CERTAIN B/R REPAIRS TO E/M INSTALLATION AND CONNECTED ITEMS IN DOMESTIC AREA AT AF-I UNDER GE (AF) JAMNAGAR NO.2

Amount

Removal of existing roof treatment consisting of screed bed, tarfelts etc, and removal of debris outside MD land complete all as specified and directed.

Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate), (Avg 50 mm thickness) in roof for padding to achieve the 1:40 slope complete all as specified and directed.

M&L for rendering 10 mm thick on concrete surface whilst the concrete is green, in cement mortar (1:4) finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacturer instruction complete all as specified and directed. Note:- WPC will be measured & Paid seperately.

M&L for water proofing treatment by applying one coat of oil base bituminous primer @ 0.3 Kg / Sqm with brush / roller, laying of 3 mm thick APP based polymer modified membrane reinforced non-woven polyester, weight not less than 3.50 Kg / Sqm and sealing all the over laps 100 mm in length side and 100 mm in width side of membranes laid with torch application complete all as specified and directed.

Supplying & applying asian paint smart care damp proof ultra or equivalent coating for roof of specific gravity 1.15 gm/cc & tensile strength of 2.9 Mpa on horizontal / vertical surface coating area 10 sqft/ltr. The system includes one coat of self priming smart care damp proof diluted with 33% of water per ltr with brush over 2 coat of waterproofing smart care damp proof without any dilution of thinner/ water with roller to achieve a min thickness of 1 to 2mm complete as per manufecturer specification complete all as specified and directed.

Supply only liquid water proofing compound

Taking down steel water tubing and connection 20mm dia bore and removing from site complete all as specified and directed.

Supply and laying of GI 20 mm bore tubes, medium grade, galvanised, with all fitting;laid in trenches fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

All as per item No 10 above but refixing old steel tubing 20mm bore and connections in new or old position (walls, ceiling, or laid in floors) complete all as specified and directed.

Disconnecting existing tanks exc 500 ltr and n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning repairing, etc. complete all as specified and directed.

Dismantling water tanks of capacity exc 250 and n.exc 500 ltrs complete all as specified and directed.

Dismantling water tanks of capacity exc 500 and n.exc 1000 ltrs complete all as specified and directed.

Supply and fix 500 litres capacity, rotational moulded, polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with 25mm dia GI tank nipple of for inlet, outlet, washout and overflow etc complete all as specified and directed.

Supply and fix 1000 litres capacity, rotational molded, polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with 25mm dia GI tank nipple of for inlet, outlet, washout and overflow etc complete all as specified and directed.

Taking down rainwater / drain pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

M&L for repairing of chajja / roof projection by taking down old plaster, damaged concrete surface, cutting of exposed reinforcement and making good with CM 1:4 including admixture of SBR (cost of SBR including) as per manufacture, and provide reinft cement concrete 1:2:4 type B1 as required, necessary scafolding, formwork etc up to 9 Mtr height and applying 10 mm thick rendring in cement mortar 1:3, finishing the surface even & smooth with out using extra cement complete all as specified and directed. Note: Reinforcement will be measured and paid separately.

Taking down shutters of any description n.exc 1 sqm each

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each

Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5 sqm complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) .exc 1.5 sqm and n. exc 4.0 sqm area of each complete all as specified and directed.

S&F IInd class H.W. plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S & F 35 mm thick IInd class HW glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered surrounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters complete all as specified and directed.

M&L for 35mm thick IInd class HW plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S & F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent coment for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, including stainless steel butt hinges 100 mm long, aluminium tower bolt 100 mm long and aluminium handle 150 mm long as per specification and complete all as specified and directed.

S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40 mm to wooden / iron / aluminium frame with wooden / iron / aluminium beading and fixed with nails / nut & bolts or wire staples complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty / rubber beading and screw in sqm n.exc 0.50 sqm in each pane fixed to wooden / metalic frame complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick figured glass pin head type glazing with oil putty n.exc 0.50 sqm in each pane fixed to wooden/metalic frame complete all as specified and directed.

M&L for welding in repairs over metal/steel surfaces of any thickness exc 2.5 cm & n exc 5 cm in length complete all as specified and directed.

M & L for 100mm long butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed.

M & L for 75mm long butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S&F 100mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S&F 150mm long aluminium handle fabricated type anodised complete all as specified and directed.

S & F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F in repair 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F in repairs 150mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F in repairs 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F in repairs 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of steel cast or extruded section or cast aluminium alloy complete all as specified and directed.

S & F in repairs 25 mm dia curtain rails, mild steel, chromium plated with fixing brackets / concealed brackets & holders, stops, rollers etc.decorative type complete all as specified and directed.

Repairs and fixing only existing curtain rails, mild steel, chromium plated with fixing brackets / concealed brackets & holders, stops, rollers etc.decorative type complete all as specified and directed.

S&F mild steel hold fast and similar works fabricated with mild steel section conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) for fixing hold fast including necessary formwork, complete all as specified and directed.

Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed.

M&L for preparing sufaces of new, previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and priming with pink primer and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F in repairs hasp and staple 75mm size, of aluminium anodised including bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F 300 mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs door closer hydraulically regulated, designation No.2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed.

M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window (two shutters glazed) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in member for wire gauge section shall be 18.00 x 25.00 x 1.35 (Section No 20791). position, concelled type lock for all two shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall be of size 92.00 x 31.75 x 1.50 mm (Section No 20831) (b) Frame (bottom) section shall be of size 92.00 x 31.75 x 1.50 mm (Section No 20832) (c) Top & side members of shutter section shall be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom members of shutter section shall be of size 18.00 x 40.00 x 1.55 (Section No 20736) Note:- Section No given above are of make Jindal, contractor may use similar section of other make mention in Appx B.

M & L for aluminium doors, powder coated (of approved colour), with frame of section 100 x 44mm x 2.5mm thick and shutter with bottom rail of section 150 x 44.5 x 2.5mm thick, middle rail of section 85 x 44.5 x 2.5mm thick and top rail of section 80.4 x 44.5 x 2.5mm thick and styles of section 80.4 x 44.5 x 2.5mm thick with 4mm thick glass (plain / tinted / with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150mm wide and 2.5mm thick including 150mm aluminium tower bolt, brass mortice lock complete all as per drawing No.CEAA/TD/63 sheet No. 2.2 complete all as specified and directed including taking down old door complete all as specified and directed. Note:-(i) Section No given above are of make Jindal, contractor may use similar section of other make mention in Appx B. (a) Frame (top & side) section shall be of size 101.60 x 44.75 x 2.40 mm (Section No 14021) (b) Verticle member section shall be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top of shutter Section shall be of size 83.51 x 44.45 x 2.00 (Section No 19581) (d) Lock rail (middle member) section shall be of size 150.00 x 44.45 x 3.00 (Section No 19596) (e) Bottom Members of shutter section shall be of size 150.00 x 44.45 x 3.10 (Section No 19584) (f) glazing clip of securing glass of shutter shall be of 0.80 mm thick (Section No.19370)

S&F aluminium (powder coated with approved colour) ventilator, partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frostade glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aperture with 25x3mm thick aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete all as specified and directed. Note:-(i) Section No given above are of make Jindal, contractor may use similar section of other make mention in Appx B.

M&L for customizing and providing 12mm toughened glass plain/frosted of required size and shape with eaching of line diagram, in any pattern with chamfered edges including writing work, making holes on all for corners for fasteners and fix the complete unit over SS pivot and heavy duty floor spring/door spring along with required foldable SS hinges , SS railing of required length and SS 304 back to back glass door handle of avg length 300mm incl rubber gasket all around complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M & L for framed work such as grills, gratings, etc. with ends of bars houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparation of new surfaces of steel exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel over, governing pivot made of brass, other parts made of mild steel heavy duty including taking down of aluminium / glass / toughen glass shutter complete all as specified and directed.

Resecuring or easing & adjusting with taking down the shutter of any description exc 1 Sqm and n.exc 2 Sqm and fixed in same opening complete all as specified and directed.

Resecuring or easing & adjusting with taking down the shutter of aluminium / metalic shutters exc 1 sqm and n.exc 2 sqm and fixing in same opening complete all as specified and directed.

M&L for chipping / dismantling of loose damaged concrete removed carefully by using mechanical concrete upto good parent concrete to expose the existing reinforcement (direct hammering should be avoided) average thickness of chipping average 20-70 mm alround lintel / beams / column upto 10 mtr height including scaffolding complete all as specified and directed.

Supplying and application of rust remover / converter (Reebaklens RR of M/S fosroc chemicals India ltd or equivalent as approved) over the corroded reinforcement bar wherever / polymer modified mortar micro concreting is required and cleaning the same after application incl cost of all materials, rent of tools, scaffolding, cost of brushes etc. upto 10 mtr height complete all as specified and directed.

M&L for providing and fixing shear key using 10 mm diameter TMT bars including drilling holes of 12 mm dia & 100 mm depth @ 300 mm spacing on all three sides of lintel/ beams and providing new TMT bars of same dia of reinforcement where as found reduced to less than 20% of original dia including tack welding and grout the holes of shere key with two component epoxy resion based anchoring grout master flow 935 of BASF / Lokfix P of fosroc by power gun complete all as specified and directed. Note: (i) Quoted rate is deemed to be inclusive of providing reinforcement & welding. (ii) The entire activities shall be followed as per manufaacturers instructions. (iii) Quoted rate is deemed to be inclusive of all activities).

M & L for grouting of all RCC structure with low viscous two parts of epoxy (Mixed in ratio as specified by manufacturer) Neofill LV by using preassure pump including drilling necessary holes of required size at distance of about 30 to 50 cm centre to centre as required, fixing of PVC nozzles by quick setting ready made epoxy based plugging putty, scaffolding, and preassure grouting with compressor at about 1kgf to RCC beams / chajjas / slabs / coulumns at all heights as per manufactureres instruction and as directed by Engr-in-Charge upto 10 mtr height. Make of Low viscous epoxy shall be Neofill of M/s Fosroc/EPCO-KP-250+EPCO -250 of M/s Krishna conchem or equivalent of FOSROC, PIDILITE, HARIOM POLYMERS (P) LTD / SIKA. Note : (i) Payment shall be made as per the weight of epoxy formulation as calculated based on net contained weight of epoxy actually consumed in the work. (ii) The sealed container shall first to be brought to the site and handed over to MES store and thereafter to be used as and when required in the presence of MES executive. (iii) Record of day to day consumption with location and date etc shall be maintained in the serially numbered certified bounded register with shall be signed by contractor and Engr-in-Charge. (iv) The quoted rate is deemed to include the cost for sealing of cracks required for grouting purpose.

Supplying and application of nitobond EP (Manufactured by M/s Fosroc chemicals India Ltd, Krishna conchem or equivalent as approved, epoxy bonding agent over the old concrete surfaces including the cost of all materials, rent of tools, scaffolding, cost of paint, brush etc. upto 10 mtr height complete all as specified and directed.

M&L for rendering 20 mm thick polymer modified mortar over face of Concrete of column / beams etc. for height upto 10 mtr in CM mortar 1: 3 along with adding up of SBR latex of M/s Fosroc or equivalent as per manfactueres instruction and finishing even and smooth complete all as specified and directed. Note : (i) SBR latex will be measured and paid seperately. (ii) Cost of scafflding upto 10 mtr height shall be deemed to be included in the cost.

Supply of SBR Latex or equivalent chemical of M/s Fosroc

Supply and provisioning renderoc RG (manufactured by M/S Fosroc chemicals India Ltd) to an average thickness of 50-70 mm for beam and column, fluid micro concrete shall be mixed with 6mm down coarse aggregate and specified quantity of water and mixed using a power operated slow speed stirrer and pouring inside the formwork including the cost of all materials, rent for tools, scaffolding, formwork and labour charges upto 10 mtr height complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia, cut to length, bent to shape required including bending, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No 76 above but 6 to 8mm dia deformed bars in stirrups.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debris to a distance exc 1.5 km but n. exc 2 km. complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 in two layer 10mm and 5mm on brick work /concrete surfaces/ PCC block/stone masonry wall surface, including mixing liquid water proofing compound in second layer only as per manufacturers instructions, finished the surface even & smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured & paid separately

M&L for rendering 15 mm thick on masonry masonry wall surface in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls & applying two coats of distemper oil emulsion over a coat of primer over and including cement base wall care putty on wall surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement Base paint over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debris to a distance exc 1.5 km but n. exc 2 km complete all as specified and directed.

M&L for non skid, joint free (edge cut) coloured ceremic tiles 7 to 8 mm thick (Square / rectanguler) polished area of each tile exceeding 0.11 sqm but not exeeding 0.18 sqm (size 400x400) as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M&L for non skid, joint free (edge cut) coloured ceremic tiles 7 to 8 mm thick area of each tile exc. 0.18 sqm but not exc. 0.38 sqm, (square / rectanguler) size 600x600 mm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M&L for joint free (edge cut) coloured glazed ceramic tiles 7 mm to 8 mm thick (square / rectangular) of size 300 mm x 450 mm incl highliter as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M & L for framed work such as grills, gratings, etc. with ends of bars houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and directed.

Dismantling structural steel work any type and any discription etc. complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or including butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed.

Dismantling of plain or corrugated asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip fixed with self tapping screws complete all as specified and directed.

M&L for preparation of new steel surfaces, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

S& F steel rolling shutters of thickness 1.25mm gear operated type with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one soap coat of primer; erected in position as indicated, including removal of old complete all as specified and directed.

Dismantling posts or struts of (RCC,wooden or steel) any section, including taking out embedded portion in concrete or brick work of any position place including swan neck fencing post and making good to disturbed portion complete all as specified and directed.

Dismantling fencing wire mesh / chain link fencing, any type complete all as specified and directed.

Excavating in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50 m and making good surface in soft / loose soil complete all as specified and directed.

Supply & fix mild steel section for post and struts for fencing including cutting top to shape as directed drilling hole notching for wire etc. or flat iron fillet (for securing wire mesh etc) including all necessary drilling bolting, using steel section of grade E-165 (Fe-290) complete all as specified and directed.

S&F irons steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, n. exc 5cm long, diameter of neck 5 to 10mm complete all as specified and directed.

Supply and fix 10 mm dia mild steel round bar as in line wire for chain link fencing fixed with GI wire complete all as specified and directed.

Supply only chain link MS Galvanised fencing conforming to IS 2721: 2003, size as per direction complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

M&L for cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in, foundation, filling, mass concrete etc complete all as specified and directed.

S&F of polyolefine all weather proof polymer machine knotting using CNC shines with DSLC technology for HDPE anti bird protecting netting dia of the net 1mm, mesh size 25mm square mesh with mesh making strength 18 Kgf of colour white / black as per specification with 10 years life (10 years warranty) including fixing with accessories fixing material required for fixing complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness below or above ground level, including removal of debris outside MOD land complete all as specified and directed.

Dismantling of PCC paver block / tiles of any description or thickness laid dry from path/ hardstanding in floors, aprons etc. complete all as specified and directed.

M&L for providing 75 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 grade over sand cushion complete all as specified and directed. Note- Sand will be measured and paid separately.

M &L 25mm thick sand filling (sand cushioning) under path for laying interlocking paver blocks complete all as specified and directed.

M&L for outdoor coloured vitrified paving tiles, joint free (edge cut) of size 300 mm x 300 mm x 9 to 10 mm thick as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over 15mm screed bed or bedding in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick backing coat in CM 1:4 and jointed complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 22mm thick over 15mm screed bed or bedding in CM 1:6 laid, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

S t modi (BID ID -3135160)

suvidhiconstruction (BID ID -3129003)

R.H.ENTERPRISE (BID ID -3128460)

DWARKADHISH ENTERPRISE (BID ID -3136106)

Indice Technologies (BID ID -3136987)