Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.9 LAccepted-Finance | ₹3.9 L | L1 | Accepted-Finance L1 Bidder |
| 2 | L 2₹3.9 L+₹4,362.25 (1.12%)Rejected-Finance VILLAGE SHUKARI P O ROPA TEHSIL SAINJ DISTRICT KULLU HP | KULLU | HIMACHAL PRADESH | 172001 | ₹3.9 L+₹4,362.25 (1.12%) | L 2 | Rejected-Finance L2 Bidder |
| 3 | L 3₹4.1 L+₹17,449 (4.47%)Rejected-Finance | ₹4.1 L+₹17,449 (4.47%) | L 3 | Rejected-Finance L3 Bidder |
| 4 | L 4₹4.1 L+₹23,948.75 (6.13%)Rejected-Finance | ₹4.1 L+₹23,948.75 (6.13%) | L 4 | Rejected-Finance L4 Bidder |
Tender Value
₹4.3 L
EMD Value
₹8,700
Closing Date
22 Jul 2026, 5:00 pmClosed
EE Electrical Division HPPWD Mandi
EE Electrical Division HPPWD Mandi
Replacement of Main Panel and MCCBs in HPPWD Chief Office Building at Jail Road Mandi Distt- Mandi HP.
2026_PWD_139065_1
No.PW-MED-TA-Tender/2026- 2339-50 Dated- 02.07.2026
Open Tender
Electrical Works
Percentage
30 days
Mandi
As per SBD
13 documents required · 13 mandatory
₹350
₹8,700
18 Sept 2026
17 Jul 2026
23 Jul 2026
17 Jul 2026
22 Jul 2026
17 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying and erection of following depth CRCA sheet steel cubical pedestal enclosure of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The cubical pedestal shall be 1800mm x 1900mmx350mm deep (nominal) including Bus Bar 600 Amp. = 1 no ,. Bus Bar 200 Amp. = 1 no ,MCCB 630 amps= 1 nos MCCB 200 amps= 1 nos MCCB 100 amps= 1 nos mccb 63amps= 4 no metering set , CT Coil and internal control wiring etc. as required.complete in all respect as per entire satisfaction of Engineer- in- Charge. | 1 | Per job | 2,81,512 | ₹2,81,512 |
| 2 | S/E of MCCB 4 Pole 415 Volt. with Thermal Overload protection and short circuit protection breaking Capacity (Ics=100% Icu with positive isolation) MCCB 63 Amp. 36 ka 4 Pole Release with rotary handle as required.complete in all respect as per entire satisfaction of Engineer- in- Charge. Make ;-Havells, ABB, Legrand, L&T, schneider, C&S | 3 | Each | 15,460 | ₹46,380 |
| 3 | Supplying and fixing TP&N copper bus-bar chamber suitable for 415 volts capacity with 4 No. copper strip bus-bars each of length and x-section suitable for following current carrying capacities, enclosure made of sheet steel having thickness of 1.6mm, dust protected, duly powder painted with detachable gland plate and other accessories including drilling holes on the board, making connections, earthing etc. as required. 200 A Copper Busbar Chambers 24" (SS Enclosure). as required.complete in all respect as per entire satisfaction of Engineer- in- Charge.Make ;- Havells, ABB, Legrand, L&T, schneider,C&S | 1 | Each | 11,263 | ₹11,263 |
| 4Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.complete in all respect as per entire satisfaction of Engineer- in- Charge. Cable Make :Universal Cables,KEI,Havells,Grandley | |||||
| 4.01 | Armoured cable 25 sq. mm (3.5 core) | 30 | Per Metre | 445 | ₹13,350 |
| 4.02 | Armoured cable 50 sq. mm (3.5 core) | 30 | Per Metre | 759 | ₹22,770 |
| 5 | Dismantling of existing electrical panel and installation of new panel including Cable gland, thimbling and termination of various sizes incoming and outgoing supply cables, testing and commissioning complete. as required.complete in all respect as per entire satisfaction of Engineer- in- Charge. | 1 | per Job | 37,500 | ₹37,500 |
| 6 | Providing Insulation mat made of Synthetic Elastomer Class ‘A’, Minimum Thickness 2mm, Max use Voltage 3.3 KV, AC dielectric strength 30 KV, Max leakage current 10mA, IS : 15652 2006 standards. | 1 | Each | 6,000 | ₹6,000 |
| 7 | Providing Insulation glove made of natural rubber or synthetic Elastomer, class ‘1’, 11KV test potential, IEC 60903/ IS 4770 standards. | 1 | Each | 3,950 | ₹3,950 |
| 8 | Providing and fixing of Kit Kat fuse 600 amps including connection of incoming and outgoing supply as required.complete in all respect as per entire satisfaction of Engineer- in- Charge. | 2 | Each | 3,000 | ₹6,000 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.73 MB
SBD.pdf
Tender Documents • 4.14 MB
BOQ_206006.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .