ADDN ALTN TO TOILET BLDG NO T 277 T 278 AT 4 TRG BN 1 EME CENTRE IMPROVEMENT OF OPEN BATH ROOMS 04 X S COY FOR TRAINEES AT 3 TB AREA 1 EME CENTRE PROVN OF BARBED WIRE FENCING AT M 1 BISON HOUSE OFFR MD ACCN AND PROVN OF 81 NOS UTENSILS PLATE RAC

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings not exc 15 cm thickness (below or above ground level) including terrazzo finishes etc complete all as specified and as directed.

Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in cement mortar 1:6 complete all as specified and as directed

M&L for brick work with using fly ash bricks old size, straight or curved on plan to any radius as in half brick thick wall in CM 1:4 complete all as specified and directed.

M & L for PCC 1:4:8 type D2 75mm thick using 40 mm graded stone aggregate as in sub base to floor complete all as specified and as directed.

Taking down cement plaster including terrazzo finish/ wall tiles on brick or stone walls etc of any description, including raking out joints hacking for key scrubbing sown with water etc complete all as specified and as directed.

Dismantling wall, floor or hearth tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and as directed.

M & L for non skid joint free coloured glazed tiles of size 300x300mmx7mm thick, in floor etc set and jointed in neat cement slurry and pointed in white cement with pigments complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6, for laying floor finishes like tiles & stone slab etc complete all as specified and as directed.

M&L for coloured glazed tiles of size 200mm x 300mm x 7mm thick, on vertical surfaces such as skirting /dados etc set and jointed in neat cement slurry/ paste and pointed in white cement with pigments complete all as specified and as directed.

S & F in repairs Vitreous china Squatting pan, Orissa pattern, size 580 x 440mm white, with integral foot rest including 'P' or 'S' trap with provision of cement concrete bedding complete all as specified and as directed.

S & F Vitreous china pedestal pattern water closet white, including 'P' or 'S' trap set in and including Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs PVC valveless, symphonic action type, 10 ltrs capacity flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe 32mm dia complete all as specified and as directed.

S&F in repairs Stop valves / angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle of size 15mm bore (minimum weight 90 grams) complete all as specified and as directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same shall be recovered by the dept., bore of pipe 15mm complete all as specified and as directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same shall be recovered by the dept., bore of pipe 20mm complete all as specified and as directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same shall be recovered by the dept., bore of pipe 40 mm complete all as specified and as directed.

S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow, Tee, bends, unions, sockets, Threaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete all as specified and as directed.

S&F CPVC pipes, SDR 11, 25 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow, Tee, bends, unions, sockets, Threaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete all as specified and as directed.

S&F CPVC pipes, SDR 11, 40 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow, Tee, bends, unions, sockets, Threaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete all as specified and as directed.

M&L for cutting grooves n exc 10 cm width or girth on exposed surfaces of brick work such as in splays, chamfers, etc.including rubbed finish and waste and making good the cutting surface in CM 1:3 after fixing pipes/conduits etc complete all as specified and as directed.

S & F GI tubing of size 40mm dia, medium grade, laid in floors/walls complete all as specified and as directed.

S & F in repairs bib tap cast copper alloy fancy type chromium plated screwed down for iron pipes or brass ferrule of size 15 mm bore (minimum weight 90 grams) complete all as specified and as directed.

Supply and fix in repairs of brass chromium plated, hand shower health faucet with health facet tube of 1.2 metre long and stand etc including screwed for 15 mm bore iron pipe for two in one tap for WC complete all as specified and as directed. Make: CAT No F160038 of HINDWARE or equivalent in PARRYWARE/CERA as approved by GE.

Supply and fix in repairs 15mm dia brass chromium plated two way Bib tap with wall flange type, fancy type, and high pressure, with flange screwed, and screwed both ends for iron pipe or for unions complete all as specified and as directed. MAKE: CAT No F200004FT of HINDWARE or equivalent in PARRY WARE/CERA as approved

S&F in repairs gate valve of 20 mm bore, gun metal gate valves with iron wheel head screwed both ends for iron pipes complete all as specified and as directed.

S&F in repairs gate valve of 40 mm bore, gun metal gate valves with iron wheel head screwed both ends for iron pipes complete all as specified and as directed.

Supply and fix in repairs of PVC connection of 15mm size with PTMT nuts of length 450mm complete all as specified and as directed

S&F powder coated mild steel SS peg stay set of 6 Nos of pegs complete all as specified and as directed.

M & L for rendering 15mm thick on brick work in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M & L for applying three coats of white wash on walls, including preparation of newly plastered surfaces complete all as specified and as directed.

M & L for applying two coats of cement based paint over a coat of primer on new plastered surfaces including preparation of surfaces newly plastered surfaces complete all as specified and as directed.

S&F in repairs 110mm bore UPVC/PVC (SWR) pipe single socketed (ISI Marked) any length with rubber ring joints, complete fittings etc to wall fixed with MS clamps 8mm dia with nuts/nails etc., complete all as specified and directed.

S&F in repairs for UPVC/PVC (SWR) pipes 110mm dia laid in floors single socketed with rubber ring joints complete all as directed and as specified complete all as specified and as directed.

S&F in repairs UPVC/PVC (SWR) pipes 75mm dia laid in floors, single socketed with rubber ring joints complete all as specified and as directed.

S&F in repairs110mm bore UPVC/PVC (SWR) bends any radius diminishing pieces or tapers with access doors etc, complete all as specified and as directed.

S&F in repairs 110 mm bore UPVC/PVC (SWR) double 'T' equal or un equal bends with access door complete all as specified and as directed.

S&F in repairs UPVC/PVC (SWR) bends 110mm bore, any radius complete all as specified and as directed.

S&F in repairs UPVC/PVC (SWR) bends 75mm bore, any radius with oval access door complete all as specified and as directed.

S&F in repairs UPVC/PVC (SWR) 110mm bore junction (Double 'Y" equal or unequal with access door complete all as specified and as directed.

S&F in repairs UPVC/PVC (SWR) 110 mm dia vent cowl complete all as specified and as directed.

S&F in repairs three layers rotational moulded polyethylene water storage tank (cylindrical, vertical with classed top) hoisted and fixed in position of 1000 liter capacity including supply and fixing 20mm ball valve ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe 40mm bore & fixed.(Minimum weight 210gms ), complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) not exc 1.5 Sqm each complete all as specified and as directed.

S & F Solid PVC door framed of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-enforced with MS square tube all as specified in SSR Part-II of 2020 complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawings given in Section 8 of MES Schedule Part-II 2020 as applicable complete all as specified and as directed.

S & F 150mm long aluminium handles, cast type anodised extruded section and fixed complete all as specified and as directed.

S & F aluminium anodized barrel tower bolt of extruded section of size 150 mm long complete all as specified and as directed.

M & L for Butt hinges of size 100 mm long extruded aluminium alloy with galvanised mild steel hinge pin of type C-21 complete all as specified and as directed.

M&L for preparing the plastered or unplastered old surfaces of walls and applying one coat of white wash complete all as specified and as directed.

M&L for preparing the plastered or unplastered old surfaces of walls and applying one coat of cement based paint on walls complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

S&F MS Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates grade Fe 410 W complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed.

S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F Pre painted Galvalume aluminium zinc coating GI based plain / profiled sheet as in ridge / wall cladding steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel painting to steel surfaces over a coat of red oxide primer including preparation of surfaces complete all as specified and as directed.

M&L for PVC(SWR) 75 mm dia vent cowl complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as specified and as directed.

M&L for complete removal of existing treatment on wall surface and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed.

M&L for preparation of old painted steel surfaces and applying one coat of synthetic enamel painting to steel surfaces complete all as specified and as directed.

Excavation in trenches n.exe 1.5m wide and not exe 1.5m deep for laying of drainpipes etc or for manhole, etc., not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in, soil, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated soil to a distance not exc 50m and depositing where directed complete all as specified and directed .

M&L for PCC 1:4:8 using 40mm graded stone aggregate as in foundation concrete complete all as specified and as directed.

M & L for rendering 15mm thick in CM 1:4 on other than fair face of brick work surfaces to be finished fair and even smooth with using extra cement and mix with 2% water proofing compound by weight of cement complete all as specified and as directed. Note: WPC will be measured and paid separately.

Extra over forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

M & L for precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slab for man hole set in CM 1:6 complete all as specified and as directed.

M&L for TMT bars 8mm to 10mm dia cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L for 150mm bore Reinforced concrete pipes, class NP3 laid and jointed with collar complete all as specified and as directed.

M&L for SGSW pipe of 150mm bore laid and jointed with collar complete all as specified and as directed.

M&L for Concrete bed with cement concrete 1:4:8 type D2 using 40mm graded stone aggregate to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested of 150 mm bore complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Dismantling / taking down SGSW / RCC / any type of soil waste pipes 150 mm bore including all fitting like bends etc complete all as specified and as directed.

Demolition of reinforced cement concrete in ground floors and including removal of rubbish/ demolished materials out of MD land complete all as specified and as directed.

M&L for cutting into existing manholes for connecting new drain, making good to pipe and rendering, cutting out existing benching for end forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 150 mm internal dia of pipe all as specified and as directed.

Material and Labour for cleaning the septic tanks completely by emptying the liquid, semi solid and solid content including cleaning the inlet, outlet and getting out by using suction pump and filling the foul material in to the covered tanks attached to suction pump and removing, transporting and disposal of the same at a place earmarked for disposal of the foul material by municipal authorities to outside the cantonment area complete all as specified and as directed. NOTE: Cubic content of filled up portion of septic tank shall be measured for payment purpose

Surface dressing not exc 15cm thick in hard and dense soil complete all as specified and as directed.

M&L for broken stone or boulders hardcore of gauge not exceeding 63mm, deposited, spread, levelled in layers not exceeding 15cm thick watered and rolled/rammed to a true surface complete all as specified and as directed.

M&L for designer rubber moulded chequered cement concrete tiles with mixture of grey and white cement in equal proportions with pigments of size 300 x 300 x 22mm or 250 x 250 x 22mm thick and set and pointed in neat cement slurry in floors over a screed bed or bedding layer in CM 1:6, 15mm thick for laying floor finishes etc complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in , cement concrete in kerbs / roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Excavation in post holes or similar holes n.exc 0.50 cum and getting out/returning, filling in and ramming removing surplus soil to a distance n.exc 50 m in soft/loose soil complete all as specified and as directed.

S&F Rolled Mild Steel in joist, angle or tee sections, plates (plain or chequered) channels, fixed independently, without connection plate etc., cut to ordinary length within 20mm of the length, square cut or notched (ordinary and counter sunk) Fe-410-W (Gde-E-250) quality B forming holes without any attachment complete all as specified and directed

S&F Rolled mild steel structure/frame made of MS box/pipe sections ERW or induction butt weld tubes conforming to IS-1161-1979 grade st 240 as in columns, purlins and truss complete fitting as directed including one shop coat of red oxide primer and two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying three coats of white wash on walls including preparation of surfaces complete all as specified and as directed.

S & F in repairs stop valves / angle cock standard of PTMT any colour screwed down for iron pipes or brass ferrule of size 15mm bore (Minimum weight 90 grams) complete all as specified and as directed.

S & F GI tubing of size 15mm dia, medium grade, laid in floors/walls complete all as specified and as directed.

S & F GI tubing of size 20mm dia medium grade, laid in floor/walls complete all as specified and as directed.

S & F in repairs bib tap standard of PTMT any colour screwed down for iron pipes or brass ferrule of size 15 mm bore (minimum weight 90 grams) complete all as specified and as directed.

S & F in repairs stop valves standard of PTMT any colour screwed down for iron pipes or brass ferrule of size 15mm bore (Minimum weight 90 grams) complete all as specified and as directed.

M&L for 10mm rendering in cement mortar 1:4, as backing coat on fair faces of brick work and finishing even & rough to receive glazed tiles etc complete all as specified and as directed.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line wire to be measured)

M & L rendering 15mm thick on surface of brick work/concrete surface in CM 1:4 etc complete all as specified and as directed.

M & L for preparing the old plastered or unplastered decorated surfaces of walls and applying two coats of white wash all as specified and as directed.

M&L Complete removal of existing treatment on walls and applying 2 coats of apex ultima weather proof paint over a coat of apex ultima primer including preparation of surface and complete all as specified and directed. Make : Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux

S&F stainless steel kitchen plate rack complete all as specified and as directed. Make: Cat Part No. P-348 Prayag Polymers Pvt Ltd or equivalent in Polytuf as approved by GE.

Taking down the existing unserviceable point wiring of any description, type, size of light or fan or power or two way or bell etc on TW batten or conduit including removal of batten or conduit or gutters or wooden boards or switches or sockets or regulators or light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall or ceiling to match with the existing surfaces complete all as specified and as directed.

Material and labour for point wiring complete with stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded drawn through and including rigid 20mm dia PVC medium grade conduit and conduit accessories duly ISI marked on concealed etc., with new sunk type pressed steel terminal boxes suitable for switches duly painted with two coats of red oxide zinc chrome primer with suitable hylam sheet cover of suitable size for mounting of switches, regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and making good the disturbed wall surfaces to match with the existing surfaces complete all as specified and as directed for the following :- (a) One light / bell point controlled by one, one way switch 5 amps, single pole.

All same as per item No. 97 above, but one ceiling fan/exhaust fan point controlled by one, one way switch 5 amps, single pole and regulator complete all as specified and as directed.

All same as per item No. 97 above, but one 3 pin 5 amps switch socket out let point controlled by one switch on independent board complete all as specified and as directed.

All same as per item No. 97 above, but one 3 pin 5 amps switch socket out let point controlled by one switch on same board complete all as specified and as directed.

All same as per item No. 97 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 volts grade FRLS confirming to IS-694 for 3 pin 15 amps switch socket combination point on independent board and running of 2.5 square millimetre copper conductor PVC insulated cable FRLS as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed

Supply and fix switch piano, single pole one way, flush type, 5 Amps 230 volts for light, fan and tube light complete all as specified and as directed.

S & F switch socket combination flush type multipurpose 3 pin 5 amps 2 in 1 230 Volts all as specified.

Supply and fix switch socket combination 2 in 1, multipurpose 6 pin of 15 amps, flush type complete all as specified and as directed.

Supply and fix Lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks complete all as specified and as directed.

Supply and fix Ceiling rose of surface Bakelite 65 X 50 mm, three terminals, AC 50 HZ, 230 Volts complete all as specified and as directed.

Supply and fix wall mounted indus plus LED batten with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1 x 20w, 230 volts, bipin holders, DIFFUSED TYPE connector block internally prewired etc with necessary mounting arrangements including all accessories with new 3 core multi stranded copper conductor of size 23/0.193 from ceiling rose to fitting and including LED Tube 20W including taking down existing unserviceable tube light fitting complete all as specified and as directed. Make : Havells cat No-REGALBATTENT8UPTO1X22WSSB SWH incl Tube Rod cat No-PHOTONULTRA2.01213T8SSTL 20WLED865SPC, Wipro cat No WI0921208 incl Tube Rod LL13-181-65SE, Philips Cat No - TMC501P1xT-LED22WP3241 incl tube rod 20w.

Supply anf fix in replacement LED security light luminaire fitting of 1x35 watts with deep drawn housing including all accessories and LED lamp 35W with suitable 40 mm dia GI bracket 0.60 Mtr length fixed on wall with 50x6 mm flat iron, clamps, nuts and bolts complete all as specified and as directed. Make: Havells Cat No - ENDCITYLITPLATE+SL35WLED 757SASYBOPCWOSPD, Wipro Cat No LR13-501-XXX-57-XX, Philips Cat No - BRP030 LED35 CW MR PSU GR DX.

Supply and fix sheet metal enclosure MCB DB SPN 8 Way with 200 Amps rated bus bar of 240 Volts, double door with magnetic locking system for fixing MCB’s / isolators including taking down existing old unserviceable MCB DB complete all as specified and as directed.

Supply and fix MCB SPN 40 amps 240 volts 'C' curve suitable for fixing in MCB DB including taking down existing old unserviceable MCB complete all as specified and as directed.

Supply and fix MCB SP 6 to 32 amps 240 volts 'C' curve suitable for fixing in MCB DB including taking down existing old unserviceable MCB complete all as specified and as directed.

Material and labour for earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia light grade galvanised iron pipe with funnel wire mesh for watering and connecting to main switch board / control board all s shown in electrical plate of SSR Pt - I connected to earthing test point and including testing on completion complete all as specified and as directed. NOTE: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 type C1 by using 20 mm graded aggregate in pit, 50 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 8 mm dia TMT bars @ 100mm centre to centre both ways, RCC cover with CI frame hinges, galvanised iron funnel with watering pipe, wire mesh, complete.

Supply laying or fixing or passing through pipe, 1100volts grade heavy duty cable with PVC insulated aluminium stranded served with inner sheathing of PVC tape and overall PVC insulated in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire of size 16 sqmm two single core cable complete all as specified and directed.

Supply and fix Heavy duty Exhaust fan, metal body, 300mm sweep, 1380 RPM, Air delivery - 1750 CuM/Hr, Power -70 watts, 230 volts AC Supply with louvers including opening in wall and fixing arrangement with nut bolts and making good the disturbed surface complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated with ELCB plug top complete with all accessories such as safety valve, thermostat, NRV, connection piece, in and out going water connection pipe (Hot & Cold) etc complete all as specified and directed. Make : Havells Model GHWAMGTWH025/Racold/V Guard.

SKY CONSTRUCTIONS

M/S M.N.Reddy

K LAKSHMAN SINGH AND CO