Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.2 LAccepted-AOC COMET ELECTRICAL ENGINEERING CO KOTTAKKAL MALAPPURAM | L1 | Accepted-AOC L1 | |
| 2 | L2₹23.7 L+₹1.6 L (7.08%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹24.6 L+₹2.4 L (10.9%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹24.3 L+₹2.1 L (9.46%)Rejected-AOC | L4 | Rejected-AOC L4 | |
| 5 | L5₹24.6 L+₹2.4 L (10.9%)Rejected-AOC PALAJIKA VALLUHER VEEDU KOSHTAN ALAKKAD NANNAMUKKU 679591 | MALAPPURAM | MALAPPURAM | KERALA | 679591 | L5 | Rejected-AOC L5 |
| Sl No | Description | Qty | Unit | ANSARI KUNDIL L1 | Rafeeq P V L5 | SAJITHLAL K L3 | SURESH.S L4 | MOHANAN T L2 |
|---|---|---|---|---|---|---|---|---|
| 1.00SITC of Street Lights | ||||||||
| 1.00 | 90.15.1.1:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter. 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x16mm suitable for windspeed as per IS 875 Part III fixed head frame including round arm luminary carriage suitable to install 4/6 nos luminaries in symmetrical arrangement including connector foundation bolt 4 nos existing RCC foundation and junction box etc, complete 8 Meters | 1 | each | 24,551 ₹24,551 Lowest | 27,994.13 ₹27,994.13 | 30,000 ₹30,000 | 27,000 ₹27,000 | 28,000 ₹28,000 |
| 1.00 | OD79867/2025-2026:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x12 mm suitable for wind speed as per IS 875 Part III double arm bracket 0.5mt including connector and junction box etc. complete 7 Meters | 12 | each | 19,075 ₹2,28,900 Lowest | 21,747.4 ₹2,60,968.8 | 27,000 ₹3,24,000 | 21,500 ₹2,58,000 | 22,000 ₹2,64,000 |
| 1.00 | OD79868/2025-2026:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x12 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector and junction box etc. complete 7 Meters | 30 | each | 18,600 ₹5,58,000 Lowest | 21,182.68 ₹6,35,480.4 | 26,000 ₹7,80,000 | 21,000 ₹6,30,000 | 21,000 ₹6,30,000 |
| 1.00 | 90.15.4.7:Supply Conveyance, installation, testing and commissioning of 100W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) | 4 | each | 8,601.8 ₹34,407.2 | 9,808.46 ₹39,233.84 | 9,000 ₹36,000 | 9,500 ₹38,000 | 8,000 ₹32,000 Lowest |
| 1.00 | 90.15.4.3:Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) | 54 | each | 6,200 ₹3,34,800 | 7,039.15 ₹3,80,114.1 | 8,000 ₹4,32,000 | 7,000 ₹3,78,000 | 6,000 ₹3,24,000 Lowest |
| 1.01 | OD79848/2025-2026:Supply and fixing of Threaded rod foundation bolt 4nos of 8.8 Grade M20 size in 400-500mm length using chemical anchoring vertically on the footpath. The bolt shall be anchored minimum 10cm inside main concrete and through top slab including 2 nuts washers equivalent to HIlti Threaded rod AM20x3000 8.8 Zinced + Injectable Motar HIT-RE 500 V4/500 | 42 | Sets | 9,600 ₹4,03,200 | 10,982.61 ₹4,61,269.62 | 1,500 ₹63,000 Lowest | 10,500 ₹4,41,000 | 10,000 ₹4,20,000 |
| 1.01 | 14.2:Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres. | 1 | cum | 400 ₹400 | 395.16 ₹395.16 Lowest | 400 ₹400 | 400 ₹400 | 422 ₹422 |
| 1.01 | 14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required. | 2 | cum | 8,200 ₹16,400 Lowest | 8,845.45 ₹17,690.9 | 9,000 ₹18,000 | 8,600 ₹17,200 | 9,000 ₹18,000 |
| 1.01 | OD68802/2025-2026:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more | 30 | kg | 87 ₹2,610 Lowest | 94.99 ₹2,849.7 | 150 ₹4,500 | 92 ₹2,760 | 100 ₹3,000 |
Tender Value
₹26.3 L
EMD Value
₹50,000
Closing Date
22 May 2026, 6:00 pmClosed
Executive Engineer
PWD ELECTRICAL DIVISION KOZHIKODE
NABARD NABARD Tranche XXVII ReConstruction of Kundukkadavu bridge in Ponnani LAC in Malappuram district Electrification General Electrical Work
2026_PWD_851388_1
PWD/BLDG/758/2026-2027
Open Tender
Electrical Works
Item Rate
MALAPPURAM
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹50,000
11 Aug 2026
16 May 2026
25 May 2026
16 May 2026
22 May 2026
16 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1SITC of Street Lights | |||||
| 1.001 | 90.15.1.1:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter. 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x16mm suitable for windspeed as per IS 875 Part III fixed head frame including round arm luminary carriage suitable to install 4/6 nos luminaries in symmetrical arrangement including connector foundation bolt 4 nos existing RCC foundation and junction box etc, complete 8 Meters | - | each | - | - |
| 1.002 | OD79867/2025-2026:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x12 mm suitable for wind speed as per IS 875 Part III double arm bracket 0.5mt including connector and junction box etc. complete 7 Meters | - | each | - | - |
| 1.003 | OD79868/2025-2026:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x12 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector and junction box etc. complete 7 Meters | - | each | - | - |
| 1.004 | 90.15.4.7:Supply Conveyance, installation, testing and commissioning of 100W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) | - | each | - | - |
| 1.005 | 90.15.4.3:Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) | - | each | - | - |
| 1.006 | OD79848/2025-2026:Supply and fixing of Threaded rod foundation bolt 4nos of 8.8 Grade M20 size in 400-500mm length using chemical anchoring vertically on the footpath. The bolt shall be anchored minimum 10cm inside main concrete and through top slab including 2 nuts washers equivalent to HIlti Threaded rod AM20x3000 8.8 Zinced + Injectable Motar HIT-RE 500 V4/500 | - | Sets | - | - |
| 1.007 | 14.2:Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres. | - | cum | - | - |
| 1.008 | 14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required. | - | cum | - | - |
| 1.009 | OD68802/2025-2026:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more | - | kg | - | - |
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1438517.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
materiallist.pdf
Tender Documents • 0.19 MB
BOQ_1438517.xls
BOQ • 0.34 MB
viewsbd.pdf
Tender Documents • 4.73 MB
SPECIFIC_CONDITIONS_Electrical.pdf
Tender Documents • 0.19 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .