Comprehensive operation, repairing, maintenance & monitoring works of electrical, mechanical, instrumentation & existing SCADA works of 39 nos. SPS/TSPS, 34 NOS SWPS,7 NOS STP along with replacement of instrumentation equipments (as and when required) for One year of STP department of Ahmedabad Municipal Corporation.

Item No. Item of Work Amount for

Unit Qty. GST/month

Anneture -I Fixed Cost

Manpower Cost (Staff Salary):

Providing of all Man power, labour (Including reliever to ensure presence of specified

type and no. of manpower per shift, as applicable) along with administration &

A (I) management charges including running office, cost of Workmen compensation,

Insurance Policy etc. labour for testing, repairing and maintenance of equipments works

for one Month of tender works for Water Operation (E&M) Department of

1.1 Project Manager (Graduate IC/EC/Computer) No. 1 36057

1.2 System Developer / Programmer (Graduate IT / Computer) No. 1 30906

1.3 Monitoring Engineer one no. per shift(8 hours)+ Reliver (Graduate / Diploma IC/EC/EE) No. 4 24931

1.4 Instrument Technician for General shift (ITI) No. 3 19288

1.5 Helper (12th Pass. ITI) for (General shift) No. 2 18454

1.6 Office Assistant No. 1 18454

Total of Item Anneture-I 12

ANNEXURE-II Comprehensive Maintenance Rate

1 Year SCADA O &M Cost

A(II) Maintenance with Comprehensive Repairing Cost: Amount for

Unit Qty. First Year in

PLC Data Transfer System at SPS / TSPS / SWPS :

Operating charges for SIM card for Data transmission, including SIM card obtaining

charges etc. any other charges as applicable for remote data transfer to master control

SCADA system as per tender

Master Control SCADA System:

Operating charges for Lease line including renewal fees, license charges and any other

charges as applicable for remote data transfer To and from Master Control SCADA- W5

CONTROL ROOM - 100 MBPS

Zonal Control SCADA System:

Operating charges for Broadband Internate Service upto 100 MBPS including renewal

2.3 fees, license charges and any other charges as applicable for remote data transfer To and No. 5 4224

from Zonal Control SCADA

Total Item A(II) 101

Comprehensive Maintenance & Repair: Comprehensive maintenance (Routine,

Preventive & Break down maintenance) and repairing work charges of all

Instrumentation and SCADA, Electrical, Mechanical equipments with replacement of

spares,materials, consumables along with administration & management charges

including cost of lubricants, tools, statutory periodical approvals & testing of equipments

etc. (i.e. Electromagnetic Flow Meter, PCB of Convertor, M.S. Fabrication work, Batteries

of UPS, PVC pipes & accessories, Chlorine Kit, PH analyzer, TSS analyzer, open channel

flowmeter Membrane, Electrolyte solution, SMPS, Power Supply Cable, Signal Cable,

Modbus Cable, Electromagnetic Transducer Cable, PLC panel Accessories, HMI,

Computer, printer Maintenance of Master & Zonal SCADA , Control room furniture , A.C.

...etc.) as per tender technical specifications. Note - STP outlet Analysers is Not Included

in scope of this Tender.

Total of Item ANNEXURE-II 102

Total Fixed Amount ANNEXURE-(I + II)

Total Fixed Amount for one month

ANNEXURE-III SITC As and When Required

C As and when required during contract period Rate with out

Qty. Unit Amount

1.0 LEVEL MEASURING SYSTEM FOR ESR & SUMP

Supply, installation, testing and commissioning of Ultrasonic type Level Transmitter/ Radar type with

remote type transmitter 4-20 mA HART o/p with 40 meter cable between Sensor and Transmitter along

with all required accessories, Weather proof enclosure for transmitter , mounting stand , etc. complete in all

respects with local and remote display at HMI/SCADA, as per specification and having following

measurement ranges for liquid (Water) application:

Meas. Range: upto 15m (ESR & Sump) 4.00 Nos. 175773

The scope also includes providing 4" flanged puddle pipe approximate 300 mm long including fixing of the

same in existing civil structure slab of Sump for mounting of sensor .The work also include all necessary

work like make hole,repair / modificationin existing slab, etc.

2.0 MULTIFUNCTION METER WITH RS 485 PORT FOR LT PANEL STARTER & PMCC INCOMER

Supply, Installation, Testing & Commissioning of Multifunction meter with RS 485 Communication port (in

each starter of the PMCC Panel to measure the energy consumption in pumping station by pump sets

including necessary cutting and modification in PMCC Starter, install MFM with required wiring and

termination upto terminal block, etc, The work shall be complete in all respects and as per specification.

The scope shall also include to replace existing MFM where required as directed by engineer-in-charge and

the scope of dismantling the existing MFM and depositing the same in AMC store or as directed by EIC and

providing with new one as per the Qty. at each location as directed by Engineer-in-Charge (EIC) / Client.

Note : Quantity are tentative and bidder shall be execute Quantity as per site requirement.

3.0 INSTRUMENT CABLE & ACCESSORIES

Supply, Laying, Installation, Connection, Termination, Testing & Commissioning of Instrument Cables and

accessores as per specs. The unit rate shall include.

(a) Supply, loading & unloading of the cable at site from store.

(b) Shifitng of cable from site store to place of installation.

(c) Fixing of cable clamps, brackets, supports, route markers etc. where ever required to fix the cables

safely. 250.00 Mtr. 179

(d) Excavation, back filling and levelling of ground alongwith laying of fine sand, protection bricks and other

necessary civil material for laying cables outside the building.

(e)Testing and submission of sketches & reports of all the cables laid.

3.1 CONTROL CABLE

3.2 SIGNAL CABLE

1P X 1.5sq.mm. 250.00 Mtr. 148

3.4 CABLE END TERMINATION & CONNECTION :

Supply, fixing, connection, testing and commissioning of double compression brass cable glands and

crimping type Bimetalic lugs / sockets with necessary tools and equipments as specified in specifications

and IS complete in all respects. The glands and lugs / sockets shall be suitable for cable size and type

mentioned above. The job also includes earthing the glands and armour of the cable with common earth bar

or flexible copper mesh as applicable.

3.5 CONTROL CABLE

10C X 1.5sq.mm 25.00 Nos. 379

3.6 SIGNAL CABLE

1P X 1.5sq.mm. 25.00 Nos. 162

4.0 INSTRUMENT CABLE TRAY

Supply and installation / erection of Perforated type cable tray of galvanized mild steel sheets of 2 mm

thickness with required, hardware, fitting and support structral asccessories . All material shall be Hot dip

galvanised as per IS 2629 and tray hardware shall be in GI. Support structutre shall be of structral steel for

mounting the cable tray on wall / cable trench or as per site condition,

200 X 50 mm - Perforated type

4.1 50 X 50 mm - Perforated type

5.0 Suppply , installation ,Testing and commissoning of Modem at SPS/TSPS/ SWPS 12.00 Nos. 20000

6.0 Supply, instaallaiton , Testing and commissoning of PLC 10.00 Nos. 73602

7.0 Supply, instaallaiton , Testing and commissoning of HMI 10 inch 7.00 Nos. 91392

8.0 SITC of 3 KVA UPS as per tender specification (Include Battery)

SITC of 5 KVA UPS as per tender spedification (Include Battery) 1.00 Nos. 81561

10.0 Dismantling of existing SCADA instrument & Re-installation of SCADA Instruments after Augmentation

work of SPS / TSPS / SWPS / STP. 7.00 Nos. 20500

11.0 Hook up with newly installed Flowmeter, Pressure Transmitter, Level

Transmitter, Analyzer at site after augmentation work completed at

existing SPS / TSPS / SWPS / STP with required analog & Digital I/O 7.00 Nos. 20500

card, panel wiring, programming,cabling work configuration with existing panel etc

Total of Item ANNEXURE-III

Amount Summary ( 1 Year SCADA O &M Cost)

1 Total of Item Anneture-I

2 Total of Item Anneture-II

3 Total of Item Anneture-III

Grand Total of O&M Work for One Years (A+B+C)

Grand Total of O&M Work for One Years (A+B+C)

PRICE QUOTATION SHEET

Name Comprehensive operation, repairing, maintenance & monitoring works of electrical, mechanical, instrumentation & existing

of SCADA works of 39 nos. SPS/TSPS, 34 nos. SWPS, 7 nos. STP along with replacement of instrumentation equipments (as and when

Work : required) for One year of STP department of Ahmedabad Municipal Corporation.

Earnest Money Rs. :

Date of Opening of Tender :

Quoted Price in Rs. 96,21,978/23

I / We am / are willing to carry out work at _________ % abpove/below percent (in figures) (should be written in figures and words) of the

estimated cost, as mentioned above. Amount of my / our tender works out for Rs. ____________________________ (in figures)

Estimated amount put to tender Rs.

Signature of Contractor

Company’s seal :