REPAIR TO STEEL FURNITURE UNDER GE LANSDOWNE

Amount

Charpoy GI with plywood top (a) Removing of unserviceable old plywood from charpoy GI pipe, tightening of loose components of (i.e. complete charpoy), S&F plywood of required size 12 mm thick BWR grade ISI marked confirming to IS: 303 Make ; Centhury, Kit ply ,with mild steel galvanised iron nuts and bolts of required size and suitable length. welded over the long rails. 14 Nos of semi circular top bolt of 6 mm dia 75 mm long and nut with steel washers to be used for fixing of plywood top including drilling holes complete all as directed by engir - in charge . FD-220/FD/MAP/01

(b)Removing of unservicable long rail and S & F new long rail of GI trubing 32 mm bore medium grade (ISI marked) duly threaded both ends all as per drg. FD-220

(c) Removing of old unserviceable short rail and making of 1 Nos short rails from long rails obtained from item No. 1 (a) and threading the both ends of short rails and fixing in position complete. FD-220

(d) Removing of old unserviceable legs and making of 1 Nos legs from short rails obtained from item No. 1 (b) and threading the both ends of legs and fixing in position complete. FD-220

(e Removing of unserviceable 3 way elbow and S & F new GI elbow 32 mm dia ISI Marked as per drawing. FD-220

(f) Removing of unserviceable check nuts and S & F new 32 mm dia GI Check nut (thickness of check nuts shall not be less than 8 mm) all as per drawing. FD-220

(g) Removing of unserviceable Caps and S & F new 32 mm dia GI Caps ISI Marked welding to GI Legs all as per drawing. FD-220

(h)Removing old UNSV.flate iron of Charpoy GI pipe and providing safe stiffener of flate iron 900mmx25mmx5mm and duly painted with two coat black colour synthetic enamel paint over red oxide primeand directed by Engr in Charge FD-220

(j)Removing old UNSV. MS tube of Charpoy IP/MAP and providing safe stiffener of MS tube 900mmx 25mmx25mmx1.6 gagu eand duly painted with two coat black colour synthetic enamel paint over red oxide prime and directed by Engr in Charge FD/MAP/01

Chair CB steel with Arms (a) Removing of unserviceable seat and S & F new seat as required made of seasoned teak wood duly caned with half round 2 mm plastic cane and providing flat iron 25 x 3 mm stiffeners 4 Nos as per drawing. FD-75

(b) All as per item No 3 (a) above but back seat of chair. FD-75

(c) Removing of unserviceable hand rest and S & F new hand rest made of 1st class seasoned teak wood duly polished in black colour as per drg. FD-75

(d) Removing of unserviceable PVC caps and S&F new caps as per drg. FD-75

(e) Removing of unserviceable shoe and S & F new PVC/hard rubber shoes as directed by Engr in Charge. FD-75

Chair CB steel without Arms (a) Removing of unserviceable seat and S & F new seat as required made of seasoned teak wood duly caned with half round 2 mm plastic cane and providing flat iron 25 x 3 mm stiffeners 4 Nos as per drawing. FD-75

(b) All as per item No 3 (a) above but back seat of chair. FD-75

(c) Removing of unserviceable PVC caps and S & F new caps as per drg FD-75

(d) Removing of unserviceable shoe and S&F new PVC shoes as per drg FD-75

Table dining ORs (a) Removing of unserviceable top and S&F New top of 18 mm thick MDF board exterior grade covered with 22 gauge aluminium sheet all as per drawing. FD-165

(b) Removing of unserviceable long rail/stiffner and S & F new long rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drawing. FD-165

(c) Removing of unserviceable short rail/siffner and S & F new short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drawing. FD-165

(d) Removing of unserviceable legs rail and S & F new legs of conduit pipe 25 mm 1.6 mm thick as per drawing. FD-165

(e) Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing FD-165

(f) Removing in old existing paint by scraping and applying two coats of SE paint over a coat of red oxide primer to the frame of table as per drawing. FD-165

Form with out back (a) Dismantling of old unserviceable seat plank of form without back and providing and fixing of New seat plank of size 1525 x 255 x 25 mm thick MP teak wood complete all as specified and shown on drawing. FD-77/1027

(b) Removing existing paint from steel frame of form without back by scrapping and applying two coat of synthetic black paint over a coat of primer complete all as specified and shown on drawing. FD-77/1027

Form with back (a) Dismantling of old unserviceable seat plank of from with back and providing and fixing of New seat plank size 1800 x 255 x 18 mm thick MP teak wood including nut and bolts complete all as specified and shown on drawing. FD-78

(b) Dismantling of old unserviceable back plank of form with back and providing and fixing of new back and providing and fixing of New back plank of size 1800x150x18/19mm thick teak wood including nut and bolts complete all as specified and shown on drawing. FD-78

(c) Removing existing paint from steel frame of form with back by scrapping and applying two coat of black paint over a coat of primer complete all as specified and shown on drawing. FD-78

Almirah Large Steel with Shelves (a) Removing unserviceable handle and S & F CP handle 125 mm with nut and bolts as per drg. FD-67/1031

(b) Removing unserviceable locks and S&F brass locks of any type 6 lever as per drg. Make;- Harison/ Godrage. FD-67/1031

(c ) Removing unserviceable locking device and S&F new device including MS Rod rest all as per drg. FD-67/1031

(d) Adjustment of the existing shelves by providing new clamps removing unserviceable clamps all as directed. FD-67/1031

(e) Taking out unserviceable hinges S&F new hinges 75mm of reqd size as per drg. FD-67/1031

(f) Taking out unserviceable legs S&F new legs made out of 1 mm MS sheet as per drg. FD-67/1031

(g) Taking out unserviceable shelves and S&F new shelve made out of 1mm MS sheet as per drawing. FD-67/1031

(h) Taking out unserviceable shutters and S&F new shutters made out of 1mm MS sheet as per drawing. FD-67/1031

(j) Taking out unserviceable borken part of steel furniture to welding almirah large steel,almirah med steel, book case steel,locker bed side steel,charpoy GI/IP/Map ects. all as per drawing.(welding point min 5 CM each) FD-67/1031/1032/1029/220/MA

Almirah Medium/Small Steel with Shelves (a) Removing unserviceable handle and S & F CP handle 125 mm with nut and bolts as per drg. FD-243/1032

(b) Removing unserviceable locks and S&F brass locks of any type 6 lever as per drg.Make;- Harison/ Godrage. FD-243/1032

(c ) Removing unserviceable locking device and S&F new device including MS Rod rest all as per drg.FD-243/1032

(d) Adjustment of the existing shelves by providing new clamps removing unserviceable clamps all as directed. FD-243/1032

(e) Taking out unserviceable hinges S&F new hinges 75mm of reqd size as per drg. FD-243/1032

(f) Taking out unserviceable legs S&F new legs made out of 1 mm MS sheet as per drg. FD-243/1032

(g) Taking out unserviceable shelves and S&F new shelve made out of 1mm MS sheet as per drawing. FD-243/1032

(h) Taking out unserviceable shutters and S&F new shutters made out of 1mm MS sheet as per drawing. FD-243/1032

Locker Bed Side (a) Removing unserviceable handle and S & F CP handle 125 mm with nut and bolts as per drg. SKD-562

(b) Removing unserviceable locks and S&F brass locks of any type 6 lever as per drg. Make -harison/ Godrage. SKD-562

(c ) Removing unserviceable locking device and S&F new device including MS Rod rest all as per drg. SKD-562

(d) Taking out unserviceable hinges S&F new hinges of reqd size as per drg. SKD-562

(e) Taking out unserviceable legs S&F new legs made out of 1 mm MS sheet as per drg. SKD-562

(f) Taking out unserviceable shelves and S&F new shelve made out of 1mm MS sheet as per drawing. SKD-562

(g) Taking out unserviceable shutters and S&F new shutters made out of 1mm MS sheet as per drawing. SKD-562

(h) Taking out unserviceabled drawers and S&F new drawers made out of 1 mm MS sheet as per drawing. SKD-562

(j) Taking out unserviceable conduit pipe and S&F new conduit pipe 20 mm dia of 1.6 mm thick MS CP as per drawing. SKD-562

(k) Taking out unserviceabled pegs and S&F new cp pegs with three hooks as directed by Engineer in Charge. SKD-562

Locker Bed Side (a) Removing unserviceable handle and S & F CP handle 100 mm as per drg. FD-1029

(b) Removing unserviceable hasp and stepple and S&F new hasp and stapple chromiun plated as directed by Engr in Charge. FD-1029

(c ) Taking out unserviceable hinges S&F new hinges 75mm of reqd size as per drg. FD-1029

(d) Taking out unserviceable legs S&F new legs made out of 1 mm MS sheet as per drg. FD-1029

(e) Taking out unserviceabled shelves and S&F new shelve made out of 1mm MS sheet as per drawing. FD-1029

(f) Taking out unserviceabled shutters and S&F new shutters made out of 1mm MS sheet as per drawing. FD-1029

(g) Taking out unserviceable conduit pipe and S&F new conduit pipe 20 mm dia of 1.6 mm thick MS CP as per drawing. FD-1029

Table 3' x 2' with drawer (a) Removing unserviceable top and S & F new top made out of 18/19 mm prelaminated MDF board exterior grade of shape and size with 6 mm teak wood beading all around as shown in drg. FD-1008

(b) Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing. FD-1008

(c) Removing of unserviceable short rail/siffner and S & F new short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drg. FD-1008

(d) Removing of unserviceable long rail/long siffner and S & F new short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drg. FD-1008

(e) Removing unserviceable locks of drawer and S&F brass locks of any type 5 lever as per drg. Make harison/ Godrage . FD-1008

(f) Removing unserviceable drawers and S&F new drawers made out of 1mm thick MS sheet as per drg. FD-1008

(g) Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing FD-1008

Table 3' x 2' without drawer (a) Removing unserviceable top and S & F new top made out of 18/19 mm prelaminated MDF board exterior grade of shape and size with 6 mm teak wood beading all around as shown in drg. FD-1007

(b) Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drg. FD-1007

(c) Removing of unserviceable short rail/siffner and S & F new short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drg. FD-1007

(d) Removing of unserviceable long rail/long siffner and S & F new short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drg. FD-1007

(e) Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing FD-1007

Table 3' x 3' (a) Removing unserviceable top and S & F new top made out of 18/19 mm prelaminated MDF board exterior grade of shape and size with 6 mm thick teak wood beading all around as shown in drg. FD-1009

(b) Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing.FD-1009

(c) Removing of unserviceable rail and S & F new rail of conduit pipe 25 mm 1.6 mm thick as per drg. FD-1009

(d) Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing FD-1009

Table office Clerk Steel (a) Removing unserviceable top and S & F new top made out of 18/19 mm prelaminated MDF board exterior grade of shape and size with 6 mm thick teak wood beading all around as shown in drg. FD-84/1004

(b) Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing. FD-84/1004

(c) Removing unserviceable locks of drawer and S&F brass locks of any type 5 lever as per drg. Make harison/ Godrage FD-84/1004

(d) Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing FD-84/1004

(e) Adjustment of drawers where ever reqd as directed by Engr in Charge FD-84/1004

Table office officer steel (a) Removing unserviceable top and S & F new top made out of 18/19 mm prelaminated MDF board exterior grade of shape and size with 6 mm thick teak wood beading all around as shown in drg. FD-1002/1003

(b) Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing. FD-1002/1003

(c) Removing unserviceable locks of drawer and S&F brass locks of any type 5 lever as per drg. Make harison/ Godrage FD-1002/1003

(d) Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing FD-1002/1003

Teapoy Verandah (a)Taking out unserviceable legs and S&F new legs of existing shape and size as required duly welded to all the places as per drawing. FD-208

(b) Removing of unserviceable top and providing new top made of pre laminated MDF board 18/19 mm thick exterior grade including 6 mm thick teak wook beading all round all as per drawing. FD-208

Chair Verandah: Removing existing cane from chairs verandah and painting the frame with two coats of synthetic enamel paint after preparation of surfaces and then weaving with and including new cane 4 mm wide half round and S & F new PVC Shoes for chair verandah complete all as directed. FD-19

M R Taders

Avtarsinghchaddhaandcompany

TARUN ENGINEERING WORKS

M/SDoon furnishers