PROVISION OF FURNITURE YARD ADDN/ALTN TO SINGLE INLIVING EPs DINING HALL KITCHEN AND ONE WATCH TOWER AT 2.40 ACRE CG LAND UNDER DHQ NO 15 AT OKHA UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil

Excavating over area n.exc 1.50 mtr deep and getting out in hard/dense soil

Excavating over areas exc 1.50 mtr and not exc3.00 mtr deep and getting out in hard/dense soil

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft / loose soil all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified.

Spreading & levelling in layers not.exceeding 25 cm thick well ramming including watering as required.

M&L River sand Filling Under Floors or in foundation including watering and consolidation

Removing excavated material to a distance n exc. 50 m and depositing where directed at a level n exc. 1.5 m above from the starting point complete all as specified and as directed by engineer-in-charge.

M&L Hardcore of guage not exceeding 63mm, deposited spread & levelled in layers n.exc.15CM thick, watered & rolled/ rammed to a true surface using broken stone or boulders all as specified and as directed by engineer-in-charge.

M& L Moorum filling in floors or pavings , laid in layers not exceeding 15 cm thick , spread,levelled and rammed including watering complete all as specified.

M&L Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area all as specified and as directed.

M&L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured all as specified and as directed.

M&L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface all as specified and as directed.

M&L Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall all as specified and as directed.

M&L Plain cement concrete, type D2, (1:4:8 using 40mm graded stone aggregates) as in foundation, filling and mass concrete etc all as specified and as directed.

M&L Plain cement concrete type B-1 ( 1:2:4, using 20 mm graded stone aggregates) as in window and door cills, lintels, bressumers, steps, quoins, manhole cover slabs, of any thickness, with plain fair faces including chamfering weathering, throatings etc including necessary form work, complete all as specified and directed.

M&L Precast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in manhole cover slabs, of any thickness, size or shape including necessary form work, set and jointed in cement mortor (1:4) complete all as specified and directed.

M&L Precast cement concrete block masonary, type C1 (1:3:6, using 20mm graded stone aggregates) with solid blocks, exc 10cm in width and setting in cement mortar 1:6, complete all as specified and directed.

M&L Precast cement concrete block masonary, type C1 (1:3:6 using 20mm graded stone aggregates) with solid blocks 10 cm thick (with plain or interlocking joints ) and setting in CM 1:4 complete all as specified.

M&L RCC (Design mix), ,M-30,, using 20mm graded stone aggregates as in foundation including raft footing, foundation beam plinth beam bases for columns etc complete all as spacified.

M&L RCC (Design mix),M-30,, using 20mm graded stone aggregates as in slabs supported onwalls, beams and colums in floors, roofs, landings, balconies, canopies ,deck slabs and in shelves and the like complete all as specified and directed by Engr-in-charge, complete all as spacified.

M&L RCC (Design mix),M-30, using 20mm graded stone aggregates as in Chajjas,complete all as spacified.

M&L RCC (Design mix),M-30, using 20mm graded stone aggregates as in lintels, beam etc over 1.5 mtr span, complete all as spacified.

M&L RCC (Design mix),M-30, using 20mm graded stone aggregates in Columns,pillars

M&L RCC (Design mix),M-30, using 20mm graded stone aggregates as in staircases including steps (square or spandril) string pieces,carriages,etc., complete,any section straight or winding,but excluding landings

M&L RCC (Design mix),M-30, using 20mm graded stone aggregates as in fins,fascias,louveres,parapets and railings exc 60 cm in height,newels,balustrade and the like

Supply only water proofing compound

M&L 40mm thick DPC in Plain cement concrete type B-0, (1:2:4, using 12.5mm graded stone aggregates) to horizontal or vertical surfaces including necessary formwork.

Formwork to sides of concrete foundations, footings,bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work;vertical or to batter,curved, as in rough finished surfaces of concrete complete all as specified and as directed at site.

Formwork to faces of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter for fair finished surfaces.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for fair finished surface (Horizontal or sloping) etc complete all as specified and directed by Engr-in-charge.

Formwork to soffits of suspended slab such as curved roof slab ,floor slab landing and similer work not exceeding 200mm thick (horizontal or sloping),complete all as spacified at site

Formwork to chullah hoods, chajjas, troughs and similar items including edges

Formwork to sides and soffits of roof beams,haunchings, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs also splays between floor and beam and the like for fair finished surfaces of concrete etc complete all as specified and directed by Engr-in-charge.

Formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing),complete all as spacified.

Form Work To Sides of pillars, posts, struts, piers, columns (square, rectangular or polygonal) as in fair finished surfaces of concrete complete all as specified and directed.

Formwork to edges of concrete flats exc . 20 cm but n.exc. 10cm wide

Form work to edges of concrete flats,treads,break in floor, window cills, concrete railings, opening in concrete walls and sides of RCC / Plain cement concrete bands in walls, horizontal or sloping and all similar work all exceeding 5cm but not exceeding. 10cm wide for a fair finished surface complete all as specified and directed.

M&L 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 35mm thick Glazed and skeleton shutters open rebated and prepared to receive glass guage etc without sash bars edges of framing plain chamfered or rounded, fitted with cut and mitered beads with size of beading 15 x 10mm, for securing glass etc size of members of shutters complete all as specified and directed.

S&F 35mm thick Factory made plain frame panelled shutter (two panel) with lock rail using 2nd class HW (Hollock) kiln seasoned andchemically pressure treated the size of rail and style as per IS 1003 (Part-I) and panel insert of 9mm thick BWP commercial facing plywood or 12mm veneered particle boards with commercial ply all as specified

S&F Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like inclding all necessary labours, articles n.exc. 200 Cu Cm each complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each and removal from site, all as specified and directed

Taking down chowkats or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm each and not exc 4.00 Sqm each and removal from site, all as specified and directed

S&F 150mm long Aluminium anodized barrel tower bolts of extruded section of bolt (ISI Marked) complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (ISI Marked) (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F 100 mm long extruded aluminium alloy anodised Butt hinges (ISI Marked) complete all as specified and directed.

S&F 150 mm long Extruded aluminium alloy handles, fabricated type,anodised (ISI Marked) complete all as specified and directed.

S&F 20mm dia Powder coated aluminium anodized Drappery rod fancy type with finials on both ends including all fixing clamps/brackets fixed to wall for doors and windows all as directed and specified.

S&F 140mm long Anodised Aluminium Floor door stopper of body and tongue, with hard drawn steel spring,fixed in floor overall length of cover plate

S&F Die cast Aluminium door closer,hydraulically regulated, exposed, tubular type (Type B) designation No.3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed..

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm all as specified

S & F Mild steel work as in framed work such as grills,gratings,etc., with ends of bars shouldered and/or riveted,or forged into spikes: framed guard bars; barred iron doors;ladders;framed balusters;walkways;railings;framework of watertanks and similar work confirming to Fe.290.Gde-E-165 all as specified

S & F Mild steel work as in holdfasts, bands, straps, hooks, etc.

M&L Mild steel CRS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips. etc complete all as specified and directed by Engr-in-charge.

M&L Mild steel CRS TMT bars 8 mm dia Round Bars cut to length bent to shape required including cranking bending spirally for hooping for colums hooking ends and bending with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr-in-charge.

All as per above item No.56.00 but 5mm dia and over upto 10mm dia as in stirrups, spacers and binders etc complete all as specified and directed by Engr-in-charge.

M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2kg/m2 incl cleaning surface all as specified and directed

M&L APP Based Polymeric memberane minimum weighing 3 kg /sqm and minimum 3mm thick Reinforced with polyster non wove fabric (wt not less than 150 gms/ sqm) land on primed surface by forced application complete all as specified and Directed by Eng-in- Charge

M&L 75 mm thick, Plain cement concrete, type C2, (1:3:6, using 40mm graded stone aggregates) as in plinth protection finished fair and even without using extra cement. complete all as specified and as directed by Engr-in-Charge.

M&L 75mm thick, Plain Cement concrete, type D-2, 1:4:8 (using 40mm graded stone aggregates) as in sub base of floors even and rough finished to receive topping layer complete all as specified and as directed by Engr-in-Charge.

M&L Joint free non - skid coloured ceramic tiles 7 to 8 mm thick, (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in coloured cement to match complete all as specified and as directed by Engr-in-Charge.

S&F Joint free coloured glazed ceramic tiles 350 x250 x7 mm/450 x350 x7mm/450x300mmx7 mm /250x375x7mm thick on vertical surfaces including 10mm thick backing coat in CM 1:4 such as skirting dados and riser to step etc set jointed in neat cement slurry and pointed in white cement to match complete all as specified and as directed by Engr-in-Charge.

M&L 40 mm thick, Plain cement concrete, type B-1, (1:2:4, using 40mm graded stone aggregates) as in floors and pavings finished even and smooth without using extra cement. complete all as specified and as directed by Engr-in-Charge.

M&L Double charged Vitrified tiles 9 to 10 mm thick light shade (square/ rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and white or coloured cement to match over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match as in floor etc , all as specified and directed by Engr-in-charge.

M&L Double charged Vitrified tiles 9 to 10 mm thick light shade (square/ rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm in verticle surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match over backing bedding layer 10mm thick 1:4 and pointed in white or coloured cement to match etc complete all as specified and directed by Engr-in-charge.

Dismantling floor ,hearth or wall tiling including cement mortar bedding(but not backing removing serviceable tilles to store and rubbish off the premisses

S & F 38 mm wide,3 mm thick Glass dividing strips.

M&L 10mm thick rendering in CM 1:3 on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L 15mm thick rendering in CM 1:6 on other than fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L 10 mm thick rendering in CM 1:6 on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L 5 mm thick rendering in CM 1:4 on fair faces of concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L 15 mm thick cement plaster in CM1:4 in two coats, (10 mm thick rendering coat in CM 1:4,5mm thick second coat mixed with water proofing compound as per manufacturer instruction) on fair faces of brickwork/concrete work finished even & smooth without using extra cement. Note ;- WPC will be measured and paid seperately under respective item.

M&L Rendering 5mm thick in CM 1:3 on concrete surfaces on ceiling finished even and smooth without using extra cement all as specified

M&L Rendering 15 mm thick in CM(1:4) mixed with water proofing compound on fair faces of roof concrete work finishing even & smooth without using extra cement. Note : WPC will be measured and paid seperately under respective item.

M&L Machine cut Kota stone slab flooring 20 to 25 mm thick over cement screed base, 15mm thick in cm 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Machine cut Kota stone slab flooring 20 to 25 mm thick, but fixed in risers of steps, skirting, dado and pillar laid over cement screed base 1:3, 10mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L 3 mm thick wall care cement based putty in layers and making the surface even and smooth.

M&L Preparation of new plastered surfaces of walls and applying two coat of Cement based paint over a coat of alkali resistant primer complete all as specified.

M&L Preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified.

M&L Preparation of new plastered surfaces of any wall/ceiling surfaces and applying two coats of oil emultion distemper over a coat of primer all as specified

M&L Applying two coat of Exterrior acrylic emulsion of approved tint over undecorated plastered surfaces including preparation on walls etc all as specified and as directed.

S&F 4 mm thick Sheet glass ordinary quality as in glazing with oil putty in square n.exc 0.50 Sq.m in each pane complete all as specified and as directed.

S&F 4 mm thick Sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sq.m in each pane complete all as specified and as directed.

S&F Solar control film 25 micron reflective type (gareware sun control or equivalent), complete all as directed at site.

M&L Preparation of new wooden surfaces & applying two coats of synthetic enamel paint over one coat of pink primer over 10 cm width or girth,complete all as directed at site.

M&L Preparing surfaces of new wood and wood based materials,of any description and girth,not otherwise described,and treated with tar or coal tar black paint, complete all as directed at site.

M&L Treating backs of chowkats with tar or coal tar black paint area exc 0.1sqm but n exc 0.5 sqm each post all as specified and directed

M&L Treating small articless such as holdfasts,treating backs of chowkats etc., with tar or coal tar black paint area n.exc 0.1sqm all as specified and directed

M&L Sanding newly tarred or painted surfaces with clean sharp sand as directed.

M&L Preparation of surfaces of any description over 10 cm girth or width ,not other wise described and applying one coat of bituminous aluminium paint

S&F 16mm dia, 3-layer, PP-R (Poly propylene random copolymer) pipes SDR-7, UV stabilised and antimicrobial fusion having thermal stability for hot and cold water supply including all PP-R plain and brass threaded poly propylene random fittings (such as elbow, tee, reducers, couplers, short pieces, connections, union etc,.) whatever required as per manufacturer instruction fixed on walls/ceilings complete all as specified and directed

S&F 20mm dia, 3-layer, PP-R (Poly propylene random copolymer) pipes SDR-7, UV stabilised and antimicrobial fusion having thermal stability for hot and cold water supply including all PP-R plain and brass threaded poly propylene random fittings (such as elbow, tee, reducers, couplers, short pieces, connections, union etc,.) whatever required as per manufacturer instruction fixed on walls/ceilings complete all as specified and directed

S&F 500 Litre three layered capacity rotational moulded polythylene water storage tanks (cylindrical, vertical with closed top ) hoisted and fixed in position all as specified and directed including provision of 200mm long 50mm bore GI nipples for inlet, outlet, overflow, drain out pipe including provision of check nuts. Make: SINTEX/Equivalent

S&F 15 mm bore Bib taps cast copper alloy, fancy type, Chromium Plated with capstan head screwed for iron pipe or brass ferrule all as directed by Engineer-in-Charge

S&F 15mm Bore Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed by Engineer in Charge.

S&F 15mm Bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F 15mm Bore concealed stop valves, cast copper alloy, Chromium plated with long shank and cup, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed.

S&F 15 mm size PVC connection with PTMT nuts of length 450 mm of approved quality

S&F 450mm long Towel rails of PTMT fixed with and including CP brass screw screws and wooden cleats minimum weight 170 gms

S & F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, in floors, fixed to walls all as specified.

S & F 110mm dia PVC (SWR) bend of any radius complete all as specified and directed.

S&F 110mm dia PVC (SWR) vent cowl

S&F 32mm dia, Brass chromium Plated Bottle Traps for wash basins with inlet and outlet screwed for pipe or connection including necessary packing union, cap and fixed complete all as specified and directed

M&L 100 mm dia Cast iron floor trap with grating, jointed to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

M&L 150mm bore Concreting bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in Plain cement concrete type D2 (1:4:8,using 40mm graded stoen aggregate) complete all as specified and directed.

M&L 150mm bore Salt glazed stone ware drain pipes, Grade A, laid and jointed all as specified

M&L Salt Glazed Stone Ware gully trap 150 x 150mm size , square or round mouthed,type-P complete all as specified and directed.

Cutting into existing manhole/Septic Tank for connecting new drain pipe of 150mm dia and making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4) section in cement concrete 1:2:4 type B1,smooth finished and reforming benching , all as required.

S&F Vitreous china wash hand basin, white, flat back, of size 450 x 300 mm including waste chain and plug or porcelain stopper but including cutting for and pinning in ends of brackets all as specified and directed.

S&F Steel sink with drainage board make of stainless steel 1 mm thick kitchen with plugs, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe. Over all size 915 mmx 460, bowl size 410mm x 330 x 160 mm.

S&F Soap Dish Stainless steel chromium plated decorative type approximate size 160x160x90mm complete all as specified and directed.

Demolition of stone /boulders masonary work built in CM including all quoins, arches, pillars etc & removing from site.

Demolition of PCC (unreinforced) as in ground floors & paving n.exc 15 cm thick (below or above GL) and disposal upto a distance n.exc 100m where directed

Demolition of RCC of any descrition and in any position not other wise specially provided for complete all as specified and directed (reinforcement cut as required to facilitate demolition)

S&F Aluminium grill with suitable aluminium anodised frame F/H section manufactured by M/s DECO GRILL as per design No DG-104, 5.5mm to 6.5 mm thick with necessary channels and clips complete all as specified and as directed by Engr-in-Charge.

S&F 100mm long Stainless steel Butt hinges (ISI Marked) complete all as specified and directed.

S&F powder coated Anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, shutters, sliding windows and windows ventilators with or without rebates including joining cleats for fixing etc. complete all as specified and as directed by Engr-in-Charge.

S&F Neoprene rubber beading of U or C section suitable for 5mm thick glass fixed along with edges of aluminium glass panes of joinery, all as directed by Engineer-in-charge.

S&F UPVC, double flat / groove type, roller for sliding windows all as directed by Engineer-in-charge. Note: Rollers shall conform to the samples kept with the Engineer-in-Charge.

S&F 100mm long powder coated Aluminium starlock for sliding window shutters conforming to the samples held in the office of Engineer-in-charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and Labour for Point wiring complete with 1.5 sqmm single core PVCinsulated but unsheathed multistranded copper conductor FRLS cable 1100 Volts grade drawn through and including PVC heavy duty conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessedin wall / On surface of roof ceiling etc including 1.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame for modular switches, sockets,switch sockets for one light or fan point controlled by one switch complete all as specified and as directed by Engineer-in-Charge. Note: Cost of cutting / chasing on wall and making good after repair shall be measured and paid seperately. Make of cable: Havells/ Finolex/ RR Kable/ KEI

All as per item no 126 but One 3 pin socket outlet 5 amps on the same board

All as per item no 126 but One 3 pin 6 Amps socket outlet on independent board .

Material and Labour for Point wiring complete with 2.5 sqmm single core PVCinsulated but unsheathed multistranded copper conductor FRLS cable 1100 Volts grade drawn through and including PVC heavy duty conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessedin wall / On surface of roof ceiling etc including 2.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame for modular switches, sockets,switch sockets for one 3 pin 15 or 16 Amps on independent board with required modules complete all as specified and as directed by Engineer-in-Charge. Note: Cost of cutting / chasing on wall and making good after repair shall be measured and paid seperately. Make of cable: Havells/ Finolex/ RR Kable/ KEI

Supply & fix in repair modular switch 1 way, 6 Amps, 1 modular (ISI marked).complete all as specified and as directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S&F Modular type 2/3 pin combined 6 A socket Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S&F in repair Modular Switch 16 A, one-way, one module (ISI Marked) complete all as specified and directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

M&L Ceiling rose, 3-Ph/ PVC /polycarbonate, isolated body complete all as specified and directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S&F Socket 6A/16A - 2/3 pin combined,2 module (ISI Marked) complete all as specified and directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S&F in repair modular fan regulator, 120 watt, 2 moduler (ISI marked).complete all as specified and as directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S&F in repairs 18W Surface/Wall mounted Batten LED Luminaire with high efficiency long life LED chips, CRI=80(Minimum) PF>.95, System luminous efficacy >100, Operating voltage 140V-270V including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to LED fitting Complete all as spd and directed. Make : Wipro (Trim LED NEO LL20-221-XXX-65-NE)/ Philips(astra)/Osram (Luxsmart batten

S&F 20W Surface/Wall mounted LED Luminaire , with high efficiency long life LED chips, CRI=80(Minimum) PF>.95, System luminous efficacy >100, Operating voltage 140V-270V including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to LED fitting Complete all as spd and directed. Make: Bajaj Cat No BLTRU 20W WH VIVA/ Philips Cat No BN 308C-LED-2220S-6500/ Osram cat No Luxpower Batten 19WL840.

S&F 25 W surface / wall mounted LED security light, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to LED Fitting with luminaire mounting arm complete all as specified and directed Make Philips/ Wipro/ Osram

S&F MCB Distribution box, 04 way for MCB SPN, 415 Volts, double door powder coated sheet metal enclosure confirming to IP 43 including standard bus bar fixed on existing bricks/stone wall in semi-concealed type complete all as all as specified and as directed by Engineer-in-charge. Make- Legrand/Schneider/Hager/ L&T

S&F MCB Distribution box, 04 way for MCB TPN, 415 Volts, double door powder coated sheet metal enclosure confirming to IP 43 including standard bus bar fixed on existing bricks/stone wall in semi-concealed type complete all as all as specified and as directed by Engineer-in-charge. Make- Legrand/Schneider/Hager/ L&T

S&F MCB Distribution box, 06 way for MCB SPN, 415 Volts, double door powder coated sheet metal enclosure confirming to IP 43 including standard bus bar fixed on existing bricks/stone wall in semi-concealed type complete all as all as specified and as directed by Engineer-in-charge. Make- Legrand/Schneider/Hager/ L&T

S&F MCB Distribution box, 08 way for MCB SPN, 415 Volts, double door powder coated sheet metal enclosure confirming to IP 43 including standard bus bar fixed on existing bricks/stone wall in semi-concealed type complete all as all as specified and as directed by Engineer-in-charge. Make- Legrand/Schneider/Hager/ L&T

S&F MCB SP 5/32 Amps 10 KA rupturing capacity 'C' curve complete all as specified and as directed by Engineer-in-Charge. Make: L&T/ C&S/ Legrand/ Schneider

S&F MCB four pole,415V, 40 Amps 10 KA rupturing capacity 'C' curve complete all as specified and as directed by Engineer-in-Charge. Make: L&T/ C&S/ Legrand/ Schneider

S&F MCB four pole,415V, 32 Amps 10 KA rupturing capacity 'C' curve complete all as specified and as directed by Engineer-in-Charge. Make: L&T/ C&S/ Legrand/ Schneider

S&F MCB SPN 6/16 Amps 10 KA rupturing capacity 'C' curve complete all as specified and as directed by Engineer-in-Charge. Make: L&T/ C&S/ Legrand/ Schneider

S&F MCB SPN 16-63 Amps 10 KA rupturing capacity 'C' curve complete all as specified and as directed by Engineer-in-Charge. Make: L&T/ C&S/ Legrand/ Schneider

Taking down existing sub main wiring complete, including fixture and fittings removing materials to store for keeping in safe custody or for taking on credit and making good disturbed surfaces of walls, floors, etc Note: Cost of Making Good of existing disturbed surface deemed to be included in unit rate.

M&L Sub main wiring with two runs of 6.0 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 Volts grade cable fire retardant low smoke drawn through and including PVC concealed conduit heavy duty grade ISI marked 25mm dia (external) including conduit accessories like bends, tees, junction boxes etc including 6.0 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire fixed complete all as specified and directed. Note: Cost of cutting / chasing on wall and making good after repair shall be deemed to be included in quoted rate . Make of cable: Havells/ Finolex/ RR Kable/ KEI

M&L Sub main wiring with two runs of 4.0 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 Volts grade cable fire retardant low smoke drawn through and including PVC concealed conduit heavy duty grade ISI marked 25mm dia (external) including conduit accessories like bends, tees, junction boxes etc including 4.0 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire fixed complete all as specified and directed. Note: Cost of cutting / chasing on wall and making good after repair shall be deemed to be included in quoted rate . Make of cable: Havells/ Finolex/ RR Kable/ KEI

Taking down Ceiling fans complete servicing, and replacement of worn out minor parts and hanging of ceiling fan/fixing or exhaust fan including painting with synthetic enamel paint by spray M/achine (with cumulative cost of spares not exceeding Rs.50 per each fan) including filling cavities with filler in situ all as specified and directed.

M&L Earthing complete with galvanized steel earth plate electrode including necessary excavation and earth work in any type of soil with galvanized steel earth plate electrode size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanized earth strip 32X6 mm by means of bolts nuts check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part-1 connected to main switch board or main control board all as specified and testing on completion including provision of earth strip protected by galvanized iron 40 mm dia. light grade pipe and watering pipe shall be 20 mm bore medium grade PCC pit with pre cast RCC cover, charcoal/salt funnel etc. complete all as directed. Note: Item includes the cost of 7.5 m GI pipe for protection of earth strip

S&F 300mm sweep Exhaust fan 240 V AC,50 Hz, Single phase, 1400 RPM, heavy duty industrial type,metal body fixed as per manufacturers instruction, connecting with and including 2 corex0.5 Sqmm copper coduct PVC insulated and PVC sheathed three core cable complete. Make: CG,Havells(Ventil Air), Bajaj (Bahar)/ ORIENT (HILL AIR )/USHA (AERO)

Supply, lay, Joint and test 2 Core 10sqmm XLPE insulated, Extruded PVC outer sheath and inner sheath, galvanised steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade and laid in trenches/pipe / ducts or on pole complete all as specified and directed Make: Havells/KEI/Finolex

Supply, lay, Joint and test 4 Core 16sqmm XLPE insulated, Extruded PVC outer sheath and inner sheath, galvanised steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade and laid in trenches/pipe / ducts or on pole complete all as specified and directed Make: Havells/KEI/Finolex

Supply and lay 63 mm OD, Double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS 16205 & IS14930 ( Part I and II) for protection of underground cables with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) Make: Rex/Poly/Gemini

M&L Ceiling rose, 3-Ph/ PVC /polycarbonate, isolated body complete all as specified and directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

Supply, install , test and commission of 2X150W LED high intensity, long range, weather & dust proof motor operated security search light with highly polished stainless steel reflector cum body, suitable sinks, toughten front glass, retaining ring, MS cradle and passivated bolts, swiveling type & have both vertical and horizontal operational control with help of remote control unit with suitable control cable, suitable for installing on the roof of the watch tower cabin complete all as specified. Make: Sigma cat No.24441-MSL2/Kalin

M/s SK Traders

SHREE CHAMUNDA ENTERPRISE

Nitesh Enterprise

AARTI ENTERPRISE