Construction of New 18 Courts building (G.F. + 7 floors) for Chief Judicial Magistrate Court at Gheekanta, Ahmedabad.

No. But may be In Figure Estimated

more or less In words Quantity

1 Excavation for foundation upto 1.50 mt depth including sorting out and 2700.00 Cu.M. 117.08 Rupees One Hundred

stacking of useful materials and disposing the excavated stuff with all Seventeen And Paise

Cu.M. Eight Only

(A) Loose or soft soil

2 Excavation for foundation 1.50 mt to 3.00 mt depth including sorting out 2156.00 Cu.M. 162.38 Rupees One Hundred

and stacking of useful materials and disposing the excavated stuff with all Sixty Two And Paise

Cu.M. Thirty Eight Only

(B) Dense or hard Soil

3 Excavation for foundation 3.00 mt to 5.00 mt depth including sorting out 2487.00 Cu.M. 285.73 Rupees Two Hundred

and stacking of useful materials and disposing the excavated stuff with all Eighty Five And Paise

Cu.M. Seventy Three Only

(C) Hard Murrum

4 Excavation for foundation 5.00 mt to 7.00 mt depth including sorting out 38.00 Cu.M. 343.80 Rupees Three Hundred

and stacking of useful materials and disposing the excavated stuff with all Forty Three And Paise

Cu.M. Eighty Only

(C) Hard Murrum

5 Filling available excavated Earth (Excluding Rock) in trench plinth side of 4932.00 Cu.M. 130.39 Rupees One Hundred

foundation in layer not excluding 20 cm in depth consolidation each Thirty And Paise Thirty

Cu.M. Nine Only

deposited layer by ramming and watering etc. complete.

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

in thickness including ramming watering and consolidating etc. complete. Eighty Nine And Paise

Cu.M. Six Only

7 Carrying out plinth treatment to post construction / existing structure by 1145.00 Sq.Mt. 105.95 Rupees One Hundred

spraying chemical solution for termite control treatment including labour Five And Paise Ninety

Sq.Mt. Five Only

and material consistent with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Concentration Weight one

percent is recommended i.e one litre 20 EC chemical emulsion with

liter give 1 % concentration inclusive of one litre chemical emulsion

application at the rate of 5 Litre chemical / Sq.Mt of surface is

recommended as per I.S.

8 Filling in plinth with sand under floors including watering ramming, 469.90 Cu.M. 460.19 Rupees Four Hundred

consolidating and dressing etc. complete. Sixty And Paise

Cu.M. Nineteen Only

9 Providing and laying in position Ready Mixed M-150 grade concrete for 166.00 Cu.M. 4086.87 Rupees Four Thousand

plain cement concrete work, using cement content as per approved Eighty Six And Paise

Cu.M. Eighty Seven Only

Design Mix Without Fly Ash manufactured in fully automatic batching

plant and transported to site of work in transit mixer for a lead upto

kms having continuous agitated mixer, manufactured as per mix design

of specified grade for reinforced cement concrete work including pumping

of R.M.C. from transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering, shuttering, finishing and

admixtures in recommended proportions as per IS:9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in-charge for reinforced

concrete work in

PCC Below Foundation and Plinth Beam

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

10 Providing and laying in position Ready Mixed M-350 grade concrete for 1624.00 Cu.M. 5448.88 Rupees Five Thousand

reinforced cement concrete work, using cement content as per approved Four Hundred Forty

Cu.M. Eight And Paise Eighty

Design Mix Without Fly Ash manufactured in fully automatic batching

plant and transported to site of work in transit mixer for a lead upto 10 Eight Only

kms having continuous agitated mixer, manufactured as per mix design

of specified grade for reinforced cement concrete work including pumping

of R.M.C. from transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering, shuttering, finishing and

admixtures in recommended proportions as per IS:9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in-charge for reinforced

concrete work in Foundation and Footing

Raft Foundation

11 Providing and laying controlled cement concrete M-350 and curing 185.00 Cu.M. 7701.19 Rupees Seven

complete including the cost of form work but excluding the cost of Thousand Seven

Cu.M. Hundred One And Paise

reinforcement for reinforced concrete work in

Columns upto First Floor Level. Nineteen Only

12 Providing and laying controlled cement concrete M-300 and curing 165.00 Cu.M. 7722.51 Rupees Seven

complete including the cost of form work but excluding the cost of Thousand Seven

Cu.M. Hundred Twenty Two

reinforcement for reinforced concrete work in

And Paise Fifty One

Columns From 2nd Floor Level to 4th Floor Level.

13 Providing and laying controlled cement concrete M-250 and curing 187.00 Cu.M. 7694.36 Rupees Seven

complete including the cost of form work but excluding the cost of Thousand Six Hundred

Cu.M. Ninety Four And Paise

reinforcement for reinforced concrete work in

Columns From 5th Floor Level to Terrace Floor Level. Thirty Six Only

14 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 385.40 Cu.M. 3005.76 Rupees Three Thousand

6- Graded stone aggregates 40 mm nominal size) and curing complete Five And Paise Seventy

Cu.M. Six Only

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

excluding cost of formwork in

(A) Foundation and Plinth

15 Providing and laying in position Ready Mixed M-300 grade concrete for 177.00 Cu.M. 6194.61 Rupees Six Thousand

reinforced cement concrete work, using cement content as per approved One Hundred Ninety

Cu.M. Four And Paise Sixty

Design Mix Without Fly Ash manufactured in fully automatic batching

plant and transported to site of work in transit mixer for a lead upto 10 One Only

kms having continuous agitated mixer, manufactured as per mix design

of specified grade for reinforced cement concrete work including pumping

of R.M.C. from transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering, shuttering, finishing and

admixtures in recommended proportions as per IS:9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in-charge for reinforced

concrete work in Plinth Beams

16 Providing and laying in position Ready Mixed M-250 grade concrete for 138.00 Cu.M. 4993.31 Rupees Four Thousand

plain cement concrete work, using cement content as per approved Nine Hundred Ninety

Cu.M. Three And Paise Thirty

Design Mix Without Fly Ash manufactured in fully automatic batching

plant and transported to site of work in transit mixer for a lead upto

kms having continuous agitated mixer, manufactured as per mix design

of specified grade for reinforced cement concrete work including pumping

of R.M.C. from transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering, shuttering, finishing and

admixtures in recommended proportions as per IS:9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in-charge for reinforced

concrete work in

Plinth Slab/ Grade Slab

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

17 Providing and laying in position Ready Mixed M-250 grade concrete for 723.00 Cu.M. 6596.84 Rupees Six Thousand

reinforced cement concrete work, using cement content as per approved Five Hundred Ninety Six

Cu.M. And Paise Eighty Four

Design Mix Without Fly Ash manufactured in fully automatic batching

plant and transported to site of work in transit mixer for a lead upto 10 Only

kms having continuous agitated mixer, manufactured as per mix design

of specified grade for reinforced cement concrete work including pumping

of R.M.C. from transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering, shuttering, finishing and

admixtures in recommended proportions as per IS:9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in-charge for reinforced

concrete work in Beams All Floor Level

18 Providing and laying in position Ready Mixed M-250 grade concrete for 1076.00 Cu.M. 6741.20 Rupees Six Thousand

reinforced cement concrete work, using cement content as per approved Seven Hundred Forty

Cu.M. One And Paise Twenty

Design Mix Without Fly Ash manufactured in fully automatic batching

plant and transported to site of work in transit mixer for a lead upto 10 Only

kms having continuous agitated mixer, manufactured as per mix design

of specified grade for reinforced cement concrete work including pumping

of R.M.C. from transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering, shuttering, finishing and

admixtures in recommended proportions as per IS:9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in-charge for reinforced

concrete work in Slab All Floor Level

19 Providing and laying in position Ready Mixed M-300 grade concrete for 16.00 Cu.M. 6640.88 Rupees Six Thousand

reinforced cement concrete work, using cement content as per approved Six Hundred Forty And

Cu.M. Paise Eighty Eight Only

Design Mix Without Fly Ash manufactured in fully automatic batching

plant and transported to site of work in transit mixer for a lead upto

kms having continuous agitated mixer, manufactured as per mix design

of specified grade for reinforced cement concrete work including pumping

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

of R.M.C. from transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering, shuttering, finishing and

admixtures in recommended proportions as per IS:9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in-charge for reinforced

concrete work in Lift Walls upto Plinth

20 Providing and laying in position Ready Mixed M-250 grade concrete for 127.00 Cu.M. 6606.83 Rupees Six Thousand

reinforced cement concrete work, using cement content as per approved Six Hundred Six And

Cu.M. Paise Eighty Three Only

Design Mix Without Fly Ash manufactured in fully automatic batching

plant and transported to site of work in transit mixer for a lead upto

kms having continuous agitated mixer, manufactured as per mix design

of specified grade for reinforced cement concrete work including pumping

of R.M.C. from transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering, shuttering, finishing and

admixtures in recommended proportions as per IS:9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in-charge for reinforced

concrete work in Lift Walls All Floor Level

21 Providing and laying controlled cement concrete M-250 and curing 81.00 Cu.M. 7678.95 Rupees Seven

complete including the cost of form work but excluding the cost of Thousand Six Hundred

Cu.M. Seventy Eight And Paise

reinforcement for reinforced concrete work in

Lintels All Floor Level Ninety Five Only

22 Providing and laying controlled cement concrete M-250 and curing 23.00 Cu.M. 8381.17 Rupees Eight Thousand

complete including the cost of form work but excluding the cost of Three Hundred Eighty

Cu.M. One And Paise

reinforcement & Finishing exposed surface with cement mortar 1:3 etc

complete for reinforced concrete work in Seventeen Only

Chhajjas All Floor Level

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

23 Providing and laying in position Ready Mixed M-250 grade concrete for 152.00 Cu.M. 8056.09 Rupees Eight Thousand

reinforced cement concrete work, using cement content as per approved Fifty Six And Paise Nine

Cu.M. Only

Design Mix Without Fly Ash manufactured in fully automatic batching

plant and transported to site of work in transit mixer for a lead upto

kms having continuous agitated mixer, manufactured as per mix design

of specified grade for reinforced cement concrete work including pumping

of R.M.C. from transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering, shuttering, finishing and

admixtures in recommended proportions as per IS:9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in-charge for reinforced

concrete work in Staircase All Floor Level

24 Providing and laying controlled cement concrete M-150 and curing 29.00 Cu.M. 3910.10 Rupees Three Thousand

complete including the cost of form work and reinforcement for reinforced Nine Hundred Ten And

Cu.M. Paise Ten Only

concrete work in :

(a) Foundations, footings Bases of columns and the like and Mass

25 Providing and laying controlled cement concrete M-250 and curing 22.00 Cu.M. 4644.99 Rupees Four Thousand

complete including the cost of form work but excluding the cost of Six Hundred Forty Four

Cu.M. And Paise Ninety Nine

reinforcement for reinforced concrete work

in foundation footings, base of columns and mass concrete.

26 Providing and laying controlled cement concrete M-200 and curing 69.00 Cu.M. 4382.39 Rupees Four Thousand

complete including the cost of form work but excluding the cost of Three Hundred Eighty

Cu.M. Two And Paise Thirty

reinforcement for reinforced concrete work

in foundation footings, base of columns and mass concrete. Nine Only

27 Providing and laying controlled cement concrete M-200 and curing 30.00 Cu.M. 8551.67 Rupees Eight Thousand

complete including the cost of form work but excluding the cost of Five Hundred Fifty One

Cu.M. And Paise Sixty Seven

reinforcement for reinforced concrete work

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

in Columns, pillars posts and struts G.FLOOR Only

28 Providing and laying controlled cement concrete M-250 and curing 20.00 Cu.M. 6227.66 Rupees Six Thousand

complete including the cost of form work but excluding the cost of Two Hundred Twenty

Cu.M. Seven And Paise Sixty

reinforcement for reinforced concrete work in Plinth BEAMS

29 Providing and laying controlled cement concrete M-150 and curing 35.90 Cu.M. 4183.42 Rupees Four Thousand

complete including the cost of form work but excluding the cost of One Hundred Eighty

Cu.M. Three And Paise Forty

reinforcement for reinforced concrete work in PLINTH SLAB

30 Providing and laying controlled cement concrete M-200 and curing 24.00 Cu.M. 6191.30 Rupees Six Thousand

complete including the cost of form work but excluding the cost of One Hundred Ninety

Cu.M. One And Paise Thirty

reinforcement for reinforced concrete work in Plinth BEAMS

31 Providing and laying controlled cement concrete M-200 and curing 16.00 Cu.M. 5705.49 Rupees Five Thousand

complete including the cost of form work but excluding the cost of Seven Hundred Five

Cu.M. And Paise Forty Nine

reinforcement for reinforced concrete work

in Wall caps / Coping / Lintel bends Only

32 Providing and laying controlled cement concrete M-200 and curing 25.60 Cu.M. 6622.57 Rupees Six Thousand

complete including the cost of form work but excluding the cost of Six Hundred Twenty

Cu.M. Two And Paise Fifty

reinforcement for reinforced concrete work in BEAMS

Seven Only

33 Providing and laying controlled cement concrete M-200 and curing 24.00 Cu.M. 6851.84 Rupees Six Thousand

complete including the cost of form work but excluding the cost of Eight Hundred Fifty One

Cu.M. And Paise Eighty Four

reinforcement for reinforced concrete work in Walls

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

34 Providing and laying controlled cement concrete M-200 and curing 7.50 Cu.M. 7486.12 Rupees Seven

complete including the cost of form work but excluding the cost of Thousand Four Hundred

Cu.M. Eighty Six And Paise

reinforcement for reinforced concrete work in Lintels

Twelve Only

35 Providing and laying controlled cement concrete M-200 and curing 11.10 Cu.M. 8185.04 Rupees Eight Thousand

complete including the cost of form work but excluding the cost of One Hundred Eighty

Cu.M. Five And Paise Four

reinforcement for reinforced including finishing exposed surface in

Cement Mortar 1:3 concrete work in CHHAJJAS Only

36 Providing and laying controlled cement concrete M-200 and curing 69.00 Cu.M. 6202.41 Rupees Six Thousand

complete including the cost of form work but excluding the cost of Two Hundred Two And

Cu.M. Paise Forty One Only

reinforcement for reinforced concrete work in SLABS

37 Providing Thermo Mechanically Treated Bars (TMT) Fe500D 544700.00 Kg. 78.86 Rupees Seventy Eight

reinforcement for RCC work including bending, binding and placing in And Paise Eighty Six

position for All Floors etc. complete. (Primary producer of steel TATA,

RINL, VIZAG, SAIL, JSW)

38 Providing Thermo Mechanically Treated Bars (TMT) Fe500D 44840.00 Kg. 76.21 Rupees Seventy Six And

reinforcement for RCC work including bending binding and placing in Paise Twenty One Only

position upto floor two level etc. complete. (Primary producer of steel

TATA, RINL, VIZAG, SAIL, JSW)

39 Providing and Laying Brick work using common Brunt clay building bricks 244.00 Cu.M. 4021.02 Rupees Four Thousand

having crushing strength not less than 35 Kg./Sq.cm. in foundation and Twenty One And Paise

Cu.M. Two Only

plinth in cement mortar 1:6 (1cement : 6 fine sand)

(b) Conventional

40 Providing and Laying Brick work using common Brunt clay building bricks 1610.00 Cu.M. 4456.25 Rupees Four Thousand

having crushing strength not less than 35 Kg./Sq.cm..in cement mortar Four Hundred Fifty Six

Cu.M. And Paise Twenty Five

1:6 (1cement : 6 fine sand) in super structure above plinth level at All

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

Floors (b) Conventional

41 Providing and Laying Half brick masonry in common brunt clay building 693.00 Sq.Mt. 739.38 Rupees Seven Hundred

bricks having crushing strength not less than 35 Kg./Sq.cm.. In cement Thirty Nine And Paise

Sq.Mt. Thirty Eight Only

mortar 1:3 (1cement : 3 coarse sand) with 2 Nos. of 6 mm. Diameter mild

steel round bars after every three course embedded in cement mortar in

super structure above plinth level at All Floors (b) Conventional

42 Providing and Fixing MAIN DOOR using 35 x 100 MM. M.S. Pipe Hollow 10.00 Sq.Mt. 3813.76 Rupees Three Thousand

frame work as shown in the detailed design provided by The Architect Eight Hundred Thirteen

Sq.Mt. And Paise Seventy Six

Office and double shutter specially designed hollow door with horizontal

25 x 25 mm. M. S. square pipe bands at equal distance throughout the Only

height of the frame as per the detailed design provided by the architect.

with 19 mm. marine ply with edge beading & laminate on both sides

colour, pattern and design of which is to be approved by the architect.

43 Providing and fixing 35 mm thick Double SHUTTER Solid Core Wooden 84.00 Sq.Mt. 4919.49 Rupees Four Thousand

FLUSH DOOR using Anodized aluminium section frame equivalent to Nine Hundred Nineteen

Sq.Mt. And Paise Forty Nine

Jindal door section No 19552 - weight not less than 1.116 kg / mt. with

wooden inserts for durable grip of door hinges. (frame size 38mmx 63.5 Only

mm.) and Shutters confirming to IS 2202 & ISI approved manufacturer,

covered with 1 mm thick Laminates on both shutters of approved colour,

pattern and design by the Architect, and 6 mm thick polished teakwood

beading on periphery fixed with min. 4 nos. of 150 mm high SS Hinges

including 200 mm Stainless Steel Handles, Heavy Stainless steel Aldrop

and other SS Fixtures and locking arrangements as per detailed

drawings / as directed and approved by the Architect and Engineer In-

charge etc. complete.

44 Providing and fixing 35 mm thick Single SHUTTER Solid Core Wooden 573.20 Sq.Mt. 5341.01 Rupees Five Thousand

FLUSH DOOR using Anodized aluminium section frame equivalent to Three Hundred Forty

Sq.Mt. One And Paise One

Jindal door section No 19552 - weight not less than 1.1 kg / mt. with

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

wooden inserts for durable grip of door hinges. (frame size 38mmx 63.5 Only

mm.) and Shutters confirming to IS 2202 & ISI approved manufacturer,

covered with 1 mm thick Laminates on both shutters of approved colour,

pattern and design by the Architect, and 6 mm thick polished teakwood

beading on periphery fixed with min. 4 nos. of 150 mm high SS Hinges

including 200 mm Stainless Steel Handles, Heavy Stainless steel Aldrop

and other SS Fixtures and locking arrangements as per detailed

drawings / as directed and approved by the Architect and Engineer In-

charge etc. complete.

45 Providing and fixing FRP frame size 125 x 65 mm and 35mm thick FRP 57.00 Sq.Mt. 2615.04 Rupees Two Thousand

shutter having extra reinforcement on sides & edges in polish finish. The Six Hundred Fifteen And

Sq.Mt. Paise Four Only

core of the shutter & frame is to be filed up with injected polyurethane

foam done in situ along with embedded wooden pieces for stiffening &

also taking hinges & fixtures. The whole FRP frame & shutter is to be

water proof weather proof, termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with necessary screws &

aluminium S.S fixtures & fastenings & fastener sleeve.

46 Providing and fixing mild steel door and windows of frame of 40 x 40 x 6 1290.00 Kg. 74.65 Rupees Seventy Four

mm and shutter frame for doors 30 x 30 x 3 & for windows 35 x 35 x 5 And Paise Sixty Five

mm size angle & for Shutter 25 x 25 x 3 and 18 gauge sheet for panels &

10 mm dia bars at 10 cm c/c for grill, including 20 x 6 mm flat for binding

patti & one coat of primer and two coats of oil painting etc. complete.

47 Providing and fixing Standard Extruded Colour Anodized Aluminium 45.00 Sq.Mt. 3538.30 Rupees Three Thousand

Section equivalent to Jindal Series C (20 MM) for Sliding Three track Five Hundred Thirty

Sq.Mt. Eight And Paise Thirty

Window (3 Float Glass Shutters) having aluminium section nos.

for Bottom Frame, 21650 for Frame Top & Sides, 20993 for Shutter Top Only

20530 & Bottom 20529, for Shutter Sides 20544 & 20531 for Shutter

Interlock; with 5mm thick transparent tinted float glass, Rubber Gasket,

Air Strips and finishing joints with silicon sealant; with standard extruded

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

colour anodized aluminium coated fittings, fixtures and locking

arrangements as per detailed drawings / as directed and approved by the

Architect and Engineer In-charge etc. complete.

48 Providing and fixing Standard Extruded Colour Anodized Aluminium 518.20 Sq.Mt. 4408.32 Rupees Four Thousand

Section equivalent to Jindal Series E (30 MM) for Sliding Two track Four Hundred Eight And

Sq.Mt. Paise Thirty Two Only

Window (2 Float Glass Shutters) having aluminium section nos.

for Bottom Frame, 20877 for Frame Top & Sides, 20993 for Shutter Top,

& Lock Rail, 21675, Bottom Rail 20772 & 20550 for Shutter Interlock; with

5mm thick transparent tinted float glass, Rubber Gasket, Air Strips and

finishing joints with silicon sealant; with standard extruded colour

anodized aluminium coated fittings, fixtures and locking arrangements as

per detailed drawings / as directed and approved by the Architect and

Engineer In-charge etc. complete.

49 Providing and fixing standard extruded of aluminium section of size 63.50 9.00 Sq.Mt. 1525.00 Rupees One Thousand

x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with colour anodized aluminium Five Hundred Twenty

Sq.Mt. Five Only

frame with 5 mm thick transparent bronze colour tinted float glass as

details etc complete for Fix window.

50 Providing and fixing Standard Extruded Colour Anodized Aluminium 48.70 Sq.Mt. 4949.26 Rupees Four Thousand

Sections equivalent to Jindal 52 mm series for Ventilations as per the Nine Hundred Forty Nine

Sq.Mt. And Paise Twenty Six

detailed design of the Architect, having section 21635 for frame with

mm thick frosted white glass adjustable Louvers of standard make with Only

standard extruded colour anodized aluminium coated fittings, fixtures and

locking arrangements as per detailed drawings / as directed and

approved by the Architect and Engineer In-charge etc. complete.

51 Providing and fixing rolling shutters of approved make made of 80 mm 36.80 Sq.Mt. 3503.41 Rupees Three Thousand

wide M.S. laths inter-locked together through their entire length and Five Hundred Three And

Sq.Mt. Paise Forty One Only

jointed together at the ends by end locks mounted on specially designed

pipe shaft with bracket plates, guide channels and arrangements for

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

inside and outside locking with push pull operation including the cost of

hood cover and spring etc. complete.

(A) Shutters having width below 3.5 M.

52 Painting two coats (including priming coat) on new steel and other metal 81.00 Sq.Mt. 122.49 Rupees One Hundred

surface with enamel paint, brushing, interior to give an even shade Twenty Two And Paise

Sq.Mt. Forty Nine Only

including cleaning the surface an even shade including cleaning the

surface of all dirt, dust and other foreign matter.

53 Providing and fixing Safety grills of required pattern for windows / Door 17404.00 Kg. 105.25 Rupees One Hundred

using 12 mm dia M.S polished bars at specified spacing inserted and Five And Paise Twenty

Kg. Five Only

welded inside in Rectangular CRC pipes of required size as per design

and hold fasting with coach bolts including one coat of primer and two

coats of Matt finished oil painting etc complete.

54 Providing and fixing M.S. grills / Gates / M.S. Pipes of required pattern to 5833.00 Kg. 149.16 Rupees One Hundred

brick walls / Columns prepared with M.S. flats, angles, Square / round Forty Nine And Paise

Kg. Sixteen Only

bars, square pipes, at required spacings with necessary hold fasts as per

detailed drawing and fixing brick walls / coping / columns etc. complete

including painting two coat & applying primer coat.

(A) Ornamental Grill

55 Providing and fixing fix louvers: 114 mm wide G.I. sheet having thickness 215.00 Sq.Mt. 2404.31 Rupees Two Thousand

of 0.55 mm & weight not less than 490 gm /meter, roll formed to create Four Hundred Four And

Sq.Mt. Paise Thirty One Only

84 mm wide louver snap fixed on special shaped G. I. Channel. Fix

louvers & Channels shall finished with powder coating of 55 micron per

detailed drawing and as directed by Engineer in charge etc. complete.

56 Providing and laying Machine Cut, Machine polished 7.5 cm wide 18-20 22.00 Sq.Mt. 2327.39 Rupees Two Thousand

mm thick Granite stone strip flooring over 20 mm. (average) thick base Three Hundred Twenty

Sq.Mt. Seven And Paise Thirty

of cement mortar 1:6 (1 cement : 6 coarse sand ) and laid over and

jointed with grey cement slurry. Nine Only

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

57 Providing and laying Machine Polished, Machine Cut, Free Edge Granite 546.00 Sq.Mt. 2722.83 Rupees Two Thousand

stone slab 18 mm thick {Single piece not more than 155 cm long} for stair Seven Hundred Twenty

Sq.Mt. Two And Paise Eighty

steps and riser as per design incl. rounded Moulding front edge in trade

of steps laid on 20 mm thick cement mortar 1:6 (1 -cement : 6 coarse Three Only

sand) and risers & skirting on 10 mm thick cement Plaster 1:3 (1 -cement

: 3 coarse sand) jointed with grey cement slurry including rubbing and

polishing etc. complete.

58 P & L 60 cm x 60 cm vitrified 8 mm thick tile flooring over 20 mm 1611.00 Sq.Mt. 1189.88 Rupees One Thousand

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new One Hundred Eighty

Sq.Mt. Nine And Paise Eighty

surface or fixing on existing flooring by adhesive material including

dismantling of existing flooring and jointed with colour cement slurry Eight Only

including finished with flush pointing & cleaning the surface etc. complete

for light shade

59 Providing and laying 60 cm x 60 cm Glazed Vitrified Tiles 10 mm thick 113.00 Sq.Mt. 1141.45 Rupees One Thousand

{approved or equivalent brand} in skirting risers of steps and dedo on One Hundred Forty One

Sq.Mt. And Paise Forty Five

10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed

with white cement slurry as per Colour and Pattern approved by the Only

Architect and engineer in charge.

60 Providing and laying 80 cm x 80 cm Glazed Vitrified Tiles 10 mm thick 3660.00 Sq.Mt. 1480.26 Rupees One Thousand

{approved or equivalent brand} flooring over 20 mm {average} base of Four Hundred Eighty

Sq.Mt. And Paise Twenty Six

cement mortar 1:6 { 1 cement : 6 coarse sand} on new surface including

finished with flush pointing & cleaning the surface etc. complete as per Only

Colour and Pattern approved by the Architect and engineer in charge.

61 Providing and laying 80cm x 80 cm Glazed Vitrified Tiles 8 to 10 mm 194.00 Sq.Mt. 1538.85 Rupees One Thousand

thick {approved or equivalent brand} in skirting risers of steps and dedo Five Hundred Thirty

Sq.Mt. Eight And Paise Eighty

on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed

with white cement slurry as per Colour and Pattern approved by the Five Only

Architect and engineer in charge.

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

62 Providing and laying 60 cm x 60 cm Matt Finished Vitrified Tiles 10 mm 397.00 Sq.Mt. 1397.83 Rupees One Thousand

thick {approved or equivalent brand} flooring over 20 mm {average} base Three Hundred Ninety

Sq.Mt. Seven And Paise Eighty

of cement mortar 1:6 { 1 cement : 6 coarse sand} on new surface

including finished with flush pointing & cleaning the surface etc. complete Three Only

as per Colour (10% Dark Shades for Pattern), Shade and Pattern

approved by the Architect and engineer in charge.

63 Providing and laying 30 cm x 30 cm Anti Skid Ceramic Tiles 8 mm thick 54.00 Sq.Mt. 970.07 Rupees Nine Hundred

{approved or equivalent brand} flooring over 20 mm {average} base of Seventy And Paise

Sq.Mt. Seven Only

cement mortar 1:6 {1 cement : 6 coarse sand} on new surface including

finished with flush pointing & cleaning the surface etc. complete as per

Colour, shade and Pattern approved by engineer in charge.

64 Providing and laying 30 cm x 60 cm Glazed Tiles 8 mm thick {approved 1100.00 Sq.Mt. 1441.22 Rupees One Thousand

or equivalent brand} skirting risers of steps and dado on 10 mm thick Four Hundred Forty One

Sq.Mt. And Paise Twenty Two

cement plaster 1:3 (1 Cement : 3 coarse sand) and jointed with white

cement slurry. {MATCH TO FLOORING} Only

65 Providing and laying white glazed tiles 6mm thick in flooring treads of 100.00 Sq.Mt. 917.25 Rupees Nine Hundred

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1- Seventeen And Paise

Sq.Mt. Twenty Five Only

cement : 3-coarse sand ) finishing with flush pointing in white cement etc.

66 Providing and laying white glazed tiles 6mm thick in skirting risers of 150.00 Sq.Mt. 1054.67 Rupees One Thousand

steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3- coarse Fifty Four And Paise

Sq.Mt. Sixty Seven Only

sand) and jointed with white cement slurry

67 Providing and laying polished Blue Kota stone slab flooring over 20mm 284.00 Sq.Mt. 992.66 Rupees Nine Hundred

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) Ninety Two And Paise

Sq.Mt. Sixty Six Only

laid over and jointed with grey cement slurry mixed with pigment to match

the shade of slab including rubbing and polishing etc. complete.

(A) 25mm thick

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

68 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking 719.00 Sq.Mt. 686.90 Rupees Six Hundred

concrete block 60mm thick with grade of concrete M300 pneumatic Eighty Six And Paise

Sq.Mt. Ninety Only

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per guidelines of

IRC : SP 63-2018 etc. complete.

69 Providing and fixing pre-cast concrete kerb stone of gray cement based 97.00 Rmt. 361.64 Rupees Three Hundred

concrete block 30cm length, 30cm height and 15 cm thick of M 250 grade Sixty One And Paise

Rmt. Sixty Four Only

concrete as per approved design and including excavation for fixing in

proper line and level, filling the joint with C:M 1:3 (1 Cement : 3 fine sand)

etc complete.

70 Providing and laying cement concrete pavement (25mm to 50mm thick) 47.00 Cu.M. 4437.57 Rupees Four Thousand

with 1:2:4 (1-cement : 2-coarse sand : 4-stone aggregate 20mm nominal Four Hundred Thirty

Cu.M. Seven And Paise Fifty

size) including finishing with floating coat of neat cement complete.

Seven Only

71 Providing and laying water proofing treatment with china mosaic tiles 1241.00 Sq.Mt. 1047.95 Rupees One Thousand

flooring over avg 40 mm C.C. 1:2:4 {1 Cement : 2 sand : 4 Kapachi / Grit Forty Seven And Paise

Sq.Mt. Ninety Five Only

6 to 12 mm size} bedding for maintaining slope for plain and curve

surface & 12 mm to 20 mm of broken piece of ceramic / glazed tiles ( one

for more colour as directed ) to be laid over cement mortar bedding of C

M 1:3 (1 cement : 3 sand ) contain one Kg of water proofing materials per

bag of O P C at plain or / and slops and to be tempered to bring mortar

ceramic up to surface with using white cement and colour pigment

including rounding of junctions and extending them up to 15 cm along the

wall and curing with bends any patterns or design as per drawing and

cleaning by using oxalic acid etc complete.

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

72 Providing and laying Mirror polished Granite slab 18-20 mm (Average) 1050.00 Sq.Mt. 3939.36 Rupees Three Thousand

thick for Doors / Windows Sills & Jambs projected 06 mm from Wall Nine Hundred Thirty

Sq.Mt. Nine And Paise Thirty

Thickness as per design and detailed drawings incl. full moulded round

both edge on 10 mm thick cement mortar 1:3 (1 -cement : 3 coarse sand Six Only

) jointed with grey cement slurry including making 10 mm x 10 mm wide

groove in plaster, rubbing and polishing etc. complete. The rear face of

Granite shall be sanded using clean sand Sieve No. 10 passed 2 mm,

fixed with Araldite and dried for at least 36 Hours before fixing.

73 Providing and laying Wall Cladding using Vitrified Tiles 8 mm and Mirror 189.00 Sq.Mt. 1533.82 Rupees One Thousand

polished Granite slab 18-20 mm (Average) thick as per design and Five Hundred Thirty

Sq.Mt. Three And Paise Eighty

detailed drawings on 10 mm thick cement mortar 1:3 (1 -cement :

coarse sand) jointed with grey cement slurry including making 3 mm Two Only

Grooves filled with Epoxy Ground as per drawings, rubbing and polishing

etc. complete. The rear face of Granite shall be sanded using clean sand

Sieve No. 10 passed 2 mm, fixed with Araldite and dried for at least

Hours before fixing.

74 Providing 20 mm thick double coat mala cement plaster on interior brick/ 14104.00 Sq.Mt. 421.13 Rupees Four Hundred

concrete Walls for plastering comprising of base coat of 12 mm thick Twenty One And Paise

Sq.Mt. Thirteen Only

cement plaster in cement mortar (1 cement : 4 coarse sand) in rough

finishing and 8 mm thick top coat of cement plaster 1:2 (1 cement :

Coarse Sand) finished with trovel including two coats of acrylic lappy

(putty) of approved or equivalent brand and One coat of primer of

approved brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth including

scaffolding curing etc. complete.

All Floors

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

75 Providing 10 mm. Thick cement plaster in single coat for plastering on 8221.00 Sq.Mt. 272.96 Rupees Two Hundred

ceiling and soffits of stairs upto floor two level and finished even and Seventy Two And Paise

Sq.Mt. Ninety Six Only

smooth in : (I) Cement mortar 1:3 (1 cement : 3 sand) including two coats

of acrylic lappy (putty) of approved or equivalent brand and One coat of

primer of approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth. All Floors

76 Providing and filling screened of burnt coal cinder including and 97.00 Cu.M. 600.56 Rupees Six Hundred

consolidation etc complete. And Paise Fifty Six Only

77 Providing 20 mm thick cement plaster in single coat on brick / concrete 488.00 Sq.Mt. 367.46 Rupees Three Hundred

wall for interior plastering up to floor two level finished even and smooth ( Sixty Seven And Paise

Sq.Mt. Forty Six Only

ii )Cement mortar 1:3 ( 1-cement,3 - sand ) and mixing approved

waterproofing materials in cement mortar in proportion recommended by

the manufacturer for All Floors.

78 Painting (three coats) with plastic emulsion paint of approved brand and 13884.00 Sq.Mt. 112.95 Rupees One Hundred

manufacture on wall surfaces to give an even shade including thoroughly Twelve And Paise

Sq.Mt. Ninety Five Only

brushing the surface free from mortar droppings and other foreign matter

and sand papered smooth.

79 Painting (three coats) with plastic emulsion paint of approved brand and 8161.00 Sq.Mt. 120.59 Rupees One Hundred

manufacture on ceilings, Soffits and sloping roofs to give an even shade Twenty And Paise Fifty

Sq.Mt. Nine Only

including thoroughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

80 Distempering (two coats) with oil bound wash able distemper of approved 280.00 Sq.Mt. 76.84 Rupees Seventy Six And

brand & manufacture and of required shade on wall surfaces to give an Paise Eighty Four Only

even shade over & including priming coat with alkali resistance primer of

approved brand after thoroughly brushing the surface free from mortar

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

dropping & other foreign matter and also preparing the surface even and

81 20 mm. Thick sand faced GUTAKA FINISHED cement plaster on walls 6398.00 Sq.Mt. 367.99 Rupees Three Hundred

upto All height above ground level consisting of 18 mm. Thick backing Sixty Seven And Paise

Sq.Mt. Ninety Nine Only

coat of C.M. 1:3 (1 cement : 3 sand) and 5 mm. Thick finishing coat of

C.M. 1:1 (1 cement : 1 sand) including making groove 18 mm wide and

10 mm deep as approved pattern etc. complete as directed.

82 20 mm. Thick sand faced GUTAKA FINISHED cement plaster on walls 1331.00 Sq.Mt. 300.66 Rupees Three Hundred

upto 10 mt height above ground level consisting of 12 mm. Thick backing And Paise Sixty Six Only

coat of C.M. 1:3 (1 cement : 3 sand) and 8 mm. Thick finishing coat of

C.M. 1:1 (1 cement : 1 sand) including making groove 6 mm wide and

mm deep as approved pattern etc. complete as directed.

83 Applying priming coat over plastered surface after and including 7958.00 Sq.Mt. 100.90 Rupees One Hundred

preparing the surface by thoroughly cleaning dirt and other foreign And Paise Ninety Only

matter, sand papering

(B) Cement Primer for Weather proof acrylic emulsion paint

84 Finishing wall with weather proof exterior emulsion paint on wall surface 7958.00 Sq.Mt. 114.53 Rupees One Hundred

(two coats) to give an required even shade after thoroughly brushing the Fourteen And Paise Fifty

Sq.Mt. Three Only

surface to remove all dirt, and remains of loose powdered materials etc

85 Providing and fixing concealed centre point to wall ceiling & floor CPVC 640.00 Rmt. 166.86 Rupees One Hundred

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for Sixty Six And Paise

Rmt. Eighty Six Only

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete.

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

86 Providing and fixing concealed centre point to wall ceiling & floor CPVC 925.00 Rmt. 249.72 Rupees Two Hundred

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for Forty Nine And Paise

Rmt. Seventy Two Only

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete. [C]

87 Providing and fixing concealed centre point to wall ceiling & floor CPVC 80.00 Rmt. 442.04 Rupees Four Hundred

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for Forty Two And Paise

Rmt. Four Only

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete.

88 Providing and fixing concealed centre point to wall ceiling & floor CPVC 80.00 Rmt. 653.77 Rupees Six Hundred

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for Fifty Three And Paise

Rmt. Seventy Seven Only

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete. [F] 50mm.

89 Providing laying and jointing in true line and level 15 mm dia. U.P.V.C. 355.00 Rmt. 72.65 Rupees Seventy Two

Pipe (SCH -40) line including fittings of approved or equivalent brand as And Paise Sixty Five

Rmt. Only

approved by Engineer In charge. Pipe shall be fixed on the wall with the

help of clamp at every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

90 Providing laying and jointing in true line and level 25 mm dia. U.P.V.C. 925.00 Rmt. 91.84 Rupees Ninety One And

Pipe (SCH -40) line including fittings of approved or equivalent brand as Paise Eighty Four Only

approved by Engineer In charge. Pipe shall be fixed on the wall with the

help of clamp at every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

91 Providing laying and jointing in true line and level 40 mm dia. U.P.V.C. 400.00 Rmt. 148.12 Rupees One Hundred

Pipe (SCH -40) line including fittings of approved or equivalent brand as Forty Eight And Paise

Rmt. Twelve Only

approved by Engineer In charge. Pipe shall be fixed on the wall with the

help of clamp at every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

92 Providing laying and jointing in true line and level 50 mm dia. U.P.V.C. 260.00 Rmt. 195.67 Rupees One Hundred

Pipe (SCH -40) line including fittings of approved or equivalent brand as Ninety Five And Paise

Rmt. Sixty Seven Only

approved by Engineer In charge. Pipe shall be fixed on the wall with the

help of clamp at every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

93 Providing and fixing Heavy Handle valve of approved brand & following 85 No. 547.42 Rupees Five Hundred

internal dia of Brass including fixing in pipe lines etc. complete (C) 25 mm Forty Seven And Paise

Nos. Forty Two Only

94 Providing and fixing Heavy Handle valve of approved brand & following 53 No. 721.14 Rupees Seven Hundred

internal dia of Brass including fixing in pipe lines etc. complete (E) 40 mm Twenty One And Paise

Nos. Fourteen Only

95 Providing and fixing Butterfly valve Butterfly valves IS 13095 with lSI 36 No. 2363.40 Rupees Two Thousand

mark PN 1.0 of approved brand & following internal dia of Brass including Three Hundred Sixty

Nos. Three And Paise Forty

fixing in pipe lines etc. complete (A) 50 mm Dia

96 Providing and fixing to wall ceiling floor 10.0 Kg. F/Cm2 working pressure 490.00 Rmt. 277.43 Rupees Two Hundred

polythene pipes of approved or equivalent brand for soil waste and Seventy Seven And

Rmt. Paise Forty Three Only

ventilating pipes of the following outside dia. low density, complete with

necessary fittings, wall clamps etc including making good the wall ceiling

and floor. (F) 75 mm

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

97 Providing laying and jointing in true line and level 110 diameter U.P.V.C. 600.00 Rmt. 834.95 Rupees Eight Hundred

SWR Type B pipe confirming to IS 13592-1992 with one end plain and Thirty Four And Paise

Rmt. Ninety Five Only

other end socketed with rubbering, & fitting conforming to ISI 14735-1999

of approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diameter x 149 mm length x 145 mm high at

every 2000 mm centre to centre or shall be concealed in walls as

directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

98 Providing laying and jointing in true line and level 160 diameter U.P.V.C. 690.00 Rmt. 831.22 Rupees Eight Hundred

SWR Type B pipe confirming to IS 13592-1992 with one end plain and Thirty One And Paise

Rmt. Twenty Two Only

other end socketed with rubbering, & fitting conforming to ISI 14735-1999

of approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diameter x 149 mm length x 145 mm high at

every 2000 mm centre to centre or shall be concealed in walls as

directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

99 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 100 mm 120 No. 571.08 Rupees Five Hundred

diameter with jali of the following nominal diameter of self cleansing Seventy One And Paise

Nos. Eight Only

design with C.I. screwed down or hinged grating including the cost of

cutting and making good the walls.

100 Providing and fixing C.P. bib cock 15mm φ heavy duty with cap of 98 No. 601.96 Rupees Six Hundred

approved or equivalent brand as per direction of Engineer In-charge etc. One And Paise Ninety

Nos. Six Only

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

101 Providing and fixing C.P. Angle stop cock 15 mm Heavy duty with caps 74 No. 609.03 Rupees Six Hundred

Nine And Paise Three

Nos. Only

102 Providing and fixing Concealed cock 15 mm Heavy duty with cap 74 No. 705.99 Rupees Seven Hundred

Five And Paise Ninety

Nos. Nine Only

103 Providing and fixing wash basin CERA CAT No. S2030105 (CAMRY) 66 No. 11713.36 Rupees Eleven

with bottle trap Jaquar-ALD-769 with union and wall discharge pipe with Thousand Seven

Nos. Hundred Thirteen And

flanges and cap of approved make, 32mm dia GI waste pipe with fittings

up to floor trap, 32mm dia waste coupling with CP chain and rubber plug, Paise Thirty Six Only

15mm dia Angle Stop Cock - Jaquar-FLORENTINE CAT. NO. - 5053N,

15mm heavily quality flexible PVC inlet connection of required length with

brass union, washer and cap complete in all respects with 15mm dia

pillar tap Jaquar-FLORENTINE CAT. NO. - 5011N including cutting and

making good the walls RCC work as directed and making good the same

etc. complete. (Brand of All parts to be approved by the Engineer In-

104 Providing and fixing Wall Mounted Water Closet EWC Pan - CERA CAT. 66 No. 10494.62 Rupees Ten Thousand

NO. S1041101 (CARAT) with integral "P" and "S" trap including jointing Four Hundred Ninety

Nos. Four And Paise Sixty

the trap with soil pipe in cement mortar 1:1 (1-cement, 1-sand) of

approved brand including seat cover for wash down WC with CP brass Two Only

hinges and rubber buffers including providing 12.50 Litres low level

flushing cistern with a "P" pair of CI or MS bracket with complete fitting

such as lead valve Siphon 15mm dia brass ball valve with polythene float

CP brass handle, unions and couplings for connection with inlet outlet

and overflow pipes 40mm dia porcelain enamelled flush bend, including

Health Faucet Jaquar-ALD 573 operated with necessary Flush Valve of

approved make & Angle Stop Cock - Jaquar-FLORENTINE CAT. NO. -

5053N including cutting holes in walls and making good the same

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

connecting the flush bend with cistern and closet etc. complete.(Brand &

Model of All parts to be approved by the Engineer In-charge)

105 Providing and fixing Urinal of approved quality including connection with 66 No. 1550.99 Rupees One Thousand

trap and with integral longitudinal flush pipe Five Hundred Fifty And

Nos. Paise Ninety Nine Only

.(A) Squatting plate pattern white earthenware 550mm x 300mm.

106 Providing and fixing Ceramic Urinal Partition having size 800 x 365 x 150 56 No. 3030.00 Rupees Three Thousand

mm including fixing as directed by engineer in charge etc complete. Thirty Only

107 Providing and fixing Special Needs Range CRUSE SET, EWC, 710 x 370 7 No. 53130.04 Rupees Fifty Three

x 810 mm, New Cat No: S1021113 S Trap, S1021114 P Trap, S1060106 Thousand One Hundred

Nos. Thirty And Paise Four

Cistern, B1520118 Soft Close Seat Cover, B1810112 Twin Flush Fittings,

S2040101 Wash Basin 510 x 400 mm, F9030451 Spatula Lever basin Only

mixer, B2210106 Wall mounted Grab bar 600 mm long, B2210106 Wall

mounted Grab bar 600 mm long, B2210108 Wall mounted Hinged rail

750 x 750 {Cera or equivalent} as directed by Architect Office

{SUGAMYA BHARAT Instruction}

108 Providing erecting and fixing five layer Syntex pure or equivalent 40000.00 Liter 12.12 Rupees Twelve And

antimicrobial with active silver technology, antifungal, antibacterial, 100% Paise Twelve Only

UV stabilized food grade plastic with FDA approval, multi ribbed design

PVC. (ISI) mark water tank of reqd capacity each with all necessary

fittings & connection etc. complete on terrace.

109 Providing and fixing S.W. Gully trap with C.I. Grating brick masonry 10 No. 1246.92 Rupees One Thousand

chamber and water tight C.I. Cover with frame of 300 mm. X 300 size Two Hundred Forty Six

Nos. And Paise Ninety Two

(inside) with standard weight

(I) Square mouth traps (C) 150 mm. X 100 mm size P or R type Only

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

110 Providing laying (to level or slopes) and jointing reinforced concrete Light 400.00 Rmt. 665.48 Rupees Six Hundred

duty non-pressure pipes I.S. class NP2 of the following internal diameter Sixty Five And Paise

Rmt. Forty Eight Only

with collars and butt ends prepared for collar joints including testing of

joints complete.

111 Constructing brick masonry chamber for under ground C.I. Inspection 10 No. 2932.93 Rupees Two Thousand

chamber and bends with bricks having crushing strength not less than 35 Nine Hundred Thirty

Nos. Two And Paise Ninety

Kg/cm2 in cm. 1:5 C.I. Cover with frame (light duty) 455 mm. X 610 mm.

Internal dimensions, total weight of cover with frame to be not less than Three Only

38 Kgs. weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top slab

with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded stone aggregate

mm. size ) foundation concrete 1:5:10 inside plaster 15 mm. thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on

walls & bed concrete etc. complete.

(I) inside dimensions, 455 mm. x 610 mm. And 450 mm. Deep for single

pipe line.

112 Constructing brick masonry chamber for under ground C.I. Inspection 10 No. 3660.76 Rupees Three Thousand

chamber and bends with bricks having crushing strength not less than 35 Six Hundred Sixty And

Nos. Paise Seventy Six Only

Kg/cm2 in cm. 1:5 C.I. Cover with frame (light duty) 455 mm. X 610 mm.

Internal dimensions, total weight of cover with frame to be not less than

38 Kgs. weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top slab

with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded stone aggregate

mm. size ) foundation concrete 1:5:10 inside plaster 15 mm. thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on

walls & bed concrete etc. complete.

(II) inside dimensions, 500 mm. x 700 mm. And 450 mm. deep for pipe

line with one or two

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

113 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2- 10 No. 11029.97 Rupees Eleven

coarse sand : 4-graded stone aggregate 20mm nominal size) foundation Thousand Twenty Nine

Nos. And Paise Ninety Seven

concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm

size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5- Only

coarse sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-

stone aggregate 20mm nominal size) finished smooth complete including

curing and finishing (i) Inside size 900mm x 1200mm and 1.5M. deep

including C.I. cover with frame size 560mm diameter total weight of cover

and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of

frame 64 Kg.)(A) With 230mm thick walls of brick masonry using brick

having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar

1:5 (1- Cement: 5-Coarse sand) (1) A type depth 0.90 Metre for 150mm

diameter sewer.

114 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2- 5 No. 19330.46 Rupees Nineteen

coarse sand : 4-graded stone aggregate 20mm nominal size) foundation Thousand Three

Nos. Hundred Thirty And

concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm

size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5- Paise Forty Six Only

coarse sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-

stone aggregate 20mm nominal size) finished smooth complete including

curing and finishing (i) Inside size 900mm x 1200mm and 1.5M. deep

including C.I. cover with frame size 560mm diameter total weight of cover

and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of

frame 64 Kg.)(A) With 230mm thick walls of brick masonry using brick

having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar

1:5 (1- Cement: 5-Coarse sand) (2) B type depth 1.50 Metre for 150mm

diameter sewer.

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

115 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2- 5 No. 23441.74 Rupees Twenty Three

coarse sand : 4-graded stone aggregate 20mm nominal size) foundation Thousand Four Hundred

Nos. Forty One And Paise

concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm

size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5- Seventy Four Only

coarse sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-

stone aggregate 20mm nominal size) finished smooth complete including

curing and finishing (i) Inside size 900mm x 1200mm and 1.5M. deep

including C.I. cover with frame size 560mm diameter total weight of cover

and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of

frame 64 Kg.)(A) With 230mm thick walls of brick masonry using brick

having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar

1:5 (1- Cement: 5-Coarse sand) (3) C type depth 2.25 Metre for 150mm

diameter sewer.

116 Providing throating or plaster drip and moulding to R.C.C. chhajja or 497.00 Rmt. 41.66 Rupees Forty One And

groove to plaster Paise Sixty Six Only

117 Providing and fixing AISI 316 Grade stainless steel knock down railing 165.00 Rmt. 3124.08 Rupees Three Thousand

system comprising 50mm dia railing fixed on 38mm dia SS Balustrade of One Hundred Twenty

Rmt. Four And Paise Eight

845mm height placed at maximum 1200mm C/C distance along with

three SS horizontal members of 19mm dia connected at the side of

baluster with SS brackets. The balustrade shall be mounted on floor with

base plate using specially designed anchor fasteners and concealed by

AISI 316 Grade SS base cover cap (Wall thickness of pipes shall be

taken as 1.50mm along with all visible component developed in high

grade SS and wherever required, joints to be filled with bushings for extra

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

118 Providing and fixing AISI 316 Grade stainless steel knock down railing 105.00 Rmt. 1458.49 Rupees One Thousand

system comprising 50mm dia railing fixed on 38mm dia SS supports of Four Hundred Fifty Eight

Rmt. And Paise Forty Nine

100mm height placed at maximum 1200mm C/C distance. The supports

shall be fixed on wall with base plate using specially designed anchor Only

fasteners and concealed by AISI 316 Grade SS base cover cap (Wall

thickness of pipes shall be taken as 1.50mm along with all visible

component developed in high grade SS and wherever required, joints to

be filled with bushings for extra strength)

119 Providing and fixing C.I. Manhole cover 0.60m x 0.45m size having 10 No. 958.17 Rupees Nine Hundred

weight not less than 35 kgs. Fifty Eight And Paise

Nos. Seventeen Only

120 Providing and fixing PVC Cowl vent of following dia etc complete as 8 No. 151.50 Rupees One Hundred

directed Fifty One And Paise Fifty

Nos. Only

(A) 110 mm Dia

121 Providing and fixing PVC Cowl vent of following dia etc complete as 8 No. 176.75 Rupees One Hundred

directed Seventy Six And Paise

Nos. Seventy Five Only

(B) 150 mm Dia

122 Providing and fixing chicken mesh jali with square of 12.50 x 12.50 mm of 1212.00 Sq.Mt. 110.09 Rupees One Hundred

25 gauge at junction the Brick masonry and reinforcement cement Ten And Paise Nine

Sq.Mt. Only

concrete member including fixing materials scaffolding labour etc.

123 Providing 12 mm wide groove / notch in plaster including finishing the 4040.00 Rmt. 20.20 Rupees Twenty And

same etc. complete for all height. Paise Twenty Only

124 Providing cement vata (10cm. x 10 cm. size) quarter round in cement 390.00 Rmt. 23.68 Rupees Twenty Three

mortar 1:1 including neat cement finishing, watering etc. complete. And Paise Sixty Eight

Rmt. Only

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

125 Providing and fixing in position 300 mm high, 150 mm wide English / 100 No. 808.00 Rupees Eight Hundred

Gujarati letters made from 1.0 mm thick stainless steel sheet as directed Eight Only

by Engineer-in-charge with all necessary tools & plants etc. complete.

126 Providing and fixing in position 150 mm high, English / Gujarati letters 200 No. 505.00 Rupees Five Hundred

made from 1.0 mm thick stainless steel sheet as directed by Engineer-in- Five Only

charge with all necessary tools & plants etc. complete.

127 Constructing Sandwich Platform of 18 mm thick Polished Black Granite at 34.00 Sq.Mt. 4209.77 Rupees Four Thousand

top and 30 mm thick Kota stone slab flooring fitting at bottom with Two Hundred Nine And

Sq.Mt. Paise Seventy Seven

cementing Materials / adhesives and MS Angles of 50 x 50 x 6 mm as

per detailed drawings including making necessary grooves in walls with Only

Vertical Kotastone 30 mm x 2 No sandwich thick every 60 cm centre to

centre including all labour material of approved quality incl. full moulded

round front edge fixed in wall for partition and jointed with grey cement

slurry including rubbing and polishing etc. complete

128 Providing and fixing M. S. clamp made from 40mm x 6mm thick M. S. flat 500 No. 159.60 Rupees One Hundred

as per design given by Engineer in charge for fixing the C.I. / G.I. / PVC Fifty Nine And Paise

Nos. Sixty Only

pipe on wall of duct to stay away from wall etc. complete.

129 Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass 50 No. 833.73 Rupees Eight Hundred

mounted on 6 mm AC sheet or plywood sheet and fixed to wooden plug Thirty Three And Paise

Nos. Seventy Three Only

with CP brass screws and washers.

130 Providing and fixing C.P. brass towel rail complete with C.P. brass 50 No. 603.19 Rupees Six Hundred

brackets fixed to wooden plugs with C.P. brass screws.(B) 600mm x Three And Paise

Nos. Nineteen Only

20mm size.

131 Providing and fixing 600mm x 120mm glass shelf with C.P. brass bracket 50 No. 566.64 Rupees Five Hundred

and guard rail complete mixed to wooden plug with C.P. brass screws. Sixty Six And Paise

Nos. Sixty Four Only

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

132 Providing and fixing toilet paper holder.(A) C.P. Brass 50 No. 418.68 Rupees Four Hundred

Eighteen And Paise

Nos. Sixty Eight Only

133 Providing and fixing Stainless Steel Soap Dish of approved Brand as 50 No. 522.68 Rupees Five Hundred

directed by Engineer in charge including fixing as and where directed etc. Twenty Two And Paise

Nos. Sixty Eight Only

134 Add / Deduct for more / less consumption of cement due to change in 100000.00 Kg. 5.28 Rupees Five And Paise

concreting of controlled / RMC cement concrete of any grade in R.C.C. Twenty Eight Only

members like column footings, columns, beams, pardi, vertical and

horizontal fins etc. instead of controlled / RMC cement concrete M200 /

M250 / M300 / M350 as per design mix with compare to cement

consumption given in special condition including loading, unloading,

stacking and labour charges for using for concreting etc. complete.

135 Providing and fixing coloured self-adhesive PU Tactile tile, ground 105.00 Sq.Mt. 4586.41 Rupees Four Thousand

surface indicators of Polyurethane of size 300 mm x 300 mm for guiding / Five Hundred Eighty Six

Sq.Mt. And Paise Forty One

warning to the visually visitors in the centre / side of the pedestrian /

approach pathway as per specification and guidelines complete in all Only

respect to the entire satisfaction of Engineer in charge.

136 Providing and fixing Acrylic multilingual Braille (raised dots) 35 No. 1696.80 Rupees One Thousand

DIRECTIONAL SIGNBOARDS of size 225 x 150 mm designed as per Six Hundred Ninety Six

Nos. And Paise Eighty Only

accessibility standards and having 3.5 mm thick acrylic base plate with

Upper Case San Serif words made of white acrylic non glare cut out

letters of height 15 mm raised not less than 0.8 mm above base plate

and the equivalent word written in Gujarati, English or Hindi non glare

acrylic cut arrow pointing in the require direction. Each signboard to be

fixed as per manufacturers specifications on the wall at the approved

location and at a height of 1200 mm from Floor level complete as per

design / specifications and guidelines as per entire satisfaction of the

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

Engineer in charge.

137 Providing and fixing tactile layout plan of size 900 mm x 600 mm as 1 No. 33027.00 Rupees Thirty Three

approved design, made of 3.0 mm thick acrylic non glare base plate and Thousand Twenty Seven

non glare cut out symbols with Braille on which individual facility points,

like inquiry, reception, restrooms, medical room / first aid, cafeteria or

breakout area, lounge, meeting room, conference room etc. present the

respective floor with pictograph wherever needed all in tactile raised by

minimum of 1 mm to 2 mm in various colours to make it legible for

seniors, partial vision impaired etc. All the facility name should be in

Braille, along with Gujarati, English or Hindi. The entire block of tactile

signs should be mount on wall for easy reading. The map to be installed

at specified locations and installed at height of 800 mm from ground level

complete in all respect as per Harmonized guideline & satisfaction of

Engineer in charges.

138 Providing and fixing of acrylic, non-glare, tactile audio pictorial building 1 No. 43480.50 Rupees Forty Three

layout as per the approved size, design and make, having 3 mm thick Thousand Four Hundred

No. Eighty And Paise Fifty

acrylic non glare base plate of the approved colour and non glare acrylic

cut out symbols raised 3 mm above base plate and Grade - 2 / Grade -

Braille to be integral with the sign face and be raised 0.5 mm above base

plate. The map to be installed at the specified location as per accessibility

standards shall be oriented to the position of the viewer and to be

installed at the height of 800 mm from the finished ground / floor level

and using the necessary hardware specified by the manufacturer and to

be installed complete as per design / specifications and guidelines as per

the entire satisfaction of the engineer in charge.

139 Providing and fixing Braille indicator of size 170 mm x 35 mm for hand 165.00 Rmt. 820.12 Rupees Eight Hundred

rails of the approved design and shall have Braille dots raised 0.5 mm Twenty And Paise

Rmt. Twelve Only

above the base plate to be installed at specific locations as per direction

of Engineer in charge.

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

140 Providing and fixing conspectus tape 50 mm width on treads of staircase 672.00 Rmt. 1247.35 Rupees One Thousand

including cutting, pasting etc. as per harmonised guidelines complete in Two Hundred Forty

Rmt. Seven And Paise Thirty

all respects on the entire satisfaction of engineer in charge.

141 Providing and fixing 15 mm thick 300 mm x 300 mm Tactile warning tiles 110.00 Sq.Mt. 1207.96 Rupees One Thousand

(Attention Tiles i.e. Tactile Warning Surface Indicator (TWSI) of Johnson Two Hundred Seven

Sq.Mt. And Paise Ninety Six

Endura Tac Bottom Yellow plus or equivalent make in flooring laid on

mm thick cement mortar 1:6 ( 1 Cement : 6 Coarse sand) on new surface Only

and jointed with cement slurry including finished with flush pointing &

cleaning the surface for all floors as per detailed drawing etc. completed

as directed by Architect or Engineer in charge. These tiles shall be Anti

Skid, chemical resistant, Fade Proof, Frost - Heat & Weather proof, High

Flexural Strength, Highly durable, Stain resistance. All Tactile warning

tiles meet the specific size and dimension standard as per required by

ISO / FDIS

142 Providing and fixing HPL Partition system with door having overall height 48 No. 50778.76 Rupees Fifty Thousand

2.40 mt with Size of Cubicle : As per Drawing (W) X (D) X 2400mm (H) Seven Hundred Seventy

Nos. Eight And Paise Seventy

Door Size : 2225mm (H) x 600mm (W)

Divider Size : 2245mm (H)

Overall Height Of Cubicle : 2400mm (Including bottom Gap of 100mm)

Accessories: Standard - Merino Make Stainless Steel - 304 Grade

accessories)

a) SS "U" Channel

b) SS "F" Channel (Only Corner Unit)

c) SS Door Stopper Channel

d) SS Top Rail

e) SS Coat Hook

f) SS Privacy Thumb turn c/w Occupancy Indicator

g) SS Door Knob

h) SS Spring Loaded Butt Hinges with Cover

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

i) SS Shoe Box - 316 Grade

j) Rubber Lining for Door Stopper

k) Screws & Wall Plugs as per specification and guidelines complete in

all respect to the entire satisfaction of Engineer in charge.

143 Providing and fixing eco-friendly light weight calcium silicate false ceiling 4620.00 Sq.Mt. 1648.96 Rupees One Thousand

tiles having Tegular edge & 15 mm Thick Densified edges on the Tile Six Hundred Forty Eight

Sq.Mt. And Paise Ninety Six

Periphery for Extra Strength The Light weight calcium silicate ceiling tiles

shall have, light reflection 85% non-combustible as per B.S. 476 part IV, Only

100% humidity resistance and also having thermal conductivity0.043°

w/m KC. for the best thermal Insulation . The Light weight calcium

Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos

having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid on true horizontal level

suspended inter locking metal grid of hot dipped galvanized steel

sections (galvanizing @120 grams per Sq.Mt including both side)

consisting of main ‘T’ runner suitably spaced at joints to get required

length and size of 24X38mm made from 0.30 mm thick (minimum) sheet,

1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of

0.33mm (Minimum) sheet spaced 1200mm along spaced between main

‘T’ at 600mm centre to centre to form a grid of 1200X600mm and

secondary cross ’T’ of length 600mm and size 24x28mm made of

mm thick (Minimum) sheet to be interlocked at middle of the

1200X600mm panel to form grid of size 600X600mm resting on periphery

walls/partitions on a perimeter wall angle pre-coated steel of size

(24X24X3000mm made of 0.40mm thick (minimum) sheet with the help

of rawl plugs at 450mm centre to centre with 25mm long dry wall screws

@ 230mm interval and laying 15mm thick Densified edges light weight

calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including, cutting /making opening

for services like diffusers, grills, light fittings, fixtures, smoke detectors

etc., wherever required, Main ‘T’ runners to be suspended from ceiling

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with

12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods

with galvanized steel level clips of size 85X30X0.8mm, spaced at

1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all

T-sections shall be pre-painted with polyester baked paint, for all heights,

as per specifications, drawings and as directed by engineer-in-charge.

Note:- Only calcium silicate false ceiling area will be measured from wall

to wall. No deduction shall be made for exposed frames/opening (cut

outs) having area less than 0.30 Sq.Mt. The calcium silicate ceiling tiles

shall have NRC. Value of 0.50 (Minimum) for Fine

fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85%

non-combustible as per B.S. 476 part IV, 100% humidity resistance and

also having thermal conductivity. 0.043° w/m KC. for the best thermal

Insulation

144 Pro. And fixing single layer water proof gypsum board 12.5 mm thick 620.00 Sq.Mt. 606.95 Rupees Six Hundred Six

sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm And Paise Ninety Five

Sq.Mt. Only

suspended by GI suspender channel of size 25 mm x 3 mm with

intermediate channel of size 18 mm x 40 mm x 0.8 mm at 1220 mm

centre to centre ceiling section of size 40 mm x 35 mm x 0.55 mm at

mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x

mm at edges & drops incl. paper tap sand soffit cleat, anchor fastener,

scotch bolt connecting cleat, joining

compound top coat on ceiling incl. making necy. opening for light fitting,

diffuser etc. comp. as per detail drawing as directed

145 Providing and Fixing Dry Wall Gypsum Board Partition :Supplying and 1638.00 Sq.Mt. 2708.82 Rupees Two Thousand

constructing overall thick 100 mm partition & upto slab / Beam bottom, Seven Hundred Eight

Sq.Mt. And Paise Eighty Two

using 13mm Duraline Gypsum boards on both the sides of G.I. under

structure using Dry wall screws. 48 Kg/m3 density Rockwool insulation Only

shall be provided in the hollow space between two Duraline Gypsum

boards. The rate includes jointing & finishing of the boards with Applying

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

two coats of putty & two coats of primer & painting (Three coats) with

plastic emulsion paint of approved brand and manufacture all complete

as per architectural drawings and the directions of Engineer-in -charge /

Architect office

146 Providing and making core cut of following dia, with core cutting machine

inclusive of filling of core cut with 2hr fire retardant sealant of HILTI make

as per the manufacturer's specification, cleaning etc complete. Note: The

contractor should determine the location of beams before carrying out the

operation, getting prior approval from the Engineer in charge and cutting

of reinforcement is not allowed, if required the cutting shall be done to

machine only. The contractor to execute waterproofing treatment of the

core cut in case of wet areas complete to the satisfaction of the Engineer

in charge and give proper guarantee as directed by Engineer in charge.

0 For 40 mm Dia Pipes 15.00 Rmt. 909.00 Rupees Nine Hundred

0 For 50 mm Dia Pipes 15.00 Rmt. 1464.50 Rupees One Thousand

Four Hundred Sixty Four

Rmt. And Paise Fifty Only

0 For 75 mm Dia Pipes 30.00 Rmt. 1818.00 Rupees One Thousand

Eight Hundred Eighteen

Rmt. Only

0 For 110 mm Dia Pipes 30.00 Rmt. 2171.50 Rupees Two Thousand

One Hundred Seventy

Rmt. One And Paise Fifty

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

0 For 160 mm Dia Pipes 30.00 Rmt. 3282.50 Rupees Three Thousand

Two Hundred Eighty

Rmt. Two And Paise Fifty

147 Providing & fixing of reinforcement bars after drilling the hole of required

diameter & depth,cleaning of the same, providing / filling the hole with

Injection Mortar (HIT HY 200r of Hilti or approved equivalent),inserting

reinforcement bar etc. complete as per Manufacturers & architects

instruction. The work shall be carried out by the technical workmen's /

agency under technical supervision of Manufacturer of Injection grout

including all materials, tool tackles, labour etc completed as directed by

Engineer in charge

Rate shall be included required testing like pull-out etc. & overall design

shall be measured forces by structural design consultant.

0 8 & 10 mm. dia. bar -Depth 100mm 200 No. 189.88 Rupees One Hundred

Eighty Nine And Paise

Nos. Eighty Eight Only

0 12 mm. dia. bar -Depth 100mm 150 No. 292.90 Rupees Two Hundred

Ninety Two And Paise

Nos. Ninety Only

0 16 mm. dia. bar -Depth 100mm 100 No. 393.90 Rupees Three Hundred

Ninety Three And Paise

Nos. Ninety Only

0 20 mm. dia. bar -Depth 100mm 100 No. 494.90 Rupees Four Hundred

Ninety Four And Paise

Nos. Ninety Only

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

148 Conveyance of excavated earth / unusable material available from 2022.00 Cu.M. 681.75 Rupees Six Hundred

Excavation for foundation / Box Cutting etc. with all lead including Eighty One And Paise

Cu.M. Seventy Five Only

loading, unloading and spreading the material as and where directed by

Engineer in charge.

149 Constructing cattle trap made from ISMC 100 border and G.I. pipe 50 33.00 Sq.Mt. 6126.67 Rupees Six Thousand

mm dia HEAVY DUTY at 12 cm spacing by welding and for support 2 One Hundred Twenty

Sq.Mt. Six And Paise Sixty

Nos I.S.M.C. 100 x 75 x 6 section Fixing in prepared chamber as per

drawing by necessary arrangement etc. comp. Seven Only

150 Box cutting the road surface to proper slope and camber for making a 461.00 Cu.M. 207.40 Rupees Two Hundred

base of road work including removing the excavated stuff and depositing Seven And Paise Forty

Cu.M. Only

on the road side slope as directed upto 50 mts, lead.

151 Providing and laying W.B.M. of B.T.M.C. metal of size 45 mm to 63 mm 154.00 Cu.M. 2543.65 Rupees Two Thousand

size including 20% Grit {Stone screening} & stone dust as filler including Five Hundred Forty

Cu.M. Three And Paise Sixty

spreading, watering & consolidation by vibratory roller 80KN to 100KN

static weight. Five Only

152 Providing and laying in position controlled M-250 grade concrete for C. C. 256.00 Cu.M. 4541.97 Rupees Four Thousand

Road and curing including cost of formwork, compaction and finishing of Five Hundred Forty One

Cu.M. And Paise Ninety Seven

cement concrete road by trimix vacuum dewatering process on cement

concrete road surface by using vacuum dewatering pump, surface

floater, surface vibrator including channelling and making grooves and

rough finish to surface by providing expansion joints, construction joints

and filling of joints with asphalt filler as directed by Engineer In Charge

and as per specification.

153 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working 100.00 Rmt. 336.24 Rupees Three Hundred

pressure polythene pipes of the following outside Dia. Low density, Thirty Six And Paise

Rmt. Twenty Four Only

complete with special flange compression type fittings, wall clips etc.

including making good the wall ceiling and floor. (G)110 mm

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

154 Providing 10.0 Kg f/cm2 working pressure polyethylene pipes of the 104.00 Rmt. 678.72 Rupees Six Hundred

following outside dia. Low density, complete with special flange Seventy Eight And Paise

Rmt. Seventy Two Only

compression type fittings wall clamps etc. including making good the wall,

ceiling and floor. including Lowering, laying and jointing PVC pipes and

specials of following class and diameter including cost of conveyance

155 Providing and Construction of Junction chambers of size 0.35 x 0.35 x 12 No. 1402.89 Rupees One Thousand

0.60 mt. with Foundation Concrete in CM 1:2:4 10 Cm thick, Half Brick Four Hundred Two And

Nos. Paise Eighty Nine Only

Masonry wall in CM 1:4, 50 mm thick Flooring in CC 1:2:4 Inside Plaster

15 mm thick in C.M. 1:4 including connecting of rainwater pipe as per

detailed drawing and as directed by Engineer in charge

156 Providing and constructing filter chamber of size 2.06 x 1.21 x 1.20 mt. 2 No. 42605.84 Rupees Forty Two

with Foundation Concrete in CM 1:2:4 12.5 Cm thick, 23 cm thick Brick Thousand Six Hundred

Nos. Five And Paise Eighty

masonry in CM 1:6, Half Brick Masonry Partition wall in CM 1:4, Inside

Plaster 15 mm thick in C.M. 1:4 and cover slab 10 cm thick in CM 1:2:4 Four Only

with necessary reinforcement and Filling 30 cm with 25 to 40 mm size

Kapachi and Coarse sand for 90 cm as directed including connection

rainwater pipes as per detailed as directed by Engineer in charge

including cost of labour and material.

157 Providing water harvesting pit of 2.00 mt x 2.00mt x 4.00 mt. size for 2 No. 42605.84 Rupees Forty Two

water logging with excavation in any strata upto four meter depth, filling Thousand Six Hundred

Nos. Five And Paise Eighty

the pit with B. T. Metal 40 mm in 0.60 mt. depth with 25-40mm kapachi,

0.30 mt. depth and 2.0 mt. depth with coarse sand in layers including

making P.V.C. line for water inlet etc. as directed with 250mm dia bore

mt. depth and 150mm dia P.V.C. pipe of 10 Kg. f/Cm2 casing with gravel

packing or as directed.

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

158 Steel work welded in built up sections, framed work including cutting, 11.00 Quintal 8879.92 Rupees Eight Thousand

hoisting, fixing in position and applying a priming coat of red lead paint Eight Hundred Seventy

Quintal Nine And Paise Ninety

and two coats of matt finished oil painting etc complete. :-

(B) In trusses and trussed purlins upto 25 m. span and 15 m. overall Two Only

159 Providing corrugated PPGL Sheets (0.62 mm thick) roofing fixed with 90.00 Sq.Mt. 841.33 Rupees Eight Hundred

Galvanized iron 'J' or 'L' hooks bolts and nuts 8 m. diameter with bitumen Forty One And Paise

Sq.Mt. Thirty Three Only

and G. I. Limpet washers filled with white lead complete including ridges,

gutters etc. excluding the cost of purlins, rafters and trusses.

(1) 0.62 mm. Thick sheet

160 Plantation of trees in soil incl digging 45x45x45cm size pits, preparing 200 No. 101.00 Rupees One Hundred

soil, providing and mixing organic fertiliser, watering, planting and filling One Only

the pits as per direction including etc complete

161 Providing Tree Plants having minimum 1.00 mt height and healthy growth 200 No. 50.50 Rupees Fifty And Paise

of various kinds as like Peltoform, Gulmahore, Karanj, Ambla,Rain tree, Fifty Only

Saptparni, Cherry, Cryjeliya, Spethodiya,, Paras Pipala, Garmalo, Neem,

Borsalli, Kadam,Buch,Champo

162 Maintenance of Planted tree upto Two Year incl Watering, digging pits, 200 No. 277.75 Rupees Two Hundred

trimming applying Fertilizer, insecticide, pesticide and Pesticides and Seventy Seven And

Nos. Paise Seventy Five Only

replacing plants if necessary etc complete for raising of Plants weeding

or soil working also incl maintaining

163 Providing and fixing TREE GUARD 2.00 mt. long & of 600mm dia square 200 No. 1010.00 Rupees One Thousand

mesh of 2” x 2” and M.S. Flat of 25mm x 5 mm vertical support and three Ten Only

rings of 20 x 3 mm flat, fixing on site in CC 1:4:8, and including oil

painting two coats with red lead priming coat.

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

164 Providing erecting and fixing double coated PVC. (ISI) mark water tank of 2000.00 Liter 3.94 Rupees Three And

reqd capacity each with all necessary fittings & connection etc. comp on Paise Ninety Four Only

165 Providing and erecting open well type hori. Monoblock pump set with C.I. 1 No. 6817.50 Rupees Six Thousand

body having following specification (I) 1 H.P. single phase open well Eight Hundred

No. Seventeen And Paise

motor pump set suitable for 145 ltr / min (ii) suitable for 32 dia delivery

pipe with control panel & 10 m Fifty Only

166 Providing and fixing Drip Irrigation System of approved brand for 1 No. 1464.50 Rupees One Thousand

plantation, incl. fixing with water supply line and plantations per drawing Four Hundred Sixty Four

No. And Paise Fifty Only

and requirement.

Screen filter 7000 Ltr per Hr

167 Providing and fixing Drip Irrigation System of approved brand for 1 No. 313.10 Rupees Three Hundred

plantation, incl. fixing with water supply line and plantations per drawing Thirteen And Paise Ten

and requirement.

Pressure gauge 1" dia ( 0 - 7 Kg / Cm2

168 Providing and fixing Drip Irrigation System of approved brand for 1 No. 1818.00 Rupees One Thousand

plantation, incl. fixing with water supply line and plantations per drawing Eight Hundred Eighteen

and requirement.

Bypass assembly Gun metal

169 Providing and fixing Drip Irrigation System of approved brand for 1 No. 323.20 Rupees Three Hundred

plantation, incl. fixing with water supply line and plantations per drawing Twenty Three And Paise

No. Twenty Only

and requirement.

32 mm control valve Gunmetal

170 Providing and fixing Drip Irrigation System of approved brand for 600.00 Rmt. 8.88 Rupees Eight And Paise

plantation, incl. fixing with water supply line and plantations per drawing Eighty Eight Only

and requirement.

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

16 mm lateral HDPE pipe 2.5 kg incl fitting and Micro Tube / Dripper etc

171 Providing and fixing Drip Irrigation System of approved brand for 200 No. 1.81 Rupees One And Paise

plantation, incl. fixing with water supply line and plantations per drawing Eighty One Only

and requirement.

1.2 mm Micro tube

172 Providing and fixing Drip Irrigation System of approved brand for 200 No. 1.81 Rupees One And Paise

plantation, incl. fixing with water supply line and plantations per drawing Eighty One Only

and requirement.

Dripper 4 LPH / 8LPH

173 Providing and fixing Butterfly valve of approved brand & following internal 4 No. 893.85 Rupees Eight Hundred

dia of Brass including fixing in pipe lines etc. complete Ninety Three And Paise

Nos. Eighty Five Only

(A) 50 mm Dia

174 Providing and laying in trenches 10.0 Kg. F/Cm2 working pressure PVC 240.00 Rmt. 167.03 Rupees One Hundred

pipes for water supply line of the following outside dia. having white Sixty Seven And Paise

Rmt. Three Only

colour complete with necessary fittings, clamps etc

175 Providing and laying in trenches 10.0 Kg. F/Cm2 working pressure PVC 240.00 Rmt. 78.90 Rupees Seventy Eight

pipes for water supply line of the following outside dia. having white And Paise Ninety Only

colour complete with necessary fittings, clamps etc

176 Drilling of Pilot bore hole in all strata by mud flush DR Rig 250/300 mm 200.00 Rmt. 672.66 Rupees Six Hundred

dia. Seventy Two And Paise

Rmt. Sixty Six Only

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

177 Reaming of 250 mm /300mm dia pilot bore Hole including 200.00 Rmt. 410.06 Rupees Four Hundred

assembling lowering housing casing strainer pipes with gravel packing Ten And Paise Six Only

clay balls packing etc without cost of cement 550 mm dia.

178 Cement sealing if necessary, without cost of cement by means of Mud 1 Job 15014.66 Rupees Fifteen

Pump. Thousand Fourteen And

Job Paise Sixty Six Only

179 Lowering and removing of 100mm dia. drop line and 32mm dia. airline 1 Job 31047.40 Rupees Thirty One

for development of each water bearing zones comes across upto the Thousand Forty Seven

Job And Paise Forty Only

full depth of deep tube well of size 200mm / 250mm / 300mm dia. for the

tube well having depth 186 Mtr. and above through suitable air

compressor. The job is for complete period of development of tube well.

(without air compressor charges) (Min 8 Hrs. & upto Sand free discharge)

180 Charges of air compressor of 900 CFM /200 psi capacity for minimum 6 12.00 Hour 9519.25 Rupees Nine Thousand

running hours. Five Hundred Nineteen

Hour And Paise Twenty Five

181 Manufacture, supply and delivery of ISI marked ERW M.S. pipes 225.00 Rmt. 3272.68 Rupees Three Thousand

conforming to IS: 4270/2001 with latest amendment in random length of Two Hundred Seventy

Rmt. Two And Paise Sixty

4 to 7 meter size 250mm diameter (minimum 7.10mm thickness)

Eight Only

182 Manufacture, supply and delivery of cage type Trapezoidal shape 60.00 Rmt. 3037.90 Rupees Three Thousand

('V') wire wound low carbon, Galvanized screen pipe and stainless Thirty Seven And Paise

Rmt. Ninety Only

steel screen pipe confirming IS: 8110 GWSSB R/C (E) 250 mm dia (1)

Having Size of 1.0 mm slot (Heavy Grade).

