CERTAIN MISC WORKS PERTAINING TO POP UNDER AGE B/R-II AT IMA DEHRADUN

Amount

M&L for application of Ist coat including preparation of existing black top road surface by brushing with wire brushes for removing cacked mud etc sweeping with brooms and finally fanning the plain surface with gunny bags or air compressor and to remove all loose dirt and applying one coat of black road marking paint (water based) spraying with mechanical mean complete all as spd and directed.

M & L for application of 2nd coat after two days of Ist coat (given in Item No.-1) and prepration of existing of black top road surface by bru;shing with wire brushing for removing cacked mud etc sweeping with brooms and finallyfanning th e plain surface with gunny bags or air compressor and to remove all loose dirt and applying one coat of black road marking paint (water based) spraying with mechanical mean comjplete all as specified and directed.

Material and labour for preparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width thermoplastic paint (Hot application) white/ yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers, thermoplastic requirement for glass beads shall be the table No 800.4 of MORTH specification including spraying of glass beads and ermoving of exicesting old paint etc all as per manufacture instructions complete all as specified and directed.

M&L preparation of old distempered surfaces of walls and applying one coat of oil bound distemper complete all as specified.

M&L for preparation of old plastered or brick masonry surfaces of wall, corrugated AC sheet roofing and applying one coat of cement base paint (snowcem) complete all as specified.

M&L for preparation of old painted plastered surfaces of walls, pillars and applying one coat of synthetic enamel paint over 03 mm thick wall care putty in two coats complete all as specified and directed

M&L for preparation of old painted wooden surfaces over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of old painted steel surfaces including exc 10cm width or girth etc and applying one coat of synthetic enamel paint complete all as specified.

M&L preparation of old polished wooden surfaces of any description over 10cm width or girth and applying one coat of manson polish incl rubbing complete all as specified and directed.

M&L for preparation of existing old surface of any type and apply one coat of weather coat exterior emulsion, nature to be use on vertical as well as horizontal surface ,flooring , completed all as per manufacturer instruction. (Rate shall be inclusive of scafolding and other arrangement to reach height of upto 10 mtr). Make:- Asian paint, Berger paint, Nerolac paint.

M&L for preparation of cement concrete ground surface by brooming, washing and scrubing with wire brush to remove algae, fungus and moss growth then apply a self priming coat of acrylic waterproof floor paint after diluting the emulsion with 30-40% water and after 6-7 hours apply 02 coats of acrylic waterproof floor coat emulsion for outdoor application after thinning with water to obtain brushable consistency and glossy finish etc all as directed by Engr-in-charge. Make: Indigo paints, Asian Paints, Berger paints

M&L for preparation old metal sheet roof of any height by removing mildew, dirt and any loose flaps of old paint on roof surfaceand apply one coat of synthetic enamel paintf by mechanical means of machine spray Complete all as per manufacturer Instruction and directed by Engr in Charge.

M&L for complete removal of existing treatment of over concrete kerb stone and applying two coat synthetic enamel paint over a one coat of primer , complete all as specified.

M&L for complete removal / scrapping of existing treatment on wall / ceiling using mechanical grinder/ sander etc upto to the height 15m complete all as per manufacturer instruction and directed by Engr in Charge (Rate shall be including scafolding and other arrangement to reach height).

M&L for one coat of 03 mm thick wall putty on wall / ceiling through normal applications to provide smooth surface complete upto to the height 15m complete all as per manufacturer instruction and directed by Engr in Charge (Rate shall be inclusive of scafolding and other arrangement to reach height)

M&L for one coat of primer on wall / ceiling through normal applications complete upto to the height 15m complete all as per manufacturer instruction and directed by Engr in Charge (Rate shall be inclusive of scafolding and other arrangement to reach height)

M&L for two coat of plastic emulsion (light / dark shade) on wall / ceiling through normal application using machinery etc complete upto to the height 15m complete all as per manufacturer instruction and directed by Engr in Charge (Rate shall be inclusive of scafolding and other arrangement to reach height)

M&L for providing and fixing 25 to 30mm thick plaster of paris ceilling/wall POP designer frame ( gypsum anhydrous) to flat surface over 2nd class soft wood fillets,or metal frame work and reinforced ,with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) Extra over item 12079 & 12080 for any sunk or raised moulding comleteed all as specified and directed

All as per item No. 18 above but to curved surface.

M&L for preparation of existing old surface and one coat of plastic emulsion (light / dark shed) on wall complete upto to the height 15m complete all as per manufacturer instruction and directed by Engr in Charge (Rate shall be inclusive of scafolding and other arrangement to reach height)

M&L for Grinding of existing mozaic / kota stone flooring including mirror polishing complete all as directed by EIC

M&L for Exterior colour tile skirting and dado of size 30x60cm x7to 8 mm thick and jointed with grey cement slurry and pointed in same colour tile grout to match the shade over and including screed bed or bedding layer or mortor 15mm thick in cement mortor 1:6 including dismantling existing tile complete all as specified and directed.

S&F in repair 15 mm bore long body bib tab Chromium plated with wall flange complete all as specified and directed. Make - Jaquar ( Opal prima series) / cera ( rubby series)/ Somany(Bellis series)

M & L for 1st class wood teak wood plain chowkats and frame wrought rounded or chamfered put together with glue pinned at joints and fixed complete all as specified and directed, including 40mm thick 1st class teak wood decorative plain framed and arch shape glazed and panelled shutters (2 leafs ) (any number of decorative panels) with lock rail 150mm, bottom rail 200mm and panel of 15mm thick 1st class teak wood as per IS 1003 (part-I) kiln seasoned and chemical pressure treated. Alongwith Ist class teak wood plain fillets exc 13 but n.exc 25sqcm square / rectangular or triangular in section clean sawn secured with nails or brads. Now, apply two or more coat melamine polish on wood surfaces over a coat of wooden primer & wooden filler complete all as specified and directed including fancy and decorative type 300 mm long brasss barrel, semi barrel and skeleton tower flush bolts 03 Nos in each panel, total panels 02 Nos and fixed flush complete with,125-150mm butt hinges, cast brass with mild steel hinge pin brith polished and fixed with fancy and decorative type 300mm long brass sliding door bolt and fancy type and decorative 150mm long extruded brass handles (04 Nos) & door stopper fabricated type polished complete all as specified and directed. Qty 01.00 Sqm (Appx). Note : The doors and chowkats to be made as per existing design / sec in chetwode building, Contractor shall visit the existing internal heritage Chetwode doors before quoting their rates.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

M&L for repair by dismantling of existing wooden floor and provide new HDF laminate wooden flooring of 08 mm thick over 2 mm thick Foam sheet over a layer of polythene film sheet over and all necessary fixtures to match with existing floor level and finished top finished floor. completed all specified and directed.

M & L applying a coat of Texture paint of any colour/shed of old coating as per manufacture instruction complete all as specified.

M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of existing brick work complete all as specified and directed.

M&L for 15mm thick ready mix cement plaster on brick, concrete surfaces and Ceiling including providing & mixing water proofing compound as per manufacturers specification, surface finished even & fair, finishing curing scaffolding including taking down of existing cement plaster etc complete all as specified and directed. Make:- ACC (Suraksha)/Ultratech (Readyplast)/Birla (Aerocom)

M&L for Preparation of surfaces of wall / ceiling and applying two coats of weather coat exterior paint over a coat of primer and over a coat of 3mm thick white cement base water proof putty including sanding/grinding complete all as specified and directed (work to be carried upto a height of 7.5m). Note : The work pertaining to periodical services shall be executed from authorized applicator as approved by GE.

M&L for Preparation of primed surfaces of wall / ceiling and applying one coat weather coat exterior paint complete all as specified and directed (work to be carried upto a height of 7.5m). Note : The work pertaining to periodical services shall be executed from authorized applicator as approved by GE. Make:- Asian paint, Berger paint, Nerolac paint.

M&L in repair for DWC(Double wall coruggated) HDPE pipes of size 100mm (ID) confirming to IS 16098 Part-II of strength/stiffness class SN 8 laid in trenches on concrete bed to level/ gadient, jointing as per manufacturers instructions including PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) for concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid as required complete all as specified and directed.

M&L in repair for DWC(Double wall coruggated) HDPE pipes of size 150mm (ID) confirming to IS 16098 Part-II of strength/stiffness class SN 8 laid in trenches on concrete bed to level/ gadient, jointing as per manufacturers instructions including PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) for concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid as required complete all as specified and directed.

M&L in repair for Providing precast cement louvres and jallies,1:2:4 type B-0 (12.5mm graded) 25mm thick (measured solid) set and jointed in cement mortar 1:4 including all mouldings complete all as specified and directed.

M&L for Removing /uprooting, shrubs, trees, vegetation growth & weeds from the RCC Chajja, roof slabs and around PVC tanks etc and cleaning the complete roof with sweep broom making good the damaged / broken portion with cement mortar in 1:4 and finishing the surface fair complete all as specified and directed.

M&L for PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregate) as in foundation of man hole incl demolition of existing cement concrete of any description complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching and forming channels and reforming benching etc complete in PCC 1:2:4 type B1 smooth finish complete 150mm dia & up to 300 mm dia complete all as specified and directed.

M&L for Cleaning the manhole up to 1.50m deep by rodding manually and removing the sludge from manhole and completely cleaning by flushing with water etc complete , sludge shall be buried into ground and covered with the enough quantity of lime to stop the foul smell complete all as specified and directed.

M&L for Cleaning the manhole depth exc 1.50m deep by rodding manually and removing the sludge from manhole and completely cleaning by flushing with water etc complete, sludge shall be buried into ground and covered with the enough quantity of lime to stop the foul smell complete all as specified and directed.

M&L for Cleaning the sewage line up to 150mm dia by rodding manually and removing the sludge and completely cleaning by flushing with water etc complete , sludge shall be buried into ground and covered with the enough quantity of lime to stop the foul smell complete all as specified and directed.

M&L for Cleaning the sewage line over 150mm dia and upto 250mm dia by rodding manually and removing the sludge and completely cleaning by flushing with water etc complete, sludge shall be buried into ground and covered with the enough quantity of lime to stop the foul smell complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25cm complete all as specified and directed.

Removal of surplus soil to distance exceeding 250 metre but n. exc. 500 metre and depositing as directed at a level n. exc. 1.50m above the starting point complete all as specified and directed.

M&L for removing existing water tanks of any description exceeding 250 liters and not exceeding 500 liters capacity, cleaning all Scale dirt etc from tanks and from mouths of circulating pipes including washing with bleaching powder etc reconection and refixing in position with date of cleaning marking with paint complete all as specified and directed.

M&L for removing existing water tanks of any description exceeding 500 liters and not exceeding 1000 liters capacity, cleaning all Scale dirt etc from tanks and from mouths of circulating pipes including washing with bleaching powder etc reconection and refixing in position with date of cleaning marking with paint complete all as specified and directed.

M&L for Non skid/capsule pattern fully vitrified coloured tiles 9 to 10mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured tile grout to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed. Note :- Colour as approved by GE.

S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based tile profile steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall, fixed with self tapping screws etc fixed in repairs complete all as directed.

S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based corrugated steel sheet 0.50 mm thick having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall etc fixed in repairs complete all as directed.

S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based pre profiled (matching with roof sheet) plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall, ridges, gutter fixed in repairs complete all as directed by Engr-in-charge.

Dismantling existing timber scantling in any position.complete all as specified and directed.

S&F Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.(Fe-410-W(Gde E- 250) quality B)

M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F 1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including 20/25mm dia PTMT ball valve complete set and dismantling of existing unserviceable tank and removing from site complete all as specified and directed

S&F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including 15/20mm dia PTMT ball valve complete set and dismantling of existing unserviceable tank and removing from site complete all as specified and directed

S&F Ball valve 15mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as specified and directed. Make:- Cera, Prayag, Shakti.

S&F in repair 15mm GI Elbow/union/socket/Tee (ISI marked) for plumbing complete all as specified and directed.

S&F in repair 15mm GI long screw (ISI marked) for plumbing with all accessories complete all as specified and directed.

S&F Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as specified and directed. Make:- Cera, Prayag, Shakti.

M&L for Construction of brick soak well 2.40 m dia and 4.50 m deep, excavation in soft/ loose soil for foundation in PCC 1:3:6 using 40 mm graded stone aggregate, honeycomb brick work in cement mortar 1:4, RCC 1:2:4 type B-1 as in slab, filling with brick bats including necessary earth work complete in repair and all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork complete all as specified and directed.

M&L for 40mm thick PCC type B1 1:2:4 (20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 Type B-1 {using 20mm graded crushed stone aggregate} as in coping/ benching including weathering, slightly rounded or chamfered angles and throating etc including necessary form work incl demolition of existing cement concrete of any description complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 using 20mm graded crushed stone aggregate as in surface channels and drains including Desludging/ cleaning of open drain of any depth by mechanically means and removing the muck out of IMA premises complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Dismantling post or post struts (wood steel or RCC) any section, including taking out embedded portion and making good disturbed ground in natural ground.

S & F mild steel joints angle channel or tee section and fix independently in concrete as fencing post and similar works congorming to Fe 290 Gde E- 165

S & F mild steel screw bolts purpose made with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed to be fitted with washers and one hexagonal or square nut, exc. 22.5 cm but n exc. 30 cm long dia of shank 11 to 15mm.

S&F in repair PVC coated MS galvanised chain link fencing of weight not less than 03.60 kg/sqm, PVC coating of 1.5mm and mesh size of 50 x 50mm of any type of standard rail straining bolts etc aperture and dia as decided by Engineer-in-charge.

M&L for MS round bars 10mm dia & over cut to length bent to shape required incl cranking bending spirally for hoping for colm and backing ends and binding with & include MS wire (a headed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410W (grade E-250) quality A or Fe 290 (grade E- 165).

M&L for Cleaning of septic Tanks/ Soakage well/ Man holes of any capacity mechanically by using mobile high pressure super sucker machine (Honey sucker) consisting of a sludge tank, a high pressure water jet pump and a high flow jetting blower or vaccum pump for suction and each trip shall clean minimum 6 cum of sludge including diluted liquid. Pumping out sewage water, accumulated Night soil, sludge's, (both solid and liquid) and other obstructive material into dump tank and removing to outside of Defence land immediately for disposal, re-fixing the cover after complete cleaning complete all as specified and directed. Note :- 1. After removal of the sludges from the pits, the septic tanks/ soakage well/ man holes to be cleaned thoroughly with water. 2. Utmost Care shall be taken to maintain hygenic condition while removing sludge/ foul materials to outside of defence land.

Aggrawal Builders and Furnishers (BID ID -3151866)

Amit Traders (BID ID -3155380)

ACE BUILDERS AND CONTRACTORS (BID ID -3155455)

Sharda Enterprises (BID ID -3160712)

M/S S P BUILDERS (BID ID -3155424)