Supply Installation of Pre-Fabricated Dwellings for Skill Development Centre

पावर ग्रिड कारपोरेशन ऑफ इंडिया लिमिटेड

POWER GRID CORPORATION OF INDIA LTD.

RHQ Vadodara WRTS-II

BILL OF QUANTITIES FOR Construction of Skill Development Centre (PEB) at 400/220 kV Rajgarh Sub-Station in WR-2

Name of Package: Construction of Skill Development Centre (PEB) at 400/220 kV Rajgarh Sub-Station in WR-2

(SCHEDULE OF RATES AND PRICES)

Bidder’s Name and Address (Sole Bidder) : To:

Name : Contract Services

Address : Power Grid Corporation of India Ltd.,

Western Region Transmission syatem -II

Plot No. 54, Near Riya revati resort ,

Sama - savli road, vadodara-390008

Installation Charges- Schedule Items for Construction of Skill Development Centre (PEB) at 400/220 kV Rajgarh Sub-Station in WR-2

Sl. No. Activity Header / Substation Name Service Code SAC Whether SAC in column ‘4’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Description (DSR'23 Items- Civil Works) Unit Quantity Unit Erection Charges Deduction of GST factor considered in DSR Unit Erection Charges excluding GST Total Erection Charges excl GST Total Tax GST @ 18% Total Erection Charges incl. GST

(Service Accounting Codes)

Schedule Items Civil as per DSR 2023

1 400/220kV Rajgarh SS 120000345 995433 18% 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge All kinds of soil. Cum 214.40 177.50 0.18 150.42 32250.38 5805.07 38055.45

2 400/220kV Rajgarh SS 120000391 995433 18% 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. Cum 175.00 196.00 0.18 166.10 29067.80 5232.20 34300.00

3 400/220kV Rajgarh SS 120000391 995433 18% 2.25 a) Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete Cum 543.00 700.50 0.18 593.64 322348.73 58022.77 380371.50

4 400/220kV Rajgarh SS 120000394 995433 18% 2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. Cum 63.09 2123.75 0.18 1799.79 113553.49 20439.63 133993.12

5 400/220kV Rajgarh SS 120000407 995433 18% 2.34.1 Supplying chemical emulsion in sealed containers including delivery as specified: Chlorpyriphos emulsifiable concentrate of 20% Ltr. 100.00 234.75 0.18 198.94 19894.07 3580.93 23475.00

6 400/220kV Rajgarh SS 120000410 995433 18% 2.35.3.1 Diluting and injecting chemical emulsion for Pre-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos E.C. 20% with 1% concentration Sqm 630.93 310.05 0.18 262.75 165778.74 29840.17 195618.92

7a) 400/220kV Rajgarh SS 120000437 995454 18% 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) Cum 0.72 7878.50 0.18 6676.69 4773.84 859.29 5633.13

7b) 400/220kV Rajgarh SS 120000442 995454 18% 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). Cum 63.03 6812.00 0.18 5772.88 363846.27 65492.33 429338.60

8 a) 400/220kV Rajgarh SS 120000470 995454 18% 4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) Sqm 71.61 410.85 0.18 348.18 24931.60 4487.69 29419.28

8 b) 400/220kV Rajgarh SS 120000473 995454 18% 4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Sqm 71.61 146.15 0.18 123.86 8868.82 1596.39 10465.20

9 400/220kV Rajgarh SS 120000477 995454 18% 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zoneIII) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. Sqm 85.80 749.30 0.18 635.00 54483.00 9806.94 64289.94

10 400/220kV Rajgarh SS 120000488 995454 18% 5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Cum 128.77 9045.75 0.18 7665.89 987152.46 177687.44 1164839.91

11 400/220kV Rajgarh SS 5.9 Centering and shuttering including strutting, propping etc. and removal of form for

a) 400/220kV Rajgarh SS 120000499 995457 18% 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 92.25 392.15 0.18 332.33 30657.49 5518.35 36175.84

b) 400/220kV Rajgarh SS 120000503 995457 18% 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 280.20 736.40 0.18 624.07 174861.92 31475.15 206337.07

c) 400/220kV Rajgarh SS 120000504 995457 18% 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 120.00 961.30 0.18 814.66 97759.32 17596.68 115356.00

12 400/220kV Rajgarh SS 120000543 995454 18% 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 12877.21 107.85 0.18 91.40 1176954.85 211851.87 1388806.72

13 400/220kV Rajgarh SS 120000601 995456 18% 6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 76.99 7132.25 0.18 6044.28 465376.71 83767.81 549144.52

14 400/220kV Rajgarh SS 120000615 995456 18% 6.12.1 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:3 (1 cement : 3 coarse sand) Sqm 338.34 931.75 0.18 789.62 267159.57 48088.72 315248.30

15 400/220kV Rajgarh SS 120000620 995456 18% 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. Sqm 338.34 104.80 0.18 88.81 30049.18 5408.85 35458.03

16 400/220kV Rajgarh SS 120000734 995474 18% 8.1.1.1 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble.Area of slab upto 0.50 sqm Sqm 100.00 5742.55 0.18 4866.57 486656.78 87598.22 574255.00

17 400/220kV Rajgarh SS 120000743 995474 18% 8.5 Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Each 14.00 978.70 0.18 829.41 11611.69 2090.11 13701.80

18 400/220kV Rajgarh SS 170000968 995416 18% 8.10.2 Providing and fixing rubbed stone slab table, edges rounded and polished, 75 cm high 50 cm deep and 18mm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade Sqm 5.00 4051.85 0.18 3433.77 17168.86 3090.39 20259.25

19 400/220kV Rajgarh SS 120003230 995474 18% 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Sqm 307.53 1267.95 0.18 1074.53 330447.22 59480.50 389927.72

20 400/220kV Rajgarh SS 120000755 995474 18% 9.1.2 Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood. Cum 0.45 116520.30 0.18 98746.02 44880.06 8078.41 52958.48

21 400/220kV Rajgarh SS 120000809 995476 18% 9.20.2 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Sqm 30.24 3167.95 0.18 2684.70 81185.43 14613.38 95798.81

22 400/220kV Rajgarh SS 120000938 995476 18% 9.74.1 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm EA 68.00 441.60 0.18 374.24 25448.14 4580.66 30028.80

23 400/220kV Rajgarh SS 120000952 995476 18% 9.81.1 Providing and fixing bright finished brass handles with screws etc. complete: 125 mm EA 68.00 256.65 0.18 217.50 14790.00 2662.20 17452.20

24 a) 400/220kV Rajgarh SS 120001081 995476 18% 9.147.A5.1 Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds. Three track three panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (70mm & above) x (40mm & above) & sash (25mm & above) x(50mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre). Sqm 58.50 8748.35 0.18 7413.86 433710.57 78067.90 511778.48

24 b) 400/220kV Rajgarh SS 120001081 995476 18% 9.147.C1.1 Fixed window / ventilator without mullion/transom: Using R1 series with frame(33 mm & above) x (35mm & above)(Height upto 0.90 metre). Sqm 7.20 8247.25 0.18 6989.19 50322.20 9058.00 59380.20

25 400/220kV Rajgarh SS 120001116 995476 18% 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Kg 200.00 133.70 0.18 113.31 22661.02 4078.98 26740.00

26 400/220kV Rajgarh SS 120001143 995476 18% 10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes Kg 27412.50 194.40 0.18 164.75 4516093.22 812896.78 5328990.00

27 400/220kV Rajgarh SS 120001162 995476 18% 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Kg 300.00 772.40 0.18 654.58 196372.88 35347.12 231720.00

28 400/220kV Rajgarh SS 120001246 995474 18% 11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. Sqm 118.80 1096.55 0.18 929.28 110398.42 19871.72 130270.14

29 400/220kV Rajgarh SS 120001246 995474 18% 11.37A Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Sqm 59.40 1112.70 0.18 942.97 56012.19 10082.19 66094.38

30 400/220kV Rajgarh SS 120001251 995474 18% 11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. Sqm 509.43 1553.45 0.18 1316.48 670661.36 120719.04 791380.40

31 400/220kV Rajgarh SS 120001259 995474 18% 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm. Sqm 27.07 1623.05 0.18 1375.47 37228.37 6701.11 43929.47

32 400/220kV Rajgarh SS 120001351 995453 18% 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter Mtr. 250.00 377.40 0.18 319.83 79957.63 14392.37 94350.00

33 400/220kV Rajgarh SS 120001361 995453 18% 12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5°-110 mm bend Each 28.00 150.35 0.18 127.42 3567.63 642.17 4209.80

34 400/220kV Rajgarh SS 120001363 995453 18% 12.42.6.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.:Shoe (Plain)-110 mm Shoe Each 28.00 131.85 0.18 111.74 3128.64 563.16 3691.80

35 400/220kV Rajgarh SS 120001365 995453 18% 12.43.2 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4coarse sand) and making good the wall etc. complete. 110 mm. Each 200.00 371.30 0.18 314.66 62932.20 11327.80 74260.00

36 400/220kV Rajgarh SS 120001377 995453 18% 12.51.1 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : : Ridges plain (500 - 600mm) Mtr. 150.00 532.35 0.18 451.14 67671.61 12180.89 79852.50

37 400/220kV Rajgarh SS 120001382 995453 18% 12.51.6 Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth) Mtr. 150.00 1313.70 0.18 1113.31 166995.76 30059.24 197055.00

38 400/220kV Rajgarh SS 120001395 995453 18% 12.60 Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded rRockwool conforming to IS:8183,density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building Sqm 627.88 667.05 0.18 565.30 354938.49 63888.93 418827.42

39 400/220kV Rajgarh SS 120001397 995453 18% 12.62 Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held and in position by criss cossing GI wire etc. complete as per directions of Engineerin- Charge. Sqm 527.15 322.50 0.18 273.31 144072.09 25932.98 170005.07

40 400/220kV Rajgarh SS 120001401 995472 18% 13.2.1 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) Sqm 272.49 399.45 0.18 338.52 92240.79 16603.34 108844.13

43 400/220kV Rajgarh SS 120003200 995473 18% 13.48A.1 Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Sqm 272.49 181.25 0.18 153.60 41854.16 7533.75 49387.91

44 400/220kV Rajgarh SS 120001477 995473 18% 13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work. Sqm 600.00 241.75 0.18 204.87 122923.73 22126.27 145050.00

45 400/220kV Rajgarh SS 120001491 995473 18% 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. Sqm 200.00 226.25 0.18 191.74 38347.46 6902.54 45250.00

46 400/220kV Rajgarh SS 120001511 995472 18% 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sqm 535.63 156.05 0.18 132.25 70834.67 12750.24 83584.91

47 400/220kV Rajgarh SS 120001515 995473 18% 13.82.2 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats. Sqm 263.14 137.45 0.18 116.48 30651.82 5517.33 36169.14

48 400/220kV Rajgarh SS 120001590 995419 18% 14.40.2 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.100x70x4 mm (ordinary type) Each 117.00 148.75 0.18 126.06 14748.94 2654.81 17403.75

49 400/220kV Rajgarh SS 120001861 995428 18% 16.86.1 Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of area less than 0.50 sqm. Sqm 50.00 4746.20 0.18 4022.20 201110.17 36199.83 237310.00

50 400/220kV Rajgarh SS 170004889 995461 18% 17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid . Each 7.00 8006.60 0.18 6785.25 47496.78 8549.42 56046.20

51 400/220kV Rajgarh SS 120003122 995478 18% 17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer. Each 11.00 3960.55 0.18 3356.40 36920.38 6645.67 43566.05

52 400/220kV Rajgarh SS 120001900 995478 18% 17.10.1.2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board- 510x1040 mm bowl depth 225 mm. Each 5.00 7514.65 0.18 6368.35 31841.74 5731.51 37573.25

53 400/220kV Rajgarh SS 120003124 995478 18% 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. Each 23.00 1034.80 0.18 876.95 20169.83 3630.57 23800.40

54 400/220kV Rajgarh SS 120003125 995478 18% 17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia Each 16.00 6940.75 0.18 5881.99 94111.86 16940.14 111052.00

55 400/220kV Rajgarh SS 120001941 995478 18% 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 11.00 1607.95 0.18 1362.67 14989.36 2698.09 17687.45

56 400/220kV Rajgarh SS 120001946 995478 18% 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Each 16.00 1083.50 0.18 918.22 14691.53 2644.47 17336.00

57 400/220kV Rajgarh SS 120001947 995478 18% 17.34.1 Providing and fixing toilet paper holder :C.P. brass Each 12.00 803.70 0.18 681.10 8173.22 1471.18 9644.40

58 400/220kV Rajgarh SS 120002049 995478 18% 17.69.2 Providing and fixing PTMT Waste Coupling for wash basin and sink,of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms. Each 23.00 122.40 0.18 103.73 2385.76 429.44 2815.20

59 400/220kV Rajgarh SS 120002052 995478 18% 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Each 25.00 168.35 0.18 142.67 3566.74 642.01 4208.75

60 400/220kV Rajgarh SS 120002053 995478 18% 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. Each 15.00 231.95 0.18 196.57 2948.52 530.73 3479.25

61 400/220kV Rajgarh SS 120002055 995478 18% 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. Each 16.00 708.95 0.18 600.81 9612.88 1730.32 11343.20

62 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

63 400/220kV Rajgarh SS 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work

64 400/220kV Rajgarh SS 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

65 400/220kV Rajgarh SS 18% 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

66 400/220kV Rajgarh SS 120002171 995424 18% 18.21.2.1 Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length, 15 mm nominal bore Each 50.00 97.75 0.18 82.84 4141.95 745.55 4887.50

67 400/220kV Rajgarh SS 120002287 995424 18% 18.49.1 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore Each 30.00 506.80 0.18 429.49 12884.75 2319.25 15204.00

68 400/220kV Rajgarh SS 120002291 995424 18% 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore. Each 50.00 574.30 0.18 486.69 24334.75 4380.25 28715.00

69 400/220kV Rajgarh SS 120002299 995424 18% 18.56.1 Providing and fixing PTMT pillar cock of approved quality and colour. 15mm nominal bore, 107 mm long, weighing not less than 110 gms. Each 11.00 208.45 0.18 176.65 1943.18 349.77 2292.95

70 400/220kV Rajgarh SS 120002323 995424 18% 18.64 Providing and fixing PTMT swivelling shower, 15mm nominal bore, weighing not less than 40 gms. Each 12.00 121.40 0.18 102.88 1234.58 222.22 1456.80

71 400/220kV Rajgarh SS 120002400 995424 18% 18.75.1 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore, weighing not less than 32 gms Each 200.00 53.60 0.18 45.42 9084.75 1635.25 10720.00

72 400/220kV Rajgarh SS 120002638 995424 18% 19.4.1.1 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. Each 35.00 2707.65 0.18 2294.62 80311.65 14456.10 94767.75

73 400/220kV Rajgarh SS 120002799 995476 18% 21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm). Sqm 65.70 1505.25 0.18 1275.64 83809.26 15085.67 98894.93

74 400/220kV Rajgarh SS 120002807 995476 18% 21.8.1 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width. Mtr. 204.00 96.75 0.18 81.99 16726.27 3010.73 19737.00

75 400/220kV Rajgarh SS 120002819 995476 18% 21.13 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. EA 12.00 528.85 0.18 448.18 5378.14 968.06 6346.20

76 400/220kV Rajgarh SS 120003190 995478 18% 26.23.1 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles. Sqm 213.77 2630.40 0.18 2229.15 476534.41 85776.19 562310.60

77 400/220kV Rajgarh SS 170003491 995463 18% 26.41 Designing, providing, installing and fixing factory finished custom designed cold form Light Gauge Steel Framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. The steel sheet shall be galvanized (AZ-150gms Aluminium Zinc Alloy coated steel having minimum yield strength 300-550 Mpa) conforming to AISI specifications and IBC 2009 for cold formed steel framing and construction and also as per IS: 875-1987, ISO 800-1984 and IS:801- 1975. The wind load shall be as per provisions of IS 875 (part -III). LGSFS frame shall be designed as per IS: 801 using commercially available software such as Frame CAD Pro-11.7/STAAD PRO-V8i/ArchitekV2.5.16/ Revit architecture-2011 or equivalent. Proper usage of Connection Accessories like Heavy Duty Tension Ties, Light Duty Hold-ons, Twist Straps (to connect trusswith wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing Sections, L-Shaped Angles for better structural stability. The framing section shall be cold form C-type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple/slot at required locations as per approved drawings. Kg 5780.00 285.90 0.18 242.29 1400425.42 252076.58 1652502.00

78 400/220kV Rajgarh SS 170003491 995463 18% 26.42.1 Providing and fixing of external wall system on Light gauge steel frame work with outer face cement boards as per standard sizes fixed with self- drilling / taping screws / fasteners @ 60cm c/c of approved make. A groove of 2 mm to 3mm shall be maintained and grooves shall be sealed with silicon based sealant. The board shall be fixed in a staggered pattern. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm and. Internal face 12.5 mm thick gypsum plaster board fixed on cement board as per standard sizes fixed with selfdrilling / taping screws / fasteners @ 60cm c/c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately). Outer face: Outer face having 6mm thick fiber cement board fixed on 9mm thick fiber cement board, Type A, as per IS:14862:2000 (high pressure steam cured) Inner Face :- 12.5 mm thick gypsum plaster board conforming to IS 2095:2011 fixed on 8 mm thick fibre cement board confirming to IS:14862:2000 of type B (High pressure steam cured). Sqm 527.15 3580.65 0.18 3034.45 1599602.28 287928.41 1887530.70

79 400/220kV Rajgarh SS 170001713 995453 18% 26.44 Providing and fixing in all exterior face panels breathable vapour barrier underneath the cement fiber board as per National Building Code 2009 complete as per direction of Engineer-in-charge. Sqm 527.15 298.75 0.18 253.18 133462.13 24023.18 157485.32

80 400/220kV Rajgarh SS 170003203 995429 18% 26.86.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 45 x 70 mm Mtr. 117.30 705.85 0.18 598.18 70166.28 12629.93 82796.21

81 400/220kV Rajgarh SS 170003203 995429 18% 26.87.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick Sqm 36.23 4346.70 0.18 3683.64 133440.01 24019.20 157459.21

Total of Schedule Items as per DSR'23 ₹ 18,054,923.21 ₹ 3,249,886.18 ₹ 21,304,809.39

Add percentage (%) above/below +/- on DSR 2023 Rates (to be quoted by contractor) 0.00%

Add Amount above/below +/- on the amount for DSR Items as per quoted percentage ,,,0.00 ,,,0.00

Total of Schedule Items Part IIIA 18,05,49,23.21

Total Tax 3,24,98,86.18

Place: Designation:

पावर ग्रिड कारपोरेशन ऑफ इंडिया लिमिटेड

POWER GRID CORPORATION OF INDIA LTD.

RHQ Vadodara, WRTS-II

BILL OF QUANTITIES FOR Construction of Skill Development Centre (PEB) at 400/220 kV Rajgarh Sub-Station in WR-2

Name of Package: Construction of Skill Development Centre (PEB) at 400/220 kV Rajgarh Sub-Station in WR-2

(SCHEDULE OF RATES AND PRICES)

Bidder’s Name and Address (Sole Bidder) : To:

Name : Contract Services

Address : Power Grid Corporation of India Ltd.,

Western Region Transmission syatem -II

Plot No. 54, Near Riya revati resort ,

Sama - savli road, vadodara-390008

Installation Charges- Schedule Items for Construction of Skill Development Centre (PEB) at 400/220 kV Rajgarh Sub-Station in WR-2

Sl. No. Activity Header / Substation Name Activity Description SAC Whether SAC in column ‘3’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Description Unit Quantity Unit Erection Charges Total Erection Charges Total Tax GST

(Service Accounting Codes)

Non-Scheduled Items-Civil

1 400/220kV Rajgarh SS Non Schedule Item 995413 18% NS-1 Providing & laying of 7mm PVC false ceiling with all fittings & fixing materials complete. Sqm 414.11 0.00 0.00

2 400/220kV Rajgarh SS Non Schedule Item 995478 18% NS-2 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with push flush system Each 6.000 0.00 0.00

3 400/220kV Rajgarh SS Non Schedule Item 995432 18% NS-3 Supplying and fixing approved make UPVC multi inlet floor trap with 100 mm dia outlet and C.P. cover on top etc., complete with cement concrete support around the floor trap. Each 102.00 0.00 0.00

4 400/220kV Rajgarh SS Non Schedule Item 995432 18% NS-4 Supplying, laying, jointing, testing and commissioning approved make UPVC pipes SWR grade B confirming to IS 13592 with rubber ring joints confirming to IS 5382. The quoted rate shall include necessary fittings like Tees, Bends, Offsets etc., including M.S angle with G.I clamps complete. 75 mm dia. Mtr. 140.00 0.00 0.00

5 400/220kV Rajgarh SS Non Schedule Item 995432 18% NS-5 Supplying, laying, jointing, testing and commissioning approved make UPVC pipes SWR grade B confirming to IS 13592 with rubber ring joints confirming to IS 5382. The quoted rate shall include necessary fittings like Tees, Bends, Offsets etc., including M.S angle with G.I clamps complete. 110 mm dia. Mtr. 105.00 0.00 0.00

7 400/220kV Rajgarh SS Non Schedule Item 995432 18% NS-6 Supplying, laying, jointing, testing and commissioning approved make UPVC pipes SWR grade B confirming to IS 13592 with rubber ring joints confirming to IS 5382. The quoted rate shall include necessary fittings like Tees, Bends, Offsets etc., including M.S angle with G.I clamps complete. 160 mm dia. Mtr. 25.00 0.00 0.00

8 400/220kV Rajgarh SS Non Schedule Item 995421 18% NS-7 Providing and fixing precoated steel profile sheets 0.5mm TPT, AL-Zn coating 150gm/sqm in G550 mpa steel grade as per enclosed Technical specification and direction of EIC. Sqm 725.52 0.00 0.00

9 400/220kV Rajgarh SS Non Schedule Item 995421 18% NS-8 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 5.00 0.00 0.00

10 400/220kV Rajgarh SS Non Schedule Item 995432 18% NS-9 Supply and installation of health faucet with 1m SS braided connection pipe of make- Hindware, Cera,Essco Jaquar or equivalent . Each 12.00 0.00 0.00

11 400/220kV Rajgarh SS Non Schedule Item 998323 18% NS-10 Consultancy services for designing and planning of project LS 1.00 0.00 0.00

Total for Non-Schedule Items (Schedule IIIB) ₹ 0.00 ₹ 0.00

-- Printed Name : 0

# In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder. Designation : 0

पावर ग्रिड कारपोरेशन ऑफ इंडिया लिमिटेड

POWER GRID CORPORATION OF INDIA LTD.

RHQ Vadodara, WRTS-II

BILL OF QUANTITIES FOR Construction of Skill Development Centre (PEB) at 400/220 kV Rajgarh Sub-Station in WR-2

Name of Package: Construction of Skill Development Centre (PEB) at 400/220 kV Rajgarh Sub-Station in WR-2

(SCHEDULE OF RATES AND PRICES)

Bidder’s Name and Address (Sole Bidder) : To:

Name : Contract Services

Address : Power Grid Corporation of India Ltd.,

Western Region Transmission syatem -II

Plot No. 54, Near Riya revati resort ,

Supply & Installation Charges- Schedule Electrical Items in Construction of Skill Development Centre (PEB) at 400/220 kV Rajgarh Sub-Station in WR-2

Sl. No. Activity Header / Substation Name Activity Description Service Code Whether SAC in column ‘4’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Description (DSR'22' Items- Electrical Works) Unit Quantity Unit Erection Charges Deduction of GST factor considered in DSR Unit Erection Charges excluding GST Total Erection Charges excl GST Total Tax GST @ 18% Total Erection Charges incl. GST

Schedule Items-Eelctrical as per DSR '22

1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

a 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.8.1 Group A Point 140 993.00 0.1405 870.67 121893.91 21940.90 143834.81

b 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.8.2 Group B Point 80 1160 0.1405 1017.10 81367.82 14646.21 96014.03

c 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.8.3 Group C Point 60 1445.00 0.1405 1266.99 76019.29 13683.47 89702.76

2 0% 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

a 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Mtr. 1200 327.00 0.1405 286.72 344059.62 61930.73 405990.36

b 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Mtr. 1200 369.00 0.1405 323.54 388250.77 69885.14 458135.91

c 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Mtr. 600 428.00 0.1405 375.27 225164.40 40529.59 265693.99

d 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Mtr. 250 589.00 0.1405 516.44 129110.04 23239.81 152349.85

3 0% 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

a 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.24.1 5/6 A switch Each 120 103.00 0.1405 90.31 10837.35 1950.72 12788.08

b 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.24.3 15/16 A switch Each 25 156.00 0.1405 136.78 3419.55 615.52 4035.07

c 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.24.4 3 pin 5/6 A socket outlet Each 120 122.00 0.1405 106.97 12836.48 2310.57 15147.04

d 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.24.5 6 pin 15/16 A socket outlet Each 25 197.00 0.1405 172.73 4318.28 777.29 5095.57

e 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.24.6 Telephone socket outlet Each 6 148.00 0.1405 129.77 778.61 140.15 918.75

f 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.24.7 TV antenna socket outlet Each 4 148.00 0.1405 129.77 519.07 93.43 612.50

4 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Each 36 586.00 0.1405 513.81 18497.15 3329.49 21826.64

5 0% 2.1 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a 400/220kV Rajgarh SS Schedule Electrical Items 998736 18% 2.10.1 single pole Each 48 256.00 0.1405 224.46 10774.22 1939.36 12713.58

b 400/220kV Rajgarh SS Schedule Electrical Items 998736 18% 2.10.3 double pole Each 12 656.00 0.1405 575.19 6902.24 1242.40 8144.64

c 400/220kV Rajgarh SS Schedule Electrical Items 998736 18% 2.10.5 Triple pole and neutral Each 12 1228.00 0.1405 1076.72 12920.65 2325.72 15246.37

6 400/220kV Rajgarh SS Schedule Electrical Items 998736 18% 2.16 Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required. Each 16 1169.00 0.1405 1024.99 16399.82 2951.97 19351.79

7 0% 2.15 Supplying and fixing following rating four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a 400/220kV Rajgarh SS Schedule Electrical Items 998736 18% 2.15.3 63 Amps Each 2 2872.00 0.1405 2518.19 5036.39 906.55 5942.94

b 400/220kV Rajgarh SS Schedule Electrical Items 998736 18% 2.15.2 40 Amps Each 2 3188.00 0.1405 2795.27 5590.53 1006.30 6596.83

8 400/220kV Rajgarh SS Schedule Electrical Items 998736 18% 2.3.3 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator): 12 way , Double door. Each 6 2315.00 0.1405 2029.81 12178.87 2192.20 14371.07

9 400/220kV Rajgarh SS Schedule Electrical Items 998736 18% 2.4.3 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way (4 + 24), Double door. Each 2 5967.00 0.1405 5231.92 10463.83 1883.49 12347.32

10 400/220kV Rajgarh SS Schedule Electrical Items 998736 18% 2.4.1 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door. Each 2 4091.00 0.1405 3587.02 7174.05 1291.33 8465.37

11 400/220kV Rajgarh SS Schedule Electrical Items 998736 18% 2.19 Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. Each 2 2590.00 0.1405 2270.93 4541.87 817.54 5359.40

12 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

400/220kV Rajgarh SS Schedule Electrical Items 995424 18% 1.18.2 2 Pair Mtr. 100 38.00 0.1405 33.32 3331.87 599.74 3931.61

13 400/220kV Rajgarh SS Schedule Electrical Items 995424 18% 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. Mtr. 50 47.00 0.1405 41.21 2060.50 370.89 2431.39

14 0% 1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

a 400/220kV Rajgarh SS Schedule Electrical Items 998713 18% 1.53.1 1 run of cable Mtr. 250 57.00 0.1405 49.98 12494.52 2249.01 14743.53

b 400/220kV Rajgarh SS Schedule Electrical Items 998713 18% 1.53.2 2 run of cable Mtr. 250 96.00 0.1405 84.17 21043.40 3787.81 24831.21

15 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, 20mm dia. Mtr. 700 128.00 0.1405 112.23 78562.03 14141.17 92703.20

16 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 17.1.2 Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. Each 30 1153.00 0.1405 1010.96 30328.80 5459.18 35787.99

17 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 17.1.6 Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. Each 6 557.00 0.1405 488.38 2930.29 527.45 3457.75

18 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 17.1.9.3 Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. 10 Zone Each 1 16287 0.1405 14280.58 14280.58 2570.50 16851.08

19 400/220kV Rajgarh SS Schedule Electrical Items 998736 18% 17.5.2 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. Mtr. 100 173.00 0.1405 151.69 15168.79 2730.38 17899.17

20 400/220kV Rajgarh SS Schedule Electrical Items 0% 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

a 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.27.2 3 Module (100mmX75mm) Each 15 327.00 0.1405 286.72 4300.75 774.13 5074.88

b 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.27.5 8 Module (125mmX125mm) Each 10 454.00 0.1405 398.07 3980.71 716.53 4697.24

c 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.27.6 12 Module (200mmX150mm) Each 5 547.00 0.1405 479.61 2398.07 431.65 2829.72

d 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.27.1 1 or 2 Module (75mmX75mm) Each 24 298.00 0.1405 261.29 6270.93 1128.77 7399.70

e 400/220kV Rajgarh SS Schedule Electrical Items 995461 18% 1.27.4 6 Module (200mmX75mm) Each 12 402.00 0.1405 352.48 4229.72 761.35 4991.07

21 400/220kV Rajgarh SS Schedule Electrical Items 998739 18% 5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. Each 2 6855.00 0.1405 6010.52 12021.04 2163.79 14184.83

22 400/220kV Rajgarh SS Schedule Electrical Items 998739 18% 5.8 Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) Mtr. 60 972.00 0.1405 852.26 51135.47 9204.38 60339.85

Total of Electrical Shedule Items ₹ 1,773,592.28 ₹ 319,246.61 ₹ 2,092,838.90

Add percentage (%) above/below +/- on DSR 2022 Rates (to be quoted by contractor) 0.00%

Add Amount above/below +/- on the amount for DSR Items as per quoted percentage ,,,0.00 ,,,0.00

Total of Schedule Items Part IIIC 1,77,35,92.28

Total Tax ,31,92,46.61

पावर ग्रिड कारपोरेशन ऑफ इंडिया लिमिटेड

POWER GRID CORPORATION OF INDIA LTD.

RHQ Vadodara, WRTS-II

BILL OF QUANTITIES FOR Construction of Skill Development Centre (PEB) at 400/220 kV Rajgarh Sub-Station in WR-2

Name of Package: Construction of Skill Development Centre (PEB) at 400/220 kV Rajgarh Sub-Station in WR-2

Schedule IIId Name of Package: Skill Developmentr Centre at 400/220 kV Rajgarh Sub-Station in WR-2

(SCHEDULE OF RATES AND PRICES)

Bidder’s Name and Address (Sole Bidder) : To:

Name : Contract Services

Address : Power Grid Corporation of India Ltd.,

Western Region Transmission syatem -II

Plot No. 54, Near Riya revati resort ,

Sama - savli road, vadodara-390008

Supply & Installation Charges- Non-Schedule Electrical Items in Construction of Skill Development Centre (PEB) at 400/220 kV Rajgarh Sub-Station in WR-2

Sl. No. Activity Header / Substation Name Activity Description SAC Whether SAC in column ‘3’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Description (Non-Scheduled Items-Electrical) Unit Quantity Unit Erection Charges Total Erection Charges Total Tax GST

(Service Accounting Codes)

Non-Scheduled Items-Electrical

1 18% Supply and laying of foloowing size 1.1 KV grade LT PVC insulated armoured, aluminum conductor cable , making good the damages, end terminations with aluminium crimping sockets/lugs, etc. as required.

a 400/220kV Rajgarh S/S Non Schedule Electrical Item 998739 18% 1.1KV GRADE 3.5CX70 SQMM (PVC) POWER CABLE Mtr. 500.00 0.00 0.00

b 400/220kV Rajgarh S/S Non Schedule Electrical Item 998739 18% 1.1KV GRADE 4CX10 SQMM (PVC) POWER CABLE Mtr. 1000.00 0.00 0.00

c 400/220kV Rajgarh S/S Non Schedule Electrical Item 998739 18% 1.1KV GRADE 3.5CX35 SQMM (PVC) POWER CABLE Mtr. 750.00 0.00 0.00

d 400/220kV Rajgarh S/S Non Schedule Electrical Item 998739 18% 1.1KV GRADE 3CX2.5 SQMM Mtr. 750.00 0.00 0.00

2 400/220kV Rajgarh S/S Non Schedule Electrical Item 995421 18% Supply and installation, testing and commissioning of pre-wired 10W LED tube light having lumens efficiency ≥100Lumen/watt, CRI ≥80, THD≤20, IP rating IP20, Havells LHEXACP7IN1W010 or equivalent complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVCinsulated, copper conductor, single core cable and earthing etc. as required Each 20.00 0.00 0.00

3 400/220kV Rajgarh S/S Non Schedule Electrical Item 998739 18% Supply, Installation, testing and commissioning of 1200 sweep ceiling fan,motor type BLDC, rpm ≥370, Air delivery ≥225 m³/min Havells Efficienca prime BLDC ceiling fan FHCEK5SBRN48 or equivalent including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. Each 42.00 0.00 0.00

4 400/220kV Rajgarh S/S Non Schedule Electrical Item 998739 18% Supply and Installation of 300mm exhaust fan having air delivery ≥ 1850m³/h havells Ventilair DB metal exhaust fan FHVVEMTDBB12 or equivalent in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Each 23.00 0.00 0.00

5 400/220kV Rajgarh S/S Non Schedule Electrical Item 995421 18% Supply and Installation, testing and commissioning of 40W 2X2 LED panel light having Power factor >0.95, THD<10, CRI>80,IP-20 protection, System efficacy ≥85 lumen /watt pre-wired, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. Each 27.00 0.00 0.00

6 400/220kV Rajgarh S/S Non Schedule Electrical Item 995421 18% Supply and Installation, testing and commissioning of 15W recessed mounted circular LED light having Power factor >0.95 CRI>80,IP-20 protection, System efficacy ≥80 lumen /watt pre-wired, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. Each 66.00 0.00 0.00

7 400/220kV Rajgarh S/S Non Schedule Electrical Item 995421 18% Supply and Installation, testing and commissioning of 10W recessed mounted circular LED light having Power factor >0.95 CRI>80,IP-20 protection, System efficacy ≥80 lumen /watt pre-wired, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. Each 20.00 0.00 0.00

8 400/220kV Rajgarh S/S Non Schedule Electrical Item 995421 18% Supply and installation, testing and commissioning of pre-wired 20W LED tube light having lumens efficiency ≥100Lumen/watt, CRI ≥80, THD≤20, IP rating IP20, Havells LHEXAXPNIN1W020 or equivalent complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVCinsulated, copper conductor, single core cable and earthing etc. as required Each 42.00 0.00 0.00

9 Supplying and fixing following rating four pole, (three phase and neutral), 415 volts, MCB C curve in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a 400/220kV Rajgarh S/S Non Schedule Electrical Item 995461 18% 32A Nos 2.00 0.00 0.00

b 400/220kV Rajgarh S/S Non Schedule Electrical Item 995461 18% 63A Nos 2.00 0.00 0.00

10 400/220kV Rajgarh S/S Non Schedule Electrical Item 998736 18% Supply, installation, testing and commissining feeder pillar, supply of LT kiosk outdoor type, IP55 stand/floor/plinth mounted powder coated made out of 16SWG CRCA steel sheet for body and 14SWG CRCA steel sheet for door, sectionalised copper bus bar with bus coupler cum breaker & two incomer,earthing bus bar consisting of following components: Set 1.00 0.00 0.00

Incomer-(2 nos. incomer circuit breaker and 1no. Bus coupler circuit breaker)

400A 4P MCCB 50 KA- 3no.

100A TPN MCCB-13no.

Voltmeter 0-500V Analog with selector switch, phase indicating LED lamp,Ameter with CT, HRC backup fuse etc complete.- 2 set

11 400/220kV Rajgarh S/S Non Schedule Electrical Item 998736 18% Supply, installing, testing and commissining meter DB, supply of LT kiosk indoor type, stand/floor/plinth mounted powder coated made out of 16SWG CRCA steel sheet for body and 14 SWG CRCA steel sheet for door, 100A copper busbar consisting of following components. Set 1.00 0.00 0.00

100A TPN MCCB 50kA- 3no.

40A DP MCB- 8 No.

Voltmeter 0-500V Analog with selector switch, phase indicating LED lamp,Ameter with CT, HRC backup fuse etc complete.- 3 set

Single phase energy meter-8no.

12 400/220kV Rajgarh S/S Non Schedule Electrical Item 998731 18% Supply and installation of Wall Mounted fan 450mm sweep, Air delivery ≥110 m³/min Havells FHWV3TFSLB18 or equivalent. Each 22.00 0.00 0.00

13 400/220kV Rajgarh S/S Non Schedule Electrical Item 995461 18% Supply and installation of 4.5 kg CO2 type Portable Fire extinguisher. Each 6.00 0.00 0.00

14 400/220kV Rajgarh S/S Non Schedule Electrical Item 995461 18% Supply and installationPORTABLE FIRE EXTINGUISHER-DCP TYPE 4.5/5 KG Each 6.00 0.00 0.00

15 400/220kV Rajgarh S/S Non Schedule Electrical Item 995421 18% Supply and fixing of first aid box. Each 4.00 0.00 0.00

Supply, Installation, Testing and commissioning of CCTV Camera

16 400/220kV Rajgarh S/S Non Schedule Electrical Item 998523 18% POE Switch-10100-MBPS-8-PORTor equivalent Each 3.00 0.00 0.00

17 400/220kV Rajgarh S/S Non Schedule Electrical Item 998523 18% POE Switch-10100-MBPS-16-PORTor equivalent Each 2.00 0.00 0.00

18 400/220kV Rajgarh S/S Non Schedule Electrical Item 998523 18% NVR 32 Channel-HIK-Vision or equivalent Each 1.00 0.00 0.00

19 400/220kV Rajgarh S/S Non Schedule Electrical Item 998523 18% Bullet Camra-HIKVISION-2MP-IP(OUTDOOR)or equivalent Each 5.00 0.00 0.00

20 400/220kV Rajgarh S/S Non Schedule Electrical Item 998523 18% Doom Camra-HIKVISION-2MP-IP(INDOOR)or equivalent Each 8.00 0.00 0.00

21 400/220kV Rajgarh S/S Non Schedule Electrical Item 998523 18% 6U-RACK-DLINKor equivalent Each 1.00 0.00 0.00

22 400/220kV Rajgarh S/S Non Schedule Electrical Item 998523 18% 2U-RACK-DLINKor equivalent Each 4.00 0.00 0.00

23 400/220kV Rajgarh S/S Non Schedule Electrical Item 998523 18% HHD-6TB-SEGATE or equivalent Each 1.00 0.00 0.00

24 400/220kV Rajgarh S/S Non Schedule Electrical Item 998523 18% DLINK Wire-305M or equivalent Each 5.00 0.00 0.00

25 400/220kV Rajgarh S/S Non Schedule Electrical Item 998523 18% PT-Z Camra(Rooftop) or equivalent Each 1.00 0.00 0.00

26 400/220kV Rajgarh S/S Non Schedule Electrical Item 998523 18% Supplying of wires & medium class PVC pipes and laying of wires in medium class PVC pipes. Mtr. 300.00 0.00 0.00

27 400/220kV Rajgarh S/S Non Schedule Electrical Item 998523 18% Installation and commissioning of above supplied CCTV & system LS 1.00 0.00 0.00

Supply and installation of Geyser all complete

28 400/220kV Rajgarh S/S Non Schedule Electrical Item 995461 18% Geyser of 10Ltrs. Of BAJAJ,HAVELLS,CROMPTON or equivalent make. Each 12.00 0.00 0.00

29 400/220kV Rajgarh S/S Non Schedule Electrical Item 998739 18% Supply and installation of Double door fridge of size- 48"x24"x72" 202 grade steel of Jonree, Whirlpool, LG,Samsung or equivalent make. Each 1.00 0.00 0.00

30 400/220kV Rajgarh S/S Non Schedule Electrical Item 998739 18% Supply and installation of deep freezer of size- 48"x24"x34" under counter 202 grade steel customised of Jonree, Whirlpool, LG,Samsung or equivalent make. Each 1.00 0.00 0.00

31 Supply and installation of Television

32 400/220kV Rajgarh S/S Non Schedule Electrical Item 998731 18% Supply and Installation of Smart HD TV-50" 4K UHD TV, Crystal Display, HDR, 20W Sound,Q Symphony, 3 side Bazel less design, Motion Xceletor, Universal Guide, TV Plus, Tap view, Smart Broser, PC on TV, Music system with Two years warranty of make-SONY,LG,SAMSUNG or equivalent. Each 1.00 0.00 0.00

Supply and installation of split AC all complete:

33 400/220kV Rajgarh S/S Non Schedule Electrical Item 995463 18% 1.5 TR 3 star/TS inverter Split Air-conditioner with R32 Refrigerant of make-Hitachi, Daikin,Voltas, Carrier,Blue star or equivalent Each 16.00 0.00 0.00

34 400/220kV Rajgarh S/S Non Schedule Electrical Item 995461 18% WUXGA 8,000 (1920 * 1200 pixels), High brightness 3 LCD laser projector offer stunning image quality, 85% corner to corner zone ratio, 2,304,000 (1920* 1200) pixels * 3,20,000 hours (NORMAL/QUIET)/24,000 hours (ECO) HDMI IN-HDMI 19-pin * 3 (Compatible with HDCP 2.3, Deep colour, 4K/60p*5 signal input) , CEC supported, operating temperature: 0-45⁰C (32-113⁰F)*10 Approved make -SONY/PANASONIC/CHRISTIE NO 1.00 0.00 0.00

35 400/220kV Rajgarh S/S Non Schedule Electrical Item 995461 18% Heavy Duty Ceiling Mount Kit NO 1.00 0.00 0.00

36 400/220kV Rajgarh S/S Non Schedule Electrical Item 995461 18% 180 inch Fiber glass ME Tubular Screen with RF remote & LVC, Aspect Ratio - 16:10 NO 1.00 0.00 0.00

37 400/220kV Rajgarh S/S Non Schedule Electrical Item 995461 18% Trolley for above display NO 1.00 0.00 0.00

38 400/220kV Rajgarh S/S Non Schedule Electrical Item 995461 18% 2- way Loudspeaker system with 1 * 12" LF, Frequency response (+-3 dB): 43 Hz - 18 Hz, Frequency Range ( -10dB):37 Hz- 20kHz, Coverage Pattern : 120⁰ * 60⁰ , Crossover modes : Bi-amp/ Passive switchable, Passive Crossover frequency: 1.5kHz, Passive mode power: NO 300W (1200W peak), SPL : 127dB peak, System sensitivity ( 1 W @ 1m ) : 96dB SPL, nominal impedance: 8ohms, input connector : NL4 Neutrik Speakon, barrier strip terminals, approved make - JBL/BOSE/B&W NO 1.00 0.00 0.00

39 400/220kV Rajgarh S/S Non Schedule Electrical Item 995461 18% Wireless handheld microphone system, wireless microphone system with MHZ career frequency band up to 16 pre programs frequencies with the same frequency band, Audio bandwidth 35-20,000 Hz, THD at 1 kHz :< 0.3% ( Receiver), Signal -to-noise : 120 dB (A) ( Receiver),wideband FM modulkation,upto 48 simultaneous channels, upto 14 hours operation with one single A A battery or better , Pilot tone,transmission to know the transmitter battery status, receiver should have microphone and line level output, transmitter should have display to show the battery and LED to show the muted/unmuted status, sensitivity 6.3 dB V/-100 dBm,should have microprocessor -controlled diversity,T.H.D,:0.7%(transmitter),infrared programmable ,RF output power:10 or 50 mW. NO 1.00 0.00 0.00

40 400/220kV Rajgarh S/S Non Schedule Electrical Item 995461 18% 8 port Gigabit Poe Unmanaged Switch Approved make - CISCO/Netgrear/Airpro NO 1.00 0.00 0.00

41 400/220kV Rajgarh S/S Non Schedule Electrical Item 995461 18% Supply and installation of Bollard for park lighting Model no.MAMBOOBLS8WLED830PSYMTOPC(0.6M) Make Havells or equivalent. Each 12.00 0.00 0.00

Total for Non-Schedule Items (Schedule IIId) ₹ 0.00 ₹ 0.00

# In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.

पावर ग्रिड कारपोरेशन ऑफ इंडिया लिमिटेड

POWER GRID CORPORATION OF INDIA LTD.

RHQ Vadodara, WRTS-II

BILL OF QUANTITIES FOR Misc works related to Skill Development Centre at 400/220 kV Rajgarh SS.

Name of Package: Misc works related to Skill Development Centre at 400/220 kV Rajgarh SS.

(SCHEDULE OF RATES AND PRICES)

Bidder’s Name and Address (Sole Bidder) : To:

Name : Contract Services

Address : Power Grid Corporation of India Ltd.,

Western Region Transmission syatem -II

Plot No. 54, Near Riya revati resort ,

Sama - savli road, vadodara-390008

Installation Charges- Schedule Items for Misc works related to Skill Development Centre at 400/220 kV Rajgarh SS.

Sl. No. Activity Header / Substation Name Service Code SAC Whether SAC in column ‘4’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Description (DSR'23 Items- Civil Works) Unit Quantity Unit Erection Charges Deduction of GST factor considered in DSR Unit Erection Charges excluding GST Total Erection Charges excl GST Total Tax GST @ 18% Total Erection Charges incl. GST

(Service Accounting Codes)

Schedule Items-Civil as per DSR 2023

1 2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.

2 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

3 400/220kV Rajgarh SS 120000391 995433 18% 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum. 178.13 196.00 0.18 166.10 29588.46 5325.92 34914.39

4 400/220kV Rajgarh SS 120000391 995433 18% 2.25 a) Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. Cum. 294.00 700.50 0.18 593.64 174531.36 31415.64 205947.00

5 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials.

6 400/220kV Rajgarh SS 120000394 995433 18% 2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. Cum. 64.80 2123.75 0.18 1799.79 116626.27 20992.73 137619.00

7 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

i) 400/220kV Rajgarh SS 120000437 995454 18% 4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). Cum. 21.14 7878.50 0.18 6676.69 141141.99 25405.56 166547.55

ii) 400/220kV Rajgarh SS 120000442 995454 18% 4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) Cum. 30.63 6812.00 0.18 5772.88 176807.12 31825.28 208632.40

8 4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:

400/220kV Rajgarh SS 120000450 995454 18% 4.2.3 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) Cum. 3.80 9895.20 0.18 8385.76 31823.97 5728.31 37552.28

9 4.3 Centering and shuttering including strutting, propping etc. and removal of form work for :

i) 400/220kV Rajgarh SS 120000456 995457 18% 4.3.1 Foundations, footings, bases for columns Sqm. 103.25 392.15 0.18 332.33 34313.96 6176.51 40490.47

ii) 400/220kV Rajgarh SS 120000458 995457 18% 4.3.3 Columns, piers, abutments, pillars, posts and struts Sqm. 183.22 962.30 0.18 815.51 149417.46 26895.14 176312.61

10 5.1 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

400/220kV Rajgarh SS 120000488 995454 18% 5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Cum. 15.38 9045.75 0.18 7665.89 117895.41 21221.17 139116.58

11 5.9 Centering and shuttering including strutting, propping etc. and removal of form for-

i) 400/220kV Rajgarh SS 120000499 995457 18% 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm. 13.98 392.15 0.18 332.33 4645.98 836.28 5482.26

ii) 400/220kV Rajgarh SS 120000500 995457 18% 5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Sqm. 11.95 842.50 0.18 713.98 8530.67 1535.52 10066.19

iii) 400/220kV Rajgarh SS 120000501 995457 18% 5.9.3 Suspended floors, roofs, landings, balconies and access platform Sqm. 19.01 927.25 0.18 785.81 14936.58 2688.58 17625.17

iv) 400/220kV Rajgarh SS 120000503 995457 18% 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm. 10.64 736.40 0.18 624.07 6640.08 1195.21 7835.30

v) 400/220kV Rajgarh SS 120000504 995457 18% 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm. 6.00 962.30 0.18 815.51 4893.05 880.75 5773.80

12 5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level /above plinth level.

400/220kV Rajgarh SS 120000543 995454 18% 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 1230.34 107.85 0.18 91.40 112450.77 20241.14 132691.91

13 6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

14 400/220kV Rajgarh SS 120001115 995476 18% 10.1 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Kg 4000.00 117.35 0.18 99.45 397796.61 71603.39 469400.00

15 10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required

400/220kV Rajgarh SS 120001153 995476 18% 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kg 622.29 172.60 0.18 146.27 91022.57 16384.06 107406.63

16 11.20 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).

400/220kV Rajgarh SS 120001218 995474 18% 11.20.3 Dark shade pigment using ordinary cement Sqm. 328.95 1119.50 0.18 948.73 312084.34 56175.18 368259.53

17 13.7 12 mm cement plaster finished with a floating coat of neat cement of mix :

18 13.44 Finishing walls with water proofing cement paint of required shade :

400/220kV Rajgarh SS 120001464 995473 18% 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm) over Brick wall of fencing. Sqm. 194.22 119.90 0.18 101.61 19734.73 3552.25 23286.98

19 13.62 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

400/220kV Rajgarh SS 120001491 995473 18% 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordanary paint of approved brand and manufacture. Sqm. 262.56 226.25 0.18 191.74 50343.02 9061.74 59404.77

20 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

400/220kV Rajgarh SS 120001642 995429 18% 15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) Cum. 10.00 1503.60 0.18 1274.24 12742.37 2293.63 15036.00

21 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

22 400/220kV Rajgarh SS 120001732 995428 18% 16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. Sqm. 560.00 218.90 0.18 185.51 103884.75 18699.25 122584.00

23 400/220kV Rajgarh SS 120001801 995421 18% 16.42 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. Cum. 84.00 7993.80 0.18 6774.41 569050.17 102429.03 671479.20

24 400/220kV Rajgarh SS 100004492 995421 18% 16.45 Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) per cm depth per cm width per meter length 2497.50 5.30 0.18 4.49 11217.58 2019.17 13236.75

25 16.46 Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge.

400/220kV Rajgarh SS 100004494 995458 18% 16.46.1 Using grade 'A' sealing compound conforming to IS: 1834. per cm depth per cm width per meter length 832.50 8.65 0.18 7.33 6102.65 1098.48 7201.13

26 400/220kV Rajgarh SS 120001839 995421 18% 16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). Cum. 2.50 10117.60 0.18 8574.24 21435.59 3858.41 25294.00

27 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work

28 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

29 400/220kV Rajgarh SS 120002286 995424 18% 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Per Litre 10000.00 11.00 0.18 9.32 93220.34 16779.66 110000.00

30 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

400/220kV Rajgarh SS 120002665 995424 18% 19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. Each 5.00 12770.55 0.18 10822.50 54112.50 9740.25 63852.75

31 19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design

400/220kV Rajgarh SS 120002731 995424 18% 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 2.00 26861.90 0.18 22764.32 45528.64 8195.16 53723.80

Total of Schedule Items as per DSR'23 ₹ 3,713,322.74 ₹ 668,398.09 ₹ 4,381,720.84

Add percentage (%) above/below +/- on DSR 2023 Rates (to be quoted by contractor) 0.00%

Add Amount above/below +/- on the amount for DSR Items as per quoted percentage ,,,0.00 ,,,0.00

Total of Schedule Items Part IIIE 3,71,33,22.74

Total Tax ,66,83,98.09

Place: Designation:

पावर ग्रिड कारपोरेशन ऑफ इंडिया लिमिटेड

POWER GRID CORPORATION OF INDIA LTD.

RHQ Vadodara, WRTS-II

BILL OF QUANTITIES FOR Misc works related to Skill Development Centre at 400/220 kV Rajgarh SS.

Name of Package: Misc works related to Skill Development Centre at 400/220 kV Rajgarh SS.

(SCHEDULE OF RATES AND PRICES)

Bidder’s Name and Address (Sole Bidder) : To:

Name : Contract Services

Address : Power Grid Corporation of India Ltd.,

Western Region Transmission syatem -II

Plot No. 54, Near Riya revati resort ,

Sama - savli road, vadodara-390008

Installation Charges: Misc works related to Skill Development Centre at 400/220 kV Rajgarh SS.

Sl. No. Activity Header / Substation Name Activity Description SAC Whether SAC in column ‘3’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Description Unit Quantity Unit Erection Charges Total Erection Charges Total Tax GST

(Service Accounting Codes)

Non-Scheduled Items-Civil

1 400/220kV Rajgarh SS Non Schedule Item 995461 18% NS-1Chain Link Fencing as per POWERGRID Technical Specifications & Standard Drawing

Providing and fixing G.I. chain link fabric fencing made of G.I. wire of 3.15 mm dia and 75 mm mesh size conforming to IS: 2721 of required width including MS tube of required size of grade YST210 and conform to IS: 1161, strengthening with 50 x 6 mm thk MS flat, nuts, bolts and washers as required complete as per drawing. The whole assembly of tubular post and frame of panels shall be hot dip galvanized. The zinc coating shall be minimum 610 gram per square meter. The purity of zinc shall be 99.95% as per IS: 209. Meter 270.000 0.00 0.00

2 400/220kV Rajgarh SS Non Schedule Item 995421 18% NS-2 Providing, laying, spreading and compacting stone aggregate of specified sizes to WBM specifications (as per CPWD specifications) in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . Cum. 154.00 0.00 0.00

3 400/220kV Rajgarh SS Non Schedule Item 995432 18% NS-3 Providing & Laying of SW pipes for external sewerage system as per technical specification 100mm dia pipe. Meter 25.00 0.00 0.00

4 400/220kV Rajgarh SS Non Schedule Item 995432 18% NS-4 Providing & Laying of SW pipes for external sewerage system as per technical specification 150mm dia pipe. Meter 25.00 0.00 0.00

Total for Non-Schedule Items (Schedule IIIF) ₹ 0.00 ₹ 0.00

-- Printed Name : 0

# In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder. Designation : 0

पावर ग्रिड कारपोरेशन ऑफ इंडिया लिमिटेड

POWER GRID CORPORATION OF INDIA LTD.

RHQ Vadodara, WRTS-II

BILL OF QUANTITIES FOR Supply & Installation of furniture items for Skill Development Centre at 400/220 kV Rajgarh SS.

Name of Package: Supply & Installation of furniture items for Skill Development Centre at 400/220 kV Rajgarh SS.

(SCHEDULE OF RATES AND PRICES)

Bidder’s Name and Address (Sole Bidder) : To:

Name : Contract Services

Address : Power Grid Corporation of India Ltd.,

Western Region Transmission syatem -II

Plot No. 54, Near Riya revati resort ,

Sama - savli road, vadodara-390008

Installation Charges: Supply & Installation of furniture items for Skill Development Centre at 400/220 kV Rajgarh SS.

Sl. No. Activity Header / Substation Name Activity Description SAC Whether SAC in column ‘3’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Description Unit Quantity Unit Erection Charges Total Erection Charges Total Tax GST

(Service Accounting Codes)

Office Furniture

1 400/220kV Rajgarh SS Non Schedule Item 995476 18% Table -1500 Each 2 0.00 0.00

2 400/220kV Rajgarh SS Non Schedule Item 995476 18% High Back Chair Each 1 0.00 0.00

3 400/220kV Rajgarh SS Non Schedule Item 995476 18% Visitor Chair Each 6 0.00 0.00

4 400/220kV Rajgarh SS Non Schedule Item 995476 18% Bravo Mid Back Each 2 0.00 0.00

5 400/220kV Rajgarh SS Non Schedule Item Kitchen Cum Dining Hall with Store

6 400/220kV Rajgarh SS Non Schedule Item 995476 18% Dinning Table 6 seater Each 10 0.00 0.00

7 400/220kV Rajgarh SS Non Schedule Item 995476 18% Dinning Chair Each 60 0.00 0.00

8 400/220kV Rajgarh SS Non Schedule Item 995476 18% Desklet Chair with cushion Each 50 0.00 0.00

9 400/220kV Rajgarh SS Non Schedule Item 995476 18% Classroom Table for Instructor Each 1 0.00 0.00

10 400/220kV Rajgarh SS Non Schedule Item 995476 18% Visitor Chair Each 1 0.00 0.00

Trainee Accommodation Dormatry

11 400/220kV Rajgarh SS Non Schedule Item 995476 18% Single Bed Each 50 0.00 0.00

12 400/220kV Rajgarh SS Non Schedule Item 995476 18% Mattress 78x36x4 Each 50 0.00 0.00

13 400/220kV Rajgarh SS Non Schedule Item 995476 18% Storage trunk Box Each 50 0.00 0.00

14 400/220kV Rajgarh SS Non Schedule Item 995476 18% Pillow Nixy Each 50 0.00 0.00

House Keeping Staff

15 400/220kV Rajgarh SS Non Schedule Item 995476 18% Single Bed Each 12 0.00 0.00

16 400/220kV Rajgarh SS Non Schedule Item 995476 18% Mattress 78x36x4 Each 12 0.00 0.00

17 400/220kV Rajgarh SS Non Schedule Item 995476 18% Pillow Nixy Each 12 0.00 0.00

18 400/220kV Rajgarh SS Non Schedule Item 995476 18% Storwel with Locker & Mirror Each 3 0.00 0.00

19 400/220kV Rajgarh SS Non Schedule Item 995421 18% RO Each 2 0.00 0.00

20 400/220kV Rajgarh SS Non Schedule Item 995421 18% Water Cooler Each 2 0.00 0.00

21 400/220kV Rajgarh SS Non Schedule Item 995476 18% Air Cooler Each 8 0.00 0.00

22 400/220kV Rajgarh SS Non Schedule Item 995463 18% AC Each 1 0.00 0.00

23 400/220kV Rajgarh SS Non Schedule Item 995476 18% Bed Sheet Each 1000 0.00 0.00

24 400/220kV Rajgarh SS Non Schedule Item 995476 18% Blanket Each 500 0.00 0.00

25 400/220kV Rajgarh SS Non Schedule Item 995476 18% Pillow Cover Each 1000 0.00 0.00

26 400/220kV Rajgarh SS Non Schedule Item 995476 18% Towel Each 1000 0.00 0.00

-- Printed Name : 0

# In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder. Designation : 0

Construction of Skill Development Centre at 400/220 kV Rajgarh Sub-Station in WR-2

(SUMMARY OF TAXES & DUTIES)

Bidder’s Name and Address (Sole Bidder) : To:

Name : Contract Services

Address : Power Grid Corporation of India Ltd.,

Western Region Transmission syatem -II

Plot No. 54, Near Riya revati resort ,

Sama - savli road, vadodara-390008

Sl. No. Item Nos. Total Price (INR)

1 TOTAL GST on Services

a. Total GST on Supply & Installation Services (indentified in Schedule-3a) which are not included in the Installationas per the provision of the Bidding Documents, as applicable 3249886.18

b. Total GST on Supply & Installation Services (indentified in Schedule-3b) which are not included in the Installationas per the provision of the Bidding Documents, as applicable 0.00

c. Total GST on Supply & Installation Services (indentified in Schedule-3c) which are not included in the Installationas per the provision of the Bidding Documents, as applicable 319246.61

d. Total GST on Supply & Installation Services (indentified in Schedule-3d) which are not included in the Installationas per the provision of the Bidding Documents, as applicable 0.00

e. Total GST on Supply & Installation Services (indentified in Schedule-3e) which are not included in the Installationas per the provision of the Bidding Documents, as applicable 668398.09

f. Total GST on Supply & Installation Services (indentified in Schedule-3f) which are not included in the Installationas per the provision of the Bidding Documents, as applicable 0.00

g. Total GST on Supply and Installation: [a+b+c+d+e+f] 4237530.88

i. Total GST on Supply & Installation Services (indentified in Schedule-3g) which are not included in the Installationas per the provision of the Bidding Documents, as applicable 0.00

2 GRAND TOTAL [g+i] ₹ 4,237,530.88

Name of Package: Construction of Skill Development Centre at 400/220 kV Rajgarh Sub-Station in WR-2

(GRAND SUMMARY)

Bidder’s Name and Address (Sole Bidder) : To:

Name : Contract Services

Address : Power Grid Corporation of India Ltd.,

Western Region Transmission syatem -II

Plot No. 54, Near Riya revati resort ,

Sama - savli road, vadodara-390008

Sl. No. Description Total Price (INR)

1 TOTAL SCHEDULE NO. 3a

Supply & Installation Charges- Schedule Civil Items in Construction of Skill Development Centre (PEB) at 400/220 kV Rajgarh Sub-Station in WR-2 ₹ 18,054,923.21

2 TOTAL SCHEDULE NO. 3b

Supply & Installation Charges- Non-Schedule Civil Items in Construction of Skill Development Centre (PEB) at 400/220 kV Rajgarh Sub-Station in WR-2 ₹ 0.00

3 TOTAL SCHEDULE NO. 3c

Supply & Installation Charges- Schedule Electrical Items in Construction of Skill Development Centre (PEB) at 400/220 kV Rajgarh Sub-Station in WR-2 ₹ 1,773,592.28

4 TOTAL SCHEDULE NO. 3d

Supply & Installation Charges- Non-Schedule Electrical Items in Construction of Skill Development Centre (PEB) at 400/220 kV Rajgarh Sub-Station in WR-2 ₹ 0.00

5 TOTAL SCHEDULE NO. 3e

Supply & Installation Charges- Schedule Civil Items in Misc. Civil works related Skill Development Centre at 400/220 kV Rajgarh Sub-Station in WR-2 ₹ 3,713,322.74

6 TOTAL SCHEDULE NO. 3f

Supply & Installation Charges- Non-Schedule Civil Items in Misc. Civil works related Skill Development Centre at 400/220 kV Rajgarh Sub-Station in WR-2 ₹ 0.00

A A: Total of Service/Installation Charge (ITEMS TAB: Item 02 for BID PRICE SUMMARY Statement ) ₹ 23,541,838.24

7 TOTAL SCHEDULE NO. 3g

B Supply & Installation Charges- Furnitures items for Skill Development Centre at 400/220 kV Rajgarh Sub-Station in WR-2 B: Total of Supply (ITEMS TAB: Item 01 for BID PRICE SUMMARY Statement ) ₹ 0.00

C C: Total of GST On Goods/Supply (ITEMS TAB: Item 03 for BID PRICE SUMMARY Statement ) ₹ 0.00

D D: Total of GST On Supply and Installation (ITEMS TAB: Item 04 for BID PRICE SUMMARY Statement ) ₹ 4,237,530.88

GRAND TOTAL [A+B+C+D] ₹ 27,779,369.12

Date : 0 Printed Name : 0

Place : 0 Designation : 0

पावरग्रिड कॉर्पोरेशन ऑफ इण्डिया लि. / POWER GRID CORPORATION OF INDIA LTD.

पश्चिम क्षेत्र संचरण प्रणालि.-II/ WESTERN REGION TRANSMISSION SYSTEM- II

Cost stimate for Construction of Steel Framed GIS Store Shed at POWERGID Itarsi SS

Sr. No. DSR'16 It. No. Description of Item Unit Nos L B H Total

1 1.1 Carriage of materials by mechanical transport including loading, unloading and stacking

1.1.2 EARTH upto 1.00 km. Cum

Total Excavation 483.017075

Deduct Total filling -402.292075

2 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.

2.6.1 All kinds of soil cu.m

For WBM inside the Hall 2 3.345 4.1 0.275 7.542975

Total 386.742975

3 2.8 Earth work in excavtion by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 mtr. In width or 10 sqm on plan) including dressing of sides and ramming of bottoms lift up to 1.5 mtr. Including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 mtr.

2.8.1 All kind of soil cu.m

Drain all around 1 100.852 1 0.6 60.5112 0.91

4 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides, of the foundation etc. in layers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering, lead upto 50 mtrs and lift upto 1.5 mtrs. Cu.m.

Total Excavation 483.017075

Deduct PCC -20.75556

Deduct RCC below GL -55.47226

Deduct Sand Filling -32.9331

Deduct WBM -106.689563

Decut for ramp brickwork, pcc & wbm -4.49718

Total 402.292075

5 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked materials.

2.26.1 All kinds of Soil Cu.m.

6 2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

For Fillling inside the Hall 1 30.2 14.54 0.075 32.9331

7 2.34 Supplying chemical emulsion in sealed containers including delivery as specified

2.34.1 Chloropyriphos/Lindane emulsifiable concentrate of 20% Litre

For Closed Store 30.606 15 @ 0.67 307.5903

8 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering : All works upto plinth level.

(a) 4.1.6 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size).

For Fillling inside the Hall 1 30.2 14.54 0.1 43.9108

Total 45.576835

(b) 4.1.8 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Cu.m.

Below brickwork of ramp 1 11.56 0.445 0.15 0.77163

9 4.3 Centering and shuttering including strutting, propping etc. and removalof form work for :

4.3.1 Foundations, footings, bases for columns Sqm

Drain all around 2 100.84 0.075 30.252

10 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. sqm

Periphery of Building long side 2 32.66 1 65.32

Periphery of Building short side 2 15 1 30

side of ramp 2 3.92 1 7.84

Total 103.16 ok

11 5.9 Centring and shuttering including strutting propping etc. and removal of form for :

(a) 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. Sq.m.

(b) 5.9.5 Lintels, beams, plinth beams, girders, bressumers & cantilevers Sq.m.

Windows W 15 2.46 0.5 36.9

(c ) 5.9.6 Columns, pillars, piers abutments posts & struts Sq.m.

(d ) 5.9.15 Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like Sq.m.

(e ) 5.9.19 Weather shade, chajjas, corbels etc. including edges. Sq.m.

For Windows W 15 2.46 0.75 27.675

For Doors D 2 1.46 0.75 2.19

12 5.22 Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in postion and binding all complete up to plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg.

F1 footing (2000x2200)

F2 footing (1800x1950)

Sub Total A 1087.544256

Sub Total B 2023.02652

for 2 lap in 31m length 10# 2 4 0.5 0.617 2.468 ok

Top Extra 3-16# at three location 16# 2 9 2.8 1.58 79.632

Top 4-12# at two column location 12# 2 8 2.8 0.888 39.7824

joint of column and beam 22 no

Sub Total C 1046.780276

Sub total D 1160.7233

100 mm thik band all around below plinth lvl

13 5.22A Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in postion and binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg.

Lintel Window W 16# 15 5 2.66 1.58 315.21

14 5.28 Providing and fixing in position 12mm thick bitumen impregnated fiber board conforming to IS: 1838, including cost of primer , sealing compound Grade-A in expansion joints. per cm depth per 100 m

In both directions 4 30 15 0.01 18

15 5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Mtr.

Chajjas Window 15 3.96 59.4

Chajjas Door 2 2.96 5.92

16 5.33 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).

(a) 5.33.1 All works upto plinth level cum

100 mm thik band below plinth all around 1 90.22 0.23 0.1 2.07506

(b) 5.33.2 All works above plinth level upto floor V level cum

coping trapezoidal portion 1 91.2 0.115 0.0875 0.9177

Total 18.457725

17 5.35 Add for using extra cement in the items of design mix over and above the specified cement content therein.

Total Quantity of RCC @50 kg per Cum 73.929985 @ 0.5 36.9649925

18 6.32 Brick work with clay flyash F.P .S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in :

6.32.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum

Above Plinth Level Cum 1 90 0.23 3 62.1

Rolling Shutter Cum -1 4 0.23 6 -5.52

19 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry . Sq.m.

20 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

9.48.2 Fixed to openings/wooden frames with rawl plugs & screws etc. Kg

Total 611.040075

21 9.96 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.

9.96.1 300 x 16 mm Each

22 9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Windows 15 1 15

23 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

9.100.1 125 mm Each

24 9.101 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour & shade with necessary screws etc. complete

9.101.2 Twin rubber stopper Each

34 12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

12.21.1 In 75x75 mm deep chase mettre

36 13.4 12 mm cement plaster of mix :

13.4.2 1:6 (1 cement : 6 coarse sand). Sq.m.

37 13.5 15 mm cement plaster on rough side of single or half brick masonry wall of mix :

13.5.2 1:6 ( 1 cement : 6 coarse sand) Sqm.

On the inside of walls 1 89.36 3 268.08

Rolling Shutter -1 4 6 -24

38 13.9 Cement plaster 1:3 ( 1cement : 3 coarse sand) finished with a floating coat of neat cement :

13.9.1 12 mm cement plaster Sqm.

39 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 Cement : 5 Coarse sand) finished with top layer 6 mm thick cement plaster 1:6 (1 Cement : 6 Fine sand) Sq.m.

On the outside of wall 1 91.32 3.6 328.752

Rolling Shutter -1 4 6 -24

Total 253.252 add plaster jamb, sill and soffit

40 13.16 6 mm cement plaster of mix :

13.16.1 1:3 (1 cement : 3 fine sand) Sq.m.

For the underside of Chajjas W and LS 15 2.46 0.75 27.675

For the underside of Chajjas D and LS 2 1.46 0.75 2.19

plaster for coping is to be included or not

41 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. Sqm

On the inside of walls 1 89.36 3 268.08

Rolling Shutter -1 4 6 -24

42 13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:

13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Sq.m.

On the outside of wall 1 91.32 3.6 328.752

Rolling Shutter -1 4 6 -24

43 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sq.m.

On the outside of wall 1 91.32 3.6 328.752

Rolling Shutter -1 4 6 -24

44 13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

13.83.2 Two coats Sq.m.

On the inside of walls 1 89.36 3 268.08

Rolling Shutter -1 4 6 -24

16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

For inside of the Hall 1 30.14 14.54 438.2356

46 16.75+16.79 Providing and laying C.C. pavement of mix M-20 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately). (Note:-Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). Cum

For inside of the Hall 1 30.14 14.54 0.15 65.73534

47 16.91 Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator , filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per anufacturer's specifications & direction of Engineerin-Charge.

16.91.1 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern. Sq.m.

48 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

21.1.1 For fixed portion

21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Kg

Top Rail Jindal 21149 15 1 2 1.539 46.17

Bottom Rail Jindal 21148 15 1 2 1.842 55.26

Side Bars Jindal 21149 15 2 1.65 1.539 76.1805

Top Rail Jindal 20011 2 1 1 2.541 5.082

Side Bars Jindal 20011 2 2 2 2.541 20.328

21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Kg

Top rail Jindal 20506 15 1 2 0.717 21.51

Bottom rail Jindal 20506 15 1 2 0.717 21.51

Side Rail Jindal 20507 15 2 1.65 0.642 31.779

Interlocks Jindal 21145 15 4 1.65 0.985 97.515

Top Rail Jindal 19510 2 1 1 2.646 5.292

Side Bars Jindal 19510 2 2 2 2.646 21.168

Bottom Rail Jindal 19511 2 1 1 2.646 5.292

Centre Member 19525 2 1 1 1.679 3.358

49 21.3 Providing and fixing glazing in aluminium door, window,ventilator,shutter and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectual drawings and the directions of Engineer in charge(Cost of aluminium snap beading shall be paid in basic item)

21.3.1 With float glass panes of 4.0 mm thickness sqm

Windows W 15 1 2 1.65 49.5

21.3.2 With float glass panes of 5.50 mm thickness sqm

For Doors D 2 1 1 2 4

50 21.4 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

21.4.1 With stainless steel cover plate minimum 1.25 mm thickness Each

For Doors D 2 1 2

51 21.8 Filling the gap in between aluminium frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in Charge complete.

21.8.1 Up to 5mm depth and 5mm width metre

Windows W 15 7.3 109.5

52 21.13 Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Each

1 NS-1 Providing and fixing rubber shock absorbers of minimum 25 mm dia and 40 mm length to be fixed on back side of door including screws and nuts etc. all complete. Each

2 NS-2 Diluting & injecting chemical emulsion (excluding of the cost of the chemical emulsion) for PRE-CONSTRUCTIONAL ANTI TERMITE treatment and creating a continuos chemical barrier under all round the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes, conduits etc. complete as per specifications. (Plinth area of the building at ground floor only shall be measured for payment)

(A) Chloropyriphos/Lindane emulsifiable concentrate of 20% Sq.m.

Plinth Area 1 30.66 15 459.9

Total 474.43375

3 NS-3 Packing of 93 to 63mm size angular shaped stones with interstices filled with local sand, in layers not exceeding 300mm, ramming and watering each layer to make the sand settle perfectly into entire void space, compacting and developing a stable stone packed layer as per drawing and directions of Engineer-in-Charge including all works such as supply of material, labour, machinery, tools, tacjles, indidentals and all costs for material, labour, machinery, taxes, royalty, tranportation etc. WBM Cu.m.

Inside area of the building 1 30.14 14.54 0.23 100.794188

below reamp brick wall footing 1 11.5 0.445 0.3 1.53525

Total 106.689563

4 NS-4 Providing and laying 300µ PU coating sqm

Inside area of the building 1 30.14 14.54 438.2356

5 NS-5 Providing and fixing precoated galvanised steel sheet downspout 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using all suitable accessories for fixing including all material, labour, machinery, transportation, taxes, incidentals etc. as per the drawings, specifications and directions & instructions of Engineer-in-Charge Metre

For 4 nos dounspout 4 8 32

6 NS-6 Providing and fixing factory assembled 50mm thick Puf (overall density 40kg/cum ± 2kg/cum as per IS 11239 Part 2) sandwiched panels, sandwiched between steel sheets each of 0.5mm thickness confirming to ASTM 792M having an yield strength of 340 Mpa (min.), each sheet provided with hot dip coating of Zinc-aluminium alloy (approx. 55% Al., 43.5% Zn and 1.5% silicon)- total mass of coating to be 200 gm/sqmt incl of both sides and also provided with steel primer and silicon modified polyester (SMP) paint Sqm

For Side Wallls 2 30.66 4.15 254.478

For End Walls 2 15 4.15 124.5

For Canopy 1 5 3 15

Total 1354.60585

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

Ridges plain (500 - 600mm) Metre

Centre of the Building 1 30.66 30.66

Flashings/ Aprons.( Upto 600 mm) Metre

On both sides of the building 2 30.66 61.32

Barge board (Upto 300 mm) Metre

On both sides of the building 2 15.07481343 30.14962686

Crimp curve Sqm

On both sides of the building 2 30.66 61.32

Gutter .(600 mm over all girth) Metre

On both sides of the building 2 30.66 61.32

Rake Angle/Closer Trim/ Eave angle/Sill trim/miscellaneous wall sheet/soffit sheet etc. Sqm 2 30.66 0.5 30.66

7 NS-7 Extra for providing Sheeting fasteners- self tapping zinc plated metal screws with EPDM bonded zinc plated washers, with screws matching the color of wall sheeting. Sqm

Quantity same as that of Item No. NS-7 1354.60585

8 NS-8 Providing and fixing 2mm thick translucent polycarbonate sheets with with necessary EPDM/ rubber gaskets, silicon sealant, cold forged fastener, aluminium profile etc. including MS supporting structural steel framework (confirming to IS 1161/4923) frame to ensure water tight arrangement including the cost of all works, transportaion, material supply, machinery, labour, incidentals, taxes etc. as per the directions and instructions of Engineer-in-Charge.

12 nos 1m x 1.5m on both sides of wall Sqm 24 1 1.65 39.6

9 NS-9 Brick work with clay flyash F .P .S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Cement mortar 1:6 (1 cement : 6 coarse sand) Cum

For Drain all around the building 1 100.84 0.46 0.75 34.7898

Below Plinth Beam 18 4.7 0.23 0.75 14.5935

10 NS-10 Half brick masonry with common burnt clay F .P .S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand) Sqm

12 NS-12 Providing and fixing in roof sheeting self-propelled dia 600 throat turbo ventilator - zero maintance of approved make and size at roof level made from rotating heads having turbine blades of hi grade, aluminium top and neck of stainless steel 304 grade, steel bearing with dust proof bearing housing or gfp pushing instead of bearing with double action natural ventilation system powered by natural flow of air, boosts / extracts the hot and contaminated air / gases etc for healthy and improved environment inside and fixed with the adjoining roofing sheet / UV stabilised non coloured translucent FRP moulded one piece construction venture dome and matching to its shade of required profile and thickness, including the necessary frame and fixed in line and level, sealing the joint as water leakage proof etc. complete including testing for leage and as directed and specified by Engineer-in-Charge

Two in each Bay Each 2 6 12

NS-14 Providing and laying 125 microns Polythene sheet over cement concrete suface before laying R.C.C pavement

for flooring sqm 1 30.606 15 459.09

For ramp sqm 1 4.075 4.1 16.7075

BILL OF MATERIAL

STRUCTURAL WORK For 30x15 Shed

Sr. No. DSR'16 Item No. Description of Item Unit Nos Nos L B H/D Total Qty PORTAL FRAME

25 10.1 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. BILL OF MATERIAL

ISMB weight/ Weight of Plates 9268.34 ITEM NO. NOMENCLATURE LENGTH QTY UNIT WT TOTAL WT DECRIPTION

26 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 1 B/PLT 450x 25 THK 250 14 196.25 309.09 Base Plate for SC1

LS 50 2 STIFF. PLT. 300X8THK 250 28 62.8 131.88 Stiffener for base Plate at 1

3 MB 250X125 THK 7004 14 37.3 3657.49 ISMB Column SC1

27 10.6 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 4 B/PLT 400X16 THK 250 4 125.6 50.24 Base Plate for SC2

10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover Sqm 5 STIFF.PLT. 300X8THK 250 8 62.8 37.68 Stiffener for base Plate at 4

Two Nos Rolling Shutter 2 1 4 6 48 6 MB 200X100 7770 4 24.2 752.14 ISMB Column for SC2

Total 48 7 MB 200X100 7165 14 24.2 2427.50 Top Rafter

8 CUT MB 200X100 1029 7 12.1 84.70 Plate connecting two rafters

28 10.7 Providing and fixing ball bearing for rolling shutters. Each 9 2-PL 510X8THK 187 14 62.8 83.85 Cut Plate connecting two rafters

For Two Rolling Shutter 2 2 4 10 PL112X12THK 220 14 94.2 32.50 Rafter to Column Connecting Plate

Total 4 11 PL60X8THK 245 56 62.8 51.70 Top Plates for Columns SC1

12 CAP PL120X12THK 220 4 94.2 9.95 Top Plates for Columns SC2

29 10.8 Extra for providing mechanical device chain and crank operation for operating rolling shutters. 13 PL240X8THK 240 40 62.8 144.69 Sheet Supporting Plate Middle Grids

10.8.2 Exceeding 16.80 sqm in area sqm 14 STIFF PLT 100X8THK 230 56 62.8 80.89 Stiffener for 13 and 15

Two Nos Rolling Shutter 2 1 4 6 48 13a PL240X8THK 240 12 62.8 43.41 Sheet Support Plate Gable End

Total 48 14a STIFF.PLT.100X8THK 230 12 62.8 17.33 Stiffener for 13a

15 PL140X8THK 240 16 62.8 33.76 Sheet supporting Plate Corner

30 10.16 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer , including welding and bolted with special shaped washers etc. complete. 16 PL140X8THK 337 16 62.8 47.41 Sheet supporting Plate Corner

10.16.1 Hot finished welded type tubes kg 17 STIFF.PLT.100X8THK 327 16 62.8 32.86 Stiffener for 16

RHS and SHS 9416.29 18 STIFF.PLT.122X8THK 240 98 62.8 180.20 Rafter Top

19 PL92X8THK 112 98 62.8 63.41 Stiffener for 18

31 10.20 Providing and fixing bolts including nuts and washers complete. kg TOTAL WT IN KG 8272.67

For Nuts and Washers of purlins with rafter (LS Quantity) 30

32 10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. BILL OF MATERIAL

(a) 10.25.1 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete kg ITEM NO. NOMENCLATURE LENGTH QTY UNIT WT TOTAL WT DECRIPTION

Total 136.6 1 SHS 72x72x3.2 5686 8 6.7 304.77 Bracing Membre

2 SHS 72x72x3.2 2786 12 6.7 223.99 Cross Bracing to 1

(b) 10.25.2 In gratings, frames, guard bar , ladder , railings, bracket s, gates and similar works kg 3 SHS 72x72x3.2 2754 4 6.7 73.81 Cross Bracing to 1

450 mm long 20Ø rod 32.63 4 SHS 72x72x3.2 4747 4 6.7 127.22 Horizontal Membre Middle

Straight Bars LS 50 5 PLT.150x8THK. 206 8 62.8 15.52 Bottom gusset Plate

Total 82.625 6 PLT.233x8THK. 349 8 62.8 40.85 Middle Gusset Plate

7 PLT.150x8THK. 366 8 62.8 27.58 Cross Bracing Gusset Plates

33 10.26 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer . 8 PLT.193x8THK 248 8 62.8 24.05 Top Gusset plates

10.26.1 M.S. tube kg 9 SHS 72x72x3.2 4717 4 6.7 126.42 Horizontal Top Member

LS kg 15 SR1 RHS122x61x3.6 5325 8 9.67 411.94 Horizontal Main Membres

SR1A RHS122x61x3.6 5325 8 9.67 411.94 Horizontal Main Membres

11 NS-11 Providing Electroplated (Yellow chromate) Foundation Bolts of EN8 steel as per IS 20625, theraded and shaped as per drawing alongwith nuts and washers grouted into the RCC columns as shown in the drawing all complete including the cost of all labour, material, transportation, machinery, taxes, incidentals etc. SR2 RHS122x61x3.6 4990 32 9.67 1544.11 Horizontal Main Membres

Foundatio Bolt 16# 4 8 2.25 72 Ø12 SAG ROD 1611 36 0.888 51.50 Sag Rods

Foundatio Bolt 18# 14 8 6 672 TOTAL WT IN KG 3383.70

NS-13 Providing and fixing miscellaneous structural steel components (sag rods, etc.) in fixed with or without connecting plate, in all lengths, including cutting, threading, bolting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including

13.52 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.

13.52.1 On steel work

Total on structructural steel such as MB, RHS, SHS including plate & stiffeners plate 631.30 ROOFING

Rolling Shutter 2 2 1.1 4 6 105.6 BILL OF MATERIAL

ITEM NO. NOMENCLATURE LENGTH QTY UNIT WT TOTAL WT DECRIPTION

1 SHS72x72x3.2 5839 8 6.7 312.97 Bracing Member

Total 736.90 2 SHS72x72x3.2 2850 16 6.7 305.52 Cross bracing to 1

3 PLT152x8 194 16 62.8 29.63 Corner Gusset Plate

4 PLT194x8 308 8 62.8 30.02 Middle Gusset Plate

5 PLT150x8 359 8 62.8 27.05 Cross Bracing Gusset Plate

P1 RHS122x61x3.6 5325 14 9.67 720.90 Side Members

P1A RHS122x61x3.6 5325 14 9.67 720.90 Middle Members

P2 RHS122x61x3.6 4990 56 9.67 2702.18 Side Members

Ø12 SAG ROD 1611 72 0.888 102.99 Sag Rods

TOTAL WT IN KG 4952.17

BILL OF MATERIAL

ITEM NO. NOMENCLATURE LENGTH QTY UNIT WT TOTAL WT DECRIPTION

GR1/GR1A RHS 122x61x3.6 5323 16 9.67 823.57 Side Members

GR2 RHS 122x61x3.6 4090 4 9.67 158.20 Above Canopy

GR3 RHS 122x61x3.6 5100 2 9.67 98.63 Top Member

TOTAL WT IN KG 1080.42

BILL OF MATERIAL

ITEM NO. NOMENCLATURE LENGTH LENGTH QTY UNIT WT TOTAL WT

3 END PLATE 12mm THK 137 262 4 94.20 13.52

4 END PLATE 12mm THK 120 260 4 94.200 11.76

TOTAL WT IN KG 995.68

ISA 65X65X6 500 8 5.93 23.72 taking average length of 500 mm and 4 nos

Ø20 ROD 450 29 2.5 32.63 taking 300 mm c/c

CAGE RING 2320 16 0.6 22.27 taking 500 mm c/c

Lumpsum for Other remaining part 10.00

TOTAL WT IN KG 201.50

BILL OF MATERIAL

ITEM NO. NOMENCLATURE LENGTH QTY Breadth TOTAL Surface Area DECRIPTION

1 B/PLT 450x 25 THK 250 14 450 1.58 Base Plate for SC1

2 STIFF. PLT. 300X8THK 250 28 300 2.10 Stiffener for base Plate at 1

3 MB 250X125 THK 7004 14 1000 98.06 ISMB Column SC1

4 B/PLT 400X16 THK 250 4 125.6 0.13 Base Plate for SC2

5 STIFF.PLT. 300X8THK 250 8 300 0.60 Stiffener for base Plate at 4

6 MB 200X100 7770 4 800 24.86 ISMB Column for SC2

8 CUT MB 200X100 1029 7 800 5.76 Plate connecting two rafters

9 2-PL 510X8THK 187 14 510 1.34 Cut Plate connecting two rafters

10 PL112X12THK 220 14 112 0.34 Rafter to Column Connecting Plate

11 PL60X8THK 245 56 60 0.82 Top Plates for Columns SC1

12 CAP PL120X12THK 220 4 120 0.11 Top Plates for Columns SC2

13 PL240X8THK 240 40 240 2.30 Sheet Supporting Plate Middle Grids

14 STIFF PLT 100X8THK 230 56 100 1.29 Stiffener for 13 and 15

13a PL240X8THK 240 12 240 0.69 Sheet Support Plate Gable End

14a STIFF.PLT.100X8THK 230 12 100 0.28 Stiffener for 13a

15 PL140X8THK 240 16 140 0.54 Sheet supporting Plate Corner

16 PL140X8THK 337 16 140 0.75 Sheet supporting Plate Corner

17 STIFF.PLT.100X8THK 327 16 100 0.52 Stiffener for 16

18 STIFF.PLT.122X8THK 240 98 122 2.87 Rafter Top

19 PL92X8THK 112 98 92 1.01 Stiffener for 18

Lumsump for sides of plate 5.00

TOTAL SURFACE AREA IN SQM 231.19

BILL OF MATERIAL

ITEM NO. NOMENCLATURE LENGTH QTY Breadth TOTAL SURFACE AREA DECRIPTION

1 SHS 72x72x3.2 5686 8 288 13.10 Bracing Membre

2 SHS 72x72x3.2 2786 12 288 9.63 Cross Bracing to 1

3 SHS 72x72x3.2 2754 4 288 3.17 Cross Bracing to 1

4 SHS 72x72x3.2 4747 4 288 5.47 Horizontal Membre Middle

5 PLT.150x8THK. 206 8 150 0.25 Bottom gusset Plate

6 PLT.233x8THK. 349 8 233 0.65 Middle Gusset Plate

7 PLT.150x8THK. 366 8 150 0.44 Cross Bracing Gusset Plates

8 PLT.193x8THK 248 8 193 0.38 Top Gusset plates

9 SHS 72x72x3.2 4717 4 288 5.43 Horizontal Top Member

SR1 RHS122x61x3.6 5325 8 366 15.59 Horizontal Main Membres

SR1A RHS122x61x3.6 5325 8 366 15.59 Horizontal Main Membres

SR2 RHS122x61x3.6 4990 32 366 58.44 Horizontal Main Membres

Ø12 SAG ROD 1611 36 37.680 2.19 Sag Rods

Lumpsum for sides of plate 4.00

TOTAL SURFACE AREA IN SQM 121.23

BILL OF MATERIAL

ITEM NO. NOMENCLATURE LENGTH QTY Breadth TOTAL SURFACE AREA DECRIPTION

1 SHS72x72x3.2 5839 8 288 13.45 Bracing Member

2 SHS72x72x3.2 2850 16 288 13.13 Cross bracing to 1

3 PLT152x8 194 16 152 0.47 Corner Gusset Plate

4 PLT194x8 308 8 194 0.48 Middle Gusset Plate

5 PLT150x8 359 8 150 0.43 Cross Bracing Gusset Plate

P1 RHS122x61x3.6 5325 14 366 27.29 Side Members

P1A RHS122x61x3.6 5325 14 366 27.29 Middle Members

P2 RHS122x61x3.6 4990 56 366 102.28 Side Members

Ø12 SAG ROD 1611 72 37.680 4.37 Sag Rods

Lumpsum for side of plate 5.00

TOTAL SURFACE AREA 194.18

BILL OF MATERIAL

ITEM NO. NOMENCLATURE LENGTH QTY Breadth TOTAL SURFACE AREA DECRIPTION

GR1/GR1A RHS 122x61x3.6 5323 16 366 31.17 Side Members

GR2 RHS 122x61x3.6 4090 4 366 5.99 Above Canopy

GR3 RHS 122x61x3.6 5100 2 366 3.73 Top Member

TOTAL SURFACE AREA 41.44

BILL OF MATERIAL

ITEM NO. NOMENCLATURE LENGTH LENGTH QTY Width TOTAL SURFACE AREA

3 END PLATE 12mm THK 137 262 4 0.14

4 END PLATE 12mm THK 120 260 4 0.12

5 PLATE 8mm THK 92 112 12 0.12

6 PLATE 8mm THK 122 140 12 0.20

Lumpsum for sides of plate 0.60

TOTAL SURFACE AREA 31.11

Foundation bolt

Foundatio Bolt 16# 4 8 0.01256 0.40192

Foundatio Bolt 18# 14 8 0.019625 2.198

TOTAL SURFACE AREA 2.59992

CAGE RING 2320 16 50 1.86

Lumpsum for Other remaining part 1.00

TOTAL SURFACE AREA 9.53

TOTAL SURFACE AREA FOR PAINTING

Name of Package : Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

Package No : Supply and Installation Package Rfx: 5002004410

Specification No. : WR2/NT/W-CIVIL/DOM/G01/25/05179

Completion Period 3 Months

: Attachments : General guidelines for filling up the Attachments : Supply and Installation Package Rfx: 5002004410 :

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

Specification No.: WR2/NT/W-CIVIL/DOM/G01/25/05179

1 Fill up only green shaded cells in the relevent attachments.

2 Attachments 3(JV), 3(QR), Attach QR, 4, 4(A), 4(B), 5, 6, 7, 9, 10, 11, 12, 13, 14, 15, 16, 17,18, 19 and Bid Form for 1st Envelope are included here.

3 Attachment 1 Bid Security : Applicable

4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.

5 Attachment 8 Manufacturer’s Authorisation Form : Not Applicable

6 Attachment 14 Integrity Pact : To be submitted as per ITB Clause No. 9.3(n) and as per remarks in the Attach 14-IP.

7 Attachment 18 Safety Pact : Not Applicable

8 Attachment 20: Declaration of Key Managerial Person jointly with Power of Attorney holder

9 Attachment 21: Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII order, if applicable

10 Attachment 22: Certificate from statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content, in line with PPP-MII order and MoP order, if applicable [to be submitted on the letter head of the issuer.]

11 Attachment 23: Undertaking regarding submission of originalHard copy part of the bid

12 Attachment 24: Affidavit of Self Certification regarding Domestic Value Addition in Iron & Steel Products to be provided on a non-judicial stamp paper of Rs. 100/-. Not Applicable

13 Attachment 25: Compliance to the process related to the e-RA Terms & Conditions and the Business Rules governing the e-RA

14 Attachment 26:Declaration by the Bidder regarding events encountered pursuant to ITB Clause 2.1

15 Attachment 27:Certification by the Bidder as per DoE Order in line with ITB Clause 2.1

16 Attachment 28:Declaration by the bidder for ‘Code of Integrity for Public procurement’

Note : Enable the Active X Control & Macros. Also ensure to keep option of "Trust acess to VBA project object Model" cheched [√]. Ensure that you work on MS Excel 2007 or higher version.

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

WR2/NT/W-CIVIL/DOM/G01/25/05179 Sole Bidder 1

Yes JV (Joint Venture) 2 or More

Enter following details of the bidder No

Specify type of Bidder [Select from drop down menu] Sole Bidder Sole Bidder 2 0

Address of Bidder

Whether the bidder is an MSE (Micro & Small Enterprise) 0 2 2 0 2019

Enter the Name of Registration Authority 2020

E-mail ID of Bid Signatory

Mobile No. of Bid Signatory

Tel No. of Bid Signatory

Fax No. of Bid Signatory MSE 0

Name of other Partner Ram Lal

Address of other Partner G5

Name of other Partner - 2 (more, if any)

Address of other Partner - 2 (more, if any)

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-3(JV) Sole Bidder

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Joint Venture Agreement and Power of Attorney for Joint Venture*)

Bidder’s Name and Address : To:

Contract Services & Ram Lal

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 RHQ, Plot No 54 Vadodara-390008

This Attachment is Not Applicable

Name(s) and Addresse(s) of other partner(s)

The Joint Venture Agreement (as per the proforma attached at no. 15 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) and Power of Attorney for Joint Venture (as per the proforma attached at no. 14 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) are enclosed herewith Sole Bidder

Date : -- Printed Name : 0

Place : Designation : 3

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-3(QR)

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Qualifying Requirement Data)

Bidder’s Name and Address (Lead Partner of) : To:

Contract Services

Name: 0 Power Grid Corporation of India Ltd.,

Address: 0 "Saudamini", Plot No. 2, Sector 29

0 Gurgaon (Haryana) - 122001

In support of the Qualification Requirements (QR) for bidders, stipulated in Annexure-A (BDS) of the Section - III (BDS), Volume-I & Additional Information required as per ITB clause 9.3(c) of the Bidding Documents, we furnish herewith our QR data/details along with other information, as follows herewith our stipulations have been reproduced in italics for ready reference, however, in case of any discrepancy the QR as given in BDS shall prevail).

* We have submitted bid as individual firm.

* We have submitted bid as joint venture of following firms :

(ii) #REF! 2 or more

(* Strike-off whichever is not applicable)

[For details regarding Qualification Requirements of a Joint Venture, please refer para 4.0 below.]

We are furnishing the following details/document in support of Qualifying requirement for the subject package.

A Attached copies of original documents defining :

a) The constitution or legal status;

b) The principal place of business;

c) The place of incorporation (for bidders who are corporations); or the place of registration and the nationality of the Owners (for applicants who are partnerships or individually-owned firms).

B Attached original & copies of the following documents :

a) Written power of attorney of the signatory of the Bid to commit the bidder.

b) Joint Venture Agreement.

1.0 GENERAL INFORMATION

Bidder is required to provide general information as per the following format.

[Where the Bidder proposes to use named subcontractor(s) for critical components of the works or for work contents in excess of ten (10) percent of the bid price, the following information should also be supplied for the subcontractor(s)].

S No. Particulars Name of the Bidder

1 Name of the Firm

2 Head Office/ Registered Office Address

5 Contact Person

6 Place of Incorporation/ Registration

7 Year of Incorporation/ Registration

8 Nationality of

9 Whether the bidder is an MSE (Micro & Small Enterprise). If Yes, attach Documentary Evidence with the Bid. No

10 Whether the Bidder is a Start-Ups Company (as defined by DIPP). If Yes, attach Documentary evidence with the Bid.

2.0 TECHNICAL REQUIREMENTS {Reference para 1.0 of Annexure-A (BDS)}

2.1 TECHNICAL EXPERIENCE

2.1.1 Route-1: The bidder must have designed, manufactured, tested & supplied 715 kV or higher voltage class one (1) number 1-phase Transformer of at least 500 MVA capacity or at least three (3) numbers 1-phase Transformers each having a capacity of at least 166 MVA, and the same transformer (s) should have been in satisfactory operation# for at least two (2) years on the date of bid opening as originally scheduled i.e., as on .………….(date to be inserted by CS department at the time of NIT).

2.1.2 Route-2: The bidder (s) who have established production line and testing facilities in India for 715 kV or above class transformer based on technological support of the Collaborator(s) for the equipment(s) can also be considered qualified provided, The bidder must have manufactured in India, type tested 715 kV or higher voltage class either One (1) no. 1-phase Transformer of at least 166 MVA capacity or One (1) no. 1-phase Reactor of at least 80 MVAR capacity and the same should have been supplied as on the date of bid opening as mentioned above based on technological support of Collaborator(s) provided that:- a) Collaborator(s) meets the Technical Experience criteria stipulated in Route-1. b) A legally enforceable undertaking jointly by Bidder and the Collaborator(s) (as per enclosed format in---------- of bidding document) is furnished along with the bid, to guarantee quality, timely supply, performance and warranty obligations for Five(5) years for entire quantity to be manufactured and supplied from the works in India and a confirmation letter from the Collaborator(s) along with the bid stating that Collaborator(s) shall furnish performance guarantee for an amount of 10% of the cost of such equipment(s). This performance guarantee shall be in addition to contract performance guarantee to be submitted by the bidder.

2.1.3 Route-3: In case, the bidder is an Indian Entity established as Subsidiary/JVC/Group company by its parent/principal, who have established production line and testing facilities in India for 715 kV or above class transformer based on technological support of the parent/principal for the equipment(s) can also be considered qualified provided, The bidder must have manufactured in India, type tested 715 kV or higher voltage class either One (1) no. 1-phase Transformer of at least 166 MVA capacity or One (1) no. 1-phase Reactor of at least 80 MVAR capacity and the same should have been supplied as on the date of bid opening as mentioned above based on technological support of Parent/ principal company provided that:- a) Parent / Principal Company meets the Technical Experience criteria stipulated in Route-1. b) A legally enforceable undertaking jointly by Bidder and the parent/ principal company (as per enclosed format in---------- of bidding document) is furnished along with the bid, to guarantee quality, timely supply, performance and warranty obligations for Five(5) years for entire quantity to be manufactured and supplied from the works in India and a confirmation letter from the parent/principal company along with the bid stating that parent/ principal company shall furnish performance guarantee for an amount of 10% of the cost of such equipment(s). This performance guarantee shall be in addition to contract performance guarantee to be submitted by the bidder.

In case bidder is a holding company, the technical experience referred to in para 2.1.1, 2.1.2 & 2.1.3 above shall be of that holding company only (i.e. excluding its subsidiary/group companies). In case bidder is a subsidiary of a holding company, the technical experience referred to in para 2.1.1, 2.1.2 & 2.1.3 above shall be of that subsidiary company only (i.e. excluding its holding company).

#satisfactory operation means certificate issued by the Employer certifying the operation without any adverse remarks.

2.1.4 Using the following format, each Bidder (individual firms or partners of a joint venture) is requested to list the experience as detailed above, on the basis of which the Bidder wishes to qualify. The information is to be summarised using following format for each experience of the Bidder

(The bidder shall attach documentary evidence, such as copies of utility certificates for completed contracts and copies of award letters etc. for ongoing contracts in support of his experience as listed in the following proforma for each Contract with the help of "Attach" Buttons provided in table given below).

2.2 Kindly mention below, whether 765 kV/ 400kV transformer(s) are being offered from Bidder himself OR from a qualified manufacturer [required to ascertain compliance to QR provision mentioned at para 1(C ), Annexure-A(BDS)].

(A) 765 kV Transformers being offered:

2.3 Format-A: (ROUTE-1) for 765kV Auto Transformer:

Format for the Bidder/ Collaborator/ Parent/Principal Company/Qualified Manufacturer of the Bidder who must have designed, manufactured, tested & supplied 715kV or Higher Voltage class Transformer in support of meeting the technical experience requirement of para 1(A) 1.1, Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents)

1 Name of Bidder/Qualified Manufacturer (as applicable) : 0 0

2 Name & Address of the Collaborator/Parent /Principal Company (if applicable) 0

3 Name of Contract Undertaken (for 715kV or Higher Voltage class Transformers)

4 Contract Reference No. & Date of Award

5 Name and Address of the Employer/Utility for whom the Contract was executed by the firm

6 Voltage Level of Transformer erected under the Contract (Indicate 715kV or above class only)

7 Indicate Number of Transformer(s) under the above contract (1 phase Transformers with rating not less than 500 MVA OR Transformers in Banks of 3 single phase units of at least 166 MVA each)

8 MVA capacity of above mentioned 1-phase units

9 Name of the substation or switchyard

10 No. of years, the above Transformer are in operation as on the date of bid opening. (Originally Scheduled)

11 Scope of work involved under the Contract

(Tick whichever is/are applicable) of Transformer of Transformer of Transformer

12 Details of documents uploaded in support of the above stated experience

2.4 Format-B: (ROUTE-2) for 765kV Auto Transformer:

Format for Bidder(s)/ Manufacturer [who have established production line and testing facilities in India for 715kV or above class Transformer based on Technology Support of Collaborator(s)], in support of meeting the requirement of para 1(A) 1.2 (Route-2), Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents

a Name of Bidder/Manufacturer

b Whether Bidder/Manufacturer has established production line and testing facilities in India for 715 kV or above class Transformer on the technological support of the Collaborator(s) ?

c Name of the Collaborator {The qualifying data/details for collaborator for the equipment is to be furnished in Format-A above)

Data/details of the Bidder/Manufacturer wishes/proposes to qualify through Route-2(Para 1.2, Annexure-A (BDS)), to be furnished below:

1 Name of Contract Undertaken

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility for whom the Contract was executed by the Bidder

4A Indicate details below in case Contract executed for Transformer

(i) Voltage Level of Transformer manufactured & type tested under the Contract based on technological support of Collaborator. (Indicate 715kV or above class only)

(ii) MVA capacity of the above mentioned single phase Transformers

(iii) Indicate Number of Transformer(s) under the contract (Indicate nos. of single phase Transformer of atleast 166MVA)

(iv) Name of the substation or switchyard

(v) Date as on which the above mentioned Transformers supplied

(vi) whether the above Transformers are in operation as on the date of bid opening(originally scheduled).(Yes/No)

(vii) Scope of work involved under the Contract

(Tick whichever is/are applicable)

of Transformer of Transformer of Transformer

4B Indicate detail below in case Contract executed for Reactor

i Voltage Level of Reactor manufactured & type tested under the Contract based on technological support of Collaborator. (Indicate 715kV or above class only)

ii MVAR capacity of the above mentioned single phase Reactors

iii Indicate Number of Reactor(s) under the contract (Indicate nos. of Reactor(s) of at least 80 MVAR each)

iv Name of the substation or switchyard

v Date as on which the above mentioned Reactors are supplied.

vi whether the above Reactors are in operation as on the date of bid opening(originally scheduled).(Yes/No)

vii No. of years, the above Reactors are in operation as on the date of bid opening (originally scheduled).

vii Scope of work involved under the Contract

(Tick whichever is/are applicable) for Reactor for Reactor for Reactor

5 Whether collaborator(s) meets the technical experience criteria stipulated at 2.1.1 above, and the details of which is mentioned at Format-A above. (Applicable for the Bidder wish/proposes to qualify through Route-2 of Annexure-A(BDS)) Yes

6 Whether legally enforceable undertaking jointly by Bidder/Manufacturer and the Collaborator(s) (as per enclosed format in Section-VI: Sample Forms and Procedures of bidding document) is furnished along with the bid. (Applicable for the Bidder/Manufacturer(s) wish/proposes to qualify through Route-2 of Annexure-A(BDS))

7 Confirmation letter from the Collaborator along with the bid stating that Collaborator shall furnish performance guarantee, in addition to contract performance guarantee to be submitted by the bidder, for an amount of 10% of the cost of equipment(s) to be manufactured and supplied from the works in India. (Applicable for the Bidder/Manufacturer(s) wish/proposes to qualify through Route-2 of Annexure-A(BDS)) (Choose whichever is applicable from the drop down menu)

8 Details of documents uploaded in support of the above stated experience

2.5 Format-C: (ROUTE-3) for 765kV Auto Transformer:

Format for Manufacturer of the Bidder/ Indian entity established as Subsidiary/ JVC/ Group Company by its Parent/ Principal, who have established production line and testing facilities in India for 715kV or above class Transformer, in support of meeting the requirement of para 1(A) 1.3, Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents)

a Name of Bidder/ Manufacturer

b Whether the bidder is an Indian Entity established as Subsidiary/JVC/Group company by its parent/principal, who have established production line and testing facilities in India for 715 kV or above class transformer based on technological support of the parent/principal?

c Name & Address of the Parent/Principal Company {The qualifying data for the Parent/Principal Company for the equipment is to be furnished in Format-A above)

Data/details of the Bidder/Manufacturer wishes/proposes to qualify through Route-3 (Para 1.3, Annexure-A (BDS)), to be furnished below:

1 Name of Contract Undertaken

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility for whom the Contract was executed by the firm

4A Indicate detail below in case Contract executed for Transformer

i Voltage Level of Transformer manufactured & type tested under the Contract . (Indicate 715kV or above class only)

ii Indicate Number of Transformer(s) under the contract (Indicate nos. of single phase Transformer of atleast 166MVA )

iii MVA capacity of the above mentioned single phase Transformers

iv Name of the substation or switchyard

v Date as on which the above mentioned Transformers supplied

vi whether the above Transformers are in operation as on the date of bid opening(originally scheduled).(Yes/No)

vii No. of years, the above Transformers are in operation as on the date of bid opening (originally scheduled).

viii Scope of work involved under the Contract

(Tick whichever is/are applicable) of Transformer of Transformer of Transformer

4B Indicate detail below in case Contract executed for Reactor

i Voltage Level of Reactor manufactured & type tested under the Contract (Indicate 715kV or above class only)

ii MVAR capacity of the above mentioned single phase Reactors

iii Indicate Number of Reactor(s) under the contract (Indicate nos. of Reactor(s) of at least 80 MVAR )

iv Name of the substation or switchyard

v Date as on which the above mentioned Reactors are supplied.

vi whether the above Reactors are in operation as on the date of bid opening(originally scheduled).(Yes/No)

vii No. of years, the above Reactors are in operation as on the date of bid opening(originally scheduled)..

viii Scope of work involved under the Contract

(Tick whichever is/are applicable) for Reactor for Reactor for Reactor

5 Whether Parent/Principal company(s) meets the technical experience criteria stipulated at 2.1.1 above, and the details of which is mentioned at Format-A above. (Applicable for the Bidder/Manufacturer(s) wish/proposes to qualify through Route-3 of Annexure-A(BDS))

6 Whether legally enforceable undertaking jointly by Bidder/Manufacturer and the Parent/Pricipal company(s) (as per enclosed format in Section-VI: Sample Forms and Procedures of bidding document) is furnished along with the bid. (Applicable for the Bidder/Manufacturer(s) wish/proposes to qualify through Route-3 of Annexure-A(BDS))

7 Confirmation letter from the Parent/Principal Company along with the bid stating that Parent/Principal Company shall furnish performance guarantee, in addition to contract performance guarantee to be submitted by the bidder, for an amount of 10% of the cost of equipment(s) to be manufactured and supplied from the works in India. (Applicable for the Bidder wish/proposes to qualify through Route-3 of Annexure-A(BDS))

8 Details of documents uploaded in support of the above stated experience

3.0 Financial Position {Reference para 2.0 of Annexure-A (BDS)}

a) Net Worth for last 3 financial years should be positive.

b) Minimum Average Annual Turnover^ (MAAT) for best three (3) years i.e. 36 months out of last five (5) financial years of the bidder should be Rs. 1451.18 million or equivalent for Auto Transformer TR09. ^ Annual gross revenue from operations/gross operating income as incorporated in the profit & loss account excluding other income”.

c) Bidder shall have liquid assets (L.A.) or/and evidence of access to or availability of credit facilities of not less than Rs. 241.86 million or equivalent for Auto Transformer TR09.

Note: (i) In case bidder is a holding company, the Financial Position criteria referred to in para 3.0 above shall be that of holding company only (i.e. excluding its subsidiary / group companies). In case bidder is a subsidiary of a holding company, the Financial Position criteria referred to in para 3.0 above shall be that of subsidiary company only (i.e. excluding its holding company). (ii) In case bidder has established manufacturing facility in India and yet to complete three (3) financial years, the Net Worth and average of the turnover as per financial statement for completed financial years shall be considered for the purpose of compliance to the specified Net Worth and MAAT requirements. (iii) In case of bidder qualifying through Route-3 but not meeting the Financial Position requirement as per note (i) read along with note (ii) above, the following shall be applicable: In case bidder is yet to complete five (5) years from the date of commercial production of such equipment(s) but no later than seven (7) years from the date of incorporation of the said company as on the originally scheduled date of bid opening as above, the financial position requirement as per para 3.0 (b) & (c) of parent/principal company providing collaboration for technological support shall be considered. However, once he meets the turnover requirement on their own or completes five (5) years from the date of commercial production of such equipment (s) in India but no later than seven (7) years from the date of incorporation as on the originally scheduled date of bid opening as above, the financial position requirements as specified at 3.0 (b) and (c) above shall be required to be met by such bidder on their own as per note (i) above and not based on their parent/principal company. Further, in case the bidder is yet to complete one (1) financial year, the Net worth requirement as per para 3.0 (a) above of parent/principal shall be considered.

(iv) Relaxation for Start-Ups^/ MSEs Start-Ups^/ MSEs, meeting the specified requirements at Para 3.0 (a) above in Financial Position shall also be considered qualified if they meet Eighty (80) % of the requirement specified at Para 3.0 (b) & 3.0 (c) above in Financial Position. ^ Start-Ups as defined by DIPP, applicable as on the originally scheduled date of bid opening.

{In support of its ‘Financial Position’, in line with the above, the Bidder or Company/Constituents must provide the relevant information in support of the same, along with documentary evidence, in the following format}

4.0 Financial Qualification Data: 2 or more

4.1 Name of the Bidder

Networth (in Rs. Millions) Details of documentary evidence submitted in support of Qualification Data

Sl No Financial year

For the FY of immediately preceding the date of submission of bid.

B Turnover details:

Turnover (in Rs. Millions) Details of documentary evidence submitted in support of Qualification Data

Sl No Financial year

For the FY of immediately preceding the date of submission of bid.

Average Annual Turnover for best Three Years is

C Liquid Assets

LA (in Rs. Millions) Details of documentary evidence submitted in support of Qualification Data

Details of evidence of having Liquid assets (LA)

Details of evidence of access to or availability of credit facilities

5.0 Financial Qualification Data for Parent/Principal Company (If Applicable):

5.1 Name of the Bidder

Details of documentary evidence submitted in support of Qualification Data

Networth (in Rs. Millions)

Sl No Financial year

For the FY of immediately preceding the date of submission of bid.

B Turnover details:

Details of documentary evidence submitted in support of Qualification Data

Turnover (in Rs. Millions)

Sl No Financial year

For the FY of immediately preceding the date of submission of bid.

Average Annual Turnover for best Three Years is

C Liquid Assets

LA (in Rs. Millions) Details of documentary evidence submitted in support of Qualification Data

Details of evidence of having Liquid assets (LA)

Details of evidence of access to or availability of credit facilities

Equivalent US$ (in Million) exchange rate* Details of documentary evidence submitted in support of Qualification Data

Networth (in Millions)

Sl No Financial year

Do you have audited results for FY 2016-17 Yes

*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)

B Turnover details:

Equivalent US$ (in Million) exchange rate* Details of documentary evidence submitted in support of Qualification Data

Turnover (in Millions)

Sl No Financial year

Do you have audited results for FY 2016-17 Yes

*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)

C Liquid Assets

LA Equivalent US$ (in Million)

Details of evidence of having Liquid assets (LA)

Details of evidence of access to or availability of credit facilities

Equivalent US$ (in Million) exchange rate* Details of documentary evidence submitted in support of Qualification Data

Networth (in Millions)

Sl No Financial year

Do you have audited results for FY 2016-17 Yes

*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)

B Turnover details:

Equivalent US$ (in Million) exchange rate* Details of documentary evidence submitted in support of Qualification Data

Turnover (in Millions)

Sl No Financial year

Do you have audited results for FY 2016-17 Yes

Average Annual Turnover for best Three Years is

*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)

C Liquid Assets

LA Equivalent US$ (in Million)

Details of evidence of having Liquid assets (LA)

Details of evidence of access to or availability of credit facilities

4.0 Joint Venture (JV) Firms {Reference para 3.0 of Annexure-A (BDS)}

In case a bid is submitted by a Joint Venture (JV) of two or more firms as partners, all the partners of Joint Venture shall meet collectively requirements stipulated at clauses 3.0 (b) & 3.0 (c) above. The figure of average annual turnover and liquid assets/credit facilities for each of the partners of the JV shall be added together to determine the JV’s compliance with the minimum qualifying criteria set out in Para 3.0 (b) & (c) above.

However, for a JV to be qualified, the partner(s) of JV must also meet the following minimum criteria: i. All the partners of the JV shall meet individually the Financial Position criteria given at 3.0 (a) above. ii. The Lead Partner shall meet, not less than 40% of the minimum criteria given at clause 3.0 (b) & (c) and 100 % of the criteria given above at clause 2.1 iii. The other partner(s) shall meet not less than 25% of the criteria given at clause 3.0 (b) & (c) above and 100 % of the criteria given above at clause 2.1 or 2.2 Failure to comply with this requirement will result in rejection of the joint venture’s bid.

In case of Joint venture, the following conditions shall also apply:

(a) the bid, and in case of successful bid, the specified Form of Agreement shall be signed so as to be legally binding on all partners (as per enclosed format in Section-VI, Vol.-I of bidding document).

(b) one of the partners shall be nominated as Lead Partner, and the Lead Partner shall be authorized to incur liabilities and receive instructions for and on behalf of any and all partners of the Joint Venture, and the entire execution of the Contract shall be done with the Lead Partner and payment under the contract shall be received by the Lead Partner on behalf of the Joint Venture as per power conferred to him in the Power of Attorney. The authorization shall be evidenced by submitting a Power of Attorney signed by legally authorized signatory of all the partners as per Performa in in Section-VI, Vol.-I of bidding documents. The payment under the Contract can also be received by other partner(s) based on authorization of Lead Partner.

(c) All partners of the joint venture shall be liable jointly and severally for the execution of the Contract in accordance with the Contract terms and a statement to this effect shall be included in the authorisation mentioned under (b) above as well as in the Bid Form and in the Contract Form (in case of a successful bid);

(d) Agreement entered into by the Joint Venture partners shall be submitted with the bid.

The bidder shall furnish documentary evidence in support of the qualifying requirement stipulated as above.

4.1 In accordance with the above, in case of JV bidders, it should be ensured that necessary details including those pertaining to each JV partner are furnished and the documents are submitted alongwith the bid. Further, the JV bidders should also ensure that other requirements are complied with. The lists of documents furnished are to be indicated below :

A For Name of the Bidder

6.0 The Bidder shall also furnish following documents/details with its bid. {Reference ITB clause 9.3 (c)}

6.1 The complete annual reports together with Audited statement of accounts of the company for last five years of its own (separate) immediately preceding the date of submission of bid.

Note I. In the event the bidder is not able to furnish the information of its own (i.e separate), being a subsidiary company and its accounts are being consolidated with its group/holding/parent company, the bidder should submit the audited balance sheets, income statements, other information pertaining to it only (not of its group/Holding/Parent Company) duly certified by any one of the authority [ (i) Statutory Auditor of the bidder /(ii) Company Secretary of the bidder or (iii) A certified Public Accountant] certifying that such information/documents are based on the audited accounts as the case may be.

II. Similarly, if the bidder happens to be a Group/Holding/Parent Company, the bidder should submit the above documents/information of its own (i.e. exclusive of its subsidiaries) duly certified by any one of the authority mentioned in Note-I above certifying that these information/documents are based on the audited accounts, as the case may be.

6.2 The Bidder should accordingly also provide the following information/documents

Audited balance sheet and income statements for the last five years as per the following:

A Years preceding to the bid opening Audited Balance Sheet and Income Statements enclosed

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-3(QR)

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Qualifying Requirement Data)

Bidder’s Name and Address : To:

Contract Services

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 RHQ, Plot No 54 Vadodara-390008

For our Qualifying Requirements Data, please refer Schedule-QR of this volume.

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Qualifying Requirement Data)

Bidder’s Name and Address : To:

Contract Services

Name: 0 Power Grid Corporation of India Ltd.,

Address: 0 Western Region Transmission System-II

0 RHQ, Plot No 54 Vadodara-390008

In support of the Qualification Requirements (QR) for bidders, stipulated in Annexure-A (BDS) of the Section - III (BDS), Volume-I & Additional Information required as per ITB clause 9.3(c) of the Bidding Documents, we furnish herewith our QR data/details along with other information, as follows herewith our stipulations have been reproduced in italics for ready reference, however, in case of any discrepancy the QR as given in BDS shall prevail).

* We have submitted bid as individual firm.

* We have submitted bid as joint venture of following firms :

(* Strike-off whichever is not applicable)

[For details regarding Qualification Requirements of a Joint Venture, please refer para 4.0 below.]

We are furnishing the following details/document in support of Qualifying requirement for the subject package.

A Attached copies of original documents defining :

a) The constitution or legal status;

b) The principal place of business;

c) The place of incorporation (for bidders who are corporations); or the place of registration and the nationality of the Owners (for applicants who are partnerships or individually-owned firms).

B Attached original & copies of the following documents :

a) Written power of attorney of the signatory of the Bid to commit the bidder.

b) Joint Venture Agreement.

1.0 GENERAL INFORMATION

Bidder is required to provide general information as per the following format.

[Where the Bidder proposes to use named subcontractor(s) for critical components of the works or for work contents in excess of ten (10) percent of the bid price, the following information should also be supplied for the subcontractor(s)].

S No. Particulars Name of the Bidder

1 Name of the Firm 0

2 Head Office/ Registered Office Address

5 Contact Person

6 Place of Incorporation/ Registration

7 Year of Incorporation/ Registration

8 Nationality of

9 Whether the bidder is an MSE (Micro & Small Enterprise). If Yes, attach Documentary Evidence with the Bid.

10 Whether the Bidder is a Start-Ups Company (as defined by DIPP). If Yes, attach Documentary evidence with the Bid.

2.0 TECHNICAL REQUIREMENTS {Reference para 1.1 of Annexure-A (BDS)}

2.1 TECHNICAL EXPERIENCE

2.1.1 1.1 Technical Experience Bidder should have successfully completed “Similar Works” for Govt. Or Semi Govt., OR private sector organizations during 7(seven) years immediately preceding originally stipulated date of bid opening of value not less than that specified below: i. One Similar Work of value not less than Rs. 2.725 Crore OR ii Two Similar Works-each of value not less than Rs. 1.703 Crore OR iii. Three Similar Works, each of value not less than Rs. 1.362 Crore “Similar Works” shall mean “Any Type of Prefabricated Building/PEB work”.

2.1.2 Using the following format, each Bidder is requested to list the experience as detailed above, on the basis of which the Bidder wishes to qualify. The information is to be summarised using following format for each experience of the Bidder

(The bidder shall attach documentary evidence, such as copies of utility certificates for completed contracts and copies of award letters etc. for ongoing contracts in support of his experience as listed in the following proforma for each Contract with the help of "Attach" Buttons provided in table given below).

Format for the Bidder in support of meeting the requirement of para 1.1.1, Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents)

Bidder’s Name :

Details of Contract No.-1 Details of Contract No.-2 Details of Contract No.-3

1 Name of Contract Undertaken

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility for whom the Contract was executed by the firm

4 Nature of the Building Works (institutional / commercial / Residential buildings)

5 Whether the Work executed as a Prime Contractor?

6 Total value of the Contract in INR Crores?

7 Completion Date of the above mentioned Work

8 Details of documents uploaded in support of the above stated experience

3.0 FINANCIAL REQUIREMENTS :

Financial Position {Reference para 1.2 of Annexure-A (BDS)}

(a) Minimum Average Annual Turnover (MAAT)* for the best three financial years out of last five financial years (i.e. 2019-20, 2020-21, 2021-22, 2022- 23 & 2023-24) of the bidder shall be ₹ Rs. 5.11 Cr . * Note-Annual total income as incorporated in the profit & loss account except non-recurring income, i.e., sale of fixed assets Note: (a) In case the bidder is a holding company, financial requirements stipulated in clause 3.1 above shall be that of holding company only (i.e. excluding its subsidiary/group companies). In case the bidder is a subsidiary of a holding company, financial requirements stipulated in clause 3.1 above shall be of that subsidiary company only (i.e. excluding its holding company). (b) For Start-up (Start-up as defined by DIPP, applicable as on the originally scheduled date of bid opening), meeting the eighty percent (80%) specified requirement at para 3.1 above in Financial Position shall be considered to fulfil the Financial Position requirement for entire package. (c) For MSE bidders: 100% relaxation in financial requirement of MAAT for the subject package.

{In support of its ‘Financial Position’, in line with the above, the Bidder (in case of bidding by single firm ) or Company/Constituents must provide the relevant information in support of the same, along with documentary evidence, in the following format}

4.0 Financial Qualification Data:

Details of documentary evidence submitted in support of Qualification Data

Networth (in Rs. Millions)

Sl No Financial year

Do you have complete annual reports together with Audited statement of accounts of the company for FY 2021-22 (refer ITB Clause 9.3(c)) Yes

B Turnover details:

Details of documentary evidence submitted in support of Qualification Data

Turnover (in Rs. Millions)

Sl No Financial year

Do you have complete annual reports together with Audited statement of accounts of the company for FY 2021-22 (refer ITB Clause 9.3(c)) Yes

Average Annual Turnover for best Three Years is

C Liquid Assets

LA (in Rs. Millions) Details of documentary evidence submitted in support of Qualification Data

Details of evidence of having Liquid assets (LA)

Details of evidence of access to or availability of credit facilities

5.0 The Bidder shall also furnish following documents/details with its bid. {Reference ITB clause 9.3 (c)}

5.1 The complete annual reports together with Audited statement of accounts of the company for last five years of its own (separate) immediately preceding the date of submission of bid.

Note I. In the event the bidder is not able to furnish the information of its own (i.e separate), being a subsidiary company and its accounts are being consolidated with its group/holding/parent company, the bidder should submit the audited balance sheets, income statements, other information pertaining to it only (not of its group/Holding/Parent Company) duly certified by any one of the authority [ (i) Statutory Auditor of the bidder /(ii) Company Secretary of the bidder or (iii) A certified Public Accountant] certifying that such information/documents are based on the audited accounts as the case may be.

II. Similarly, if the bidder happens to be a Group/Holding/Parent Company, the bidder should submit the above documents/information of its own (i.e. exclusive of its subsidiaries) duly certified by any one of the authority mentioned in Note-I above certifying that these information/documents are based on the audited accounts, as the case may be.

5.2 The Bidder should accordingly also provide the following information/documents

Audited balance sheet and income statements for the last five years as per the following:

A Years preceding to the bid opening Audited Balance Sheet and Income Statements enclosed

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-4

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Form of Certificate of Origin and Eligibility)

Bidder’s Name and Address : To:

Contract Services

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 RHQ, Plot No 54 Vadodara-390008

We hereby certify that equipment and materials to be supplied are produced in [Name of Countries], eligible source country. Equipments & Materials produced in [Name of countries] Company incorporated & registered in [Name of countries]

We hereby certify that our company is incorporated and registered in [Name of Countries], eligible source country. [Name of Countries] [Name of Countries] [Name of Countries], [Name of Countries],

Date : -- Printed Name :

Place : Designation :

country. country. [Name of Countries], [Name of Countries],

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-4(A)

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(List of Special Maintenance Tools & Tackles)

Bidder’s Name and Address : To:

Contract Services

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 RHQ, Plot No 54 Vadodara-390008

We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles are included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:

S.No. For Equipment Item Description Unit Quantity

Notwithstanding what is stated above, we further confirm that any additional special maintenance tools and tackles, required for the equipment under this package shall be furnished by us at no extra cost to the employer.

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-4(B)

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(List of Special Maintenance Tools & Tackles)

Bidder’s Name and Address : To:

Contract Services

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 RHQ, Plot No 54 Vadodara-390008

We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles which are to be taken back after the completion of the work by us are not included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-5

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Bought-out & Sub-contracted Items)

Bidder’s Name and Address : To:

Contract Services

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 RHQ, Plot No 54 Vadodara-390008

This Attachment is Not Applicable

We hereby furnish the details of the items/ sub-assemblies, we propose to buy for the purpose of furnishing and installation of the subject Package:

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details / write-up to engage the Locals sub-contractor/sub-vendor

Name Nationality

We hereby declare that, we would not subcontract the erection portion of the contract without the prior approval of Employer.

We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additional to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above. In line with ITB Clause 9.3 (e), we intend to supply following items which are to be manufactured within Arunachal Pradesh. We further declare that we would source material / services for atleast 30% of the Installation Price of Services contract from within Assam

Sl. No. Item Description Quantity proposed to be supplied Details / write-up to engage the Locals sub-contractor/sub-vendor

Name of Plant Address

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Annexure I to Attachment-5

(Bought-out & Sub-contracted Items)

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details / write-up to engage the Locals sub-contractor/sub-vendor

Name Nationality

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Annexure I to Attachment-5

(Bought-out & Sub-contracted Items)

Sl. No. Item Description Details of the proposed sub-contractor/sub-vendor Details / write-up to engage the Locals sub-contractor/sub-vendor

Name Nationality

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-5A

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises)

Bidder's Name and Address: To:

Contract Services

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 RHQ, Plot No 54 Vadodara-390008

Dear Sir, This Attachment is Not Applicable

1 We hereby furnish the details of the items, components, raw material, services which we propose to buy/avail from Micro and Small Enterprises (MSEs) for the purpose of completion of works under the subject package:

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Name of Micro and Small Enterprises (MSEs)

Name Category (Micro or Small)

2 The above is a list of items we propose to procure from MSEs. However, based on the situations during the execution of the contract, the above list may undergo changes. We hereby confirm that the details regarding actual procurement from MSEs carried out by us, as per the format provided at Section VI, Forms and Procedures, Volume-I of bidding documents, shall be submitted along with the bills for payment against supplies made/works done during execution of contract.

We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additiona to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above.

Sl. No. Item Description Quantity proposed to be supplied Details of the plant from where supplies are proposed.

Name of Plant Address

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-5A

(Bought-out & Sub-contracted Items)

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Name of Micro and Small Enterprises (MSEs)

Name Category (Micro or Small)

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-6

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Alternative, Deviations and Exceptions to the Provisions)

Bidder’s Name and Address : To:

Contract Services

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 RHQ, Plot No 54 Vadodara-390008

The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Annexure I toAttachment-6

(Alternative, Deviations and Exceptions to the Provisions)

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-7

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Details of Alternative Bid)

Bidder’s Name and Address : To:

Contract Services

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 RHQ, Plot No 54 Vadodara-390008

This Attachment is Not Applicable

No Alternative Bid

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Work Completion Schedule)

Bidder’s Name and Address : To:

Contract Services

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 RHQ, Plot No 54 Vadodara-390008

This Attachment is Not Applicable

We hereby declare that the following Work Completion Schedule shall be followed by us in furnishing and installation of the subject Package i.e., Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2 for the period commencing from the effective date of Contract to us :

Sl. No. Description of Work Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

1 Detailed Engineering and drawing submission

a) commencement

2 Procurement of equipment/ components & assembly

a) commencement

a) commencement

3 Manufacturing

a) commencement

4 Shipments & Delivery

a) commencement

5 Establishment of site office

6 Installation at Site

a) commencement

7 Testing & Pre-commissioning

a) commencement

8 Trial Operation

a) commencement

Date : -- Printed Name :

Place : Designation :

Note : Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise.

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-10

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Guarantee Declaration)

Bidder’s Name and Address : To:

Contract Services

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 RHQ, Plot No 54 Vadodara-390008

Dear Sir, We conform that the equipments offerred shall have minimum performance specified in Technical Specification. We further guarantee the performance/efficiency of the equipments in response to the Technical Specifications.

Date -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-11

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Information regarding Ex-employees of POWERGRID in our Organisation)

Bidder’s Name and Address : To:

Contract Services

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 RHQ, Plot No 54 Vadodara-390008

We declare that we are aware of and have gone through the “Code of Business Conduct and Ethics for Senior Management Personnel”1 and “Code of Business Conduct and Ethics for Board Members”1 of POWERGRID (hereinafter referred to as the “Code of Conduct”). We further understand that as per the “Code of Conduct”, Senior Management Personnel including Board Members, who have retired/resigned from POWERGRID, shall not accept any appointment or post, as detailed in the referred “Code of Conduct”, within 1 year from the date of cessation of service/directorship unless approved by the Competent Authority. Accordingly, we hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation*

*In case the date of joining in the bidder’s organization of such ex-employee is within 1 year from the date of retirement/resignation from POWERGRID, No Objection Certificate/ approval from the Competent Authority must be furnished along with the bid or subsequent through clarification pursuant to ITB Clause 21.

In case of non-submission of No Objection Certificate/approval of the Competent Authority, as required, We understand that POWERGRID shall deal with such cases as per its Policy and procedures in vogue, which may also result in rejection of our bid. We also confirm that POWERGRID shall be the sole judge in this regard. We further declare that any misrepresentation or submission of false/forged documents/information in this regard shall be dealt with as per the provisions of the Integrity Pact and/or the Bidding Documents and/or POWERGRID’s policy and procedures.

Date : -- Printed Name :

Place : Designation :

Note: 1. “Code of Business Conduct and Ethics for Senior Management Personnel” and “Code of Business Conduct and Ethics for Board Members” are available on POWERGRID’s website https://www.powergridindia.com. 2. The information in similar format should be furnished for each partner of joint venture in case of joint venture bid. 3. In case bidder has furnished no details on ex-employees of POWERGRID or has left blank or has indicated ‘-‘ against the same, it shall be deemed that they have not employed any such person in their organization.

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-11

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Information regarding Ex-employees of POWERGRID in our Organisation)

Name(s) and Addresse(s) of other partner(s) To:

Contract Services

Name : Ram Lal Power Grid Corporation of India Ltd.,

Address : G5 Western Region Transmission System-II

Gurgaon RHQ, Plot No 54 Vadodara-390008

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-11

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Information regarding Ex-employees of POWERGRID in our Organisation)

Name(s) and Addresse(s) of other partner(s) To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : Western Region Transmission System-II

RHQ, Plot No 54 Vadodara-390008

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : -- Printed Name :

Place : Designation :

Specification No.: WR2/NT/W-CIVIL/DOM/G01/25/05179 ATTACHMENT-12

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Price Adjustment Data)

Bidder’s Name and Address (Sole Bidder) : To:

0 Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : Western Region Transmission System-II

RHQ, Plot No 54 Vadodara-390008

We have quoted our bid price on firm/fixed price basis

Sl. No. Name of Materials/Labour Value of co-efficient Name of the published index Value of index as 30 days prior to date set for opening of bids

In accordance with Clause 2, Appendix-2, Form of Contract Agreement, Section-VI; Forms. Volume-I

A) For Equipment Ex-Works Price Component

I. Circuit Breaker

a) Raw Material

b) Labour I= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.

II Current Transformer

a) Raw Material

b) Labour I= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.

a) Raw Material

b) Labour I= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

The sum of the value of coefficients for raw materials: a+b+c+d=0.65 to 0.73 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.

II Insulating Oil

S.N. Name of Materials/Labour Value of Coefficient Name of the published index Value of index as 30 days prior to date set for opening of bids

III Capacitive VoltageTransformer

a) Raw Material

b) Labour I= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.

a) Raw Material

b) Labour I= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.

IV Surge Arrester

a) Raw Material

b) Labour I= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.

V PVC/XLPE Insulated Power and Control Cable

a) a=PVC Compound 0.15

b) Published Price of Metal IEEMA

i) Aluminium per MT IEEMA

ii) Copper per MT IEEMA

c) Weight in MT of Metal per kM (Size wise)

VI Substation Structures

i) Lattice Steel Structures & Pipe Structures (including bolts & nuts, washers & foundation bolts)

a) Raw Materials

i) a=Structural steel 0.58 JPC Market Price (Retail) for average Price of Steel Angles of size 50 x 50 x 6 mm of all cities in Rs./MT as published by Joint Plant Committee(JPC).

ii) b=Electrolytic Zinc 0.16 IEEMA

b) Labour 0.11 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

VIII. Series Reactor [ 420 kV, 12 ohm, 2500A, 1-ph air core dry type Series Reactor]

a) Raw Material Copper(a)

i) Aluminium(a) Aluminium(a)

b) Labour I= 0.85 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

The value of coefficient for raw materials: a=0.65 to 0.73 and value of coefficient for labour shall be between 0.12 and 0.20, so that sum of all the coefficients including labour shall be a+l=0.85

B. For Installation Price Component

I Installation price component (including Civil works but excluding ‘supply & placement of reinforcement steel’ and ‘concreting’)

i) Labour I= 0.80 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

II Supply & Placement of Reinforcement Steel

i) HSD 0.10 Wholesale Price Index Number for `HSD’(Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).

ii) Labour I= 0.05 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

iii) Manufacture of Basic Metals 0.65 Wholesale Price Index Number for `Manufacture of Basic Metals’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).

III For Concereting

i) HSD 0.20 Wholesale Price Index Number for `HSD’(Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).

ii) Labour I= 0.10 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

iii) Manufacture of cement, lime and plaster 0.30 Wholesale Price Index Number for `Manufacture of cement, lime and plaster’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in)

iv) Cutting, shaping and finishing of stone 0.20 Wholesale Price Index Number for `Cutting, shaping and finishing of stone’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).

The Bidders are required to estimate and indicate the values of different coefficients for each of the items in the price variation formulae within the specified range such that their summation is as specified in the Bidding Documents. Where no value or ‘-’ or ‘shall be furnished later’ is specified against the coefficient, the same will be deemed to be zero and the fixed component would be suitably adjusted. If the values of all coefficients in price variation formulae indicated by the Bidder are within the specified range but their sum exceeds the summation specified in the Bidding Documents, the values of the coefficients shall be pro-rata adjusted such that the summation remains as per the provisions of the Bidding Documents. If the values of all coefficients indicated by the Bidder are within the specified range but their summation is less than the value specified in the Bidding Documents, the values of the coefficients as indicated by the Bidder shall be considered as such and the fixed component in the price variation formulae would be suitably adjusted. Further, if any of values of the coefficients indicated by the Bidder is out of the range specified in the Bidding Documents, the lower of the values, as indicated by the Bidder vis-à-vis lower value of the range for that coefficient specified in the Bidding Documents, shall be considered and the fixed component would be suitably adjusted.

Date : Printed Name : 0

Place : 0 Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 ATTACHMENT-12

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Price Adjustment Data)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 "Saudamini", Plot No.-2

0 Gurgaon (Haryana) - 122001

We hereby furnish the relevant details pertaining to the price adjustment provisions for equipment as specified in your specifications and documents for the subject package. The necessary documentary evidence is enclosed.

Sl. No. Name of Materials/Labour Value of co-efficient Name of the published index Value of index as 30 days prior to date set for opening of bids

In accordance with Clause 2, Appendix-2, Form of Contract Agreement, Section-VI; Forms. Volume-I

A. Price Adjustment for Erection Price Component

1 Erection price component {including Civil Works but excluding ‘Supply & Placement of reinforcement steel’ and ‘Concreting’}

i) High Speed Diesel, coefficient a = Wholesale Price Index Number for `HSD’ (Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in)

ii) Labour, coefficient l = Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in)

Coefficient ‘a’ shall be between 0.20 to 0.24 and Coefficient ‘l’ shall be between 0.56 to 0.60 and sum of Coefficients ‘a’ and ‘l’ shall be 0.80

2 Supply and placement of reinforcement steel

i) HSD, a= Wholesale Price Index Number for `HSD’ (Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in)

ii) Labour, l= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

iii) Manufacture of Basic Metals, b= Wholesale Price Index Number for `Manufacture of Basic Metals’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).

Coefficient ‘a’ shall be between 0.09 to 0.11, Coefficient ‘b’ shall be between 0.63 to 0.67 and coefficient ‘l’ shall be between 0.04 to 0.06 and sum of Coefficients ‘a’, ‘b’ and ‘l’ shall be 0.80

3 For Concereting

i) HSD, a= Wholesale Price Index Number for `HSD’(Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in)

ii) Labour, l= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

iii) Manufacture of cement, lime and plaster, b= Wholesale Price Index Number for `Manufacture of cement, lime and plaster’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in)

iv) Cutting, shaping and finishing of stone, c= Wholesale Price Index Number for `Cutting, shaping and finishing of stone’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).

Coefficient ‘a’ shall be between 0.18 to 0.22, Coefficient ‘b’ shall be between 0.25 to 0.35, Coefficient ‘c’ shall be between 0.18 to 0.22 and Coefficient ‘l’ shall be between 0.09 to 0.11 and sum of Coefficients ‘a’, ‘b’, ‘c’ and ‘l’ shall be 0.80

The Bidders are required to estimate and indicate the values of different coefficients for each of the items in the price variation formulae within the specified range such that their summation is as specified in the Bidding Documents. Where no value or ‘-’ or ‘shall be furnished later’ is specified against the coefficient, the same will be deemed to be zero and the fixed component would be suitably adjusted. If the values of all coefficients in price variation formulae indicated by the Bidder are within the specified range but their sum exceeds the summation specified in the Bidding Documents, the values of the coefficients shall be pro-rata adjusted such that the summation remains as per the provisions of the Bidding Documents. If the values of all coefficients indicated by the Bidder are within the specified range but their summation is less than the value specified in the Bidding Documents, the values of the coefficients as indicated by the Bidder shall be considered as such and the fixed component in the price variation formulae would be suitably adjusted. Further, if any of values of the coefficients indicated by the Bidder is out of the range specified in the Bidding Documents, the lower of the values, as indicated by the Bidder vis-à-vis lower value of the range for that coefficient specified in the Bidding Documents, shall be considered and the fixed component would be suitably adjusted.

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-13

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Declaration regarding Social Accountability)

Bidder’s Name and Address : To:

Contract Services

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 RHQ, Plot No 54 Vadodara-390008

We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-14

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

Bidder’s Name and Address : To:

Contract Services

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 RHQ, Plot No 54 Vadodara-390008

Integrity Pact is annexed herewith this Volume.

Date : -- Printed Name :

Place : Designation :

Instruction for printing & submitting Integrity Pact

1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

Power Grid Corporation of India Limited

having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as

Individual Firm

hereinafter referred to as

"The Bidder/Contractor"

POWERGRID intends to award, under laid-down organisational procedures, contract(s) for Tower Package (Package-P238-TW05 ) for 765kV S/C (100 km.) & 765 kV D/C (62 km.) Gwalior-Jaipur Transmission Line (Part-I) associated with Phase-I Generation Projects in Orissa (Part -C)

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 1 of 8

In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.

It is hereby agreed by and between the parties as unde r:

Section I - Commitments of POWERGRID

(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :

a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.

b) POWERGRID will, during the tender process treat all Bidder(s) with equity and fairness. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.

c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personnel interest in the Companies/Agencies participating in the Bidding/Tendering process.

(2) If Chairman and Managing Director obtains information on the conduct of any employee of POWERGRID which is a criminal offence under the relevant Anti-Corruption Laws of India, or if there be a substantive suspicion in this regard, he will inform its Chief Vigilance Officer and in addition can initiate disciplinary actions under its Rules.

Section II - Commitments of the Bidder/Contractor

(1) The Bidder/Contractor commits himself to take all measures necessary to prevent corruption. He commits himself to observe the following principles during his participation in the tender process and during the contract execution :

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 2 of 8

a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to POWERGRID, or to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which he/she is not legally entitled to, in order to obtain in exchange an advantage during the tender process or the execution of the contract.

b) The Bidder/Contractor will not enter into any illegal agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.

c) The Bidder/Contractor will not commit any criminal offence under the relevant Anti-corruption Laws of India; further, the Bidder/Contractor will not use for illegitimate purposes or for purposes of restrictive competition or personal gain, or pass on to others, any information provided by POWERGRID as part of the business relationship, regarding plans, technical proposals and business details, including information contained or transmitted electronically.

d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.

e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments he has made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.

f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/informations in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.

(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 3 of 8

Section III- Disqualification from tender process and exclusion from future contracts

(1) If the Bidder, before contract award, has committed a serious transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.

(2) If the Bidder/Contractor has committed a serious transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may after following due procedures also exclude the Bidder/Contractor from future contract award processes. The imposition and duration of the exclusion will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The exclusion will be imposed for a minimum of 12 months and maximum of 3 years.

(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the exclusion prematurely.

Section IV - Liability for violation of Integrity Pact

(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID may forfeit the Bid Guarantee under the Bid.

(2) If POWERGRID has terminated the contract under Section III, POWERGRID may forfeit the Contract Performance Guarantee of this contract besides resorting to other remedies under the contract.

Section V- Previous Transgression

(1) The Bidder shall declare in his Bid that no previous transgressions occurred in the last 3 years with any other Public Sector Undertaking or Government Department that could justify his exclusion from the tender process.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 4 of 8

(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason.

Section VI - Equal treatment to all Bidders / Contractors

(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.

(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.

Section VII - Punitive Action against violating Bidders / Contractors

If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or his subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).

(*)Section VIII - Independent External Monitor/Monitors

(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India, out of which one of the IEMs has been indicated in the NIT/IFB.

(2) The IEM is to review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. He has right of access to all project documentation. The IEM may examine any complaint received by him and submit a report to Chairman-cum-Managing Director, POWERGRID, at the earliest. He may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act. However, for ensuring the desired transparency and objectivity in dealing with the complaints arising out of any tendering process, the matter shall be referred to the full panel of IEMs, who would examine the records, conduct the investigations and submit report to Chairman-cum-Managing Director, POWERGRID, giving joint findings.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 5 of 8

(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He reports to the Chairman-cum-Managing Director, POWERGRID.

(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his request and demonstration of a valid interest, unrestricted and unconditional access to his documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.

(5) POWERGRID will provide to the IEM information as sought by him which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract.

(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.

(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.

(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under relevant Anti-Corruption Laws of India, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 6 of 8

(9) The word ‘IEM’ would include both singular and plural.

(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.

Section IX - Pact Duration

This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.

Section X - Other Provisions

(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration/Conciliation clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.

(2) Changes and supplements as well as termination notices need to be made in writing.

(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.

(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).

(5) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral/conciliation or judicial proceedings (arising out of the arbitral/conciliation proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.

# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 7 of 8

(6) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.

Signature Signature

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

(Office Seal) (Office Seal)

Designation : #REF!

Witness 1 : Witness 1 :

Designation : Designation :

Witness 1 : Witness 1 :

Designation : Designation :

Integrity Pact Page 8 of 8

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-15

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise

Bidder’s Name and Address : To:

Contract Services

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 RHQ, Plot No 54 Vadodara-390008

I We have read the provisions in the Bidding Documents regarding furnishing the option for advance payment. Accordingly, as per ITB Clause 9.3 as provided in Section BDS, Section III, Vol.-I of the Bidding Documents, we hereby confirm to opt the following:

Interest Bearing Initial Advance

Supply Portion:

Services Portion:

I We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.

1. Name of the Supplier/ Contractor in whose favour payment is to be made 0

2. Address with PIN Code and State

Registered Office:

Correspondence Address:

3. (a) Status – Company/others

[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]

3. (b) Are you a MSE owned by SC/ST* entrepreneurs in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012 including subsequent amendment/notification/order (Indicate Yes/No) Note: Documentary evidence is to be attached. Please refer remarks at the end of the attachment. No

3. (c ) If 3(b) is ‘Yes’ please mention whether you are (Proprietary MSE/ Partnership MSE/ Private Limited Company) owned by SC/ST entrepreneurs

3. (d ) Are you a MSE owned by women in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012, Public Procurement Policy for Micro and Small Enterprises (MSEs) Amendment order 2018 including subsequent amendment/notification/order (Indicate Yes/No) Note: Documentary evidence is to be attached.

4. Permanent Account (PAN) No.

5. GSTIN Numbers

I. GSTIN in the Sates/UT from where the supply of goods take place

Name of the States/UT GSTIN number

II. GSTIN in the States/UT where the supply for services take place (states where sites under the subject package is situated)

Name of the States/UT GSTIN number

6 PF Registration No. of the Company

7 PF Regional Office covered (with Address)

8 Name of Contact Person

9 Contact Details

10 Bank Details for Electronic Payment

Name of the Bank:

Address of Branch:

Type of Account:

Type of Account: Current Account

11 9 digit MICR code printed at bottom in middle, next to cheque no.

12 IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed

We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.

*The definition of MSEs owned by SC/ST is as given under:

a. In case of proprietary MSE, proprietor(s) shall be SC /ST.

b. In case of partnership MSE, the SC/ST partners shall be holding at least 51% shares in the unit.

c. In case of Private Limited companies, at least 51% share shall be held by SC/ST promoters.

Documentary evidence: Please provide scanned copy(ies) of the SC/ST certificate(s) issued by District Authority as applicable for SC/ST MSE category as per (a), (b) or (c) above.

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-16

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Additional Information)

Bidder’s Name and Address : To:

Contract Services

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 RHQ, Plot No 54 Vadodara-390008

In support of the additional information required as per ITB Sub-Clause 9.3 (q) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):

1.0 The Bidder shall furnish

A certificate from their Banker(s) (as per prescribed formats in Form 16, Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers. [Reference ITB clause 9.3(q)(i)]

1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:

Name of the Bidder (Sole Bidder) 0

Name of the Banker by whom certificate issued

Date of certificate (should not be earlier than 3 months prior to date of bid opening)

Whether fund based/non fund based limits are indicated in the certificate

Whether extent of utilization is indicated in the certificate

1.2 The Bidder should accordingly also provide the following information/documents

(i) Details of Banker:

Address of Banker

Contact Name and Title

(ii) As per para 1.0, Authorization Letter(s) from the bidder (in case of JV bidder, from all the partners) addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:

Sl. No. Letter Ref. Date Addressed to (name of the Bank)

(iii) As per para BDS/ITB clause 9.3q, Bidder shall furnish the details of their Provident Fund Code Number

Sl. No. Name of Bidders/JV Partners Provident Fund Code Number Details

2.0 Litigation History

The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid. [Reference ITB clause 9.3(q)(ii)]

2.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years

Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount

3.0 Details regarding previous transgressions of Integrity Pact

The bidder should provide detailed information on any transgression of Integrity Pact that occurred in the last 10 years with any other Public Sector Undertaking or Government Department or any other Company, in any country.

3.1 Details regarding previous transgressions of Integrity Pact that occurred in the last 10 years

Year Name of client Details of Transgression of Integrity Pact by the bidder

4.0 OTHER INFORMATION

4.1 Current Contract Commitments of works in progress

Bidders (individual firms or each partners of JV) should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.

Details of Contract Value of outstanding work (Rs.) Estimated completion date

4.2 Financial Data:

Details Actual (Previous five years) Projection for next five years

Total Liability

Current Liability

Profit before taxes

Profit after taxes

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-17

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Declaration for tax exemptions, reductions, allowances or benefits)

Bidder’s Name and Address : To:

Contract Services

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 RHQ, Plot No 54 Vadodara-390008

1 We confirm that we are solely responsible for obtaining following tax exemptions, reductions, allowances or benefits in respect of supplies under the subject package, in case of award. We further confirm that we have considered the same in our bid thereby passing on the benefit to POWERGRID while quoting our prices. In case of our failure to receive such benefits, partly or fully, for any reason whatsoever, the Employer will not compensate us.

2 We are furnishing the following information required by the Employer for issue of requisite certificate if and as permitted in terms of the applicable Govt. of India policies/procedures (in case of award):

Applicable Act, Notification No. and Clause Ref. No. Sl. No. Description of item on which applicable Country of origin Remarks, if any

(The requirements listed above are as per current Notification of Govt. of India indicated above. These may be modified, if necessary, in terms of the Notifications.)

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-17

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Information regarding Ex-employees of POWERGRID in our Organisation)

Name(s) and Addresse(s) of other partner(s) To:

Contract Services

Name : …… ……. …….. …… ……. …….. Power Grid Corporation of India Ltd.,

Address : …… ……. …….. …… ……. …….. Western Region Transmission System-II

…… ……. …….. …… ……. …….. RHQ, Plot No 54 Vadodara-390008

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-17

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

(Information regarding Ex-employees of POWERGRID in our Organisation)

Name(s) and Addresse(s) of other partner(s) To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : Western Region Transmission System-II

RHQ, Plot No 54 Vadodara-390008

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Attachment-19

Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2

Bidder’s Name and Address : To:

Contract Services

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Western Region Transmission System-II

0 RHQ, Plot No 54 Vadodara-390008

Further, we hereby confirm that except as mentioned in the Attachment – 6 (Alternative, Deviations and Exceptions to the Provisions) hereof forming part of our First Envelope :

Date : -- Printed Name :

Place : Designation :

Specification No. :WR2/NT/W-CIVIL/DOM/G01/25/05179 Bid Form 1st Envelope 1 one 1 st 1 January

2 two 2 nd 2 February

BID FORM (First Envelope) 3 three 3 rd 3 March

4 four 4 th 4 April

Bid Proposal Ref. No. 5 five 5 th 5 May

Date : -- 6 six 6 th #VALUE! 6 June

7 seven 7 th #VALUE! 7 July

To: 8 eight 8 th #VALUE! 8 August

Contract Services 9 nine 9 th #VALUE! 9 September

Power Grid Corporation of India Ltd., 10 ten 10 th 10 October

Western Region Transmission System-II 11 eleven 11 th 11 November

RHQ, Plot No 54 Vadodara-390008 12 twelve 12 th 12 December

13 thirteen 13 th

14 fourteen 14 th

Name of Contract : Supply & Installation of Pre-Fabricated Dwellings for Skill Development Centre at 400/220 kV Rajgarh Sub-Station under CSR in WR-2 15 fifteen 15 th

Dear Ladies and/or Gentlemen, Enter details here. 16 sixteen 16 th

1.0 Having examined the Bidding Documents, including Amendment Nos. dated …[Enter the Date in dd-mm-yyyy]… the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). …[Enter the Date in dd-mm-yyyy]… the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). 17 seventeen 17 th

1.1 We meet the eligibility requirements and have no conflict of interest in accordance with ITB Clause 2.

2.0 Attachments to the Bid Form (First Envelope) Bank Draft 18 eighteen 18 th

In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments: Pay Order 19 nineteen 19 th

(a) Attachment 1(Supply and Installation Package Rfx: 5002004410) : BID SECURITY FORM in Volume I Annexure E (BDS) Banks certified Cheque Zero 20 twenty 20 th

or documentary evidence in support of exemption of Bid Security, in separate envelope in accordance with clause 21 of ITB, Section-II." Please note that if bid validity is less than 250 days, your bid may be rejected

(b) Attachment 2(Supply and Installation Package Rfx: 5002004410) : A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 14. Bank Guarantee (0) 21 st

*Further the requisite deed of Joint Undertaking as per stipulated qualification requirement in Annexure-A (BDS) has also been furnished as per your format.

* Delete if not applicable

(c) Attachment 3(Supply and Installation Package Rfx: 5002004410) : The documentary evidence that we are eligible to bid in accordance with ITB Clause 2. Further, in terms of ITB Clause 9.3(c) & (e), the qualification data has been furnished as per your format enclosed with the bidding documents [Attachment – 3(QR)]. 22 th

Further, the required Joint Venture Agreement signed by us and our Partners has also been furnished as per your format Attachment-3(JV). #REF! Applicable 23 th

Further the required deed of Joint Undertaking signed by us and Tower Manufacturer has also been furnished as per your format. 0 #REF! Not Applicable 24 th

(d) Attachment 4(Supply and Installation Package Rfx: 5002004410) : The documentary evidence establishing in accordance with ITB Clause 3, Vol.-I of the Bidding Documents that the facilities offered by us are eligible facilities and conform to the Bidding Documents has been furnished as Attachment 4. A list of Special Tools & Tackles to be used by us for erection, testing & Commissioning and to be handed over to Employer, the cost of which is included is our Bid Price, is also enclosed as per your format as Attachment 4A. A list of Special Tools & Tackles to be brought by the contractor for erection, testing & Commissioning and to be taken back after completion of work, whose cost in not included in our bid price, is enclosed as per your format as Attachment 4B. 25 th

(e) Attachment 5(Supply and Installation Package Rfx: 5002004410) : NA 26 th

(f) Attachment 5A(Supply and Installation Package Rfx: 5002004410) : NA 26 th

(g) Attachment 6(Supply and Installation Package Rfx: 5002004410) : The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings (excluding critical provisions as mentioned at clause 6.0 below) in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein. 27 th

(h) Attachment 7(Supply and Installation Package Rfx: 5002004410) : NA 28 th

(i) Attachment 8(Supply and Installation Package Rfx: 5002004410) : NA 29 th

(j) Attachment 9(Supply and Installation Package Rfx: 5002004410) : NA 30 th

(k) Attachment 10(Supply and Installation Package Rfx: 5002004410) : Guarantee Declaration. 31 st

(l) Attachment 11(Supply and Installation Package Rfx: 5002004410) : Information regarding ex-employees of Employer in our firm.

(m) Attachment 12(Supply and Installation Package Rfx: 5002004410) : Filled up information regarding Price Adjustment Data as per the format enclosed in the bidding documents.

(n) Attachment 13(Supply and Installation Package Rfx: 5002004410) : Declaration regarding Social Accountability.

(o) Attachment 14(Supply and Installation Package Rfx: 5002004410) : Integrity Pact, in a separate envelope, duly signed on each page by the person signing the bid.

(p) Attachment 15(Supply and Installation Package Rfx: 5002004410) : Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise

(q) Attachment 16(Supply and Installation Package Rfx: 5002004410) : Additional Information.

(r) Attachment 17(Supply and Installation Package Rfx: 5002004410) : Declaration for tax exemptions, reductions, allowances or benefits

(s) Attachment 18(Supply and Installation Package Rfx: 5002004410) : NA

(t) Attachment 19(Supply and Installation Package Rfx: 5002004410) : Declaration.

(u) Attachment 20(Supply and Installation Package Rfx: 5002004410) : Declaration of Key Managerial Person jointly with Power of Attorney holder

(v) Attachment 21(Supply and Installation Package Rfx: 5002004410) : Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII order and MoP Order, if applicable

(w) Attachment 22(Supply and Installation Package Rfx: 5002004410) : NA

(x) Attachment 23(Supply and Installation Package Rfx: 5002004410) : NA

(y) Attachment 24(Supply and Installation Package Rfx: 5002004410) : NA

(z) Attachment 25(Supply and Installation Package Rfx: 5002004410) : Compliance to the process related to the e-RA Terms & Conditions and the Business Rules governing the e-RA

(aa) Attachment 26(Supply and Installation Package Rfx: 5002004410) : Declaration by the Bidder regarding events encountered pursuant to ITB Clause 2.1

(ab) Attachment 27(Supply and Installation Package Rfx: 5002004410) : Certification by the Bidder per DoE Order in line with ITB Clause 2.1

(ac) Attachment 28(Supply and Installation Package Rfx: 5002004410) : NA

3.0 We are aware that, in line with Clause No. 27.1 (ITB), our Second Envelope (Price Part) is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in this First Envelope.

4.0 We confirm that except as otherwise specifically provided our Bid Prices in Second Envelope include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

4.1 100% of applicable Taxes and Duties i.e. GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.

4.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

5.0 Construction of the Contract

5.1 We declare that we have studied Clause GCC 2.1 relating to mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us two separate Contracts viz ‘First Contract’ for ex-works supply of all equipment and materials including mandatory spares and ‘Second Contract’ for providing all the services i.e. inland transportation for delivery at site, In-transit insurance, unloading, handling at site, installation, testing and commissioning including Trial operation in respect of all the equipment supplied under the ‘First Contract’ and other services specified in the Contract Documents. We declare that the award of two contracts, will not, in any way, dilute our responsibility for successful operation of plant/equipment and fulfillment of all obligations as per Bidding Documents and that both the Contracts will have a cross-fall breach clause i.e. a breach in one Contract will automatically be classified as a breach of the other contract which will confer on you the right to terminate the other contract at our risk and cost.

6.0 We have read the provisions of following clauses and confirm that the specified stipulations of these clauses are acceptable to us:

(a) ITB 13 Bid Security

(b) GCC 2.14 Governing Law

(c) GCC 5.1 Contractor’s Responsibilities

(d) Appendix I to SCC Terms of Payment

(e) GCC 8.3 Performance Security

(f) GCC 6 Taxes and Duties

(g) GCC 40 Defect Liability

(h) GCC 59 Arbitration

(i) GCC 60 Conciliation

(j) Appendix 2 to SCC Price Adjustment

Further we understand that deviation taken in any of the above clauses by us may make our bid non-responsive as per provision of bidding documents and be rejected by you.

7.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification of Award to us, and to achieve the delivery of goods and related services within the time stated in the Bidding Documents.

8.0 If our bid is accepted, we undertake to provide a Performance Security in the form and amounts, and within the times specified in the Bidding Documents.

9.0 We agree to abide by this bid for a period of six (06) months from the date fixed for opening of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period.

10.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.

11.0 We understand that you are not bound to accept the lowest or any bid you may receive.

12.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions. 2

13.0 We are a Micro and Small Enterprise (MSE) registered with , a designated Authority of GoI under the Public Procurement Policy for MSEs order 2012, Notification dated 01/06/2020 and 26/06/2020 read in conjuction with related notifications issued from time to time for such enterprises. 2

14.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of 0

Date : -- Printed Name :

Place : Designation :

In case of bid from a Joint Venture, name & designation of representative of JV partner is to be provided and Bid Form is also to be signed by him

#REF! Printed Name :

#REF! Designation :

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred