ADDITION ALTERATION TO GCs ACCN AT IMA DEHRADUN

Amount

S&F, in repairs, Wash down water closet , complete Vitreous China wash down water closet pan (pedestal pattern), Single Piece With Side Flush Cistern For Couple805mm mm, P Trap- 180 mm white, including flush pipe and fixing bolts etc complete all as specified and directed. Make JAQUAR - VGS-WHT-81753P180UFSMZ, KOHLER 17661S-0, GROHE-39075001

Supply and fixed in repairs vitreous china WHB white table top Basin With Fixing Accessories, Size (595 x 435 x 185) mm on the plateform complete all as specified and directed. Make JAQUAR - KUS-WHT-35901, KOHLER- 28784 IN-0, GROHE-39198000

S&F in repairs Overhead Shower 105mm dia Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) Rubit Cleaning System and shower arm with flange, complete all as specified and directed. Make JAQUAR - OHS-1709, KOHLER- 23658 IN-CP, GROHE-26088000

S&F in repair two way bib cock 15mm bore with wall flange complete all as specified and directed. Make JAQUAR - QQP-7041PM, KOHLER- 25432 IN-4-CP, GROHE-20283001-20283001

Supply and fixed in repairs CP angle cock with flange cock 15mm dia complete all as specified and directed. Make JAQUAR - COP-057PM, KOHLER- 76389 IN-9-CP, GROHE-2201600

Supply and fixed in repairs CP centre hole basin mixer without Popup Waste System with 450mm Long Braided Hoses 15 mm bore for WHB, complete all as specified and directed. Make JAQUAR - QQP-7167BPM, KOHLER- 22534 IN-4ND-CP, GROHE-32848000

Supply and fixed in repairs hot & cold 15mm dia Wall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flangesr complete all as specified and directed. Make JAQUAR - QQP-7273PM, KOHLER- 20592 IN-4-CP, GROHE-23198000

Supply and fixed in repairs Toilet Roll Holder with Stainless Steel Flap complete all as specified and directed. Make JAQUAR - CAN-1153S, KOHLER- 5633IN-CP, GROHE-4005176326363

Supply and fixed in repairs corner Glass Shelf with Brackets complete all as specified and directed. Make JAQUAR - CAN-1173N, KOHLER- 5636 IN, GROHE-4005176327971

S&F, for provn Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1. metre long easy flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. Make JAQUAR - ALD-565, KOHLER- 98100IN-0, GROHE-26352000

S&F in repair Towel Rack 600mm Long Without Lower Hangers but with 3 hooks, Stainless Steel complete all as specified and directed. Make JAQUAR - CAN-1181FS, KOHLER- 17529T, GROHE-4005176430312

S&F steel doors complete incl frame, shutter, flyproof shutter and fittings, such as butt hinges, handles, sliding bolt and tower bolt etc as per manufacturers instructions complate for vearndah :- Door Frames (Conform to IS4351: 2003) and Leaves are made from Skin Pass Galvanized Iron Sheet (Conform to IS277) with high quality zinc coating of 120GSM with under mention specification complete all as specified and directed. (i) Door Levels:- Constructed from 0.8 mm (22 SWG) thick Skin pass Galvanized Iron Sheet (Conform to IS 277) formed to provide a 46mm thick fully flush, double skin door shell with Lock Seam joints at stile edges. In-fill of Honeycomb Kraft Paper is used to give the required rigidity and effective acoustic insulation (ii)DOOR FRAMES :- Constructed from 1.2 mm (18 SWG) thick Skin pass Galvanized Iron sheet (Conform to IS 277) formed to Double rebate profile as per specifications. The Door Frames may be built into the brick or block walls using corrugated “TEE” anchors not welded to the Frames (First fix). Frames may also be fixed on plastered openings with the help of Anchor Fasteners (Second Fix). Door Frames are supplied to knockdown/welded form with butt joints for Bolted Assembly at site Following test certificate shall be submitted by the manufacturer:- Door Testing Salt spray test :- 1000 Hours, UV Test :- 72 Hours, Paint Peel Off Test (impact Test), Paint Peel Off Test (Conical Mandrel Bend-6mm radius), Adhesion of Paint Test (Cross Hatch Cutter -1mm and 2mm), Scratch Hardness Test-3 Kg load FINISH :-The door frames and door shutters are primed with zinc- phosphate stoving primer and finished with Pure polyester / polyurethane powder/Epoxy Polyster for thickness 60 – 65 microns (Dry film thickness). RAL Powder is specifically procured from JOTUN/Reputed Brands.

S&F steel doors complate incl frame, shutter, and fittings, such as butt hinges, handles, sliding bolt and tower bolt etc as per manufacturers instructions complete for corridor :- Door Frames (Conform to IS4351: 2003) and Leaves are made from Skin Pass Galvanized Iron Sheet (Conform to IS277) with high quality zinc coating of 120GSM with under mention specification complete all as specified and directed. (i) Door Levels:- Constructed from 0.8 mm (22 SWG) thick Skin pass Galvanized Iron Sheet (Conform to IS 277) formed to provide a 46mm thick fully flush, double skin door shell with Lock Seam joints at stile edges. In-fill of Honeycomb Kraft Paper is used to give the required rigidity and effective acoustic insulation (ii)DOOR FRAMES :- Constructed from 1.2 mm (18 SWG) thick Skin pass Galvanized Iron sheet (Conform to IS 277) formed to single rebate / Double rebate profile as per your specifications. The Door Frames may be built into the brick or block walls using corrugated “TEE” anchors not welded to the Frames (First fix). Frames may also be fixed on plastered openings with the help of Anchor Fasteners (Second Fix). Door Frames are supplied to knockdown/welded form with butt joints for Bolted Assembly at site Following test certificate shall be submitted by the manufacturer:- Door Testing Salt spray test :- 1000 Hours, UV Test :- 72 Hours, Paint Peel Off Test (impact Test), Paint Peel Off Test (Conical Mandrel Bend-6mm radius), Adhesion of Paint Test (Cross Hatch Cutter -1mm and 2mm), Scratch Hardness Test-3 Kg load FINISH :-The door frames and door shutters are primed with zinc- phosphate stoving primer and finished with Pure polyester / polyurethane powder/Epoxy Polyster for thickness 60 – 65 microns (Dry film thickness). RAL Powder is specifically procured from JOTUN/Reputed Brands.

Demolition of cement concrete un-reinforced in ground floor and paving not exe 15 cm thickness (below or above ground floor provided for complete all as specified and directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding (but no backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling stone slab of any description or thickness in floors, aprons laid bedded and jointed in any mortar complete all as specified and directed

Demolition of reinforced cement concrete as in slabs for complete all as specified and directed.

M&L for 25mm thick plain cement concrete type B-0 1:2:4 (12.5mm graded aggregate) as in sub floors below tile etc complete all as specified and directed.

M & L for Glazed coloured ceramic tiles (joint free) in vertical surface, size (300 X 600 X 7) mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles over and including 10 mm thick rendering CM (1:4) complete all as specified and directed.

M & L for Glazed coloured ceramic tiles in vertical surface, size 200X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement tomatch coloured tiles over and including 10 mm thick rendering CM (1:4) complete all as specified and directed.

M & L for Glazed Vitrified coloured tiles as approved by GE 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed with JK Tilemaxx adhesive type -II as in screed bed as per manufacturer's instructions and pointed in white or coloured cement to match complete all as specified and directed.

M & L for Vitrified Ceramic tiles llight shade as approved by GE 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in verticle surfaces of dado / skirting etc, set and jointed with JK Tilemaxx adhesive type -II as in backing plaster and pointed in white or coloured cement to match complete all as specified and directed.

M & L for Non - skid coloured Ceramic tiles (joint free 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for Udaipur green marble work 18-20mm thick , in floors, platforms and like, laid over and incl 20 mm thick screed bed in cm (1:4) including pointing in coloured cement with admixture of pigment to match with marble shade complete all as specified and directed.

M&L for Udaipur green marble work 18-20mm thick in steps, jambs, pillars, window cills, skirting and like, laid over and incl 15mm thick rendering in cm (1:4) including pointing in coloured cement in cm (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

M&L for white marble work 18-20mm thick in steps, skirting, jambs, pillars, window cills, and like, laid over and incl 15mm thick rendering in cm (1:4) including pointing in coloured cement in cm (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

M & L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform,edge of WHB support and other similar situations complete all as specified and directed.

M & L for Complete full rounding of staircase edges with double thick patti full round moulded edges of required size. The granite/Marble treads shall be fixed with cement groove on treads and the double thick patti moulded edge shall be joined with araldite adhesive to the tread nosing. The cost shall be inclusive of cutting, moulding, transporation, edge polishing, bottom patti complete all as specified and directed.

M&L for 18-20mm thick granite (as approved colour like Z black / ruby red etc) machine cut as in floor, steps, platform and like, laid over and incl 20mm thick cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for 18-20mm thick granite (as approved colour like Z black / ruby red etc) machine cut as in self for cupboard complete all as specified and directed.

Taking down cement or cement lime plaster/brick tiles including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick ready mix external sand faced cement plaster on brick or concrete surfaces including providing & mixing water proofing compound as per manufacturers specification, surface finished, even & fair, complete all as specified and directed.

Supply only liquid water proofing compound all as specified & directed

M&L for 15mm thick ready mix internal sand faced cement plaster on brick or concrete surfaces including providing & mixing water proofing compound as per manufacturers specification, surface finished, even & fair, complete all as specified and directed.

M&L for 5 mm thick ready mix ceiling sand faced cement plaster on brick or concrete surfaces including providing & mixing water proofing compound as per manufacturers specification, surface finished, even & fair, complete all as specified and directed.

M&L for RCC (1:2:4) type B1 (Using 20mm graded crushed stone aggregate) as in slabs, shelves and the like complete all as specified and directed.

M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Mild steel TMT bars 10mm dia and above, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) area of ecah not exc 1.5 sq. m complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) area ecah exc 1.5 sq. m but n exc 4 sq. m complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m complete all as specified and directed.

BLANK

BLANK

S & F factory made 30mm thick 100% Solid WPC ( Wood polymer Composite ) Solid Plain Flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cum an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer - In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company.

Supply & fixing factory made WPC door frame 100% Solid (wood polymer composite) Size 100mm x 50 mm Single Rebated ,made from wpc material comparising of virign PVC polymer of K value 58-60 (suspension grade ) calcium corbonate and natural fibers ( wood powder/rice husk /wheat husk) minimum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasterns / hold fast of required dia and length,colour of door frame to match that of shutter all as per specifications drawings complete all as specified and directed.

S&F, factory made Steel cup board with fittings of area not exc 4.50 sq m with frame and shutter with three drawers including cabinet for drawer and open shoe rack, locking arrangement, mirror etc. with following specifications :- 1. Frames 1.25mm thick and shutters 1.0mm thick shall be made out of MS sheet. 2. Locking arrangements with two stainless steel lock and handle shall be provided on shutters. 3. All drawer shall be provided with loc, andchannel system heavy duty. 4. One SS handle of size 75mm on each drawer shall be provided. 5. Bottom portion shall be open for shoe racks in three parts. 6. Mirror of size 0.45mtr X1.20mtr with MS sheet frame shall be provided . 7. One 15mm dia stainless steel heavy duty conduit pipe with end brackets for hanger shall be provided. 8. Frame shall be fixed with dash fasteners. 9. Two coats of Hamerton spray paint of approprate colour over one coat of red oxide primer, including taking down exiting unserviceable wooden cup boards and make good the edges/ sides, complete all as specified and directed .

S&F Powder coated Aluminium section for door frame & shutters of any size like angle for jointing cleats etc all complete as specified and directed.

BLANK

S&F for 5.0 mm thick sheet glass, ordinary quality and glazing with rubber gasket and aluminium glazing clips, area in square n exc 0.5 sqm in each pane complete as specified and directed. Note: Rubber gasket and glazing clips shall be measured and paid separately.

S&F for 5.0mm thick Figured glass, pin head type and glazing with rubber gasket and aluminium glazing clips, area in square n exc 0.5 sq. m in each pane complete as specified and directed. Note: Rate for Rubber gasket and glazing clips are inclusive within the quoted rates.

Dismantling of wall/ceiling boards of any description including cover fillets etc all complete as specified and directed.

S & F in repairs Hettiach steel silver 22 mm thick of suitable size closing hinges complete all as specified and directed.

BLANK

BLANK

BLANK

BLANK

S & F in repairs 12mm thick toughened glass frameless doors with locking arrangement including stainless steel corners/brackets, cutting, polishing and bevelling all around , making holes for fixing of handles etc complete all as specified and directed.

S & F Double action door spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box ,main body with staineless steel cover, governing pivot made of brass , other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S & F for 300 mm long (20-25) mm dia stainless steel handle fixed to glass door complete all as specified and directed.

M & L 595 mm X 595mm false ceiling system , using hot dipped galvanised steel section exposed surface with precoated capping, GI powerd coated tee and cross tee of size 24x32mm & 24x27mm having 0.27mm gauge at every 600mm c/c interval and wall angle of size 19x19mm having 0.35mm gauge fixed to the wall. The above grid is tobe suspended at every 1200mm c/c in both direction using 2mm thick pre-straightened GI wire laying designer tile pre painted (high pressure steam cured) of 4 mm thickness (as per IS 14862) of size 595x595 mm and ant ine of the design e-board (cascadev or electra) , back of the tile duly sanded and finished with a coat of protective paint over the formed grid etc complete all as specified and directed

M&L Rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates incl fixing with expension fastner to roof slab including sealing of fastner by using suitable sealing compound complete all as specified and directed. Note:- The work shall be carried out in roof of triple storey bulding (Fe-290 Gde E-165)

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified complete all as specified and directed. Note:- The work shall be carried out in roof of triple storey bulding

M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified complete all as specified and directed Note:- The work shall be carried out in roof of triple storey bulding

Supply and fixed in repairs looking mirror of any size or shape 5.5mm thick, and fixed to wall with 4 No SS studs complete all as specified and directed.

S&F, in repairs, Stainless steel decorative curtain rod 25 mm bore and 2mm thick with and including brackets 02 Nos and finial 02 Nos complete all as specified and directed.

BLANK

BLANK

BLANK

S & F for Brass chromium plated towel rail 600mm size fixed in repair complete all as specified and directed. Make JAQUAR-AKP35711 PS, KOHLER-4-56301N-CP, GROHE-40459001

BLANK

Taking up or down steel of tubing 15mm bore and connections, including removal from site , complete all as specified and directed.

Taking up or down steel of tubing 20mm bore and connections, including removal from site , complete all as specified and directed.

Taking up or down steel of tubing 25mm bore and connections, including removal from site , complete all as specified and directed.

Taking up or down steel of tubing 40mm bore and connections, including removal from site , complete all as specified and directed.

Taking up or down steel of tubing 50mm bore and connections, including removal from site , complete all as specified and directed.

Supplying and laying of CPVC pipes 15mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors and proper pressure testing shall be carried out at site complete all as specified and directed.

Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors and proper pressure testing shall be carried out at site complete all as specified and directed.

Supplying and laying of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors and proper pressure testing shall be carried out at site complete all as specified and directed.

Supplying and laying of CPVC pipes 40mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors and proper pressure testing shall be carried out at site complete all as specified and directed.

S&F, PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

BLANK

Supply and fixed in repair CP grating 100mm dia and with or without hole complete all as specified and directed.

Supply and fixed in repair CP waste coupling 32 MM dia with fly nuts suitable for wash hand basin complete all as specified and directed.

Supply and fixed in repair PVC waste pipe 32 MM dia suitable for wash hand basin complete all as specified and directed.

S&F in repair Ball valves 25mm bore high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 90mm- 690 gm)

S&F in repair Gun-metal, globe or gate valves, for 25mm bore pipe with iron wheel head, screwed both ends for iron pipe and fixed

S & F 1000 ltr capacity Rotational moulded polythylene water storage tanks three layered, white, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old water tank & removing to where directed complete all as specified and as directed.

S & F 2000 ltr capacity Rotational moulded polythylene water storage tanks three layered, white, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old water tank & removing to where directed complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes 100mm bore, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes 75mm bore, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

S&F 100mm bore Hubless Centrifugally cast (Spun) soil, waste and vent pipes epoxy coated inside and out side in any length with or without ears, with EPDM rubber gasket as per manufacturers instructions, laid in trenches or in floors complete all as specified and as directed.

S&F 100mm bore Hubless Centrifugally cast (Spun) soil, waste and vent pipes epoxy coated inside and out side in any length with or without ears, with EPDM rubber gasket as per manufacturers instructions, fixed to walls, complete all as specified and as directed.

S&F 75mm bore sand Hubless Centrifugally cast (Spun) soil, waste and vent pipes epoxy coated inside and out sid in any length with or without ears, with EPDM rubber gasket as per manufacturers instructions, laid in trenches or in floors complete all as specified and as directed.

S&F 75mm bore Hubless Centrifugally cast (Spun) soil, waste and vent pipes epoxy coated inside and out side in any length with or without ears, with EPDM rubber gasket as per manufacturers instructions, fixed to walls, complete all as specified and as directed.

S&F Hubless Centrifugally cast (Spun) Bends (any radius) 100mm pipe, diminishing pieces or tapers (larger bore measured) with oval access doors, with EPDM rubber gasket as per manufacturers instructions, fixed in repairs, complete all as specified and as directed.

S&F Hubless Centrifugally cast (Spun) Bends with oval access door, (any radius) 75mm pipe, diminshing pieces of tapers (large bore measured) with EPDM rubber gasket as per manufacturers instructions, fixed in repairs, complete all as specified and as directed.

S&F Hubless Centrifugally cast (Spun) Bends (any radius) 75mm pipe, diminshing pieces of tapers (large bore measured) with EPDM rubber gasket as per manufacturers instructions, fixed in repairs, complete all as specified and as directed.

S&F Hubless Centrifugally cast (Spun) 100mm Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with EPDM rubber gasket as per manufacturers instructions, fixed in repairs, all complete as directed.

S&F Hubless Centrifugally cast (Spun) 75mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with EPDM rubber gasket as per manufacturers instructions, fixed in repairs, complete all as specified and as directed.

S&F in repairs Hubless Centrifugally cast (Spun), Cast iron 75mm diameter of floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (using 20mm graded crushed stone aggregate), complete all as specified and as directed.

M & L for Roof treatment through manufacturer /authorized applicator of the manufacturer as approved by GE by applying a coat of cold applied bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) manufactured by IWL/STP/Texas India/ Hydrotech Ltd. , laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces etc complete including taking down Sunken slab treatment, cleaning off all foreign matter by wire brushing, cleaning off surface with water and removal of spoil complete all as specified and as directed.

M&L for plain cement concrete 1:5:10, type E 2, using 40mm graded stone aggregates, finished the surfaces even and fair as in filling in sunken portion of toilet floor, complete all as specified and as directed.

M&L for plain cement concrete 1:2:4, type B 0, using 12.5mm graded aggregates, finished the surfaces even and smooth without using extra cement as in roof padding, complete all as specified and as directed.

M & L for Roof treatment through manufacturer /authorized applicator of the manufacturer as approved by GE by applying a coat of cold applied bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) manufactured by IWL/STP/Texas India/ Hydrotech Ltd. , laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces finally finished with bituminous aluminum paint @ 0.10 Kg/Sqm etc complete including taking down existing roof treatment of the RCC slab, cleaning off all foreign matter by wire brushing, cleaning off surface with water and removal of spoil complete all as specified and as directed.

M & L for Complete removal of existing treatment of wall surfaces Mechanical Sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers including cornices, pillar etc to receive putty complete all as specified and as directed.

BLANK

M & L for two coats of acrylic plastic emulsion paint over a coat of primer and including two coat of interior wall care putty on old / new plastered wall surface complete all as specified and as directed.

M & L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of berger paint or equivalent in Asian Paint, Nerolac etc) having 3 years warranty or as per manufacturers instructions which ever is more over a coat of exterior primer of same make and including two coat of external wall care putty (Make JK / Birla) complete all as specified and as prescribed by manufacture of paint and as directed. Note (i) The odd surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of distemper part. The cost of all materials, T&P, and labour required for preparation of surface are deemed to be included in the quoted rate. (ii) The work must be got executed through authorized applicator of manufacture shall be got approved from GE before commencement of work. (iii) The cost of scaffolding wherever required are deemed to be included in quoted rates.

M & L for two coats of acrylic plastic emulsion paint over a coat of primer and including two coat of interior wall care putty on new / old prepared ceiling surface complete all as specified and as directed.

M & L for Preparation of new steel surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

BLANK

BLANK

M & L for preparation of newly plastered surface of exterior wall as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of berger paint or equivalent in Asian Paint, Nerolac etc) having 3 years warranty or as per manufacturers instructions which ever is more, over a coat of exterior primer of same make and two coats external wall care putty complete all as specified and as prescribed by manufacture of paint and as directed. Note (i) The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion part. The cost of all materials, T&P, and labour required for preparation of surface are deemed to be included in the quoted rate. (ii) The work must be got executed through authorized applicator of manufacture after concluding an MoU with manufacturer for company bank guarantee by the contractor, The authorized applicator of manufacture shall be got approved from GE before commencement of work. (iii) The cost of scaffolding wherever required are deemed to be included in quoted rates.

BLANK

BLANK

BLANK

M & L for (400 x 400 x 10) mm thick exterior tile, multicolour approved shade as in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match including laid over 15 mm thick bedding layer of Cm 1:4 complete all as specified and directed

M & L for providing extra reinforcement with TMT bars 10mm dia and over as per site requirement including cranking, bending spirally for hoping for columns, hooking ends incl welding & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed.

M&L for providing, mixing & applying two component Epoxy resin concrete bonding coat on existing detoriated RCC surfaces as per manufacture specification including preparation of surface complete all as specified and directed

M&L for providing and fixing water tight centering and shuttering including bolting, strutting, propping etc. including removal of form work from column, beam etc complete all as specified and directed.

M&L for supply and apply a ready to use non shrink, cementitious free flow micro concrete up to thickness of 75mm complete all as specified and directed.

M&L for supply and apply a polymer modified cementitious bond coat, ratio polymer : water : cement of 1:4:6 by weight. Apply the patching mortar when the bond coat is tacky complete all as specified and directed.

M & L for Providing & fixing shear connectors of 8mm dia TOR steel up to 160mm length with anchor Fix ®-3+ / Mungo / Flscher FISV 390 / Hilti RE - 500 Epoxy resin RCC members including power drilling, Cleaning of holes insertion of epoxy, placing shear connectors in position to insure the bond as per manufacture recommendation complete as per site requirement complete all as specified and as directed.

M&L Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including rilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

M&L Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

M&L Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 tre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

M & L for Dismentaling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F in repair stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement. Height of railing min 120 cm, vertical post of dia not less than 65 mm with ornamental top, at the interval of not more than 1.2 m, top rail 65 mm dia and middle rails min 2 Nos. not less than 25 mm dia, pattern all as approved by GE complete all as specified and directed.

M&L for 100 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in hard standing complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C-2, (using 40 mm thick graded stone aggregate) as in plinth protection and finishing even and smooth without using extra cement incl making joints 12 mm wide of full depth of PCC at every 3 meters and at every change in direction and filling the same with sealing compund grade 'A' incl necessary formwork. Complete all as specified and directed.

S&F in repair 40mm dia stainless steel (Grade 304) made of Hollow tubes, including welding, grinding, buffing, polishing all as approved by GE complete all as specified and directed.

S&F in repair 40mm dia stainless steel (Grade 304) made of Hollow tubes, knobs / caps including welding, grinding, buffing, polishing all as approved by GE complete all as specified and directed.

S&F in repair 25mm dia stainless steel (Grade 304) made of Hollow tubes, including welding, grinding, buffing, polishing all as approved by GE complete all as specified and directed.

S&F in repair 25mm dia stainless steel (Grade 304) Hollow tubes knob/cap, including welding, grinding, buffing, polishing all as approved by GE complete all as specified and directed.

S&F in repair 450mm stainless steel normal Telescopic channel for drawer sliding complete all as specified and as directed.

BLANK

M & L for Providing precast cement concrete louvres and jallies Type B0 1:2:4 (12.5mm (12.5mm graded graded graded graded aggregate), 50mm thick (measured solid) Set in cement mortar Set in cement mortar 1:4, including all mould- ings but excluding frame including desmentaling existing jali complete all as specified and as directed.

M & L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete including removing old blocks complete all as specified and as directed.

S & F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick pre laminated moulded shutter for bathroom cupboard. The laminated shutter should be 10 mm deep mould on the pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.

S&F in repair Stainless Steel handles 125mm, fabricated type, anodised complete all as specified and as directed.

M&L for One coats of anti corrosive spray paint with teak wood grains finish by mechanical meothad to old steel surface incl preparation of old painted surface complete all as specified and as directed.

M&L for PCC type D- 2, 1:4:8 using (40mm graded aggregate)as in foundation and mass concrete all as specified and directed.

M & L for Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Windowprofile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Slidingmesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drillingof holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed tothe wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) Area exceeding 2.00 sqm each complete all as per specified and directed.

S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

BLANK

BLANK

M & L for Disconnecting existing tanks capacity exc 500 ltr and nexc 1000ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and doisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and as directed.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.5 metre deep and getting out of hard/dense soil for manhole and sewage line. complete all as specified and as directed.

Demolition of plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

BLANK

Demolition and breaking up drain pipes 150mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.

BLANK

M&L for Concrete bed type C-2 1:3:6 for drain pipes of 150mm bore including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed

M & L for brick work with old size sub class B brick straight or curved on plan exc. 6.00 M mean radius built in CM 1:4 complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming hard dense soil in layers not exc 25 cm complete all as specified and directed

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed

S&F 150mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed/benching to manhole complete all as specified and directed

M&L for Extra for forming fair finished drain or channel 30 cm inner girth on cement concrete using extra cement incl forms, mould etc complete all as specified and directed

Add or deduct for each 25 mm girth or part thereof over or under 30 cm for forming fair finish drain or channel in cement concrete including forms, moulds, mitred, stopped ends, complete all as specified and directed

M & L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in coping including all necessary form work complete all as specified and directed

M&L for Rendering 15 mm thick in CM 1:4 on brick surfaces of Manhole and finished the surface even and smooth without using extra cement using WPC complete all as specified and directed Note (WPC Shall be meassured in separate item).

Supply only integral water proofing compound complete all as specified and directed

M & L for factory made Pre-cast cover slab for Manholes and drains of RCC 1:2:4 type B1 using 20 mm graded stone aggregate & set in CM 1:4. complete all as specified and directed complete all as specified and directed. Notes : Reinforcement shall be measured masured and paid seperately

BLANK

M&L for cement concrete type C-2 1:3:6 (using 20 mm graded stone aggregates as in surface channels and drains complete all as specified and as directed.

M&L Extra for forming fair finished drain or channel for 45 CM inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi-tred/stopped ends etc. complete all as specified and as directed.

Add or deduct on above item for each 25 mm girth or part thereof over or under 30cm ditto complete all as specified and as directed.

BLANK

M & L for ball catches with 8mm dia steel ball brass body and striking plate including cutting in and fixed complete all as specified and directed.

M & L for 2mm thick and 100 mm wide PVC dividing strip for flooring & hardstanding complete all as specified and directed.

M & L for (18-20) mm thick granite (of any type as approved colour) machine cut as in risers, laid over 10mm thick plaster in CM 1:4 & pointed with white cement & admixture of pigment to match the shade of granite stone including grinding & polishing complete all as specified and directed.

M & L for full body vitrified tiles 600 x 600 mm and 9-10mm thick as in floor fixed with JK Tile maxx type-II as in screed bed as per manufacturers instructions and pointed with cement with add mixture of pigment to match the shade of tiles complete all as specified and directed.

M & L for full body vitrified tiles 600 x 600 mm and 9-10mm thick as in skirting fixed with JK Tile maxx type-II as in screed bed as per manufacturers instructions and pointed with cement with add mixture of pigment to match the shade of tiles complete all as specified and directed.

Roughening of surfaces of old concrete floor / wall by picking, sweeping clean and washing down with weater to remove dust etc complete all as specified and directed.

M & L for 10mm thick plaster in cement concrete mortar 1:3 using water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement complete all as specified and directed.

Taking down carefully existing aluminum/copper surface/concealed point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, lamp holder, regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces in CM 1:3 of walls, floors, ceiling etc including painting if required to match up with existing surfaces complete all as specified and directed.

M&L point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS-H grade in and including medium duty concealed PVC conduit 20 mm dia or higher and conduit fittings and all accessories with suitable size of Metal flush box zinc oxide plated of suitable for mounting of modular switches, sockets, fan regulator etc with modular plate and frame of 01 module to 18 module as required at site, including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS-H grade, green colour, up to common earth and connected to earth dolly compete all as specified and directed of the following. Note : 1. Point wiring should be carried out on surface mounted rigid PVC conduit or casing-caping on existing RCC beam, column, roof or false ceiling. 2. Colour code will be maintained as per IE rule i.e. Red/Yellow/Blue for phases, Black for Neutral and Green for earth wire. 3. Cost of Modular Metal flush box, modular plate and frame deemed to be included in quoted rate for point wiring and the make and model and size i.e, No of modules, for all modular items will be approved by GE. 4. Make of Modular metal flush box, modular plate and frame, switch, socket, regulator, bell push should be same & colour of frame switches match up with the surrounding. 5. Switch, socket, regulator, bell push will be measured and paid under respective item.

One light/bell point point controlled by one 1-way modular switch.

One ceiling fan/Exhaust fan point controlled by one 1-way switch.

One three pin 5 Amp socket on same board.

One three pin 5 Amp socket on independent board

One light point controlled by two 2-way modular switches.

All as per item No 174.0 above but one 3 pin socket outlet 15 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm.

All as per item No 174.0 above but with 4sqmm copper conductor cable with 4 sqmm PVC copper conductor cable as earth continuity conductor for one socket outlet 15/16 amps (AC/geyser) on independent board all as directed.

M&L New point wiring with PVC insulated unsheathed electric cable 1100 volts grade single core, FRLS-H grade having multi stranded copper conductor of 1.5 sqmm nominal cross sectional area drawn in and including medium duty concealed PVC conduit 20 mm dia or higher and conduit fittings and all accessories with 1.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable in green color upto common earthnand connected to dolly complete FRLSH as continuous earth conductor by providing suitable lugs with inner and outer frame plate matching with surrounding with sunken steel boxes zinc oxide plated of suitable size for mounting modular switches sockets, etc complete for the following Note : 1. Point wiring should be carried out on surface mounted rigid PVC conduit or casing-caping on existing RCC beam, column, roof or false ceiling. 2. Colour code will be maintained as per IE rule i.e. Red/Yellow/Blue for phases, Black for Neutral and Green for earth wire. 3. Cost of Modular Metal flush box, modular plate and frame deemed to be included in quoted rate for point wiring and the make and model and size i.e, No of modules, for all modular items will be approved by GE. 4. Make of Modular metal flush box, modular plate and frame, switch, socket, regulator, bell push should be same & colour of frame switches match up with the surrounding. 5. Switch, socket, regulator, bell push will be measured and paid under respective item.

One light point controlled by one 1-way modular switch.

One bell / buzzer point controlled by one 1-way modular switch.

One ceiling / exhaust fan point controlled by one 1-way modular switch.

One three pin 5 Amp socket on same board

One three pin 5 Amp socket on independent board

All as per item No 182.0 above but one 3 pin socket outlet 15 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm.

S&F Lamp holder B22 type, PVC/Polycarbonate type angular / straight type complete all as specified and directed..

S&F modular switch 1 way 6A, 1 Module complete all as specified and directed.

S&F modular socket 6A, 3 pin combined 2 Module complete all as specified and directed.

S&F modular switch 1 way 16A, 1 Module with indicator lamp complete all as specified and directed.

S&F modular socket 6A/16A, 3 pin combined 2 Module complete all as specified and directed.

S&F modular switch 2 way 6A, 1 Module complete all as specified and directed.

S&F modular bell push 6A, 1 Module complete all as specified and directed.

S&F ding dong bell AC 230 V single pole complete all as specified and directed.

S&F modular fan regulators step type 2 module 120W complete all as specified and directed.

S&F ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 230 V AC complete all as specified and directed.

BLANK

BLANK

BLANK

BLANK

BLANK

BLANK

Supply & fix Wall mounted LED AC decorative box type fitting, 22 W, 230 volts AC,T-8, cool white not less than 1200mm extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver with and including 22 W LED tube rod complete and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to walls including taking down existing fitting complete all as specified and directed. Note:- Minimum 2 year warranty or as per manufacturer recommendation which ever is more shall be provided by the contractor after completion of work for LED fittings and electronic devices.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220V AC decorative type, Body Aluminium Die Cast, Body Color Chrome with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. (Design of wall lights will be approved by the User/GE) Note:- Minimum 2 year warranty or as per manufacturer recommendation which ever is more shall be provided by the contractor after completion of work for LED fittings and electronic devices.

S&F LED light fitting 1 x 07 Watt picture wall light with driver, Bronze finish for superior feel Metallic body, Warm White 3000K with good Color rendering (CRI>80), Flexible neck for adjusting beam, product dimension 14 L x 7.1 W x 3.7 H Centimeters connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Note:- Minimum 2 year warranty or as per manufacturer recommendation which ever is more shall be provided by the contractor after completion of work for LED fittings and electronic devices.

S&F in replacement of LED inverter bulb 12 watt WW retrofit type works on AC Normal mode and DC supply in inverter mode with inbuilt battery back up of up to 4 hours, high efficiency high lumens output complete all as specified and directed. Note:- Minimum 2 year warranty or as per manufacturer recommendation which ever is more shall be provided by the contractor after completion of work for LED fittings and electronic devices.

S&F LED decorative wall light 20W luminaires including LED light driver holder and warm white bulb of suitable size 2 nos connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. (Design of wall lights will be approved by the User/GE) Note:- Minimum 2 year warranty or as per manufacturer recommendation which ever is more shall be provided by the contractor after completion of work for LED fittings and electronic devices.

S&F LED wall mounted metal and Synthetic LED Bedside Black study lamp 3.0W, adjustable arm including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Note:- Minimum 2 year warranty or as per manufacturer recommendation which ever is more shall be provided by the contractor after completion of work for LED fittings and electronic devices.

Supply and fixing Round recess mounted LED down light 12 W fitting made up of pressure die cast aluminium body having minimum 1200 lumens with the efficacy of 100lm/watt. LED must be of CRI 80 and life class 50000 hrs. Driver must have PF 0.95 & THD<10%. IP & IK Rating 02. suitable for Armstrong/Grid ceiling Minimum Two years warranty should be provided and certificate should be endorsed by OEM or his representative complete all as specified and directed. Note :- Design of lights will be approved by the User/GE Note:- Minimum 2 year warranty or as per manufacturer recommendation which ever is more shall be provided by the contractor after completion of work for LED fittings and electronic devices.

Supply and fixing Panel light 4'x1' 28 watt, 220V AC surface type with high efficiancy SMD LED & PMMA diffuser soft glare free light complete with drivers, LED lamp suitable for roof, including connecting up with driver three core flexible copper conductor case of suitable size complete all as specified and directed. Note :- Design of lights will be approved by the User/GE Note:- Minimum 2 year warranty or as per manufacturer recommendation which ever is more shall be provided by the contractor after completion of work for LED fittings and electronic devices.

Supply and fixing 2'x2' fully diffused recess mounting LED luminaire made up of CRCA body having minimum 3600 lumen with efficacy of 120 lm/watt. LED must be of CRI 80 & UGR <19 and life class 50000 hrs. Driver must have surge protection of 2.5KV, PF 0.95 & THD<10%. IP & IK Rating 02. suitable for Armstrong/Grid Ceiling complete as required includung all connections with three core flexible copper conductor cable of suitable size, Minimum Two years warranty should be provided. Warranty certificate should be endorsed by OEM or his representative complete all as specified and directed. Note :- Design of lights will be approved by the User/GE Note:- Minimum 2 year warranty or as per manufacturer recommendation which ever is more shall be provided by the contractor after completion of work for LED fittings and electronic devices.

Taking down fan ceiling, disconnecting cables, removing fan, blades and deposited to E/M store yard complete all as specified and directed. Note :- The rate for transportation/loading/unloading/labour upto MES store yard are deemed to be included in the quoted rates.

S&F ceiling fans 230V, 1200mm sweep Minimum air delivery 210 CFM with service value 6.00 BEE with BLDC Motor,three blades, down rod upto suitable length, canopy, three core flexible copper conductor of 1.5sqmm size, electronic regulator and accessories complete all as specified and directed. Note :- (1) Colour of ceiling fan will be approved by User/GE. (2) Minimum 2 year warranty or as per manufacturer recommendation which ever is more shall be provided by the contractor after completion of work for repair or replacement of ceiling fan.

S&F exhaust fan mettalic body copper wound AC single phase 230 V of size 300 mm sweep with blades, frame and louvers complete all as specified and directed.

Taking down carefully geysers from site including taking out existing grounting bolts, nuts, bolts and washers and deposited to E/M store yard complete all as specified and directed. Note :- The rate for transportation/loading/unloading/labour upto MES store yard are deemed to be included in the quoted rates.

S&F Sheet metal enclosure, single pole and neutral with two pin and earth plug and socket including inbuilt MCB SPN 20A for protection of appliances like AC/Geyser suitable for flush mounting and surface mounting complete all as specified and directed.

Supply and fix electric water heater stoarage type steel body with Steel alloy inner tank & heating element upto 2KW capacity 25Ltr, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, Connection pipe 450 mm long 304 grade braided stainless steel connection suitable for hot & cold water supply with cromium plated brass screwed nuts at both ends with washers complete all as specified and directed.

Taking down sub main wiring of any size and type in PVC concealled conduit/surface/casing caping removing to stores or taken as credit and making good the disturbed surfaces of wall/ceiling/roof etc complete all as specified and directed.

M&L for Sub main wiring with 2 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sq.mm. (nominal area) drawing in and including suitable size dia of PVC conduit medium duty concealed/surface (column/beam/ roof) conduit heavy duty accessories and fittings with chasing/cutting complete with 1 run of copper conductor multistranded of size 4.0 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed. Note: (i) Note:- two runs of 4.0 sqmm cable and one run of 4.0 sqmm cable as earth wire and one run of PVC conduit will be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface with using PVC rawl plugs etc.

M&L for Sub main wiring with 2 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 6.0 Sq.mm. (nominal area) drawing in and including suitable size dia of PVC conduit medium duty concealed/surface (column/beam/ roof) conduit heavy duty accessories and fittings with chasing/cutting complete with 1 run of copper conductor multistranded of size 6.0 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed. Note: (i) Note:- two runs of 6.0 sqmm cable and one run of 6.0 sqmm cable as earth wire and one run of PVC conduit will be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface with using PVC rawl plugs etc.

Supply, laying, fixing on wall / ceiling / under floor and testing of LT cable PVC insulated, sheathed, stranded copper conductor cable 4 core, 10 sqmm size, complete with fixing arrangement saddle, nut bolt / screw / necessary fasteners etc all as directed.

BLANK

S&F in replacement of distribution boards epoxy powder coated TP & N 12 ways (VTPN MCCB DB) with metal door (IP 54 IK 09 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 40 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 63/100/125 Amps as incomer and 36 SP MCBs or 12 TP MCBs (or any combination of SP/TP MCBS) for outgoings complete including disconnecting and taking down existing DB complete all as specified and directed. (For Main DB at stair case of 03 bldgs) Note: (i) MCCB 4P 250A, 36 KA magnetic release incoming MCCBs will be measured and paid seperately. (ii) The outgoing MCB will be measured and paid separately under relavant items of this schedule.

S&F MCCB 415 Volt 36 KA 4 Pole for VTPN DB 12 way incomer 250 Amp magnetic release adjustable range as imcoming with fixing arrangement complete all as specified and directed.

S&F MCB 415 Volt 16 KA TP 100 Amp 'B' series magnetic release adjustable range as outgoing with fixing arrangement complete all as specified and directed.

S&F in replacement of distribution boards epoxy powder coated TP & N 04 ways (VTPN MCCB DB) with metal door (IP 54 IK 09 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 40 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 63/100/125 Amps as incomer and 12 SP MCBs (or any combination of SP/TP MCBS) for outgoings complete including disconnecting and taking down existing DB complete all as specified and directed. (For Main DB at stair case of 03 bldgs) Note: (i) MCCB 4P 100A, 25 KA magnetic release incoming MCCB will be measured and paid seperately. (ii) The outgoing MCB will be measured and paid separately under relavant items of this schedule.

S&F MCCB 4 pole 415 Volt 25 KA 100 Amp for VTPN DB 4 way incomer magnetic release adjustable range as incoming with fixing arrangement complete all as specified & directed .

S&F MCB single pole 240 Volt 10 KA 63 Amp 'B' series conforming to ISI marked complete for outgoing all as specified & directed .

S&F in replacement sheet metal enclosures 240 volt with 200 amps rated copper bus bar for double door 8 way IP-43DB's lk-09 suitable for one MCB SPN as incoming and 6 MCB SP as out going, mounting flush on wall and making good disturbed surfaces complete all as specified and directed by Engr-in-charge ,including taking down old unserviceable DBs complete all as specified & directed . (MCBs shall be measured and paid separately).

S&F in replacement sheet metal enclosures 240 volt with 200 amps rated copper bus bar for double door 4 way IP-43DB's lk-09suitable for one MCB SPN as incoming and 2 MCB SP as out going, mounting flush on wall and making good disturbed surfaces complete all as specified and directed by Engr-in-charge ,including taking down old unserviceable DBs complete all as specified & directed . (MCBs shall be measured and paid separately). For Cycle stand.

S&F MCB Single pole and neutral 240 Volt 10 KA 63 Amp 'B' series conforming to ISI marked complete all as specified & directed .

S&F MCB single pole and neutral 240 volt 10 KA 6-32 Amp 'B' series conforming to ISI marked all as specified and directed .

M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mm x 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plate using 4 mm dia GI earth lead wire as earth lead moulded and rivetted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead protected in and including 15 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-II 2010 and testing on completion all as specified and directed. (Note 09 Units for Internal Electrification and 02 units for External Electrification)

M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised steel or iron wire complete all as specified & directed . (Note 90 Units for Internal Electrification and 40 units for External Electrification)

M&L for TV Wiring with Co axial RG-6 heavy duty PVC insulated, PVC sheathed cable having single strand of 0.7 mm dia taped in concealed PVC conduit suitable for television wiring including all necessary connections from terminal box to TV socket, drawn in separate concealed PVC conduit complete all as directed.

M&L for Telephone Wiring with 0.5 mm dia FRLS-H, 2 pair PVC insulated annealed copper conductor, unarmored telephone cable in the existing concealed PVC conduit suitable for television wiring including all necessary connections from terminal box to socket, drawn in separate concealed PVC conduit complete all as specified & directed .

M&L in replacement for LAN Wiring with UTP CAT 6 computer LAN Cable with star seperater PVC insulated, PVC sheathed cable having single strand suitable for LAN wiring including all necessary connections from terminal box to Telephone socket, drawn in separate concealed PVC conduit complete all as specified & directed .

M & L in replacement for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth. complete all as specified and directed.

M & L for rigid non metallic PVC conduit of 20 mm dia inclusive of all tees, bends elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc but exclusive junction/terminal boxes for computer/TV/telephone/LAN networking and communication system complete all as specified & directed.

S&F Modular TV socket 01 Module size socket with inner and outer frame plate matching with surrounding for mounting modular TV socket as per site requirement complete all as specified & directed .

S&F Modular Telephone socket (RJ 11 Socket Jack) 01 Module size socket with inner and outer frame plate matching with surrounding for mounting modular Telephone socket as per site requirement complete all as specified & directed .

S&F in replacement Modular LAN socket (RJ 45 Computer Socket Cat 6) 01 Module size socket with inner and outer frame plate matching with surrounding for mounting modular LAN socket as per site requirement complete all as specified & directed .

S&F in replacement Metal flush box zinc oxide plated 2 module for mounting modular TV/Telephone/LAN socket complete all as specified and as directed by Engr-In-Charge.

Supply install testing and commissioning of 16 PORT Patch Panel complete with accessories and RJ 45 plug etc, as specified and required for complete connection complete all as specified & directed .

S&F in replacement LED post top lantern 30W with die cast aluminium spigot, spun aluminium powder coated top cover, PDC heat sink, opal diffuser and clear acrylic, IP 65 with driver including connection complete flexible copper cable of size 2.5 sqmm 3 core complete all as specifeid and as directed.

Supply and Fix in replacement LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specifeid and as directed.

Supply and fixing in replacement LED flood light 210 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection with 30 degree projection in colour tempreture 3000K with impact and corrosion resistant complete with driver and lamp complete all as specifeid and as directed.

Supply and fixing in replacement LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection with 30 degree projection in colour tempreture 3000K with impact and corrosion resistant complete with driver and lamp complete all as specifeid and as directed.

Supply & fixing LED spike light 5-12 watt weatherised IP65 complete all as specified and directed.

Supply & fixing LED-Ground: Ground Burial light 18Watt, 240Volts Compact and robust design with diecast aluminium housing and stainless trim, IP68 waterproof connectors complete all as specifeid and as directed.

M&L in replacement sub main wiring with 2 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 2.5 Sq.mm. (nominal area) drawing in and including 20/25mm. dia PVC conduit medium duty concealed/surface (column/beam/ roof) conduit heavy duty accessories and fittings with chasing/cutting complete with 1 run of copper conductor multistranded of size 2.5 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed including taking down old sub main wiring.

Supplying, laying in replacement, jointing and testing LT underground cable of size 10 sqmm 4 core heavy duty, 1100 Volts, PVC insulated and sheathed, armoured with multi-stranded aluminium conductor cable conforming to latest IS , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/ drains/culverts duly protected in galvanised steel pipe of suitable sizes all bare conductor of cable duly insulated 1.1 KV grade heat shrinkable sleeve including cable gland and lugging etc at both ends all complete all as specified and directed.

S&F fuse box sheet metal enclosure made out of MS sheet not less then 02 mm thick factory fabricated front openable duly painted and of size (300 x 250 x 100) mm having bakelite connector and aluminium bus bar of suitable for 3 phase and neutral link including MCB SP 6 amps gunmetal cable gland for LT cable fixed to pole with MS 25X3 mm GI clamps made to shape with required nut bolt washers etc. for street light / out door light fittings complete all as specifeid and as directed.

Supply, install, testing, Commissioning of automatic street light control system of 25A suitable for automatic switching of Street lights of 240V, 50Hz, Controller shall have following function -(a) Controller shall be automatically switch on the street lights as programmed time setting and astro function. (b) Controller shall be automatically switch off the street lights as programmed time setting. Following Components shall be fitted in a enclosure, wired and programmed for complete function. 1 No. 25A, 4pole MCB in thermal magnetic release for overload and shortcircuit protection. 1Nos 3 position (auto - off- manual) 25A, 4pole modular type contactors. Phase indication Lamps R+Y+B 230/400V, Astonomical time switch of Switching Capacity 16A, ohmic 250V AC, at PF-1, having minimum running reserve 5 years/43800 hours and clock precision 0.1sec./day, having facility of location programing by city name or geographical coordinates , offset time +/- 120 minute relative to sunrise/sunset.

M&L for Returning, filling in excavated soil in trenches including spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.

M&L for Removing of excavated soil to a distance n. exc. 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for laying local dry clean sand filling for cushioning in trenches around under ground cable complete all as specified and directed.

M & L for Plain cement concrete 1:2:4 type B1 using 20mm graded aggregate for coping to pole foundation including necessary form work with fair finished surface all as directed.

Supplying and laying Bricks common burnt clay building bricks, old size sub-class ‘A’ designation 75 in trenches as protection of under ground cable all as specified and directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 50 mm (2”) dia for fixing post top lantern and road crossing/Water Supply complete all as specifeid and as directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 40 mm (1.5”) dia complete all as specifeid and as directed.

M & L for painting of steel tubular 7.5m long poles after preparing old paint surfaces with two coat of aluminium paint and two coats of zebra marking with enamel paint from ground level & upto 1m height including white washing the coping and cleaning the brushes surrounding the pole bottom up to 1m radius complete all as specified and as directed.

M & L for GI tubes, light grade, galvanised of size 50mm, with all fittings laid in trenches for road crossing in cable laying / street light poles complete all as specified and as directed.

S & F of steel metal flexible conduits, for outdoor use outer diameter 16mm to 25mm complete all as specified and as directed.

M & L for PVC insulated and FR PVC Round sheathed, copper conductor (flexible) industrial cable, 1100 volt, 2.5 sqmm x 2.0 core confirming to IS 694 for connection of flood lights and burial lights complete all as specified and as directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (1”) dia complete all as specifeid and as directed.

Note : Tenderers may note that amount of credit Rs 12,02,333.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

Onkar Nath Bhalla And Sons Contractor Pvt. Ltd.

Siya constructions

Third Wave Services Pvt Ltd

B D Raizada Projects Pvt Ltd

JASPAL SINGH & CONST

SAWHNEY BUILDWELL LLP

Ms dev associates

J.D.Builders