Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹2.4 CrAccepted-Finance 126 CHITTRANJAN AVENUE 2ND FLOOR KOLKATA 700073 | KOLKATA | WEST BENGAL | 700073 | ₹2.4 Cr | L-1 | Accepted-Finance L-1 |
| 2 | L-2₹2.5 Cr+₹4.2 L (1.72%)Rejected-Finance HOLDING NO 06 623 GYAN VILLA MANAV KALYAN ROAD OPP BRAHMA KUMARI ASHRAM LANE TINSUKIA ASSAM PIN 786125 | TINSUKIA | TINSUKIA | ASSAM | 786125 | ₹2.5 Cr+₹4.2 L (1.72%) | L-2 | Rejected-Finance L-2 |
| 3 | Rejected-Technical | - | - | Rejected-Technical Non-Responsive |
| 4 | Rejected-Technical PO HAZARA OLD HOSHIARPUR ROAD VILLAGE DHADDA JALANDHAR 144025 | JALANDHAR | PUNJAB | 144025 | - | - | Rejected-Technical Non-Responsive |
| 5 | Rejected-Technical | - | - | Rejected-Technical Non-Responsive |
Tender Value
₹2.3 Cr
EMD Value
₹2.3 L
Closing Date
18 Jul 2024, 11:00 amClosed
Regional Officer
Regional Office, House No.522, Milan Nagar (Gutlung) Tezpur, Assam-784001
Road Safety measures on Meka-Roing-Hunli road section from Km 0.000 to Km 19.824 of NH-313 regarding rectification of accidents spots under BRO Project Udayak in the State of Arunachal Pradesh for the year 2023-24
2024_MoRTH_816122_1
Tender/Road Safety AP/2023-24/NH(O)/02
Open Tender
Civil Works
Item Rate
90 days
Tezpur, Assam-784001
As per Tender Documents
5 documents required · 5 mandatory
₹5,000
Yes
RPAO NH, MoRTH
₹2.3 L
Tezpur, Assam-784001
19 Aug 2024
11 Jul 2024
19 Jul 2024
11 Jul 2024
18 Jul 2024
11 Jul 2024
11 Jul 2024 - 15 Jul 2024
15 Jul 2024
Amount
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes.)
Direction and place Identification signs with size more than 0.9 sqm size board. (Providing and erecting direction and place identification retro-reflectorised sign asper IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation witrh M 15 grade cement concrete 45 cmx 45 cm x 60 cm, 60 cm below ground level as per approved drawing)
Road Markers/Road Stud with lense Reflector (Providing and fixing of road stud 100x 100 mm, die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973)
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2
Lighting on Bridges (Providing and fixing lighting on bridges, mounted on steel hollow circular poles of standard specifications, 5 m high fixed on parapets with cement concrete, 20 m apart and fitted with sodium vapour lamp)
Fog Spray (Providing and applying low viscosity bitumen emulsion for sealing cracks less than 3 mm wide or incipient fretting or disintegration in an existing bituminous surfacing).
Supplying and installation of delineators (road way indicators, hazard markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings.
Providing and erecting Solar street light mounted on a steel circular hollow pole of standard specifications for street lighting, 9 m high spaced 40 m apart, 1.8 m overhang on both sides if fixed in the median and on one side if fixed on the footpath.
Providing and fixing High Mast lighting Octagonal Tower with Integrated all in one solar Led street light
Retro Reflective Tapes for Crash barriers and Parapets.
Excavation for structure (Earthwork in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work)Ordinary soil
PCC Grade M-15 Plain/Reinforced cement concrete in Open Foundation complete as Drawing and Technical Specification(For Crash Barrier foundation taking 10% over head charges)
Providing and erecting a "Thrie" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150x75x5 mm spaced 2 mtr centre- to- centre, 2 m high with 1.15 m below ground level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5 mm, 546 mm long complete as per clause 810 of MoSRT&H specifications. i/c PCC M-15 foundation and excavation
M/s. GRRB ASSOCIATES
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .