Providing and Fixing of retro Reflective sign board in Kotdwar Yojna 01 Najibabad Distt Bijnor

Providing & fixing of retro reflective signs with a corrosion resistant 4 mm thick with 0.4 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully covered with High Intensity prismatic sheeeting type IV as per IRC - 67:1012 retro reflective sheeting with back frame MS angle of 35x 35x 5 mm. legends, letters, numerals and border etc should be as per MORTH specification No.-801.3.7 The sheeting shall have a pressure sensitive adhesive of the aggressive - tack type requiring no heat Slovent other preparation for adhesion to a smooth clean surface, in a manner recommened by the sheeting manufacturer. The ACM (Aluminium Composite Materials) shall be fixed on the Back frame MS Angle with riveting. Micro primatic type IV Retro reflective sheeting confirming to ASTM D4956-09 shall be pressure fixed. The retro reflective sheeting tested for a certificate and luminance, shrinkage, flexibility, liner removal, adhesion, impect resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Goverment Laboratory Insittute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed labroatory in Indian can be accepted provisionally. In such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same Report shall be uploaded which quoting tender. the rate shall include all materials, labour, T7P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge.

6M Span overhead Cantilever Structure with 300dia MS one vertical post Supply, fixing & erection of built up Cantilever Structure 6m span comprising of one vertical posts of 6m height made up of 300mm NB heavy class MS pipe as vertical member welded with 10mm MS plate at top & 12mm MS plate as bottom. The horizontal Truss shall comprise of 50mm dia heavy class MS pipe and 40mm dia heavy MS pipe as bracing & 10mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC foundation os size 0.90x0.90x1.50 m of required depth as pe site condition for built up structure including earth work in excavation 100mm thick lean concrete in 1:3:6 cement coarse sand and 40mm guage stone ballast and RCC-M25 grade concrete including supply and fixing of 25mm dia foundation bolts 600mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete installation work shall be as per relevant caluses of MORTH&H specification section 800 and IRC 67:2012 complete in all respect the rates shall include cost of design fabrication, supply, transporation Local shifting Erection of signage structure using crane, inclusive of all taxes etc. all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in-charge.