 3 wire 1.0 sq.mm Mtr 45.00 6.00

[i] 3 wire 1.5 sq.mm Mtr 60.00 6.00

[j] 3 wire 2.5 sq.mm Mtr 95.00 6.00

[k] 3 wire 4.0 sq.mm Mtr 129.00 10.00

[l] 4 wire 1.0 sq.mm Mtr 45.00 6.00

[m] 4 wire 1.5 sq.mm Mtr 76.00 6.00

[n] 4 wire 2.5 sq.mm Mtr 120.00 6.00

[o] 4 wire 4.0 sq.mm Mtr 179.00 10.00

1-4-4 providing and erecting Mains with ISI marked,

1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing

pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and

bolts if required.

(a) One wire 1.00 sq. mm Mtr. 10.00 2.00

(b) One wire 1.50 sq. mm Mtr. 15.00 2.00

(c) One wire 2.50 sq. mm Mtr. 24.00 3.00

(d) One wire 4.00 sq. mm Mtr. 34.00 3.00

(e) One wire 6.00 sq. mm Mtr. 53.00 3.00

(f) One wire 10.00 sq. mm Mtr. 88.00 3.00

(g) One wire 16.00 sq. mm Mtr. 137.00 4.00

(h) One wire 25.00 sq. mm Mtr. 230.00 4.00

(i) One wire 35.00 sq. mm Mtr. 294.00 4.00

(j) One wire 50.00 sq. mm Mtr. 460.00 6.00

(k) One wire 70.00 sq. mm Mtr. 657.00 6.00

(l) One wire 95.00 sq. mm Mtr. 898.00 12.00

(m) One wire 120.00 sq. mm Mtr. 1155.00 12.00

(n) One wire 150.00 sq. mm Mtr. 1433.00 14.00

1-4-5 Supplying and erecting Flexible PVC insulated multi

strand multi core 1.1 kv grade ISI marked copper

wires of following size to be erected as directed.

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

(a) 0.75 Sq.mm twin twisted Mtr. 13.00 2.00

(b) 1.00 Sq.mm twin twisted Mtr. 14.00 2.00

(c) 1.00 Sq.mm 2 core round/ flat PVC sheathed 20.00 2.00

(d) 1.50 Sq.mm 2 core round PVC sheathed Mtr. 29.00 2.00

(e) 1.50 Sq.mm 3 core round PVC sheathed Mtr. 44.00 2.00

(f) 1.50 Sq.mm 4 core round PVC sheathed Mtr. 65.00 2.00

(g) 2.50 Sq.mm 2 core round PVC sheathed Mtr. 54.00 2.00

(h) 2.50 Sq.mm 3 core round PVC sheathed Mtr. 75.00 2.00

(i) 2.50 Sq.mm 4 core round PVC sheathed Mtr. 104.00 2.00

(j) 4.00 Sq.mm 3 core round PVC sheathed Mtr. 123.00 3.00

(k) 4.00Sq.mm 4 core round PVC sheathed Mtr. 172.00 3.00

1-4-6 Providing & Erecting approved make following size

of TV Co-axial flexible cable comprising inner

conductor of solid bare copper insulated with Foam

PE & Secondary conductor made of poly -

Aluminium film bonded Al. Braids @ suitable

coverage overall sheathed with black PVC

(c) RG - 6 CCS Mtr. 18.00 3.00

(d) RG - 11 CCS Mtr 34.00 3.00

1-4-7 Supplying & erecting approved make Telephone

Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC

tape & sheathed with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring & confirming to

C-DOT erected in existing pipe. of following size of

conductors & nos.of pairs. With necessary

[A] Conductor Size 0.5 mm

(1) One Pair Mtr. 10.00 4.00

(2) Two Pairs Mtr. 16.00 4.00

(3) Three Pairs Mtr. 22.00 4.00

(4) Five Pairs Mtr. 36.00 4.00

(5) Ten Pairs Mtr. 59.00 6.00

(6) Twenty Pairs Mtr. 120.00 6.00

(b) Armoured [Jelly Filled]

(1) Ten Pairs Mtr. 114.00 10.00

(2) Twenty Pairs Mtr. 184.00 14.00

(3) Fifty Pairs Mtr. 440.00 23.00

(4) One Hundred Pairs Mtr. 831.00 36.00

1-4-8 Supplying & erecting approved make LAN cable of

following size in existing pipe as per direction

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

[E] CAT - 6 shielded Mtr 88.00 6.00

1-4-9 Providing & erecting main Distribution (MDF) indoor

type, back mounted frame as per DoT standard

approved with krone strips

(a) Suitable for 10 pair Ea. 940.00 45.00

(b) Suitable for 20 pair Ea. 1185.00 170.00

(c) Suitable for 50 pair Ea. 1433.00 297.00

(d) Suitable for 100 pair Ea. 2964.00 445.00

(e) Suitable for 200 pair Ea. 5729.00 623.00

1-4-10 Providing & Erecting 6 core fibre optic SM 9/125um 50.00 10.00

double sheath, CSTA, Unitube, Outdoor cable (per Rmtr.

Section 1-5 Concealed Boxes & Laminated Sheets

1-5-1. Supplying & erecting M.S. Box having 16 Gauge

painted with red oxide or Heavy duty PVC box

erected flushed on wall or concealed in wall with

necessary plastering & finishing as directed of

following size.

1-5-2. Providing & Erecting 3mm thick Polycarbonate (PC) 2.00 1.00

sheet with grooving as directed

1-5-3. Providing & Erecting 3mm thick acrylic Sheet with 2.00 1.00

grooving as directed

Section 1-6 Wiring Accessories

1-6-1. Providing & Erecting following Shockproof tissino

type accessories erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/ Metal/Wooden Box.

erected on wall/ ceiling.

(1) One no Single pole 6 A Switch / Bell push Ea. 25.00 6.00

(2) One no 3/5 pin 6 A Socket Ea. 25.00 6.00

(3) One no Single pole 16 A Switch Ea. 41.00 6.00

(4) One no 6/16 A Universal Socket Ea. 41.00 6.00

(5) One no Single pole 16 A Switch & One no 6/16 80.00 14.00

A Universal Socket combined Ea.

(6) One no Single pole 16 A Switch & One no 110.00 14.00

6A/16A Universal Socket combined with indicator Ea.

(7) Bakelite ceiling, rose Ea. 12.00 6.00

(8) Bakelite lamp holder Ea. 16.00 6.00

(9) Telephone Pin, Socket with suitable top Ea. 36.00 6.00

(10) Jack type tissino Telephone outlet Ea. 36.00 6.00

(11) Tissino type Neon ‘Indicator Lamp’ Ea. 16.00 6.00

(12) Tissino type TV antenna socket Ea. 25.00 6.00

(13) Tissino type 10A/16A Kitkat fuse Ea. 25.00 6.00

(14) Electronic Hum free EME Socket Type Steps 205.00 12.00

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

1-6-2 Providing & erecting Switch board for Computer or

(A) electric apparatus consisting of following items in

single board erected on PVC / Metal/Wooden

board concealed/open with 3 mm thick PC

(Polycarbonate) / Acrylic sheet erected as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Tissino Type Accessories Ea. 297.00 32.00

1-6-2 Providing & erecting Switch board for Computer or

(B) electric apparatus consisting of following modular

type accessories mounted with PVC / Metallic

concealed/open box with single mounting base

frame covered with textured/metallic /white front

plate,modules erected with necessary connections

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

Cat. III Ea. 1068.00 54.00

1-6-3. Bakelite adopter for Holder to be erected. Ea. 6.00 3.00

1-6-4. Starter for 20 watts / 40 watts fluorescent tube. Ea. 6.00 0.00

1-6-5. Hanging bed switch / Bell push 5A erected on 13.00 4.00

existing flexible wire.

1-6-6. 5A, 10 way bakelite connector duly erected on 23.00 4.00

existing board.

1-6-7. 15A. 10 way bakelite connector duly erected on 41.00 6.00

existing board.

1-6-8. Providing & erecting ISI marked 3 pin plug top.

1-6-9. Supplying & erecting Approved make call bell 129.00 18.00

indicator with buzzing sound and Red light

indicating lamp with Red light button to attend the Ea.

call suitable for 240 v 50 c/s supply to be erected.

1-6-10. Call bell / Buzzer,250 volts, complete erected. Ea. 25.00 6.00

1-6-11. Call bell gong type suitable for 230 volts, 50 c/s. 36.00 6.00

AC supply complete Erected

1-6-12. Decorative call bell Ting-tong box type 250 volts 65.00 6.00

complete erected

1-6-13. Supplying & erecting Electronic Type Cordless Call 248.00 0.00

Bell erected on PVC/Metal board having portable

bell push working on D.C. & bell on 230V A.C.

supply with cells / battery

1-6-14 Providing Automatic staircase unit and Light Control 643.00 45.00

switch with Photocell & solid state circuits with Ea.

loading capacity up to 1000 Watt

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

1-6-15 Supplying electrical insulation L.T. Tape role with 16.00 0.00

ISI marked having nominal width 1.8 cms nominal

length 9.0 mtr nominal thickness 0.125 mm and

having self adhesive PVC

1-6-16 Providing & erecting insulated socket 3P+N+E with 1550.00 140.00

Plug16A rating which is comprised of Four pole Ea.

MCB slot and insulated socket IP40 cat-III

1-6-17 Providing & erecting insulated socket 3P+N+E with 1989.00 180.00

Plug 32A rating which is comprised of Four pole

MCB slot and insulated socket IP40 cat-III

Section 1-7 TOOLS & TACKLES

1-7-1 Supply of Fiberglass Step (A Type) Ladder - 4 FT 10571.00 0.00

having following specifications.

It should have nonconductive Structural moulded

top, with Slots to keep tools close at hand, inside

Spreader Braces, Aluminium Feet with thick rubber

tread, nonconductive Full channel Fibreglass and

two pairs of gusset support at the bottom step. All Ea.

gussets are heavy duty steel.

Capacity : 300 lbs.

Step Size : 3” Width : 19” “Approx. Spread :

Wt. :8 Kg Approx. Cube : 4.05’

1-7-2 Supply of Fibreglass Step (A Type) Ladder - 6 FT 13802.00 0.00

having following specifications :

It should have nonconductive Structural moulded

top, with Slots to keep tools close at hand, inside

Spreader Braces, Aluminium Feet with thick rubber

tread, nonconductive Full channel Fibreglass and

two pairs of gusset support at the bottom step. All Ea.

gussets are heavy duty steel.

Capacity : 300 lbs. Step Size : 3” Width : 23”

Spread : 41” Approx.

Wt. : 11 Kg Approx. Cube : 6.2’

1-7-3 Supply of Fibreglass Step (A Type)Ladder-8 FT 18011.00 0.00

having following specifications :

It should have nonconductive Structural moulded

top, with Slots to keep tools close at hand, inside

Spreader Braces, Aluminium Feet with thick rubber

tread, nonconductive Full channel Fibreglass and

two pairs of gusset support at the bottom step. All

gussets are heavy duty steel.

Capacity : 300 lbs. Step Size : 3”

Width : 26” Approx. Spread : 54” Approx. Wt. :

Kg Approx. Cube :

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

1-7-4 Supply of Fibreglass Step (A Type) Ladder - 10 FT 22121.00 0.00

having following specifications :

It should have nonconductive Structural moulded

top, with Slots to keep tools close at hand, inside

Spreader Braces, Aluminium Feet with thick rubber

tread, nonconductive Full channel Fibreglass, two

pairs of gusset support at the bottom step and All

gussets are heavy duty steel.

Capacity : 300 lbs. Step Size : 3” Width : 29”

Approx. Spread : 66”Approx. Wt. : 19 Kg Approx.

1-7-5 Supply of Fibreglass Step Trestle (A Type) Ladder - 16151.00 0.00

6 FT having following specifications :

It should have heavy gauge steel hinges suitable for

industrial application ,inside Spreader Braces,

Aluminium Feet with thick rubber tread,

nonconductive Full channel Fiberglass,two pairs of

gusset support at the bottom step and All gussets Ea.

are heavy duty steel. It should have steps on both

the sides for climbing. Capacity : 300 lbs." Step

Width : 3” Bottom Width:23” Approx.

Spread : 52”Approx.Wt.:13 Kg Approx. Cube :

1-7-6 Supply of Fibreglass Step Trestle (A Type) Ladder - 21534.00 0.00

8 FT having following specifications :

It should have heavy gauge steel hinges suitable for

industrial application ,inside Spreader Braces,

Aluminium Feet with thick rubber tread,

nonconductive Full channel Fibreglass, two pairs of

gusset support at the bottom step and All gussets Ea.

are heavy duty steel. It should have steps on both

the sides for climbing. Capacity:300 lbs. Step

Bottom Width : 26” Approx.

Spread : 67” “Approx. Wt. : 20 Kg Approx.

1-7-7 Supply of Fibreglass Step Trestle (A Type) Ladder - 25450.00 0.00

10 FT having following specifications :

It should have heavy gauge steel hinges suitable for

industrial application ,inside Spreader Braces

,Aluminium Feet with thick rubber tread,

nonconductive Full channel Fibreglass ,two pairs of

gusset support at the bottom step and All

gussets are heavy duty steel. It should have steps

on both the sides for climbing. Capacity : 300 lbs."

Step Width : 4” Bottom Width : 29” Approx.

Spread : 83” Approx. Wt. : 27 Kg Approx. Cube :

SOR 2023-2024 Chapter 1 Page

Cost of Cost of

Item No Description Unit Total

Materials Labour

1-7-8 Supply of Fibreglass Platform Step (A Type) Ladder 19186.00 0.00

- 6 FT having following specifications :

It should have large fully serrated

platform 15” wide 20” deep which locks ladder

,Aluminium feet with thick rubber tread, top rail

guard to serve as a railing, two pairs of gusset Ea.

support at the bottom step and All gussets are

heavy duty steel. Capacity : 300 lbs. Step Width :

3’ Approx. spread : 50” Width : 26.5”

Approx. Wt. : 16 Kg Approx. Cube : 8.15’"

1-7-9 Supply of Fibreglass Platform Step (A Type) Ladder 23492.00 0.00

- 8 FT having following specifications :

It should have large fully serrated

platform 15” wide 20” deep which locks ladder,

Aluminium feet with thick rubber tread, top rail

guard to serve as a railing, two pairs of gusset Ea.

support at the bottom step and All gussets are

heavy duty steel. Capacity : 300 lbs. Step Width :

3’ Approx. spread : 62” Width : 29.5”

Approx. Wt. : 22 Kg Approx. Cube :

1-7-10 Supply of Fibreglass Platform Step (A Type) Ladder 27701.00 0.00

- 10 FT having following specifications :

It should have large fully serrated

platform 15” wide 20” deep which locks ladder

Aluminium feet with thick rubber tread, top rail

guard to serve as a railing, two pairs of gusset Ea.

support at the bottom step and All gussets are

heavy duty steel. Capacity : 300 lbs. Step Width :

4’ Approx. spread : 75” Width : 32”

Approx. Wt. : 29 Kg Approx. Cube :

1-7-11. Supply of Fibreglass Platform Step (A Type) Ladder 31323.00 0.00

- 15 FT having following specifications :

It should have large fully serrated

platform 15” wide 20” deep which locks ladder

Aluminium feet with thick rubber tread, top rail Ea.

guard to serve as a railing, two pairs of gusset

support at the bottom step and All gussets are

heavy duty steel. Capacity : 300 lbs

1-7-12. Supply of Fibreglass Platform Step (A Type) Ladder 35238.00 0.00

- 18 FT having following specifications :

It should have large fully serrated

platform 15” wide 20” deep which locks ladder

Aluminium feet with thick rubber tread, top rail

guard to serve as a railing, two pairs of gusset Ea.

support at the bottom step and All gussets are

heavy duty steel. Capacity : 300 lbs.

SOR 2023-2024 Chapter 1 Page

CHAPTER - II Lamps & luminaires

SECTION 2-1 HELOGEN LAMPS

Cost of Cost of

Item No Description Unit Total

Materials Labour

2-1-1 Providing and erecting Halogen Pin type lamp

Cat.II Ea. 43.00 5.00

Cat.III Ea. 68.00 5.00

2-1-2 Supplying and erecting electronic transformer Ea. 136.00 9.00

of 220V / 12V, 50 W suitable for Halogen

2-1-3. Providing and erecting Halogen tube

Watt./1000 Watt.

Cat.II Ea. 94.00 9.00

Cat.III Ea. 128.00 9.00

SECTION 2-2 FLUORESCENT TUBES

2-2-1. Approved make fluorescent tube 60 cms. 18/20

watt erected, if required.

Cat.I Ea. 43.00 0.00

Cat.II Ea. 47.00 0.00

Cat.III Ea. 51.00 0.00

2-2-2. Approved make fluorescent tube 120cms.

18/20 watt erected, if required.

Cat.I Ea. 43.00 0.00

Cat.II Ea. 47.00 0.00

Cat.III Ea. 51.00 0.00

SECTION 2-3 SODIUM VAPOUR LAMP

2-3-1. Approved make High pressure sodium vapour

lamp, Tubular/Elliptical type 70W.

230/240/250V. erected, if required.

Cat.II Ea. 365.00 0.00

Cat.III Ea. 390.00 0.00

2-3-2. Approved make High pressure sodium vapour

lamp, Tubular/Elliptical type 150W,

230/240/250V, erected , if required

Cat.II Ea. 475.00 0.00

Cat.III Ea. 509.00 0.00

2-3-3. Approved make High pressure sodium vapour

lamp, Tubular/Elliptical type 250W,

230/240/250V, erected , if required

Cat.II Ea. 526.00 0.00

Cat.III Ea. 551.00 0.00

2-3-4. Approved make High pressure sodium vapour

lamp, Tubular/Elliptical type 400W,

230/240/250V, erected , if required

Cat.II Ea. 645.00 0.00

Cost of Cost of

Item No Description Unit Total

Materials Labour

Cat.III Ea. 763.00 0.00

SECTION 2-4 COMPACT FLUORESCENT LAMP

2-4-1. Approved make CFL Retrofit 5 / 7 / 9 /11 Watt,

erected if required

Cat.I Ea. 30.00 0.00

Cat.II Ea. 77.00 0.00

Cat.III Ea. 102.00 0.00

2-4-2. Approved make C.F.L. Retrofit 13/15/18 Watt

erected if required

Cat.I Ea. 60.00 0.00

Cat.II Ea. 119.00 0.00

Cat.III Ea. 136.00 0.00

2-4-3. Approved make C.F.L.Retrofit 20 / 23 / 25 /

Watt. erected if required

Cat.I Ea. 94.00 0.00

Cat.II Ea. 140.00 0.00

Cat.III Ea. 187.00 0.00

2-4-4 Approved make C.F.L.Retrofit of following size

erected if required

Cat.II Ea. 255.00 0.00

Cat.III Ea. 297.00 0.00

Cat.II Ea. 382.00 0.00

Cat.III Ea. 467.00 0.00

Cat.II Ea. 467.00 0.00

Cat.III Ea. 509.00 0.00

2-4-5. Approved make CFL. Non-Retrofit 9/11

Watt erected if required

Cat.I Ea. 30.00 0.00

Cat.II Ea. 56.00 0.00

2-4-6. Approved make CFL. Non-Retrofit 13 /15 /

Watt erected if required

Cat.I Ea. 43.00 0.00

Cat.II Ea. 81.00 0.00

Cat.III Ea. 111.00 0.00

2-4-7. Approved make C.F.L.Non-Retrofit 35 /

Watt erected if required

Cat.I Ea. 85.00 0.00

Cat.II Ea. 136.00 0.00

Cat.III Ea. 162.00 0.00

Cost of Cost of

Item No Description Unit Total

Materials Labour

2-4-8 Approved make Spiral Retrofit CFL. for BC /

Screw Type Holder of following size erected if

Cat.II Ea. 162.00 0.00

Cat.III Ea. 212.00 0.00

[b] 35 / 36 Watt

Cat.II Ea. 280.00 0.00

Cat.III Ea. 323.00 0.00

[c] 65/50 Watt.

Cat.II Ea. 509.00 0.00

Cat.III Ea. 636.00 0.00

2-4-9. Approved make CFL. Ballast Having P.F.

above 0.95 (Adopter) 9/11/13/15/18 Watt

erected if required

Cat.I Ea. 51.00 0.00

Cat.II Ea. 89.00 0.00

Cat.III Ea. 132.00 0.00

2-4-10. Approved make CFL. Ballast Having P.F.

above 0.95 for 20 watt up to 86 watt erected if

Cat.II Ea. 382.00 0.00

Cat.III Ea. 467.00 0.00

SECTION 2-5 METAL HALIDE LAMPS

2-5-1. Approved make Elliptical type Metal Halide

lamps erected if required

Cat.II Ea. 721.00 0.00

Cat.III Ea. 806.00 0.00

Cat.II Ea. 763.00 0.00

Cat.III Ea. 933.00 0.00

(iii) 250 Watt.

Cat.II Ea. 933.00 0.00

Cat.III Ea. 1102.00 0.00

Cat.II Ea. 1060.00 0.00

Cat.III Ea. 1272.00 0.00

2-5-2. Approved make Double Ended type Metal

Halide lamps erected if required

Cost of Cost of

Item No Description Unit Total

Materials Labour

Cat.II Ea. 551.00 0.00

Cat.III Ea. 636.00 0.00

Cat.II Ea. 594.00 0.00

Cat.III Ea. 721.00 0.00

(iii) 250 Watt.

Cat.II Ea. 1526.00 0.00

Cat.III Ea. 1653.00 0.00

2-5-3. Approved make Tubular type Metal Halide

lamps erected if required

Cat.II Ea. 721.00 0.00

Cat.III Ea. 806.00 0.00

Cat.II Ea. 763.00 0.00

Cat.III Ea. 933.00 0.00

(iii) 250 Watt.

Cat.II Ea. 933.00 0.00

Cat.III Ea. 1102.00 0.00

Cat.II Ea. 1060.00 0.00

Cat.III Ea. 1272.00 0.00

SECTION 2-6 LAMP FITTINGS

2-6-1. Providing and erecting decorative wall bracket Ea. 1662.00 34.00

fittings complete with LED lamp and rust free

fittings components mounted in chrome finish

housing with holder ,clear/opaque glass

diffuser complete erected with lead wires with

minimum 15 wattage capacity as per instruction

engineer incharge/architect/authority .cat-III

ENERGY SAVING FLUORESCENT TUBE FITTINGS

(With Electronic Ballast)

Cost of Cost of

Item No Description Unit Total

Materials Labour

2-7-1. Supplying and erecting approved make of tube

fitting with One no T-5 tube 24/ 28 W with

Electronic ballast with each tube separately

THD less than 10 & built in adaptors, GI / PVC

housing & mirror optic reflector, suitable to

work on 120V - 300V, A.C. supply with

connector and adapter if required. [Make of

fitting & tube may be differ& fitting shall be

providing with tube]

Cat II Ea. 365.00 26.00

Cat III Ea. 450.00 26.00

2-7-2. Supply of approved make lumilux triphospher T-

5 tube suitable to operate on 120V - 300 V of

Cat I Ea. 94.00 0.00

Cat II Ea. 111.00 0.00

Cat III Ea. 136.00 0.00

(B) 24Watt / 28 watt

Cat II Ea. 128.00 0.00

Cat III Ea. 153.00 0.00

2-7-3 Supplying & erecting energy saving Energy Ea. 467.00 22.00

Efficient E+ (1 - 4 ft) 28 watt retrofit tube fitting

with one no 28watt T-5 tube complete with

E.G.P. wings reflector / clear acrylic guard

cover & tube and electronic inbuilt circuit

ballast of rating 130 to 325 V A.C. The fittings

should be able to fit in any conventional

existing T - 8 tube fittings complete erected in

an approved manner.

2-7-4 Repairing of any brand of T-5 Indoor or

Outdoor type Tube fitting of any nos of T -

tubes by replacing the electrical components

like Resistance, Diode, Capacitor, Transistor,

SCR tube side holder, small transformer and

other any part and put the same in working

condition as original on site / work shop with re-

erection if required. (Rates excluding tube cost)

Cat.II Ea. 789.00 26.00

Cat.III Ea. 924.00 26.00

2-7-5. Outdoor street light fitting side entry with clear

acrylic /plastic / polystyrene cover complete

with starter, polyester choke copper wound

complete erected with 40/36 watt tube holders.

with lead wire and connections.

(a) With 1 tube 40 watt.120 cms

Cost of Cost of

Item No Description Unit Total

Materials Labour

Cat.II Ea. 619.00 34.00

Cat.III Ea. 899.00 34.00

(b) with 2 tube 40 watt.120 cms.

Cat.II Ea. 806.00 34.00

Cat.III Ea. 1178.00 34.00

2-7-6 (A) Providing 45 to 50 cms. 16 SWG conduit Mtr. 128.00 26.00

pipe down rod white painted with ball sockets

and nipple for suspension of fluorescent fitting

complete erected with lead wires.

(B) Extra for every additional 100 mm. long Mtr 8.00 1.00

double down rod.

2-7-7 Providing & erecting 14 SWG galvanized mild Mtr. 23.00 3.00

steel chain with end rings for hanging tube

fitting as directed.

COMPACT FLOURCENT FITTINGS

2-8-1. Providing and erecting approved make C.F.L

out door type street light fitting side entry with

clear acrylic / plastic cover electronic ballast

high circuit P.F. weather proof design (IP 65)

THD less than 10% rust free fitting components

mounted in powder coated CRCA / Al. housing

with lead wire & with Non Retrofit CFL tube

[A] With One CFL tube 9 / 11/ 13 / 18 watt Non

Retrofit with ballast & Holder

Cat.II Ea. 602.00 34.00

Cat.III Ea. 831.00 34.00

[B] With Two CFL tube 9 / 11/ 13 / 18 watt Non

Retrofit with ballast & Holder

Cat.II Ea. 721.00 34.00

Cat.III Ea. 1170.00 34.00

[C] With One CFL tube 36 watt Retrofit or Non

Retrofit with ballast & Holder

Cat.II Ea. 984.00 34.00

Cat.III Ea. 1153.00 34.00

[D] Two CFL tube 36 watt Retrofit or Non

Retrofit with ballast & Holder

Cat.III Ea. 1323.00 34.00

[E] With One CFL retrofit tube 65 watt / 85 watt

Cost of Cost of

Item No Description Unit Total

Materials Labour

Cat.III Ea. 1255.00 34.00

2-8-2. Providing & erecting approved make CFL out

doors type Post top lantern / flying saucer type

fittings cast Aluminium / M.S. Powder Coated

pole mounting type with BS lamp holder &

Clear acrylic diffuser with CFL lamp complete.

[A] With One No. retrofit 11/18 watt CFL

Cat.II Ea. 653.00 34.00

Cat.III Ea. 1229.00 34.00

[B] With One No. retrofit 36 watt CFL

Cat.II Ea. 780.00 34.00

Cat.III Ea. 1323.00 34.00

[C] With One No. retrofit 65 / 85 watt CFL

Cat.II Ea. 950.00 34.00

Cat.III Ea. 1450.00 34.00

2-8-3. Providing and erecting approved make

decorative recess mounting Down Lighter

fittings with anodized Aluminium reflector

suitable for compact flourcent lamp with

copper ballast holder and necessary lead wire.

(A)With One Lamp retrofit 9/11/13 W C.F.L.

Cat.II Ea. 331.00 34.00

Cat.III Ea. 475.00 34.00

(B)With One Lamp non retrofit 15/18/26 W

Cat.II Ea. 458.00 34.00

Cat.III Ea. 611.00 34.00

(C)With Two Lamp non retrofit 15/18/26 W

Cat.II Ea. 687.00 34.00

Cat.III Ea. 806.00 34.00

2-8-4 Providing & erecting Mirror light fitting with One

No. of 9/11/13 CFL Non Retrofit CRCA powder

coated fitting with necessary ballast and

accessories erected with necessary lead wire.

Cat.II Ea. 212.00 34.00

Cat.III Ea. 297.00 34.00

Cost of Cost of

Item No Description Unit Total

Materials Labour

2-8-5 Supply & fixing decorative Hanging light with

glass having cylindrical or square shape having

length not less than 10" & width not less 3.5"

with holder, lead wire as per required length but

not more than 1mm & base plate for fixing the

fitting with ceiling.[a] suitable for led lamp

Cat-III Ea. 1678.00 102.00

SECTION 2-9 SODIUM VAPOUR LAMP FITTINGS

2-9-1. Providing and erecting Approved make street

light luminaire with one no suitable for- HPSV /

MH lamp complete with control gear and

accessories , Single piece Deep drawn

Aluminium housing with two compartments duly

stove enameled painted side reflector

protective acrylic cover, synthetic felt gasket,

necessary hardware. The fitting should be

suitable for side entry having suitable socket

bore for clamping complete erected.

(A) With 70 watt SVL. /Metal Halide lamp

Cat.III Ea. 2856.00 85.00

(B) With 150 watt SVL. /Metal Halide lamp

Cat.III Ea. 4611.00 85.00

(C) With 250 watt SVL. /Metal Halide lamp

Cat.III Ea. 5763.00 128.00

(D) With 400 watt SVL. /Metal Halide lamp

Cat.III Ea. 4958.00 128.00

2-9-2 Providing and erecting Approved make street

light luminaire with one no suitable for- HPSV /

MH lamp complete with control gear and

accessories , Single piece Die cast Aluminium

housing with two compartments duly stove

enameled painted side reflector protective

Glass cover, synthetic felt gasket, necessary

hardware. The fitting should be suitable for

side entry having suitable socket bore for

clamping complete erected.

(A) With 70 watt SVL. /Metal Halide lamp

Cost of Cost of

Item No Description Unit Total

Materials Labour

Cat.III Ea. 3772.00 85.00

(B) With 150 watt SVL. /Metal Halide lamp

Cat.III Ea. 5890.00 128.00

(C) With 250 watt SVL. /Metal Halide lamp

Cat.III Ea. 6653.00 128.00

(D) With 400 watt SVL. /Metal Halide lamp

Cat.III Ea. 7416.00 212.00

2-9-3. Supplying and erecting approved make,

watertight, integral flying saucer type post top

lantern , suitable for 70 Watt. HPSV lamp, with

ignitor, lamp holder, canopy and other

necessary accessories.

Cat.III Ea. 2212.00 34.00

2-9-4. Supplying and erecting, industrial low bay

mirror optic luminaires made from CRCA sheet

steel with aluminium reflector & transparent

acrylic cover for indoor installation with Copper

ballast, igniter, capacitor, Holder, integral type

with one no. 70 watt SON lamp/metal halide

Cat.III Ea. 2043.00 85.00

2-9-5. Supplying and erecting industrial high bay

luminaire , installation with ballast, ignitor,

holder, integral type.

(A) With 150 watt SON lamp/metal hails lamp

Cat.III Ea. 3746.00 128.00

(B) With 250 watt SON lamp/metal halide lamp

Cat.III Ea. 4221.00 128.00

SECTION 2-10 HALOGEN TUBE FITTING

2-10-1. Providing and erecting indoor type halogen

fitting made from M.S. sheet with Aluminium

reflector and holder with halogen tube of

following size.

(A) With 500 watt Halogen Tube

Cost of Cost of

Item No Description Unit Total

Materials Labour

Cat.II Ea. 424.00 34.00

Cat.III Ea. 577.00 34.00

(B) With 1000 watt Halogen Tube

Cat.II Ea. 645.00 34.00

Cat.III Ea. 780.00 34.00

2-10-2. Providing and erecting out door type halogen

fitting made from cast alloys with electro-

chemically polished Aluminium reflector

complete with tuffend glass, silicon gasket with

Halogen tube of following size

(A) With 500 watt Halogen Tube

Cat.II Ea. 602.00 34.00

Cat.III Ea. 772.00 34.00

(B) With 1000 watt Halogen Tube

Cat.III Ea. 1424.00 34.00

SECTION 2-11 : FLOOD LIGHTS

,2-11-1 Providing and erecting, heavy duty flood light

integral luminaire comprises die cast aluminium

body with heat resistant toughened front

glass, silicon rubber gasket,anodised reflector

hot deep powder coated cradle clamp with

suitable size of necessary built in control gear

complete with lamp.

(a) with one no. 70 watt HPSV / Metal halide

Cat.III Ea. 2916.00 51.00

(b) With one no. 150 watt HPSV / Metal halide

Cat.III Ea. 3255.00 51.00

(c) With one no. 250 watt HPSV / Metal halide

Cat.III Ea. 4611.00 51.00

(d) With one no. 400 watt HPSV / Metal halide

Cat.III Ea. 5670.00 51.00

Cost of Cost of

Item No Description Unit Total

Materials Labour

2-11-2 Providing & erecting heavy duty flood light

nonintegral luminaires comprised die cast

aluminium powder coated body with heat

resistant toughned front glass, silicon rubber

gasket anodised reflector, hot deep powder

coated cradle clamp with external control Gear

box having lamp holder & terminal blocks

complete with lamp.

[A] With 2 Nos 250 watt tubular HID HPSV /

Cat-lll Ea 7882.00 212.00

[A] With 2 Nos 400 watt tubular HID HPSV /

Cat-lll Ea 9365.00 212.00

2-11-3 Diacast aluminum HID control gear box for

[a]2 x 250 watt with ballast capacitor ignitor

fuse cutout pre wired with terminal block

Cat-ll Ea 2882.00 85.00

Cat-lll Ea 3517.00 85.00

[b] With 2 Nos 400 watt tubular HID HPSV /

Cat-ll Ea 3645.00 85.00

Cat-lll Ea 3814.00 85.00

SECTION 2-12 OTHER MISCELANIOUS FITTINGS

2-12-1. Supplying P.L.Table lamp having sleek flexible

versatile type with powder coated reflector and

base cover with ABS moulded components and

mirror optics reflector having integral ballast

P.L. Holder fitted with P.L. tube 1 no. 9/11 W

cord wire with plug.

Cat-ll Ea. 229.00 0.00

Cat-lll Ea. 373.00 0.00

2-12-2. Supplying decorative table lamp with LED

lamps of suitable nos equivalent of 11 W light

with flexible copper wire cord with plug top.

Cat.II Ea. 509.00 0.00

Cat.III Ea. 678.00 0.00

2-12-3. Supplying & Fixing Jali cover suitable for T-5 / Ea. 128.00 0.00

T-8 CFL tube indoor / outdoor fitting complete

with necessary material. Jali cover shall be

made from G.I. wire & end side plates of G.I.

sheet 20 gauge with 13 con high safe suitable

SECTION 2-13 ACCESSORIES

Cost of Cost of

Item No Description Unit Total

Materials Labour

2-13-1. Conveyance Charges for departmentally Ea.

supplied Fluorescent Fittings, Street Light and

Flood Light Fittings (from Divisional Store to

2-13.-2 Shock proof hand lamp with wire guard and 3 Ea. 51.00 0.00

mtr of 3 core round flexible wire of suitable size

and 3 pin plug top and heavy duty pendant

2-13-3. supplying and erecting CFL ballast suitable for

9/11/13 watt tube

Cat-ll Ea. 89.00 6.00

Cat-llI Ea. 114.00 6.00

2-13-4. supplying and erecting C F L Ballast

Cat-ll Ea. 114.00 6.00

Cat-llI Ea. 139.00 6.00

2-13-5. Supplying and erecting approved make, heavy

duty polyester filled ballast suitable for 8OWatt.

Cat-ll Ea. 200.00 13.00

Cat-llI Ea. 242.00 13.00

2-13-6. Supplying and erecting approved make, heavy

duty polyester filled ballast suitable for

Watt. HPMV lamp.

Cat-ll Ea. 250.00 13.00

Cat-llI Ea. 369.00 13.00

2-13-7. Supplying and erecting approved make, heavy

duty polyester filled ballast suitable for

Watt. HPMV lamp.

Cat-ll Ea. 348.00 26.00

Cat-llI Ea. 602.00 26.00

2-13-8. Supplying and erecting approved make, heavy

duty polyester filled ballast suitable for

Watt. HPMV lamp.

Cat-ll Ea. 517.00 34.00

Cat-llI Ea. 933.00 34.00

2-13-9. Supplying and erecting approved make, heavy

duty polyester filled ballast suitable for HPSV/

Metal Halide lamp.

Cat-ll Ea 297.00 26.00

Cat-llI Ea 467.00 26.00

Cat-ll Ea 678.00 26.00

Cat-llI Ea 890.00 26.00

Cat-ll Ea 916.00 26.00

Cat-llI Ea 1246.00 26.00

Cost of Cost of

Item No Description Unit Total

Materials Labour

Cat-ll Ea 1526.00 43.00

Cat-llI Ea 1780.00 43.00

2-13-10 Supplying and erecting approved make ignitor Ea. 136.00 26.00

suitable for HPSV/ Metal Halide fittings, 7OW /

2-13-11 Supplying & erecting control gear box, weather

proof made of Cast aluminium with heavy duty

copper polyester choke, condenser, MCB,

connector block & earthing terminal complete

erected with necessary screws, nuts & bolts

clamps suitable for

(A) For HPSV/MH Lamp with ignitor For One

Cat-ll Ea 589.00 47.00

Cat-llI Ea 759.00 47.00

Cat-ll Ea 759.00 47.00

Cat-llI Ea 886.00 47.00

Cat-ll Ea 971.00 47.00

Cat-llI Ea 1183.00 47.00

Cat-ll Ea 1352.00 47.00

Cat-llI Ea 1522.00 47.00

2-13-12. Supplying & erecting approved make HFHC

Electronic ballast having operation voltage

range 120V to 300V at 0.95 power factor for (a)

One No. 20/40 watt tube light

Cat.II Ea. 234.00 13.00

Cat.III Ea. 293.00 13.00

SECTION 2-14 SOLAR STREET LIGHTS

Cost of Cost of

Item No Description Unit Total

Materials Labour

2-14-1 Supplying and erecting MNES certified SOLAR

STREET LIGHT fitting made from M.S. Body

powder coated / painted with corrosion

resistant paint with gasket & transparent cover

with following CFL non retro lamp with choke,

holder & accessories. Fitting shall be mounted

on 75/80 mm B class G.I. pipe pole up to

mtr load complete erected with C.C.

Foundation duly painted with two coats of red

oxide and corrosive resistant paint. Complete

with tubular battery, inverter, charge controller

with photo sensor switch & necessary wiring

complete erected connected & commissioned

in approved manner.

[A] 1 x 11 w CFL PV Module : 74 W Battery Ea. 20128.00 212.00

Capacity : 12V, 75 AH

[B] 2 x 11 W CFL (Single luminaire with 2 CFL) Ea. 27755.00 212.00

PV Module:120 W Battery Capacity 12V,

[C] 2 x 11 W CFL (Double Luminaire with One Ea. 28602.00 212.00

CFL each), PV Module : 120W Battery

Capacity : 12V, 100 AH

2-14-2 Supplying & erecting Solar Home light system

with structure as per MNES specification

consisting of following non retrofit CFL fitting

complete with following CFL lamps & battery

capacity dully connected with built in inverter &

commissioned as per directed with necessary

wiring & fittings.

(A) One No CFL 11 watt non retrofit ceiling / Ea. 5594.00 255.00

wall mounting features with battery capacity

(B) Two No CFL 11 watt non retrofit ceiling / Ea. 10170.00 255.00

wall mounting features with battery capacity

(C) Three No CFL 11 watt non retrofit ceiling / Ea. 10424.00 255.00

wall mounting features with battery capacity

SECTION 2-15 LED LUMINARIES

Indoor LED Fittings

Cost of Cost of

Item No Description Unit Total

Materials Labour

2-15-1 Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional

Cat-ll Ea. 100.00 26.00

Cat-lll Ea. 138.00 26.00

(ii) 12-14 Watts, Surge-2 KV, IP-20,

conventional 4 feet

Cat-ll Ea. 172.00 26.00

Cat-lll Ea. 210.00 26.00

(iii) 18-20 Watts, Surge - 2KV,IP-20,

conventional 4 feet

Cat-ll Ea. 210.00 26.00

Cat-lll Ea. 267.00 26.00

(iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet

Cat-ll Ea. 283.00 26.00

Cat-lll Ea. 344.00 26.00

(v) 36-40 Watts, Surge-2 KV, IP-20,

conventional 4 feet

Cat-ll Ea. 428.00 26.00

Cat-lll Ea. 504.00 26.00

2-15-2 Supplying and erecting led lamps with following

wattage capacity of 220 to 240 voltage,

minimum 15000 burning hours life, 500 V in

built-surge protection,Polycarbonate diffuser,

mounting suitable for E14 / E27 / B22 lamp

(A) LED Lamps integral type, with PC diffuser

suitable LAMP holder

(i) 2 to 3 watts

Cost of Cost of

Item No Description Unit Total

Materials Labour

Cat-II Ea. 50.00 0.00

Cat-III Ea. 69.00 0.00

(ii) 5 to 8 watts

Cat-II Ea. 80.00 0.00

Cat-III Ea. 111.00 0.00

(iii) 10 to 15 watts

Cat-II Ea. 123.00 0.00

Cat-III Ea. 187.00 0.00

(iv) 16 to 20 watts

Cat-II Ea. 179.00 0.00

Cat-III Ea. 256.00 0.00

(v) 21 to 30 watts

Cat-II Ea. 306.00 0.00

Cat-III Ea. 400.00 0.00

2-15-3 Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed

Mount Downlight with provision for spring

loaded mounting clips complete.IP20

(i) 5-9 watts,Surge-2 KV

Cat-ll Ea. 145.00 34.00

Cat-lll Ea. 184.00 34.00

(ii) 11-15 watts, Surge-2 KV

Cat-ll Ea. 351.00 34.00

Cat-lll Ea. 389.00 34.00

(iii) 16-20 watts, Surge-2 KV

Cat-ll Ea. 489.00 34.00

Cat-lll Ea. 550.00 34.00

(iv) 22-24 watts, Surge-2 KV

Cat-ll Ea. 611.00 34.00

Cost of Cost of

Item No Description Unit Total

Materials Labour

Cat-lll Ea. 717.00 34.00

(B) LED Panel Light with provision for Plane

front frame with translucent cover fixed to

housing complete.IP20

(i)up to 8 Watts,4" x 4", Surge-2 KV

Cat-ll Ea. 202.00 34.00

Cat-lll Ea. 237.00 34.00

(ii) 10 watts, 4" x 4", Surge-2 KV

Cat-ll Ea. 237.00 34.00

Cat-lll Ea. 313.00 34.00

(iii) 12-15 watts, 6" x 6", Surge-2 KV

Cat-ll Ea. 351.00 34.00

Cat-lll Ea. 428.00 34.00

(iv) 18 to 20 watts, 8" x 8", Surge- 2 KV

Cat-ll Ea. 462.00 34.00

Cat-lll Ea. 573.00 34.00

(v) 24 watts, 12" x 12" , Surge-2 KV

Cat-ll Ea. 611.00 34.00

Cat-lll Ea. 683.00 34.00

(vi) 36 watts, 24" x 24", Surge- 2KV

Cat-lll Ea. 1743.00 34.00

(vii) from 45 to 48 watts, 24" x 24", Surge-2 KV

Cat-lll Ea. 2037.00 34.00

(D) LED Strip Light

(i) Minimum 4.8W-120 LED per meter (2 wire,

IP-65) with non integral suitable Driver

Cat-ll Mtr. 54.00 34.00

Cat-lll Mtr. 100.00 34.00

(ii) Minimum 7.2W -240 LED per meter,(2 wire,

IP-65) with non integral suitable Driver

Cat-ll Mtr. 111.00 34.00

Cat-lll Mtr. 184.00 34.00

(E) Under Water Light,12V DC including

Driver,IP-67 with die-cast/deep drawn housing

with impact resistance clear toughened glass.

Cat-ll Ea. 622.00 34.00

Cat-lll Ea. 805.00 34.00

Cat-ll Ea. 843.00 34.00

Cost of Cost of

Item No Description Unit Total

Materials Labour

Cat-lll Ea. 988.00 34.00

(F) Spot Light 425 Lumens, Surge-2KV

(i) 3 to 7 Watts

Cat-ll Ea. 611.00 34.00

Cat-lll Ea. 771.00 34.00

(ii) 8 to 11 Watts

Cat-ll Ea. 973.00 34.00

Cat-lll Ea. 1320.00 34.00

(G) Step Light having Aluminium die cast and

ABS Plastic material.

(i) 5 watts, Direct/Indirect luminaire

Cat-ll Ea. 405.00 34.00

Cat-lll Ea. 534.00 34.00

(H) Mirror Light 9 Watts, wall mounted Ea. 283.00 26.00

minimum 1 feet long

(I) Adjustable spot light with COB led having

aluminium reflector of following wattage

Cat-ll Ea. 681.00 34.00

Cat-lll Ea. 817.00 34.00

Cat-ll Ea. 769.00 34.00

Cat-lll Ea. 923.00 34.00

Cat-ll Ea. 878.00 34.00

Cat-lll Ea. 1053.00 34.00

Cat-lll Ea. 2106.00 34.00

Cost of Cost of

Item No Description Unit Total

Materials Labour

2-15-4. Suppling & Erecting new 18W LED retrofit PLL Ea. 705.00 50.00

lamps with housing made of Elegantly

designed polycarbonate housing in opal finish

to provide glare free uniform light distribution

and in-built Aluminium Heat sink for better

thermal management. Lamps shall deliver

excellent illumination & visual comfort with CRI

of >80, High transmittance Opal Polycarbonate

diffuser for glare-free symmetric light

distribution. Lamps should be with 120 lm/W

System Efficacy and designed for Avg. LED

Life (L70 B35) 35,000 Burning Hours & with

high efficient Photobiologically safe LEDs.

Lamps should be Powered by an integral

electronic constant current driver offering

THD<15%, Output Short-circuit protection,

Surge Voltage protection, and other reliability

tests as per IS:15885 Part 2/Sec 13. Lamps

should be provided with 3kV surge protection.

Lamp manufacturer to have an in-house NABL-

accredited Laboratory for testing Photometric

parameters.Cat-III (Note:- During Execuvation

of work if it reurired to cut false ceiling for

providing fitting and after erection of fitting if

require to fill aditional false celling gap than

that work should be in scope of Agency.)

2-15-5. Supplying and erecting LED recessed mount Ea. 3240.00 50.00

indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt (CREE / OSRAM / PHILIPHS make

LED used in fitting ) assembled on

MCPCB,Product should Suitable to replace

Conventional (2X 36W ) T-5 Light fitting with

30W LED panel Light fitting with backlit

luminaire and customised housing having

dimension of [ ( 505mm (L) X 295mm (W) x

40mm (H)], suitable for retrofit into existing cut

out, made of elegantly designed CRCA powder

coated housing and having Micro diffuser to

provide glare free uniform light distribution.

Luminaire shall deliver excellent illumination &

visual comfort with CRI of >80, Suitable to

operating voltage on 140V to 300V A.C.,Power

Factor more than 0.95, THD < 15 %,CCT

K to 6500K, Luminaire efficacy>

lumens/watt , with external LED driver with

efficiency > 85 % ( fitting required LM-79 & LM-

80 Certificates). High transmittance Micro

diffuser for glare-free symmetric light

distribution. Lamps should be with 100 lm/W

System Efficiency and designed for Avg. LED

Life (L70 B50) of 50,000 Burning Hours & with

high efficient Photo biologically safe LEDs with

3SDCM bin. Lamps should be powered by an

Cost of Cost of

Item No Description Unit Total

Materials Labour

2-15-6. Supplying and erecting recessed mount LED Ea. 4355.00 50.00

indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt (CREE / OSRAM / PHILIPHS make

LED used in fitting ) assembled on

MCPCB,Product should Suitable to replace

Conventional (2X 28W ) T-5 Light fitting with

40W LED panel Light with backlit luminaire

and customised housing having dimension of [

suitable for retrofit into existing cut out, made

of elegantly designed CRCA powder coated

housing and having Micro diffuser to provide

glare free uniform light distribution. Luminaire

shall deliver excellent illumination & visual

comfort with CRI of >80, Suitable to operating

voltage on 140V to 300V A.C.,Power Factor

more than 0.95, THD < 15 %,CCT 3000 K to

6500K, Luminaire efficacy> 100 lumens/watt

with external LED driver with efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates).High transmittance Micro diffuser

for glare-free symmetric light distribution.

Lamps should be with 100 lm/W System

Efficacy and designed for Avg. LED Life (L70

B50) of 50,000 burning Hours with high efficient

Photo biologically safe LEDs with 3SDCM bin.

Luminaire should have integrated powered by

LED OUTDOOR FITTINGS

Note: Add Rs.200 for 10kv non integral surge protection

2-16-1. Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminium housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

(A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line

supply with over-voltage protection.

