Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.4 LAccepted-AOC | ₹2.4 L | L1 | Accepted-AOC 1St Lowest |
| 2 | L2₹2.4 LRejected-Finance CHUANPUR N H 34 PO BERHAMPORE MURSHIDABAD WEST BENGAL | BERHAMPORE | MURSHIDABAD | WEST BENGAL | ₹2.4 L | L2 | Rejected-Finance 2nd Lowest |
| 3 | L3₹2.4 LRejected-Finance 19 2 SWARNAMOYEE ROAD P O P S BERHAMPORE DIST MURSHIDABAD W B PIN 742101 | BERHAMPORE | MURSHIDABAD | WEST BENGAL | 742101 | ₹2.4 L | L3 | Rejected-Finance 3rd Lowest |
Tender Value
₹2.4 L
EMD Value
₹5,000
Closing Date
2 Feb 2026, 5:00 pmClosed
Executive Engineer (A-I) BER-I(A-I) Division
24 Kalikapur Road Near air strip Maidan, Berhampore, Murshidabad
Maintenance of office Main Gate of Office Complex of The Executive Engineer (A-I), Berhampore-I (A-I) Division, Berhampore, Murshidabad. under Non Plan
2026_WRDD_990727_1
WRDD/EE/(A-I)/Ber-I/ eNIT- 18 of 2025-26
Open Tender
CIVIL WORKS
60 days
Berhampore
Please refer Tender documents.
4 documents required · 4 mandatory
₹5,000
17 Feb 2026
20 Jan 2026
5 Feb 2026
20 Jan 2026
2 Feb 2026
20 Jan 2026
Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes (i) Pakur Variety
Hire and Labour Charges for shuttering with hard wood for precast R.C. Slab curved, or stright and striking out the same including fitting, fixing the precast slab in position with necessary carriage and haulage, hosting etc, complete in all respect. (only the area in contact with concrete to be measured)
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes (i) Pakur Variety
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.Tor steel/Mild Steel (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel B) ( JSW/JSPL/SHYAM/SRMB/BMASL/ELECTRO STEEL/SSL) .Ground Floor
Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams and columns, lintels curved or straight including fitting,fixing and striking out after completion of works(upto roof of ground floor) (a)25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In- Charge.Ground Floor
Brick work with 1st class bricks in cement mortar (1:6) In superstructure,ground floor
12.5 cm thick 1st class brick work in cement mortar(1:4) in ground floor with approved H.B. netting in every third layer including scaffolding, raking out joints etc complete.ground floor
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:4 cement mortar (b) 15 mm thick plaster
M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge. In ground floor. (4.70 X 2.50 Mtr) @ 45 Kg /SqM
Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. In Ground floor: (iii) Two coats
(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)
Painting block letters or digits in Black Japan or any approved paint as per direction. e) Size above 7.5 cm. and upto 10 cm.
Size above 7.5 cm. and upto 10 cm.
Size above 12.5 cm. and upto 15 cm.
Add GST charges @ 18% of above
Add cess @ 1% of of above
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.46 MB
Tendernotice_2.pdf
PDF • 1.16 MB
BOQ_2422180.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid