MAINTENANCE / REPAIRS AND RECANNING TO CERTAIN WOODEN AND STEEL FURNITURE AT AFS BIDAR

Amount

TABLE WRITING :- FD- 249 / 275. Removing unserviceable leg from table and S&F new leg of table writing, made out of seasoned first class hard wood teak, complete all as shown on drawing and as specified and directed. Note:- Each leg shall be measured as one unit.

Removing the unserviceable top long rail from table and S&F new top long rail, made out of seasoned first class hard wood teak complete all as shown on drawing and as specified and as directed. Note:- Each long rail shall be measured as one unit.

Removing the unserviceable top short rail from table and S&F new top short rail , made out of seasoned first class hard wood teak complete all as shown on drawing and specified and as directed. Note:- Each short rail shall be measured as one unit.

Removing the unserviceable stiffner from table and S&F new stiffner made out of seasoned first class hard wood teak complete all as shown on drawing and as specified and as directed.

Removing the unserviceable top from table, tightining of frame and S&F new top with 18mm thick prelaminated particle board with one side laminated face and other side balancing white, ISI Marked, exterior grade, including teak wood edge beading 6mm thick complete, all as shown on drawing and as specified and directed.

Removing the unserviceable drawer from table and S&F new drawer made to shape and size, front / Back and both side of the drawer with 18mm thick seasoned first class hard wood (teak) complete all as shown on drawing and as specified and as directed. Note:- Each Drawer shall be measured as one unit.

Removing the unserviceable prelaminated particle board and S&F 18mm thick prelaminated particle board, for sides of Drawer compartment of table writing complete all as shown on drawing and as specified and as directed. Note : Each side shall be measured as one unit.

Removing the unserviceable plywood and S&F 6mm thick BWR ply wood duly ISI marked to rear of Drawer cabinet of table writing complete all as shown on drawing and as specified and as directed.

Removing the unserviceable shutter from table and providing new shutter made out of 18mm thick prelaminated particle board, ISI Marked, exterior grade, with one side laminated face and other side balancing white, including edge beading of 4mm thick teak wood, fixed with 18" long MS bright piano type hinges and one knob, standard quality, etc., complete all as shown on drawing and as specified and as directed. Note:- Each shutter shall be measured as one unit.

TABLE DINING 6 PERSONS FD- 273/ 239/ 269 Removing the existing unserviceable damaged top, tightning of the frame, S&F top with a new prelaminated particle board 18mm thick, ISI marked with one side laminated face and other side balancing white, exterior grade, including 4mm thick teak wood edging, alround, etc complete, all as specified and shown on drgs.

Removing unserviceable leg from table dinning 6 persons and S&F new leg of existing size and shape, made out of well seasoned first class hard wood teak , complete all as shown on drawing and as specified and as directed. Note: Each leg will be measured as one unit.

Removing unserviceable long rail from table dinning 6 persons and S&F new long rail of existing size and shape, made out of first class hard wood, well seasoned teak, complete, all as specified and shown on drg and as directed. Note:- Each long rail shall be measured as one unit.

All as per Item No.2.02 above, but short rail. Note:- Each short rail shall be measured as one unit.

Removing unserviceable wooden corner bracket from table dinning 6 persons and S&F new bracket of existing size and shape, made out of well seasoned first class hard wood, teak, complete, all as specified and shown on drg and as directed. Note:- Each bracket shall be measured as one unit.

TABLE CENTRE FD-274 Removing the existing unserviceable table top, tightning of the frame, S&F new top of prelaminated particle board 18mm thick, ISI marked , exterior grade, with laminated face on one side and balancing white on other face, including 4mm thick teak wood edging all round, complete all as shown on drawing and as specified and as directed.

Removing unserviceable leg from table and S&F new leg of existing size and shape, made out of well seasoned first class hard wood teak complete all as shown on drawing and as specified and as directed. Note: Each leg will be measured as one unit.

Removing unserviceable long rail from table and S&F new long rail of existing size and shape, made out of well seasoned first class hard wood teak complete all as shown on drawing and as specified and as directed. Note: Each rail will be measured as one unit.

All as per Item No. 3.02 here in before but short rail. Note: Each rail will be measured as one unit.

TEAPOY FD-278/382 Removing the existing unserviceable top from teapoy, tightning the frame, S&F new top of prelaminated particle board 18mm thick, ISI marked, exterior grade, with laminated face on one side and balancing white on other side, including 4mm thick teak wood edging all round, complete all as shown on drawing and as specified and as directed.

Removing unserviceable leg from teapoy and S&F new leg of existing size and shape, made out of well seasoned first class hard wood teak complete, all as specified and shown on drg and as directed. Note: Each leg will be measured as one unit.

Removing unserviceable long rail from teapoy and S&F new long rail of existing size and shape, made out of well seasoned first class hard wood teak complete, all as specified and shown on drg and as directed. Note: Each rail will be measured as one unit.

All as per Item No. 4.02 here in before but, short rail. Note: Each rail will be measured as one unit.

DRESSING TABLE LADIES FD- 251/ 32 Removal of unserviceable/broken mirror and S & F of new mirror of size complete all as shown on drawing and as specified and as directed.

Removal of unserviceable plywood and S & F of new ply wood 6mm thick BWR type, for back of mirror complete all as shown on drawing and as specified and as directed.

Removal of unserviceable back stiffner of mirror and S & F of new back stiffner of existing shape and size, made out of seasoned first class hard wood teak, complete all as shown on drawing and as specified and as directed. Note:- Each stiffner shall be measured as one unit.

Removal of unserviceable frame of mirror and S & F of new frame of mirror made out of seasoned, first class hard wood teak, complete, all as specified and as shown on drg and as directed.

Removal of unserviceable drawer and S & F of new drawer of prelaminated particle board, 18mm thick, ISI marked, exterior grade, with one side laminating face and other side balacing white, including 6mm thick teak wood edging alround, duly fitted with 1 No. Knob, etc complete all as specified and shown on drgs, Note:- Each drawer shall be measured as one unit.

Removal of unserviceable / broken plain glass pane and S & F new plain glass pane 6mm thick, etc complete all as specified and as shown on drg.

PEG TABLE FD-277/ 236/ 25/ 384 Removing the existing unserviceable top from peg table, tightning of the frame, S&F new top of prelaminated particle board 18mm thick ISI marked, exterior grade, with one side laminated face and other side balancing white, including 6mm thick teak wood edging alround, complete all as shown on drawing and as specified and as directed.

Removing unserviceable leg from peg table and S&F new leg of existing size and shape, made out of well seasoned first class hard wood teak, complete all as shown on drawing and as specified and as directed. Note: Each leg will be measured as one unit.

Removing unserviceable long rail from peg table and S&F new long rail of existing size and shape made out of well seasoned first class hard wood, teak, complete all as shown on drawing and as specified and as directed. Note: Each long rail will be measured as one unit.

All as per Item No 6.02 here in before but short rail. Note: Each short rail will be measured as one unit.

CHAIR EASY : FD-229 Removing the unserviceable front leg and S&F new leg of existing size and shape made out of well seasoned first class hard wood teak complete all as shown on drawing and as specified and as directed. Note: Each leg will be measured as one unit.

All as per item No. 7.00 here in before but rear leg. Note: Each leg will be measured as one unit.

Removing the unserviceable side rail of seat frame and S&F new side rail of existing size and shape made out of well seasoned first class hard wood teak, complete all as shown on drawing and as specified and as directed. Note: Each leg will be measured as one unit. Note: Each rail will be measured as one unit.

All as per item No. 7.02 here in before but front rail of seat frame. Note: Each rail will be measured as one unit

All as per item No.7.02 here in before but back rail of seat frame. Note: Each rail will be measured as one unit.

Removing the unserviceable top horizontal rail of the back rest frame and S&F new rail of existing size and shape made out of well seasoned first class hard wood teak, complete all as shown on drawing and as specified and as directed. Note: Each rail will be measured as one unit.

All as per item No. 7.05 here in before but bottom horizontal rail of back rest frame. Note: Each rail will be measured as one unit.

All as per item No. 7.05 here in before but side rail of back rest frame. Note: Each rail will be measured as one unit.

Removing the unserviceable arm rest and S&F new arm rest of existing size and shape made out of well seasoned first class hard wood teak, complete all as shown on drawing and as specified and as directed. Note: Each arm rest will be measured as one unit.

CHAIR DINING :- FD-273/ 16/ 203/ 209 Removing the unserviceable front leg and S&F new leg of existing size and shape made out of well seasoned first class hard wood teak, complete all as shown on drawing and as specified and as directed. Note: Each leg will be measured as one unit.

All as per item No. 8.00 here in before but back leg. Note: Each leg will be measured as one unit.

Removing the unserviceable side rail of seat frame and S&F new side rail of existing size and shape made out of well seasoned first class hard wood teak, complete all as shown on drawing and as specified and as directed. Note: Each rail will be measured as one unit.

All as per item No. 8.02 here in before but front rail of seat frame. Note: Each rail will be measured as one unit.

All as per item No. 8.02 here in before but back rail of seat frame. Note: Each rail will be measured as one unit.

Removing the unserviceable centre stiffners and S&F new stiffner of existing size and shape made out of well seasoned first class hard wood teak, complete all as shown on drawing and as specified and as directed. Note: Each stiffner will be measured as one unit.

Removing the unserviceable back rest stiffner and S&F new stiffner of existing size and shape made out of well seasoned first class hard wood teak, complete all as shown on drawing and as specified and as directed. Note: Each stiffner will be measured as one unit.

CHAIR WRITING :- FD-280/ 20/ 202 Removing the unserviceable broken back leg and S&F new leg of existing size and shape made out of well seasoned first class hard wood teak, complete all as shown on drawing and as specified and as directed. Note: Each leg will be measured as one unit.

All as per item No. 9.00 here in before but front leg. Note: Each leg will be measured as one unit.

Removing the unserviceable side rail of seat frame and S&F new rail of existing size and shape made out of well seasoned first class hard wood teak, complete all as shown on drawing and as specified and as directed. Note: Each rail will be measured as one unit.

All as per item No. 9.02 here in before but front rail of seat frame. Note: Each rail will be measured as one unit.

All as per item No. 9.02 here in before but rear rail of seat frame. Note: Each rail will be measured as one unit.

Removing the unserviceable arm rest and S&F new arm rest of existing size and shape made out of well seasoned first class hard wood teak, complete all as shown on drawing and as specified and as directed. Note: Each arm rest will be measured as one unit.

Removing the unserviceable back rest stiffner and S&F new stiffner of existing size and shape made out of well seasoned first class hard wood teak, complete all as shown on drawing and as specified and as directed. Note: Each stiffner will be measured as one unit.

Removing the unserviceable bottom stiffner and S&F new stiffner of existing size and shape made out of well seasoned first class hard wood teak, complete all as shown on drawing and as specified and as directed. Note: Each stiffner will be measured as one unit.

Drg No. FD-279, FD-229, FD-280, FD-282, FD-244 Re-canning all type of wooden chairs, stool dressing, Bin soild linen, stool dressing etc., after removing of old cane and tightning of frames, weaving with new white plastic cane with 1.8mm wide oval type and 3mm wide oval type for border all along the frame, approved quality, etc complete all as per pattern shown on drg and as specified and as directed. Note:- Cane shall be of plastic strips of superior quality, type-I, (HDPE) white or cream as directed by Engineer-In- Charge of uniform width conforming to IS-5387.

Preparing the surface of wooden furniture of any description, by applying sand paper, removing the stains and filling the bore holes, cracks by applying Bees wax and chalk powder etc,and applying french polish to all faces, applied uniformly, glossy finish, etc complete all as specified and as directed for Chair Dining: Drg No. FD- 279.

All as per item No. 11 here in before but for Book case small. Drg No. FD- 45/ 355.

All as per item No. 11 here in before but for chair dining long back. Drg No. FD-353

All as per item No. 11 here in before but for Chair Easy. Drg No. FD-229.

All as per item No. 11 here in before but for Chair writing. Drg No. FD-280

All as per item No. 11 here in before but for Table bedside. Drg No. FD-248.

All as per item No. 11 here in before but for Table centre. Drg No. FD-274.

All as per item No. 11 here in before but for Table dining for 6 person. Drg No.FD-273.

All as per item No. 11 here in before but for Table dressing ladies. Drg No. FD- 251.

All as per itemNo. 11 here in before but for Table writing. Drg No. FD-275

All as per itemNo. 11 here in before but for Teapoy. Drg No. FD-278

All as per itemNo. 11 here in before but for Peg table. Drg No. FD-277

ALMIRAH LARGE STEEL :- FD-1031 Scrapping old painted surfaces and complete removal of existing paint on surfaces with chemical / aerosal spray and sparay painting of two coats of synthetic enamel paint over a coat of red oxide primer and removal of dents / bends and welding wherever required filling with putty including preparation of surfaces complete all as specificed and as directed. Note :-Almirah as a whole shall be measured as single unit.

ALMIRAH MEDIUM STEEL :- FD-1032 Scrapping old painted surfaces and complete removal of existing paint on surfaces with chemical / aerosal spray and sparay painting of two coats of synthetic enamel paint over a coat of red oxide primer and removal of dents / bends and welding wherever required filling with putty including preparation of surfaces complete all as specificed and as directed. Note :-Almirah as a whole shall be measured as single unit. Note for Sl item No. 12.00 & 12.01 : Royal blue / Air Force blue colour for entire Almirah and half white colour for doors ( front side) as per sample kept in BSO office.

Removing the existing unserviceable damaged shelf from Almirah large steel and S&F new shelf made out 1.00 mm thick MS sheet bent to shape of existing pattern welding etc.,including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specificed and as directed. Note: Each shelf will be measured as one unit.

Removing the existing unserviceable damaged shelf from Almirah medium steel and S&F new shelf made out 1.00 mm thick MS sheet bent to shape of existing pattern welding etc.,including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specificed and as directed. Note: Each shelf will be measured as one unit.

Removal the existing unserviceable lock of any description in any position from Almirah large / medium steel and S&F new lock (brass) 6 levers with duplicate key fixing with suitable machine screws complete all as specificed and directed.

Removal of existing unserviceable handle from Almirah large / medium steel and S&F new chromium plated handle 100 mm long fixing with suitable nut / pins complete all as specificed and as directed.

Chair Varandha FD- 359: Re-canning of chair varandah after removing the existing cane and to carry out necessay welding and repair if required and painted with two coats of white synthetic enamel paint and weaving with new white plastic cane of approved quality with 4mm wide half round type for seat and back as per pattern shown on drg including fixing of 4 Nos hard rubber shoes of 20 mm dia (black colour) to each chair verandah complete all as shown ansd as directed. Note: Cane shall be of plastic strips of superior quality, type-I, (HDPE) white or cream as directed by Engineer-In- Charge of uniform width conforming to IS-5387.

TABLE OFFICE OFFICER / CLERK STEEL :- FD-1003/ FD-1004 : Removing the unserviceable drawer and S&F new drawer made out of 1mm thick MS sheet made to shape, welding etc,including preparing the new steel and iron surfaces and applying two coats of smoke grey synthetic enamel paint over a coat of red oxide primer complete all as shown on drg and as directed. Note: Each drawer will be measured as one unit.

Rremoving the existing unserviceable lock of any description in any position and S&F new lock (brass) 6 levers with duplicate key fixing with suitable machine screws complete all as specificed and directed.

Removing the old unserviceable top of table office clerk steel and S&F new top made out of 18mm thick pre-laminated particle board, exterior grade, ISI marked, with one face decorative laminate and other balancing white including 20/19 X4mm thick teak wood, half round beading, duly polished, glossy finish all around complete all as specificed and directed

Removing the old unserviceable top of table office officer steel and S&F new top made out of 18mm thick pre-laminated particle board, exterior grade, ISI marked, with one face decorative laminate and other balancing white including 20/19 X4mm thick teak wood, half round beading, duly polished, glossy finish all around complete all as specificed and directed

TABLE 900 X 600 mmX760mm : FD-1007/1008/1009 Removing the old unserviceable table top and S&F new table top , made out of 18mm thick pre-laminated particle board, exterior grade, ISI marked, with one face decorative laminate and other balancing white including 4mm thick teak wood beading all around duly french polished, glossy finish complete all as specificed and directed

Rremoving the existing unserviceable lock of any description in any position and S&F new lock (brass) 6 levers with duplicate key fixing with suitable machine screws complete all as specificed and directed.

Scrapping old painted surfaces and complete removal of existing paint on surfaces with chemical / aerosal spray and sparay painting of two coats of synthetic enamel paint over a coat of red oxide primer and removal of dents / bends and welding wherever required filling with putty including preparation of surfaces complete all as specificed and as directed for Almirah 1/2 h 1/2 shelves FD-1033

All as per item No. 16.00 here in before but for table dining OR's Drg No. FD- 165.

All as per item No. 16.00 here in before but for table office clerk steel Drg No. FD- 1004.

All as per item No. 16.00 here in before but for table office officer steel Drg No. FD- 1003.

All as per item No. 16.00 here in before but for with drawer steel 900X600mm Drg No. FD- 1008.

All as per item No. 16.00 here in before but for with out drawer steel 900X600mm Drg No. FD- 1007.

All as per item No. 16.00 here in before but for Teapoy varandah Drg No. FD- 383

Mahesh Traders

Toffy Construction