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

183 Manufacture, supply and delivery of cage type Trapezoidal shape 15.00 Rmt. 1968.85 Rupees One Thousand

('V') wire wound low carbon, Galvanized screen pipe confirming IS: Nine Hundred Sixty

Rmt. Eight And Paise Eighty

8110 (D) 200 mm dia (1) Having Size of 1.0 mm slot (Heavy Grade).

184 Clamps made from M.S. Plate with Hole on either side with nuts & bolts 1 Pair 2173.52 Rupees Two Thousand

of Std. Make size 900mm x 100mm x 16 mm flat suitable for 250mm dia. One Hundred Seventy

Pair Three And Paise Fifty

185 Bore Plug having 100 mm height made from M.S. Plate with 3 Holes at 1 No. 1239.27 Rupees One Thousand

equal distance on circumference for nut bolts type locking arrangements Two Hundred Thirty

No. Nine And Paise Twenty

with nut bolts & lock nuts of Std. Make complete from 5mm thick M.S.

plates (for top also) suitable 250mm dia. pipe. Seven Only

186 Supply of misc. bore materials like steel bend plate suitable for ERW 300 No. 97.97 Rupees Ninety Seven

pipe of dia 250 mm of size 200m X 150mm X 6mm. And Paise Ninety Seven

Nos. Only

187 Supply of ISI marked Portland cement of store or site of works including 1.00 Tonne 5286.34 Rupees Five Thousand

all tax with loading, unloading, freight etc. complete as directed. Two Hundred Eighty Six

Tonne And Paise Thirty Four

188 Supply of well sorted "Sevalliya" gravels of size 40 mm to 63 mm 25.00 Cu.M. 2295.73 Rupees Two Thousand

including carting loading, unloading & stacking at site of work. Two Hundred Ninety

Cu.M. Five And Paise Seventy

Three Only

189 Supply of clay ball having size of 25mm to 50mm from Sicky Clay at site 25.00 Cu.M. 849.41 Rupees Eight Hundred

of work. Forty Nine And Paise

Cu.M. Forty One Only

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

190 Charges of electro logging test of bore hole. Uptron make electro logger 1 Job 18180.00 Rupees Eighteen

with carting. Thousand One Hundred

Job Eighty Only

191 Geo-hydrological ground water investigation (with vehicle charges) 1 Job 16160.00 Rupees Sixteen

deep tube well (with water sample testing) for 200mm/250mm diameter Thousand One Hundred

Job Sixty Only

deep tube well (with water sample chemical Analysis).

192 Heavy Duty clamps made from 4" x 1.5" iron strip suitable for column 2 No. 333.30 Rupees Three Hundred

pipe 1.5" to 2" length. Thirty Three And Paise

Nos. Thirty Only

(E) 100mm (4") dia. Pipe.

193 Supplying and erecting ISI marked sluice valve at position with 1 No. 4575.30 Rupees Four Thousand

necessary materials for following size of pipe diameter Five Hundred Seventy

No. Five And Paise Thirty

(vi) 100mm dia.

194 Supplying and erecting CI Swing check type non-return (Reflux) valve ISI 1 No. 3383.50 Rupees Three Thousand

marked suitable for 100mm dia. Three Hundred Eighty

No. Three And Paise Fifty

195 Supplying & Erecting Mild Steel heavy duty Flanges with rubber packing 8 No. 248.46 Rupees Two Hundred

and hardware materials for pipe connections suitable for (D) 100 mm (4'') Forty Eight And Paise

Nos. Forty Six Only

196 Supplying & erecting G.I. Bend for pipe connection suitable for 3 No. 646.40 Rupees Six Hundred

(g) 100 mm (4") Forty Six And Paise

Nos. Forty Only

197 Providing and fixing concealed centre point to wall ceiling and floor 200.00 Rmt. 1486.52 Rupees One Thousand

CPVC( SDR 13.5) pipe having National Sanitation Foundation (NSF) Four Hundred Eighty Six

Rmt. And Paise Fifty Two

seal for potable water of following nominal dia, tube fittings and Z

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

clamps including making good the wall ceiling and floor etc. complete.

100 mm dia.

FIRE SAFETY WORKS

198 Providing laying, testing & commissioning of 'C' class heavy duty 489.00 Rmt. 3462.28 Rupees Three Thousand

MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, Four Hundred Sixty Two

Rmt. And Paise Twenty Eight

flanges, tapers, nuts bolts, gaskets etc. in ground including excavation &

providing cement concrete blocks as supports, anticorrosive treatment Only

with coal tar/asphalt tape as per IS 10221, refilling the trench etc. of

following sizes complete as required.

150 mm dia

199 Providing, fixing, testing and commissioning of MS. ERW Black C Class 966.00 Rmt. 461.57 Rupees Four Hundred

Heavy-duty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto Sixty One And Paise

Rmt. Fifty Seven Only

200 mm dia. And above) including cutting, screwing, welding etc. and

providing all fittings like flanges, bends, tees, elbows, reducers, clamps,

hangers etc. with painting of one coat of primer and 2 or more coats of

synthetic enamel paint of approved make / shade complete as per

specification. 25 mm dia

200 Providing, fixing, testing and commissioning of MS. ERW Black C Class 552.00 Rmt. 661.55 Rupees Six Hundred

Heavy-duty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto Sixty One And Paise

Rmt. Fifty Five Only

200 mm dia. And above) including cutting, screwing, welding etc. and

providing all fittings like flanges, bends, tees, elbows, reducers, clamps,

hangers etc. with painting of one coat of primer and 2 or more coats of

synthetic enamel paint of approved make / shade complete as per

specification. 40 mm dia

201 Providing, fixing, testing and commissioning of MS. ERW Black C Class 340.00 Rmt. 894.86 Rupees Eight Hundred

Heavy-duty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto Ninety Four And Paise

Rmt. Eighty Six Only

200 mm dia. And above) including cutting, screwing, welding etc. and

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

providing all fittings like flanges, bends, tees, elbows, reducers, clamps,

hangers etc. with painting of one coat of primer and 2 or more coats of

synthetic enamel paint of approved make / shade complete as per

specification. 50 mm dia

202 Providing, fixing, testing and commissioning of MS. ERW Black C Class 128.00 Rmt. 1149.38 Rupees One Thousand

Heavy-duty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto One Hundred Forty Nine

Rmt. And Paise Thirty Eight

200 mm dia. And above) including cutting, screwing, welding etc. and

providing all fittings like flanges, bends, tees, elbows, reducers, clamps, Only

hangers etc. with painting of one coat of primer and 2 or more coats of

synthetic enamel paint of approved make / shade complete as per

specification. 65 mm dia

203 Providing, fixing, testing and commissioning of MS. ERW Black C Class 238.00 Rmt. 1435.21 Rupees One Thousand

Heavy-duty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto Four Hundred Thirty

Rmt. Five And Paise Twenty

200 mm dia. And above) including cutting, screwing, welding etc. and

providing all fittings like flanges, bends, tees, elbows, reducers, clamps, One Only

hangers etc. with painting of one coat of primer and 2 or more coats of

synthetic enamel paint of approved make / shade complete as per

specification. 80 mm dia

204 Providing, fixing, testing and commissioning of MS. ERW Black C Class 236.00 Rmt. 2009.90 Rupees Two Thousand

Heavy-duty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto Nine And Paise Ninety

Rmt. Only

200 mm dia. And above) including cutting, screwing, welding etc. and

providing all fittings like flanges, bends, tees, elbows, reducers, clamps,

hangers etc. with painting of one coat of primer and 2 or more coats of

synthetic enamel paint of approved make / shade complete as per

specification. 100 mm dia

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

205 Providing, fixing, testing and commissioning of MS. ERW Black C Class 241.00 Rmt. 2978.49 Rupees Two Thousand

Heavy-duty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto Nine Hundred Seventy

Rmt. Eight And Paise Forty

200 mm dia. And above) including cutting, screwing, welding etc. and

providing all fittings like flanges, bends, tees, elbows, reducers, clamps, Nine Only

hangers etc. with painting of one coat of primer and 2 or more coats of

synthetic enamel paint of approved make / shade complete as per

specification. 150 mm dia

206 Supplying and fixing single headed internal / external hydrant valve with 26 No. 10922.14 Rupees Ten Thousand

instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel Nine Hundred Twenty

Nos. Two And Paise Fourteen

ISI marked conforming to IS 5290 (Type -A) with blank Stainless

Steel cap and chain as required : Single headed Stainless Steel Only

207 Providing and fixing, testing and commissioning of C. I. Butterfly valve 21 No. 3102.72 Rupees Three Thousand

conforming to IS:13095 class PN 16 rating with Fittings, Flanges, Nut One Hundred Two And

Nos. Paise Seventy Two Only

bolts, Washers, Gaskets etc. of size: 50mm Dia

208 Providing and fixing, testing and commissioning of C. I. Butterfly valve 2 No. 4454.10 Rupees Four Thousand

conforming to IS:13095 class PN 16 rating with Fittings, Flanges, Nut Four Hundred Fifty Four

Nos. And Paise Ten Only

bolts, Washers, Gaskets etc. of size: 80mm Dia

209 Providing and fixing, testing and commissioning of C. I. Butterfly valve 17 No. 5503.49 Rupees Five Thousand

conforming to IS:13095 class PN 16 rating with Fittings, Flanges, Nut Five Hundred Three And

Nos. Paise Forty Nine Only

bolts, Washers, Gaskets etc. of size: 100mm Dia

210 Providing and fixing, testing and commissioning of C. I. Butterfly valve 18 No. 8558.74 Rupees Eight Thousand

conforming to IS:13095 class PN 16 rating with Fittings, Flanges, Nut Five Hundred Fifty Eight

Nos. And Paise Seventy Four

bolts, Washers, Gaskets etc. of size: 150mm Dia

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

211 Providing, installation, testing and commissioning of non-return valve of 5 No. 3535.00 Rupees Three Thousand

following sizes confirming to IS:5312 complete with rubber, gasket, GI Five Hundred Thirty Five

Nos. Only

bolts, nuts, washers etc. as required : 50mm Dia

212 Providing, installation, testing and commissioning of non-return valve of 4 No. 7047.78 Rupees Seven

following sizes confirming to IS:5312 complete with rubber, gasket, GI Thousand Forty Seven

Nos. And Paise Seventy Eight

bolts, nuts, washers etc. as required : 80mm Dia

213 Providing, installation, testing and commissioning of non-return valve of 10 No. 18192.12 Rupees Eighteen

following sizes confirming to IS:5312 complete with rubber, gasket, GI Thousand One Hundred

Nos. Ninety Two And Paise

bolts, nuts, washers etc. as required : 150mm Dia

Twelve Only

214 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm 52 No. 6221.60 Rupees Six Thousand

dia male and female couplings duly bound with GI wire, rivets etc. Two Hundred Twenty

Nos. One And Paise Sixty

conforming to IS 636 (type-A) as required : Stainless Steel

215 Supplying and fixing first-aid Hose Reel with MS construction spray 26 No. 8295.13 Rupees Eight Thousand

painted in post office red, conforming to IS 884 complete with the Two Hundred Ninety

Nos. Five And Paise Thirteen

following as required. 20 mm nominal internal dia water hose

thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm

nominal internal dia Stainless Steel globe valve & nozzle. Drum and

brackets for fixing the equipments on wall. Connections from riser with

mm dia stop brass valve & M.S. Pipe and socket. 30 m

216 Supplying & fixing 63 mm dia Stainless Steel short branch pipe with 20 26 No. 2902.74 Rupees Two Thousand

mm nominal internal diameter size nozzle conforming to IS 903 Nine Hundred Two And

Nos. Paise Seventy Four Only

suitable for instantaneous connection to interconnect hose pipe

coupling as required : Stainless Steel

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

217 Providing, fixing, testing and commissioning of CI Two way Fire Brigade 3 No. 10368.66 Rupees Ten Thousand

Inlet as per IS: 904 having 63 mm dia inlet with blank cap and chain with Three Hundred Sixty

Nos. Eight And Paise Sixty

100 mm dia Butterfly valve necessary fittings, flanges, nut bolts, gasket

and all required accessories. 2 way-100 mm dia M.S. Pipe Six Only

218 Providing, fixing, testing and commissioning of CI Two way Fire Brigade 2 No. 12442.19 Rupees Twelve

Inlet as per IS: 904 having 63 mm dia inlet with blank cap and chain with Thousand Four Hundred

Nos. Forty Two And Paise

100 mm dia Butterfly valve necessary fittings, flanges, nut bolts, gasket

and all required accessories. 4 way - 150 mm dia M.S. Pipe. Nineteen Only

219 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS 1 No. 34562.20 Rupees Thirty Four

sheet, 1200 mm in height with air release valve on top and flanged Thousand Five Hundred

No. Sixty Two And Paise

connection to riser, drain arrangement with 25 mm dia gun metal wheel

valve with required accessories, pressure gauge and painting with Twenty Only

synthetic enamel paint of approved shade as required.

220 Providing, fixing, testing & commissioning of 15mm dia quartzite bulb 528 No. 463.59 Rupees Four Hundred

type sprinklers of rating 68 degree centigrade with required accessories : Sixty Three And Paise

Nos. Fifty Nine Only

Pendent Sprinkler

221 Providing, fixing, testing & commissioning of 15mm dia quartzite bulb 528 No. 476.72 Rupees Four Hundred

type sprinklers of rating 68 degree centigrade with required accessories : Seventy Six And Paise

Nos. Seventy Two Only

Upright Sprinkler

222 Providing, fixing, testing & commissioning of Pressure Switches for 5 No. 1451.37 Rupees One Thousand

automation of fire pumps. Pressure switches shall be double pole single Four Hundred Fifty One

Nos. And Paise Thirty Seven

throw type suitable for 3 phase supply with diaphragm. Aluminium

Enclosure with IP 66 protection as required. Only

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

223 Providing & fixing flow switch in following sizes M.S. pipe including 8 No. 5529.75 Rupees Five Thousand

connection etc as required. 100mm dia Five Hundred Twenty

Nos. Nine And Paise Seventy

224 Providing, fixing, testing & commissioning of installation control valve of 1 No. 48387.08 Rupees Forty Eight

cast iron body, brass/bronze working parts comprising of water motor Thousand Three

No. Hundred Eighty Seven

alarm, bronze seat clapper, clapper arm and hydraulically driven

mechanical gong bell to sound continuous alarm when the wet And Paise Eight Only

riser/sprinkler system activates, pressure gauges, emergency releases,

strainer, pressure switch, cock valve complete with drain valve and

bypass, test control box, ball valves, MS pipe of required size, flanges,

orifice plate, gasket etc of following sizes as required : 150mm dia

225 Supplying, Installation, Testing and commissioning of SS Flexible drops 528 No. 1105.95 Rupees One Thousand

1000mm to 1500mm Long. Unbraided, Maximum Service pressure One Hundred Five And

Nos. Paise Ninety Five Only

175PSI,.Sprinkler Flexible Drop system is a ready to use assembly to fit

sprinkler heads in desired location in a suspended ceiling. It easily

positions the sprinkler in centre of the ceiling tile at a correct height

226 Supplying and fixing orifice plate made out of 6 mm thick stainless steel 26 No. 1659.43 Rupees One Thousand

(Grade 304) with orifice of required size to be fitted between flange & Six Hundred Fifty Nine

Nos. And Paise Forty Three

landing valve of external and internal hydrants to reduce pressure at the

outlet to the level of 3.5 kg/cm2 complete as required. Only

227 Providing, fixing, testing and commissioning of SS Pressure gauge 200 6 No. 2488.64 Rupees Two Thousand

Kg 100mm dia 3/8 BSP connection with needle valve with SS U tube. Four Hundred Eighty

Nos. Eight And Paise Sixty

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

228 Providing, fixing, testing and commissioning of 25 mm dia Air Release 5 No. 1796.79 Rupees One Thousand

Valve and Ball Valve assembly on top of each riser for Air release Seven Hundred Ninety

Nos. Six And Paise Seventy

system. 25 mm dia

229 Providing and fixing, testing and commissioning of Inspector test 16 No. 7603.28 Rupees Seven

assembly complete with test valve, sight glass sectional drain valve, Thousand Six Hundred

Nos. Three And Paise Twenty

union; necessary piping, threading, jointing as per drawing.25mm dia.

Eight Only

230 Providing & fixing of CO2 type Fire Extinguisher of capacity 4.5 kg filled 51 No. 5253.01 Rupees Five Thousand

with Co2 Gas as per IS 15222 with control discharge mechanics, fitted Two Hundred Fifty Three

Nos. And Paise One Only

with Hose & Horn applicable on Class B fire rating 21B confirms to IS

15683 bearing ISI mark. Co2 cylinder as per IS

231 Providing & fixing of ABC type 6 Kg Fire Extinguisher Mono Ammonium 51 No. 2488.64 Rupees Two Thousand

Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Four Hundred Eighty

Nos. Eight And Paise Sixty

Controllable discharge mechanism Class A, Rating 3A & Class B rating

21B as per IS 15683 ISI MARK Four Only

232 Providing and fixing fire hose cabinet fabricated from 16 gauge M.S. 26 No. 6912.44 Rupees Six Thousand

Sheet with single or double glazed front door (with 4 mm thick glass) and Nine Hundred Twelve

Nos. And Paise Forty Four

locking arrangement, painted fire red with stove enamelled paint

"FIRE HOSE" written on front including necessary supports approximate Only

size. 750x600x250 mm deep.(EFH)

233 Providing and fixing standard fireman's axe with heavy insulated rubber 26 No. 1159.48 Rupees One Thousand

handle conforming to IS: 926 complete. One Hundred Fifty Nine

Nos. And Paise Forty Eight

234 Supplying, installing and commissioning of SS Sprinkler rosette plate. 528 No. 101.00 Rupees One Hundred

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

235 Supplying, installing and commissioning of Foot Valve with, suitable 3 No. 18685.00 Rupees Eighteen

flanges, nuts, bolts, gaskets etc. complete. 150mm dia Thousand Six Hundred

Nos. Eighty Five Only

236 Supplying, installing and commissioning of Foot Valve with, suitable 2 No. 12524.00 Rupees Twelve

flanges, nuts, bolts, gaskets etc. complete. 80mm dia Thousand Five Hundred

Nos. Twenty Four Only

237 Supply, Installation, Testing and Commissioning of S.S. Ball Valves with 12 No. 1515.00 Rupees One Thousand

all fittings required. 25mm dia. Five Hundred Fifteen

Nos. Only

238 Supply, Installation, Testing and Commissioning of S.S. Ball Valves with 11 No. 1414.00 Rupees One Thousand

all fittings required. 15mm dia. Four Hundred Fourteen

Nos. Only

239 Supplying, installation, testing and commissioning of Electric driven Main 2 No. 587557.40 Rupees Five Lakh(s)

Fire Pump suitable for automatic operation and consisting of following, Eighty Seven Thousand

Nos. Five Hundred Fifty

complete in all respects, as required : Horizontal type, single stage,

centrifugal, split casing pump of cast iron body & bronze impeller with Seven And Paise Forty

stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP

Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM,

suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP

protection for enclosure, horizontal foot mounted type with Class-'F'

insulation, conforming to IS-325. M.S. fabricated Common base plate,

coupling, coupling guard, foundation bolts etc. as required. Suitable

cement concrete foundation duly plastered with anti vibration pads.

so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

240 Supplying, installation, testing and commissioning of diesel engine driven 1 No. 864055.00 Rupees Eight Lakh(s)

main fire pump suitable for automatic operation and consisting of Sixty Four Thousand

No. Fifty Five Only

following, complete in all respects, as required : (Diesel Driven Pump)

Horizontal type, single stage, centrifugal pump of cast of iron body and

bronze impeller with stainless steel shaft, mechanical seal conforming to

IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel

engine conforming to relevant IS standard complete with auto starting

mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust

pipe extended upto 10 m outside pump house duly insulated with 50 mm

thick glass wool with 1.0 mm thick aluminium sheet cladding, residential

silencer, instruments and protection as per standard specification, stop

solenoid for auto stop in the event of fault with audio indications, painted

with post office red colour etc. as required. M.S fabricated, common base

plate, coupling, coupling guard, foundation bolts etc. as required. Suitable

cement concrete foundation duly plastered and with anti vibration pads.

manner so as to give a minimum 3.5kgf/cm2 pressure at the

highest/farthest point.

241 Supplying, installation, testing and commissioning of electric driven 2 No. 158986.12 Rupees One Lakh(s)

pressurisation pump suitable for automatic operation and consisting of Fifty Eight Thousand

Nos. Nine Hundred Eighty Six

following, complete in all respects, as required : (Jockey Pump)

And Paise Twelve Only

Horizontal type, single stage, centrifugal pump of cast iron body and

bronze impeller with stainless steel shaft, mechanical seal conforming to

IS : 1520. Suitable HP squirrel cage induction motor TEFC type suitable

for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of

protection for enclosure, horizontal foot mounted type with Class-'F'

insulation, conforming to IS : 325. M .S. fabricated Common base plate,

coupling, coupling guard, foundation bolts etc. as required. Suitable

cement concrete foundation duly plastered and with anti vibration pads.

180 lpm at 88 m Head

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

242 CONTROL PANELS Incomings 630A, 50kA 4 Pole MCCB, Ics=100% Icu 1 No. 255760.28 Rupees Two Lakh(s)

No. Seven Hundred Sixty

ON, OFF, trip indicating lamps Set of Copper Bus Bar 800Amps And Paise Twenty Eight

Outgoings ( Note : All outgoing feeders for pumps should have digital

lamps) Main Fire Pump 250 A, 50kA TPN MCCB, Ics=100% Icu, with fully

automatic Star/Delta starter suitable for 100 hp pump with overload

protection, current sensing type single phase preventer complete with all

switch for local/remote, auto/manual/OFF operation. Jockey Pump 125 A,

50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic

Star/Delta starter with overload protection, current sensing type single

phase preventer complete with all accessories and internal wiring

auto/manual/OFF operation. Diesel Engine Control for diesel engine

device, timers and relays as required, push buttons, start/stop in manual

mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp

and Engine on indication Battery charger suitable for 12V/24 V DC with

Ammeter All standard relays and accessories for automatic operation of

diesel engine System Controller Designing, Supply, Installation, Testing

and commissioning of system controller to control operation of main

electric fire pump, diesel pump, Pressurization pump, Terrace pump in

sequence as per specification consisting of relays, timers. Sensors,

annunciation window for fault indication, complete as per specification

243 Providing and fixing, testing and commissioning of 3.5 C X 70 Sqmm 67.00 Rmt. 587.82 Rupees Five Hundred

Aluminium armoured . of below Cables for Fire Pump Room Cabling from Eighty Seven And Paise

Rmt. Eighty Two Only

Panel to Fire Pumps

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

244 Providing and fixing, testing and commissioning of 3 C X 16 Sqmm. 176.00 Rmt. 172.71 Rupees One Hundred

Aluminium armoured. of below Cables for Fire Pump Room Cabling from Seventy Two And Paise

Rmt. Seventy One Only

Panel to Fire Pumps

245 Providing and fixing, testing and commissioning of 2 C X 1.5 Sqmm 275.00 Rmt. 108.07 Rupees One Hundred

copper armoured. of below Cables for Fire Pump Room Cabling from Eight And Paise Seven

Rmt. Only

Panel to Fire Pumps

246 Providing and fixing, testing and commissioning of GI Perforated cable 65.00 Rmt. 829.21 Rupees Eight Hundred

trays of following sizes made out of 2mm thick GI sheet including all Twenty Nine And Paise

Rmt. Twenty One Only

supports as required 300 X 50mm

247 Providing and fixing, testing and commissioning of GI Perforated cable 78.00 Rmt. 525.20 Rupees Five Hundred

trays of following sizes made out of 2mm thick GI sheet including all Twenty Five And Paise

Rmt. Twenty Only

supports as required 150 X 50mm

248 Getting Approval of Fire Hydrant and Alarm System from local fire 1 No. 252500.00 Rupees Two Lakh(s)

authority and any other relevant statutory authority at initial and various Fifty Two Thousand Five

No. Hundred Only

other stages of work, including photography & ideography as per fire

authority. Contractor shall include cost of

Total Amount put to tender (CIVIL WORKS)

Total Amount put to tender (CIVIL WORKS)

ELECTRIFICATION WORK

249 Point wiring for Modular secondary light point with 2-1.5 sq.mm & earth 243 Pt. 167.66 Rupees One Hundred

wire of 1.5 sq.mm (green) both are of ISI marked ISI marked, Voltage Sixty Seven And Paise

Pts. Sixty Six Only

rating up to 1.1 KV, class 5 flexible copper conductor as per IS 8130 and

flame retard low smoke halogen free FRLSH PVC insulated as per

IS694:2010 and BS 5831 copper wires, in below type of pipe to be

erected complete with earth continuity and necessary connection with

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

primary light with accessories erected on Metal / PVC / wooden box

covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder / ceiling rose / H. D.

Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Note:- Maximum up to 6 mtrs length, excess will

be considered as Mains for Secondary Point.

250 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 1533 Pt. 485.81 Rupees Four Hundred

(Green) both are of ISI marked, Voltage rating up to 1.1 KV, class 5 Eighty Five And Paise

Pts. Eighty One Only

flexible copper conductor as per IS 8130 and flame retard low smoke

halogen free FRLSH PVC insulated as per IS694:2010 and BS

copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H. D. Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat.III

251 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 325 Pt. 674.68 Rupees Six Hundred

both are of .ISI marked, Voltage rating up to 1.1 KV, class 5 flexible Seventy Four And Paise

Pts. Sixty Eight Only

copper conductor as per IS 8130 and flame retard low smoke halogen

free FRLSH PVC insulated as per IS694:2010 and BS 5831 copper wires

up to 10 mtr length, in below type of pipe erected with 6A Modular type

switch and hum free EME step type electronic fan regulator mounted and

accessories with earth continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary ceiling rose / H. D. Connector as

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat. III

252 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) 33 Pt. 510.05 Rupees Five Hundred

both are of ISI marked, Voltage rating up to 1.1 KV, class 5 flexible Ten And Paise Five Only

copper conductor as per IS 8130 and flame retard low smoke halogen

free FRLSH PVC insulated as per IS694:2010 and BS 5831 copper wires

up to 10 mtr length, in below type of pipe erected complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered

with appropriate front plate modules erected on / in wall / ceiling as per

pipe erected with following type of accessories

.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III

253 Point wiring for on board Looped Plug with 6A Modular type switch & 5 163 Pt. 257.55 Rupees Two Hundred

pin socket erected on PVC / Metallic/Wooden box, single mounting base Fifty Seven And Paise

Pts. Fifty Five Only

frame covered with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessoriesCat. III

254 Providing following type of Modular Type Accessories mounted with PVC

/ metallic/Wooden box, single mounting base frame covered with textured

/ metallic/white front plate, modules erected with necessary connections

as per site situation directed by Engineer In charge.

A (1)One No. SP 6 Amp. Cat.III 40 Each 151.50 Rupees One Hundred

Fifty One And Paise Fifty

Nos. Only

B (2) One No 5 pin plug Cat.III 40 Each 151.50 Rupees One Hundred

Fifty One And Paise Fifty

Nos. Only

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

D (7) Blank Plate Single Cat.III 158 Each 25.25 Rupees Twenty Five

And Paise Twenty Five

Nos. Only

C (3) Two Pin/RJ-11 Telephone Socket[A] For One Gang Cat.III 88 Each 160.59 Rupees One Hundred

Sixty And Paise Fifty

Nos. Nine Only

D (8) Computer RJ-45 socket Cat.III 194 Each 160.59 Rupees One Hundred

Sixty And Paise Fifty

Nos. Nine Only

E. (9) 16 Amp. SP one way switch Cat.III 69 Each 180.79 Rupees One Hundred

Eighty And Paise

Nos. Seventy Nine Only

F (10) 6/16Amp. Universal socket Cat.III 69 Each 199.98 Rupees One Hundred

Ninety Nine And Paise

Nos. Ninety Eight Only

G (11) 6 Amps. Bell Push Cat.III 18 Each 151.50 Rupees One Hundred

Fifty One And Paise Fifty

Nos. Only

255 Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution &

Clamps with following dia of pipes, in approved manner as directed

A (a)20 mm 900.00 Mtr 24.24 Rupees Twenty Four

And Paise Twenty Four

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

B (2) 25 mm 600.00 Mtr 33.33 Rupees Thirty Three

And Paise Thirty Three

256 Providing and erecting ISI mark Heavy class (HMS )RIGID PVC FRLS

PIPES ( Having Thickness of 1.75mm to 1.90mm ) of following size

complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed

A (a)20 mm 3530.00 Mtr 53.56 Rupees Fifty Three And

Paise Fifty Six Only

B (2) 25 mm 4760.00 Mtr 66.78 Rupees Sixty Six And

Paise Seventy Eight

257 Providing and erecting Mains with 1.1 KV grade ISI marked, Voltage

rating up to 1.1 KV, class 5 flexible copper conductor as per IS 8130 and

flame retard low smoke halogen free FRLSH PVC insulated as per

IS694:2010 and BS 5831 wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour for earth continuity of

following size (A) With medium class Rigid PVC pipe and accessories

A (a) 2 wire 1.5 sq. mm 5116.00 Mtr 62.62 Rupees Sixty Two And

Paise Sixty Two Only

B (b) 2 wire 2.5 sq. mm 2329.00 Mtr 82.82 Rupees Eighty Two And

Paise Eighty Two Only

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

258 Providing and erecting Mains with 1.1 KV grade ISI marked, Voltage

rating up to 1.1 KV, class 5 flexible copper conductor as per IS 8130 and

flame retard low smoke halogen free FRLSH PVC insulated as per

IS694:2010 and BS 5831 wire in following type of pipe to be erected in /

on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (A) with

medium class Rigid PVC pipe and accessories

A (a) 2 wire 4 sq. mm 705.00 Mtr 112.11 Rupees One Hundred

Twelve And Paise

Mtr Eleven Only

B (b) 2 wire 6 sq. mm 270.00 Mtr 147.46 Rupees One Hundred

Forty Seven And Paise

Mtr Forty Six Only

C (c) 2 wire 10 sq. mm 80.00 Mtr 236.34 Rupees Two Hundred

(use earth wire of 4 sq.mm ) Thirty Six And Paise

Mtr Thirty Four Only

D (i) 4 wire 10 sq. mm(use earth wire of 4 sq.mm 2072.00 Mtr 425.21 Rupees Four Hundred

Twenty Five And Paise

Mtr Twenty One Only

259 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte

multi stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227as (class 5 flexible copper

conductor as per IS 8130 and flame retard low smoke halogen free

FRLSH PVC insulated as per IS694:2010 and BS 5831 copper wires )

erected in existing pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required.

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

A (a) One wire 1.00 sq. mm 150.00 Mtr 12.12 Rupees Twelve And

Paise Twelve Only

B (g) One wire 16.00 sq. mm 518.00 Mtr 142.41 Rupees One Hundred

Forty Two And Paise

Mtr Forty One Only

260 Supplying & erecting approved make LAN cable of following size in 10050.00 Mtr 76.76 Rupees Seventy Six And

existing pipe as per direction[D] CAT - 6A Paise Seventy Six Only

261 Providing & Erecting 6 core fibre optic SM 9/125um double sheath, 800.00 Rmt. 60.60 Rupees Sixty And Paise

CSTA, Unitube, Outdoor cable (per m) Sixty Only

262 Providing & erecting Switch board for Computer or electric apparatus 194 Each 1133.22 Rupees One Thousand

consisting of following modular type accessories mounted with PVC / One Hundred Thirty

Nos. Three And Paise Twenty

Metallic concealed/open box with single mounting base frame covered

with textured/metallic /white front plate, modules erected with necessary Two Only

connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III

263 Decorative call bell Ting-tong box type 250 volts complete erected 57 Each 71.71 Rupees Seventy One

And Paise Seventy One

Nos. Only

264 Providing & erecting Cross Over Junction Box Supply, installation,

testing and commissioning of following sizes of cross over junction boxes

having Back Box made from hot-dip pre-galvanized zinc coated steel

sheet having specification as per IS277:2003 with base box thickness not

less than 1mm. Back Box formation should be done by assembling

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

sheared and bent modular parts. Lid of the junction box should be made

from 2.5mm thick, epoxy coated steel sheet. Lid formation should be

done by shearing, bending, and welding steel sheet to form 8mm recess

to accommodate floor tile, stone, or carpet. Trap cover screws should be

made from stainless steel for extra protection. Height adjustable support

pillars should be made from high pressure die cast aluminum and

provided with adjustable height from 55mm to 70mm. Modular side wall

of the box should be provided with knockout suitable to accommodate

raceway of 25mm and 38 mm height. The junction box should be having

IP rating of 20 with temperature handling capacity of -5˚ c to 60˚ c. The

junction box should be able to bear load up-to 2.5 Ton/m2 as per IEC

61084-1:2017 & 61084-2-2:2017 standards. Crossover junction box with

epoxy powder coated flyover should be available to make crossover of all

sizes required in BOQ and facilitate segregation and 90° crossing

between data and power wherever desired. Earth wire connector should

be provided in all the boxes. Throwaway lid should be provided free of

cost to protect from water seepage during cementing/screeding process

A 250x250x55-70mm Rec-8mm 82 Each 9439.53 Rupees Nine Thousand

Four Hundred Thirty

Nos. Nine And Paise Fifty

Three Only

B 350x350x 55-70mm Rec-8 mm 122 Each 14236.71 Rupees Fourteen

Thousand Two Hundred

Nos. Thirty Six And Paise

Seventy One Only

265 Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

aluminium die cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V, Power Factor more

than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt,LED

LED driver efficiency > 85 %

(fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings. The Engineer in

(A) Tube Light with integral driver

A (i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet Cat.III 26 Each 165.64 Rupees One Hundred

Sixty Five And Paise

Nos. Sixty Four Only

B (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat.III 103 Each 373.70 Rupees Three Hundred

Seventy Three And

Nos. Paise Seventy Only

C (v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet Cat-lll 27 Each 535.30 Rupees Five Hundred

Thirty Five And Paise

Nos. Thirty Only

266 Supplying and erecting led lamps with following wattage capacity of 220 70 Each 112.11 Rupees One Hundred

to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge Twelve And Paise

Nos. Eleven Only

protection, Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder(ii)

to 8 watts Cta.III

267 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to IS:

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt,

LED driver efficiency > 85 %

(fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings. The Engineer in

A (A) Square/ Circular shaped Surface/Recessed Mount Down light with 401 Each 427.23 Rupees Four Hundred

provision for spring loaded mounting clips complete.IP20(ii) 15 watts, Twenty Seven And

Nos. Paise Twenty Three

Surge-2 KV Cat-lll

B (A) Square/ Circular shaped Surface/Recessed Mount Down light with 209 Each 220.18 Rupees Two Hundred

provision for spring loaded mounting clips complete.IP20(i) 5-9 Twenty And Paise

Nos. Eighteen Only

watts,Surge-2 KV Cat-lll

C (B) LED Panel Light with provision for Plane front frame with translucent 423 Each 724.17 Rupees Seven Hundred

cover fixed to housing complete.IP20(v) 24 watts, 12" x 12", Surge-2 Twenty Four And Paise

Nos. Seventeen Only

D (B) LED Panel Light with provision for Plane front frame with translucent 403 Each 1794.77 Rupees One Thousand

cover fixed to housing complete.IP20(vi) 36 watts, 24" x 24", Surge- 2KV Seven Hundred Ninety

Nos. Four And Paise Seventy

Seven Only

268 Supplying and Erecting Of L.E.D. type High bay fixture having Power 2 Each 5256.04 Rupees Five Thousand

Consumption of following watts with, Input Voltage 110 - 290 V.AC with Two Hundred Fifty Six

Nos. And Paise Four Only

full efficiency, Power Factor > 0.9 with 50/60 HZ, CCVC LED Driver used

for maximum power saving, Best Quality Aluminium alloy housing and

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

aluminium Dome for better heat dissipation, CCT Cool white (6000K),

CRI 80, Beam angle > 120 degrees, working temperature -20 deg c to

+55 deg c, Body IP 65(A) 70 to 90 watts Cat.III

269 Supplying and erecting LED street light / Flood light fittings with High 15 Each 2201.80 Rupees Two Thousand

power White LEDs wattage of 3 Watt and above assembled on single Two Hundred One And

Nos. Paise Eighty Only

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminium housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/ lenses

with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency >

(fittings required LM-79 & LM-80 certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings. The Engineer in

(A) Street Light (IP-65), Surge protection -4KV integral and,Light must

have 440VAC line supply with over-voltage protection. (iii) 36 watts Cat.III

270 Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.

(fittings required LM-79 & LM-80 certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings. The Engineer in

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

A (A) Street Light (IP-65), Surge protection -4KV integral and, Light must 14 Each 3345.12 Rupees Three Thousand

have 440VAC line supply with over-voltage protection. Three Hundred Forty

Nos. Five And Paise Twelve

(i) 48 watts Cat-lll

B (B) Flood Light (IP-65), Surge protection -4KV integral and, Light must 2 Each 6088.28 Rupees Six Thousand

have 440VAC line supply with over-voltage protection(vii) Eighty Eight And Paise

Nos. Twenty Eight Only

(iii) Above 60 to 90 watts Cat-lll

C (C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot 3 Each 4819.72 Rupees Four Thousand

and spun aluminum canopy fixed with opal polycarbonate, pipe Eight Hundred Nineteen

Nos. And Paise Seventy Two

arrangement for vertical mounting driver and accessories wired upto

terminal block.IP 65 Only

(ii)32-40W Cat-lll

271 Providing and erecting Approved make Four pole moulded case circuit 4 Each 6790.43 Rupees Six Thousand

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal Seven Hundred Ninety

Nos. And Paise Forty Three

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections, Only

spreader tinned copper & complete erected With 16 G.M.S. housing.

ICS=100% of ICU only Cat III

272 Providing and erecting Approved make Four pole moulded case circuit 78 Each 6173.12 Rupees Six Thousand

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal One Hundred Seventy

Nos. Three And Paise Twelve

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections, Only

spreader tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

273 Providing and erecting Approved make Four pole moulded case circuit 4 Each 16221.61 Rupees Sixteen

breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal Thousand Two Hundred

Nos. Twenty One And Paise

current rating 200A.with variable Thermal & magnetic release suitable to

Sixty One Only

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

work on A. C. supply 50 c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S.housing ICS=100% of

ICU only Cat III

274 Providing and erecting Approved make Four pole moulded case circuit 2 Each 25228.79 Rupees Twenty Five

breaker having breaking capacity ICU of 50 KA and above at 415 V Thousand Two Hundred

Nos. Twenty Eight And Paise

having Normal current rating 400A. with variable Thermal & magnetic

release suitable to work on A. C. supply 50 c/s. With all internal Seventy Nine Only

connections, spreader tinned copper & complete erected in existing

G.M.S. housing. ICS=100% of ICU only Cat III

275 Providing and erecting Approved make Earth fault Relay suitable to 1 Each 4983.34 Rupees Four Thousand

mount with inter connection suitable to following size of moulded case Nine Hundred Eighty

No. Three And Paise Thirty

circuit breaker having CT ratio & MCCB rating as following along with

shunt trip 220V AC. with all internal connections & complete erected in Four Only

existing M. S. housing.. (2) 125 A -200 A, CT Ratio 1/200

276 Providing and erecting following additional parts for panel mounting

A (A)Extended operating rotary handle with pad lock with three position 91 Each 873.65 Rupees Eight Hundred

trip,off,on suitable for 25A to 250 A panel mounting cat-III Seventy Three And

Nos. Paise Sixty Five Only

B (B)Extended operating rotary handle with pad lock with three position 4 Each 1310.98 Rupees One Thousand

trip,off,on suitable for 400A to 630 A panel mounting cat-III Three Hundred Ten And

Nos. Paise Ninety Eight Only

277 Approved make Electrically Draw out type (EDO) 4 Pole Air circuit

breaker. Having 50 kA breaking capacity with ICU=ICS=ICW (1

sec)Vsr=690 v, Ui=1kv,impulse voltage=12 kv with following type of relay

and accessories.

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

(B) with microprocessor Release with over load, short circuit, earth fault

protection and metering display in modular design with LED display and

Test Trip button facility, CTs and auxiliary contacts, of following current

A (i) 800Amp 50 kA Cat III 1 Each 165024.91 Rupees One Lakh(s)

Sixty Five Thousand

No. Twenty Four And Paise

Ninety One Only

B (ii) 1000Amp 50 kA Cat III 2 Each 170931.39 Rupees One Lakh(s)

Seventy Thousand Nine

Nos. Hundred Thirty One And

Paise Thirty Nine Only

C (iii) 1250Amp 50 kA Cat III 3 Each 192320.16 Rupees One Lakh(s)

Ninety Two Thousand

Nos. Three Hundred Twenty

And Paise Sixteen Only

278 Supplying & erecting approved make Four Pole 415V change over switch

interior for panel mounting with operating mechanism A.C.23 duty

confirming to IS for

A (B)63 A Cat-lll 1 Each 4785.38 Rupees Four Thousand

Seven Hundred Eighty

No. Five And Paise Thirty

Eight Only

B (C)100-125A Cat-lll 8 Each 7790.13 Rupees Seven

Thousand Seven

Nos. Hundred Ninety And

Paise Thirteen Only

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

C (D)200A Cat-lll 1 Each 12241.20 Rupees Twelve

Thousand Two Hundred

No. Forty One And Paise

Twenty Only

279 Supplying and erecting triple pole & neutral 440V / 500V panel mounting

Copper Busbars with four equal Nos. of electrolyte bus having current

density not more than 1.6 Amp. / sq.mm (Rated current / cross section

area) duly wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary bus bar

supports /insulators, main cable socket to each bar, erected in existing

cubical panel with necessary connections.

A (A) Suitable for 100 Amp. Capacity 4.20 Rmt. 1961.42 Rupees One Thousand

Nine Hundred Sixty One

Rmt. And Paise Forty Two

B (B) Suitable for 200 Amp. capacity 10.60 Rmt. 3202.71 Rupees Three Thousand

Two Hundred Two And

Rmt. Paise Seventy One Only

D (E) Suitable for 630 Amp. capacity 4.00 Rmt. 10559.55 Rupees Ten Thousand

Five Hundred Fifty Nine

Rmt. And Paise Fifty Five

E (F) Suitable for 800 Amp. capacity 4.60 Rmt. 13199.69 Rupees Thirteen

Thousand One Hundred

Rmt. Ninety Nine And Paise

Sixty Nine Only

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

F (G) Suitable for 1200 Amp. Capacity 12.00 Rmt. 16499.36 Rupees Sixteen

Thousand Four Hundred

Rmt. Ninety Nine And Paise

Thirty Six Only

280 Providing and erecting Miniature circuit breaker single pole 0.5A to 2A 14 Each 270.68 Rupees Two Hundred

system and having breaking capacity 10 KA to be erected in existing box. Seventy And Paise Sixty

Nos. Eight Only

confirming to IS 8828/1996 with ISI Mark Cat.III

281 Providing and erecting Miniature circuit breaker single pole 6A to 25A 887 Each 112.11 Rupees One Hundred

suitable to operate on 240 V A.C. system and having breaking capacity Twelve And Paise

Nos. Eleven Only

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Mark Cat.III

282 Providing & erecting 240 V MCB double pole switch for motor & inductive

load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity

A (A) 6 to 32 Amp. Cat.III 43 Each 299.97 Rupees Two Hundred

Ninety Nine And Paise

Nos. Ninety Seven Only

B (B) 40 Amp. Cat.III 14 Each 330.27 Rupees Three Hundred

Thirty And Paise Twenty

Nos. Seven Only

283 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load

(C Curve) having 10KA breaking capacity & confirms to IS :8828 in

existing box having following capacity

A (a) 6 to 32 Amp. Cat.III 41 Each 595.90 Rupees Five Hundred

Ninety Five And Paise

Nos. Ninety Only

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

B (b)40 Amp. Cat.III 10 Each 668.62 Rupees Six Hundred

Sixty Eight And Paise

Nos. Sixty Two Only

C (c)63 Amp. Cat.III 20 Each 737.30 Rupees Seven Hundred

Thirty Seven And Paise

Nos. Thirty Only

284 Sheets steel powder coated enclosure suitable for incorporating One/Two 4 Each 176.75 Rupees One Hundred

nos. MCB. Seventy Six And Paise

Nos. Seventy Five Only

285 Providing and erecting Sheet Steel powder coated MCB distribution

board - flushed in wall mounted fitted with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB

to house appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

A (A) single phase incoming and horizontal single phase outgoing 1 Each 1062.92 Rupees One Thousand

b) sheet steel double door (IP-43))(iii6 way Sixty Two And Paise

No. Ninety Two Only

B (A) single phase incoming and horizontal single phase outgoing 12 Each 1382.89 Rupees One Thousand

b) sheet steel double door (IP-43))(iii8 way Three Hundred Eighty

Nos. Two And Paise Eighty

C (A) single phase incoming and horizontal single phase outgoing 7 Each 1791.34 Rupees One Thousand

b) sheet steel double door (IP-43))(iii12 way Seven Hundred Ninety

Nos. One And Paise Thirty

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

Item Estimated According to

Description of Item (with brief specification) Unit

No. But may be In Figure Estimated

more or less In words Quantity

D (B) three phase incoming and single phase horizontal type outgoing Per 2 Each 2806.99 Rupees Two Thousand

phase isolation type (PPI) (b) sheet steel double door (i)4 way Eight Hundred Six And

Nos. Paise Ninety Nine Only

E B) three phase incoming and single phase horizontal type outgoing Per 33 Each 3496.62 Rupees Three Thousand

phase isolation type (PPI) (b) sheet steel double door (ii)6 way Four Hundred Ninety Six

Nos. And Paise Sixty Two

F B) three phase incoming and single phase horizontal type outgoing Per 6 Each 4095.35 Rupees Four Thousand

phase isolation type (PPI) (b) sheet steel double door (ii)8 way Ninety Five And Paise

Nos. Thirty Five Only

286 Supplying & erecting Sheet Steel powder coated Cable end termination

Box Flushed in wall mounted on Top or Bottom of the MCB Distribution

Box for housing/covering Extra wires & Cables, suitable for following size

of MCB DB Box. ADD 20% more for concealed errection of distribution

A (D) Single Phase 12 Way 7 Each 467.83 Rupees Four Hundred

Sixty Seven And Paise

Nos. Eighty Three Only

B (E) Three Phase 4 Way 2 Each 596.30 Rupees Five Hundred

Ninety Six And Paise

Nos. Thirty Only

C (F) Three Phase 6 Way 33 Each 699.32 Rupees Six Hundred

Ninety Nine And Paise

Nos. Thirty Two Only

D (G) Three Phase 8 Way 6 Each 827.80 Rupees Eight Hundred

Twenty Seven And

Nos. Paise Eighty Only

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount