GE/KHU-44/2020-21 SPECIAL REPAIR TO BUILDING NOS T-19 OF 608 EME BN AND T-37 OF HQ 8 MTN DIV AND PROVN OF TOILET BLOCK AT COMP PL ASC AT KHUMBATHANG IN THE AOR OF AGE BR-I KHUMBATHANG UNDER GE KHUMBATHANG

Amount

M & L for excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundations etc or for shafts, wells cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.

M & L for Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.

M & L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frame) n exc 1.50 Sqm each and removed to store complete all as specified and directed

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description n-exc 2 Sqm each complete all as specified and directed.

Dismantling, wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling timber in fillets, rails, posts, rafters, purlins etc under 40 Sq cm in section in any position unframed work complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any guage, thickness including nainital or similar pattern roof covering and wall cladding complete all as specified and directed.

S&F 0.63 mm thick galvanised corrugated steel sheeting with two corrugations side lap, fixed with L type or J type or cranked hook bolts and washers in roofs, walls etc with grade of zinc coating complete all as specified and directed.

All as per item No 10 here in before but 0.63 mm plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

S & F pre-painting galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 thick of any colour having tensile strength 550 MPa as in roof covering/cladding to wall fixed with self tapping screws as specified complete all as specified and directed.

S&F 2 mm fiber glass reinforced translucent corrougated sheeting with two corrugations side lap fixed with 'L' or 'J' hooks in roof/ wall complete all as specified and directed.

Demolition of brick or stone boulder masonry built in cement mortar incl all quoins, arches, pillars etc, but exc ashlar facings dressed stone works and precast cement articles including rubbish off the premises, complete all as specified and directed.

Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for, including rubbish off the premises complete, all as specified and directed.

M&L Roughening surfaces of old concrete surfaces by picking sweeping, cleaning and washing down with water to remove dust etc complete all as specified and directed.

M&L Precast PCC (1:3:6) type C1 (using 20mm graded agg) solid block masonry exc 10cm in width or girth and setting CM (1:4) complete all as specified and directed.

M&L Precast PCC (1:3:6) type C1 (using 20mm graded agg) solid block masonry exc 10cm in width or girth and setting CM (1:6) complete all as specified and directed.

M&L 25 mm thick cement concrete Type B-0, 1:2:4 (12.50mm graded crushed stone aggregate) as in sub base to floor complete complete all as specified and directed. .

M&L 75 mm thick cement concrete Type B-1, 1:2:4 (20mm graded aggregate) as in sub base complete all as specified and directed.

M&L for plain Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including complete all as specified & directed.

M & L for form work to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams: and similar works; vertical or to batter for flat rough finished surfaces complete all as specified and directed by Engr-in-Charge.

M&L providing, cement concrete 1:1.5:3 type A-2 (40mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets andrailings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in strirrups, spaces and binder and including mild steel wire (annealed) not less than 0.9mm dia etc complete all as specified and directed by Engr-in-Charge.

M&L for 20-25 mm thick machine cut kota stone slab flooring jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab laid over 15 mm thick screed bed of CM 1:6 over neat cement slurry @ 3 Kg/Sqm over sub base including rubbing and polishing complete all as specified and directed by Engr -in Charge.

M & L for Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over 15 mm thick screed bed in CM 1:6 complete all as specified and directed by Engr -in Charge.

M & L Glazed ceramic tiles coloured (350x250x7mm/ 450x350x7mm) for works on vertical surfaces such as skirting/dados of economy class B-III conforming to IS-13712 etc set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10 mm thick in cement mortar 1:3, as in backing layer without using extra cement complete all as specified.

M&L Aluminium anodised coloured powdered coated frame work as in partition wall/door /chawkhats/ window / deco grills using any suitable section conforming to IS-733 and IS-1285 amd coating grade A-153 confirming to IS-1868 fixed with rawl plug and screw or with fixing clips with expansion hold fasteners including necessary jointing cleats, glazing clips, rubber packing anodised aluminium map beading packing anodised aluminium map beading screws, anodised aluminium fittings etc gap of junction at top, bottom & slides filled with PVC/Neoprene felt, handles etc complete all as specified and directed by Engr -in Charge.

S&F Aluminium anodised window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 kg/M icluding necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading , screws etc, complete all as specified and directed by Engr -in Charge.

S&F 2nd class soft wood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 2nd class class HW plain solid straight chowkhat and framed wrought framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints

M/L for glazed and skelton shutters 35 mm thick 2nd class hard wood, open rebated and prepared to receive glass, gauge, etc, divided into square with plain, chamfered or rounded mitred and rebated sash bars, any numbers, complete all as specified and directed .

S&F 35mm thick 2nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified as per IS fitted to chowkats complete all as specified and directed .

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

M&L second class soft wood, plain fillets, square or rectangular in section of area exc 13 and not exc. 25 Sqcm, clean sawn, secured with nails or brads complete all as specified and directed .

M&L second class soft wood, plain fillets, square or rectangular in section of area exc 6 and not exc 13 Sqcm, clean sawn, secured with nails or brads complete all as specified and directed .

M&L for second class class hard wood timber scantling plain fillets square, rectangular in section area exc 3 Sqcm and not exc 6 sqcm secured with nails complete all as specified and directed .

M&L for second class hard wood timber scantling plain fillets square, rectangular in section area not exc 3 Sqcm secured with nails complete all as specified and directed .

M&L second class soft wood, bull nosed, splayed, chamfered or rounded on one edge or face not exc 3 and Sqcm sectional area complete all as specified and directed .

M&L 9mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work as in ceiling complete all as specified and directed .

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube all as specified and directed by Engr-in-Charge

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed ..

S&F MS Hand rails, half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed .

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintel hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps,plate washers and similar small articles conforming to Fe 290 Gde E -165 complete all as specified and directed.

M&L for plain cement concrete Type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in cills, steps,plinth courses apex stones,bed plates copping and like incl eathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L 12mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F 100 mm aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 125 mm long aluminium anodised, cast type handles and fixed complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed.

S&F 125 mm size MS pressed handle oval type stove enameled block complete all as specified and directed.

S&F 125 mm size MS barrel tower bolt stove enamelled black with bright bolt complete all as specified and directed.

S&F 250 mm long MS sliding bolt plate type, stove enameled black with bright bolt not less than 12mm dia with and including a min of size bolt & nuts four on bolt & two on staple complete all as specified and directed.

S&F Aluminium anodised sliding door bolt 250 mm long plate type stove enamelled black with bright bolt not less than 12 mm dia with and incl a minimum of 6 bolt and nut four on bolt plate and two on staple plate and fixed complete all as specified and directed.

Hacking out old broken glass (any thickness, size,quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and directed..

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed.

M&L Cement concrete type C-2 1:3:6 ( 20 mm graded stone agg ) 75 mm thick as in plinth protection finish even and smooth complete all as specified and directed.

M&L for 50mm thick, cement concrete, type C-1, 1:3:6 (20 mm graded stone aggregate) as in floors & pavings, plinth protection, path, etc. finishing top surfac even and smooth all as specified.

Taking down cement plaster on brick or stone walls including raking out joints, haking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finishing surfaces even & rough to receive toping layer etc. all as specified

M&L rendering 10 mm thick in CM 1:6 on fair faces of brick or concrete,internal surfaces of walls finished the surface fair and even complete all as specified.

M&L 15mm thick rendering on walls brick or concrete surfaces in cement mortar 1:4 with water proofing compound, incl fair even and smooth w/o using extra cement complete all as specified and directed. Note: Item includes rate of water proofing compound.

M&L for preparation of old plastered surfaces of walls or concrete surface and applying two coats of white wash, complete all as specified and directed.

M&L for three coats of white wash on new/undecorated wall surfaces, including preparation of surfaces of new plastered or unplastered surface, complete all as specified

M&L Preparation of new plastered surfaces of any description ,not other wise described over 10cm width or girth and applying, two coat of acrylic distemper/distemper oil emulsion (OBD),complete all as specified.

M&L Preparation of old plastered surfaces washing ,rubbing down and stopping of distempered and painted surfaces of walls//ceiling and applying one coat of acrylic distemper/ distemper oil emulsion (OBD),complete all as specified.

M&L Preparation of new plastered surfaces of walls and applying two coats of cement base paint , complete all as specified and directed.

M&L two coats of cement base paint over one coat of cement primer on new plastered wall surfaces of any description including preparation of surfaces, complete all as specified

M&L Preparation of old plastered surfaces washing ,rubbing down and stopping of distempered and painted surfaces of walls/ceiling and applying one coats of cement base paint, complete all as specified and directed.

M&L preparation of new steel surfaces of any description over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L preparation of old steel surfaces of any description over 10cm in width or girth,not otherwise describedand applying one coat of synthetic enamel paint , complete all as specified and directed.

M&L for returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each,of any type soil, complete all as specified and directed.

M& L for removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

S&F rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates etc.FE -410 Gde E-250 complete all as specified and directed.

S&F 19 mm dia teak wood finish curtain rod of good quality etc complete all as specified and directed by Engr-in-Charge

S&F wooden brackets for wooden curtain rod of matching colour etc complete all as specified and directed by Engr-in-Charge

M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified.

S&F PVC valveless,syphonic action type low level flushing cistern 10 ltrs capacity with float ball valve,with inlet,ball valve and handle including bracket including fixing of flush pipe complete all as specified and directed

S&F vitreous china squatting pan "ORISSA" pattern of size 580 x 440 mm white with integral foot rests complete including provn of lime concret beding and making good for floor complete all as specified and directed.

S&F Salt-glazed stoneware gully traps of size 100x100mm square or round mouthed, type 'P' complete all as specified and directed.

S&F 100mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laidin trenches or icomplete all as specified and directed.

S&F 100mm PVC (SWR) pipes double socketed, in any length with rubber ring joints,fixed to wall or in floors complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes double socketed, in any length with rubber ring joints,fixed to wall or in floors complete all as specified and directed.

S&F 75mm PVC (SWR) junction double (doubleT),equal or unequal complete all as specified.

S&F 75mm PVC (SWR) reducer complete all as specified.

S&F 75mm PVC (SWR) vent cowl complete all as specified.

S&F stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified.

M&L 75mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified.

S & F Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper including brackets and cutting for and pinning in ends of brackets or erecting stand complete all as specified

S&F40 mm Waste coupling of PTMT (half or full threaded).(Minimum weight 60 gms ) complet all as specified.

S&F 40 mm thick Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm complete all as specified

S&F brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified

S&F steel water tubing galvanised 15mm bore medium grade fixed to walls, under floors and on ceiling surfaces or in chases including all fittings complete all as specified and directed.

S&F steel water tubing galvanised 20 mm bore medium grade fixed to walls, under floors and on ceiling surfaces or in chases including all fittings complete all as specified and directed.

M&L 63 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified.

S&F 15 mm bore fancy type repair pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed..

S&F 15 mm bore fancy type Bib taps, chromium plated,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S&F PVC connection pipe 15 mm with PTMT nuts of length 450 mm complete all as specified..

S&F Stop valves, Chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass union complete for dia of bore of pipe 15 mm. complete all as specified.

Taking down carefully copper/aluminium point wiring (light, fan socket or power) complete including fittings such as switches, ceiling rose, pendents, regulator sockets etc, removing material from site and making good the disturbed surfaces of wall/floor/roof all as specified & directed by Engr-in-charge.

Material & Labour for point wiring with 1.5 sq mm (Nominal area) FRLS, PVC insulated, 1100 volt grade, multistranded copper conductor cable un-sheathed in & including PVC casing caping with fittings/accessories and PVC insulated, FRLS, 1100 volt grade unsheathed copper conductor of 1.5 sqmm size cable earth wire connected to common earth including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting of switches, sockets, fan regulators etc with 3mm thick plastic laminated sheet of Hylam/Mica make as top cover complete all as specified for the following:-

(a) One light point/fan point/buzzer point Exhaust fan point controlled by one switch.

(b) One socket out let 5 Amp on independent board complete

Material & Labour for point wiring with 2.5 sq mm (Nominal area) FRLS, PVC insulated, 1100 volt grade, multistranded copper conductor cable un-sheathed in & including PVC casing caping with fittings/accessories and PVC insulated, FRLS, 1100 volt grade un sheathed copper conductor of 2.5 sqmm size cable earth wire connected to common earth including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting of switches, sockets, fan regulators etc with 3mm thick plastic laminated sheet of Hylam/Mica make as top cover complete all as specified and directed by Engineer-in Charge .

Supply and Fixing switch piano flush button type 5 Amp single pole one way (ISI marked) complete all as specified and directed by Engineer-in Charge .

S & F in repair switch socket combination multipurpose , 5 amp flush type complete all as specified and directed.

S & F in repair switch socket combination switch socket outlet 3 pin/5 pin multipurpose , 15 amp flush type complete all as specified and directed.

S & F in repair Ceiling rose 3 plates flush type 6 Amps,250 volts AC complete all as specified and directed.

Supply and fixing in repair wall mounted Delite LED fittings with LED tube 18 watts decorative ultra slim square profile linear with extruded polycarbonate enviromental freindly , energy efficient type 4 feet long channel type bracket including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose/PVC connector to light fittings complete all as specified and directed.

Supply and fixing in repair for Distribution board double door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 250 volts, flush to wall / fixed on surface complete all as specified and directed .

Supply and fixing in repair MCB single pole, 5 to 40 Amp 240 volt B curve 10 KA, IP 20 complete all as specified and directed .

Supply and fixing repair MCB single pole & neutral 240 volt B curve 10 KA 40 Amps capacity IP 20 complete all as specified and directed .

Material and labour earthing complete with galvanized steel earth plate 60 cm x 60cm x 6.0mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less less than 1.5 mtr filled around with 15 cm thick alternate layers of charcoal dust and salt and connected to earth lead wire 4 mm dia (8 SWG) by means of bolt, nut and check nuts and washers of galvanized iron or steel and thimble and other ends of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm bore and watering pipe 20mm dia light grade with funnel and wire mesh, pcc 1:3:6 type C-1 in chambers RCC 1:2:4 type B-1 in pit cover reinforced with 8 mm dia deformed bars 15cm center to center both ways all as directed by Engr-In-Charge, complete all as shown in electric plate No 3 of MES SSR Part I of 2010

S & F in replacement of existing UNSV LED building security light of 30 Watt new technology consist of a die cast body with heat resistant toughend glass & IP 65 protection level in existing GI bracket of 40mm dia 1.5 mtr long bent to shape and making necessary connection complete all as specified and directed by Engr- In- Charge.

Supply and fix in repair louvers plastic body suitable for Exhaust fan, Ventil Air - DX White for 250 mm dia sweep complete with fixing accessories complete all as specified and directed by Engineer-in Charge .

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed.

Deduct Credit for Demolished/Dismantled material Rs (-) 17,367.00 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

M/S ALI MOHD AND SONS

CHAMRAN TRADING NAD CONSTRUCTION KARGIL

M/S HIGHLAND ENGINEERING