Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.7 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | Rejected-Technical | - | Rejected-Technical L7 | |
| 3 | Rejected-Technical | - | Rejected-Technical L6 | |
| 4 | Rejected-Technical | - | Rejected-Technical L2 | |
| 5 | Rejected-Technical | - | Rejected-Technical L8 |
| Sl No | Description | Qty | Unit | MANOHARAN.K L5 | Shafi A L3 | G.GANGADHARAN L6 | GOODWIN R S L2 | JINEESH S H L8 | JINO D U L1 | Vijayan L4 | ARUN REEJIN K L7 | SINDHU BALAN L9 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00Maintenance CHC Poovar | ||||||||||||
| 1.00 | 2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | 109.05 | cum | 280 ₹30,534 | 255.72 ₹27,886.27 | 260.41 ₹28,397.71 | 251 ₹27,371.55 | 277 ₹30,206.85 | 250.35 ₹27,300.67 Lowest | 257 ₹28,025.85 | 274.11 ₹29,891.7 | 287.95 ₹31,400.95 |
| 1.00 | OD109275/2026-2027:Providing and laying 80mm thick factory made cement concrete interlocking paver block of M-30grade made by block making machine with strong vibratory compaction, of approved size design and shape laid in required colour and pattern over and including 50mm thick compacted bed of 6mm course aggregate etc. all complete as per the direction of Engineer -in-charge | 105 | sqm | 900 ₹94,500 Lowest | 924.8 ₹97,104 | 941.75 ₹98,883.75 | 907.73 ₹95,311.65 | 1,010 ₹1,06,050 | 905.37 ₹95,063.85 | 926 ₹97,230 | 991.32 ₹1,04,088.6 | 1,041.36 ₹1,09,342.8 |
| 1.00 | 22.23.2:Providing and applying integral crystalline slurry of hydrophilic in nature for
waterproofing treatment to the RCC structures like retaining walls of the basement,
water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels
/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts
integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts
integral crystalline slurry : 1 part water) for horizontal surfaces and applying the
same from negative (internal) side with the help of synthetic fiber brush. The material
shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing
permeability of concrete by more than 90% compared with control concrete as per
DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline
slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work
shall be carried out all complete as per specification and the direction of the engineerin-
charge. The product performance shall carry guarantee for 10 years against any
leakage.For horizontal surface one coat @1.10 kg per sqm. | 59.15 | sqm | 280 ₹16,562 Lowest | 313.69 ₹18,554.76 | 319.44 ₹18,894.88 | 307.9 ₹18,212.29 | 340 ₹20,111 | 307.1 ₹18,164.97 | 314 ₹18,573.1 | 336.25 ₹19,889.19 | 353.23 ₹20,893.55 |
| 1.00 | 15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below | 16 | each | 310 ₹4,960 | 304.77 ₹4,876.32 | 310.35 ₹4,965.6 | 299.14 ₹4,786.24 | 330 ₹5,280 | 298.36 ₹4,773.76 Lowest | 305 ₹4,880 | 326.69 ₹5,227.04 | 343.18 ₹5,490.88 |
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 131.09 | kg | 490 ₹64,233.12 | 469.5 ₹61,545.82 | 478.11 ₹62,674.48 | 460.83 ₹60,409.28 | 510 ₹66,854.88 | 459.64 ₹60,253.29 Lowest | 471 ₹61,742.45 | 503.27 ₹65,972.66 | 528.67 ₹69,302.29 |
| 1.01 | 15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | 2.5 | cum | 1,500 ₹3,747 Lowest | 1,710.17 ₹4,272 | 1,741.52 ₹4,350.32 | 1,678.6 ₹4,193.14 | 1,851 ₹4,623.8 | 1,674.24 ₹4,182.25 | 1,713 ₹4,279.07 | 1,833.18 ₹4,579.28 | 1,925.71 ₹4,810.42 |
| 1.01 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 48.04 | sqm | 1,150 ₹55,249.45 | 1,026.83 ₹49,331.99 | 1,045.65 ₹50,236.16 | 1,007.87 ₹48,421.1 | 1,111 ₹53,375.77 | 1,005.26 ₹48,295.71 Lowest | 1,029 ₹49,436.25 | 1,100.69 ₹52,880.45 | 1,156.24 ₹55,549.24 |
| 1.01 | 14.5.1:Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Float glass panes of thickness 4 mm (weight not less than 10kg/sqm) | 10.2 | sqm | 1,050 ₹10,710 | 948.46 ₹9,674.29 | 965.85 ₹9,851.67 | 930.95 ₹9,495.69 | 1,026 ₹10,465.2 | 928.54 ₹9,471.11 Lowest | 950 ₹9,690 | 1,016.68 ₹10,370.14 | 1,068 ₹10,893.6 |
| 1.01 | OD108929/2026-2027:Providing and fixing factory made panel PVC door shutter | 5 | each | 2,800 ₹14,000 | 2,637.83 ₹13,189.15 | 2,686.19 ₹13,430.95 | 2,589.14 ₹12,945.7 | 2,855 ₹14,275 | 2,582.43 ₹12,912.15 Lowest | 2,643 ₹13,215 | 2,827.57 ₹14,137.85 | 2,970.29 ₹14,851.45 |
Tender Value
₹15.3 L
EMD Value
₹38,127
Closing Date
5 Aug 2026, 4:00 pmClosed
AE
Office of AEE Parassala B P
Pro.no.47/2026-27-Basic infrastructure and facilities improvement for CHC poovar gp- Third stage
2026_LSGD_861447_1
1/AE/LIDEW/PSLA
Open Tender
Civil Works - Buildings
Item Rate
Parassala B P
Please refer Tender documents.
10 documents required · 10 mandatory
₹2,760
Yes
₹38,127
Yes
7 Oct 2026
21 Jul 2026
7 Aug 2026
21 Jul 2026
5 Aug 2026
21 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Maintenance CHC Poovar | |||||
| 1.001 | 2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | 1 | cum | - | - |
| 1.002 | OD109275/2026-2027:Providing and laying 80mm thick factory made cement concrete interlocking paver block of M-30grade made by block making machine with strong vibratory compaction, of approved size design and shape laid in required colour and pattern over and including 50mm thick compacted bed of 6mm course aggregate etc. all complete as per the direction of Engineer -in-charge | - | sqm | - | - |
| 1.003 | 22.23.2:Providing and applying integral crystalline slurry of hydrophilic in nature for
waterproofing treatment to the RCC structures like retaining walls of the basement,
water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels
/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts
integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts
integral crystalline slurry : 1 part water) for horizontal surfaces and applying the
same from negative (internal) side with the help of synthetic fiber brush. The material
shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing
permeability of concrete by more than 90% compared with control concrete as per
DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline
slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work
shall be carried out all complete as per specification and the direction of the engineerin-
charge. The product performance shall carry guarantee for 10 years against any
leakage.For horizontal surface one coat @1.10 kg per sqm. | 1 | sqm | - | - |
| 1.004 | 15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below | - | each | - | - |
| 1.005 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 0.2 | kg | - | - |
| 1.006 | 15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | - | cum | - | - |
| 1.007 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 1 | sqm | - | - |
| 1.008 | 14.5.1:Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Float glass panes of thickness 4 mm (weight not less than 10kg/sqm) | 1 | sqm | - | - |
| 1.009 | OD108929/2026-2027:Providing and fixing factory made panel PVC door shutter | - | each | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
finance_1456919.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.09 MB
BOQ_1456919.xls
BOQ • 0.32 MB
3rdstagechcsbd.pdf
Tender Documents • 1.79 MB
chcpoovar3rdstagenit.pdf
Tender Documents • 0.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .