Const. of Boundary wall, Approach road, earth filling Building Repairing of Uttar Bijni S.S. Ltd. in Baksa District TN_83_i

Amount

BRICK BOUNDARY WALL 23.2:- Dismantling plain cement concrete including disposal of debris as directed for all levels. (i) Prop. 1:4:8 or leaner Mix, Post, Wall

23.3. Demolishing RCC work including stacking of steel bars and disposal of unserviceble materials directed for all levels.

23.7. Demolishing brick work including stacking of serviceable materials and disposal of unserviceable materials etc. Wall

1.1. Earth work in excavation for foundation trenches of walls, relating walls, footing of column, steps septic tank etc. (A) Up to depth of 2m below the existing GL (a) In ordinary soil, Post, Wall

4.1.1. Providing brick soling in foundation and under floor with stone/best quality jhama brick sent pack etc. (a) Brick flat soling, Post, Wall

2.1.1. Plain cement concrete work with coarse agg. Of side 13mm to 32mm in foundation bed for 32mm in foundation bed for footing step wall etc. (a) In prop. 1:4:8, Post, Wall

2.1.3. Providing and laying 25mm thick damp roof course with Cement cncrete in prop. 1:1.5:3 etc.

18.1.1. Supplying fitting and fixing in position reinforcement bars conforming to relevant IS code etc. (b) Other ISI approved TMT reinforcement bar (SRMB/BISCON/X TECH) (For Assam Bldg, drain, boundary wall etc. 12mm dia, Post, T. Beam

( C) ISI approved M.S. Rod 6mm dia: Stirrup, Post, T. Beam

3.2.1. Providing from work of 12mm thick Plywood so as to give a rough finish incl. centering shuttering etc. 3.2.1.1. Column, pillars & Strut of square/rectangular etc.

3.1.1.2. Sides of tie beam, plinth beam, grade beam etc. T.Beam

2.2.1. Providing and laying plain/reinforced cement concrete work with coarse sand and 20mm down graded stone etc. (a) Using Mixer Machine (A) In substructure up to P.L. foundation, footing, column, base tie and plinth beam etc. (N) Without using admixture, plasticizer. (b) M 20 grade concrete or prop. 1:1.5:3

(B) In super structure from P.L. up to 1st floor level (ii) Column, pillar, posts, suspended floor roof etc. (N) Without using admixture, plasticizer. (b) M20 grade concrete or Prop. 1:1.5:3, Post

4.1.4. Brick work in cement mortar with 1st class brick including racking out joints and curings complete as directed. (I) In Sub-structure upto plinth level (b) In proportion 1:4, Wall

4.1.8. 112mm thick 1st class brick with 1st class brick incl. Racking out joints and curing complete above P.L. up to 1st floor level. (a) In prop. 1:4, Wall

6.2.2. 15mm thick cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level etc. (A) On rough side wall

13.2.3. (a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after thoroughly brooming the surface etc.

(b) Finishing wall with water proofing cement primaer of approved brand and manufacture of required shade on new wall surface (Two coats) to give an even shade etc.

Heavy Duty Iron Gate Double Leaf 1.1. Earth work in excavation for foundation trenches of walls, retaining wall, footing of columns, Pillars, septic tank etc. etc. complete A. Up to depth 2.00 m below the existing G.L. a) In ordinary soil. For Post

4.1.1. Providing brick soling in foundation and under floor with stone/best quality pick jhama brick, sand pack etc. (a) Brick flat soling, Post

2.2.1. Plain cement concrete work with coarse aggregate of size 13 mm to 32 mm in foundation bed for footing steps, walls etc. c) In Prop. 1:4:8 For Post

18.1.1. Supplying, fitting and fixing in position reinforcements bars conforming to relevant I.S. code ….. Etc. ii) Others ISI approved TMT reinforcement bar (SRMB/BISCON/X TECH) (For Assam Type Bldg. drain, boundary wall etc. 16 mm dia Post, Beam 12 mm dia Post, 10mm dia jali

(c ) ISI approved M.S. bar 6mm dia, post, Beam

3.2.1. Providing from work of 12mm thick plywood board so as to give a rough finish including centering , shuttering etc. complete. 3.2.1.1. Column, Pillars, Posts & Struts of square/rectangular etc. Post, Up to plinth Post

3.2.1.2. Sides tie beam, plinth beam, grade beam etc. For depth not exceeding 1.00M, Tie beam

2.2.1. Providing and laying plain/reinforcement cement concrete works With coarse sand 20mm down graded stone etc. (a) Using mixer machine A) In substrucure upto plinth level Foundation, footing, columns with base tie and plinth beam etc. N) Without using admixture, plasticiser. a) M20 Grade concrete or prop. 1:1.5:3, Footing, Irr, Post, Beam

(b) In super structure from P.L. upto 1st floor level ii) Column, Pillars, Post, struts, suspended floor, roof etc. a) M20 garde concrete in prop. 1:1.5:3 For Post-

4.1.4. Brick work in cement mortar with 1st classs brick including racking out joints and dewatering etc. (I) In sub-structure upto plinth level. B) In prop. 1:4

6.2.2. 15mm thick cement plaster in single coat on single or half brick/concrete wall for Interior plastering upto 1st floor level etc. (A) On rough side B) in prop. 1:4

13.2.3. a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after thoroughly brooming the surfaces etc.

b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade etc.

17.11. Providing fitting and fixing double leaf Iron Gate etc. complete Double leaf Gate size 3.64 X 1.90 =6.92 Single leaf Gate size 1.20 X 1.90 = 2.28

13.7.2. Applying primary coat over new Mattel and Mattel based Surface over 100mm in girth/ width after and incl. preparing the surface etc. (b) With ready mixed paint, matel primer (Pink)

13.7.4. Painting two coats (excluding priming coat) on new matel and matel based surface with enamel paint etc. (a) General purpose (Asian paint/Nerolac paint/J&N pait)

Earth filling 1.4. Raising low site around the Bldg. with approved soil obtained from outside by truck carriage including breaking clods dressing etc. (Deduction 12.5% for shrinkage) ii) Other than Guwahati Municipality Area..

Renovation of Office Building (No. 1) 23.12. Dismantling all types of corrugated/trapezoidal sheet Roofing including ridging, hips, valleys and gutter etc. For all level, Roof

23.15. Demolishing CC floor of verious thickness incl top layer and base course and disposal etc. Room

18.1.1. Supplying fitting and fixing in position reinforcement bars conforming to relevant IS code etc. (b) Other ISI approved TMT reinforcement bar (SRMB/BISCON/X TECH) (For Assam Bldg, drain, boundary wall etc. 8 mm dia, Chajja

3.2.1. Providing from work of 12mm thick Plywood Board so as to give a rough finish incl. centering shuttering etc. 3.2.1.3. Flat surface such as soffits of suspended floor, roof chajja, slab, etc. Floor etc. up to 200mm thickness, Chajja_

2.2.1. Providing and laying plain/reinforced cement concrete work with coarse sand and 20mm down graded stone etc. (I) Using Mixer Machine (B) In substructure from PL up to 1st floor level. (II) Columns, pillars, post, struts, suspended floor, Roof etc. (N) Without using admixture, plasticiser. (b) M 20 grade concrete or Prop. 1:1.5:3, Chajja

9.2.1. Providing undressed wood work in roof truss, rafter, purling Tie and the like incl. hosting in fixed position etc. (b) With Hollock/Sundi/Sam.

9.3.1. Providing wood work in frame in false ceiling protection etc. Swan wrough framed hosting and fixing in position with necessary bolts and nuts etc. (b) With Gamari/Bonsum/Sundi. Room

9.1.2. Providing wood work in frame (Showkath) of door, window, Clearstory window etc. (b) With 1st class timber (Bansum/Sundi)

8.1.35. Providing Pre Painted Galvanized Iron Sheet Roofing (Dyna roof/Satham/Durakolor/Century Wells) at all level etc. (v) 0.60mm thick.

8.1.36. Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges/Velley/Gitter/Finishing) (Dyna roof/Sathyam etc, (iv) 0.60mm thick

7.3.2. Providing and fixing wood plank ceiling with butt and lap joints including necessary nails and wood screws complete etc. (a) Hollock (25mm thick) Ceiling

9.4.1. Providing brage board of size 200mm X 20mm with 1st class local Hollokh/Bansum etc.

8.1.6. Providing 13mm mesh hexagonal wire made of one is designation (1mm dia) wire above post plate etc.

4.1.1. Providing soiling in foundation and under floor with stone/best quality Jhama bricks and packed etc. (a) Brick flat soiling Same Quantity as item No. 1/23. 15

5.1.4. 65mm thick cement concrete floor consisting of 50mm under Layer of cement concrete in prop 1:3:6 and 15mm thick wearing Layer in cement concrete in prop. 1:1:2 etc.

9.9.3. Providing fitting and fixing factory made wooden paneled door with panel inserts of 75mm to 50mm width and 12mm to 20 mm thickness etc. (b) With 1st class local wood (Hollokh/Gamari) (i) 40mm thick with panel inserts of 20mm thickness.

9.9.1. Providing fitting and fixing 1/2 paneled 2/3 glazed wooden shutter for doors/window, etc. © With Hollokh/Gamari (i) 40mm thick

6.2.2. 15mm thick cement plaster in single coat on rough side of brick/concrete walls for interior plastering up to 1st floor level etc. (A) On fair side. (b) in prop 1:4

19.2. Providing plinth protection with brick flat laid in Cement mortar 1:4 and finished with 15mm cement plaster in prop 1:2 with a floating coat of net cement finish etc.

19.5. Providing drain with brick work in cement mortar in prop. 1:5 with half brick thick side walls and 100mm thick CC (1:3:6) base over one brick flat soling incl. 15mm cement plastering etc.

16.1. Providing and fixing clear sheet glass bedded in putty and fixed with/ without wooden bedding etc. (i) Area of glass panes not existing 0.15 m2 (c ) 3.00mm thick

15.2.1. Supplying, fitting, fixing anodized aluminum fittings Approved make, seasonably smooth, free from sharp Edges and corners with counter sunk holes for screws etc. (a) Sliding door bolt (i) 300mm X 16mm

(b) Tower bolts (ii) 250mm X 12mm

(c ) Door handles (iii) 150mm

13.4.7. Wall painting (two coats) with plastic emulsion paint Approved brand and manufacture (Asian paint/Berger Paint/ICI paint/J&N paint/Nerolac) on new surface to give an even shade etc. (a) Plastic emulsion paint Approved brand and manufacture (Asian paint/Berger Paint/ICI paint/J&N paint/Nerolac) Wall

13.9.1. Finishing old/new wall with waterproofing weather coat Smooth anti-funfal exterior painting of Apex brand of Asian paints of required shade etc. Wall

13.6.3. Applying primary coat over new wood and wood based Surface over 100mm in grith/width after and incl. preparing the surface etc. (b) With ready mixed paint, wood primer (Pink) Chowkath, Shutter, Ceiling

13.6.5. Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint etc. (a) General Purpose (Asian paint/Nerolac paint/J&N paint)

Renovation of Office Building (No. - II) 23.15. Demolishing CC floor of various thickness incl top layers and base course and disposal etc. Room

9.3.1. Providing wood work in frame in false ceiling protection etc. Swan wrough framed hosting and fixing in position with necessary bolts and nuts etc. (b) With Gamari/Bonsum/Sundi. Room

7.3.2. Providing and fixing wood plank ceiling with butt and lap joints including necessary nails and wood screws complete etc. (a) Hollock (25mm thick) Ceiling

9.4.1. Providing brage board of size 200mm X 20mm with 1st class local Hollokh/Bansum etc.

8.1.6. Providing 13mm mesh hexagonal wire made of one is designation (1mm dia) wire above post plate etc.

4.1.1. Providing soiling in foundation and under floor with stone/best quality Jhama bricks and packed etc. (a) Brick flat soiling

5.1.4. 65mm thick cement concrete floor consisting of 50mm under Layer of cement concrete in prop 1:3:6 and 15mm thick wearing Layers in cement concrete in prop 1:1:2 etc.

6.2.2. 15mm thick cement plaster in single coat on rough side of brick/concrete walls for interior plastering up to 1st floor level etc. (A) On fair side. (b) in prop 1:4

9.1.2. Providing wood work in frame (Showkath) of door, window, Clearstory window etc. (b) With 1st class timber (Bansum/Sundi)

9.9.3. Providing fitting and fixing factory made wooden paneled door with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness etc. (b) With 1st class local wood (Hollokh/Gamari) (i) 40mm thick with panel inserts of 20mm thickness.

9.9.7. Providing fitting and fixing fully glazed window with sash bars including oxidized M.S. butt hinges etc. (c ) With Hollokh/Bansun (i) 40mm thick

16.1. Providing and fixing clear sheet glass bedded in putty and fixed with/ without wooden bedding etc. (i) Area of glass panes not existing 0.15 m2 (c ) 3.00mm thick

15.2.1. Supplying, fitting, fixing anodized aluminum fittings Approved make, seasonably smooth, free from sharp Edges and corners with counter sunk holes for screws etc. (a) Sliding door bolt (i) 300mm X 16mm

(b) Tower bolts (ii). 250mm X 12mm

(c ) Door handles (iii) 150mm

19.2. Providing plinth protection with brick flat laid in Cement mortar 1:4 and finished with 15mm cement plaster in prop 1:2 with a floating coat of net cement finish etc.

19.5. Providing drain with brick work in cement mortar in prop. 1:5 with half brick thick side walls and 100mm thick CC (1:3:6) base over one brick flat soling incl. 15mm cement plastering etc.

13.4.7. Wall painting (two coats) with plastic emulsion paint Approved brand and manufacture (Asian paint/Berger Paint/ICI paint/J&N paint/Nerolac) on new surface to give an even shade etc. (a) Plastic emulsion paint Approved brand and manufacture (Asian paint/Berger Paint/ICI paint/J&N paint/Nerolac) Wall

13.9.1. Finishing old/new wall with waterproofing weather coat Smooth anti-funfal exterior painting of Apex brand of Asian paints of required shade etc. Wall

13.6.3. Applying primary coat over new wood and wood based Surface over 100mm in grith/width after and incl. preparing the surface etc. (b) With ready mixed paint, wood primer (Pink) Chowkath, Shutter, Ceiling

13.6.5. Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint etc. (a) General Purpose (Asian paint/Nerolac paint/J&N paint)

Renovation of Godown Building (No. -1) 23.12. Dismantling all types of corrugated/trapezoidal sheet Roofing including ridging, hips, valleys and gutter etc. for all level.

23.15. Demolishing CC floor of verious thickness incl top layer and base course and disposal etc. Room

1.1. Earth work in excavation for foundation trenches of walls, relating walls, footing of column, steps septic tank etc. (A) Up to depth of 2m below the existing GL (a) In ordinary soil, Post, Wall

4.1.1. Providing soiling in foundation and under floor with stone/best quality Jhama bricks and packed etc. (a) Brick flat soiling Post, Room

2.1.1. Plain cement concrete work with coarse agg. Of side 13mm to 32mm in foundation bed for flooring step wall etc. (a) In prop. 1:3:6, Post,

18.1.1. Supplying fitting and fixing in position reinforcement bars Conforming to relevant IS code etc. (b) Other ISI approved T.M.T. reinforcement bar (SRMB/BISCON/ X TECH) (For Assam Type Bldg, drain, boundary wall etc 16mm dia

3.2.1. Providing from work of 2mm thick Plywood Board so as to give a rough finish incl. centering shuttering etc. 3.2.1.1. Column, pillars, posts & strut of square/rectangular etc., Base, Post

2.2.1. Providing and laying plain/reinforced cement concrete work with coarse sand and 20mm down graded stone etc. (a) In substructure up to P.L. Foundation, footing, column with base tie and plinth beam etc. (b) M 20 or in prop. 1:1.5:3

(B) M 29 grade concrete or Prop. 1:1.5:3

4.1.8. 1st class brick nogged wall in cement mortar including racking out joint and curing complete above PL up to 1st floor level. (A) 112mm thick brick wall (a) In prop. 1:4

9.2.1. Providing undressed wood work in roof truss, rafter, purling Tie and the like incl. hosting in fixed position etc. (b) With Hollock/Sundi/Sam.

8.1.1. Providing corrugated galved Iron sheet roofing of TATA Shaktee/SAIL incl. fitting and fixing necessary Galved etc. (D) 0.63mm thick

9.4.1. Providing brage board of size 200mm X 20mm with 1st class local Hollokh/Bansum etc.

5.1.4. 65mm thick cement concrete floor consisting of 50mm under Layer of cement concrete in prop 1:3:6 and 15mm thick wearing Layers in cement concrete in prop 1:1:2 etc.

18.4.2. Providing and fitting rolling shutter of approved make made of 80mm wide M.S. laths interlocked together through their entire length etc.

6.2.2. 15mm thick cement plaster in single coat on rough side of brick/concrete walls for interior plastering up to 1st floor level etc. (A) On fair side. (b) in prop 1:4

13.4.7. Wall painting (two coats) with plastic emulsion paint Approved brand and manufacture (Asian paint/Berger Paint/ICI paint/J&N paint/Nerolac) on new surface to give an even shade etc. (a) Plastic emulsion paint Approved brand and manufacture (Asian paint/Berger Paint/ICI paint/J&N paint/Nerolac) Wall

13.9.1. Finishing old/new wall with waterproofing weather coat Smooth anti-funfal exterior painting of Apex brand of Asian paints of required shade etc. Wall

13.6.3. Applying primary coat over new wood and wood based Surface over 100mm in grith/width after and incl. preparing the surface etc. (b) With ready mixed paint, wood primer (Pink).

13.6.5. Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint etc. (a) General Purpose (Asian paint/Nerolac paint/J&N paint)

13.7.2. Applying primary coat over new Mattel and Mattel based Surface over 100mm in girth/ width after and incl. preparing the surface etc. (b) With ready mixed "red-lead/red oxide"primer.

13.7.4. Painting two coats (excluding priming coat) on new matel and matel based surface with enamel paint etc. (a) General purpose (Asian paint/Nerolac paint/J&N pait)

Renovation of Godown Building. (No.- II) 23.12. Dismantling all types of corrugated/trapezoidal sheet Roofing including ridging hips, valleys and gutter etc. for all level.

23.15. Demolishing CC floor of verious thickness incl top layer and base course and disposal etc. Room

9.2.1. Providing undressed wood work in roof truss, rafter, purling Tie and the like incl. hosting in fixed position etc. (b) With Hollock/Sundi/Sam.

9.3.1. Providing wood work in frame in false ceiling protection etc. Swan wrough framed hosting and fixing in position with necessary bolts and nuts etc. (b) With Gamari/Bonsum/Sundi. Room

8.1.35. Providing Pre Painted Galvanized Iron Sheet Roofing (Dyna roof/Satham/Durakolor/Century Wells) at all level etc. (v) 0.60mm thick.

8.1.36. Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges/Velley/Gitter/Finishing) (Dyna roof/Sathyam etc, (iv) 0.60mm thick

7.9.1. Providing fitting and fitting in hard board sheet ceiling with approved quality with necessary nails, wood screws etc. (C ) 6 mm thick

9.4.1. Providing brage board of size 200mm X 20mm with 1st class local Hollokh/Bansum etc.

8.1.6. Providing 13mm mesh hexagonal wire made of one is designation (1mm dia) wire above post plate etc.

4.1.1. Providing soiling in foundation and under floor with stone/best quality Jhama bricks and packed etc. (a) Brick flat soiling, Room

5.1.4. 65mm thick cement concrete floor consisting of 50mm under Layer of cement concrete in prop 1:3:6 and 15mm thick wearing Layers in cement concrete in prop 1:1:2 etc.

6.2.2. 15mm thick cement plaster in single coat on rough side of brick/concrete walls for interior plastering up to 1st floor level etc. (A) On fair side. (b) in prop 1:4

18.4.2. Providing and fitting rolling shutter of approved make made of 80mm wide M.S. laths interlocked together through their entire length etc.

13.4.7. Wall painting (two coats) with plastic emulsion paint Approved brand and manufacture (Asian paint/Berger Paint/ICI paint/J&N paint/Nerolac) on new surface to give an even shade etc. (a) Plastic emulsion paint Approved brand and manufacture (Asian paint/Berger Paint/ ICI paint/J&N paint/Nerolac) Wall

13.9.1. Finishing old/new wall with waterproofing weather coat Smooth anti-funfal exterior painting of Apex brand of Asian paints of required shade etc. Wall

13.6.3. Applying primary coat over new wood and wood based surface over 100mm in grith/width after and incl. preparing the surface etc. (b) With ready mixed paint, wood primer (Pink)

13.6.5. Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint etc. (a) General Purpose (Asian paint/Nerolac paint/J&N paint)

13.7.2. Applying primary coat over new Mattel and Mattel based surface over 100mm in girth/width after and including prearing the surface. (b) With ready mixed "red-lead/red oxide" primer. Door Shutter

13.7.4. Painting two coats (excluding priming coat) on new matel and matel based surface with enamel paint etc. (a) General purpose (Asian paint/Nerolac paint/J&N pait) Door Shutter

Renovation of Quarter. 23.15. Demolishing CC floor of various thickness incl. top layer and based course and disposal etc. Room

9.3.1. Providing wood work in frame in false ceiling protection etc. Swan wrough framed hosting and fixing in position with necessary bolts and nuts etc. (b) With Gamari/Bonsum/Sundi. Room

9.1.2. Providing wood work in frame (Showkath) of door, window, Clearstory window etc. (b) With 1st class timber (Bansum/Sundi)

7.9.1. Providing fitting and fitting in hard board sheet ceiling with approved quality with necessary nails, wood screws etc. (C ) 6 mm thick Ceiling

9.4.1. Providing brage board of size 200mm X 20mm with 1st class local Hollokh/Bansum etc.

4.1.1. Providing soiling in foundation and under floor with stone/best quality Jhama bricks and packed etc. (a) Brick flat soiling

5.1.4. 65mm thick cement concrete floor consisting of 50mm under Layer of cement concrete in prop 1:3:6 and 15mm thick wearing Layers in cement concrete in prop 1:1:2 etc.

9.9.3. Providing fitting and fixing factory made wooden paneled door with panel inserts of 75mm to 50mm width and 12mm to 20 mm thickness etc. (b) With 1st class local wood (Hollokh/Gamari) (i) 40mm thick with panel inserts of 20mm thickness.

9.9.7. Providing fitting and fixing fully glazed window with sash bars including oxidized M.S. butt hinges etc. (c ) With Hollokh/Bansun (i) 40mm thick

6.2.2. 15mm thick cement plaster in single coat on rough side of brick/concrete walls for interior plastering up to 1st floor level etc. (A) On fair side. (b) in prop 1:4

5.7.1.1. Providing ceramic Tiles of approved quality, size, shape and thickness not less then 8mm on floor, skirting etc. (b) Executive range (Somany/Orient/Nitco/Asian make) (ii) Of size 400mm X 400mm and above

5.7.1.2. Providing ceramic Tiles of approved quality, size, shape and thickness not less than 8mm on wall, skirting etc. (b) Executive range (Somany/Orient/Nitco/Asian make) (ii) Of size 250mm X 350mm and above). Wall Tiles

19.2. Providing plinth protection with brick flat laid in Cement mortar 1:4 and finished with 15mm cement plaster in prop 1:2 with a floating coat of net cement finish etc.

19.5. Providing drain with brick work in cement mortar in prop. 1:5 with half brick thick side walls and 100mm thick CC (1:3:6) base over one brick flat soling incl. 15mm cement plastering etc.

16.1. Providing and fixing clear sheet glass bedded in putty and fixed with/ without wooden bedding etc. (i) Area of glass panes not existing 0.15 m2 (c ) 3.00mm thick

15.2.1. Supplying, fitting, fixing anodized aluminum fittings Approved make, seasonably smooth, free from sharp Edges and corners with counter sunk holes for screws etc. (a) Sliding door bolt (i) 300mm X 16mm

(b) Tower bolts (ii) 250mm X 12mm

(c ) Door handles (iii) 150mm

13.4.7. Wall painting (two coats) with plastic emulsion paint Approved brand and manufacture (Asian paint/Berger Paint/ICI paint/J&N paint/Nerolac) on new surface to give an even shade etc. (a) Plastic emulsion paint Approved brand and manufacture (Asian paint/Berger Paint/ICI paint/ J&N paint/Nerolac)

13.9.1. Finishing old/new wall with waterproofing weather coat Smooth anti-funfal exterior painting of Apex brand of Asian paints of required shade etc. Wall

13.6.3. Applying primary coat over new wood and wood based surface over 100mm in grith/width after and incl. preparing the surface etc. (b) With ready mixed paint, wood primer (Pink)

13.6.5. Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint etc. (a) General Purpose (Asian paint/Nerolac paint/J&N paint)

SEPTIC TANK (40 User) 1.1. Earth work in excavation for foundation trenches of walls relating walls, footing of column, steps septic tank etc. (A) Up to a depth of 2m below the existing G.L. (a) In ordinary soil.

4.1.1. Providing soiling in foundation and under floor with stone/best quality Jhama bricks and packed etc. (a) Brick flat soiling

2.1.1. Plain cement concrete work with coarse agg. Of size 13mm to 32mm in foundation bed for flooring step wall etc. (b) In prop. 1:3:6

18.1.1. Supplying fitting and fixing in position reinforcement bars conforming to relevant IS code etc. (a) Other ISI approved T.M.T. reinforcement bar (SRMB/BISCON/ X TECH) (For Assam Type Bldg. Drain B. Wall etc.)

3.2.1. Providing from work of 2mm thick Plywood Board so as to give a rough finish incl. centering shuttering etc. 3.2.1.1. Column, pillars, posts & strut of square/rectangular etc.

2. Sides of tie beam, plinth beam, grade beam etc.

4.14. Brick work in cement mortar with 1st class brick incl. raking out joints and dewatering in sub structure. (b) In prop. 1:4

2.2.1. Providing and laying plaint/reinforced cement concrete work with coarse sand and 20mm down graded stone etc. (a) In substructure up to P.L. foundation, footing, column with base tie and plinth beam etc. (a) M 20 of prop. 1:1.5:3

6.2.2. 15mm thick cement plaster in single coat on rough side of brick/concrete walls for interior plastering up to 1st floor level etc. (a) in prop 1:3

25.12. Providing precast RCC slab in prop. 1:2:4 reinforced with 10mm TMT/HYSD bars @ 150mm cement both ways tying with 20 gauge black annealed etc.

B. SANITARY FITTINGS 1.37.5. Providing fitting and fixing plinth single tee of (Supreme/Prince) or other ISI approved etc. (b) Concealed by sheselling or braking brick wall etc. (ii) 100mm dia

1.48. Providing fitting and fixing 150mm dia 90mm thick CI manhole covered frame of 25kg weight etc.

SANITARY & WATER SUPPLY 1.1.3. Providing fitting and fixing white vitreous water closet squatting pan (Indian type pattern) of size 580 X 240mm with 100mm SCI 'P' or 'S' Trap of Parryware/Hindware etc. (a) White.

1.37.1. Supplying, fitting and fixing PVC pipes of 6 kg/cm2 (Supreme/Prince) or other ISI approved including Joining, fitting and fixing with clamps etc. (a) In exposed surface or in trenches. (ii) 110mm dia.

(iv) 75mm dia

1.37.2. Supplying, fitting and fixing 87.5 degress PVC bend of (Supreme/Prince) or other ISI approved including Joining,fitting and fixing with clamps etc. (a) In exposed surface or in trenches. (ii) 110mm dia.

(iv) 75mm dia

1.37.6. Supplying, fitting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including Joining, fitting and fixing clamps etc. (b) Concealed by chiseling or breaking brick wall/CC/ RCC/and making good to the damages. (ii) 110mm dia.

1.37.14. Supplying, fitting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including Joining, fitting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including Joining, fitting and fixing with clamps etc. (a) In exposed surface or in trenches. (iv) 110mm X 75mm

1.39.3. Providing, fitting and fixing 75mm dia. PVC cowel of ISI make complete as directed and specified.

1.52. Construction of inspection pit inside measurement 450mm X 450mm X 450mm flush with 100mm dia. HCI/PVC pipes and cement concrete base in prop. 1:3:6 over flat brick soiling etc.

1.51. Construction of filter bed in soak pit including earth work in excavation of soil and then fitting up of the Trench with brick bats/charcoal with earth over a Layer of A.C. plain sheet etc.

5.1.1. Supplying, fitting and fixing pipes with all necessary fitting in exposed or in trenches etc. (A) G.I. Pipes with G.I. fittings (a) TATA/SAIL (Medium) 40mm dia

5.3.8. Supplying fitting and fixing brass Tez filter 2.00m long.

5.3.1. Labour for sinking tube well with 40mm (internal) dia G.I. pipes up to havings strata, having etc.

5.3.2. Supplying fitting and fixing maya Hanf Pump No. 6 For 40mm dia Tube Well etc. (ii) Mayur

Providing of Tube Well Platform with brick work, CC works Plastering etc.

Construction of Out side Latrine and Urinal. 1.1. Earth work in ecavation for foundation trenches of walls, relating walls, footing of column, steps septic tank etc. (A) Up to a depth of 2m below the existing G.L. (a) In ordianary soil. Post, Wall

4.1.1. Providing soiling in foundation and under floor with stone/best quality Jhama bricks and packed etc. ( c) Brick flat soiling. Post. Wall

2.1.1. Plain cement concrete work with coarse agg. Of size 13mm to 32mm in foundation bed for flooring step wall etc. (b) In prop. 1:4:8

18.1.1. Supplying fitting and fixing in position reinforcement bars Conforming to relevant IS code etc. (a) form Primary producer: TATA/SAIL/JINDAL steel/Shyam steel/RINL (ii) Super ductile (SD) TMT reinforcement bar. 12mm dia, Post, 10mm dia Jali, Linter

( C) ISI approved M.S. Rod 6mm dia: Post, T. Beam, Lintel

3.2.1. Providing from work of 12mm thick Plywood Board so as to give a rough finish incl. centering shuttering etc. 3.2.1.1. Column, pillars, posts & strut of square/rectangular etc. Base, Post

3.1.1.2. Sides and soallits of beam, beam, hanching cantilever etc. Lintel etc.

2.2.1. Providing and laing plain/reinforcement cement concrete work with coarse sand and 20mm down graded stone etc. (I) Using Mixer Machine. (a) In substructure up to P.L. foundation, footing, column with base tie and plinth beam etc. (N) Without using admixture, plasticiser. (A) M15 grade concrete or Prop. 1:2:4

(B) In super structure from P.L. up to 1st floor level (ii) Column, pillar, posts, suspended floor roof etc. (A) M15 grade concrete or Prop. 1:2:4 Post

4.1.4. Brick work in cement mortar with 1st class brick including racking out joints and dewatering etc. (I) In Sub-structure upto plinth level (b) In proportion 1:4, Wall

1.3. Earth/sand filling in plinth in layers not more than `150mm Thick including necessary carriage watering, ramming etc. (A) With silt (Predominantly non plastic) by thick curing including loading and unloading.

2.1.3. Providing and laying 25mm thick damp roof course with Cement cncrete in prop. 1:1.5:3 etc.

4.1.8. 1st class brick nogged wall in cement mortar including racking out joint and curing complete above PL up to 1st floor level. (A) 112mm thick brick wall (a) In prop. 1:4

18.7.2. Providing fitting and fixing powder coated pressed door frame made of 1.25mm/1.6mm thick sheet of verious size etc. (a) 1.25mm thick sheet. (iii) Size 125mm X 60mm (Single rebate)

18.3.1. Providing fitting. Hosting and fixing of roof trust incl. Purlin fabricated out of MS black tube conforming to relevant IS code as per approved design etc. 50mm dia.

8.1.1. Providing corrugated galved Iron sheet roofing of TATA Shaktee/SAIL incl. fitting and fixing necessary Galved etc. (D) 0.63mm thick

9.4.1. Providing brage board of size 200mm X 20mm with 1st class local Hollokh/Bansum etc.

6.2.3. 15mm thick cement plaster in single coat on rough side of Brick/concrete walls for interior plastering up to 1st floor level etc. (a) In prop. 1:4

5.1.4. 65mm thick cement concrete floor consisting of 50mm under Layer of cement concrete in prop 1:3:6 and 15mm thick wearing Layers in cement concrete in prop 1:1:2 etc.

9.12.1. Providing fitting and fixing flush door shutter solid core construction with frame of 1st class hard wood with cross band and face nonccred ply wood face etc. (b) Non decorative type and block board core. (i) 40mm thick.

15.2.1. Supplying, fitting, fixing anodized aluminum fittings Approved make, seasonably smooth, free from sharp Edges and corners with counter sunk holes for screws etc. (a) Sliding door bolt (i) 300mm X 16mm

(b) Tower bolts (ii) 250mm X 12mm

(c ) Door handles (iii) 150mm

19.2. Providing plinth protection with brick flat laid in Cement mortar 1:4 and finished with 15mm cement plaster in prop 1:2 with a floating coat of net cement finish etc.

19.5. Providing drain with brick work in cement mortar in prop. 1:5 with half brick thick side walls and 100mm thick CC (1:3:6) base over one brick flat soling incl. 15mm cement plastering etc.

13.2.1. (a) Colour washing with lime on wall surfaces (two coat) over and including a priming coat of white washing etc. Wall

13.6.3. Applying primary coat over new wood and wood based surface over 100mm in grith/width after and incl. preparing the surface etc. (b) With ready mixed paint, wood primer (Pink)

13.6.5. Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint etc. (a) General Purpose (Asian paint/Nerolac paint/J&N paint)

SEPTIC TANK (40 User) 1.1. Earth work in excavation for foundation trenches of walls relating walls, footing of column, steps septic tank etc. (A) Up to a depth of 2m below the existing G.L. (a) In ordinary soil.

4.1.1. Providing soiling in foundation and under floor with stone/best quality Jhama bricks and packed etc. (a) Brick flat soiling

2.1.1. Plain cement concrete work with coarse agg. Of size 13mm to 32mm in foundation bed for flooring step wall etc. (b) In prop. 1:3:6

18.1.1. Supplying fitting and fixing in position reinforcement bars conforming to relevant IS code etc. (a) Other ISI approved T.M.T. reinforcement bar (SRMB/BISCON/ X TECH) (For Assam Type Bldg. Drain B. Wall etc.)

3.2.1. Providing from work of 2mm thick Plywood Board so as to give a rough finish incl. centering shuttering etc. 3.2.1.1. Column, pillars, posts & strut of square/rectangular etc.

2. Sides of tie beam, plinth beam, grade beam etc.

4.14. Brick work in cement mortar with 1st class brick incl. raking out joints and dewatering in sub structure. (b) In prop. 1:4

2.2.1. Providing and laying plaint/reinforced cement concrete work with coarse sand and 20mm down graded stone etc. (a) In substructure up to P.L. foundation, footing, column with base tie and plinth beam etc. (a) M 20 of prop. 1:1.5:3

6.2.2. 15mm thick cement plaster in single coat on rough side of brick/concrete walls for interior plastering up to 1st floor level etc. (a) in prop 1:3

25.12. Providing precast RCC slab in prop. 1:2:4 reinforced with 10mm TMT/HYSD bars @ 150mm cement both ways tying with 20 gauge black annealed etc.

B. SANITARY FITTINGS 1.37.5. Providing fitting and fixing plinth single tee of (Supreme/Prince) or other ISI approved etc. (b) Concealed by sheselling or braking brick wall etc. (ii) 100mm dia

1.48. Providing fitting and fixing 150mm dia 90mm thick CI manhole covered frame of 25kg weight etc.

SANITARY FITTINGS & WATER SUPPLY 1.13.1. Providing vitreaus china wash basin of size 630mm X 450mm of Parry Ware make with CI/MS brackets etc. (a) Coloured China wash basin of size 630mm X 450mm

1.1.3. Providing fitting and fixing white vitreous water Closet squatting pan (Indian type pattern) of size 580 X 240 mm with 100mm SCI 'P' or 'S'Trap of Parryware/Hindware etc.

1.37.1. Supplying, fitting and fixing PVC pipes of 6 kg/cm2 (Supreme/Prince) or other ISI approved including Joining, fitting and fixing with clamps etc. (a) In exposed surface or in trenches. (ii) 110mm dia.

(iv) 75mm dia

1.37.2. Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including Joining,fitting and fixing with clamps etc. (b) In exposed surfaces or in trenches. (ii) 110mm dia

(iv) 75mm dia

1.37.6. Supplying, fitting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including Joining, fitting and fixing clamps etc. (b) Concealed by chiseling or breaking brick wall/CC/ RCC/and making good to the damages. (ii) 110mm dia.

1.37.14. Supplying, fitting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including Joining, fitting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including Joining, fitting and fixing with clamps etc. (a) In exposed surfaces or in trenches. (iv) 110mm X 75mm

1.39. Providing, fitting and fixing PVC cowel of ISI make complete as directed and specified. (iv) 75mm dia. PVC cowel of ISI make.

1.51. Construction of filter bed in soak pit including earth work in excavation of soil and then fitting up of the Trench with brick bats/charcoal with earth over a Layer of A.C. plain sheet etc.

3.1.1. Supplying, fitting and fixing G.I. Pipes of followings with all necessary 'R' brand similar approved etc. (ii) Conceld by chiseling or breaking brick wall CC wall/RCC wall and making etc. (c ) 32mm dia (Medium) (i) Using Tata make

(f) 15mm dia (Medium) (i) Using TATA make.

3.3.1. Supplying, fitting and fixing C.P. bib-cock 15mm dia of approved brand as directed etc. (i) Essco make (Delux/Sumthingspl./Tropical) (a) Bib cook short body

Approach Road (Earth work with RCC pavement. 30.1. Construction of sub-grade and earthen shoulder with approved materials obtained from borrow pits, with all lifts & lead etc. (a) Form Parivate land. (1) Total length Road= 31.00m

30.4. Providing from work ordinary timber planking so as to give A rough finish incl. centering, shuttering etc. (ii) Using 25mm thick plank

30.2. Construction of granular sub-base by providing close graded material spteading in uniform layers with motor grader on prepared surface etc. (with an initial lead of 5km) (b) Using Grading II material.

30.3. Supplying fitting and fixing in position reinforcement bars conforming to relevant I.S. code etc. (a) other ISI approved.

30.5. Providing and laying controlled cement concrete pavement of approved grade with 20mm down graded stone etc. (a) M 20 grade Concrete

30.6. 15mm tick cement plaster in single coat with hardener of Recron/Degusa/Fosros on brick/concrete for plastering including arises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm in girth and finished etc. (a) in prop. 1.3

ELECTRICAL WORK 1.1. Wiring for light /fan/call bell point with 2X1.5 Sq. mm PVC insulated single core unsheathed industrial (Multistand) cable FR conforming to IS-694 : 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 Volts (Finolex/RR cable/ Nicco/Anchor or Equivalent Make as approved by the Deptt.) with flat 19mm ISI marked casing "n" capping (AKG/Precision/Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type switch/ bell push (Anchore penta/Gold medal/Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) Gl/MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover, ceiling rose (Anchor/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete as directed and specified by the Deptt. Short point up to 3.00 metre length

Medium point up to 6.00 metre length

Long point up to 10.00 metre length.

1.8 Wiring for drawing sub-main line with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Cable/Nicco/Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing "n" capping (AKG/Precision/Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) system including earth continuity. With 2 X 2.5 sq. mm. + earth continuity with 1X1.5 sq. mm. in flat 19 mm ISI marked casing "n" capping system.

2.10. Wiring for 5 pin 6 amp plug with 1.5 sq mm PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS- 694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR cable/ Nicco/Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta/Gold medal/Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) make and 6 amp flush type switch (Anchor penta/Gold medal/Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) make earthing the 3rd pin of the socket as required on the switch board in surface/recessed P.V.C. conduit wiring system. When fitted on same board of light and fan.

Supplying and fixing of batten holder (Anchor Penta PC CHERRY/Gold medal/Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) including connection as approved by the Deptt.) as required without Lamp.

11.17, Supplying and fixing of bulk head fitting suitable for CFL lamp complete with all accessories including 20 watts CFL lamp and connection as approved by the Deptt.) as required.

11.26. Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified as directed by the deptt.

15.1. Supplying with fitting and fixing sheet steel, phosphatised, powder painted single door surface mounting MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitting on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved , specified and directed by the deptt. 4 way SPN single door.

16.1. Supplying with fitting and fixing single pole 10 KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as approved specified and directed by the deptt. C Series (Schneider MG, legrand, Hager make) 6 to 32A

16.3. Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 6 to 32 A

22.7. Supply, installation & testing of G.I earth station with perforated 40mm dia and 4.50 Metre long heavy duty G.I. pipe with necessary 40 mm dia G.I. Fittings such as Socket, Tee elbow, nipple and 50mm X 40mm G.I. reducing socket for funnel including locking arrangement 300mm X 300mm X 6mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & Outer surface of wall as specified and directed

22.12. Extra for using salt (5 K and Charcoal 64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

22.16. Supplying & laying of 8 SWG Copper earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

27.1. Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of sweeps with making necessary connection as approved by the Deptt. As required complete and as directed by the Deptt. (without regulator). Premium model 1200mm sweep (ORIENT PSPO make)/Premium model 1050/1200mm sweep SS-390 Deco Havells make)

LANKESWAR RABHA

Madan Debnath