Panam High Level Canal

Name of work:Providing truss type foot bridge at ch. 660 mt. of 3/R Distributory of LBMC of PHLC Project.

Estimated Qty.may Rate

Item No. Description of Item be more or less Unit In-Figure In words Amount

Item No.1:- Clearing the silt from the

canal/drain bed by a digging the same to the

required bed level and gradient including Rupees Four

depositing the excavated earth regularly in Hundred Thirty

1 spoil bank for utilizing the same preparing the 68.000 Cum 433.40

Three And Paise

banks after breaking clods as and where Forty Only

directed for all leads and lifts. For Canals

Between 21 to 250 Cusec.

Item No.2:-Excavation for foundation in all

sorts of soil including yellow sandy gravelly

soils, soft & hard murrum etc. in dry condition Rupees One

including depositing the excavated stuff in Hundred Two

2 uniform layers in banks or as and where 253.230 Cum 102.40

And Paise Forty

directed etc. complete for lead up to 500 m Only

and all lift. (By Machinery)Excluding

Item No.3:-Providing & Laying in position

"NOMINAL MIX" cement concrete using

cement, sand and crushed aggregate by mass

and machine mix for C.C./R.C.C work incl.

necessary formworks centering, scaffolding, Rupees Three

compaction by vibrator, curing as directed Thousand Nine

with all lead & lift etc complete Without

Dewatering and excluding cost of steel

reinforcement. (A) For Foundation concrete /

General purpose (c) C. C. Nominal Mix, M-15

Item No.4: -Providing & Laying in position

"NOMINAL MIX" cement concrete using

cement, sand and crushed aggregate by mass

and machine mix for C.C./R.C.C work incl. Rupees Four

necessary formworks centering, scaffolding, Thousand Two

compaction by vibrator, curing as directed

with all lead & lift etc complete Without Six Only

Dewatering and excluding cost of steel

reinforcement.(f) C. C. Nominal Mix, M-20 and

Item No.5:-Providing & placing in position

reinforcement bars including cutting, bending, Rupees Eighty

5 welding joints where necessary, hooking etc. 0.240 M.T 82019.00 Two Thousand

complete as per drawing for all leads and lifts. Nineteen Only

TMT / CRS (FE 500 D)

Item No.6:-Fabricating supplying and erecting

steel truss including walkway platform fitting

of chequered plate, railling etc. complete Rupees One

including cost of materials, fabrication cutting,

6 6.971 M.T 120662.00 Thousand Six

welding etc. and painting with one primer

coat and two costs of anticorrosive paint etc.

comp. as per drawing and specification

IN WORDS : #NAME?

Deputy Executive Engineer

Panam Highlevel Canal Sub Div. no.3

I/We am/are willing to carry out the work at………………...… % above/below percent (Should be written in figures and words) of

the estimated rate mentioned above. Amount of my /our tender works out as under.

* Estimated amount

Rs. …………… put to tender Rs. …………

Add …….%above Rs. …………

Rs ……………. Net Rs. …………

In words ………………………………..

All work shall be carried out as per Public Works Department Handbook and other specifications of

Division or directed.

All the columns in schedule should be filled in ink and the total of the entries in the last coulmn

should be struck by the contractor under his signature.

Rates quoted include clearance of site (prior commencement of work and at its close) in all respects

and hold good for work under all conditions, site, moisture, weather etc.

To be continued on additional sheets, if found necessary.

Executive Engineer

Panam Project Division