CERTAIN MISC WORK DRAIN PATH, STREET LIGHT, ROAD SIDE FURNITURE AT RESIDENTIAL AND TECH AREA OF IRDE AND DEAL UNDER GE(I) RND DEHRADUN

Amount

M&L for Hardcore of broken stone or bolders guage n exc 63 mm, deposited, spread and levelled n. exc. 15 cm thick, watered and rammed to true surface with Broaken stone or boulder complete all as specified and directed.

M&L for cement concrete 1:4:8 Type D-2 using 40 mm graded crushed stone aggregate in foundation filling sub base and mass concrete with and including demolition of old concerete and rubbish of the premises complete all as specified and directed.

M&L for cement concrete 1:3:6 Type C2 using 40 mm graded crushed stone aggregate in foundation filling sub base and mass concrete with and including demolition of old concerete and rubbish of the premises complete all as specified and directed.

M&L cement concrtee 1:3:6 typeC2 using 40 mm graded crushed stone aggregate as surface channel drains, etc including demolition of cement concrete of any description in ground floor and pavings n exc 15 cm below or above ground level with and including demolition of old concerete and rubbish of the premises complete all as specified and directed.

M&L For extra for forming fair finished drain or channel as inner girth in cement concrete using extra cement including form moulds mitred/stopped ends etc. complete all as specified and directed.

M&L for Plain cement concrete 1:2:4 type -B2 (using 40mm graded crushed stone aggregate as in foundation filling & mass concrete , sub base with and including demolition of old concerete and rubbish of the premises complete all as specified and directed.

M&L for plain / reinforced cement concrete) type B-1using 20 mm graded crushed stone aggregate as , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and the like with and including demolition of old RCC covers of any description and rubbish of the premises complete all as specified and directed. Note:-Reinforcement shall be measured and paid for separately in respective items

M&L for reinforced precast cement concrete(1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in landing, cover slab (for manholes, shelves), chullah hoods, chajjas, water troughs,mangers, shelves an similar articles with plain faces incluing necessary form work, & set in cement mortar (1:4) with and including demolition of old RCC covers of any description and rubbish of the premises complete all as specified and directed. Note:-Reinforcement shall be measured and paid for separately in respective items

M&L pre-painted Pre-cast cement concrete type B1 1:2:4 using 20mm crushed block masonary with solid blocks ex. 10 cm in width setting with cement mortar 1:4 with and including dismalting of existing block & rubbish of the premises complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 with and including demolition of old brick work & rubbish of the premises complete all as specified and directed.

M & L for 18 to 20mm thick Granite stone slab (of any type/Colour ) Slabs machine cut in skirting/dado and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over 15mm thick cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing for Granite stone slab with and Laid, bedded & pointed in any mortar with and including dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.

S&F for framed work such as grills, gratings, etc.. With ends of bars shouldered and riveted, or forged into spikes, framed guard bars, barred iron doors ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con-forming to Fe. 290. Gde-E-165 including dismantiling.old framed workcomplete all as specified and directed. Note (ii) :- Work will be carried out upto 6 story in necessary scafolding and safety measures and labour insourance etc complete all as specified and directed.

S&F MS Square or rolled section as in framing for cladding,glazing, panel framing and the like fixed with angle cleats and connecting plates etc Fe-410-W (gde-E250) Quality B with and including old framed work complete all as specified and directed

M&L for Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws with and including dismantling old sheting complete all as specified and directed.

M&L for Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws with and including dismantling old sheting complete all as specified and directed.

S&F 3mm thick Alka Pannel board as in flashing complete with fixing arrangement as per manufacter direction with and including dismantiling of old Alka Pannel & complete all as specified and directed.

S&F for 4 mm thick Alca Pannel pattern Letter writing nexc 30 Cm in height complete with fixing arrangement as per manufacter direction, Complete all as specified and directed

M & L 12mm thick POP/gypsum board ceilng with concealed metal grid system comprising of 80 x 26 x 0.55mm as ceiling section 20 x 27 x 30 x 0.55mm as perimetar channel & 15 x 45 x 15 x 0.9mm as inter mediate channel complete. Frame structure suspend fram roof by ceiling angle of size 25 x 10 x 0.55mm with and including dismantling of ceilling including cover fillet complete all as specified and directed.

M&L for taking out old drapery rod and S&F Vertical Roller window blinds manually operated of different / single shade and design as approved by GE incuuding necessary fittings complete all as specified and directed.

S& F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall etc with and including dismantling of existing sheeting any gauge thickness complete all as specified and directed.

M&L for Vitrified tiles coloured ceramic heavy duty deisigner tiles of size 400 mm X 400 mm X 12 mm checkered set , jointed and pointed in neat cement slurry in floors with grey cement over 15 mm thick screed bed in CM 1:6 with and including dismantiling existing floor tilling including cement mortar bedding (but not backing) complete all as specified and directed. Make : Jahnson Endura premium quality or equivalent as approved by GE.

M & L forVirified Ceramic tiles 10 mm thick dark shade double charged/ultracharged (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed inwhite or colour cement to match with shade and including 15 mm thick screed bed in CM 1:6 with and including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed.

Ditto srl item No 23 above but on vertical surface such as dado, skirting etc including 10 mm thick rendering in CM (1:4) complete all as specified and directed complete all as specified and directed

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand with and including demolation of old block complete all as specified and directed.

Taking down existing cement or cement lime plaster/Grit wash of any description and in any position on brick or concrete surfaces etc including racking out joints, hacking for key scrubbing down with water etc complete all as specifed and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L Complete removing of existing treatment from wall / ceilling by using machinary complete all as specified and directed.

M&L for Prepration of new/ scrapped surface of wall and applying 3mm thick Asian acrylic damp proof wall care putty in two coats as per manufactur instruction complete all as specified and directed.

M&L for Complete removal of existing treatment of old surface and washing rubbing down and stoping of distempered and painted surface of wall and applying two coats of cement based paint complete all as specified and directed.

M&L for Preparing newly plastered surfaces of walls and applying two coat of cement base paint complete all as specified and directed.

M & L for preparing new plastered / puttyied surface of walls and applying two coat of Oil Bound Distemper over and including a coat of alkali resistant complete all as specified and directed.

M&L for preparing old surfaces of floor/ concrete/ plastered or un-plastered by brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of weather resistant paint/abrassiaon paint with two different colour on concrete surface / curved stone / floor concrete tile complete all as specified and directed

M & L preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for Preparation of old steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for complete remmoving of existing treatement from old painted steel surfaces and preparation of scrapped surfaces any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparing the existing damages surface of path/road by cleaning-cutting to shape the surface and repairs with ready mix bituminous road material as per manufactures instruction complete all as specified and directed.

M&L for removing the plants/ vegetation upto Six story height including penefreated roots complete and injecting chemical GLYPHOSPHATW 41% SL 20 ml or till refusal by makimg cut/ injection in the stem of plant 30mm C/C spraying with solution (25ml Glyphospoto 41% diluted with one litre water) including necessary scaffolding etc wk will be carried out upto 6 th storey complete all as per specification and directed.

M&L for cleaning of open/covered drain and applying a spray of bleaching powder @ 1.00 Kg/Rm area for helthy hygenic atomoshphare including removing of sludge from existing site to at minimum distance of 1.5 Km from the crowded area and also spray of bleaching powder @ 1.00 Kg / Sqm on sludge obtain from existing site complete all as specified and directed.

Supplying,fixing,testing and commissioning in replacement of LT distribution Panel (CPRI appproved) Cubicle type IP-56,in-door type factory /fitting fabricated made out of 3 mm thick CRCA sheet outer & 2 mm thick CRCA sheet inner of suitable size to accommodate all accessories / fitting, compartmentalized in construction to accommodate the incoming MCCB and TPN bus bars and outgoing feeders. The TPN bus bars shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC / epoxy insulator. The incoming as well as outgoing MCCBs shall have extension links of current carrying cap not less than 1.5 times the rated capacity of individual feeders. The extension links shall be supported on DMC /epoxy insulators having provision for termination of incoming and outgoing cables. All extension liks/ interconnection shall colour coded sleeves. The cubicle shall have frame work, bottom & 45 CM long 4 legs of size 40 x40 x 6 mm angle iron, grouted in PCC 1:3:6 as directed by Engr-in-charge. A detachable gland plate of thichness not less than 3 mm thick should be used at the bottom for entry of armoured cable of adequate size compression glands, The panel shall be painting with powder coated finish with RAL 7032 SIEMENS GRAY STRYCTURE after seven tank phosphate treatment, front & back opening type and fixing 2 Nos danger notice plate with letter, figures and conventional skull bones in signal red colour and fixed front & back door to LT panel with voltage and danger indicated in Hindi and English with double door shutter and shall have louvers and air vent gasket for natural flow of air, Neoprene adhesive type gasket shall be used to make panel vermin proof and comprising of following :- Make of Panel boards :- Legrand, L & T, Shalabh (India) Industries & Bright Panels

As Incomer :- (a) Bus bar TPN, Aluminium, 600 Amps - 01 Set. (b) 200 Amp FP Thermalmagnetic release adjustable MCCB with a breaking capacity of 36 kA with Ics= Icu 100%, along with suitable spreader links = 01 No. (Make :- L&T/Legrand/AE/SIEMENS/Havells) (c) Digital type multy function meter to measure V.A.F PF with suitable CTs = 01 set. (Make :- L&T/Legrand/AE/SIEMENS/Havells) (d) LED type Phase indicator lamp ( RYB) = 03 Nos. As outgoing:- (a) 63 Amps FP Thermal magnetic release adjustable MCCB with a breaking capacity of 25 KA with Ics=Icu 100%, along with suitable spreader links = 06Nos. (Make:- L&T/Legrand/AE/SIEMENS /Havells)

Supply and fixing in replacement of UNSV 05 to 15W LED Post top lantern complete accessories to be fixed on pole/wall including connecting the fitting to control switch at the bottom of the pole with using 2.5 Sqmm two single core PVC insulated and unsheathed copper conductor cable complete,all as directed and directed. Make : Mepro Cat No- PTL-03 or equivalent model of make Havells/Surya/Bajaj/ Crompton).

Supply, fixing & testing in replacement of UNSV 72W LED street light IP66 Powder coated pressure die cast aluminium High power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewired and suitable fixing arragement for mounting on existing MS frame bracket including connecting the fitting complete all as specified and directed. (Make- Surya Cat No:SLE-UL 72W IP66GXT or equivalent model of make Havells/ Surya/Bajaj/Mepro/C&S).

Supply, fixing & testing in replacement of UNSV 200W LED Flood light IP66 Powder coated pressure die cast aluminium High power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewired and suitable fixing arragement for mounting on existing 16 mtrs High Mast/11 mtrs pole /9 mtrs poleor Bldg MS frame/ bracket including connecting the fitting complete all as specified and directed. (Make- Surya Cat Part No:SLE FL 200W IP66 LIVIA or equivalent model of make Havells/C&S/Bajaj/ Metro/Crompton).

Supply and fixing in replacement of UNSV Post top lantern fully cast aluminum body finished with polyurethane paint (with prior Treatements) with acrylic window cover total length of 762 mm (30 Inches) and Breadth 431 mm ( 17 Inches) including brass holder provided with aluminum cover and Spigot Entry 78 mm with 50 Watts LED bulb complete accessories to be fixed on pole/wall including connecting the fitting to control switch at the bottom of the pole with using 2.5 Sqmm two single core PVC insulated and unsheathed copper conductor cable complete,all as directed and directed. Make : Mepro Cat No- PTL-0003 or equivalent model of make Havells/Surya/Bajaj/ Crompton/C&S).

M/S Anil kumar

M/S P K ARORA

Gaur Construction Co

M/S PUNDIR BUILDERS

Gupta Brothers

Amit Associates