(i) 10 to 12 Watts

Cat-ll Ea. 843.00 85.00

Cost of Cost of

Item No Description Unit Total

Materials Labour

Cat-lll Ea. 1099.00 85.00

(ii) 15 to 24 Watts

Cat-lll Ea. 1720.00 85.00

(iii) above 24 to 36 watts

Cat-lll Ea. 2052.00 128.00

(B) Flood Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line

supply with over-voltage protection.

(i) above 20 to 30 watts

Cat-lll Ea. 4638.00 128.00

2-16-2. Supplying and erecting LED street light / Flood

light fittings with High power White LEDs

wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast

aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the

(A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line

supply with over-voltage protection.

(i) above 36 to 48 watts

Cat-lll Ea. 3184.00 128.00

(ii) above 48 to 60 Watts

Cat-lll Ea. 4778.00 170.00

(iii) Above 60 to 90 watts

Cat-lll Ea. 5747.00 170.00

(iv) above 90 to 120 watts

Cat-lll Ea. 6331.00 170.00

Cost of Cost of

Item No Description Unit Total

Materials Labour

(v)above 120 to 160 watts

Cat-lll Ea. 7628.00 170.00

(vi)above 160 to 200 watts

Cat-lll Ea. 8848.00 170.00

(vii)above 200 to 250 watts

Cat-lll Ea. 9992.00 170.00

(B) Flood Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line

supply with over-voltage protection.

(i) above 40 to 48 watts

Cat-lll Ea. 5015.00 128.00

(ii) above 48 to 60 Watts

Cat-lll Ea. 5416.00 128.00

(iii) Above 60 to 90 watts

Cat-lll Ea. 5858.00 170.00

(iv) above 90 to 120 watts

Cat-lll Ea. 7025.00 170.00

(v) above 120 to 160 watts

Cat-lll Ea. 8200.00 170.00

(vi) above 160 to 200 watts

Cat-lll Ea. 9382.00 170.00

(vii) above 200 to 250 watts

(C) Post Top Lantern LED fitting comprises of

finish cast aluminum spigot and spun aluminum

canopy fixed with opal polycarbonate, pipe

arrangement for vertical mounting driver and

accessories wired upto terminal block.IP

Cat-lll Ea. 3967.00 85.00

Cat-lll Ea. 4687.00 85.00

Cost of Cost of

Item No Description Unit Total

Materials Labour

2-16-3. Bollards

(a) LED Bollard fittings of minimum height 400 Ea. 1930.00 128.00

mm & dia.100mm having polycarbonate

clear/milky diffuser mounted on 3mm thick

aluminium finished powder coated pipe with

base plate 160x160mm with erection by

M8x75mm fastner with required RCC

foundation.IP65 for 9 to 20 watt ,surge-4kv cat-

(b) LED Bollard fittings of minimum height 600 Ea. 3002.00 128.00

mm & dia.100mm having polycarbonate

clear/milky diffuser mounted on 3mm thick

aluminium finished powder coated pipe with

base plate 160x160mm with erection by

M8x75mm fastner with required RCC

foundation.IP65 for 9 to 20 watt ,surge-4kv-

(c) LED Bollard fittings of minimum height 1000 Ea. 4289.00 128.00

mm & dia.100mm having polycarbonate

clear/milky diffuser mounted on 3mm thick

aluminium finished powder coated pipe with

base plate 160x160mm with erection by

M8x75mm fastner with required RCC

foundation.IP65 for 9 to 20 watt and above

,surge-4kv cat-III

SECTION 2- 17 LED SOLAR STREET LIGHTS

2-17-1. Supplying and erecting LED Solar street lights with

High power White LEDs wattage of 1Watt and

above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses with company mark/name engraved or

with 36 hours battery backup & MPPT 24V,7.5 A

charge controller with 12 hours automatic switch

on/off with wind speed resistance 44 m/s as per IEC

(A) 12W, IP-65, PV Module – 60W and 4 mtr Ea. 15933.00 0.00

poles complete erected

(B) 15W, IP-65, PV Module – 80W and 4 mtr Ea. 17899.00 0.00

poles complete erected

(C) 21W, IP-65, PV Module – 100W and 5 mtr Ea. 21153.00 0.00

poles complete erected

(D) 28W, IP-65, PV Module –100W and 6 mtr Ea. 25382.00 0.00

poles complete erected

(E) 36W,3000 lumens, IP-65, PV Module – Ea. 35797.00 0.00

2x100W and 6 mtr poles complete erected

Cost of Cost of

Item No Description Unit Total

Materials Labour

2-17-2. Supplying and Installation of Approved make

Integrated LED Solar light fitting comprising in

built Poly crystalline solar panel,Lithium-ion

V battery, LED CRI Greater than 70, CCT-

6500K, 80 lum/watt all housed in Extruded

Aluminium body,with motion sensor & auto on -

off device erected on existing pole with

following specifications.

(A) 6 watt LED light, with 7 W Solar panel, 3.7 Ea. 9763.00 85.00

V 13000 to 15000 mAh battery, 450 lm

luminus flux, suitable for mount on 3 mtr height

(B) 12 watt LED light, with 15 W Solar panel, Ea. 17085.00 128.00

3.7 V 26000 to 28000 mAh battery, 850-900 lm

luminus flux, suitable for mount on 3.5 to 4 mtr

(C) 18 watt LED light, with 22 W Solar panel, Ea. 21967.00 170.00

3.7 V 39500 to 40500 mAh battery, 1250-1350

lm luminus flux,suitable for mount on 3.5 to

mtr height pole.

2-17-3 Providing and erecting PVC body surface or Ea. 746.00 34.00

pendent mounting LED Bulk type 9 watt

Lighting Fitting with electronic driver. And

lumen output from luminaire 720lm , input

voltage range 90-300VAC , 50Hz cool

white(3000 to 6500k), inbuilt driver, -20degC to

+60degC working temperature, AL frame with

Beam Angle 120deg

2-17-4. Supplying and Erecting Of L.E.D. type High bay

fixture having Power Consumption of following

watts with, Input Voltage 110 - 290 V.AC with

full efficiency, Power Factor > 0.9 with 50/60

HZ, CCVC LED Driver used for maximum

power saving, Best Quality Aluminium alloy

housing and aluminium Dome for better heat

dissipation, CCT Cool white (6000K), CRI

Beam angle > 120 degrees, working

temperature -20 deg c to +55 deg c, Body IP

2-17-5. Supplying LED Portable/Rechargeable flood

light having die - cast aluminium enclosure

designed for maximum thermal efficiency of

130lm luminous efficiency at voltage supply

between 140-270V AV/12V DC at operating

temperature of -20 degree to 60degree celcius

with battery back up 3-4hrs

Cost of Cost of

Item No Description Unit Total

Materials Labour

SECTION 2-18 LED DRIVER

Indoor LED Fittings

2-18-1. Repairing of existing indoor LED light

fixture(tube light/panel light/spot light/strip

light/decorative wall lights etc as per sample

)by suitable driver 2 kv according to LED PCB

as per requirement of following rating wattage

(A) 1-3 watt capacity Ea. 56.00 13.00

(B) 4-6 watt capacity Ea. 89.00 13.00

(C) 8-15 watt capacity Ea. 111.00 17.00

(D) 16-24 watt capacity Ea. 208.00 17.00

(E) 25-36 watt capacity Ea. 331.00 26.00

(F) 38-50 watt capacity Ea. 412.00 26.00

LED OUTDOOR FITTINGS

2-19-1. Repairing of existing indoor LED light

fixture(flood light/street light/bollard

lights/decorative wall lights/landscape light etc

as per sample )by suitable driver 4 kv,IP65

according to LED PCB as per requirement of

following rating wattage capacity .

(A) 1-3 watt capacity Ea. 56.00 30.00

(B) 4-6 watt capacity Ea. 89.00 30.00

(C) 8-15 watt capacity Ea. 242.00 64.00

(D)16-24 watt capacity Ea. 310.00 64.00

(E) 25-36 watt capacity Ea. 433.00 64.00

(F) 38-48 watt capacity Ea. 475.00 85.00

(G) 50-80 watt capacity Ea. 793.00 85.00

(H) 90-100 watt capacity Ea. 1229.00 102.00

Street light Automation

Cost of Cost of

Item No Description Unit Total

Materials Labour

2-20-1. Smart 4G Timer, Supply of IoT based 4G Smart Streetlight Control &

Monitoring System having a Smart Panel comprising of 3 Phase IoT

Streetlight Smart 4G Timer with 16x2 LCD to display RSSI, relay status,

RTC time & diagnostics., Controller works on 3-phase & also on any

available 1-Phase., Controller with 8-hour battery backup during

external power failure. External power failure alert immediately to

cloud., 110-630 V AC @ 50-60 Hz – 3 phase operating range., Standby

power consumption <3W., Smart 4G Timer with RS232 port for DLMS

Energy meter., Smart 4G Timer must be compatible with any make /

brand of DLMS (RS232) Energy Meter., DI: 4 Nos. (3 Contactor / Latch

detection, 1 for Door Sensor.)., DO: 3 Relays for Independent control

each phase (R, Y, B) with 1 extra spare relay., Smart 4G Timer with

dual SIM functionality for connectivity backup., 4G M2M SIM 3-Year

communication included., Local configuration via WiFi / BLE for

maintenance or during force majeure., GPS chip inbuilt of Smart 4G

Timer for auto location tracking & astronomic schedule location.,

programmable schedules., Astronomic scheduling with monthly offsets.,

Smart 4G Timer has inbuilt timer stores schedules locally & also stores

schedule execution logs locally, syncs to cloud whenever connected to

cloud., Auto-scheduler overrides manual operations., Monitoring &

alerts for MCB trips., Over/under voltage, current, overload, power

factor & short circuit protections with alerts via Dashboard, App, SMS,

WhatsApp & Email., Contactor / Latch chattering protection & alerts.,

Smart 4G Timer with neutral failure protection and alert., Bulit-in

Watchdog for anti-jamming., Smart 4G Timer must send Regular

"heartbeat" on software for CCMS status.,

Accelerometer for tamper & panel movement detection & alerts., Smart

4G Timer must be tested from an NABL Lab for Surge Test @ 6 KV

(IEC 61000-4-5), ESD Test @ 4 KV (IEC 61000-4-2), EFT @ 2 KV (IEC

61000-4-4), Conducted Emission @ 150 KHz-30 MHz (CISPR11),

Damp Heat Test (40 Deg C @ 95% RH) 2 cycles of 12+12 hours (IS:

9000 (Part 5/Sec.2):1981 latest) with all test passing criteria as

“Temporary degradation or loss of function or performance which is self-

recoverable”., FOTA functionality required for upgrades., Smart 4G

Timer sends & stores online/offline data of controller & load for lamp

burn hours analysis.,

Cost of Cost of

Item No Description Unit Total

Materials Labour

It stores & syncs connectivity logs for configuration of network Ea. 93500.00 5933.00

connections & analytics., PANEL & SWITCHGEAR, The panel includes

a Class 1 DLMS energy meter NABL approved with 1-2 months of

stored data of daily, hourly, monthly, load survey, instantaneous,

events, tamper data & with power events stored in meter memory for

audit purpose., Must monitor V, I, KWH, KVA, PF, KVAH, etc., Panel

made with 2 mm CRCA sheet with ground mountable stand complete

with gland plate, waterproof glands, earthing bolt., IP55, weatherproof

panel with RAL7035 powder-coated., Smart 4G Timer must be fitted on

removable terminal sockets for easy maintenance., Switchgear includes

3 Nos. 3 pole Contactor / Latch having minimum 50 A Load carrying

capacity per phase, all other switchgear & wires: 40 A load carrying

capacity., 1 Nos. 4P MCB 10 kA for Incomer & 6 Nos. 1P MCBs 10 kA

for Outgoing., Phase-Wise Bypass MCBs required., 4P RCCB 100 mA.,

door sensor. Also, provide lock & key facility., Panel mount outdoor

antenna for GSM, GPS., Canopy design for draining down water.,

CCMS SMART SOFTWARE, OAuth 2.0 APIs for sending data to

Government clouds/software, etc., CCMS Web dashboard with secure

password & OTP login., Hosted on trusted cloud, data security, antivirus

& attack protection., HTTPS., AES256-bit encryption., Vulnerability

Assessment and Penetration Testing (VAPT) certificate for CCMS

Software., Streetlight management software for load status, live

analytics & reports., Energy meter data tables (kW, kWh, PF, I, V, etc.)

available., Utility monthly bill reconciliation & Class 1 accuracy reports

for billing, energy monitoring & auditing for streetlight load., Fault

detection., Light fault 99% analysis on dashboard using energy

monitoring., WhatsApp integration., Hierarchy-wise reporting & alerts.,

GIS mapping of live connected streetlight control panels, poles &

streetlights., MQTT protocol., Smartphone app with local configuration

& navigation., Monitoring & reporting of lighting parameters., Facility for

media attachments for site photos/videos/work permits/checklists, etc.

per Feeder Panel for remote verification., Asset management module

for streetlight infrastructure data., Complaint/service task management

with history & escalation must be available., Android & iOS App for

dashboard analytics, graphs, energy data, alerts., 3 Years CCMS Web

Software & Cloud Server Hosting subscription included., Customizable,

user-friendly dashboard.,

2-20-2. Smart 4G Timer, Supply of IoT based 4G Smart Streetlight Control &

Monitoring System having a Smart Panel comprising of 1 Phase IoT

Streetlight Smart 4G Timer with 16x2 LCD to display RSSI, relay status,

RTC time & diagnostics., Controller with 8-hour battery backup during

external power failure. External power failure alert immediately to

cloud., 110-630 V AC @ 50-60 Hz – 1 phase operating range., Standby

power consumption <3W., Smart 4G Timer with RS232 port for DLMS

Energy meter., Smart 4G Timer must be compatible with any make /

brand of DLMS (RS232) Energy Meter., DI: 2 Nos. (1 Contactor / Latch

detection, 1 for Door Sensor.)., DO: 1 Relay for control with 1 extra

spare relay., Smart 4G Timer with dual SIM functionality for connectivity

backup., 4G M2M SIM 3-Year communication included., Local

configuration via WiFi / BLE for maintenance or during force majeure.,

GPS chip inbuilt of Smart 4G Timer for auto location tracking &

astronomic schedule location., 50 programmable schedules.,

Astronomic scheduling with monthly offsets.,

Cost of Cost of

Item No Description Unit Total

Materials Labour

Smart 4G Timer has inbuilt timer stores schedules locally & also stores

schedule execution logs locally, syncs to cloud whenever connected to

cloud., Auto-scheduler overrides manual operations., Monitoring &

alerts for MCB trips., Over/under voltage, current, overload, power

factor & short circuit protections with alerts via Dashboard, App, SMS,

WhatsApp & Email., Contactor / Latch chattering protection & alerts.,

Smart 4G Timer with neutral failure protection and alert., Bulit-in

Watchdog for anti-jamming., Smart 4G Timer must send Regular

"heartbeat" on software for CCMS status., Accelerometer for tamper &

panel movement detection & alerts., Smart 4G Timer must be tested

from an NABL Lab for Surge Test @ 6 KV (IEC 61000-4-5), ESD Test

@ 4 KV (IEC 61000-4-2), EFT @ 2 KV (IEC 61000-4-4), Conducted

Emission @ 150 KHz-30 MHz (CISPR11), Damp Heat Test (40 Deg C

@ 95% RH) 2 cycles of 12+12 hours (IS: 9000 (Part 5/Sec.2):1981

latest) with all test passing criteria as “Temporary degradation or loss of

function or performance which is self-recoverable”., FOTA functionality

required for upgrades., Smart 4G Timer sends & stores online/offline

data of controller & load for lamp burn hours analysis., It stores & syncs

connectivity logs for configuration of network connections & analytics.,

PANEL & SWITCHGEAR,

The panel includes a Class 1 DLMS energy meter NABL approved with Ea. 65500.00 4238.00

1-2 months of stored data of daily, hourly, monthly, load survey,

instantaneous, events, tamper data & with power events stored in meter

memory for audit purpose., Must monitor V, I, KWH, KVA, PF, KVAH,

etc., Panel made with 2 mm CRCA sheet with ground mountable stand

complete with gland plate, waterproof glands, earthing bolt., IP55,

weatherproof panel with RAL7035 powder-coated., Smart 4G Timer

must be fitted on removable terminal blocks for easy maintenance.,

Switchgear includes 1 Nos. 3 pole Contactor / Latch having minimum

50 A Load carrying capacity per phase, all other switchgear & wires:

A load carrying capacity., 1 Nos. 2P MCB 10 kA for Incomer & 2 Nos.

1P MCBs 10 kA for Outgoing., Phase Bypass MCBs required., 2P

RCCB 100 mA., door sensor. Also, provide lock & key facility., Panel

mount outdoor antenna for GSM, GPS., Canopy designed for draining

down water., SOFTWARE, OAuth 2.0 APIs for sending data to

Government clouds/software, etc., CCMS Web dashboard with secure

password & OTP login., Hosted on trusted cloud, data security,

antivirus & attack protection., HTTPS., AES256-bit encryption.,

Vulnerability Assessment and Penetration Testing (VAPT) certificate for

CCMS Software., Streetlight management software for load status, live

analytics & reports., Energy meter data tables (kW, kWh, PF, I, V, etc.)

available., Utility monthly bill reconciliation & Class 1 accuracy reports

for billing, energy monitoring & auditing for streetlight load., Fault

detection., Light fault 99% analysis on dashboard using energy

monitoring., WhatsApp integration., Hierarchy-wise reporting & alerts.,

GIS mapping of live connected streetlight control panels, poles &

streetlights., MQTT protocol., Smartphone app with local configuration

& navigation., Monitoring & reporting of lighting parameters., Facility for

media attachments for site photos/videos/work permits/checklists, etc.

per Feeder Panel for remote verification., Asset management module

for streetlight infrastructure data., Complaint/service task management

with history & escalation must be available., Android & iOS App for

dashboard analytics, graphs, energy data, alerts., 3 Years CCMS Web

Software & Cloud Server Hosting subscription included., Customizable,

user-friendly dashboard.,

Cost of Cost of

Item No Description Unit Total

Materials Labour

2-20-3. Smart 4G Timer, Supply of IoT based 4G Smart Streetlight Control &

Monitoring System having a Smart Panel comprising of 3 Phase IoT

Streetlight Smart 4G Timer with 16x2 LCD to display RSSI, relay status,

RTC time & diagnostics., Controller works on 3-phase & also on any

available 1-Phase., Controller with 8-hour battery backup during

external power failure. External power failure alert immediately to

cloud., 110-630 V AC @ 50-60 Hz – 3 phase operating range., Standby

power consumption <3W., Smart 4G Timer with RS232 port for DLMS

Energy meter & RS485/UART/RS232 port for any external device

communication., Smart 4G Timer must be compatible with any make /

brand of DLMS (RS232) Energy Meter., DI: 5 Nos. (3 Contactor / Latch

detection, 1 for SPD, 1 for Door Sensor.)., DO: 3 Relays for

Independent control each phase (R, Y, B) with 1 extra spare relay.,

Highly Precise TCXO RTC with 10-year battery reserve., Automatically

syncs with internal, cellular, server & GPS clock; with logs stored in the

CCMS Web Software., Smart 4G Timer with dual SIM functionality for

connectivity backup., 4G M2M SIM 5-Year communication included.,

Local configuration via WiFi / BLE for maintenance or during force

majeure., GPS chip inbuilt of Smart 4G Timer for auto location tracking

& astronomic schedule location., 50 programmable schedules.,

Astronomic scheduling with monthly offsets., Smart 4G Timer has inbuilt

timer stores schedules locally & also stores schedule execution logs

locally, syncs to cloud whenever connected to cloud., Auto-scheduler

overrides manual operations., Monitoring & alerts for MCB trips & SPD

failure., Over/under voltage, current, overload, power factor & short

circuit protections with alerts via Dashboard, App, SMS, WhatsApp &

Email., Contactor / Latch chattering protection & alerts., Smart 4G

Timer with neutral failure protection and alert., During earthing failure to

Panel, it must generate alerts on CCMS Dashboard for safety., Bulit-in

Watchdog for anti-jamming., Smart 4G Timer must send Regular

"heartbeat" on software for CCMS status., Accelerometer for tamper &

panel movement detection & alerts., Smart 4G Timer must be tested

from an NABL Lab for Surge Test @ 6 KV (IEC 61000-4-5), ESD Test

@ 4 KV (IEC 61000-4-2), EFT @ 2 KV (IEC 61000-4-4), Conducted

Emission @ 150 KHz-30 MHz (CISPR11), Damp Heat Test (40 Deg C

@ 95% RH) 2 cycles of 12+12 hours (IS: 9000 (Part 5/Sec.2):1981

latest) with all test passing criteria as “Temporary degradation or loss of

function or performance which is self-recoverable”., FOTA functionality

required for upgrades., Smart 4G Timer sends & stores online/offline

It stores & syncs connectivity logs for configuration of network

connections & analytics., PANEL & SWITCHGEAR, The panel includes

a Class 1 DLMS energy meter NABL approved with 1-2 months of

stored data of daily, hourly, monthly, load survey, instantaneous,

events, tamper data & with power events stored in meter memory for

audit purpose., Must monitor V, I, KWH, KVA, PF, KVAH, etc., Panel

made with 2 mm CRCA sheet with ground mountable stand complete

with gland plate, waterproof glands, earthing bolt., Panel to have

transparent window to view DISCOM Energy Meter display., IP55,

weatherproof panel with RAL7035 powder-coated., Smart 4G Timer

must be fitted on removable terminal sockets for easy maintenance.,

Switchgear includes 3 Nos. 3 pole Contactor / Latchs having minimum

100 A Load carrying capacity per phase, all other switchgear & wires:

60 A load carrying capacity., Contactor / Latch rating such that spare

load like decorative lights can be operated., Spare 3 Pole Contactor /

Latch (1 Nos.) also available in panel for replacement during failure.,

Nos. 4P MCB 10 kA for Incomer & 9 Nos. 1P MCBs 10 kA for

Outgoing., Phase-Wise Bypass MCBs required., 4P RCCB 100 mA.,

40kA, 335V smart SPD with feedback detection to send alert of SPD

failure to CCMS web software., Suitable 3 Phase RYBN 415 V AC

isolation transformer for control circuit stable feed., 1 Nos. Input &

Nos. Output RYBN TPN connectors for reliable & safe termination.,

Nos. DIN Rail Type R, Y, B indicators for each TPN connector., 2 Door

Panel. 1 in Front & 1 at Back., door sensor. Also, provide lock & key

facility., High quality ISI/BIS, FR Cables to be used., Double lugging to

be avoided for potential fire hazard., Minimum Dimensions of Panel:

1100 x 650 x 550 mm & stand height dimensions: 700 mm., Panel must

have clear 20% spare space for future upgradation., Panel must be

equipped with standard Indian type plug with 6 A 2 pole MCB &

including light indicator.,

Cost of Cost of

Item No Description Unit Total

Materials Labour

Panel must contain min. 150 mm space at bottom (TPN connector end) Ea. 243800.00 5933.00

for cable terminations., Automatic door sensor based light (with

protection MCB) for viewing/maintenance., Thermostat & Space heater

(with protection MCB) for cold weather conditions with automatic on/off

controller., Panel must have adequate provision to mount DISCOM

Energy meter along with spare space around it., The switchgear

compartment must have cover on top with protective transparent 4 mm

acrylic sheet, with accessible window to operate switchgear

components., Switch gear, energy meter & Smart 4G Timer must be

warranted for 5 years., Panel mount outdoor antenna for GSM, GPS.,

Canopy design for draining down water., CCMS SMART SOFTWARE,

OAuth 2.0 APIs for sending data to Government clouds/software, etc.,

CCMS Web dashboard with secure password & OTP login., Hosted on

trusted cloud, data security, antivirus & attack protection., HTTPS.,

AES256-bit encryption., Vulnerability Assessment and Penetration

Testing (VAPT) certificate for CCMS Software., Streetlight management

software for load status, live analytics & reports., Energy meter data

tables (kW, kWh, PF, I, V, etc.) available., Utility monthly bill

reconciliation & Class 1 accuracy reports for billing, energy monitoring

& auditing for streetlight load., Fault detection., Light fault 99% analysis

on dashboard using energy monitoring., WhatsApp integration.,

Hierarchy-wise reporting & alerts., GIS mapping of live connected

streetlight control panels, poles & streetlights., MQTT protocol.,

Smartphone app with local configuration & navigation., Monitoring &

reporting of lighting parameters., Facility for media attachments for site

photos/videos/work permits/checklists, etc. per Feeder Panel for remote

verification., Asset management module for streetlight infrastructure

data., Complaint/service task management with history & escalation

must be available., Android & iOS App for dashboard analytics, graphs,

energy data, alerts., 5 Years CCMS Web Software & Cloud Server

Hosting subscription included., Customizable, user-friendly dashboard.,

2-20-4. Smart 4G Timer, Supply of IoT based 4G Smart Streetlight Control &

Monitoring System having a Smart Panel comprising of 1 Phase IoT

Streetlight Smart 4G Timer with 16x2 LCD to display RSSI, relay status,

RTC time & diagnostics., Controller with 8-hour battery backup during

external power failure. External power failure alert immediately to

cloud., 110-630 V AC @ 50-60 Hz – 1 phase operating range., Standby

power consumption <3W., Smart 4G Timer with RS232 port for DLMS

Energy meter & RS485/UART/RS232 port for any external device

communication., Smart 4G Timer must be compatible with any make /

brand of DLMS (RS232) Energy Meter., DI: 3 Nos. (1 Contactor / Latch

detection, 1 for SPD, 1 for Door Sensor.)., DO: 1 Relay for control with

1 extra spare relay., Highly Precise TCXO RTC with 10-year battery

reserve., automatically syncs with internal, cellular, server & GPS clock;

with logs stored in the CCMS Web Software., Smart 4G Timer with dual

SIM functionality for connectivity backup., 4G M2M SIM 5-Year

communication included., Local configuration via WiFi / BLE for

maintenance or during force majeure., GPS chip inbuilt of Smart 4G

Timer for auto location tracking & astronomic schedule location.,

programmable schedules., Astronomic scheduling with monthly offsets.,

Smart 4G Timer has inbuilt timer stores schedules locally & also stores

schedule execution logs locally, syncs to cloud whenever connected to

cloud., Auto-scheduler overrides manual operations., Monitoring &

alerts for MCB trips & SPD failure., Over/under voltage, current,

overload, power factor & short circuit protections with alerts via

Dashboard, App, SMS, WhatsApp & Email., Contactor / Latch

chattering protection & alerts., Smart 4G Timer with neutral failure

protection and alert., During earthing failure to Panel, it must generate

alerts on CCMS Dashboard for safety., During earthing failure to Panel.

it must generate alerts on CCMS Dashboard for safety., Bulit-in

Watchdog for anti-jamming., Smart 4G Timer must send Regular

"heartbeat" on software for CCMS status., Accelerometer for tamper &

panel movement detection & alerts.,

Cost of Cost of

Item No Description Unit Total

Materials Labour

Smart 4G Timer must be tested from an NABL Lab for Surge Test @

KV (IEC 61000-4-5), ESD Test @ 4 KV (IEC 61000-4-2), EFT @ 2 KV

(IEC 61000-4-4), Conducted Emission @ 150 KHz-30 MHz (CISPR11),

Damp Heat Test (40 Deg C @ 95% RH) 2 cycles of 12+12 hours (IS:

9000 (Part 5/Sec.2):1981 latest) with all test passing criteria as

“Temporary degradation or loss of function or performance which is self-

recoverable”., FOTA functionality required for upgrades., Smart 4G

Timer sends & stores online/offline data of controller & load for lamp

burn hours analysis., It stores & syncs connectivity logs for configuration

of network connections & analytics., PANEL & SWITCHGEAR,

The panel includes a Class 1 DLMS energy meter NABL approved with

1-2 months of stored data of daily, hourly, monthly, load survey,

instantaneous, events, tamper data & with power events stored in meter

memory for audit purpose., Must monitor V, I, KWH, KVA, PF, KVAH,

etc., Panel made with 2 mm CRCA sheet with ground mountable stand

complete with gland plate, waterproof glands, earthing bolt., Panel to

have transparent window to view DISCOM Energy Meter display., IP55,

weatherproof panel with RAL7035 powder-coated., Smart 4G Timer

must be fitted on removable terminal blocks for easy maintenance.,

Switchgear includes 1 Nos. 3 pole Contactor / Latch having minimum

100 A Load carrying capacity per phase, all other switchgear & wires:

60 A load carrying capacity., Contactor / Latch rating such that spare

load like decorative lights can be operated., Spare 3 Pole Contactor /

Latch (1 Nos.) also available in panel for replacement during failure.,

Nos. 2P MCB 10 kA for Incomer & 3 Nos. 1P MCBs 10 kA for

Outgoing., Phase Bypass MCBs required., 2P RCCB 100 mA., 40kA,

335V smart SPD with feedback detection to send alert of SPD failure to

CCMS web software., Suitable 1 Phase 415 V AC isolation transformer

for control circuit stable feed., 1 Nos. Input & 1 Nos. Output TPN

connectors for reliable & safe termination., 2 Nos. DIN Rail Type power

line indicators for each TPN connector., 2 Door Panel. 1 in Front & 1 at