Loading…
Loading…
Tender Value
₹10.6 L
EMD Value
₹31,770
Closing Date
2 Oct 2026, 2:00 pm5d left
EE Mdda
Mdda office Transport Nagar dehradun
Renovation of Aganbari at Ward 84 Ajad Vihar Banjarawala Dharampir Vidhansabha Dehradun
2026_MDDA_100597_1
MDDA/CIVIL/1042/21/2026-27
Open Tender
Civil Works
Percentage
90 days
Dehradun
Please refer Tender documents.
1 document required · 1 mandatory
₹1,770
SECRETARY MDDA
₹31,770
26 Sept 2026
26 Sept 2026
3 Oct 2026
26 Sept 2026
2 Oct 2026
26 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All Kinds of soil | 15.5 | Cum | 150.42 | ₹2,331.51 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | 8 | Cum | 166.1 | ₹1,328.8 |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | 20.4 | Cum | 1,799.79 | ₹36,715.72 |
| 4 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | 25.8 | Cum | 593.64 | ₹15,315.91 |
| 5 | 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | 8.5 | Cum | 5,772.88 | ₹49,069.48 |
| 6 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 Kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All work upto plinth level | 2.5 | Cum | 8,054.87 | ₹20,137.18 |
| 7 | All work from plinth level upto floor V level. | 4.2 | Cum | 8,356.27 | ₹35,096.33 |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete below and above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | 524.61 | Kg | 91.4 | ₹47,949.35 |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns etc. for mass concrete. | 5 | Sqm | 332.33 | ₹1,661.65 |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns etc. for mass concrete. Suspended floors, roofs, landings, balconies and access platform. | 8.5 | Sqm | 785.81 | ₹6,679.38 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.30 MB
BOQ_118592.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .