REPAIRS AND RESURFACING OF BITUMEN ROAD ALONG WITH ROAD FURNITURE UNDER AGE BR III OF GE ND, VISAKHAPATNAM.

M & L for repairs to Pot Holes exceeding 30 mm depth and not exceeding 1.00 Sq.m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25mm depth, making good by applying tack coat with bituminous primer at 5 Kg per 10 Sq.m, putting in premixed bituminous macadam, rolled and consolidated with power road roller of 8 to 12 ton capacity and sealed with binder 9.8 kg per 10 sq.m, blinded with 0.09 cu.m of stone chippings, 6.3mm size and again rolled and consolidated with power road roller of 8 to 12 ton capacity including supply of premixed macadam, binder and chippings complete all as specified and as directed.

M & L for Premixed Bituminous Macadam laid / rolled and compacted to required gradient and camber [consolidate thickness 75mm or less] using paving bitumen of Grade VG - 30 as binder with 4% by weight of total mix using Hot Mix Plant and Mechanical Paver, rolled and compacted with power road roller of 8 to 12 ton capacity to required camber and gradient complete all as specified and as directed.

M & L for Preparing existing Black Top Surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt etc. and applying evenly a priming / tack coat with bituminous primer using paving bitumen of grade VG-10 at 5 KG per 10 Sq.m of paving bitumen and laying Bituminous Premixed Semi Dense Asphaltic Concrete, 40 mm consolidated thickness, using paving bitumen of Grade VG – 30, with 5.5% of binder content by weight of total mix using Hot Mix Plant and Mechanical Paver, rolled and compacted with power road roller of 8 to 12 ton capacity to required camber and gradient complete all as specified. Note: Minimum Bitumen content shall be 5.5% as specified here in above. Please note that if the actual quantity of bitumen to be incorporated on approval of Mix–Design is found more than the minimum bitumen content specified above, the same shall be provided without any extra cost.

M & L for Road Marking Strips, Lines, Dashes, Arrows, Letters etc of 2.5 mm thick [Reflective Type] of colour White or Golden Yellow on roads, pavements and the like exceeding 10cm wide with Hot Thermo Plast material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, driven by skilled operator on road surface complete as per MOSRT & H specifications including cleaning the road surface of all dirt, scales, oil grease and foreign materials etc complete all as specified and as directed.

S & F in repairs Solar Road Studs [Bi-Directional] made of Aluminium Die cast matt finish of size 125 X 125 X 25mm [Approximately], working on High Efficiency Mono-Crystalline Solar Panel 2.4 V / 0.3 Watt, One Ni-Mh or NI-cd Rechargeable Battery [1.2V / 1600 MA] with Six Super Bright LEDs with 10,000 to 18,000 mcd [Millicandela], with a minimum Operating time of 3-4 consecutive days with full charge, viewing distance / visibility not less than 800m with 2 Hz Flash Rate, Self operated from Dusk to Dawn, anti twist ribs on the bottom anchor / shank with high intensity reflective grade polymer sticker and conforming to IS - 12063, of Colour yellow or red or blue or green or white as approved by GE complete all as specified and as directed.

S & F in repairs solar Road Stud, reflective type of metal body alloy of size 100mm X 100mm X 20 mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions, Colour- Amber/Red/White as approved by GE complete all as specified and as directed.

Demolition of Brick / Stone Masonry built in Cement Mortar including all quoins arches pillars etc and removing rubbish off the premises complete all as specified and as directed.

M & L for PCC 1:4:8, Type D-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed.

M & L for Providing Precast Cement Concrete Solid Block Masonry of 1:3:6, Type C1 using 20mm graded stone aggregate exceeding 100mm width and setting in mortar,curve on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, including mixing water proofing compound as per manufacturers instructions and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.