Tender ID

DEFPROC

Active

Works

Civil Works

ADDN / ALTN AND SPL REPAIRS TO OFFRS JCO OR MD ACCN AT BAREILLY UNDER GE WEST BAREILLY

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

Bareilly, Uttar Pradesh

Amount: ₹13.4 CrCloses: 18 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published21 Oct 2026
Submission Opens11 Nov 2026
Closes18 Nov 2026
Bid Opening25 Nov 2026

Tender Value

₹13.4 Cr

EMD Value

₹10.0 L

Closing Date

18 Nov 2026, 9:00 am

Tender Inviting Organisation

Name

HQ CE Bareilly Zone

Address

HQ CE BAREILLY ZONE

Work Description

ADDN / ALTN AND SPL REPAIRS TO OFFRS JCO OR MD ACCN AT BAREILLY UNDER GE WEST BAREILLY

Tender Information

Tender ID

2026_MES_794917_1

Reference Number

CEBZ/BLY/T-32 OF 2026-27

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Location

Bareilly

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredSCANNED COPY OF APPLICATION FOR ISSUE OF TENDER AND DD TOWARDS TENDER FEE (.pdf)

RequiredSCANNED COPY OF IP DULY SIGNED (.pdf)

RequiredSCANNED COPY OF GST AND EPF (.pdf)

RequiredSCANNED COPY OF OTHER DOCS AS MENTIONED IN NIT (.pdf)

RequiredSCANNED COPY OF ADDITIONAL DOCS AS MENTIONED IN NIT FOR UNENLISTED CONTRACTORS (.pdf)

RequiredSCANNED COPY OF EMD (.pdf)

Finance

Requiredboq (.xls)

Fee & Financial Details

Tender Fee Amount

₹3,000

Tender Fee Payable To

GE West Bareilly

EMD Fee Amount

₹10.0 L

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

21 Oct 2026

Published

21 Oct 2026

Bid Opening

25 Nov 2026

Download Starts

21 Oct 2026

Download Ends

18 Nov 2026

Submission Starts

11 Nov 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (269 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	ITEM OF B/R	-	-	-	-
2	M & L for non-skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match of tiles and screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes including dismantling of floor tiles and hearting complete all as specified.	4,050	Sqm	-	-
3	M & L for non-skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match of tiles and in vertical surfaces of tiles and rendering 10 mm thick in cement mortar 1:4, including dismantling as in backing layer complete all as specified.	677	Sqm	-	-
4	M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling of tiles and screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes including dismantling of floor tiles and hearting complete all as specified.	694	Sqm	-	-
5	M&L for Vitrified double charged coloured ceramic tiles light shade 8-10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm and not exc 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement and with 15mm thick screed bed 1:6 cement motar including dismantling of floor tiles and hearting complete all as specified and directed.	1,140	Sqm	-	-
6	M&L for Vitrified double charged coloured ceramic tiles light shade 8-10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm and not exc 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement and in vertical surfaces including dismantling of tiles and rendering 10 mm thick in cement mortar 1:4, as in backing layer complete all as specified.	72	Sqm	-	-
7	M&L for Glazed (plain /coloured) ceramic tiles wall (600x300) mm 7 mm thick on vertical faces of walls including 10mm thick rendeing in CM 1:4 set jointed in neat cement slurry and pointed in coloured cement to match including taking down old dado/skirting complete all as specified.	3,770	Sqm	-	-
8	M&L for Providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar 1:2 to match the existing apron complete all as specified and directed.	1,910	RM	-	-
9	M & L for Post Construction Anti TermiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor sall as specified and directed.	3,158	Sqm	-	-
10	Taking down chowkats with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all as specified and directed.	1,196	Each	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.25 MB

Work Item Documents

doc.pdf

Tender Documents • 2.01 MB

BOQ_891529.xls

BOQ • 0.48 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

ITEM OF B/R

M & L for non-skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match of tiles and screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes including dismantling of floor tiles and hearting complete all as specified.

4,050

Sqm

M & L for non-skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match of tiles and in vertical surfaces of tiles and rendering 10 mm thick in cement mortar 1:4, including dismantling as in backing layer complete all as specified.

677

Sqm

M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling of tiles and screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes including dismantling of floor tiles and hearting complete all as specified.

694

Sqm

M&L for Vitrified double charged coloured ceramic tiles light shade 8-10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm and not exc 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement and with 15mm thick screed bed 1:6 cement motar including dismantling of floor tiles and hearting complete all as specified and directed.

1,140

Sqm

M&L for Vitrified double charged coloured ceramic tiles light shade 8-10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm and not exc 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement and in vertical surfaces including dismantling of tiles and rendering 10 mm thick in cement mortar 1:4, as in backing layer complete all as specified.

Sqm

M&L for Glazed (plain /coloured) ceramic tiles wall (600x300) mm 7 mm thick on vertical faces of walls including 10mm thick rendeing in CM 1:4 set jointed in neat cement slurry and pointed in coloured cement to match including taking down old dado/skirting complete all as specified.

3,770

Sqm

M&L for Providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar 1:2 to match the existing apron complete all as specified and directed.

1,910

M & L for Post Construction Anti TermiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor sall as specified and directed.

3,158

Sqm

Taking down chowkats with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all as specified and directed.

1,196

Each