ELECTRIFICATION WORK OF UNDER CONSTRUCTION BUILDING OF VADIA SUB DIVISION

Name of Work:-Electrification of under construction office building of Vadiya Sub Division.

Sr. No. Item Description Qty. Unit Amount

POINT WIRING AND MAINS / EARTHING

1 [a] Point wiring with approved ISI marked 1.1 kv grade 2 X 1.5 sq. mm copper PVC 109.00 Point 445.00 48505.00 1-2-1 [a]

insulted FRLS wire with 1.5 sq. mm (green) copper PVC insulated FRLS wire for earth

continuity in FIA approved ISI mark medium class white colour 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected in brick

wall / slab along with continuous G.I. fish wire to draw wires and laid in approved

manner zari for PVC pipe and boxes shall be filled with cement mortar and finishing

the surface to match the wall / ceiling complete with approved make 5/6 Amp. modular

type switch and accessories mounted in 20 G. G.I. company fabricated metallic box

covered with appropriate front plate modules erected flushed with wall / ceiling with

necessary modular lamp holder / modular ceiling rose / HD Connector as directed for

concealed wiring (a) Light point. (for make of wire and switch see the attached

approved make list)

Necessary sheet must be erected on all box to prevent mortar going into the box.

Length of point wiring must not increase than 10 mtr. For that necessary switch boards

and their locations must be finalised before execution by agency otherwise payment

will not be done for extra long point. (For future extention, if required, agency has to

erect one higher size metal box and modular plate as per instruction of EIC. Cost of

blank plate shall be paid as per tender item) [Wire must be having box packing] This

item include cleaning (inside/outside) of all GI switch board elect. Point box,fan hook,

MCBDB, swich board & box cutting plaster finishing for fixing modular plate without

1 [b] Two way controlled light point. Cat.-III (for make of wire and switch see the 3.00 Point 562.00 1686.00 1-2-5 [a]

attached approved make list)

1 [c] For Bell PointCat.-III (for make of wire and switch see the attached approved 16.00 Point 445.00 7120.00 1-2-1 [a]

1 [d] For Fan Point (with 6 A. Modular type switch and two module hum free EME Five step 34.00 Point 632.00 21488.00 1-2-2 [a]

type Electronic fan regulator) Cat.-III (for make of wire and switch see the attached

approved make list)

1 [e] Two way controlled Fan point (with 6 A. Modular type two way switch and two 3.00 Point 562.00 1686.00 1-2-5 [a]

module hum free EME Five step type Electronic fan regulator) Cat.-III (for make of

wire and switch see the attached approved make list)

1 [f] For separate Point (with 6 Amp. Switch & 3/5 pin socket) Cat.-III (for make of wire 3.00 Point 471.00 1413.00 1-2-3-I

and switch see the attached approved make list) [a]

1 [g] For Looped on switch board (with 6/16 Amp. Switch & 3/5 pin socket) (For 4 Switch 26.00 Point 255.00 6630.00 1-2-4

4 Plug Computer board considered in loop point (4 Nos loop point per Board) in which

3 plug - 6 Amp, 1 Plug - 16 Amp should be installed) Cat.-III (for make of wire and

switch see the attached approved make list)

2 [a] Providing and erecting Medium Class FIA approved and ISI mark white colour 200.00 Mtr. 24.00 4800.00 1-3-2 [a]

(embossed) RIGID PVC PIPES of following size complete erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & clamps on / in wall / ceiling

along with continuous fish wire to draw mains with necessary fittings and junction

boxes for following dia. (a) 20 mm. dia. (for make see the attached approved make

list) (FOR EPBX SYSTEM)

2 [b] 25 mm dia. (FOR COMPUTER & CCTV CABLE) 500.00 Mtr. 33.00 16500.00 1-3-2 [b]

3 [a] Mains with marked 1.1 kv grade FRLS PVC Insulated wire with FIA approved ISI 250.00 Mtr. 62.00 15500.00 1-4-1-a

mark medium class 20/25/32 mm dia. embossed rigid PVC pipe with PVC fitting fixed [a]

with adhesive solution erected in brick wall / slab along with continuous G.I. fish wire to

draw mains laid in approved manner with plastering by cement mortar & finishing the

surface to match the wall / ceiling complete with FRLS PVC insulated wire for earth

continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS copper multi stranded

conductor mains with 1.5 sq.mm FRLS copper multi stranded conductor earthing as

per standard colour code. (with 20 mm dia PVC pipe)[From MCBDB to lighting Switch

board power supply] [Wire must be having box packing] (for make of wire see the

attached approved make list) (NOTE: THIS IS APPROX. QTY FINAL QTY WILL BE

TAKEN AS PER MESURMENT.)

3 [b] 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS 300.00 Mtr. 82.00 24600.00 1-4-1-a

copper multi stranded conductor earthing as per standard colour code.(with 20 mm [b]

dia PVC pipe) [wire must be having box packing]

3 [c] 2 X 4.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq. mm FRLS 300.00 Mtr. 111.00 33300.00 1-4-2-a

copper multi stranded conductor earthing as per standard colour code.(with 25 mm [a]

dia PVC pipe) [wire must be having box packing]

Sr. No. Item Description Qty. Unit Amount

3 [d] 2 X 6.0 sq.mm. FRLS copper multi strandedPOINT

conductor mainsAND

WIRING withMAINS

2.5 sq./ mm FRLS

EARTHING Mtr. 146.00 29200.00 1-4-2-a

copper multi stranded conductor earthing as per standard colour code.(with 25 mm [b]

dia PVC pipe) [wire must be having box packing] (for make of wire see the attached

approved make list)

4 [a] Providing & fixing 20 mm. dia. PVC insulated G.I. Corrugated Flexible pipe with 20.00 Mtr. 36.52 730.40 [RA]

necessary socket, PVC bushes, saddle, Check-nuts etc. complete of following sizes.

5 Plug Point wiring with approved ISI make 2 x 2.5 sq.mm copper PVC insulated FRLS 3.00 Point 704.00 2112.00 1-2-3 (II)

wire with 1.5 sq.mm (green) copper PVC insulated FRLS wire for earth continuity in [II] [a]

FIA approved ISI mark white colour medium class 20/25 mm dia. embossed rigid

PVC pipe with PVC fitting fixed with adhesive solution erected in brick wall/slab along

with continuous G.I. fish wire to draw wires and laid in approved manner zari for PVC

pipe & boxes shall be filled with cement mortar & finishing the surface to match the

wall / ceiling complete with 16 Amp Modular type Swich and accessories mounted in

20 G. G.I. company fabricated metallic box covered with appropriate front plate

modules erected flushed with wall. (a) 16 Amp switch & 1 No. 6/16 A universal

socket white colour suitable for 3 pin top duly. (Necessary Sheet Must Be Erected

On All Box To Prevent Mortor Going In To The Box) Cat.-III (for make of wire and

switch board see the attached approved make list)

6 Plug Point wiring with approved ISI marked 1.1 kv grade 2 x 4.00 sq.mm copper 11.00 Point 829.00 9119.00 1-2-3-

PVC insulated FRLS wire with 2.5 sq.mm (green) copper PVC insulated FRLS wire for (III)-[iii]-a

earth continuity in FIA approved ISI mark white colour medium class 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected in brick

wall/slab along with continuous G.I. fish wire to draw wires and laid in approved

manner. zari for PVC pipe & boxes shall be filled with cement mortar & finishing the

surface to match the wall / ceiling complete with 16 Amp Modular type Swich and

accessories mounted in 20 G. G.I. company fabricated metallic box covered with

appropriate front plate modules erected flushed with wall. (a) 16 Amp switch & 1 No.

6/16 A universal socket white colour suitable for 3 pin top duly. (Necessary Sheet

Must Be Erected On All Box To Prevent Mortor Going In To The Box) (Water Cooler)

Cat-III. (for make of wire and switch board see the attached approved make list)

7 [a] Providing following type of Modular Type Accessories mounted with 20 G company 1.00 Each 159.00 159.00 1-2-6-4

fabricated metalic box, single mounting base frame covered with textured / metallic

front plate, modules erected with necessary connection. As desired by Engineer in

charge. TV Co-axial Socket outlet

7 [b] Blank Plate Single. Cat.-III (for make switch board see the attached approved 30.00 Each 25.00 750.00 1-2-6-7

8 Supplying and erecting M.S./G.I. metal box having 16 Gauge painted with red oxide 30.00 Sq. 6.00 180.00 [RA]

be concealed in wall with necessary plastering & finishing with 3 mm thick laminated Inch

sheet with grooving as directed of following depth 3" depth.

LIGHT FIXTURE / FAN

9 SITC of 8 W LED Lamps integral type, cool white with PC diffuser suitable for B22 1.00 Each 111.00 111.00 2--15-2-

Lamp holder [Make- BAJAJ, PHILIPS, WIPRO, HAVELLS, OSRAM, LT, GRE, A-ii

10 SITC Of Max. 20 Watt LED Indoor Commercial make high efficiency performance 76.00 Each 293.00 22268.00 2--15--1-

lamp with high quality diffused polycarbonate body with Metal core PCB as a heat sink A-iii

and dedicated electronic driver. The lamp is provided with following feautures life

25,000 hrs at L70 , efficiency >100 lm/w with high power factor > 0.9, with CRI > 80 for

better color rendition. The lamp is suitable for direct replacing existing T8 system

magnetic system or alluminium heavy guage body, heavy duty fixing clamps

(Sample must be approved by EIC) and rewiring to retrofit electronic system. The

Lumen Output of 20 w LED T8 Lamp is mini. 2050 Lumes. The Lamp is suitable for

Installation with CRCA made base and Finishing done with Powder coating. The data

sheet of LM79 for complete lamp can also be provided. 2 KV surge protection,

THD<15% [Make- BAJAJ, PHILIPS, WIPRO, HAVELLS, OSRAM, LT, GRE,

CROMPTON (CG) make and model Aprooved by EIC as per Specification) (Note:-

The manufacturer/ authorized Channel partner of the manufacturer has to submit

yrs. free replcement Guarantee for complete Fixture)

Sr. No. Item Description Qty. Unit Amount

11 SITC of Indoor Commercial recess/surface POINT

mounted (IP20) AND

WIRING Max.MAINS

24 w Cool white

Color LED Down lighter office Lighting Luminaire with external separate driver A-iv

having BIS certification with fully die cast aluminium alloy housing without any

PVC/Plastic part with corrosion resistant powder coated finish as a heat sink with

Poly Carbonet diffuser LED complete (only from [Make- BAJAJ, PHILIPS, WIPRO,

HAVELLS, OSRAM, LT, GRE, CROMPTON (CG) CRI > 80, CCT 5600K (5400 to

5800K bin). The led's should be mounted on Metal core based PCB for better heat

conduction and long life of LED. (LM 79 for complete fixture, LM80 for individual LED

Report mustbe submitted) The fixture should have extra protection of driver like

over/under voltage, THD<15%, P.F>0.90, for 24 w fixture wide voltage range from

100 to 270 V, 50/60 HZ, 2 KV surge protection.

Fixure must have Min. 2160 Lumens light output. Fixture Efficacy should be>=90

Lumens/watt. (L70 @ 30,000 Hrs) The Fixture should be able to easily mount on

POP/Grid False cieling. The Luminiare should be tested as per IP20 standards and

following test reports should be submittedat the time of approval. ([Make- BAJAJ,

PHILIPS, WIPRO, HAVELLS, OSRAM, LT, GRE, CROMPTON (CG) Model Approved

By EIC as per Specification only) (Note:- The manufacturer/authorized Channel

partner/dealer of the manufacturer has to give a 4 yrs. free replcement Guarantee for

complete Fixture)

12 Providing & erecting Decorative wall mounting one feet long 9 W LED mirror light 5.00 Each 309.00 1545.00 2--15--3--

fitting & fixing Accessories with diffuser & Al Housing Body with white colour 3C x 1.5 H

Sq.mm Flexible PVC insulated copper wire ([Make- BAJAJ, PHILIPS, WIPRO,

HAVELLS, OSRAM, LT, GRE, CROMPTON (CG) make only)

13 Bulk head fitting Providing and erecting PVC body surface or pendent mounting LED 4.00 Each 780.00 3120.00 2-17-3

Bulk type 9 watt Lighting Fitting with electronic driver. And lumen output from luminaire

720lm , input voltage range 90-300VAC , 50Hz cool white(3000 to 6500k), inbuilt

driver, -20degC to +60degC working temperature, AL frame with Beam Angle 120deg

14 [Make- Bajaj,

Providing, Havells,

erecting, Pyrotech,

ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 34.00 Each 1929.00 65586.00 5-1-6

Class-I, 50 Hz. Specification of Celling Fan must be as per below. (1) Sweep:

mm, (2) Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power

Consumption: Between 50 to 56 W, (5) RPM: 370 to 380, (6) Air delivery: 218 to

CMM, (7) Class of insulation: 'B', (8) No. of Ball bearing: Two, (9) Total Body:

Aluminium die cast, (10) Blade: Aluminium approx 1.1 mm thick, (11) Colour: White

high grade powder coating, (12) Canopy: Two Nos. Heavy duty, (13) Condenser:

Branded make,(14) Down road: up to 1.0 mtr as per site tequirment, (15) Required

fixing accessories, (16) 3 core 1.0 sq.mm wire as per site requirment, (Crompton HS

Plus, Usha make striker plus model, Bajaj make Kessel star, Havell's make ES Plus,

make & model approved by engineer in charge) (subject to above specifications)

15 Supplying & Erecting Fan Hook Of 10 mm M.S Round bar bounded to the RCC bars 34.00 Each 125.00 4250.00 5-2-3 + 5-

up to 50 mm Length each side & piereced through 18 Gauge G.I Box having 125 mm 2-5

dia depth of 75 mm complete erected concealed in ceiling with necessary 3 mm white

ISI Marked Sheet

16 Supplying & erecting approved make low noise decorative exhaust fan having size 5.00 Each 1687.00 8435.00 5-3-3

200 mm with 1350 RPM with square frame ABS body with inbuilt lowers & square

frame. (CROMPTON, BAJAJ, USHA)

17 Supplying & erecting 19/20 mm. nominal bore "B" class G.I. pipe / M.S. pipe down 4.00 Rn. 107.00 428.00 5-2-1

rod erected duly painted for fan complete with necessary 24/0.2 flat 3 core flexible Mtr.

Core with earthing. (Execute if fall ceiling occurs)

18 Supplying & erecting Electronic Type Cordless Call Bell erected on PVC/Metal board 3.00 Each 248.00 744.00 1-6-13

having portable bell push working on D.C. & bell on 230 V A.C. supply with cells /

Distribution box

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having 3.00 Each 3010.00 9030.00 3-12-2-III

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action &

19 tripping with all advance feature & do not incorporate any electronic component for

following Max. rating erected as directed. (iii) 63 AMP- FP. (Make: HAVELLS, L&T

HAGER(AU Series), LEGRAND(Ekinox3), SCHNEIDER, SIEMENS(Betagard-

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having 3.00 Each 2611.00 7833.00 3-12-2-II

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action &

20 tripping with all advance feature & do not incorporate any electronic component for

following Max. rating erected as directed. (iii) 40 AMP- FP. (Make: HAVELLS, L&T

HAGER(AU Series), LEGRAND(Ekinox3), SCHNEIDER, SIEMENS(Betagard-

Sr. No. Item Description Qty. Unit Amount

Providing & erecting 415 V MCB Four PolePOINT for Motor & Inductive

WIRING Load/ (C

AND MAINS Curve)

EARTHING 1.00 Each 730.00 730.00 3-10-5

having 10KA breaking capacity & confirms to IS :8828 in existing box having following [c]

21 capacity [c] 63 Amp. Cat.-III (Make: HAVELLS, L&T HAGER(AU Series),

LEGRAND(Ekinox3), SCHNEIDER, SIEMENS(Betagard-8GB32) (Same as MCDDB

Providing & erecting 240 V MCB Double pole switch for Lighting load (B curve) 6.00 Each 293.00 1758.00 3-10-3

having 10 KA breaking capacity & confirms to IS:8828 in Existing M.S. box having [b]

22 following capacity. For 40 Amp. Cat:-III (Make: HAVELLS, L&T HAGER(AU Series),

LEGRAND(Ekinox3), SCHNEIDER, SIEMENS(Betagard-8GB32) (Same as MCDDB

Miniature circuit breaker single pole 6 Amp. to 32 Amp. suitable to operate on 240 11.00 Each 111.00 1221.00 3-10-1-

V A.C. system and having breaking capacity 10 KA to be erected in existing box. B

confirming to IS 8828/1996 with ISI Mark. Cat.III. (Amp rating of MCB will be installed

as per requirement between 6 to 32 AMP.) (Make: HAVELLS, L&T HAGER(AU

Series), LEGRAND(Ekinox3), SCHNEIDER, SIEMENS(Betagard-8GB32) (Same as

Approved make 16 Way Double Door metal clad D.B. company prewired having 2.00 Each 4718.00 9436.00 3-11-5-B-

Incoming MCB 40 Amp.30mA double pole ELCB,40Amp DP MCB and 12 Nos S.P. v + 3-11-

MCB of rating 6 to 32 Amp. with NL suitable to operate on 230 Volt A.C. power and 5 [b] + 3-

having overload and short circuit tripping element breaking capacity 10KA to be 10-3 [b]

erected in flush type and company fabricated 16 G.M.S./IK 08 Certificate sheet box + 3-10-1

with powder coated inside and outside after apply seven tank chemical process of + 3-12-1

M.S. sheet cover complete with suitable integral single piece construction tinned [ii]

copper busbar- and link with all necessary interconnection.and with necessary size

24 wooden board for mounting MCBDB. Manufacturer must be Provided. (1) IP

protection Certificate (2) Seven tank Power Coating. (3) Coppper/Brass make Neutral

& Earthing link with isolation and Protecting Cover.(A) For 16 Way MCBDB with I/c:-

40 Amp. DP 30 mA, 10 KA ELCB -01 no. & 40 Amp. DP MCB - 01 no. & O/G:-

Amp. SP MCB:- 6 Nos., 16 Amp. SP MCB:- 6 Nos. (For Computer Switch Board

Power Supply Only) (Make: HAVELLS, L&T HAGER(AU Series),

LEGRAND(Ekinox3), SCHNEIDER, SIEMENS(Betagard-8GB32) (ELCB/MCBSame

Approved make 8 Way Double Door metal clad D.B. company prewired having 2.00 Each 3705.00 7410.00 3-11-5 [f]

Incoming MCB 40 Amp.30mA double pole ELCB,40Amp DP MCB and 12 Nos S.P. + 3-10-3

MCB of rating 6 to 32 Amp. with NL suitable to operate on 230 Volt A.C. power and [b] + 3-

having overload and short circuit tripping element breaking capacity 10KA to be 10-1 + 3-

erected in flush type and company fabricated 16 G.M.S./IK 08 Certificate sheet box 12-1 [ii]

with powder coated inside and outside after apply seven tank chemical process of

M.S. sheet cover complete with suitable integral single piece construction tinned

copper busbar- and link with all necessary interconnection.and with necessary size

25 wooden board for mounting MCBDB. Manufacturer must be Provided. (1) IP

protection Certificate (2) Seven tank Power Coating. (3) Coppper/Brass make Neutral

& Earthing link with isolation and Protecting Cover.(A) For 8 Way MCBDB with

KA ELCB -01 no. & 40 Amp. DP MCB - 01 no. & O/G:- 6 Amp. SP MCB:- 1 Nos.,

Amp. SP MCB:- 3 Nos. (For RAPDRP Room) (Make: HAVELLS, L&T HAGER(AU

Series), LEGRAND(Ekinox3), SCHNEIDER, SIEMENS(Betagard-8GB32)

(ELCB/MCBSame as MCDDB Make)

Mains with ISI marked, 1.5 KV grade electrolyte multi stranded, annealed copper 50.00 Mtr. 91.00 4550.00 1-4-4 [e]

conductor with heat resistant PVC insulated conforms to IS:694, IEC - 227 erected in

26 existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required. [f] One wire 6.00 sq. mm

Earthing System

SUPPLY & ERECTION OF MAINTENANCE FREE ECO-FRIENDALY READY 4.00 Each 10000.00 40000.00 [RA]

CAPSULE PIPE –IN CAGE(PIC) TYPE EARTHING

3 mtr Long. (more details, drawing and technical specification attached with this

tender read it carefully before quating rate)

Constructing brick / CC block masonary earthing chamber 500 mm X 450 mm X 600 4.00 Each 1532.00 6128.00 [RA]

28 mm incuding 500 mm X 400 mm C.I. horizontal grating with frame complete (This item

must be executed by civil agency)

Mains with ISI marked, 1.5 KV grade electrolyte multi stranded, annealed copper 80.00 Mtr. 91.00 7280.00 1-4-4 [f]

conductor with heat resistant PVC insulated conforms to IS:694, IEC - 227 erected in

29 existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required. [f] One wire 10.00 sq. mm

Sr. No. Item Description Qty. Unit Amount

POINT WIRING AND MAINS / EARTHING

COMPUTER NETWORK

Supplying and laying of Lucent Giga speed Systimax SCS (Cat. 6) Cable (X colour ) 900.00 Mtr. 47.00 42300.00 1-4-8 [c]

for computer data cables to be laid in prelaid PVC pipe / raceway, but without the cost

of raceway or pipe (the wire is to be drawin from MFD/JB to outlet point). (Avaya/

Molex / D-Link / Dax / Tyco make Only)

31 Termination and Testing of CAT-6 Data Socket IO as per Industries with 18.00 No. 80.00 1440.00 [RA]

ferruling for table, including cost of Site visit for work and service up to defect

laibility period.

32 “Matrix” make Digital Epabx system Universal slot-8 Ext slot-8 USB prot & auto 1.00 No. 44949.00 44949.00 7-1-2(a)

att. CLI,LCR,CUG,SDMR,15 party conf and with slot extension facility.

33 key phones (Digital) with CLI & Speaker 1.00 No. 3916.00 3916.00 7-1-3-A

35 Termination and Testing of RJ-11 Telephone Socket as per Industries with 6.00 No. 159.00 954.00 1-2-6 (3)

ferruling for table, including cost of Site visit for work and service up to defect (a)

laibility period. With Junction Box

36 ISI mark Cable with fitting charges with PVC pipe (PVC fitting fixed with 150.00 Mtr. 198.00 29700.00 1-4-7 (b)

adhesive solution erected in brick wall / slab along with continuous G.I. fish wire (2)

to draw wires and laid in approved manner zari) cable and labour

charge.(Approximate length 100 mtr.)

STREET LIGHT & CABLES

40 Providing bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside diameter 8.00 Each 446.00 3568.00 6-5-4-a

complete with suitable G.I. Sleeve tubing of 2 mm. thick and required size and length

suitable for 76.5 / 80 mm. required size of pole top having nuts and bolts for fixing the

brackets and having spread of 0.5 to 0.70 mtr. length with suitable rise as per site

condition and suitable welded stiffner reducer and nipple with check nut complete

painted with one coat of red oxide and two coats of alluminium paint. (a) For single

arm bracket. (Asian Fab Bajaj Ambica make only) Test Certificate To Be Submited.

41 Fabricating terminal box for street light pole made from 16 G. (1.5 mm.) thick M.S. 8.00 Each 702.00 5616.00 6-4-2 + 6-

sheet having following size complete with fixing arrangement for terminal board, with 3-2

necessary hole for 4 core 4 sq.mm. armoured copper cable entry and exit with 10 mm

nipple from the box. The box shall be provided with cover having up-down movement

with suitable mechanism and hinges on Top and bolting lock at bottom end. The box

shall be fixed by 2 nos.clamps fabricated from 25 x 6 mm flat. The box shall be powder

coated paint or good oil paint inside & outside of the box. The size of box should be

300 x 240 x 140 mm. (depth). Also providing & fixing terminal board of size 230 x

x 6 mm bakelite sheet with 15 Amp. copper/brass kitkat pattern porcelain fuse unit

mounted on suitable size of bakelite terminal plate. (Asian colour must be used)

Sr. No. Item Description Qty. Unit Amount

42 SITC of Outdoor aesthetically designed LED Street

WIRING Luminaire

MAINS / with total

consumption of Max. 43 W with single piece die cast aluminium housing, LED's A-i

mounted on high quality metal core PCB with extremely precison designed heat sink

complete with IP66 protection Class with polycarbonate cover the fixture should be

suitable for pole/bracket mounting. The fixture to comply both LM79 and LM

guidelines with LED module min. 110 lumen/watt with toughen Glass L70 at

hrs, provided with high quality polycarbonate lenses for better light distribution. The

Fixture Should be able to be Pole Mounted and also bracket mounted, provided with

high quality driver for protection against high and low Voltage cut Off, opertional for

high amibient and high humid envirnoments, THD of driver should be less than 12%

and P.F > 0.95. Also the Fixture should meet the following technical criterias Oprating

range Voltage 90 to 300 V, system efficiency > 100 lm/w and total lumens not less

than 4300, CCT > 5000K, CRI > 65, beam angle 120 deg, surge immunity level at

least 10 KV, Separate Potted driver should have over current, short circuit protection

so that the fixture recovers once the fault is removed, over voltage protection. In

addition to the above product should be operational in the temperature range of 0 deg

to 50 deg and humidity range of 10% to 90% RH. (GRE make GPH-SL-43W model,

Lighting Technology AO4557MOX0 model, PHILIPS, WIPRO, HAVELLS, OSRAM,

(Note:- The manufacturer/authorized Channel partner of the manufacturer has to

submit 4yrs free replcement Guarantee for complete Fixture)

43 SITC of Outdoor aesthetically designed LED Flood Light Luminaire with total 5.00 Each 9875.00 49375.00 New

consumption of maximum 120 W with single piece die cast aluminium housing, LED's LED

mounted on high quality metal core based PCB with extremely precison designed heat SOR: 14-

sink, complete with IP66 protection Class, with polycarbonate / glass cover. The fixture 2-B [d]

should be suitable for pole/bracket mounting. The fixture to comply both LM79 and LM

80 guidelines with LED minimum 130 lumen/watt with L70 at 50,000 hrs, provided with

high quality polycarbonate lenses for better light distribution. The Fixture Should be

able to be Pole Mounted and also bracket mounted, provided with high quality potted

driver for protection against, high and low Voltage cut Off, opertional for high amibient

and high humid envirnoments, THD of driver should be less than 12% and P.F > 0.95.

Also the Fixture should meet the following technical criterias. Operating range Voltage

90 to 300 V, system efficiency > 110 lm/w, CCT > 5000K, CRI >65, beam angle

deg, surge immunity level at least 10 KV. Flood Light lumens shall be more than

13200 (GRE, Lighting Technology, PHILIPS, WIPRO, HAVELLS, OSRAM,

CROMPTON (CG) make & model approved by EIC as per specification) (Note:- The

manufacturer / authorized Channel partner of the manufacturer has to submit 4 yrs.

free replcement unconditional Guarantee for complete Fixture)

44 Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI 100.00 Mtr. 175.00 17500.00 1-4-5 [k]

marked copper wires of 4 core x 4 sq.mm. [For Streetlights]

45 Providing & fixing double compressed heavy duty flange type brass cable gland Each 0.00 [MR]

with rubber ring for P V C insulated armoured cable complete with outgoing tails,

insulating tape etc. For following size cables. For 2 to 4 core x 4.0 Sq. mm (Sigma,

MCI, Comet, HMI Make Only)

46 Providing & Erecting 3 core 2.5 sq.mm. PVC insulated round copper wire ISI mark. 100.00 Mtr. 77.00 7700.00 1-4-5 [h]

47 Supplying and erecting approved make oscillating type medium duty bracket fan with 5.00 Ea. 3484.00 17420.00 5--4-4

Aluminium Blades A.C. 23OV. 50cy/s, with thermal overload protection wall mounted

with height adjustment and rotary tilting device complete with guard, pull cord for

speed and oscillation flexible Core plug top complete erected with lead wires as

directed. (a) 450 mm

PUMPING MACHINERY

48 Supplying & erecting approved make self-priming domestic monoblock water pump 1.00 Each 7603.00 7603.00 9-3-2 ]

with 1 H.P motor, suitable for operation on 230 volts, 50c/s. AC supply with metallic

flange, and M.S. impeller delivery and following discharge. For (a) 40 LPM at

mtrs. head suitable for 25mm dia. Delivery (i) 1.0 HP to 5.0 HP.

49 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible 50.00 Mtr. 103.00 5150.00 9-7-1 [b]

Submersible copper cable approved make of 3 Core x 2.5 Sq. mm. Size.

50 Supplying, Installing, Testing and commissioning of IP CCTV camera (Dahuva

Make) with night vision, full HD, Water proof (Matel or Plastic body) minmum

(a) 32 Channel NVR 1.00 No. 24799.00

(b) 16 TB hard Disk (Survilance) for data storage 1.00 No. 36799.00

(c.) CCTV Cable 500.00 Mtr. 20.00

(d) DOM type CCTV Camera 12.00 No. 5000.00

Sr. No. Item Description Qty. Unit Amount

(e.) Bullet type CCTV Camera POINT WIRING AND MAINS / EARTHING 6.00 No. 7000.00

51 Display TV (50 inch) 1.00 No. 50000.00

Je Store D.E.-T2

Dn-2,Amreli Dn-2,Amreli