ZP

Drilling of Rotary bore Well (which will be carried out by Pilot bore hole) to a finished dia of 200/225/300/350/450mm dia hole for insersion of 110/140/160/180/200 mm PVC Pipe/ 175/200 mm PVC Blue Casing Pipe by Rotary drilling Rig inall formations suitable for rotary drilling such as alluvial. Loamy,clayey, sandy burried channels, Highly distrubed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, nedium rock all formations typically and suitable for rotary drilling etc. including insertion of casing Pipe, couplings, cap, Plug fixation and including filling the peroferal gap with rebuillied pebbeled gravel packing , Bore development conducting yield test, and all other required in the fixation of Pipe assembly etc. But excluding the cost of Casing Pipe, couplings, dummys, clamp etc. as recomanded by the deparmental Geologist. The Bore should be developed with compressor Air untill clear water free from sand and other materials comtinuously discharged. the size of Gravel used for gravel packing should be as per ISI specification used for Rotary Tube well. The Pebbeled Gravel Packing should be Carried out in such a way that the theorotical quantity consumed completely.Drilling of rotary bore well 350 dia for insertion of pipe dia of 175 mm including CP 13.615%

Cost and supply of 175 mm dia blue casing pipe from approved company excluding taxes TURBO

Cost slotting charges to the 175 mm PVC casing pipe etc., including CP 13.615%

Cost and supply of following materias including all taxes etc., completed 175 mm dia bail plug.

Cost and supply of following materias including all taxes etc., completed 180 mm dia Bore cap inlcuding CP 13.615%

Cost and supply of following materias including all taxes etc., completed 175 mm dia MS CLAMP Set

Provision for Geological survey charges including CP 13.615%

Supply and Transportation of ..............,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well. 25 HP, 20-25 Stage submersible Motor & Pump set including CP 13.615%