Annual contract at unit rate for Washroom repair work and drainage cleaning work at various University buildings in the University campus for the year 2026-27.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

EARTH WORK (EXECUTED WITH MECHANISED

EFFORTS/ MACHINARIES

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soil

Excavation for foundation for depth from 3.0 m to 5.0 m

including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter

lead.(B) Dense or Hard soil

Add extra for Disposing off the excavated stuff of cu.m

above items for lead of (A) 50 m to 100 m

Add extra for Disposing off the excavated stuff of cu.m

above items for lead of (B) 100 m to 200 m

Add extra for Disposing off the excavated stuff of

above items for lead of (C) 200 m to 300 m

Add extra for Disposing off the excavated stuff of

above items for lead of (D) 300 m to 400 m

Add extra for Disposing off the excavated stuff of

above items for lead of (E) 400 to 500 m

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each diposited

layer by ramming and watering.

Filling in plinth with sand under floors including

10 watering ramming, consolidating and dressing complete 1 cu.m 471.69

Providing and filling the plinth/ trench/ ground etc. with

selected yellow soil/ murrum brought from out sidewith

11 ncessary Royalty pass and laying in layers not exceeding 1 cu.m 296.29

20cms. in depth consolidating, watering cleaning the site

etc. complete as per instructions.

Filling in foundation and plinth with brick Bats Chhara in

12 layers of 20cm. thickness including watering, remming and 1 cu.m 615.57

consolidating etc. complete.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

EARTH WORK (EXECUTED WITH MANUAL

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

CONCRETE WORK 0.00

Providing and laying cement concrete 1:3:6 (1-Cement : 3-

coarse sand : 6- hand broken stone aggregates

mmnominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

Providing and laying cement concrete 1:3:6 (1- Cement : 3-

Coarse sand : 6- crushed stone aggregates 20 mm nominal

size) and curing complete including cost of formwork in (A)

Wall Caps / Coping

Providing and laying cement concrete work 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone aggregates

mm nominal size) and curing complete excluding cost of

formwork and reinforcement for reinforced concrete work

in (A) Foundations, footings, Base or columns and Mass

Providing and laying cement concrete work 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone aggregates

mm nominal size) and curing complete excluding cost of

formwork and reinforcement for reinforced concrete work

in (B) Slabs, landing, shelves, Balconis , Lintels, Beams,

Girders and Cantilever , Columns, Pillars posts and struts

upto floor two level. upto floor two level.

Providing TMT Bar FE 500D reinforcement for R.C.C.

18 work including bending, binding and placing in position 1 kg 77.29

complete upto floor two level

Extra for additional lift of concrete for all R.C.C. work cu.m

above floor two level excluding cost of reinforcment

Extra for additional lift of reinforcing steel for all R.C.C. kg

work above floor two level.

Providing throating or plaster drip and moulding to R.C.C. Rmt

Providing and laying damp proof course 25mm thick

22 cement concrete 1:2:4 (1-Cement : 2 coarse sand : 4 stone 1 Sqm 304.53

aggregate 10 mm nominal size) and curing complete

Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

23 reinforcement for reinforced concrete work in (A) 1 cu.m 4247.57

Foundations, footings, Base of columns and Mass

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

24 reinforcement for reinforced concrete work in (C) 1 cu.m 4526.87

Slabs,landing,shelves,Balconies, Lintels,chajja, Beams,

Girders and Cantilever upto floor two level.

Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (D) Columns,

Pillars posts and struts, upto floor two level.

Providing and laying cement concrete 1:4:8 (1- Cement : 4-

coarse sand : 8- hand broken stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

BRICK WORK 0.00

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(B) Conventional

Extra for brick work in superstructure above plinth level

upto floor two level (B) Conventional

Extra for brick work in superstructure above floor two level per floor

(B) Conventional per cu.m

(i) Half brick masonry in common brunt clay building

bricks having crushing strength not less than 35 Kg/Sq.Cm.

in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth (B) Conventional

Extra for half brick masonry in superstructure above plinth

level upto floor two level. (B) Conventional

Extra for half brick masonry in superstructure above floor

two level.(B) Conventional

Masonary work using Aerated light weight concrete block

having crushing strength not less than 35 kg/sqcm for super

33 structure above plinth level upto floor two level in cement 1 cu.m 4597.84

mortar 1:5 ( 1 cement : 5 fine sand ) complete as per

Technical Specification

Providing formwork of ordinary timber planking so as to

give a rough finish including centering shuttering strutting

and propping etc. Height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal

34 of the same for in situ reinforced concrete and plain 1 Sqm 179.36

concrete work in. (A) Foundations Footings Bases of

Columns etc. and Mass concrete.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing formwork of ordinary timber planking so as to

give a rough finish including centering shuttering strutting

and propping etc. Height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal

35 of the same for in situ reinforced concrete and plain 1 Sqm 260.88

concrete work in. (B) Flat surfaces such as soffits of

supspened floors slabs Landings and the like. (1) Floors

mm in thickness.

Providing formwork of ordinary timber planking so as to

give a rough finish including centering shuttering strutting

and propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal

36 of the same for in situ reinforced concrete and plain 1 Sqm 313.06

concrete work in. (G) Columns PillarsPosts and struts. (1)

Square Rectangular Polygonal in plan.

Providing formwork of ordinary timber planking so as to

give a rough finish including centering shuttering strutting

and propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal

37 of the same for in situ reinforced concrete and plain 1 Sqm 202.18

concrete work in. (H) (1) Sides and soffits of Beams Beam

Haunchings cantilevers Girders Bressumers and Lintels not

exceeding 1 M. in Depth.

Providing formwork of ordinary timber planking so as to

give a rough finish including centering shuttering strutting

and propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal

of the same for in situ reinforced concrete and plain

concrete work in. (I) Edges of slabs and Breaks in floors

Providing formwork of ordinary timber planking so as to

give a rough finish including centering shuttering strutting

and propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal

of the same for in situ reinforced concrete and plain

concrete work in. (L) Chullah Hoods, weather shades

Chhajjas Corbels etc. including edges.

Extra for Providing formwork with sheathing steel sheets so

as to give a fair finish in (A) Foundations, Footings, Bases

40 of Columns, Flat surfaces such as soffits of slabs Landings, 1 Sqm 97.33

Beam, Lintel,Coping ,Chajja etc.

PAVING & FLOOR FINISHES 0.00

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and laying Ceramic tiles 6mm thick in flooring

treads of steps and landing laid on a bed of 12mm thick

41 cement mortar 1:3 (1- cement : 3-coarse sand ) finishing 1 Sqm 983.20

with flush pointing in white cement.

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-cement

: 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

42 sand) laid over and jointed with grey cement slurry mixed 1 Sqm 1001.14

with pigment to match the shade of slab including rubbing

and polishing etc. complete. (A) 25mm thick

P & L 24" x 24" vitrified 8 mm thick tile flooring over

mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring

43 by adhesive material including dismentaling of existing 1 Sqm 1432.78

flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

complete for ANTISKIT and DARK shade Tile

Providing and laying coloured glazed tiles of the size

44 skirting, risers of steps and dedo on 10 mm. thick cement 1 Sqm 1452.79

plaster 1:3 (1 cement : 3 coarse sand) & jointed with white

PLASTERING & POINTING 0.00

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for

45 interior plastering upto floor two level and finished even 1 Sqm 171.21

and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

Extra over items 58 to 64 for finishing with a floating coat

of neat cement slurry.

Extra over items 58 to 71 for plastering on ceilings and

47 sofits of stairs upto floor two level instead of plastering on 1 Sqm 25.43

Extra over items 1 to 69, 71 to 87 and 90 for interior Sqm x

48 plastering above floor two level for every additional storey 1 No. of 23.98

height. (1) Single coat plaster storey

Extra over items 1 to 69, 71 to 87 and 90 for interior Sqm x

49 plastering above floor two level for every additional storey 1 No. of 4.87

height. (3) Floating coat of neat cement storey

Extra over item 91 for plastering on ceiling and soffits of

50 stairs above floor two level for every additional storey 1 Sqm 21.86

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

20mm thick sand faced cement plaster on walls upto height

10 metres above ground level consisting of 12mm thick

51 backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm 1 Sqm 337.52

thick finishing coat of C.M. 1:1 (1- cement : 1-sand) etc.

Providing cement vata (10cm. x 10 cm. size) quarter round

52 in cement mortar 1:1 including neat cement finishing, 1 Rmt 24.28

watering etc. complete.

Providing 20 mm thick double coat mala cement plaster on

interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar

53 (1 Cement : 4 coarse sand) in rough finishing and 8 mm 1 Sqm 279.29

thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse

sand) finished with trovel including scaffolding curing etc.

DEMOLITION & DISMANTLING 0.00

Demolition and disposal of unserviceable materials with all

lead and lift.(i) cement concrete.

Demolition including stacking of serviceable materilas and

55 disposal of unserviceable materials with all lead and lift. (i) 1 cu.m 1084.30

Demolition of Brick work and stone masonry including

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii) In Cement

Dismentaling tiled of stone floors laid in mortar including

57 stacking of serviceable materilas and disposal of 1 Sqm 48.91

unserviceable materials with all lead and lift.

Dismentling steel work including distempering and stacking

the materials with all lead and lift.

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water

59 pipes with fittings and clamps including stacking the 1 Rmt 76.64

materials with all lead and lift ( for any dia, of pipe)

Removing and scraping of old deteriorated plaster of any

thickness fromm wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site

of work with all lead and lift

REPAIRS TO BUILDING 0.00

Cutting out cracks of roof terrace to V- section , cleaning

61 out, wetting , grouting with cement and sand slurry 1:3 (1- 1 Rmt 66.85

cement 3-sand )

OTHER ITEM 0.00

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing Stainless Steel Sink Glossy and Satin

made from anticorrosive ASIS 304 grade S.S. of 1 mm thick

with overall size 610 x 460 mm and bowl size 560 x 410 x

62 200 mm size 22x18x 9 inch including fixing in sandwich 1.00 NOS. 3179.96

platform and cutting kota and granite using one's own

materials, tools and tackles all complete as per instructions

of EIC Approved Make.

Labour for carting the debris of old materials etc. by using

one's own tractor- trailors & N.O.C. from Traffic

63 department with labours for loading and unloading rubbish 1.00 Trip 385.75

etc.as and where the directed within the campus/ out side

Providing and rebaring treatement for anchoring raw TMT

bars for old and new reinforcement by using HILTI-150

chemical using all tools and tackles …do….do…. Including

testing the same as per design of structural consultant/

engineer etc. complete as per instructions. For 10mm dia

Application of polymer modified mortar to the damaged

strucuture: Chip off loose weak unsound concrete from the

damaged structural member upto the depth of sound

concrete, removal of corrosion scales on corroded

reinforcement after removal of corrosion scales all exposed

cone. surface shall be cleared. Apply alkaline based rust

converter in two coats with a time interval between two

coats, then apply two coats of IPN coating to the exposed

65 corroded bars, apply CI (corrosion inhabitor) by brush/ 1.00 SQM 471.47

spray over the concrete (avoid coating on steel). After

spraying of inhibitor, bond coat of epoxy-latex based

polymer shall be brush applied to the concrete as well as

steel surface, the subsequent 15 to 40 mm thick application

of polymer modified mortar must be applied before the

bonding coat is hardset. (The details / instructions of

preparing of polymer modified mortar are given in the

methodology of work)

Providing and wet drilling accurate and clean holes of

specified diameter in RCC walls, slabs, beam or any other

RCC memberwithout vibration by core cutting (diamond

drilling) machine of HILTI or equivalent including

66 scaffolding, safety majors, disposing the debris, cleaning for 1.00 EACH 685.78

all levels/ all height as per structural consultant's drawing,

after approval of engineer in charge etc compete. Holes

shall made by authorized approved agency. a) Holes Up to

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and wet drilling accurate and clean holes of

specified diameter in RCC walls, slabs, beam or any other

RCC member without vibration by core cutting (diamond

drilling) machine of HILTI or equivalent including

67 scaffolding, safety majors, disposing the debris, cleaning for 1.00 EACH 771.50

all levels/ all height as per structural consultant's drawing,

after approval of engineer in charge etc compete. Holes

shall made by authorized approved agency. a) Holes of

Providing and wet drilling accurate and clean holes of

specified diameter in RCC walls, slabs, beam or any other

RCC memberwithout vibration by core cutting (diamond

drilling) machine of HILTI or equivalent including

68 scaffolding, safety majors, disposing the debris, cleaning for 1.00 EACH 942.95

all levels/ all height as per structural consultant's drawing,

after approval of engineer in charge etc compete. Holes

shall made by authorized approved agency. a) Holes of

Providing and fixing PVC / G.I. chiken mesh / wire mesh

Jalee 16 x 24 of approved quality for cement plaster work in

69 requried shape and size including the nails and khilas, 1.00 SQM 185.86

G.I./M.S. wires etc. complete using one's own scaffolding,

ladders etc. for all heights as per instructions.

Providing and laying polished machinecut

18 mm thick Green marble slab with mirror polish

stone in require size and shape of approved quality & size

for flushed with wall plaster along with 10mm groove

separating skirting and wall plaster, also in dedo, jambs,

sills and pillars laid on 20 mm thick cement mortar 1:3 (1

cement : 3 fine sand) and jointed with colour cement slury

and colour pigments including edging, rubbing and

polishing etc.all complete as per the architectural details

and as per the instructions.

Providing and laying polished machinecut

18 mm thick R Black granite slab with mirror polish

stone in require size and shape of approved quality & size

for flushed with wall plaster along with 10mm groove

separating skirting and wall plaster, also in staircase, dedo,

jambs, sills ,platform, pillars laid on 20 mm thick cement

mortar 1:3 (1 cement : 3 fine sand) and jointed with colour

cement slury and colour pigments including edging, rubbing

and polishing etc.all complete as per the architectural

details and as per the instructions.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and laying polished machinecut

18 mm thick Galaxy Black Granite/ Lakha Red

Granite slab with mirror polish stone in require size and

shape of approved quality & size for flushed with wall

plaster along with 10mm groove separating skirting and

72 wall plaster, also in staircase , dedo, jambs, sills ,platform, 1.00 SQM 2979.44

pillars laid on 20 mm thick cement mortar 1:3 (1 cement :

fine sand) and jointed with colour cement slury and colour

pigments including edging, rubbing and polishing etc.all

complete as per the architectural details and as per the

Providing, cutting and fixing the double side polished

20mm thick Kota Stone for Partition /shelf etc. with

sides/edge full moulding in semi round shape and polish

around and fixing the same with all necessary civil

work,curing, cleaning the site watering etc. complete for all

heights as per instruction.

Application of fibre plaster in cement mortar to the

damaged structure of R.C.C. and at any height & depth with

all tools and scaffolding etc.: Chip off loose weak unsound

concrete from the damaged structural member upto the

depth of sound concrete, removal of corrosion scales on

corroded reinforcement after removal of corrosion scales all

exposed cone. surface shall be cleared. Apply alkaline

based rust converter in two coats with a time interval

between two coats, then apply two coats of IPN coating to

74 the exposed corroded bars, apply CI (corrosion inhabitor) 1.00 SQM 428.60

by brush/ spray over the concrete (avoid coating on steel).

After spraying of inhibitor, bond coat of epoxy-latex based

polymer shall be brush applied to the concrete as well as

steel surface, the subsequent 15 to 25 mm thick application

of cement mortar (1:3) adding RECRON fibres /SIKA

fibres/ Thermax/ FOSROC make as mfg.'s direction(The

details / instructions of preparing of cement mortar & fibre

are given in the methodology of work)

Labour for half round moulding and polishing in granite any

75 other stone using one's own tools and tackles all complete 1.00 Rmt 86.83

as per instructions of EIC.

Supplying and filling in sunk slab with Cinders in layers of

76 20cm. thickness including watering, remming and 1.00 CUM 2597.40

consolidating etc.complete.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Labour for removing, cutting/ uprooting grass,debris,

leaves, wilds, grass, thorny plants including scrapping,

weeding, sweeping and throwing the rubbish outside the

campus as and where directed by mannnually all complete

as per the instructios including all necessary tools,labours

etc. including throwing the out side of the campus as per

instructions. (The above said waste will not be allowed to

set on fire). By Mannually

CARPENTRY WORKS 0.00

Labour for replacing existing broken/ deteriorated wooden

frame for door/ window/ ventilator/cup-board/ grill/

partitions as described under : Carefully removing the

existing broken member of the wooden frame as directed

and providing and fixing teak wood size of approved quality

and existing section including necassary cutting, sawing,

78 plaining, making & repairing groove/joint etc. including 1.00 SQM 471.47

removing & refixing the eixsting shutter if requried

including applying wet coalter on side, using one's own

nails, khila, flats and clamps, holdfast with N.F. screws

including all civil and carpentery work etc. complete for all

heights as per instructions.(N.B. :- Wood shall be measured

and paid as per Item No. 8)

Labour for replacing existing broken/ deteriorated wooden

member/size of shutters for door/ window ventilator/cup-

board partitions by providing and fixing teak wood size of

approved quality and existing section including necessary

cutting, sawing, plaining, making and repairing joints etc.

79 including removing and refixing existing shutter if required 1.00 SQM 565.76

using one's own nails & fixtures & fastenings, khila, N.F.

screws, fevicol etc. and fixing deficite wooden battens as

per existing and testing the complete work as directed etc.

complete for all heights as per instructions. (N.B. :- Wood

shall be measured and paid as per Item No. 8)

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Replacing existing broken/ deteriorated wooden panel of

shutter for door/ window/ ventilator/ partitions/ ceilings cup-

board etc. as under : Carefully removing the broken panel of

any size/ shape and throwing as directed including

providing and fixing 12mm thick water proof plywood of

IS:710 mark approved quality including cutting, plaining,

sawing and making and repairing groove for new panel in

existing shutter/ grid including fixing deficite wooden

battens where required using one's own fixtures &

fastenings, nails, fevicol etc. and testing the entire work

etc.including applying one coat of wood primer, pakka putty

for wood surfacesand surface preparing including two coats

of synthetic enamel paint of 'asian paints' make & of

approved shade etc. complete for all heights as per

instructions. (N.B. :- Wood shall be measured and paid as

Providing wood work in frames/shutters of different type of

wooden doors, windows, ventilators, cub-boards, ceilings,

partitions, hood/ chajja, wooden stage/ platform etc.

including using dry indian teak wood of approved quality as

per given/existing size & section in required length

including carting on site etc. complete as per instructions.

Labour for making/replacing different wooden items such

as shutters, frames, partitions, ceilings etc. as per

existing/given design and directions including necessary

cutting of wooden sizes/sawing, plaining, making and

repairing joints etc. including using ones's own fixtures and

82 fastenings of approved quality and of existing metal such as 1.00 SQM 621.48

M.S., Aluminium, S.S.etc., N.F. Screws, fevicol etc.

including erecting the job in required position with

necessary civil work etc. complete for all heights as per

instructions. (N.B.

Wood shall be measured and paid separately)

Providing and fixing 0.6mm thick G.I. Plain sheet of ISI

mark and approved quality on existingframes/ wooden/steel

shutters of any size and shape including using one's own

nails, screws nuts, bolts, rivetts etc. and welding work

where required including necessary cutting, grinding, etc.

complete for all heights as per instructions.

Replacing existing rusted/broken flyproof jalee by

providing and fixing S.S. flyproof jalee 304 grade tested of

requried mesh X 28guage and of approved quality including

depositing the rusted jalee in C.D. store fixing deficite

84 wooden battens as per existing including using one's own 1.00 SQM 561.06

khila, nails N.F. screws and removing and refixing the

existing shutter where required etc. complete for all heights

as per instructions. (N.B. :- Wood other than battens shall

be measured & paid separately)

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing 18/19mm thick ply wood of IS:710

mark, approved quality and make, for wall ducts/ ceiling

ducts as per given design and dirrerent types of cup-board,

shelves in required size and shape including using one's

own teak wood size for resting as per existing or M.S. angle

bracket of approved quality and size as per site conditions

including fixing 19mm thick teak wood batten on all sides

85 using one's own all necessary fixtures & fastenings,nails, 1.00 SQM 866.65

N.F. screws, fevicol, plug, and making/repairing hole/

groove where requried including testing the entire work

etc.including applying one coat of wood primer, pakka putty

for wood surfacesand surface preparing including two coats

of synthetic enamel paint of 'asian paints' make & of

approved shade etc. complete for all heights as per

Do……do……but 18/19mm thick ply wood of IS:710

mark, approved quality and make without M.S. angle

brackets but using wooden supports as per existing and

necessary civil work for shelves …..do.…do…..

Providing and fixing 16mm thick ply wood of IS:710

mark, approved quality and make, for wall ducts/ ceiling

ducts as per given design and dirrerent types of cup-board,

shelves in required size and shape including using one's

own teak wood size for resting as per existing or M.S. angle

bracket of approved quality and size as per site conditions

including fixing 19mm thick teak wood batten on all sides

87 using one's own all necessary fixtures & fastenings,nails, 1.00 SQM 775.78

N.F. screws, fevicol, plug, and making/repairing hole/

groove where requried including testing the entire work

etc.including applying one coat of wood primer, pakka putty

for wood surfacesand surface preparing including two coats

of synthetic enamel paint of 'asian paints' make & of

approved shade etc. complete for all heights as per

Do……do……but 16mm thick ply wood of IS:710 mark,

approved quality and make without M.S. angle brackets but

using wooden supports as per existing and necessary civil

work for shelves …..do.…do…..

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing, making and fixing in position 35mm thick indian

teak wood shutters for doors(single or double leaf) fully

panelled using approved quality indian teak wood frames of

size 120mm x 70mm, 35mm thick indian teak wood

shutters with top rails, vertical styles of size 100mm x

35mm, bottom rails of size 230mm x 35mm, intermediate

horizontal rails of given nos. of size 75mm x 35mm and

having pannels of indian teak wood in single piece, having

thickness 19mm / 19 mm thick water proof plywood of

IS:710 mark and maximum height 230mm or equal

partitions as per site condition, with alround beading of

indian teak wood of size 35mm x 15mm etc. including S.S./

aluminium anodized fixtues and fastening (heavy type) of

ISI mark including one coat of wood primer and two coats

oil paint of approved shade of Asian Paints etc. to work at

all height/depth etc all complete as per instructions.

Do.....do.......but providing and fixing 35mm thick wooden

shutter only (single leaf or double leaf) for fully panelled

doors .....do.....do....... including testing the entire job etc.

complete for all heights as per instructions.

Providing, making and fixing in position 35mm thick

indian teak wood shutters for doors(single or double leaf)

fully panelled using approved quality indian teak wood

frames of size 100mm x 70mm, 35mm thick indian teak

wood shutters with top rails, vertical styles of size 100mm x

35mm, bottom rails of size 230mm x 35mm, intermediate

horizontal rails of given nos. of size 75mm x 35mm and

having pannels of indian teak wood in single piece, having

thickness 19mm / 19 mm thick water proof plywood of

IS:710 mark and maximum height 230mm or equal

partitions as per site condition, with alround beading of

indian teak wood of size 35mm x 15mm etc. including S.S./

aluminium anodized fixtues and fastening (heavy type) of

ISI mark including one coat of wood primer and two coats

oil paint of approved shade of Asian Paints etc. to work at

all height/depth etc all complete as per instructions.

Providing and fixing 35mm thick flush door shutters(single

leaf or double leaf) of approved quality, solid core

construction with frame of first class hard wood with cross

band and face veneer of plywood pannels including

anodised alluminium fixtures and fastenings and M.S.

hinges ISI mark (heavy type) including one coat of wood

primer and two coats of synthetic enamel paint of 'asian

paints' and French polish three coats for veneer sheet as

diercted including testing the entire shutter etc. complete as

per instructions.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing 35mm thick factory made moulded

door shuter consisting of solid core single leaf flush door of

30mm thickness, lipped with 15mm (5mm x 3) thick x

30mm width on one stiles and top rail and 10mm (5mm x 2)

thick x 30mm width on the other stiles and bottom rails.

The inner panel laminated with 2mm thick termite proof,

water proof and fire resistant moulded PVCsheet with

93 raised panel design in different plain and /or prelim colours 1.00 SQM 2152.31

on one side after routing the moulded design on flush door

and 2mm plain and/or prelim PVC sheet on other side using

rubber adhesive on flush door and solvent cement adhesive

on the PVC liping etc. complete as per direction of Engineer

in charge, manufacture’s specification and drawing.

Labour for carefully removing the existing

deteriorated/broken wooden M.S. shutter with or without

frame of any size of door/ window/ ceiling ventilator,

94 partition,grill,etc. including finishing all jambs , lintels and 1.00 SQM 119.35

sill with required cement mortar CM(1:4) and depositing

the same in to the C.D. store with carting, lifting etc. all

complete as per instructions.

Providing and fixing FRP frame sizse 125 x 65mm and

35mm thick FRP depress panel shutter having extra

reinforcement on sides and edges in Gel coat finish. The

core of the shutter and frame is to be filed up with injected

fire retardant grade polyurethene foam done in situ along

with embedded wooden pieces for stiffening and also taking

hinges and fintures. The whole FRP frame and shutter is to

be wter proof weather proof, temrite proof and resistance

wo mild acid/alkali. Rates are to be iincluding of SS hinges

with neecssary screws and alluminium fixtures and

fastenings and fastener sleeve.

Do….do…. but 28mm thick FRP shutter only

Providing and fixing float glass(plain glass of Modi

Guard/Saint Gobain make) bedded in putty or fixed with

wooden beadings of existing size wherever required

including the cost of wooden beadings of 12 x 12 mm size

on both sides of first class teak wood and necessary cutting

of glass using own nails, screws, wire clips, etc. complete

for all heights and cleaning the site as per instructions for

4mm thick glass.

Do……do……but for 3.5mm Bajari Glass

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Labour for carefully removing and refixing existing steel

welded mesh jali/ m.s. grill/ safety bars etc. for glass repair

works for doors, windows, ventilators etc. including making

99 and repairing grooves/ holes/ grip etc. where required 1.00 SQM 188.59

including all carpentery/ civil/ smithy works, tools and

tackles and testing the entire work etc. complete for all

heights with necessary scaffolding as per instructions.

Providing/Replacing existing rusted guide railings/ ladders/

board with frame/ grill/ safety bars etc. from window/

ventilator/ opening ceiling/ partition/ staircase/

platformsetc. by providing/ fabricating and fixing M.S.

fabricated shutter/ grill/ frame/ members as per existing

pattern and using different M.S.sections / hollow sections of

ISI mark and of reqired size including 'Asian Paints' make

one caot of metal primer etc. complete with all smithy/

civil/ carpentery work using one's own electric welding

machien sets etc. complete for all heights as per

Providing and fixing 15micron colour anodized aluminium

glazed ventilators with lauvers mechanism of heavy strips

for 5.00mm thick frosted glass panels or as per site

conditions as under: Making frame work for of approved

design and quality including fixing in section 63mm x

38mm x 1.2 mm weight @ 0.643 kg / mtr. including fixing

101 rubber and weather strips of approved quality using one's 1.00 SQM 1187.31

own fasterners, nuts bolts, metal screws, approved quality

bearings, including necessary civil work where required

including ceiling the entire sides and edges of frame and

wall with sealing compound and testing the entire work etc.

complete as per instructions.

Labour for repairing existing wooden/m.s.shutters of any

size and shape by necessary plainning/ cutting or re-setting

the entire shutter in required line, level and position

102 including re-aligned the existing shutter for easy operation 1.00 SQM 171.44

using one's own all necessary fixtures & fastenings,

wedges,etc.for the job etc.and testing the complete work as

directed etc. complete for all heights as per instructions.

Providing Carpenter helper labour using one' own

103 transportation and supervising labours for the various works 1.00 Each 385.75

as per given instructions by Engineer Incharge.

Labour for repairing existing wooden/m.s.shutters of any

size and shape by re-aligned the existing shutter by

seasoning , cutting from bottom ,and requried carpentry

104 work without removing entire shutter for easy operation 1.00 SQM 42.85

using ones own tools and machine and testing the complete

work as directed etc. complete for all heights as per

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing 125mm M.S. handle/300 mm M.S.

stay- adjuster for M.S. window of either side with bolt,

nuts, washers etc. including repairs to existing

105 broken/rusted clamp/hook of frame/shutter by replacing the 1.00 No. 27.42

same clamp/hook using one's own tools set where required

as directed. etc. complete for all heights as per instructions.

Providing and fixing 12" inch / 300 mm S.S aldrop heavy

size....with set.....do...do...do...for door of either side with

bolt, nuts, washers etc. including repairs to existing

106 broken/rusted clamp/hook of frame/shutter by replacing the 1.00 No. 107.15

same clamp/hook using one's own tools set where required

as directed. etc. complete for all heights as per instructions.

Providing and fixing 10" inch / 225 mm S.S

tadi/latch...heavy size....with set.....do...do...do...for door of

either side with bolt, nuts, washers etc. including repairs to

107 existing broken/rusted clamp/hook of frame/shutter by 1.00 No. 85.72

replacing the same clamp/hook using one's own tools set

where required as directed. etc. complete for all heights as

per instructions.

Providing and fixing 6" inch/ 150 mm S.S stopper...heavy

size....with set.....do...do...do...for door/window of either

side with bolt, nuts, washers etc. including repairs to

108 existing broken/rusted clamp/hook of frame/shutter by 1.00 No. 60.00

replacing the same clamp/hook using one's own tools set

where required as directed. etc. complete for all heights as

per instructions.

Providing and fixing 4" inch/100 mm S.S handle

set...heavy size....with set.....do...do...do...for door/window

of either side with bolt, nuts, washers etc. including repairs

109 to existing broken/rusted clamp/hook of frame/shutter by 1.00 No. 30.00

replacing the same clamp/hook using one's own tools set

where required as directed. etc. complete for all heights as

per instructions.

Providing and Fixing Plain / CNC Cut ACP sheet of ISI

mark having thickness 4 mm of Solid / Metalic series

including aluminium framing Of size 63.5x38.10x1.5 mm

piping with dimentional accuracy, neat aeges and clean

110 Joints etc by using ones own screw, nails etc and seal the 1.00 SQM 2852.85

joint by using silicon 789np and other required hardware

material complete for all heights using stagging scaffolding

( H frame) including grinding ,groove etc complete as

specified and directed by EIC

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and Fixing Plain / CNC Cut ACP sheet of ISI

mark having thickness 4 mm of Solid / Metalic with

existing aluminium framing dimentional accuracy, neat

aeges and clean Joints etc by using ones own screw, nails

etc and seal the joint by using silicon 789np other required

hardware material complete for all heights using stagging

MS scaffolding ( H frame) including grinding ,groove etc

complete as specified and directed.

Providing and fixing 30mm thick FACTORY MADE

SOLID BOTH SIDE PRELAM PANEL PVCDOOR

SHUTTER consisting of frame made out of M.S. tubes of

19 gauge thickness and size of 19mm x 19mm for stiles, top

and bottom rails. M.S. frame shall have a coat of steel

primer of approved makde and manufactures. M.S frame

covered with 5mm thick heat moulded prelim PVC ‘C’

channel of siz 30mm thickness, 70 mm width of which

50mm shall be flat and 20mm shall be tapered in 45 degree

Angle on either side forming stiles, and 5mm thick, 95mm

wide pream PVC sheet out of which 75mm shall be flat and

20mm shall be tapered in 45 degree on the inner side ot

form top and bottom rail and 115mm wide prelim PVc sheet

out of which 75nmm shall be flat and 20mm shall be

tapered on both side to form lock rail, Top, bottom and lock

rails shall be provided either side of the panel. 10mm (5mm

x 2) thick 20mm wide cross PVC sheet shall be provided as

gap insert for top rail and bottom rails. Panelling of 5mm

thck both side prelim PVC sheet to be fitted in the M.S.

frame welded,sealed to the stiles and rails with 7mm (5mm

+ 2 mm) thick x 15mm wide PVC sheet beading on inner

side, and joined togeth with solvent cement adhesive.

Anadditional 5mm thick PVC strip of 20mmwidth is to be

stuck on the interior side of the ‘C” chanel using PVC

solvent adhesive etc. complete as per direction of

Engineering in charge, manufacture’s specification and

Providing and Fixing 3 mm clear acrylic sheet of any size

and shape for any heights using ones own tools and tackles

and other required hardware material complete for all

Providing and Fixing 1mm thick HDP black/white/green

Garware Bird net with 40mm/50mm square mesh as per

Required height with necessary scaffolding and tools and

fastenrs as per instruction .

WASHROOM WORKS 0.00

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps. (A) 100mm x 100mm size P type

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight. (i)

Square mouth traps.(B) 150mm x 100mm size P or R type

Labor for carefully cleaning wall and floor tiles of

toilet/Bathroom/rooms using harpic,brushes and required

tools and tackles etc as per instruction for any size of toilet

Providing and fixing L&K make Fiesta Series/Jaquar /Asian

or equavelent to the series Two Way bib cock for washing

machine including labor and required tools and tackles etc.

as per instruction etc.

Applying Back coat Plaster up to 40 mm thick plaster in

cement mortar (1:4) using sand and cement of approved

quality including even finish for cement plaster patta,

grooves, nozing, etc. and for existing civil work i.e. R.C.C.

119 hood, slab, shed, parapit, canopy, floor, wall and other 1.00 SQM 295.94

structures etc. and places in required size and shape

including labours, using one's own tools, tackles,

scaffolding, ladder, and cleaning the site etc. complete as

per instructions at all heights.

Labour for carefully removing the existing broken white

glazed Wallhung W.C./ Orissapan W.C./ E.W.C only with

120 it's trap of any size and throwing the rubbish as and where 1.00 Each 398.45

directed including cleaning the site etc. complete for all

heights as per instructions.

Providing and fixing wash down water closet (European

type, W.C. Pan) with integral P or S trap including jointing

the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-

fine sand) (Seal and cover to be measured and paid for

121 separately) (A) vitreous China Pattern :(i) in white colour 1.00 Each 1336.30

including removing and refixing supply pipe, plastic seat,

waste pipe,jet-spray connections, etc. and white cement/

solvent cement at joints, N.F. screws, cleaning the site,

testing etc. complete for all heights as per instructions.

Providing and fixing M.S. angle support of size

35X35X5mm upto required length for laboratory sink

making and repairing groove/hole in wall with cementing,

watering including fixing in required line, level & position,

testing etc. complete and returning old broken support to

C.D. store if available as per instructions at all heights.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing washbasin with single hole for pillar

tap including C.I. or M.S. brackets painted white including

sutting holes and making good the same but excluding

fittings.(A) Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour with removing and

123 refixing pillar cock, waste coupline and waste pipe 1.00 Each 1418.56

connections, etc. & neat cement for setting, white cement at

top including fixing in required line, level & position,

testing etc. completeand throwing the broken washbasin

outside campus as directed for all heights as per instructions

Providing and fixing 100mm dia white glazed trap "S" type

of approved quality & model including filling joints with

neat cement/grout solvent cement, making and repairing

hole/groove including fixing in required line, level &

position, testing etc. complete for all heights as per

Providing and fixing Urinal or approved quality including

Urinal with waste pipe , tap etc. complete.(A) White

earthenware flat back or corner type size 430mm x 260mm

x 350mm including removing and refixing supply pipe,

waste connections, fixing missing, G.I. Clamps, N.F.

screws, white cement grouting/vata including fixing in

required line, level & position, etc. and throwing broken

urinal as directed, etc. complete for all heights as per

Providing and fixing solid duro type plastic seat and cover

for wash down water closer with C.P. brass hinges and

rubber buffers. (B) White / Black plastic seal and

cover of approved make, model and colour, ISI mark heavy

126 type for European type/ Anglo Indian type W.C with brass 1.00 Each 291.33

C.P. bolt /hooks, testing etc. and returning the broken cover

to C.D. store if available etc. complete for all heights as per

Providing and fixing 152 mm x 152 mm size S.S.dome type

gratings/ jalee of approved quality and of required design

127 for waste pipe making and repairing sites using one's own 1.00 Each 69.02

neat cement / white cement and cleaning etc. complete for

all heights as per instructions.

Providing and fixing 15mm size brass C.P. stop cock/push

cock of 'L & K' Fiesta series or 'PLUMBER make,

approved quality or equivelent rate and quality and model

heavy type including testing & 7 years warranty , and

returning the old broken stop-cock to C.D. store if available

etc. complete for all heights as per instructions.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing 15mm size brass C.P. Angle cock of

'L & K' Fiesta series or 'PLUMBER make, approved

quality or equivelent rate and quality and model heavy type

including testing & 7 years warranty , and returning the old

broken stop-cock to C.D. store if available etc. complete for

all heights as per instructions.

Providing and fixing 15mm dia polythelene supply pipe of

130 required length upto 45cms. heavy type with C.P. hex nut 1.00 Each 65.79

& washer set approved quality …...do…..do….

Providing and fixing 32mm dia brass C.P. waste coupline

set of approved make and ISI mark quality heavy type

131 including removing existing connections and making it 1.00 Each 67.91

good and testing, returning the broken coupline to C.D.

store etc. complete for all heights as per instructions.

Providing and fixing 40mm dia brass C.P. waste coupline

set of approved make and ISI mark quality heavy

132 typeincluding removing existing connections and making it 1.00 Each 89.83

good and testing, returning the broken coupline to C.D.

store etc. complete for all heights as per instructions.

Providing & fixing waste - water pipe 32mm dia ISI quality

PVC pipe as per 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low density,

complete with special falnge compression type fittings, wall

clips etc. including making good the wall ceiling and floor

having required length with necessary PVC fittings elbow,

reducer, socket, etc. including making and repairing

hole/groove in wall/floor and grouting/ chemical solution

after testing work using one's own G.I./PVC clamps,

screws, khila with wooden piece if required and returning

old broken pipe to C.D. store if available etc. complete for

all heights as per instructions.

Do……do……but 40mm dia ……do…… (10 Kg./ sq.cm.)

Do……do…….but 50mm dia ……do…… (6Kg./ sq.cm.)

Providing and fixing PVC flexible waste water pipe of ISI

mark and approved quality for 32mm dia waste coupline

having length up to 1mtr. or of required length Including

136 removing old broken/ rusted G.I./PVC pipe and returning 1.00 Each 46.36

the same to C.D. store if available including clamping,

grouting, testing using one's own required materials etc.

complete for all heights as per instructions.

Providing and fixing to wall, ceiling and floor galvanised

Mild steel tubes B Class (Medium grade) of the following

137 nominal bore, tube fitting and clamps including making 1.00 RMT 251.10

good the wall ceiling and floor.(A) 15mm

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing to wall, ceiling and floor galvanised

Mild steel tubes B Class (Medium grade) of the following

138 nominal bore, tube fitting and clamps including making 1.00 Rmt 304.00

good the wall ceiling and floor.(B) 20mm

Providing and fixing to wall, ceiling and floor galvanised

Mild steel tubes B Class (Medium grade) of the following

139 nominal bore, tube fitting and clamps including making 1.00 Rmt 401.95

good the wall ceiling and floor.(C) 25mm

Providing and fixing to wall, ceiling and floor galvanised

Mild steel tubes (Medium grade) of the following nominal

140 bore, tube fitting and clamps including making good the 1.00 Rmt 500.97

wall ceiling and floor.(D) 32mm

Providing and fixing to wall, ceiling and floor galvanised

Mild steel tubes B Class (Medium grade) of the following

141 nominal bore, tube fitting and clamps including making 1.00 Rmt 608.35

good the wall ceiling and floor.(E) 40mm

Providing and fixing to wall, ceiling and floor galvanised

Mild steel tubes B Class (Medium grade) of the following

142 nominal bore, tube fitting and clamps including making 1.00 Rmt 794.18

good the wall ceiling and floor.(F) 50mm

Providing and laying in trenches galvanised mild steel tubes

B Class (Medium grade) of the following nominal bore, and

tube fitting (Earthwork in trenches to be measured and paid

for separately)(A) 15mm

Providing and laying in trenches galvanised mild steel tubes

B Class (Medium grade) of the following nominal bore, and

tube fitting (Earthwork in trenches to be measured and paid

for separately)(B) 20mm

Providing and laying in trenches galvanised mild steel tubes

B Class (Medium grade) of the following nominal bore, and

tube fitting (Earthwork in trenches to be measured and paid

for separately) (C) 25mm

Providing and laying in trenches galvanised mild steel tubes

B Class (Medium grade) of the following nominal bore, and

tube fitting (Earthwork in trenches to be measured and paid

for separately)(D) 40mm

Providing and laying in trenches galvanised mild steel tubes

B Class (Medium grade) of the following nominal bore, and

tube fitting (Earthwork in trenches to be measured and paid

for separately)(E) 65mm

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and laying in trenches galvanised mild steel tubes

B Class (Medium grade) of the following nominal bore, and

tube fitting (Earthwork in trenches to be measured and paid

for separately)(H) 80mm

Making connection of galvanised Mild steel distribution

branch with galvanised mild steel main 50mm to 80mm

nominal bore by providing and fixing tee including cutting

and threading the pipes complete.

Labour for carefully removing the existing G.I./ C.I./

R.C.C./ PVC pipe of any dia including allied fittings etc.

and depositing the same in C.D. store with all laboures,

150 tools, carting lifting scaffolding etc. complete as per 1.00 Rmt 61.29

instruction OR Labour for collecting and carting the above

pipes from C.D. store to new site ....do....do.... for 15 to

50mm dia pipe lines.

Labour for carefully removing the existing G.I./ C.I./

R.C.C./ PVC pipe of any dia including allied fittings etc.

and depositing the same in C.D. store with all laboures,

151 tools, carting lifting scaffolding etc. complete as per 1.00 Rmt 108.43

instruction OR Labour for collecting and carting the above

pipes from C.D. store to new site ....do....do.... for 75 to

200mm dia pipe lines.

Providing, replacing existing broken & leaking C.I./PVC

nanhi trap by providing and fixing 110mm inlet X 75mm

size outlet Finolex/ Supreme/ Prince make nanhi trap of

approved quality heavy type with PVC gratings on top

152 including making & repairing hole/groove in wall/floor 1.00 Each 572.32

including filling joint with waste pipe with adhesives

solution/ solvent cement mortar (1:1) having a neat cement

vata alround, watering, testing,cleaning the site etc.

complete for all height as per instructions.

Providing replacing existing broken & leaking C.I./PVC

Nanhi trap by providing and fixing 110mm inlet X 110mm

size outlet Finolex/ Supreme/ Prince Nanhi trap of

approved quality heavy type with PVC gratings on top

153 including making & repairing hole/groove in wall/floor 1.00 Each 585.37

including filling joint with waste pipe with adhesives

solution/solvent cement mortar (1:1) having a neat cement

vata alround watering, testing,cleaning the site etc.

complete for all height as per instructions.

Providing and fixing PVC 125mm X 110mm size P-trap of

Finolex/Supreme/ Prince make of approved quality

including filling joints with adhesives solution and solvent

cement making and repairing hole/groove including

testing,cleaning the site etc. complete for all heights as per

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing 100mm size stoneware gully trape of

approved quality including necessary brick masonary in

C.M. (1:4) and fixing trap in position including 15mm thick

155 smooth cement plaster alround and fixing 30 X30cms pre- 1.00 Each 446.38

cast cement concrete cover of approved quality on top

including making/repairing hole/groove where required,

watering,cleaning the site etc. complete as per instructions.

Constructing brick masonary chamber including necessary

excavation in earth/ soil up to 0.9mtr. depth or as per site

conditions and throwing soil as directed including laying

B.B.C.C. (1:3:6) for base @ 110mm thick and making

230mm thick masonary in C.M. (1:5) alround including

good quality bricks and making half round channel in C.C.

(1:2:4) at the bottom and 15mm thick smooth cment

156 plaster(1:4) in required line and level, finishing the same 1.00 Each 3154.23

with floating coat of neat cement slurry alround including

providing & fixing pre-cast cement concrete cover heavy

and of approved quality @ size :60 X 45cms on top

including making and repairing hole where required,

testing, watering cleaning the site, etc. complete as per

Constructing brick masonary chamber including necessary

157 excavation in earth/ soil do..do..but up to 0.75mtr. depth or 1.00 Each 1555.65

as per site conditions ..do...do...., ...do....do....

Constructing 230mm thick brick masonary for manhole

including excavation in earth/soil up to 1.50mtr. depth or as

per site conditions ….do…do….. including providing

100mm thick R.C.C. slab (1:2:4) with 8mm dia tor steel

bars @ 4" c/c. both way as directed including necessary

158 shuttering and centering and good finish on top with pre- 1.00 Each 3927.50

cast concrete cover for manhole size @ 60 X 60cm heavy

and of approved quality on top and inside measurement of

the chamber 0.75m X 0.75m including …do……do…

including pro.& fix. C.I.steps for any service in wall sides

as directed.... do...

Constructing 230mm thick brick masonary for manhole

including excavation in earth/soil up to 1.20mtr. depth or as

per site conditions ….do…do….. but without 100mm thick

R.C.C. slab and good finish on top with pre-cast concrete

159 cover for manhole size @ 60 X 60cm heavy and of 1.00 Each 2092.54

approved quality on top and inside measurement of the

chamber 0.55 X 0.55mtr. including .... do...do... making

functioning/ joining existing line/ chamber/ connection

from other drainage .....do....do....

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-

cement :2-coarse sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6-Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:3 (1-Cement : 3-coarse

sand) finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-Cement :2-

Coarse sand :4-stone aggregate 20mm nominal size)

160 finished smooth complete including curing and festing (i) 1.00 Each 11042.74

Inside size 900mm x 1200mm and 1.5M. deep including

C.I. cover with frame size 560mm diameter total weight of

cover and frame to be not less than 128 kgs. (Wt. of cover

64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick

walls of brick msonry using brick having crushing strength

not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand) (1) A type depth 0.90 Metre for

150mm diameter sewer.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-

cement :2-coarse sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6-Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:3 (1-Cement : 3-coarse

sand) finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-Cement :2-

Coarse sand :4-stone aggregate 20mm nominal size)

finished smooth complete including curing and festing (i)

Inside size 900mm x 1200mm and 1.5M. deep including

C.I. cover with frame size 560mm diameter total weight of

cover and frame to be not less than 128 kgs. (Wt. of cover

64 Kg. and Wt. of frame 64 Kg.)(A) With 230 mm thick

walls of brick msonry using brick having crushing strength

not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand) (2) B type depth

1.50 Metre for 150mm diameter sewer.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-

cement :2-coarse sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6-Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse

sand) finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-Cement :2-

Coarse sand :4-stone aggregate 20mm nominal size)

162 finishedsmooth complete including curing and festing (i) 1.00 Each 23470.48

Inside size 900mm x 1200mm and 1.5M. deep including

C.I. cover with frame size 560 mm diameter total weight of

cover and frame to be not less than 128 kgs. (Wt. of cover

64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick

walls of brick msonry using brick having crushing strength

not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand) (3) C type depth 2.25 Metre for

150mm diameter sewer

(A) With 230mm thick walls of brick msonry using brick

having crushing strength not less than 35Kg. / Sq.cm. in

Cement Mortar 1:5 (1-Cement: 5-Coarse sand) (4) D type

depth 3.15 Metre for 150mm diameter sewer.

(I) Extra rate for constructing B.B. masonry for every

164 additional depth of 0.1M. or Part thereof over item No.115- 1.00 Each 522.96

118 (I) for depth from 0.9 M to 1.5M.

(II) Extra rate for constructing B.B. masonry for every

165 additional depth of 0.1M. GR Part thereof over item No.115- 1.00 Each 397.19

118 (I) for depth from 1.50M. to 2.25M.

(III) Extra rate for constructing B.B.masonry for every

additional depth of 0.1M. or Part thereof over item No. 115-

118 (III) for depth from 2.25M to 3.15M.

(IV) Extra rate for constructing B.B. masonry for every

167 additional depth of 0.1M. or Part thereof over item No.115- 1.00 Each 653.50

118 (IV) for depth above 3.15M.

Providing and fixing cast iron steps of size

500mm x 150mm x 22.5mm and painting with two coats of

Anti-corrosive paint etc.

Supplying and fixing C.I. cover 300mm x

300mm without frame for Gulley trap

(Standard pattern) te weight of cover to be

not less 4.53 Kg.)

Constructing Brick masonry road gully

chamber 500mm x 450mm x 600mm

including 500mm x 450mm C.I. horizontal

grating wih frame complete.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Constructing Brick masonry road gully

171 chamber 450mm x 450mm x 775mm with 1.00 Each 2545.86

vertical gating complete.

Constructing brick masonry road gully

chamber 1100mm x 775mm including 500mm x 450mm

(C.I. horizontal grating with frame and vertical grating

Constructing brick masonry chamber for

underground C.I. Inspection chamber and

bends with bricks having crushing strength

not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt.

of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed

concrete etc. complete.(i)Inside dimensions 455mmx

450mm deep for single pipe line.

Constructing brick masonry chamber for

underground C.I. Inspection chamber and

bends with bricks having crushing strength

not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt.

of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed

concrete etc. complete.(ii) Inside dimensions 500mm x

450 mm deep for pipe line with one or two

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Constructing brick masonry chamber for

underground C.I. Inspection chamber and

bends with bricks having crushing strength

not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt.

of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed

concrete etc. complete. (iii) Inside dimensions 600mm x

450mm deep for pipe lines with three or

Extra over items 630 for every additional

depth of 0.1M. of part thereof beyond

450mm depth for Brick masonry chamber. (i) for 455mm x

Extra over items 631 for every additional

depth of 0.1M. of part thereof beyond

177 450mm depth for Brick masonry chamber.(ii)for 500mm x 1.00 Each 264.86

Extra over items 632 for every additional

depth of 0.1M. of part thereof beyond

450mm depth for Brick masonry chamber. (iii) for 600mm x

(A) Providing sock pit of 2.00 Cu.M. Volume including

excavating and filling brickbats with dry masonry work at

179 top for 45cm. height including covering the top with stone 1.00 Each 1370.44

including providing vatas in C.M. 1:3 with finishing curing

etc. complete as directed.

(B) Providing sock pit of 5.00 Cu.M.Volume including

excavating and filling brickbats with dry masonry work at

180 top for 45cm. height including covering the top with stone 1.00 Each 3427.65

including providing vatas in C.M. 1:3 with finishing curing

etc. complete as directed.

Labour for carefully repairing manhole chamber of @ size

60 X 45cms including raising by 2 or required layer of brick

181 work (1:6) inclusive of plaster (1:3) etc.complete with 1.00 Each 408.04

refixing existing cover watering, cleaning the site etc.

complete as per instructions.

Labour for carefully …..do…@ size 60 X 60cms including

182 raising by 2 or required layer of ……do……do… etc. 1.00 Each 459.05

complete with refixing existing cover ..do… do.…

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Labour for carefully …do…do… @ the rate 30 X 30cms.

for G.T. …do…do…

Providing and fixing precast cement concrete cover of

heavy type approved quality, tested and of size @ 30 X

184 30cm including making and repairing groove for existing 1.00 Each 64.27

kundi/chamber and necessary cementing where

required,cleaning the site etc. complete as per instructions.

185 Do…do……but size @ 45 X 60cm. …do…do… 1.00 Each 163.22

186 Do…do……but for 60 X 60cms. …..do…do…… 1.00 Each 246.86

RCC precase MH heavy duty of required size frame

suitable for 50 cm opening of MH mfd , supply, delivery

and fixing at site at store or at site of work precast RCC

M200 Frame suitable drainage MH and as per type design

187 and drawing inculding cost of reinforcement M S angle or 1.00 Each 1143.53

Flate , curing Mold work etc including making and

repairing groove for existing kundi/chamber and necessary

cementing where required,cleaning the site etc. complete as

per instructions.

RCC precase MH Heavy duty of required size Cover sutable

for 50 cm opening of MH mfd , supply, delivery and fixing

at site at store or at site of work precast RCC M200 Cover

suitable drainage MH and as per type design and drawing

188 inculding cost of reinforcement M S angle or Flate , curing 1.00 Each 1196.58

Mold work etc including making and repairing groove for

existing kundi/chamber and necessary cementing where

required,cleaning the site etc. complete as per instructions.

RCC precase MH/ Hosue conncection chamber of required

size frame mfd , supply, delivery and fixing at site at store

or at site of work precast RCC M200 Frame suitable

drainage MH and as per type design and drawing inculding

cost of reinforcement M S angle or Flate , curing Mold

work etc including making and repairing groove for existing

kundi/chamber and necessary cementing where

required,cleaning the site etc. complete as per instructions.

RCC precase MH/ Hosue conncection chamber of required

size Cover mfd , supply, delivery and fixing at site at store

or at site of work precast RCC M200 Cover suitable

drainage MH and as per type design and drawing inculding

cost of reinforcement M S angle or Flate , curing Mold

work etc including making and repairing groove for existing

kundi/chamber and necessary cementing where

required,cleaning the site etc. complete as per instructions.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing 65mm tick FRC concrete cover with

frame 600mm dia with 5" thick frame having size 32" x 32"

with necessary uniform gaps for storm water drainage

manhole including removing/ dismentalling existing C.I.

frame/ R.C.C cover etc. inlcuding cement grouting/ vata

alround/ watering, testing the work including depositing the

available C.I. material to C.D. store,cleaning the site etc. all

complete as per instructions.

Labour for repairs to existing C.I. pipes as under: Carefully

removing existing disallingned/ leaking C.I. pipes from its

original position including reallinged the same in required

192 position including making and repairing joints, using one's 1.00 RMT 135.67

own G.I. clamps, khila, etc. including testing the joints etc.

complete for all heights as per instructions for75mm dia

193 Do…do…but, for100mm dia pipe 1.00 RMT 197.90

Providing & fixing 110mm size PVC Finolex/

Supreme/Prince WC connector (to connect WC pan to soil

pipe) including making & repairing hole in wall,floor, RCC

slab where required including filling joints with chemical

solution/rich solvent cement mixture, watering, testing etc.

complete for all heights as per instructions.

Providing and fixing water closet squatting Pan (Indian type

W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste

and trap to be measured and paid for separately) (A)

Vitreous China.(I) Long pattern = White colour

Providing and fixing Kitchen sink with C.I. or M.S.

brackets, painted white including cutting holes in walls and

making good the same but excluding fittings. (C) Vitreous

China Sink.(i) 600mm x 450mm x 150mm size

Providing and fixing white glazed laboratory sink of 18" X

12" X 6" size of approved make and model (preference shall

be given to Hindware/ CERA make), first quality including

making and repairing hole and groove for new platform and

R.C.C. slab/ table top on the existing position including

removing and refixing waste coupline pipe, fixing missing

G.I. clamp, white cement grouting, vata etc. including fixing

in required line, level & position, throwing the broken Lab.

sink as directed etc. complete for all heights as per

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing white glazed laboratory sink of 24" X

18" X 8" size of approved make and model (preference shall

be given to Hindware/ CERA make), first quality including

making and repairing hole and groove for new platform and

R.C.C. slab/ table top on the existing position including

removing and refixing waste coupline pipe, fixing missing

G.I. clamp, white cement grouting, vata etc. including fixing

in required line, level & position, throwing the broken Lab.

sink as directed etc. complete for all heights as per

Providing and fixing 40X40X4mm thick M.S. angle support

of approved quality, heavy for wash basin making and

repairing groove/hole in wall with rich C.M., watering

including fixing in required line, level & position, testing

etc. complete and returning all broken support to C.D. store

if available as per instructions.

Labour for fixing available wash basin of any size and

shape including removing and refixing piller cock, waste

coupline and waste pipe connection etc. complete using

one's own neat cement for setting and white/coloured

cement at top, testing, watering, cleaning the site etc.

complete for all height etc. as per instructions.

Labour for fixing available laboratory sink of any shape and

size including removing and refixing waste coupline and

waste pipe connection etc. complete using one's own neat

cement for setting and white cement at top, testing,

watering, cleaning the site etc. complete for all heights as

per instructions.

Providing and fixing 15mm size brass C.P./ S.S. jet spray

heavy duty of approved quality and make including making

connection where required, testing etc. complete as per

Providing & fixing/replacing G.I.Union of I.S.I mark

approved quality for G.I. pipe lines one's own jute hold tight

rubber ring etc. complete for all height/ depth as per

instructions for 15mm dia.

25mm dia …do…..do…

40mm dia ….do…..do….

50mm dia …..do…..do…..

Providing and fixing Gun metal check or non-return fullway

wheel valve.(B) 20mm dia.including stopping water and

207 testing using one's own G.I. fittings of ISI mark where 1.00 Each 203.82

required and returning old broken wheel valve to C.D. store,

etc. complete for all heights as per instructions.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing Gun metal check or non-return fullway

wheel valve.(C) 25mm dia.including stopping water and

208 testing using one's own G.I. fittings of ISI mark where 1.00 Each 420.63

required and returning old broken wheel valve to C.D. store,

etc. complete for all heights as per instructions.

Providing and fixing Gun metal check or non-return fullway

wheel valve.(D) 32mm dia.including stopping water and

209 testing using one's own G.I. fittings of ISI mark where 1.00 Each 314.73

required and returning old broken wheel valve to C.D. store,

etc. complete for all heights as per instructions.

Providing and fixing Gun metal check or non-return fullway

wheel valve.(E) 40mm dia.including stopping water and

210 testing using one's own G.I. fittings of ISI mark where 1.00 Each 663.43

required and returning old broken wheel valve to C.D. store,

etc. complete for all heights as per instructions.

Providing and fixing chromium plated brass half trun flush

cock of approved quality including fixing in pipe line etc.

complete.(ii) 25mm dia.including making and repairing

hole/ groove in wall/floor etc. including stopping water and

testing, returning the old broken flush cock to C.D. store,

etc. complete for all heights as per instructions.

Providing and fixing chromium plated brass half trun flush

cock of approved quality including fixing in pipe line etc.

complete.(iii) 32mm dia.including making and repairing

hole/ groove in wall/floor etc. including stopping water and

testing, returning the old broken flush cock to C.D. store,

etc. complete for all heights as per instructions.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and laying cement based Indian type water proofing

treatment inclusive of cleaning the slab/floor by wire brush and

drench the slab with water and applying cement slurry with Sika

Latex in required proportion including cleaning, roughning and

opening the cracks in "V" groove pattern and filling the same with

C.M. (1:1) on slab/floor and providing and laying 25mm thick

layer of C.M. (1:2) mixed with water proofing compound of 'Sika',

20 Micron Nano seal make in given proportion, providing and

laying best quality,well burnt brick bats(minimum size of brick

bats 40mm) tightly and neatlyin C.M. in requiredthickness to get

proper slope and gradient at the starting point i.e. centre of terrace

or at starting of gradient(minimum thickness at water spout should

213 be 65mm) and filling the joints with C.M. (1:1) mixed with above 1.00 SQM 612.06

said water proofing compound. The top surface of brick bats shall

be finished with 25mm thick CM (1:3) mixed with above said

water proofing compound and finishing with finished coat of neat

cement slurry and making alroud vata 15 X 15cms., making chex

pattern 30 X 30cms. string impressions, watering, cleaning the site

and and testing the entire work etc. complete to work at all heights

as per the instructions. Contractor has to give 8 years of warranty

for waterproofing on Rs 300/- stamp paper.

Providing and fixing 15mm dia brass C.P.laboratory cock

(Nozle cock) of L & K make / Plumber ECONOMY with

years company warrantee approved quality and model,

Tested and …do….do..

Providing and fixing 15mm dia new bib-cock (tap) 'Prayag'

make, catalogue no.121 standard series approved quality ISI

mark or equivelent rate and quality and model heavy type

including testing 2 years warranty Tested of approved

215 model & quality including making and repairing 1.00 Each 171.44

hole/groove, etc. including stopping water and testing using

one's own G.I. Coupline elbow of ISI mark where required

and returning old broken tap to C.D. store, etc. complete for

all heights as per instructions.

Providing and fixing 15mm dia new bib-cock (tap)

laboratory cock (Nozle cock) 'Prayag' make, standard series

approved quality ISI mark or equivelent rate and quality and

model heavy type including testing 2 years warranty Tested

216 of approved model & quality including making and 1.00 Each 214.30

repairing hole/groove, etc. including stopping water and

testing using one's own G.I. Coupline elbow of ISI mark

where required and returning old broken tap to C.D. store,

etc. complete for all heights as per instructions.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing 15mm dia Pillar-cock 'Prayag' make,

catalogue no.130 standard series approved quality ISI mark

217 or equivelent rate and quality and model heavy type 1.00 Each 257.17

including testing 2 years warranty Testedapproved quality

and model, Tested …..do……do……

Providing and fixing screw down bib taps of following

size.(B) Brass chromium plated screws down Bib Tap. (i)

15mm dia.including stopping water and testing using one's

own G.I. fittings of ISI mark where required and returning

old broken tap to C.D. store, etc. complete for all heights as

per instructions.

Providing and fixing pillar tap, capstan head, screw down

high pressure with screws, shanks and back nuts.

(i) 15mm dia.including stopping water and testing using

one's own G.I. fittings of ISI mark where required and

returning old broken tap to C.D. store, etc. complete for all

heights as per instructions.

Providing and fixing C.P. brass shower rose with 15mm or

20mm inlet.(A) 100mm dia. Each of Mesco/ Mehra make /

including testing etc. complete for all heights as per

Providing and fixing 600mm x 450mm bevelled edge

mirrror of superior glass mounted on 6mm thick A.C. sheet

or plywood sheet and fixing to wooden pluge with C.P.

brass screws and washers.

Providing and applying white/ coloured cement pointing

using mixture of white cement and sika/Dr. Fixit (0.5

lit./sq.mtr.) water proofing chemical to the existing glazed

222 tiles flooring/wall dedo and inside the traps and making 1 SQM 51.01

alround vata @ the edge side including filling the joints

even and smooth and watering, cleaning with acid etc.

complete for all heights as per instructions.

Providing laying (to level or slopes) and

jointing reinforced concrete Light duty nonpressure pipes

223 I.S. class NP2 of the following internal diameter with 1.00 Rmt 356.73

collars and butt ends prepared for collar joints including

testing of joints complete. (C) 250mm

Providing laying (to level or slopes) and

jointing reinforced concrete Light duty nonpressure pipes

224 I.S. class NP2 of the following internal diameter with 1.00 Rmt 678.01

collars and butt ends prepared for collar joints including

testing of joints complete.(D) 300mm

Providing laying (to level or slopes) and

jointing reinforced concrete Light duty nonpressure pipes

I.S. class NP2 of the following internal diameter with

collars and butt ends prepared for collar joints including

testing of joints complete. (E) 450mm

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing laying (to level or slopes) and

jointing reinforced concrete Light duty nonpressure pipes

226 I.S. class NP2 of the following internal diameter with 1.00 Rmt 1252.45

collars and butt ends prepared for collar joints including

testing of joints complete. (F) 500mm

Providing laying (to level or slopes) and

jointing reinforced concrete Light duty nonpressure pipes

227 I.S. class NP2 of the following internal diameter with 1.00 Rmt 1400.92

collars and butt ends prepared for collar joints including

testing of joints complete. (G) 600mm

Providing laying (to level or slopes) and

jointing reinforced concrete Light duty nonpressure pipes

228 I.S. class NP2 of the following internal diameter with 1.00 Rmt 2212.21

collars and butt ends prepared for collar joints including

testing of joints complete.(H) 900mm

Providing laying (to level or slopes) and

jointing reinforced concrete Light duty nonpressure pipes

229 I.S. class NP2 of the following internal diameter with 1.00 Rmt 2532.77

collars and butt ends prepared for collar joints including

testing of joints complete. (K) 1000mm

Providing laying (to level or slopes) and

jointing reinforced concrete Light duty nonpressure pipes

230 I.S. class NP2 of the following internal diameter with 1.00 Rmt 3225.56

collars and butt ends prepared for collar joints including

testing of joints complete. (M) 1200mm

Providing and fixing 110mm size PVC Std. shoe of

Finolex/Supreme make including in required position

231 including making/repairing hole/groove/pipe connection 1.00 Each 51.01

where required,cleaning the site etc. complete as per

Providing and fixing 75mm size PVC Std. Cowl of

Finolex/Supreme make including in required position

232 including making/repairing hole/groove/pipe connection 1.00 Each 34.28

where required,cleaning the site etc. complete as per

Providing and fixing 110mm size PVC Std. Cowl of

Finolex/Supreme make including in required position

233 including making/repairing hole/groove/pipe connection 1.00 Each 42.85

where required,cleaning the site etc. complete as per

Providing and fixing Wash down watercloset (European

type rimless wall hung pan) Jaquar - Florentine Series or

equivalent quality with Soft Close Seat cover, inlet & Outlet

234 gasket, C.I. Chair brackets including concealed type 32 mm 1.00 Each 13715.63

metropolitan flush cock of Jaquar or equivalent quality with

Jet Spray of Jaquar or equivalent etc. complete.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing Wash down watercloset (European

type rimless wall hung pan) Hindware/CERA or equivalent

quality with Soft Close Seat cover, inlet & Outlet gasket,

C.I. Chair brackets including concealed type metropolitan

flush cock or equivalent quality with Jet Spray etc.

Providing and fixing brass C.P./ S.S. Health Faucet heavy

duty of approved quality and make including one meter tube

236 and hook making connection where required, testing etc. 1.00 Each 588.74

complete as per instructions. Approved make :

Cera,Hindware,Prayag or equivalent

Providing and fixing C.P. brass towel rail comlete with C.P.

237 brass brackets fixed to wooden plugs with C.P. brass 1.00 Each 616.42

scews.(B) 600mm x 20mm size.

Providing and fixing 600mm x 120mm glass shelf with C.P.

238 brass bracket and guard rail complete mixed to wooden plug 1.00 Each 534.82

with C.P. brass screws.

239 Providing and fixing toilet paper holder.(A) C.P. Brass 1.00 Each 427.99

Providing and fixing chromium plated, bottle trap with

necessary couplings of approved quality for wash basin.

Providing & fixing/replacing existing broken/ damaged ball

cock by providing and fixing full bore COPPER-metal ball

cock for over head tank/ sump/ water cooler tank including

testing for water discharge and returning the old broken ball

cock to C.D. store if available etc. complete for all heights

as per instructions. For 25mm dia.

Providing & fixing/replacing existing broken/ damaged ball

cock by providing and fixing full bore COPPER-metal ball

cock for over head tank/ sump/ water cooler tank including

testing for water discharge and returning the old broken ball

cock to C.D. store if available etc. complete for all heights

as per instructions. For 50 mm dia.

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [B] 20 mm.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [C] 25 mm.

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [D] 32mm.

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [E] 40mm.

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [F] 50mm.

Providing laying and jointing in true line and level 15mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings ISI make as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of

Providing laying and jointing in true line and level 25mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings ISI make as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of

Providing laying and jointing in true line and level 32mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings ISI make as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing laying and jointing in true line and level 40mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings ISI makes approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of

Providing laying and jointing in true line and level 50mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings ISI make as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of

For Wall :- Providing, laying and jointing in true line and

level 75 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be

254 fixed on wall using of 4 mm thick MS/GI z-patti clamp with 1.00 RMT 721.60

Powder coated U-Bolt ring with rubber insulation for heigh

at every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and jointed

with adhesive solvent cement including cost of all materials.

255 For Wall :- Do….do……but, for 110 mm dia pipe 1.00 RMT 843.50

256 For Wall :- Do….do……but, for 160 mm dia pipe 1.00 RMT 839.53

For Wall :- Providing and fixing 75mm dia PVC Finolex/

Supreme/ Prince type B self fit SWR PVC pipe of IS

and approved quality including using all necessary plug

type PVC fittings of 6 kg/Cm2 heavy type such as bend, tee,

'Y', cowl vent, offset etc. of 4 mm thick MS/GI z-patti

clamp with Powder coated U-Bolt ring with rubber

insulation for heigh at every with pvc back support to keep

257 pipes away from the walls, khillas, screws including making 1.00 RMT 270.33

and reapiring hole/groove in wall/ floors/ slab/beams where

required including filling the joints with chemical solution/

rich solvent cement mixture including doing testing with

water and finishing the hole/ groove in wall/ floors/

slab/beams with cement mortar etc. complete for all heights

as per instructions ......do........do.....etc. complete for all

heights as per instructions.(A) 75 mm dia

258 For Wall :- Do….do……but, for 110 mm dia pipe 1.00 RMT 414.33

259 For Wall :- Do….do……but, for 160 mm dia pipe 1.00 RMT 573.30

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

For Bore/ Trench / Road / Floor :- Providing and fixing

75 mm dia PVC Finolex/ Supreme/ Prince type B self fit

SWR PVC pipe of IS 13592 and approved quality including

using all necessary plug type PVC fittings of 6 kg/Cm2

heavy type such as bend, tee, 'Y', cowl vent, offset etc.

including making and reapiring hole /groove in wall/ floors/

260 slab/beams where required including filling the joints with 1.00 RMT 211.21

chemical solution/ rich solvent cement mixture including

doing testing with water and finishing the hole/ groove in

wall/ floors/ slab/beams with cement mortar etc. complete

for all heights as per instructions etc. complete for all

heights as per instructions.(A) 75 mm dia

For Bore/ Trench / Road / Floor :- Do….do……but, for

110 mm dia pipe

For Bore/ Trench / Road / Floor :- Do….do……but, for

160 mm dia pipe

Providing Plumber assistant labour using one's own

263 transportation and supervising labours for the various works 1.00 Each 598.93

as per given instructions by Engineer Incharge.

Providing un-skilled labours using one' own transportation

264 and supervising labours for the various works for 8 hours as 1.00 Each 510.05

per given instructions by Engineer Incharge.

Providing and fixing solid duro type plastic seat cover of

approved make, model and colour, ISI mark heavy type for

265 Wall Hang W.C with brass C.P. bolt /hooks, testing etc. and 1.00 Each 816.08

returning the broken cover to C.D. store if available etc.

complete for all heights as per instructions.

Providing and fixing 12.5 Litres low level flushing cistern

with a pair of bolts, complete with fittings such as lead

valve less syphon, 15mm nominal size brass ball valve with

polythene float, C.P

brass handle unions and couplings for connections, with

and overflow pipes, 40mm dia. porcelain enamelled flush

bend including cutting holes in walls and making good the

same connecting the flush bend with cistern and closet

(overflow pipe to be measured

and paid for separately)(A) PVC Flush Tank (I) In white

Providing and Fixing 4 mm thick MS/GI z-patti clamp with

Powder coated U-Bolt ring with rubber insulation for any

dia pipe at every heigh etc complete as per instruciton (Note

: measure z patti length )

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Labour for cleaning the under ground drainage lines up to

any depth and dia by removing silt, mud, etc. from pipe

lines by passing ropes and or steel bars from one chamber to

another chamber etc. and depositing the sludge out side the

premises, this shall be repeated till it is completely cleaned

and water flows smoothly using one"s own scaffolding,

ladders, buckets etc. complete as per instructions complete

as per instructions.

Labour for cleaning the under ground drainage lines up to

any depth and dia by removing silt, mud, etc. from pipe

lines…..do…..but by vaccum-cum- jetting - cum -

blowering machine…… do…… .

Labour for cleaning the manhole of any size and depth by

removing silt, mud and refuse. Flushing out the water,

270 taking away the silt and sludge out side the premises. This 1.00 Each 357.99

shall be repeated till it is completely cleaned up to the

bottom channel etc. complete as per instructions.

Labour for cleaning the chambers of any size and depth by

removing silt, mud and refuse. ……do……do……..do….

Labour for cleaning the Gully trap of any size and depth by

removing silt, mud and refuse. …do……do….do……

Labour for sucking/dewatering the seawage waste water

drainage water in to the chambers/manholes etc. by using

the one's own khad kuva machine set with labours, material

required with all safety major and throwing the disposable

waste water out side the University campus at all depth as

per instructions.

Labour for cleaning the manhole/ chamber of any size and

depth by using one's own Desilting machine set by

removing silt, mud and refuse, flushing out the water, taking

away the silt and sludge out side the premises. This shall be

repeated till it is completely cleaned upto the bottom

channel etc. complete as per instructions.

Labour for sucking/dewatering the seawage waste water

drainage water in to the chambers/manholes etc. by using

the one's own portable pump/machine set including fuel

with labours, material required with all safety major and

throwing the disposable waste water out side the University

campus at all depth as per instructions.(Note: Contractor

shall allowed for 1 or 2 days only in case of emergency)

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing & spreading the Gamaxin powder of standard

brand and of approved quality by Health/ Agriculture

Departmet for over flowing seawage waste water/drainage

water from the chambers/ manholes etc.to prevent major

contamination surrounding by using the one's own labour &

material required with all safety majors in University

campus at all depth as per instructions.(Note: Contractor

shall allowed for the job only in case of emergency)

Providing laying and jointing in true line and level 15 mm

dia. Industrial U.P.V.C. Pipe ( ASTM-D-1785-SCH- 80)

for cold water including fittings( ASTM -D -2467) & using

Solvant of (ASTM -D- 2564 )ISI make as approved by

277 Engineer In Charge. Pipe shall be fixed on the wall with the 1.00 RMT 136.99

help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 20 mm

dia. Industrial U.P.V.C. Pipe ( ASTM-D-1785-SCH- 80)

for cold water including fittings( ASTM -D -2467) & using

Solvant of (ASTM -D- 2564 )ISI make as approved by

278 Engineer In Charge. Pipe shall be fixed on the wall with the 1.00 RMT 159.20

help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 25 mm

dia. Industrial U.P.V.C. Pipe ( ASTM-D-1785-SCH- 80)

for cold water including fittings( ASTM -D -2467) & using

Solvant of (ASTM -D- 2564 )ISI make as approved by

279 Engineer In Charge. Pipe shall be fixed on the wall with the 1.00 RMT 199.31

help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 32 mm

dia. Industrial U.P.V.C. Pipe ( ASTM-D-1785-SCH- 80)

for cold water including fittings( ASTM -D -2467) & using

Solvant of (ASTM -D- 2564 )ISI make as approved by

280 Engineer In Charge. Pipe shall be fixed on the wall with the 1.00 RMT 287.29

help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing laying and jointing in true line and level 40 mm

dia. Industrial U.P.V.C. Pipe ( ASTM-D-1785-SCH- 80)

for cold water including fittings( ASTM -D -2467) & using

Solvant of (ASTM -D- 2564 )ISI make as approved by

281 Engineer In Charge. Pipe shall be fixed on the wall with the 1.00 RMT 345.54

help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 50 mm

dia. Industrial U.P.V.C. Pipe ( ASTM-D-1785-SCH- 80)

for cold water including fittings( ASTM -D -2467) & using

Solvant of (ASTM -D- 2564 )ISI make as approved by

282 Engineer In Charge. Pipe shall be fixed on the wall with the 1.00 RMT 448.06

help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 65 mm

dia. Industrial U.P.V.C. Pipe ( ASTM-D-1785-SCH- 80)

for cold water including fittings( ASTM -D -2467) & using

Solvant of (ASTM -D- 2564 )ISI make as approved by

283 Engineer In Charge. Pipe shall be fixed on the wall with the 1.00 RMT 703.83

help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 80 mm

dia. Industrial U.P.V.C. Pipe ( ASTM-D-1785-SCH- 80)

for cold water including fittings( ASTM -D -2467) & using

Solvant of (ASTM -D- 2564 )ISI make as approved by

284 Engineer In Charge. Pipe shall be fixed on the wall with the 1.00 RMT 855.46

help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 100 mm

dia. Industrial U.P.V.C. Pipe ( ASTM-D-1785-SCH- 80)

for cold water including fittings( ASTM -D -2467) & using

Solvant of (ASTM -D- 2564 )ISI make as approved by

285 Engineer In Charge. Pipe shall be fixed on the wall with the 1.00 RMT 959.50

help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing laying and jointing in true line and level 150 mm

dia. Industrial U.P.V.C. Pipe ( ASTM-D-1785-SCH- 80)

for cold water including fittings( ASTM -D -2467) & using

Solvant of (ASTM -D- 2564 )ISI make as approved by

286 Engineer In Charge. Pipe shall be fixed on the wall with the 1.00 RMT 1212.00

help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing and fixing /laying 110 mm dia uPVC Finolex/

Supreme/ Prince/Noble Eco-drain SN-8 Hollow core

SWR uPVC pipe with coupler of IS 16098 part 1 and

approved quality including using all necessary fittings of

etc. including making and reapiring hole /groove in wall/

floors/ slab/beams where required including filling the

joints with chemical solution/ rich solvent cement mixture

including doing testing with water and finishing the hole/

groove in wall/ floors/ slab/beams with cement mortar etc.

complete for all heights as per instructions etc. as per

instructions.(A) 110 mm dia For Bore/ Trench / Road /

Providing and fixing /laying 160 mm dia uPVC Finolex/

Supreme/ Prince/Noble Eco-drain SN-8 Hollow core

SWR uPVC pipe with coupler of IS 16098 part 1 and

approved quality including using all necessary fittings of

etc. including making and reapiring hole /groove in wall/

floors/ slab/beams where required including filling the

joints with chemical solution/ rich solvent cement mixture

including doing testing with water and finishing the hole/

groove in wall/ floors/ slab/beams with cement mortar etc.

complete for all heights as per instructions etc. as per

instructions.(A) 160 mm dia For Bore/ Trench / Road /

Providing and fixing /laying 160 mm dia uPVC Finolex/

Supreme/ Prince/Noble Eco-drain SN-8 Hollow core

SWR uPVC pipe with coupler of IS 16098 part 1 and

approved quality including using all necessary fittings of

etc. including making and reapiring hole /groove in wall/

floors/ slab/beams where required including filling the

joints with chemical solution/ rich solvent cement mixture

including doing testing with water and finishing the hole/

groove in wall/ floors/ slab/beams with cement mortar etc.

complete for all heights as per instructions etc. as per

instructions.(A) 160 mm dia For Bore/ Trench / Road /

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing /laying 315 mm dia uPVC Finolex/

Supreme/ Prince/Noble Eco-drain SN-8 Hollow core

SWR uPVC pipe with coupler of IS 16098 part 1 and

approved quality including using all necessary fittings of

etc. including making and reapiring hole /groove in wall/

floors/ slab/beams where required including filling the

joints with chemical solution/ rich solvent cement mixture

including doing testing with water and finishing the hole/

groove in wall/ floors/ slab/beams with cement mortar etc.

complete for all heights as per instructions etc. as per

instructions.(A) 315 mm dia For Bore/ Trench / Road /

290 Providing and Fixing Brass Upvc Elbow 1/2" inch 1.00 Each 107.31

Providing and Fixing Brass F.T. and M.T. (Thread) 1/2"

Providing and Fixing Brass F.T. and M.T. (Thread) 1" inch

Providing and Fixing Brass F.T. and M.T. (Thread) 1.5"

Providing and Fixing Brass F.T. and M.T. (Thread) 2" inch

295 Providing and Fixing Brass Tee 1" x 1/2" inch 1.00 Each 195.69

296 Providing and Fixing Upvc Ball Valve 1/2" inch 1.00 Each 271.44

297 Providing and Fixing Upvc Ball Valve 1" inch 1.00 Each 536.56

298 Providing and Fixing Upvc Ball Valve 1.5" inch 1.00 Each 921.63

299 Providing and Fixing Upvc Ball Valve 2" inch 1.00 Each 1098.38

300 Providing and Fixing Table Top Wash Basin 1.00 Each 2878.50

301 Providing and Fixing Long Pillar Cock 1.00 Each 877.44

Providing and Fixing Mixture Cock of Aprroved Brand with

all Material and Labour as per Engineer inchare.

Providing and fixing 3 layer PVC White tank with threded

cover at top of PLASTO RUF-TUF /OXYGEN ECO or

equivalent ISI make having 10 years guarranty , approved

quality as per required capacity, shape and design etc.

including making and repairing hole, groove, lifting,

carting, and testing with water etc. complete for all heights

as per instructions of Engineer Incharge. (A) 500 LITRES

304 Do..do...(B) 1000 LITRES 1.00 Each 9090.00

305 Do…do..(C) 1500 LITRES 1.00 Each 13635.00

306 Do…do...(D) 2000 LITRES 1.00 Each 18180.00

307 Do…do...(E) 5000 LITRES 1.00 Each 45450.00