Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.2 LAccepted-AOC | L1 | Accepted-AOC 1ST LOWEST | |
| 2 | L2₹17.1 L+₹71,277.80 (4.36%)Rejected-Finance C O MODERN FURNITURE B I BAZAR BAREILLY CANTT BAREILLY 243001 UP | BAREILLY | BAREILLY | UP | 243001 | L2 | Rejected-Finance 2ND LOWEST | |
| 3 | L3₹17.2 L+₹83,693.36 (5.11%)Rejected-Finance | L3 | Rejected-Finance 3RD LOWEST | |
| 4 | L4₹19.2 L+₹2.8 L (17.0%)Rejected-Finance | L4 | Rejected-Finance 4TH LOWEST | |
| 5 | L5₹24.2 L+₹7.9 L (48.0%)Rejected-Finance FLAT NO 151 BLOCK NO 1 DIAMOND SQUARE CGHS LTD PLOT NO 13A SECTOR 6 DWARKA NEW DELHI 110075 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110075 | L5 | Rejected-Finance 5TH LOWERST |
Tender Value
Refer Docs
EMD Value
₹34,800
Closing Date
9 Nov 2020, 6:00 pmClosed
GE EAST BAREILLY
Garrison Engineer East Military Engineer Services Shahjahanpur Road Bareilly Cantt
MANNING AND OPERATION OF WATER SUPPLY INSTALLATION INCLUDING REPAIR WORK OF SUBMERSIBLE PUMPING SET SEWAGE PUMPING SETS OF WATER SUPPLY INSATALLATION AT RTS DEPOT HEMPUR UNDER GE EAST BAREILLY
2020_MES_384788_1
C/8877/E8
Open Tender
Miscellaneous Works
Item Rate
334 days
GE EAST BAREILLY
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
Yes
GE EAST BAREILLY
₹34,800
Yes
20 Nov 2020
8 Oct 2020
11 Nov 2020
8 Oct 2020
9 Nov 2020
28 Oct 2020
8 Oct 2020 - 20 Oct 2020
Amount
Manning and operation of following installation (all located at one place) in three shifts of 8 hours each with one operator per shift continous for seven day in a week including sunday/Holiday at PH No 2 consisting of following machineries for water supply including valves & pipe lines:- (a) Bore well with submersible of pumping set capacity 15 HP, 415 Volts 50 Hz, -01 No (b) Booster pump of mono block/centrifugal type with electric motor of cap-25 HP 415 Volts. 50HZ - 02 Nos. (c) Gaseous chloronome plant - 01 N0 (d) DG set with electric control panel - 01 No.
Minimum wage of trademan as per prevailing Notification by the Govt of India or State Govt whichever is higher.
Employees State Insurance Contribution as per prevailing Notification by the Govt of India. Or State Govt whichever is high.
GST as per prevailing Notification by the Govt of India.on Srl No( 1.1+ 1.2) above
Labour welfare cess as per prevailing Notification by the Govt of India.on Srl No( 1.1+ 1.2) above
Over head and profit of the contractor on Srl No (1.1 +1.2+1.3+1.4)above
Manning and operation of following installation in two shifts of 8 hours each with one operator per shift continuously for seven days in a week including sunday/Holiday at pump house No 4 consisting of the following machineries including valves and pipe lines:- (a) Bore well with submersible pumping set of capacity 15HP, 415 Volts 50 Hz - 01 No. (b) DG set with electric control panel - 01 N0. (c) Gaseous chloronome plant - 01 No
Minimum wage of trademan as per prevailing Notification by the Govt of India or State Govt whichever is higher.
Employees State Insurance Contribution as per prevailing Notification by the Govt of India. Or State Govt whichever is high.
GST as per prevailing Notification by the Govt of India.on Srl No( 2.1+ 2.2) above
Labour welfare cess as per prevailing Notification by the Govt of India.on Srl No( 2.1+ 2.2) above
Over head and profit of the contractor on Srl No (2.1 +2.2+2.3+ 2.4)above
Manning and operation of following installation in one shift of 8 hours with one operator continuously for seven days in a week including sunday/Holiday at pump house No 3 consisting of the following machineries including valves and pipe lines:- (a) Bore well with submersible pumping set of capacity 15HP, 415 Volts 50 Hz - 01 No (b) Booster pump of mono block/centrifugal type with electric motor of cap-25 HP 415 Volts. 50HZ - 02 Nos (c) DG set with electric control panel - 01 N0. (d) Gaseous chloronome plant - 01 No Note :- For Serial item No. 1 to 3 (i) The potable water will be treated by running of chloronomes plants/Altoch dosing plants by maintaining 2 PPM at OH tanks including Maintenance and servicing of gaseous chloronome plant vacuum type liquid chloronome plant( Altoch plant), daily checking the smooth operation and functioning and rectifying all the defects, adjusting the gas dozer properly. Maintaining the record once in a day at all pumps and contractor will be responsible for complete repairing all gas leaking points including all minor repairs and replacement of minor parts such as seals, packing, nuts, bolts, adopters etc and smooth functioning of gaseous chloronome plants. Log sheets and other periodical maintenance records will be completed as per direction of Engineer-in-Charge . Note: - No extra payment will be made for minor parts consumable (ii) the rates are required to be quoted taking in to consideration of latest Govt order and in this regard also refer SchA notes on Page no 15 TO 20 of tender documents (iii) Bleaching powder, puri chlor, chlorine gas will be issued by the department and collected by the contractor
Minimum wage of trademan as per prevailing Notification by the Govt of India or State Govt whichever is higher.
Employees State Insurance Contribution as per prevailing Notification by the Govt of India. Or State Govt whichever is high.
GST as per prevailing Notification by the Govt of India.on Srl No( 3.1+ 3.2) above
Labour welfare cess as per prevailing Notification by the Govt of India.on Srl No( 3.1+ 3.2) above
Over head and profit of the contractor on Srl No (3.1+3.2+3.3+3.4)above
Disconnecting from electric connection carefully the motor from penal board and lifting the submersible pump and motor from bore well including all etc and removing the same to the location (inside/ outside building) complete all as directed .
Dismantling the submersible pump assembly capacity 15 HP completely, checking and segregating serviceable/unserviceable parts, cleaning serviceable parts thoroughly by approved method, replacement of wron out parts including necessary lath / machinery work including all new parts as reqd, re-assembling the pump completely lowering the pump alongwith all accessories to the existing location, overhauling, commissioning, testing and connecting up complete including painting all as specified and directed .(NOTE: spare parts shall be measured and paid separetely as supply only of the following )
Supply only Discharge outlet
Supply only Stage casing
Supply only Pump shaft
Supply only Key for impeller
Supply only Key for pump coupling
Supply only Bearing sleeve
Supply only Stage Bowl bush
Supply only DOL Bush
Supply only Nut Stud kit
Supply only NRV
Dismantling , cutting and removing the burnt windings from the submersible motor of capacity 15 HP, rewinding with suitable size/gauge of super enameled/copper conductor and other approved insulating materials, heating, drying and replacement of existing size of submersible cable including varnishing, overhauling, reassembling the motor, installing, commissioning, testing and connecting up complete all as specified and directed.(NOTE: spare parts shall be measured and paid separetely as supply only of the following )
Supply only Oil Seal Set
(Supply only `O` ring set
Supply only Motor bearing Bush set
Supply only Complete Pad set (Bearing assembly)
Supply only Rotor sleeve set
Supply only Thrust plate with ferredo lining
Supply only Upper/Lower bearing house
Supply only Balancing ring
Disconnections of electric connection of centrifugal pump and motor capacity of 25 HP, lifting and removing motor form its existing foundation to the location (in side/outside of building) where directed by the Engr-in-charge. Dismantling the pump and motor of capacity 25 HP, carefully checking, segregating serviceable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like stator, rotor, terminal box, bearings shaft, key etc) heating, drying & varnishing including replacement of burnt winding for 25 HP motor with super enameled copper wire of existing gauge and good quality of insulating materials including replacement of unserviceable parts as required including necessary lath/machining work. Reassembling the pump and motor including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed. .(NOTE: spare parts shall be measured and paid separetely as supply only of the following )
Supply only 25 HP Pump Bearing No 6310 or suitable size
Supply only Pump bearing seat suitable for 3 ph 25 HP motor
Supply only Motor side cover suitable for 3 ph 25 HP motor
Supply only Motor connected plate six hole suitable for 3 ph 25 HP motor
Supply only 25 HP Motor Bearing No 6308 or suitable size
Supply only 25 HP Motor Bearing No 6309 or suitable size
Supply and fix Fully Automatic Star Delta Starter with Single Phase Preventer, 3 phase 415V 50 Hz suibtable for 15 HP Submersible Pump and Motor complete with Over load tripping circuit (Max relay (14-23 Amp), Reverse phasing , unbalancing, Low voltage , high voltage upto motor terminal and starting time delay and should be housed in Dust proof, Moisture proof and powder coated sheet metal fabricated box with locking arrengement with extra long life contact with arrengement and making necessery connection in panel and pump set including taking down of existing starter complete all as specified and directed ..
Supply and fix Fully Automatic Star Delta Starter with Single Phase Preventer, 3 phase 415V 50 Hz suibtable for 25 HP Centrifugal Pump and Motor complete with Over load tripping circuit (Max relay (20-33 Amp), Reverse phasing , unbalancing, Low voltage , high voltage upto motor terminal and starting time delay and should be housed in Dust proof, Moisture proof and powder coated sheet metal fabricated box with locking arrengement with extra long life contact with arrengement and making necessery connection in panel and pump set including taking down of existing starter complete all as specified and directed .
Supply and fix DOL starter three phase 415 volt 50 Hz push button type suitable for 05/7.5 HP centrifugal pump set with arrangement and making the necessary connection in panel and pump set including taking down of existing starter complete all as specified and directed.
Material and Labour for cleaning of under ground sump of capacity 10000 Glns at RTS & Depot complete with:- (a) Cleaning of water tanks with high pressure water jet with pressure not exeeding 28Kg/Sqcm and remove all masses algae and dirt. (b) Removal of dirty water alongwith sludge using sludge machines and disposal of the same to a safe distance. (c) Scrubbing of floors using industrial vacuum cleaner. (d) Applying of anti bacterial sterilization to walls floors and roofs of tanks. (e) Removing of all vegitation near by to UG tank and thrown to 50 meters away.
Material and Labour for cleaning of over head Reservoir of capacity 10000 Glns of height up to 21mtr complete with :- (a) Cleaning of water tanks with high pressure water jet with pressure not exeeding 28Kg/Sqcm and remove all masses algae and dirt. (b) Removal of dirty water alongwith sludge using sludge machines and disposal of the same to a safe distance. (c) Scrubbing of floors using industrial vacuum cleaner. (d) Applying of anti bacterial sterilization to walls floors of sump. (e) Removing of all vegitation near by to OH tank and thrown to 50 meters away.
All as per item No 13 here-in-before but over head reservoirs of capacity 25000 Glns at RTS & Depot.
Supply only calcium Hydrochloride 65.70% (High strength calcium based granular chlorination chemical) more stable than Chlorine Gas and free from toxicity and safe for drinking water : Make Aquafit/PURICHLOR (Sree Rayalaseema) or equivalent (Make as Approved by GE.
M&L for carrying out general servicing and repairs to Engine of DG set of the following capacity installed at variouse pump house at RTC & Depot Hempur including servicing of water pump, replacement of unserviceable spares, carrying out 'B' Check as per manufacturer's recommendations including replacement of oil filters, fuel/diesel filters with 'O' rings, Turbo fileter, super bypass filter and Engine Oil and toping up of coolant up to required level complete all as specified and as directed for 125 KVA DG set Notes : (i) Supply only Engine Oil and coolant shall be measured and paid separetely. (ii) Rate quoted is inclusive of Oil filters, diesel filters with O rings, hose/diesel pipe with clamp and turbo filter.. (iii) All the spares require replacement during servicing shall be measured and paid separately as 'Supply only' (iv) Servicing of Radiator & self starter shall be measured and paid separately
All as per item no 16 above but 63 KVA DG set
All as per item no 16 above but 40 KVA DG Set
All as per item no 16 above but 30 KVA DG Set
All as per item no 16 above but 25 KVA DG Set
Supply only Air cleaner/filter of existing size suitable for 125 KVA DG Set .
Supply only Engine oil 15W-40 or as per manufacturer's recommendation.
Supply only Radiator Coolant
M&L for Cleaning and servicing of radiator assembly including cooler of the capacity DG Set upto 125 KVA by circulating de-scaling solution including repairs and replacement of worn out rubber hoses with clamps, mounting boots and bolts, recrification of leakages by welding/ brazing etc. complete all as directed.
M & L for supply and fixing against repairs Automatic Voltage Regulator (AVR) suitable for uptp 125 KVA, connecting with panel circuit, starting and testing on load all as specified and directed by Engineer-in-charge
Supply and replacement lead acid battery 12 V 180Ah complete (Initially charged) and connected to DG sets complete all as directed
Taking down UNSV Motor Protection Relay and Supply & replacement of Electronic Motor Protection Relay with in-built earth fault protection (Model No MPR300) suitable for 15/25/35 HP submersible pumping set motor
Taking down UNSV Overload protection relay and Supply & replacement of overload protection relay for FASD starter ranging 28-42/30-35 Amp .
Taking down UNSV Amp Meter and S&F Digital type ampere meter of size 96x96mm with CT 100/5 Amp,AC,3 phase,415 volts complete all as specified & directed.
Taking down UNSV voltmeter and S&F Digital type voltmeter of size 96x96mm AC, 3P, 415 volts complete all as specified and directed.
Supply and fix of contactor for Starter MNX 32 including suitable Front Add-on aux. contact Block
Supply and fix of Electronic Timers Type ST 100, 240/415 V, 50 Hz of range 03-30 secs, complete all as specified and directed.
Supply and fix of flat type 6 Sqmm three core, PVC sheathed copper conductor cable suitable for submersible pump and motor, complete all as specified and directed.
M&L for applying one coat of olive and black paint over a coat of red oxide primer externally of MS/GI/CI pipe line for pump & motor and over head tank with arrow mark for up or down of size 100 / 150 mm dia of bore including scraping existing treatment complete all as specifed and as directed. Note :- Tenderer may note that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract
D K THUKRAL AND SONS
IK ONKAR ENGINEER AND CONTRACTOR
M/S MAISUR CONSTRUCTION COMPANY PRIVATE LIMITED
BRIJ MOHAN LAL AND CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .