SE(FAWS)/W and S/KMDA/T-03(3rd Call) of 2025-26

Construction of fixed type Intake jetty of Capacity 15 MGD for facilitating erection of suction assembly, accommodating pumping machinery, working bay and also act as marine protection to the pump and other assemblies etc in tidal rivers supported on piles of appropriate size with appropriate design depth and Pile diameter all complete as per the Standard specification , Vetted Design & Drawing. Jetty head = 25 m x 15 m (minimum) Gangway = 28 m x 12 m (Minimum) ( The dimesion may Change according to KoPT(SMPK) report. So rate will be quoted accordingly.No extra payment will be made.

Construction of Pump House and Sub-Station building for 15 MGD Capacity Intake Jetty with Panel room , Battery room , Switch room & Cable trench all Complete as per the Standard specification , Vetted Design & Drawing.

Hydro-graphic Survey, feasibility study , River Bank Protection Work etc as per the Standard Design & specification

Construction of Boundary Wall , approach road , MS Ornamental Gate , internal Service road , drain , land Development , Pipelines etc all Complete as per the Standard specification and rest of the Civil work all complete.

Defect Liability with Civil O&M Work for 36 months all complete after Commissioning.

Design, Supply ,installation, testing & commissioning of V. T. Pump having a head discharge characteristic of 1700m³/hr with new column pipes, shafts, sleeves, guide head range of (26-29) M (finalised during detail engineering & Design) along spiders, discharge head, motor stool, column pipe, Caison Pipe, pressure gauge, air release valve etc. total complete as required as per site condition. Over head tank and piping for lubrication to be provided if required. Considered Pump speed 1000 rpm (syn).

Design, Supply, installation, testing & commissioning of 200 KW (finalised during detail engineering and Design) 0.415KV,50Hz,TFEC,SCIM,class F insulation, temp rise restricted to Class-B,V1, IE 2 , pump duty motor, all complete with 6 nos.RTD & 2 no. BTD. Considered Motor speed 1000 rpm (syn).

Supply, installation, testing & commissioning of LT PDB cum MCC with all accessories like ACBs, MCCB, Star Delta Starters, along with all meters, instruments, termination as required all complete at RWPS.

Supply, installation, testing & commissioning of the NRV of 500 mm size as required.

Supply, installation, testing & commissioning of the Electrical Operated BFV of 500 mm size as required

Supply, installation, testing & commissioning of the Electrical Operated BFV of 700mm size as required

Supply, installation, testing & commissioning of MS Dismantling joint, of 500 mm size as required.

Supply, installation, testing & commissioning of MS Dismantling joint of 700 mm size as required.

Supply, installation of double flanged MS pipes of 500 mm & 700 mm size to complete the delivery piping and common manifold as required including MS reducer, enlarger, specials of suitable size for all the Pumps

Supply, installation, testing & commissioning of transformer of 1000 KVA rating 6 KV/0.433KV ONAN, OFF Load tap changing transformer, with vector group Dyn 11. as per IS 1180 & 2026, Lev 1 and as per specification transformers. This has to be installed on proper foundation or on pole/floor with proper fencing baffle wall as required as per site condition.

Supply, installation, testing & commissioning of 4 Panel H.T. (6.0 KV) Switch Gear as per tachnical specificarion and Direction of the EIC including dismantaling of existing, old HT panel

Supply, installation, testing & commissioning of 3 Panel H.T. (6.0 KV) Switch Gear as per tachnical specificarion and Direction of the EIC

Supply, installation, testing of all HT/LT power, control and signal cables as required to complete the entire pumping station for commissioning along with termination kits, and pipe protections, as per technical specificatiobn and requirement etc.

Extra Length for drawing H.T. Power Supply from the existing Sub-Station to the Proposed Sub-Station at Intake Jetty approximately 800 m apart by 3C, 300 sq.mm. XLPE armoured, Al, 11 K.V. Cable.

Supply, installation, testing & commissioning of internal and outside wiring and illumination system complete with switch boards, switches, MCBs, DB, light fittings, fans, exhaust fans, plug points, wire of required size & length, power plugs, GI poles etc. as required for proper illumination at Pump house and Sub Station.

Supply, delivery and installation and testing & commissioning of Full Bore electromagnetic type Flow meter 0f 700 dia., Recorder, Totaliser as per specification and technical offer.

Supply, installation, testing & commissioning of earthing system of both HT & LT side of required rating and quantity.

Supply, installation, testing & commissioning of fire extinguishers along with sand buckets as required.

Supply of rubber mat, hand gloves, shock treatment chart etc.

Supply, installation, testing & commissioning of 7.5 MT capacity double girder EOT crane

Supply Installation & Testing of Pressure Transmitter

Supply Installation & Testing of Pressure Gauge for individual and common manifold (0-10) Kg/cm2 .

Supply, delivery, installation of M.S. Structural materials with GI cable tray /rack for panel installation supports, pipes & valves supports, fabricated stairs & all other work including tray for cable laying to complete all.

Supply Installation & Testing of 110 V DC, 100 AH with 55 cells sealed maintenance free battery with float and boost battery charger cum DCDB as per specification. (one for proposed new RWPS & One for existing old RWPS)

Supply, installation testing & commissioning of Radar type level indicator with allied system

Supply, installation testing & commissioning of Exhaust Fan with Crowl, LED Signage all complete for pump house and Sub Station .

Supply, installation, testing & commissioning of lighting arrestor of required rating for pump house and Sub Station .

HT voltage test of the entire installation along with clearance from the DOE, Govt. of W.B. including cost of requisite fees and inclusive of charges of required construction power.

Testing, Trial run, commissioning cum operation maintenance of the entire system for 72 Hrs to achieve the desired objective, etc.