PROVISION OF INTERLOCKING TILES AT AUDITORIUM INS SATAVAHANAS SPECIAL REPAIRS TO BUILDING NO P14 B AT INS VIRBAHU AS and AS TO BLDG NO P 192 AT NAVAL PARK NORA PROVISION OF SOLAR WATER HEATING SYSTEM FOR SHIPS GALLEY BLDDG NO P 24 and JUNIOR SAIL

Amount

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft / loose soil complete all as specified and as directed.

Removing excavated materials to a distance n. exc. 50m and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

M&L for 75 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and as directed.

M & L for Plain Cement Concrete 1:2:4, Type B-1, using 20mm graded aggregate as in Sub base / levelling course 40 mm thick, for flooring complete all as specified and as directed.

M & L for 50mm thick Sand filling in floors or under interlocking paver tiles including watering and consolidation complete all as specified and as directed.

M & L for Machine pressed precast cement concrete coloured Glazed interlocking paver block any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M - 35 Grade with grey cement and pigment all as directed by Engineer-in-Charge. Make: Bharat / NITCO/METRO/VITCO/NMCO

M&L Plain cement concrete1:3:6 type B-1(using 20mm graded stone aggregate) as in side packing / haunching of paver block etc complete all as specified and directed.

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, and disposal off debris and rubbish to out side MD land complete all as specified and as directed

M&L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded granite stone aggregate) in sub base of floorings complete all as specified and as directed.

M & L for Coloured Non Skid ceramic tiles 7 to 8 mm thick (Square/ Rectangular) area of each tile exceeding 0.18 Sq. M but not exceeding 0.38 Sq. M, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including screed bed or bedding layer in cement mortar 1:6, 15 mm thick, complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M & L for Coloured Non Skid ceramic tiles 7 to 8 mm thick (Square/ Rectangular) area of each tile exceeding 0.18 Sq. M but not exceeding 0.38 Sq. M, in skirtings/dado etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including backing coat in cement mortar 1:4, 10 mm thick, complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

Providing and injecting chemical emulsion for Anti termite Treatment to soil under existing floors using chemical emulsion @ 1 Ltr per hole, 300mm apart on both directions including drilling and plugging 12 mm dia holes with CM 1:2 to match the existing floors complete all as specified and as directed.

M & L for cutting / chipping the spalling concrete surfaces of columns, beams, slabs, cantilevers, chajjas etc cleaning to receive plastering / guniting complete all as specified and directed.

M & L for Providing pressure guniting on existing pealed concrete surfaces 40mm thick average in cement mortar 1:3 for Columns /fins / Beams etc. and applying Epoxy Treatment [Nito Bond AR of M/s. Fosroc / suitable chemical in M/s. Dr. Fixit / Araldite] including application of one coat of notozinc primer to the exposed reinforcement wherever required prior to guniting to facilitate proper bonding with old surfaces complete all as specified and as directed. Note : The rate quoted shall be deemed to be inclusive of necessary steel double scaffolding and removal of the same after completion of work.

M & L for Providing pressure guniting on existing pealed concrete surfaces 30 mm thick average in cement mortar 1:3 for soffits of slabs, parapets, Chajjas etc. and applying Epoxy Treatment [Nito Bond AR of M/s. Fosroc / suitable chemical in M/s. Dr. Fixit / Araldite] including application of one coat of notozinc primer to the exposed reinforcement wherever required prior to guniting to facilitate proper bonding with old surfaces complete all as specified and as directed. Note : The rate quoted shall be deemed to be inclusive of necessary steel scaffolding and removal of the same after completion of work.

M&L for rendering 15 mm thick in CM 1:4 on brick or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:6 on brick or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and as directed.

Labour only for welding in repairs exc 2.5cm but n.exc 5cm in length for thickness of metal exc 6mm but n.exc 9mm complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc., and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Forming jambs etc, to openings, including cutting, toothing and properly bonding into old work, also facing, joining and pointing to match existing work complete new work built in cement mortar 1:6 complete all as specified and directed.

Demolition of reinforced cement concrete ( reinforcement cut as required to facilitate demolition )in any floors/ roofs,beams, stair cases , Landings , Chajjas and similar suspended articles and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 including provision of 2Nos 8mm dia TMT bars at every fourth course complete all as specified and as directed

M&L for PCC 1:3:6 type C1, (using 20mm graded granite stone aggregate) in M&L for PCC (1:3:6) (20mm graded aggregate) type C1 as in coping/hold fast bed blocks,bed plates,roof kerbs or similar items including necessary formwork stops moulds etc complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4sqm each with shutters without taking off shutters from frame incl mongry complete all as specified and as directed.

Taking down chowkats or frames not exceeding 1.5 sqm each with shutters without taking off shutters from frame incl mongry complete all as specified and as directed.

S&F Factory made second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 40 mm Flush shutters, [ ISI marked ] solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F aluminium powder coated window frame with shutters sliding pattern consisting of three tracked frame and 03 shutters (2shutters glazed with 4mm thick tinted glass fixed with suitable EPDM rubber beading and one shutter with stainless steel mosquito proof wire cloth made of 0.45mm nominal dia wire and average aperture 1.4mm) including Aluminium powder coated grill of make "Deco grill" and DG -202 model with aperture of size 60 X 40mm, suitable 'F' or 'E' sections fixed to window frame for securing Deco grill and necessary hanbdles/locking arrangements for shutter of Jindal sections Window Frame( Top & Sides) : 21137, Bottom L 20977, Window shutters : Top & Bottom : 20567, Sides : 20738 or equivalent of Hindalco & Indalco complete all as specified and as directed.

S & F [ISI marked] 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S & F Aluminium alloy anodised Sliding Door Bolt (ISI Marked) with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F 125 mm long [ ISI marked ] medium weight cold rolled mild steel butt hinges complete all as specified and as directed.

S&F 150 mm long [ ISI marked ] extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F mild steel angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles conforming to Fe 410-O or Fe 310-O complete all as specified and as directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and as directed. Make: M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

S&F of Harrison rails (Curtain rails) of anodised aluminium alloy chromium plated of bore exceeding 25 mm with fixing brackets stops, rollers etc complete all as specified and as directed.

M & L for providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment at points of contact of wood work by chemical emulsion [in oil or kerosene based solution] @ 0.5 litre per hole by drilling 6 mm dia holes at a downward angle of 45 degrees at 150 mm centre to centre and sealing the same complete all as specified and as directed.

Taking down PVC soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes. Bends, swan-necks etc.,complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) [ISI Marked] Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and as directed. Make : Supreme / Prince / KML classic Kisan

S & F 110 mm bore PVC ( SWR ) , bends of any radius complete all as specified and as directed. Make : Supreme / Prince

Preparing old surfaces of Ceilings by brooming down or by steel wire brushing, and applying two coats of white wash complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water,removal of rubbish to outside MD Land etc. complete all as specified and as directed .

M & L for preparation of newly plastered wall surfaces and applying two coats of weather proof anti fungal emulition paint [Apex ultima from Asian paints or equivalent] Acrylic Exterior emulsion paint of approved make and shade over a coat of approved primer as recommended by the manufacturer over putty [any number of coats] including sand papering on external walls / ceiling surfaces to obtain smooth finish complete all as specified and as directed. Make : (i) Weather coat paint :Apex ULTIMA from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux (ii) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

M&L for preparing newly plastered surfaces of internal walls, application of wall care putty (any number of coats required) and sand papering etc and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson Make for Distemper : Asian / Nerolac / Berger ( All 1st quality)

Demolition of un-reinforced cement concrete in any floors and pavings not exceeding 15 cm thickness, (Below or above ground level) and disposal of unserviceable materials, debris and rubbish to out side MD land complete all as specified and as directed.

M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring / hard standing / plinth protection complete all as specified and as directed.

Removal existing treatment any type, any thickness, Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc in multistoreyed bldgs, brushing neat cement slurry with 3 Kg of cement per Sqm,providing 25 mm thick [Average thickness] PCC 1:2:4 type B0 [using 12.5 mm graded aggregates], rendering 10mm thick in CM 1:4 mixed with water proofing compound @2% by weight of cement, Supply and Fix APP polymeric waterproofing membrane of 3 Kg / Sq.M incorporating a centre core of 90 micron thick HMHDPE film including coating the surface with a coat of water based bitumenous Primer @ 100 gms / Sqm, followed by a coat of blown bitumen of grade 85 / 25 or 90 / 15 @ 1.2 Kg / Sqm each at top and bottom of the membrane complete including sealing all joints by thermo fusion with minimum 10cm overlap, and on vertical surfaces the membrane shall be inserted in groves and packed in cement mortar 1:3 all as per manufacturers instructions complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under relevant item. MAKE : M/S HYPERPLAS IWL CHENNAI, M/S MULTIPLAS BY STP TEXES LIMITTED, GOREGOAN, M/S STP SUPERIOR POLY PLUS BY STP LIMITED, KOLKATTA, M/S SHIVAM TAR PRODUCTS

Supply only integral water proofing compound [ISI marked] complete all as specified and as directed. Make : Acco proof / Impermo / Lik proof / Scott No. 1

Removal existing treatment on vertical surfaces any type, any thickness, and washing down with water to remove dust etc in multistoreyed bldgs, rendering 10mm thick in CM 1:4 mixed with water proofing compound @2% by weight of cement, Supply and Fix APP polymeric waterproofing membrane of 3 Kg / Sq.M incorporating a centre core of 90 micron thick HMHDPE film including coating the surface with a coat of water based bitumenous Primer @ 100 gms / Sqm, followed by a coat of blown bitumen of grade 85 / 25 or 90 / 15 @ 1.2 Kg / Sqm each at top and bottom of the membrane complete including sealing all joints by thermo fusion with minimum 10cm overlap, and on vertical surfaces the membrane shall be inserted in groves and packed in cement mortar 1:3 all as per manufacturers instructions complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under relevant item. MAKE : M/S HYPERPLAS IWL CHENNAI, M/S MULTIPLAS BY STP TEXES LIMITTED, GOREGOAN, M/S STP SUPERIOR POLY PLUS BY STP LIMITED, KOLKATTA, M/S SHIVAM TAR PRODUCTS

M&L for green marble 16-18mm thick machine cut as in flooring and landings of staircase laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including screed bed or bedding layer in cement mortar 1:6, 15 mm thick or complete all as specified and as directed.

Excavating over areas not exceeding 1.5m deep and getting out in hard / dense soil complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in hard/ dense soil complete all as specified and as directed.

M&L for PCC 1:4:8, Type D2 ( using 40mm graded aggregates) as in bed concrete for foundation etc complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 complete all as specified and as directed.

M&L for Plain / Reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed blocks, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and as directed.

M&L for RCC 1:1.5:3 (nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for RCC 1:1.5:3 (nominal mix) as in lintle beams and roof beams complete all as specified and as directed.

Use and waste of flat Form work ( Rough finished ) to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exceeding 200 mm thick complete all as specified and as directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

S & F reinforcement using TMT steel bars of 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:4 on brick or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and as directed.

S & F Aluminium frame for doors, windows, ventilators, fixed partitions, frames & shutters, doors, window frames fixed type or three/two track windows including shutters with provision of two types of shutters such as two nos glazed and one number gauged one or more rebates including joining cleat for fixing etc including all necessary fittings and deco grill of not less than 5mm thickness ., with one or more rebates with powder coating of minimum 50 micron thick including joining cleat for fixing etc., complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

Returning, filling in including spreading leveling watering and well ramming in layers not exc 25cm in any type of soil complete all as specified and as directed.

Removing Excavated spoil to a distance execeeding 1.50 km but not exceeding 5 KM and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed.

M&L for Moorum / red bajri filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for 100mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) as in sub base of floor / pavings etc complete all as specified and as directed.

S&F vitrified tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and as directed. Make : Johnson / Nitco / Asian Granito / Varmora

M&L for Vitrified ceramic tiles 10 mm thick (Square / Rectangular) polished, Dark shade, area of each tile not exceeding 0.36 Sq. M, as in dado / Skirting etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and incuding rendering as in backing coat 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and as directed. Make : Johnson / Nitco / Asian Granito / Varmora

S&F Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for coloured glazed ceramic tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vetical surfaces such as dados etc over 10 mm thick rendering in CM 1:3 as in backing coat for fixing tiles on vetical surfaces such as dados etc complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

S & F GI snap grid frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick false ceiling of grid size 605 x 605 mm with GI "T" section of size 32 x 24 x 0.55 mm thick for main runners, 26 x 24 x 0.3 mm thick for cross runners and angle of size 20 x 20 x 0.55 mm thick along the walls suspended with and including 2 mm dia., Galvanized mild steel wire (as in suspenders of ceiling members fixed in proper position) including providing and fixing Gypsum Board 12 mm thick in ceiling fixed with screws as per manufacturer's instructions and applying two coats of plastic emulsion paint over a coat of primer over two coats of putty including sand papering till obtaining smooth finish complete all as specified and as directed. Make :(I) Make of Gypsum Board : M/s India Gypsum, M/s Saint Gobain (ii) Make of Putty : JK white cement / Birla wall care / Jenson & Nicholson (iii) Plastic Emulsion paint : Asian / Nerolac / Berger ( All 1st quality)

M & L for complete removal of existing treatment on walls, preparation of wall surfaces and applying two coats of weather proof Acrylic Exterior emulsion paint of approved make and shade over a coat of approved primer as recommended by the manufacturer on external walls /ceiling surfaces complete all as specified and as directed. Make : (i) Weather coat paint :Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux

S & F 15mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Tata / Zenith / Jindal

M & L for cutting chases, pinning in, making good the facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc, cutting n.exc. 10cm girth in stone, concrete block or concrete slab for concealling the water supply pipes complete all as specified and as directed

S & F 20mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Tata / Zenith / Jindal

S&F 75 mm bore PVC (SWR) soil, waste and vent pipes single socked in any length with rubber ring joints fixed to walls complete all as specified and as directed. Make : Supreme / Prince / Infra

S&F 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed. Make : Supreme / Prince / Infra

S&F 110 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. Make : Supreme / Prince / Infra

S&F 75 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. Make : Supreme / Prince / Infra

S&F Vitreous chinaware wash down water closet couple type of make Jaquar (Model No. ARS-39751P) complete all as specified and as directed. Make :M/s. Jaquar or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s Cera ( All are 1st quality)

S&F Chromium Plated Towel ring of Make Jaquar (Model No. ACN-1121BN) complete all as specified and as directed. Make :M/s. Jaquar or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s Cera ( All are 1st quality)

S&F Chromium Plated Towel Rack of Make Jaquar (Model No. ACN 1181N) complete all as specified and as directed. Make :M/s. Jaquar or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s Cera ( All are 1st quality)

S&F Soap Dispenser with glass body of make Jaquar (Model No. ACN 1135N) complete all as specified and as directed. Make :M/s. Jaquar or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s Cera ( All are 1st quality)

S&F Chromium plated toilet paper hilder with flap of Make Jaquar (Model no. ACN 1153N) complete all as specified and as directed. Make :M/s. Jaquar or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s Cera ( All are 1st quality)

S&F Chromium Plated hand shower / health faucet with NRV and 1meter long tube of Make Jaquar (Model No. Ald 579) complete all as specified and as directed. Make :M/s. Jaquar or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s Cera ( All are 1st quality)

S&F Chromium Plated bottle trap 32mm with 190mm and 300mm wall connection pipes and wall flange of Make Jaquar (Model No. ALD 769L 190x300) complete all as specified and as directed. Make :M/s. Jaquar or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s Cera ( All are 1st quality)

S&F Vitreous chinaware wash hand basin counter top model of make Jaquar (Model No. ARS WHT 39901) of size 420x420x135mm complete all as specified and as directed. Make :M/s. Jaquar or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s Cera ( All are 1st quality)

S&F Chromium Plated Pillar Tap of make Jaquar (Model No. ARI-39005B complete all as specified and as directed. Make :M/s. Jaquar or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s Cera ( All are 1st quality)

S&F Chromium Plated Fancy type 2-way bib tap of Make Jaquar (Model No. ARI-39041) complete all as specified and as directed. Make :M/s. Jaquar or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s Cera ( All are 1st quality)

S&F Chromium Plated Fancy type angle cock of Make Jaquar (Model No. ARI-39053) complete all as specified and as directed. Make :M/s. Jaquar or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s Cera ( All are 1st quality)

S & F Cast Iron Nahani trap of 100 mm outlet with grating including jointing to waste pipe fixed in cement concrete Type B1 1:2:4 complete all as specified and as directed.

S&F in repairs for PTMT PVC connecting pipe 15mm bore, 600 mm long suitable for cold / hot water to flushing cistern/ sanitary fittings with brass nut connections at the ends complete.Work up to 4th storey fitted with brass unions to connect iron pipe to PVC pipe on both ends complete all as specified and as directed. Make : Prayag / Watertec

M & L for flexible waste pipe 32 mm dia for with polyethylene union and check nuts 100 cm long complete all as specified and as directed.

S & F 6 mm thick beveled edge looking Mirror fixed with SS studs of First quality Belgium glasscomplete all as specified and as directed. Make of mirror : Saint Gobian / Modi / Asahi

S&F Chromium Plated body double arm wall mounted reversible magnifying pivotal mirror of make Jaquar (Model No. ACN 1193N) complete all as specified and as directed. Make :M/s. Jaquar or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s Cera ( All are 1st quality)

M&L 20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like laid on screed bed in cement mortar (1:4), 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F factory made solid PVC flush shutter 30mm thick wood free consisting if frame made out of MS tubes of 19mm gauge and size of 20mm x40mm for stiles as well as top and bottom rails. The inside pannel shall be coat of metal primer of approved make as per manufacturer. the inside panel shall consists of 20mm thich multichamber hollow pvc section of 1mm wall thickiness, bonded using solvent cement with 5mm thick plain/prelam pvc sheet of density 600kg/cbm manufactured by an iso 9000 certified company, on both sides of inside panel. all four edges for the panel to be sealed with lapping of 10mm thick and 20mm wide pvc sheet batten made by sticking 2 nos pvc sheet of 5mm thickness using solvent cement adhesive. door edge lipping to be painted pvc ink of matching colour of plain / prelam moulded of PVC sheet door of 20mm thick (5mm x 4 nos) thick pvc sheet to be given for locking provision complete all as specified and as directed..

S & F PVC ventilators with frame work shall be made of multi chamber hollow PVC section DWUF 405 (40X46mm). The glass (3mm thick pin headed) is fixed to the frame in the lower section using extruded PVC section having a dimension of 9mm X 14.5mm (GL-19 SINTEX PVC section) with EPDM gasket (SPL-003) for both the PVC sections. SINTEX make ventilator's centre mullion shall be made up of multi chamber hallow PVC section DWUF-406 (63.5mmX40mm) with EPDM gasket is used. GL-19 is fixed to the 3 sides of DWUF-405 and to one side of DWUF 406 (63.5X40mm) above the centre mullion. Glass panels with aluminium lower set is fixed to the frame DWUF-405 on the top of the ventilator for the glass. DWUF 405 and DWUF 406 corners shall be metre cut and welded, jointed with 12 mm MS rods (guard bars) and necessary fixtures Work up to 4th storey complete all as specified and as directed. Note for Item No. 101, 102 & 103: Make of PVC frame / shutter / ventilator shall be of make Sintex or equivalent in Nandi / Rajshri Plasti Wood.

S & F Aluminium anodised barrel Tower Bolt (ISI Marked) of size 150 mm long of extruded section complete all as specified and as directed.

S&F 100 mm long [ ISI marked ] medium weight cold rolled mild steel butt hinges complete all as specified and as directed.

S & F Aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg including taking down the existing fitting complete all as specified and as directed. Make : Godrej / Everite / Priya

Complete removal of existing treatment on walls, preparing surfaces of walls applying putty two coats and sand papering till obtaining smooth surface and applying two coats of plastic emulsion paint over a coat of alkali resistant primer complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

S & F Rotational moulded Polythene [HDPE] Water storage Tanks, Cylindrical & Vertical Type 500 Ltrs Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including dismantling existing water tank and removing to store complete all as specified and as directed. Make : M/s SINTEX , M/s POLYCON, M/s ROTEX, M/s POLY WELL

Supply and fix in repairs 15 mm dia brass ball valve (ISI Marked), high pressure, with polythene float and fly nut complete, screwed to iron pipe all as specified and as directed

S&F in repairs gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 15 mm dia complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

Preparing surfaces of ceilings and applying putty two coats and sand papering till obtaining smooth surface and applying two coats of plastic emulsion paint over a coat of alkali resistant primer complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

M&L for Rendering 10 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed.

Demolition of floor, hearth and wall tiles / stone slabs of any description or thickness as in floors, skirtings etc laid bedded and pointed in any mortar and removal of rubbish to out side MD land complete all as specified and as directed.

M&L for Non-skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes, over 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian.

S&F Glazed coloured ceramic tiles in vertical surface 450 x 300x 7 mm / 350 x 250 x 7 mm thick ,set and jointed in neat cement slurry and pointed in white or cloured cement over and including 10mm thick backing coat CM of 1:4 complete all as specified and as directed. Note : Rate includes for cutting for offsets etc Make : Johnson / Kajaria / Orient / Cera / Asian

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, etc., to store and rubbish to a distance not exc. 50m complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M&L for 12 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed with screws to frame work in partitions, shelves, cup boards, door panels etc. complete all as specified and as directed. Make : Anchor / Novopan / Deco Board / Bhutan Board / Kitply / Eco Board / Archidlam / Asis / Greenply Industries

S&F in repairs sink with drain board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 405 mm x 355 mm x 160 mm fixed in repairs complete all as specified and as directed. MAKE : M/S BLUE STAR MODEL NO. BSSBSD-52, / M/S JAYNA/ NIRALI

S&F 15mm bore Sink Cock with Regular Swingng spout (wall mounted with wall flange of make Jaquar ARI-39347S or equivalent complete all as specified and as directed. Make :M/s. Jaquar or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s Cera ( All are 1st quality)

S&F flexible waste pipe 40 mm bore with polyethylene union and check nuts 1000mm long suitable to steel sink waste complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections work complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections work complete all as specified and as directed.

M&L for 18 mm thick plywood, grade BWP, type BB fixed in with nails to timber frame work in repairs complete all as specified and as directed. Make : Anchor / century ply board Industries Ltd. / Archid ply / Kitply / True wood / Green ply

S&F 100mm (ISI Marked) long fancy type stainless steel handles complete all as specified and as directed.

S&F Telescopic hinge channels for cupboard drawers fixed to plywood with screws, complete all as specified and as directed

Complete removal of existing treatment on walls, preparing surfaces of walls applying putty two coats and sand papering till obtaining smooth surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

Complete removal of existing treatment on ceilings, preparing surfaces of walls applying putty two coats and sand papering till obtaining smooth surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

S&F continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30mm complete all as specified and as directed.

Supply and Fix Pre-painted galvalume aluminum zinc coating corrugated steel sheet of 0.50 mm thick[TCT] of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. MAKE : M/s TATA BLUE SCOPE, M/s LLOYD INSULATIONS INDIA LTD, M/s BUILD TECH / JINDAL

S & F Mild Steel work as in Tubular Trusses, Posts etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS - 1161, Grade YST - 240, Medium Grade of any dia complete all as specified and as directed.

S & F in repairs 75 mm, 6 Levers, with 2 keys, Brass Mortice Lock, vertical Type of Godrej make complete all as specified and as directed.

S & F in repairs Floor door stopper of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 150 mm complete all as specified and as directed.

M&L for preparing newly plastered surfaces of internal ceiling, application of wall care putty (any number of coats required) and sand papering etc and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson Make for Distemper : Asian / Nerolac / Berger ( All 1st quality)

M & L for applying one coat of weather proof Exterior emulsion paint of approved make and shade including preparation of surfaces as recommended by the manufacturer on surfaces of walls / ceilings of any hight bldgs complete all as spcified and as directed. Make : Apex ULTIMA from Asian Paints / All Guard from Berger / Weather Shield Max Exterior Acrylic from ICI Dulux

M & L for washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of oil bound distemper on wall surfaces complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All 1st quality)

M & L for washing, rubbing down and stopping of painted surfaces of ceilings and applying one coat of plastic emulsion on ceiling surfaces complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All 1st quality)

Stainless steel basket of Size of 386mm x 500mm x 100mm with Ext. width 450mm and Clear depth 525mm a in kitchen drawers modular type made out of stainless steel 4mm dia wire at 30mm c/c and fixed to 18 mm thick BWR grade plywood covered with 0.9mm thick decorative laminate of approved shade fixed on both sides with all fixing accessories all as shown on drawing enclosed with BOQ amendment on serial page No. 116 of CA. Work shall be carried out as per Cargo Tech installation guidelines complete all as specified and as directed and as shown on drawing of the foollowing items: Cuttlery basket, Tea cup basket, utensils basket, plain basket, thali basket, grain basket etc

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square /rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match including screed bed 15 mm thick in cm(1.4) up to 16th storey complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

S&F Non skid ceramic coloured tiles 7 to 8 mm thick (Square /rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm , as in skirting or dado set and jointed in neat cement slurry and pointed in white or cloured cement over and including 10mm thick backing coat CM of 1:4 complete all as specified and as directed. Note : Rate includes for cutting for offsets etc Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Plain Cement Concrete type C2, 1:3:6 (Using 40mm grded granite stone aggregate in concrete bed to drainpipes including packing under and haunching against the sides of pipes after they are laid tested for pipes of 150mm dia of pipes complete all as specified and as directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 150 mm dia., of pipe complete all as specified and as directed.

S&F 150mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B1 (Using 20 mm graded granite stone aggregate) as in sub base of floorings complete all as specified and as directed.

M&L for providing precast cement concrete 1:2:4 type B-1 using 20mm graded granite aggregates as in window or door cills, lintels, bressumers, steps, quion blocks, string courses, copings, kneelers, apex stones, pier caps, columns, posts, corbels with fair finish surfaces, including chamfers, weatherings etc set and jointed in neat cement mortar to match including necessary form work complete all as specified and as directed.

Dismantling the existing MS gate and refixing in another location, including cutting existing hinge and provision of new pintle hinge etc and all necessary accessories and shifting the gate manually or lifting into other location and erection in position with mechanical means, complete all as specified and as directed

M&L for RCC 1:2:4 Type B1 (using 20mm graded granite stone aggregates) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC 1:2:4 Type B1 (using 20mm graded granite stone aggregates) as in Columns, pillars, piers, posts and struts, etc. complete all as specified and as directed.

Use and waste of Fair finished flat Form work to sides of concrete foundations, rafts, plinth beams and similar work, vertical or batter complete all as specified and as directed.

Use and waste of Square, rectangular or polygonal Form work ( Rough finished )to sides of pillars, posts, struts, columns and stanchions complete all as specified and as directed.

M&L for cement concrete type B2 1:2:4 ( using 40 mm graded aggregate) as in surface channels and saucer drains without using of extra cement for smooth finishing complete all as specified and as directed.

M&L for RCC 1:2:4 Type B1 using 20mm graded granite stone aggregates for slabs supported on walls, beams and columns, in floors, roofs, landings and in shelves and the like complete all as specified and as directed.

Use and waste of Fair finished flat Form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exceeding 200 mm thick complete all as specified and as directed.

S & F 50 mm bore Galvanized Steel tubes, medium grade (ISI Marked) for for provisioning for cables through column (concealed) gate post lighting etc., fixed to walls or laid in floors / trenches complete all as specified and as directed. Make : Prakash / Tata / Zenith / Jindal

M&L 18 to 20mm thick granite (of any type) work (table rubbed and polished) as in wall lining (veneering to wall) and like laid on backing coat in cement mortar (1:3), 12mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Supply and laying hyperplas standard 3 Kg/Sqm polymeric water proofing membrane incorporating a centre core of 90 micron thick HMHDPE film including coating the surface with a coat of water based bituminous primer @ 100 gms/sqm followed by a coat of blown bitumen of grade 85/25 or 90/15 @ 1.2 Kg/Sqm each at top and bottom of the membrane followed by a coat of bituminous aluminium primer @ 100 gms/Sqm complete including sealing all joints by thermo fusion with minium 10 cm overlap all as per manufacturer's instructions.

M&L in repairs for point wiring with two runs of single core 1.5 Sqmm (nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLS (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore medium grade (ISI marked) Concealed/ Semi concealed / suface PVC conduit including flush type metal GI boxes for fixing modular switches, sockets, regulators etc. including provision of multistranded 1.5 Sqmm. copper conductor as earth wire connected to common earth dolly and earth in distribution board, including tee bend, elbows, junction boxes etc including taking down existing point wiring along with fittings and fixtures including taking down existing point wiring and making good the disturbed surfaces to match with the existing surface complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one way switch complete all as specified and as directed.

All as per item No. 155.00 above but for One 3 pin socket outlet 6 amps on independent board complete all as specified and as directed.

All as per item No. 155.00 here in before but for one 15 Amps power point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 2.5 sqmm multistranded and 2.5 sqmm PVC insulated unsheathed solid copper conductor cable as earth lead complete all as specified and as directed.

All as per item No. 155.00 here in before but for one geyser / AC Point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 4.0 sqmm multistranded and 4.00 sqmm PVC insulated unsheathed solid copper conductor cable as earth lead complete all as specified and as directed. [i] Note for Item No. 155.00 to 158.00 : MAKE :(i) CABLE : FINOLEX, PLAZA, POLYCAB/HAVELLS/GLOSTER/HARSH [ ALL ARE ISI MARKED FRLS CABLES ] (ii) PVC CONDUIT : AVON PLAST / GARWARE PLASTICS/ TENCOS LTD/KALINGA/FINOLEX / PRECISION [ ALL ARE ISI MARKED]. [ii] Note 2 : The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface.

S&F Sheet metal enclouser single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 amps capacity complete all as specified and as directed. Make : INDO ASIAN / STANDARD / HAVELLS

S & F switch piano flush type single pole 5 Amps AC 240V, 50HZ, complete all as specified and as directed. Make : Anchor / Bajaj / Leader / Cona

S&F ceiling rose surface bakelite 63mm dia with two to three terminals complete all as specified and as directed. Make : Cona / Anchor / Legrand

S&F Switch socket combination 2 in1, 3 pin, 5 Amp flush type,universsal complete all as specified and as directed. Make : Anchor / Bajaj / Cona

S & F Switch socket combination 3 pin, 15 A flush type complete all as specified and as directed. Make : Anchor / Bajaj / Cona

S & F steped type electronic fan regulator,flush type complete all as specified and as directed. Make: MK/Anchor (Roma)/ABB/Legrand

S&F in repairs Telephone jack deluxe with shutters 2 line with metal box complete all as specified and as directed. Make: Model No. 800130 RJ11 of Indo Asian/Anchor or equivalent in Bajaj or leader or Plaza

S&F in repairs LAN socket with metal box complete all as specified and as directed. Make: Model No. RJ 45 of Indo Asian/Anchor or equivalent in Bajaj or leader or Plaza

S&F in repairs TV outlet socket with metal box complete all as specified and as directed. Make: Model No. 930132 of Indo Asian/Anchor or equivalent in Bajaj or leader or Plaza

S & F Rigid non-metalic PVC conduit(20mmdia) exclusive of boxes (junction/ treminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc. complete all as specified and as directed. Make: AVON PLAST / GARWARE PLASTICS/ TENCOS LTD/ PRECISION/ KALINGA [ ALL ARE ISI MARKED ]

S&F switch Modular type single pole 6 Amps One Way AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F switch Modular type single pole 16 Amps One Way AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F Modular white cover plate with frame, but 3 module complete all as specified and as directed. Make: MK/Roma/ABB/Legrand

S&F Modular white cover plate with frame, but 4 module complete all as specified and as directed. Make: MK/Roma/ABB/Legrand

S&F Modular white cover plate with frame, but 6 module complete all as specified and as directed. Make: MK/Roma/ABB/Legrand

M&L for Sub main wiring with 4 runs of Single Core 6 sqmm [ for phase & Neutral ] PVC insulated multi stranded FRLS copper cable drawn through PVC conduit of 25mm bore with accessories along with 1 run of single core 6 sqmm copper cable as earth continuity conductor including taking down the old existing submain wiring by cutting the wall with machine and making good after completion complete all as specified and as directed. Note :- Four runs of 6 sqmm and one runs of 6 sqmm cable as earth along with PVC conduit will be measured as one length.

M&L for Sub main wiring with 2 runs of Single Core 6 sqmm [ for phase & Neutral ] PVC insulated multi stranded FRLS copper cable drawn through PVC conduit of 25mm bore with accessories along with 1 run of single core 6 sqmm copper cable as earth continuity conductor including taking down the old existing submain wiring by cutting the wall with machine and making good after completion complete all as specified and as directed. Note :- Two runs of 6 sqmm and one runs of 6 sqmm cable as earth along with PVC conduit will be measured as one length.

M&L for Sub main wiring with 2 runs of Single Core 4 sqmm [ for phase & Neutral ] PVC insulated multi stranded FRLS copper cable drawn through PVC conduit of 20mm bore with accessories along with 1 run of single core 4 sqmm copper cable as earth continuity conductor including taking down the old existing submain wiring by cutting the wall with machine and making good after completion complete all as specified and as directed. Note :- Two runs of 4 sqmm and one runs of 4 sqmm cable as earth along with PVC conduit will be measured as one length.

M&L for Sub main wiring with 2 runs of Single Core 2.5 sqmm [ for phase & Neutral ] PVC insulated multi stranded FRLS copper cable drawn through PVC conduit of 20mm bore with accessories along with 1 run of single core 2.5 sqmm copper cable as earth continuity conductor including taking down the old existing submain wiring by cutting the wall with machine and making good after completion complete all as specified and as directed. Note :- Two runs of 2.5 sqmm and one runs of 2.5 sqmm cable as earth along with PVC conduit will be measured as one length.

S&F in repairs MCCB 415 Volt, 50 Hz, 25 KA 3 Pole 100 Amps capacity complete all as specified and as directed. Make : Indoasian /Standard/Havells

S & F in repairs MCB SP 6 to 32 Amps, 240 Volts, C curve, complete all as specified and as directed. Make: Indo Asian / STANDARD / HAVELLS

S & F MCB TPN 63 Amps 240 Volts Gold plus C curve, complete all as specified and as directed. Make: Indo Asian / STANDARD / HAVELLS/Schneider

S & F VTPN 6 way DB double door 415 V having provision for FP MCCB (V-TECH) N3 frame upto 200 Amps in 25 KA [Frame 1] as incomer with IP 43 protection complete all as specified and as directed. Make: Indo Asican Cat part No. 811889 or its equivalent in L&T /STANDARD

S&F Distribution Board, TPN, 4 Way, Double door with 200 Amps bus bar complete all as specified and directed. Make : Indo Asian / Standard / Havells / HPL

S&F Distribution Board, SPN 8 Way ,Double door 240V with 200 Amps rated bus bar complete all as specified and as directed. Make : Indo Asian / Standard / Havells

S&F Distribution Board, SPN 4 Way ,Double door 240V with 200Amps rated bus bar complete all as specified and as directed. Make : Indo Asian / Standard / Havells

S & F MCB, SPN 40 Amps 240 Volts C curve, complete all as specified and as directed. Make: Indo Asian / STANDARD / HAVELLS

Supply, lay, joint, test and commission of LT cable 1100 V grade, [ISI marked] FRLS XLPE insulated, Screened, PVC bedded, Galvanised strip or wire armoured and sheathed, Aluminium conductor Cable of size 3.5 Core, 35 Sq.mm including cable glands, lugs, jointing materials etc laid in trenches / floors / ducts complete all as specified and as directed. Make: Polycab / Universal / Nicco / Havells

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm c/c reinforcement both ways, watering funnel, 20 mm dia light grade for protection of earth electrode 20 mm dia for watering complete all as specified and directed and tested on completion.

S&F Exhaust fan 230/240 Volts AC single phase oscillating 300 mm sweep heavy duty with loures with specification of 1400 rpm, input watt-82W, current 0.35A, free airflow - 1950 cum/hour and noice level 45-50db complete all as specified and as directed. Make : Crompton Greaves / Bajaj / Usha

S&F Ceiling fan 1200mm sweep 5 star rating complete with all accessories and making suitable hook in roof for hanging ceiling fan and making good complete all as specified and as directed. Make : Crompton Greaves / Bajaj / Usha

S & F Recess mounting LED down light 15 watts fitting designer with aluminimum diecast housing complete all as specified and as directed. Make: Jaquar Cat No. LNROO1RO15XC or equivalent make in BAJAJ/ HAVELLS / PHILIPS / WIPRO

S & F LED Mirror Light " Linnet " 10 Watts including taking down existing FTL fittings of any type complete all as specified and as directed. Make:Surya cat no SLE mirror 14 watts / Crompton Cat Part No LCL-10-CDL / HPL / Bajaj / Havells

S&F LED Tube light 20 W with retro LED T8 (PC) bar professional WH 5700K to 6200K and 1800 to 2000 Lumens of cool white Complete all as specified and as directed. Make : CG Cat No. LT8-20-865-2 equivalent in Philips/Bajaj/Surya.

S&F Automatic hand dryer of hand time 15-20 seconds, complete all as specified and as directed. Make : Dolphy Cat No. DETUAMHDRY 001 B or equivalent in jaquar

Supply and install hi wall split units indoor / out door complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with Eco Friendly R 410 A Refrigent gas minimum 5 star rating and EER 3.2 of capaccity 1.5 TR complete all as specified and as directed. Make : Carrier / Blue Star / Hitachi

Supply and Fix wall mounted voltage stablizer for automatic operation single phase naturally air cooled indoor type and design for input variation between 170V to 250V with accuracy + 2.5% and of 4 KVA capacity complete all as specified and as directed. Make : V Guard / Servo / Kee line

Supply, installation and testing of solar Water Heating system at 60⁰ C (Average) temperature comprising of following main accessories complete all as per manufacturers instructions and as directed. (a) Flat Plate collector (as per BIS 12933),01 No for each system of 300LPD (b) Stand for the collectors (c) Hot water tank (SS-304) TIG welded with PUF insulation & Stainless Steel Outer cladding (d) Stand for hot water Tank (e) Hydraulic steam hose pipe with check nut (f) Air vent 1 No for each system and 15 Amps Power point - 01 No Note: The quoted rate shall be deemed to be inclusive of PCC Bed for Solar stand and all accessories as per manufacturers requirement to make the system functional to achieve required parameters. Make : INTER SOLAR / RA COLD / TATA POWER / EMMVEE

S&F Brass Hot Water pipe 15 mm bore, duly insulated with 25mm thick bounded minerall wool performed "SYPHON" pipe section of density 144 kg/cum including wire mesh and aluminium foil cladding with all fittings and fixed complete to walls all as specified and as directed.

S&F Brass Hot Water pipe 20 mm bore, duly insulated with 25mm thick bounded minerall wool performed "SYPHON" pipe section of density 144 kg/cum including wire mesh and aluminium foil cladding with all fittings and fixed complete to walls all as specified and as directed.

Supply and Fix 750 litres capacity Rotational moulded Polythene [HDPE] Water Tanks, [ ISI Marked ] double layered, Cylindrical & Vertical Type including provision of 20mm dia spouts for connecting inlet, outlet, over flow and washout pipes hoisted and fixed in position complete all as specified and as directed. Make : M/s SINTEX , M/s POLYCON, M/s ROTEX, M/s POLY WELL

Supply and Fix Ball brass Valves [ ISI Marked ] suitable for 20 mm bore pipe , high pressure, with polythene float and fly nut complete, screwed for Iron pipe or brass ferrule complete all as specified and as directed. Make : M/s General Machine Tools & Engineering Works / Hind Trading & Mrs Co / Agarwal Products

S & F GI water tubing of 20 mm bore, medium grade (ISI Marked) conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors and connections and testing, complete all as specified and as directed. Make : Tata / Jindal / Prakash / Zenith

S & F in repairs 15 mm bore chromium plated bib tap of fancy type, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule including taking down the existing fitting complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S & F in repairs Fancy type chromium plated 15 mm bore Stop valves, with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions including taking down the existing fitting complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S&F gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm dia complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

M B CONSTRUCTIONS

SUNIL KUMAR GIRI