REPAIR TO FANS TUBE LIGHTS INTERNAL WIRING AND MISC EM REPAIRS IN NORTH SIDE OF RUNWAY AT AF STATION JODHPUR

Amount

Taking down carefully copper/aluminium point wiring light, fan, socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc. removing materials to store for keeping in safe costudy or for taking under schedule of credit and making good disturbed surface of walls, floors etc. complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits), with multistranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No drawn through and including PVC caping casing with accessories in wall/floor etc ISI marked including sunken type metal boxes covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for one light/ fan/exhaust fan point controlled by one switch/regulator including making good of disturbed surface of cement plaster, whitewash/ distemper to match with original colour complete all as specified and directed.

All as per item No.2 here-in-before but for 3 pin 5 Amps socket outlet controlled by one switch on Independent board complete all as specified and directed.

All as per item No.2 here-in-before but for 3 pin 5 Amps socket outlet controlled by one switch on same board with other switches complete all as specified and directed.

All as per item No.2 here-in-before but for One bell point controlled by one bell push on Independent board complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits), with multistranded copper conductor 2.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No drawn through and including PVC caping casing with accessories in wall/floor etc ISI marked including sunken type metal boxes covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for 3 pin 5 Amps socket outlet controlled by one switch on Independent board including making good of disturbed surface of cement plaster, whitewash/ distemper to match with original colour complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits), with multistranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No drawn through and including PVC surface conduit of 20 mm bore with accessories in wall floor etc ISI marked, including PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for one light/ fan/exhaust fan point controlled by one switch/regulator including making good of disturbed surface of cement plaster, whitewash/ distemper to match with original colour complete all as specified and directed.

All as per item No.7 here-in-before but for 3 pin 5 Amps socket outlet controlled by one switch on Independent board complete all as specified and directed.

All as per item No.7 here-in-before but for 3 pin 5 Amps socket outlet controlled by one switch on same board with other switches complete all as specified and directed.

All as per item No.7 here-in-before but for One bell point controlled by one bell push on Independent board complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits), with multistranded copper conductor 2.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No drawn through and including PVC caping casing with accessories in wall/floor etc ISI marked including sunken type metal boxes covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for 3 pin 5 Amps socket outlet controlled by one switch on Independent board including making good of disturbed surface of cement plaster, whitewash/ distemper to match with original colour complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multistranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No drawn through and including stove enamelled steel conduit dia not less than 20 mm with accessories in wall floor etc ISI mark including sunken type metal boxes covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for one light/ fan/exhaust fan point controlled by one switch/regulator including making good of disturbed surface of cement plaster, whitewash/ distemper to match with original colour complete all as specified and directed.

All as per item No.12 here-in-before but for 3 pin 5 Amps socket outlet controlled by one switch on Independent board complete all as specified and directed.

All as per item No.12 here-in-before but for 3 pin 5 Amps socket outlet controlled by one switch on same board with other switches complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits), with multistranded copper conductor 4.0 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No drawn through and including PVC caping casing with accessories in wall/floor etc ISI marked including sunken type metal boxes covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multistranded copper conductor 4.0 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for 3 pin 5 Amps socket outlet controlled by one switch on Independent board including making good of disturbed surface of cement plaster, whitewash/ distemper to match with original colour complete all as specified and directed.

S&F in replacement triple pole and earth encolsure with a three pin and earth plug with socket including 63Amp triple pole MCB 415 Volt complete all as specified and directed.

Supply and fixing in replacement LED light fitting 1x30 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver,holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

S&F switch piano 5 amps flush type single pole one way complete all as specified and directed.

S&F switch piano 16 amps flush type single pole one way complete all as specified and directed.

S&F socket outlet flush type 3 pin 5 amps complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 and 15 amps flush type complete all as specified and directed.

S&F bell push button flush type 5 Amps complete all as specified and directed.

S&F in repairs switch piano 5 amps flush type single pole one way complete all as specified and directed.

S&F in repairs switch piano 16 amps flush type single pole one way complete all as specified and directed.

S&F in repairs socket outlet flush type 3 pin 5 amps complete all as specified and directed.

S&F in repairs socket outlet 2 in 1, 3 pin 5 and 15 amps flush type complete all as specified and directed.

S&F in repairs modular switche 6 amps single pole one way complete all as specified and directed.

S&F in repairs modular sockete outlet 6 amps 5 pin combine 2 module complete all as specified and directed.

S&F in repairs modular switches 16 A single pole one way, 1 module complete all as specified and directed.

S&F in repairs modular socket 6/16 A 2/3 pin combined 2 module complete all as specified and directed.

S&F in repairs step fan speed regulator 5 steps, 120W of 2 module complete all as specified and directed.

S&F in repairs of ding dong bell AC 230 V single pole complete all as specified and directed.

Material and labour for submain wiring with two single core PVC insulated multi stranded copper conductor cable FRLS of size 2.5 sqmm 1100 volt grade (ISI marked ) drawn through and including non metalic PVC conduit pipe medium grade ISI marked (not less than 20 mm dia)along with fittings and accessories all fixed concealed on wall and surface on ceiling with necessary fittings, with one 2.5 Sqmm single core multi stranded copper conductor cable FRLS as earth continuity to common earth doly as earth wire, including dismantling and taking down old unserviceable submain wiring complete all as specified and directed by the Engineer in Charge. Note : Two runs of main wire and one run of earth wire & one run of casing caping shall be measured and paid as one length.

All as per item No.29 here-in-before but for 2 run of 4 Sqmm cable and one run of 4 sqmm cable for earth wire complete all as specified and directed.

All as per item No.29 here-in-before but for 2 run of 6 Sqmm cable and one run of 6 sqmm cable for earth wire complete all as specified and directed.

S&F in repairs MCB 5 to 32 Amps SP 10 KA,240V 'C' Series complete all as specified and directed.

S&F in repairs MCB 40 to 63 Amps SPN 10 KA,240V 'C' Series complete all as specified and directed.

S&F in repairs MCB 40 to 100 Amps TPN 10 KA,415 V 'C' Series complete all as specified and directed.

S&F in replacement steped type elecrtonic fan regulator flush type on the existing phenolic laminated sheet of 240 V complete all as specified and directed.

S&F in replacement ceiling rose polycarbonate, isolated body 65 X 50 mm 2 to 3 terminal complete all as specified and directed.

S&F in replacement single pole and neutral enclosure with a two pin and earth plug and socket including one single pole 240V MCB 20 amps complete all as specified and directed.

S&F in replacement factory made MCB DB SPN 8 way 240 volt with double door, IP - 43 protection system with having 200 Amps 2 Nos bus bar for neutral bar and earth bus bar fixed/concealed in wall complete and making good disturbed surfaces of wall, floor etc including necessary connection lugging with copper lugs pin/ring type complete all as specified and directed.

S&F in replacement factory made MCB DB SPN 12 way 240 volt with double door, IP - 43 protection system with having 200 Amps 2 Nos bus bar for neutral bar and earth bus bar fixed/concealed in wall complete and making good disturbed surfaces of wall, floor etc including necessary connection lugging with copper lugs pin/ring type complete all as specified and directed.

Material and labour for taking down carefully and opening, dismantling of ceiling fans 1200 mm (18") sweep cutting and taking out old burnt/damaged winding/material by any means and material and labour for re-winding the same with supper enamelled copper wire of existing/same SWG including all insulating material all as required as per standard practice, varnishing the same and drying, cleaning fan with recommended quality grease/oil, re-assembling and refixing including replacement of unserviceable other parts, clamps, canopy, capacitor provision of PVC copper twisted conductor three core of size 0.5 sqmm of required length and testing complete all as specified and directed by Engr-in-charge. Note :- Spare parts shall be measured and paid seperately under respective items of BOQ.

All as per item No. 40 above but for 1400 mm (56") sweep ceiling fan complete all as specified and directed.

All as per item No 40.00 above but for Exhaust fan flame proof/with out flame proof of 230 mm (9") sweep complete.

All as per item No 40.00 above but for Exhaust fan flame proof/with out flame proof of 300 mm (12") sweep complete.

All as per item No 40.00 above but for Exhaust fan flame proof/with out flame proof of 450 mm (18") sweep complete.

All as per item No 40.00 above but for wall mounting fan of 400 mm (16") sweep complete.

Supply only Gun metal bush of ceiling fans any type or any sweep including cutting of grooves for fixing of bearing instead of bush any type/any size complete all as specified and directed.

Supply only ball bearing suitable for ceiling fan of 1200 mm (48'')/1400 mm(56'') sweep complete all as specified and directed.

Supply only ball bearing of any sweep suitable for exhaust fans/pedestal fans of any make & size complete all as specified and directed.

Supply only capacitor for any type of fan, 230 volts AC of capacity 2.5 MFD including necessary soldering complete all as specified and directed.

Supply only capacitor for any type of exhaust fan/pedestial fan/air circulator fan 230 volts AC of capacity 4 MFD including necessary soldering for exhaust fans/pedestal fans complete all as specified and directed.

Supply only screw, clamps with nuts & bolts rubber reel with split pin for ceiling fan complete all as specified and directed.

Supply only Metalic blades any type/any size for exhaust fan of 380mm sweep (one set of three blades) complete all as specified and directed.

Supply only Metalic blades any type/any size for exhaust fan of 450mm sweep (one set of three blades) complete all as specified and directed.

Supply only metallic fan blade for ceiling fan 1200/1400 mm sweep (set of three) complete all as specified and directed.

Supply only metallic blade for wall mounted fan 230/300 mm sweep complete all as specified and directed.

Supply only metallic blade (four blade set) for exhaust fan 230/300mm sweep complete all as specified and directed.

Supply only ceiling fan down rod of size 2' (ft) long made out of 15mm bore light grade GI pipe complete all as specified and directed.

Supply only fan down rod of size 3' (ft) long made out of 15mm bore light grade GI pipe complete all as specified and directed.

Supply only fan down rod of size 6' (ft) long made out of 15mm bore light grade GI pipe complete all as specified and directed.

Supply only fan down rod of size 5' (ft) long made out of 15mm bore light grade GI pipe complete all as specified and directed.

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

M&L for earthing in repairs complete with galvanised steel earth electrode 60cm x 60cm x 6 mm buried directly in ground vertically to depth not less than 2.25m below normal ground level with top edge of the earth plate at a depth not less than 1.5m below ground level connected to and including GI earth lead wire 4mm dia by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil, PCC (1:3:6) Type C1 in earth pit chamber, precast RCC cover 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15 mm bore medium grade GI protection pipe, test point etc. including taking out existing earthing complete all as specified and directed. Note :- The rate of above Item includes the cost of earth lead and GI protection pipe up to 7.5 Metres. GI earth lead beyond 7.5 Metre shall be measured and paid for separately.

Supply and fixing in replacement LED light fitting 1x 20W, 4 feet, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement switch flame proof rotary type with termination box in LM6, 16A, single pole 250V Complete with all accessories.

Supply and fixing in replacement flame proof/weatherproof 4 Way junction box 100mm dia with all accessories complete all as specified and directed.

Supply and fix in replacement LED Aviation obstraction light red colour comprising of aluminium housing with polycarbonate enclosure single phase 240volts with suitable fixing arrangements on GI pipe 40mm dia 1.5mtrs hight at the top of runway cotroller hut complete all as specified and directed.

S&F in replacement two pole and earth enclosure with a two pin and earth plug with socket with 32 Amp SPN MCB, 230 Volt complete all as specified and directed.

Supply and fixing in repairs ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)complete all as specified and directed. Note:- The old U/S ceiling fan shall be deposited to MES store yard by contractor.

Supply and fix in repairs exhaust fan, steel body AC single Phase, 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. Note:- The old U/S exhaust fan shall be deposited to MES store yard by contractor.

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43-IK with reversal double door, recess mounted, having insulated 200 amp tinned copper bus bar, neutral bus bar, earth bar, din bar detachable gland plate, interconnection, earthing connection blanking plates in unused spaces as required suitable in TPN, 415 volts, 4 ways.

S&F in repair MCCB, 63 Amps, 3 pole,16 KA, 415 volt with fixed thermal maganetic release type complete all as specified and directed.

Supply & fixing in repairs sheet metal enclosure vertical MCB DB TPN 04 ways, IP 43, with 200 amps rated bus bar 415 Volts suitable for and including 63 Amps TPN MCCB 36 KA as incomer, double door with magnetic locking system complete all as specified & directed.

Nvimal Engineers and Contractor

M/S SHREE BHAIRAV NATH ENTERPRISES

new india engineers

LOKESH ELECTRICAL WORKS CONTRACTOR

M/S VENUS BUILDER