Construction Of Cultural Cum Community Hall At Bamti Tal-Dharampur, Dist-Valsad.

No figures

1 Excavation for foundation for depth from 3.0 m to 5.0 4.05 CMT. 179.78

m including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead..(D) Soft rock not requiring blasting ( II )

1.5 To 3.0 MT Depth

2 Providing and laying controlled cement concrete M.250 22.75 CMT. 3581.46

and curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in foundation, footings base of column

and mass concrete. (A) Footing/ Raft

3 Providing and laying controlled cement concrete M.250 8.16 CMT. 5724.68

and curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in All Types of Column D) Column, Pillers,

posts and struts , upto Plinth

4 Providing and laying controlled cement concrete M.250 7.52 CMT. 5724.68

and curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in All Types of Column D) Column, Pillers,

posts and struts, upto Ground Floor

5 Providing and laying controlled cement concrete M.250 19.64 CMT. 5758.92

and curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in All Types of Column D) Column, Pillers,

posts and struts, upto First Floor

6 Providing and laying controlled cement concrete M.250 6.41 CMT. 5793.16

and curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in All Types of Column D) Column, Pillers,

posts and struts, upto Terrace Floor

7 Providing and laying controlled cement concrete M.300 1.03 CMT. 5869.11

and curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in All Types of Column D) Column,

Pillers, posts and struts , upto Plinth

Item Rate In

Description of Item Quantity Unit Amount

No figures

8 Providing and laying controlled cement concrete M.300 7.88 CMT. 5869.11

and curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in All Types of Column D) Column,

Pillers, posts and struts, upto Ground Floor

9 Providing and laying controlled cement concrete M.300 20.79 CMT. 5903.35

and curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in All Types of Column D) Column,

Pillers, posts and struts, upto First Floor

10 Providing and laying controlled cement concrete M.300 4.62 CMT. 5937.59

and curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in All Types of Column D) Column,

Pillers, posts and struts, upto Terrace Floor

11 Providing and laying controlled cement concrete work 79.79 CMT. 4671.25

M250 and curing complete including the cost of form

work but excluding the cost of reinforcement of

reinforced concrete work in Beams Ground Floor

12 Providing and laying controlled cement concrete work 65.13 CMT. 4705.49

M250 and curing complete including the cost of form

work but excluding the cost of reinforcement of

reinforced concrete work in Beams First Floor

13 Providing and laying controlled cement concrete work 10.87 CMT. 4739.73

M250 and curing complete including the cost of form

work but excluding the cost of reinforcement of

reinforced concrete work in Beams Terrace Floor

14 Providing and laying controlled cement concrete M.300 45.36 CMT. 4814.67

and curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in All Types of Beams,(E) Beam, Ground

15 Providing and laying controlled cement concrete M.300 45.36 CMT. 4848.91

and curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in All Types of Beams,(E) Beam, First

16 Providing and laying controlled cement concrete work 190.49 CMT. 4631.86

M250 and curing complete including the cost of form

work but excluding the cost of reinforcement of

reinforced concrete work in All Types of Slab,All

Thickness (C) Slab upto Plinth and Ground Floor

Item Rate In

Description of Item Quantity Unit Amount

No figures

17 Providing and laying controlled cement concrete work 140.62 CMT. 4666.10

M250 and curing complete including the cost of form

work but excluding the cost of reinforcement of

reinforced concrete work in All Types of Slab,All

Thickness (C) Slab upto First Floor

18 Providing and laying controlled cement concrete work 7.62 CMT. 4700.34

M250 and curing complete including the cost of form

work but excluding the cost of reinforcement of

reinforced concrete work in All Types of Slab,All

Thickness (C) Slab upto Terrace Floor

19 Providing and laying controlled cement concrete work 5.28 CMT. 4083.43

M250 and curing complete including the cost of form

work but excluding the cost of reinforcement of

reinforced concrete work in All Types of Stair Case,All

Thickness (C) Staircase Ground Floor

20 Providing and laying controlled cement concrete work 8.46 CMT. 4117.67

M250 and curing complete including the cost of form

work but excluding the cost of reinforcement of

reinforced concrete work in All Types of Stair Case,All

Thickness (C) Staircase First Floor

21 Providing and laying controlled cement concrete work 0.08 CMT. 4151.88

M250 and curing complete including the cost of form

work but excluding the cost of reinforcement of

reinforced concrete work in All Types of Stair Case,All

Thickness (C) Staircase Terrace Floor

22 Providing and laying controlled cement concrete work 4.75 CMT. 4875.27

M250 and curing complete including the cost of form

work but excluding the cost of reinforcement of

reinforced concrete work in All Types of Wall,All

Thickness in Walls PARDI upto Plinth

23 Providing and laying controlled cement concrete work 5.27 CMT. 4909.51

M250 and curing complete including the cost of form

work but excluding the cost of reinforcement of

reinforced concrete work in All Types of Wall,All

Thickness in Walls PARDI First Floor

24 Providing and laying controlled cement concrete work 0.92 CMT. 4943.75

M250 and curing complete including the cost of form

work but excluding the cost of reinforcement of

reinforced concrete work in All Types of Wall,All

Thickness in Walls PARDI upto Terrace Floor

Item Rate In

Description of Item Quantity Unit Amount

No figures

25 Providing and laying controlled cement concrete work 10.01 CMT. 4395.52

M250 and curing complete including the cost of form

work but excluding the cost of reinforcement of

reinforced concrete work in Lintel. upto Ground Floor

26 Providing and laying controlled cement concrete work 10.01 CMT. 4429.76

M250 and curing complete including the cost of form

work but excluding the cost of reinforcement of

reinforced concrete work inLintel. upto First Floor

27 Providing and laying controlled cement concrete work 1.38 CMT. 4464.00

M250 and curing complete including the cost of form

work but excluding the cost of reinforcement of

reinforced concrete work inLintel. upto Terrace Floor

28 Providing and laying controlled cement concrete work 8.10 CMT. 5003.54

M250 and curing complete including the cost of form

work but excluding the cost of reinforcement of

reinforced concrete work in Chajja. Upto Ground Floor

29 Providing and laying controlled cement concrete work 8.10 CMT. 5037.78

M250 and curing complete including the cost of form

work but excluding the cost of reinforcement of

reinforced concrete work in Chajja. First Floor

30 Providing and laying controlled cement concrete work 8.10 CMT. 5072.02

M250 and curing complete including the cost of form

work but excluding the cost of reinforcement of

reinforced concrete work in Chajja. Terrace Floor

31 Providing and fixing TMT bars Fe-500D steel 53700.50 Kg . 45.95

reinforcement for R.C.C. work including binding, bending

and placing in position complete upto floor two level

,Ground Floor , First floor , Terrace Floor All Floor Level.

32 Brick work using common brunt clay building bricks 174.98 CMT. 2848.20

having crushing strength not less than 35 kg/sqcm. in

superstructure above plinth level upto floor two level in

cement mortar 1:6 (1 cement :6 fine sand) etc.comp. (B)

Conventional Ground Floor

33 Brick work using common brunt clay building bricks 146.32 CMT. 3014.85

having crushing strength not less than 35 kg/sqcm. in

superstructure above plinth level upto floor two level in

cement mortar 1:6 (1 cement :6 fine sand) etc.comp. (B)

Conventional First Floor

Item Rate In

Description of Item Quantity Unit Amount

No figures

34 Brick work using common brunt clay building bricks 60.31 CMT. 3181.50

having crushing strength not less than 35 kg/sqcm. in

superstructure above plinth level upto floor two level in

cement mortar 1:6 (1 cement :6 fine sand) etc.comp. (B)

Conventional Terrace Floor

35 Providing 15mm thick cement plaster in single coat on 1457.90 SMT. 97.26

Rough (Similar)side of single or Full/half brick walls for

interior plastering upto floor two level and finished even

and smooth in (ii) Cement mortar 1:4 (1-cement :4-

sand) Ground Floor

36 Providing 15mm thick cement plaster in single coat on 1243.00 SMT. 112.11

Rough (Similar)side of single or Full/half brick walls for

interior plastering upto floor two level and finished even

and smooth in (ii) Cement mortar 1:4 (1-cement :4-

sand) First Floor

37 Providing 15mm thick cement plaster in single coat on 249.04 SMT. 126.96

Rough (Similar)side of single or Full/half brick walls for

interior plastering upto floor two level and finished even

and smooth in (ii) Cement mortar 1:4 (1-cement :4-

sand) Terrace Floor

38 Providing & laying10 mm. thick cement plaster in single 1277.74 SMT. 89.49

coat on fair side of ceilings for interior plastering upto

floor two level and finishing with smooth mala plaster.(i)

Cement mortar 1:4 (1 cement : 4 sand) Ground Floor

39 Providing & laying10 mm. thick cement plaster in single 993.31 SMT. 103.02

coat on fair side of ceilings for interior plastering upto

floor two level and finishing with smooth mala plaster.(i)

Cement mortar 1:4 (1 cement : 4 sand) First Floor

40 Providing & laying10 mm. thick cement plaster in single 50.78 SMT. 116.55

coat on fair side of ceilings for interior plastering upto

floor two level and finishing with smooth mala plaster.(i)

Cement mortar 1:4 (1 cement : 4 sand) Terrace Floor

41 20mm thick sand faced cement plaster on walls upto 1699.09 SMT. 190.89

height 10 metres above ground level consisting of 12mm

thick backing coat of C.M. 1:3 (1-cement : 3-sand) and

8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand)

etc. complete. Upto Ground Floor to First Floor

42 20mm thick sand faced cement plaster on walls upto 285.64 SMT. 207.86

height 10 metres above ground level consisting of 12mm

thick backing coat of C.M. 1:3 (1-cement : 3-sand) and

8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand)

etc. complete. Upto Terrace Floor

Item Rate In

Description of Item Quantity Unit Amount

No figures

43 Providing and laying polished Granite Slab 18mm thick 160.80 SMT. 2466.42

in Flooring laid 20mm thick Cement Mortar 1:4 (1-

Cement : 4-Coarse Sand) and jointed with Grey Cement

Slurry including full molded round front edges , rubbing

and polishing etc. complete.

44 Providing and laying polished Granite Slab 18mm thick 517.88 SMT. 2438.14

in Risers of steps Dedo, window sill, jembs and pillars

laid 10 mm thick Cement Mortar 1:4 (1-Cement : 4-

Coarse Sand) and jointed with Grey Cement Slurry

including full molded round edges , rubbing and

polishing etc. complete.

45 Providing and laying polished Kota stone slab flooring 823.95 SMT. 653.47

over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1.1.5 laid over and

jointed with grey cement slurry including rubbing and

polishing etc. complete. (B) 30 mm thick

46 Providing and laying polished kota stone slab 25mm 25.32 SMT. 691.85

thick in risers of steps,skirting Dedo and pillars laid on

10mm thick cement mortar 1:3 (1-Cement : 3 coarse

sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing and

polishing etc. complete.

47 Providing and laying Vitrified tiles 8 to 10 mm thick , 1210.50 SMT. 767.60

24'' x 24'' in flooring treads of steps and landing laid on

a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) With filling in Joint Epoxy grout 4mm to

6mm thick tiles joint including spacer with cleaning of

joint by vacuum or blower etc. finishing with flush

pointing in white cement.

48 Providing and laying Vitrified tiles 8 to 10 mm thick , 702.63 SMT. 786.79

24'' x 24'' in skrting risers of steps and dedo on 10mm

thick cement plaster 1:3 (1-cement : 3-coarse sand) With

filling in Joint Epoxy grout 4mm to 6mm thick tiles joint

including spacer with cleaning of joint by vacuum or

blower etc. and jointed with white cement slurry

49 Providing and fixing flush door both sides laminated 148.87 SMT. 3507.73

andshutter fabricated from 35 mm thick solid core

malemine faced three layered pre laminated flat pressed

wood based exterior grade bonded BWP/BWR synthetic

resin having stamped IS 12823 grade I type II including

three coats of lacquer polishing to exposed wooden

surfaces and Stainless steel decorative type designs

fixtures / fastening 2Nos. Handles, 2Nos. Aldropes,

towerbolt etc. as per architectural detailed drawing and

as directed by engineer in charge..

Item Rate In

Description of Item Quantity Unit Amount

No figures

50 Providing and fixing flush door both sides laminated and 36.60 SMT. 7072.02

I.T.W. beading all around by using I.T.W.(100% Valsadi

Saag Wood) frame 230 m.m. x 100 m.m.. shutter

fabricated from 35 mm thick solid core malemine faced

three layered pre laminated flat pressed wood based

exterior grade bonded BWP/BWR synthetic resin having

stamped IS 12823 grade I type II including three coats of

lacquer polishing to exposed wooden surfaces including

8 mm ISI plywood both side fixing on flush door and

Stainless steel decorative type designs fixtures /

fastening 4Nos. Handles, 2Nos., towerbolt, 6nos. 9 inch

Heavy S.S. Hinges, Aldrop Drop. 20 Cm.,2nos. Floor Door

stopper 10 cm. etc.including I.T.W.(100% Valsadi Saag

Wood) batten patta of size 75m.m.x25m.m.etc. as per

architectural detailed drawing and as directed by

engineer in charge.

51 Providing and fixing window having extruded aluminum 145.08 SMT. 1889.71

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm (of Section no:2459 @ wt.of

Kg/mt), horizontal Three track member size 92mm x

31.75mm x 1.30mm (of Section no:8688,@ Wt.1.07

Kg/mt), vertical member of size 92mm x 31.75mm x

1.50mm (of Section no:8933,@ Wt. 1.06 Kg/mt) with

sliding shutters of horizontal member size 40 mmx18mm

x1.29mm (of Section no:8947@ wt.of 0.456 Kg/mt),

vertical member of size 40mm x 18mm x 1.29 mm (of

Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm th

transparent bronze colour tinted float glass with Colour

anodized aluminum fittings & fixtures and transparent

silicon sealant glass fixing to frame as per details etc

Item Rate In

Description of Item Quantity Unit Amount

No figures

52 Providing and fixing window having extruded aluminum 18.60 SMT. 2042.22

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm(of Jindal Section no:4605,@ Wt

Kg / Rmt), horizontal two track member size 61.85 mm x

31.75 mm x 1.20mm (of Section no: 8687 @ wt.of

Kg/mt), vertical member of size 61.85 mm x 31.75mm x

1.30 mm (of Section no:8758 @ wt.of 0.0.659 Kg/mt)

with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm (of Section no:8949 @ wt.of

0.456Kg/mt), vertical member of size 40mm x 18mm x

1.29mm (of Section no:8947 @ wt.of 0.456Kg/mt/

Section 8948, @ Wt. 0.457 Kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with Colour

anodized aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

complete for window.

53 Providing and fixing standared extruded of alluminium 63.36 SMT. 1820.02

section of size 63.50 x 38.10 x 1.95 mm(of Jindal Section

no:4605,@ Wt 1.094Kg / Rmt with colour anodized

alluminium frame with 5 mm thick transparent bronze

colour tinted float glass as details etc complete for Fix

54 Providing and fixing standared extruded of alluminium 21.33 SMT. 1399.86

section of size 63mm x 38.10mm x 1.2mm (Jindal Section

:2434, @ Wt. 0.643 Kg/mt) with colour anodized

alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for Ventilation

55 Providing and fixing M.S. grill of required pattern of 4540.80 Kg. 70.70

windows etc. with M.S.. flats at required spacing and

frame alround square or round headed bolts and nuts or

by screws.including applying a priming coat of red lead

paint and two coats of oil painting etc complete (A)Plain

56 Applying two coats of Birla (white cement based) or 5271.77 SMT. 47.87

(acrylic lapy- putty) or equivalent & two coats of primer

of approved brand and manufacture on new wall

surface,Ceiling surface to give an even shade including

thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

57 Wall painting (two coats) with plastic emulsion paint of 5271.77 SMT. 102.31

approved brand and manufacture on undecorated wall

surface,Ceiling surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered

Item Rate In

Description of Item Quantity Unit Amount

No figures

58 Finishing wall with weather proof exterior emulsion 727.68 SMT. 72.72

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the surface

to remove all dirt, and remains of loose powdered

materials.etc complete

59 Applying priming coat over new steel and other metel 271.23 SMT. 77.77

surface after and including preparing the surface by

throughly cleaning, oil,grease, dirt and other foreign

matter and scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed priming paint

brushing red lead. and Painting two coats (excluding

priming coat) on new steel and other metal surface with

enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign

60 Steel work welded in built up sections, framed work 58.37 Quintal 6085.25

including cutting, hoisting, fixing in position and applying

a priming coat of red lead paint :-

(A) In beams and joints channels angles, column, tees,

flats with connecting plates or angle cleats as in main and

cross beams, hip and jack rafters, purlins connected to

common rafters and the like.

61 Providing and fixing in position callapsible steel shutters 14.64 SMT. 3673.37

with vertical channels 20 x 10 x 2 mm braced with flat

iron diagonals 20 x 5 mm size with top and bottom rails

of T_rin 40x 40 x 6 mm with 38mm dia, steel pulleys

complete with bolts, nuts, locking arrangements,

stoppers handles including applying a priming coat of

read lead paint.

62 Providing & applying single coat of textured at external 1257.05 SMT. 313.61

surface at all floor levels with three coats of weather

proof cement exterior paint of approved standard brands

make at outer side of the building on RCC or Masonary

walls. Rate to include for all labour, materials, staging,

scaffolding, cleaing, curing etc. application of texture

after throughly brushing the surface to give an even

shade free from mortar dropping/other foreign matter

etc. complete. application of textures & paints must be as

per company's standard instructions. Texture and colour

recommended to use low voc paints rated by IGBC)

Item Rate In

Description of Item Quantity Unit Amount

No figures

63 Providing and laying integral cement based water 1328.52 SMT. 658.85

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc.

consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement

using 2.75 kg/sqm of cement admixed with proprietary

water proofing compound comforming to IS:2645 over

the R.C.C. slab including cleaning the surface before

(b) Laying cement concrete using broken bricks/brick

bats 25 mm to 100 mm size with 50% of cement mortar

1:5 (1 Cement : 5 Coarse sand) admixed with proprietary

water proofing compound conforming to IS:2645

,brick bats is finally covered by jointless cement plaster

20mm th. in C.M. 1:4 added with special water proofing

compound confirming to IS:2645 & top smooth finished

with trowel with false chequered marking of

mm.size.The treatment is carried along the vertical

surface of the parapet & other adjoining wall up to

height of about 300 mm in a shape of quarter round vata

Incl. curing etc. Comp. With average thickness of

mm and minimum thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with

water for a minimum period of two weeks for curing and

for final test. All above operations to be down in order

and as directed and specified by the engineer-in-charge.

With average thickness of 120 mm and minimum

thickness at khurra as 65 mm. (Cement consumption

0.511 Bags / S.M.) NOTE :- (1) The whole work is to be

64 Providing and laying broken chine mosaic flooring 50.78 SMT. 483.79

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out

upto surface using white cement including rounding off

junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed.

65 Providing and fixing Stainless Steel railing having 50 mm 40.80 RMT. 3480.46

dia hollow stainless steel pipe as hand rail and 32 mm

dia hollow stainless steel pipe with combination of 10 cm

long 16mm dia pipe as per virtical supports 20 mm dia

hollow stainless steel pipes Height As Per Drawing As per

Consultant Drawing , Suggesion & Instruction & EIC.

66 Extra for additional height of propping and centering 2038.26 SMT. 261.59

where the height of propping and centering exceeds 4 .0

M between supporting floor to ceiling including

temporary brick or stone pillars for supporting as

required. (i)Height more than 4.0 M.and upto 5.0 M.

Item Rate In

Description of Item Quantity Unit Amount

No figures

67 Extra for additional height of propping and centering 12.00 SMT. 509.04

where the height of propping and centering exceeds 4 .0

M between supporting floor to ceiling including

temporary brick or stone pillars for supporting as

required. (ii) Height more than 5.0 M.and upto 6.0 M.

68 Extra for additional height of propping and centering 12.00 SMT. 367.64

where the height of propping and centering exceeds 4 .0

M between supporting floor to ceiling including

temporary brick or stone pillars for supporting as

required. (iii) Height more than 6.0 M. and upto 7.0 M

69 Providing and fixing wash down water closet (European 20.00 No 889.81

type, W.C. Pan) with integral P or S trap including

jointing the trap with soil pipe in Cement Mortar 1:1 (1-

Cement : 1-fine sand) (Seal and cover to be measured

and paid for separately)(A) vitreous China Pattern :(i) in

white colour

70 Providing and fixing plastic seat and cover for wash 20.00 No 339.36

down water closer with C.P. brass hinges and rubber

buffers. (B) Black plastic seal and cover.

71 Providing and fixing washbasin with single hole for pillar 16.00 No 1634.69

tap with C.I. or M.S. brackets painted white including

sutting holes and making good the Providing and fixing

C.P. brass waste for washbasin or sink. (A)

32mmdia.,Providing and fixing pillar tap, capstan head,

screw down high pressure with screws, shanks and back

nuts. (i) 15mm dia.,Providing and fixing brass screw

down stop tap.(A) 15mm dia..(A) Vitreous China:(ii) Flat

Back washbasin 550 mm x v 400mm size. (i) In white

72 Providing and fixing Urinal of approved quality including 12.00 No 1303.41

connection with trap and with integral longitudinal flush

pipe.(A) Squating plate pattern white earthenware

550mm x 300mm. , Providing and fixing C.P. brass waste

for washbasin or sink. (A) 32mmdia.,Providing and

fixing pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts. (i) 15mm ,Providing

and fixing brass screw down stop tap.(A) 15mm dia.

73 Providing and fixing PVC SWR Nahni trap IS 14735 for 30.00 No 362.59

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I scread

down or hinged grating including the cost of cutting and

making good the walls.

74 Providing and fixing screw down bib taps of following 50.00 No 218.16

size.(A) Brass screw down bib tap polished bright. (i)

Item Rate In

Description of Item Quantity Unit Amount

No figures

75 Providing and fixing Gun metal check or non-return 4.00 No 489.85

fullway wheel valve. 25mm. dia.

76 Providing and fixing Gun metal check or non-return 2.00 No 782.75

fullway wheel valve. 40mm. dia.

77 Providing and fixing chromium plated brass half trun 20.00 No 277.75

flush cock of approved quality including fixing in pipe

line etc. complete.(ii) 25mm dia.

78 Providing and fixing ball cock of approved. quality as 3.00 No 155.54

directed.(A) Copper Metal (A) 25mm. dia.

79 Providing & Fixing P.V.C. pipes (SCH-40) of 190.00 RMT. 85.75

Prince/Supreme/Astral make for water supply line at all

floor levels incl. fixtures like bends, tees, shoe etc joined

with resin of approved brand & manufacture etc. comp.

(A) 15mm. dia.

80 Providing & Fixing P.V.C. pipes (SCH-40) of 64.00 RMT. 108.07

Prince/Supreme/Astral make for water supply line at all

floor levels incl. fixtures like bends, tees, shoe etc joined

with resin of approved brand & manufacture etc.

comp.(B) 25mm. dia.

81 Providing & Fixing P.V.C. pipes (SCH-40) of 124.00 RMT. 174.73

Prince/Supreme/Astral make for water supply line at all

floor levels incl. fixtures like bends, tees, shoe etc joined

with resin of approved brand & manufacture etc.

comp.(D) 40mm. dia.

82 Providing, laying and jointing in true line and level 96.00 RMT. 531.26

110mm diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed

with rubber ring, & fittings conforming to ISI 14735-

1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC clamp

of the size 110 mm diametre x 149 mm length x 145 mm

heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Item Rate In

Description of Item Quantity Unit Amount

No figures

83 Providing, laying and jointing in true line and level 96.00 RMT. 932.23

160mm diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed

with rubber ring, & fittings conforming to ISI 14735-

1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC clamp

of the size 110 mm diametre x 149 mm length x 145 mm

heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

84 Providing and fixing S.W. gully trap with C.I. grating brick 4.00 No 1212.00

masonry chamber and water tight C.I. cover with frame

of 300mm x 300mm size (inside) with standard

weight.(i) Square mouth traps.(B) 150mm x 100mm size

P or R type

85 Constructing Brick masonry road gully chamber 500mm 4.00 No. 1557.42

x 450mm x 600mm including 500mm x 450mm C.I.

horizontal grating wih frame complete.

86 Constructing brick masonry chamber for underground 10.00 No 2591.66

C.I. Inspection chamber and bends with briocks having

croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

87 Providing laying (to level or slopes) and jointing 50.00 RMT. 214.12

reinforced concrete Light duty non-pressure pipes I.S.

class NP2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing

of joints complete. (B) 150 mm dia.

88 Providing laying (to level or slopes) and jointing 50.00 RMT. 232.30

reinforced concrete Light duty non-pressure pipes I.S.

class NP2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing

of joints complete.(C) 250 mm dia

Item Rate In

Description of Item Quantity Unit Amount

No figures

89 Providing laying (to level or slopes) and jointing 120.00 RMT. 447.43

reinforced concrete Light duty non-pressure pipes I.S.

class NP2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing

of joints complete.(D) 300 mm dia

90 Providing & fixing G.I. Rain water spout of 50 mm.dia & 10.00 No. 101.00

30 cm length etc.

91 Providing and fixing in position cowel went to pipes.(C) 10.00 No. 498.94

92 Providing erecting and fixing double coated Syntex PVC. 6000.00 Lit 4.65

(ISI) water tank of required capacity each with all

necessary fittings and connection etc. complete on

93 Box cutting the road surface to proper slope and camber 152.25 CMT. 66.05

for making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50Mt.lead. For Any Type of Soil.

94 Providing and filling rubbles including hand packing and 29.00 CMT. 920.11

filling interstices with quarry spalls behind abutments

and between returns as directed.

95 Providing & laying cement concrete Pavement using 64.13 CMT. 3963.24

M.200 & Vaccuum Dewatering technique including

floating surface with a skim powder floater, curing etc.

96 Rolling and consolidation of soling including filling in 80.00 SMT. 17.27

depression which occur during the process, with power

roler 8 tonne to 12 tonne.

97 Providing and fixing pre-cast Rubber Dye inter locking 80.00 SMT. 616.10

concrete block 60mm thick with grade of concrete M200

pnumatic compressed by mechanically pressed and as

per approved design including 75mm Sand layer for

levelling and filling the joint with sand in proper line and

level etc complete.

98 Providing and fixing pre-cast concrete kerb stone of gray 40.00 RMT. 316.13

cement based concrete block 30cm length,30cm height

and 15cm thick of M250 grade concret as per approved

design and including excavation for fixing in proper line

and level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

Item Rate In

Description of Item Quantity Unit Amount

No figures

99 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 246.00 Pts 424.20

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (a) with medium class Rigid

PVC pipe and accessories erected flushed on wall/ceiling

complete Cat. III

100 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 20.00 Pts 212.10

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (a) with medium class Rigid

PVC pipe and accessories erected flushed on wall/ceiling

complete Cat. III w/c Cat.III

101 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 121.00 Pts 606.00

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade

FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME four or more

step type electronic fan regulator with separately

mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed. (a) with

medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete Cat. III

Item Rate In

Description of Item Quantity Unit Amount

No figures

102 Point wiring for Individual Plug with & earth wire of 1.5 10.00 Pts 449.45

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories. [I] For 6A Plug

and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (a) with medium class Rigid

PVC pipe and accessories erected flushed on wall/ceiling

complete Cat. III

103 [III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. 26.00 Pts 797.90

Wire with 2.5 sq.mm ( green) earthing wire from mcb d b

board. (a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete

104 Point wiring for on board Looped Plug with 6A Modular 38.00 Pts 242.40

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories Cat. III

105 Providing following type of Modular Type Accessories 58.00 Nos 25.25

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed by

Engineer In charge. (7) Blank Plate Single Cat.III

106 Providing and erecting ISI mark Medium class RIGID PVC 235.00 Mtr. 23.23

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed

107 Providing and erecting Mains with 1.1 KV grade FRLS 1145.00 Mtr. 80.80

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) with

medium class Rigid PVC pipe and accessories (b) 2 wire

Item Rate In

Description of Item Quantity Unit Amount

No figures

108 providing and erecting Mains with 1.1 KV grade FRLS 230.00 Mtr. 262.60

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth

continuity of following size (A) with medium class Rigid

PVC pipe and accessories (h) 4 wire 6 sq. mm

109 Supplying and erecting Flexible PVC insulated multi 462.00 Mtr. 45.45

strand multi core 1.1 kv grade ISI marked copper wires

of following size to be erected as directed. e) 1.50 Sq.mm

3 core round PVC sheathed

110 Providing & erecting Switch board for Computer or 4.00 Nos. 1151.40

electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame

covered with textured/metallic /white front

plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories

111 Decorative call bell Ting-tong box type 250 volts 2.00 Nos. 70.70

complete erected

112 Supplying and erecting LED indoor fittings with LEDs of 73.00 Nos. 599.94

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED efficiency-110

lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA /

SEOUL/Bridgelux make LED used for luminaire. ( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of

wattage capacity between the ranges shown.) (A) Tube

Light with integral driver (d) 22-24 Watts, Surge - 2KV,IP-

20, 4 feet Cat-lll

113 (B) LED Lamps integral type, with PC diffuser suitable 20.00 Nos. 181.80

LAMP holder (b) 5 to 8 watts cat-II

Item Rate In

Description of Item Quantity Unit Amount

No figures

114 Supplying and erecting LED indoor fittings with LEDs of 152.00 Nos. 1228.16

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED efficiency

lumens/watt.

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA /

SEOUL/Bridgelux make LED used for luminaire. ( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of

wattage capacity between the ranges shown.) (C)

Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting

clips complete.IP20 (C) 22-24 watts, Surge-2 KV cat.III

115 Supplying and erecting LED street light / Flood light 8.00 Nos. 8110.30

fittings with High power White LEDs wattage of 1Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name

engraved or embossed 120 to 300 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to 5700K,

Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.CREE /

OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/

BridgeLux (U.S.A.) make LED used for luminaire. (

fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage

any wattage capacity between the ranges shown.) (A)

Street Light (IP-65), Surge protection -4KV integral and

10 kv non integral ,Light must have 440VAC line supply

protection. It should withstand 48 hours for 440VAC line

supply. (e) above 48 to 60 Watts Cat-lll

Item Rate In

Description of Item Quantity Unit Amount

No figures

116 providing and erecting Approved make Four pole 8.00 Nos. 6352.90

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating up to

25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal

connections & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

117 providing and erecting Approved make Four pole 1.00 Nos. 8282.00

moulded case circuit breaker having breaking capacity

ICU of 35 KA. at 415 V. having normal current rating

125A. with Fixed thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal connections

& complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

118 Supplying & erecting approved make Four Pole 415V 1.00 Nos. 9191.00

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS for

(C)100-125A Cat-lll

119 providing and erecting Miniature circuit breaker single 80.00 Nos 116.15

pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark

120 Providing & erecting 240 V MCB double pole switch for 2.00 Nos 303.00

lighting Load (B Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following

capacity (b)40 Amp. Cat.III

121 Providing & erecting 415V MCB Four Pole Switch for 6.00 Nos 656.50

Lighting Load (B curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following

capacity (b)40 Amp. Cat.III

122 Providing and erecting Sheet Steel powder coated MCB 4.00 Nos 2766.39

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for (B) three

phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI) (b) sheet steel

double door (ii)6 way

Item Rate In

Description of Item Quantity Unit Amount

No figures

123 providing and erecting Approved make ELCBs / RCCBs 12.00 Nos. 2636.10

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz.

having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic

component. for following Max. rating erected as directed

(ii) 40Amps. DP Cat. III

124 providing and erecting Approved make Earth fault Relay 1.00 Nos. 5130.80

suitable to mount with inter connection suitable to

following size of moulded case circuit breaker having CT

ratio & MCCB rating as following along with shunt trip

220V AC. with all internal connections & complete

erected in existing M.S.housing.. (2) 125 A -200 A , CT

Ratio 1/200

125 Supplying and erecting triple pole & neutral 440V / 500V 1.00 Rmt. 3030.00

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence

of following current carrying capacity, erected with

necessary bus bar supports /insulators, main cable

socket to each bar, erected in existing cubical panel with

necessary connections. (B) Suitable for 200 Amp.

126 Providing and erecting Annealed bare Copper wire 8 to 40.00 Kg. 717.10

Item Rate In

Description of Item Quantity Unit Amount

No figures

127 Supplying & erecting earth pit of minimum bore 2.00 Nos. 5416.63

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at

no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must

be submitted. (a) For Electrical Installation up to 440V

in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Item Rate In

Description of Item Quantity Unit Amount

No figures

128 Providing & erecting weather proof, dust & vermin proof, 2.00 sq.m 17584.10

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per

approval from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors, 16 SWG

thick CRC M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction

of engineer-in-charge with erection of supplied switch

gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket,heavy duty

end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes

the cost of switchgears, bus bars, inter connecting mains

& Copper Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base beams) The

panel shall be supplied with following approved

manufacturers with following size. (A) The standard

companies switch gear shall be used and only

manufacturers at CPRI approved factory as per IEC

61439 for beneficial use. (i) with 350mm depth

129 Providing and erecting XLPE(IS:7098)(I)-88 ISI 98.00 Mtr. 185.84

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (A)

1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core)

130 Providing and erecting XLPE(IS:7098)(I)-88 ISI 64.00 Mtr. 479.75

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (D)

1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)

131 Providing and erecting XLPE (IS:7098)(I)-88 ISI 260.00 Mtr. 127.26

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of

cables (b) 4 core 6 Sq. mm

132 Making trench in soft soil of suitable width of 90 cm deep 140.00 Mtr. 54.54

for laying cable or locating the fault all over the run and

back filling the same and making the surface as normal

Item Rate In

Description of Item Quantity Unit Amount

No figures

133 Providing & laying approved make Double walled 84.00 Mtr. 93.93

corrugated pipes (DWC) of polyethylene(conforming to

IS 14930 II )with necessary connecting accessories of

same material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable (A)50 mm outer dia

134 Providing & laying approved make Double walled 56.00 Mtr. 211.09

corrugated pipes (DWC) of polyethylene(conforming to

IS 14930 II )with necessary connecting accessories of

same material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable (D)120 mm outer dia.

135 Providing and, fixing heavy duty flange type brass cable 1.00 Nos. 40.40

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. (b) 2 to 4 core 6 Sq. mm

136 Providing and, fixing heavy duty flange type brass double 1.00 Nos. 70.70

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (A) 3 &

1/2 / 4 core 25 Sq. mm

137 Providing and, fixing heavy duty flange type brass double 1.00 Nos. 141.40

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (D) 3 &

1/2 core 95 Sq. mm

138 Solder less crimping type Aluminium lugs conforming to 8.00 Nos. 15.15

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. (C) 16/25 Sq.mm.

139 Solder less crimping type Aluminium lugs conforming to 8.00 Nos. 40.40

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. (F) 95 Sq.mm.

140 Providing & erecting Approved make Ceiling Fan with 121.00 Nos. 2484.60

double ball bearing ISI mark with Condenser 230 volt

A.C.50 Hz 1200 mm sweep complete having 3 blades

aluminium body and blade sets having ornamental

design shanks , canopy erected with earthing. [ Make

shall be approved by Engineer in Charge]

Item Rate In

Description of Item Quantity Unit Amount

No figures

141 Supplying and erecting 19 / 20 mm. nominal bore 121.00 Nos. 126.25

Medium Class M.S. Pipe down rod erected duly painted

for fan complete with proper insulation without leakage

and earthing.

142 Supplying & erecting fan hook box of 10 mm M.S. round 121.00 Nos. 126.25

bar bounded to the RCC bars up to 50mm length each

side and pierced through a 16 Gauge M.S. box / Heavy

Duty PVC box complete erected concealed in Ceiling with

necessary finishing.

143 Providing 2.5mm.thick laminated acrylic sheet to cover 121.00 Nos. 20.20

the fan hook or Fan box.

144 Providing & erecting fresh air fan 250 mm dia with 14.00 Nos. 1838.20

square frame make of ABS body with louvers Cat.II

145 Supplying & erecting approved make SMC press 8.00 Nos. 555.50

moulded composite FRP. loop-in, loop-out approx. 2mm

thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements

with mounting clamp with nuts, bolts & washers suitable

for erection on pole with cable clamps& earth bolt of

following size of box. (b) 250mm x 200mm x 100mm

146 Supplying and erecting B class galvanised iron pipe 32 8.00 Nos. 404.00

mm outside dia 45 cm long duly welded on 20 cm x

cm x 3 mm thick M.S. base plate, erected on wall or

corner for mounting street light luminaire with necessary

hardware materials duly painted.

147 Providing & erecting water cooler having storage 2.00 Nos 55045.00

capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @

an ambient temp of 45˚ C. The outlet temp. of the water

should drop by 15˚C within a hour, The water cooler

should be comprising of hermetically sealed compressor,

fan motor, condensing unit, water tank surrounded by

evaporating, coil, thermostats, relay etc.complete with

necessary inlet & outlet connection. The body of water

cooler will be made from Stainless Steel.

148 Supplying & erecting 5 stage single reverse osmosis 2.00 Nos 28785.00

water purification system with M.S. powder coated

frame, prefilter housing with 'O' ring presediment filter

GAC filter, carbon filter suitable buster DC pump capacity

80 psi, mention with 40 psi inline type post carbon filter

auto low & high pressure switches with following size of

storage tank & LPH capacity & erected as directed with

one year comprehensive maintenance guarantee.[C]

Ltr / Hr with 250 psi 2 nos booster pump

Total Rs.

Item Rate In

Description of Item Quantity Unit Amount

No figures

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and

words) of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the

1 Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

4 there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

Dharampur ( R & B ) Sub Division Valsad ( R & B ) Division

Dharampur Valsad