Renovation of Administrative Building at Saurashtra University, Rajkot (Second Attempt)

Name of Work:- Renovation of Administrative Building at Saurashtra

University, Rajkot

DESCRIPTION AMOUNT

2 Interior Work ₹

3 Electrical Work ₹

4 Plumbing Work ₹

Renovation of Administrative Building at Saurashtra

University, Rajkot

A 3% CONTINGENCY ₹

B 1% LABOR CESS ₹

D CONSULTANCY FEES WITH 18% GST ₹

ITEM DESCRIPTION UNIT QTY RATES AMOUNT

DEMOLITION WORK

Demolition of brick work & stone masonry including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift

III) In cement mortar

Dismentaling tiled of stone / wooden floors & dado tiles laid in mortar including stacking of serviceable material as and disposal of unserviceable materials with all lead

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them

3 within all lead and lift. Each 4.00 ₹ 266.81 ₹

(ii) Exceeding 3 Sq.M. in area

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps including stacking the materials with all lead and lift. (for any dia. of pipe)

Dismantling sanitary fittings like wash basin W.C. pan Indian and European type, flushing tank etc. including stacking the materials with all lead and lift.

Removing and scraping of old deteriorated plaster/Paint of any thickness from wall / R.C.C member including stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift.

Dismentaling of sheet roofing including G.I. Sheet, Poly Carbonate Sheet, gypsum/grid ceiling, ridges, Hips, Valleys, Gutters etc. stacking of serviceable materilas and

disposal of unserviceable materials with all lead and lift.

Conveyance charges of earth lime, murrum, building rubbish, manure, garbage, sludge, excavated rock, fly ash, aggregate of any kind etc. comp. from any height upto lead

Carrying out wall treatment for termite control including spraying with chemical solution in oil base including labour and material Using Chlorpyriphos 20 ECAs per IS

9 6313 part - II (1% concentration by mass) is recommended i.e one litre chemical emulsion diluted with 19 liter oil base. Total solution will be 20 liters inclusive of one liter Sqm 106.00 ₹ 46.09 ₹

chemical emulsion application at the rate of 7.5 litre chemical / Sqm of surface is recommended as per I.S.

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg/Sqcm in super structure upto floor two level In cement mortar 1:6 (1

cement :6 fine sand)

(B) Conventional

Half brick masonry in common brunt clay building bricks having crushing strength not less than 35Kg/Sq.Cm.in Cement mortar 1:4 (1-Cement:4-coarses) in super

(B) Conventional

Providing 10 mm thick cement plaster in single coat on for plastering on ceilings and soffits of stairs upto floor two level finished even and smooth in [I] Cement mortar

12 1:3 (1 cement : 3 fine sand) including curing etc complete. Sqm 21.00 ₹ 140.51 ₹

Providing 15mm thick cement plaster in single coat on Rough (Similar) side of single or half brick walls for interior plastering upto floor two level and finished

even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand). Rate shall be inclusive of hexagonal chickenmesh at junction of concrete and brick work. Minimum width

13 of the chicken mesh shall be 150 mm covering the brick / concrete surface equally as directed by EIC. Sqm 46.00 ₹ 349.40 ₹

Providing 20 mm thick double coat mala cement plaster on interior / exterior brick / concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel

including scaffolding curing etc. complete. Rate shall be inclusive of hexagonal chickenmesh at junction of concrete and brick work. Minimum width of the chicken mesh

shall be 150 mm covering the brick / concrete surface equally as directed by EIC.

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3 sand) and

8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) curing etc. complete. Rate shall be inclusive of hexagonal chickenmesh at junction of concrete and brick work.

Minimum width of the chicken mesh shall be 150 mm covering the brick / concrete surface equally as directed by EIC.

Applying two coats of Birla or Asian acrylic lapy (putty) & two coats of primer of approved brand and manufacture on new wall surface to give an even shade as directed by

Engineer-in-charge.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing

the surface free from mortar dropping sand other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint with wall primer on wall surface (two coats) to give an required shape even shade after thoroughly brushing

the surface to remove all dirt, and remains of loose powdered materials.etc complete

Providing and laying 24" x 24" vitrified 8 to 10 mm thick tile flooring over 20mm (average) base of cement mortar 1:6 (1 cement : 6 coarse sand) by adhesive material

18 on new surface including jointed with color cement slurry / epoxy with matching pigment including finised with flush pointing & cleaning the surface etc. complete for Sqm 28.00 ₹ 1,458.33 ₹

antiskit as per architect's selection.

Providing and laying Vitrified tiles 8 to 10mm thick, 24'' x 24'' in toilet wall as per drawing; on 10mm thick cement plaster 1:3 (1-cement : 3 coarse sand) and jointed

19 with white cement slurry / epoxy with matching pigment as per architect's selection. Sqm 46.00 ₹ 1,183.19 ₹

Providing and fixing 18 mm thick granite slab of approved colour and quality, machine cut and polished on one side, laid/fixed in required locations over prepared base

using suitable adhesive or cement mortar as specified. The granite slab shall be properly cut to required sizes, edges finished neatly, and laid true to line and level. The

work shall include all materials, cutting, edge finishing, fixing, curing, labour, tools, scaffolding, loading, unloading, transportation and all leads complete as per approved

drawings and instructions of the Architect / Engineer-in-Charge.

Providing and laying Luxury Vinyl Tile (LVT) / PVC wooden flooring & skirting planks of thickness approx. 5 mm with wear layer, laid over existing tile flooring,

including thorough cleaning of the existing surface, minor surface preparation and levelling wherever required, application of manufacturer’s recommended adhesive,

21 cutting and laying of planks in required pattern, proper alignment, finishing, and cleaning complete as per manufacturer’s specifications and instructions of the Architect. Sqm 196.00 ₹ 1,000.00 ₹

Make: Merino Laminates or equivalent

WATERPROOFING WORK

Toilet Sunken Waterproofing

Providing & Applying waterproofing work shall include complete surface preparation by thoroughly cleaning the RCC surface, opening all cracks and construction joints in

a 25 mm × 15 mm “V” groove and filling them with Polymer Modified Mortar using BRONCO CEMREPAIR PMC or equivalent, followed by forming a proper roundel at all

slab–wall junctions using cement–sand mortar admixed with an integral waterproofing compound BRONCO CEMKRETE or equivalent. After preparation, a two-component

waterproof coating shall be applied by providing and applying BRONCO CEMGUARD PLUS or equivalent at a consumption of 1.5 kg/m² in two coats over the RCC surface.

The work further includes pipe sleeve packing using non-shrink polymer grout BRONCO CEMREPAIR PMC or equivalent, and necessary patching with an epoxy bonding

agent BRONCO CEMSHIELD EBA or equivalent. Including a 75 mm thick brick-bat layer shall be laid with proper slope, using cement mortar admixed with BRONCO

CEMKRETE LW or equivalent at 2% by weight of cement, with the note that rate and consumption shall vary for higher thickness. including Laying Brick bat of thickness

75mm as per slope admixed with BRONCO CEMKRETE LW @ 2% by w/o Cement All complete with manufacturar specifications etc. complete with 10 yrs. Warranty

Make: Dr. Fixit / Forsoc / Sika / Bronco or equivalent

Toilet Wall Waterproofing

Providing and applying a single coat of bonding agent using BRONCO CEMKRETE or equivalent, and carrying out patch repair work using BRONCO CEMREPAIR PMC or

23 equivalent, ensuring proper surface preparation and bonding over toilet wall surfaces. All complete with manufacturar specifications etc. complete with 10 yrs. Warranty Sqm 46.00 ₹ 434.00 ₹

Make: Dr. Fixit / Forsoc / Sika / Bronco or equivalent

Removing existing loose/damaged plaster carefully from the specified surface and preparing the surface properly by cleaning, hacking and removing dust, debris and loose

materials, and thereafter providing and applying 20 mm average thickness waterproof cement plaster in CM 1:3 (1 cement : 3 sand) mixed with approved integral

waterproofing compound for internal walls conforming to IS 2645 such as Dr. Fixit LW+, Fosroc Conplast WL, Sika Plastocrete or equivalent in dosage as per

manufacturer’s specification. The plaster shall be applied in two coats over wetted surface, properly compacted and finished smooth, ensuring proper line, level and

24 alignment with adjoining plaster surface, including making 50 mm × 50 mm gola/fillet at wall and floor junctions wherever required, complete with curing for minimum 7 Sqm 47.00 ₹ 490.00 ₹

days, scaffolding, labour, tools and all leads & lifts. The rate shall include removal and disposal of old plaster, surface preparation, materials, labour, curing and all incidental

charges complete as directed by the Engineer-in-Charge, and measurement shall be done in square meter of finished surface area. The rate for new plaster has not been

considered in this.

Make: Dr. Fixit / Forsoc / Sika / Bronco or equivalent

DOOR WINDOW WORK

Single Leaf Flush Door with polish Wooden Frame:

Providing & fixing in position 40 mm thick Wooden Single shutter Flush Door with 1 mm thick Venner on both sides with 10 x 40mm lipping patti with Teak wood on all

edges inclusive of SS fixtures & fittings, such as Stainless Steel Handle Back to back Fixing SS Grade-304 on both sides, tower bolts, mortise locking arrangement,

Concealed Cam efficient door closer, slide Track arm, Hold open, fire rated, CE as per vendor details, Mortise Cylinder dead Lock case, 55 mm Backset, 24 mm Forend

25 profile Thumb Turn Cylinder with key operation, aluminum ventilation grill As per Drawings, powder coated, Ball Bering Butt Hinge, SS304,SSS,4"X3"X3 MM -2BB, Square Sqm ₹ 13.00 ₹ 6,000.00 ₹

corner, with timber door screw (926.32.160) with Glass Vision Panel having provision for access control locking system as per client's requirement & as per architect's

detailed drg and design complete and as approved by Project Manager.

Make of Laminate: Green Century or equivalent

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as details etc complete for Ventilation.

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (A) In beams and joists,

channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like

Applying priming coat over new steel and other metel surface after and including preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter and

scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the

surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter.

Providing and fixing 6 mm thick multiwall polycarbonate roofing sheet of approved colour and transparency, fixed over the existing MS / aluminium supporting

framework using self-drilling Hilti screws with EPDM washers, aluminium pressure caps / strips and necessary fixing accessories. The sheets shall be properly placed with

required overlap and slope, including end closures, aluminium U-profiles, H-jointers, and sealed with approved weather grade silicone sealant to prevent leakage. The work

shall include cutting, drilling, sealing, fixing and finishing, along with all necessary fittings, scaffolding and labour, complete in all respects as directed by the Engineer-in-

Make: Lexan / Sabic or equivalent

Providing and fixing Signages made from SS 304 Grade in 1 mm thick SS plate with eateching as per design and filling the black or any color as per requirement of

30 architects with any size with fitting and Including all accessories, material & labor complete as directed by Architect/Engineer–in–charge. Sq Inch 37.00 ₹ 53.00 ₹

Description Unit Qty Rate Amount

Gypsum Ceiling:

Providing and fixing MF suspended false ceiling system using GypSerra™ patented metal framework with single layer of 12.5 mm thick Gypboard® Plain

(IS 2095 Part 1:2011 certified), including all materials, labour, tools and accessories, complete as per manufacturer’s specifications and approved

drawings. The ceiling shall comprise GypSerra™ perimeter channel fixed to brick/RCC walls with 6×40 mm PVC anchors at 600 mm c/c, GypSerra™

ceiling angles suspended from RCC slab using Gyproc® soffit cleats, rawl plugs (Ø8×45 mm) forming a grid of 1220×1220 mm, GypSerra™ intermediate

1 channels fixed with M6 hex bolt & nut or metal-to-metal screws, and GypSerra™ ceiling sections fixed perpendicular at 457 mm c/c using Gyproc® Sqm 143.00 ₹ 1,200.00 ₹

connecting clips. The boards shall be screw-fixed with approved drywall screws at specified spacing, including provision of shadow line bead where

required. Joints shall be treated with Gyproc® joint paper tape and Pro-Fill jointing compound to achieve a smooth, flush finish ready for painting. The

system shall use GI sections conforming to IS 513 with galvanised coating as specified, suitable for the recommended load, complete in all respects.

Make: Saint Gobain Gyproc / Armstrong or equivalent

Providing and fixing acoustic panel having thickness of 9mm on existing plain gypsum board ceiling comprising factory-made acoustic panel of

approved thickness and size, fixed directly over gypsum board surface using recommended adhesive / mechanical fasteners.The item shall also include

providing and fixing 12 mm thick BWP/BWR grade plywood box or backing support at required locations above the gypsum board ceiling for

hanging/suspending decorative or pendant light fixtures, properly anchored to the ceiling framework to ensure adequate load bearing capacity. The

work shall include surface preparation, cutting to required size, alignment, fixing, edge finishing, adhesives, tapes, accessories, scaffolding, loading,

unloading, transportation and all leads complete as per approved drawings and instructions of the Architect / Engineer-in-Charge.

Make: Ecotone / Amazone / Marco or equivalent

Providing and applying of POP Punning upto average 12 mm thick to make surface smooth and levelled and as directed by the Project Manager. POP

powder of Gyproc Xpert (Gypsum stucco plast of premium fine quality suitable for plastered walls and ceilings) or its equivalent approved POP material

as per the manufacturer`s detailed specifications etc. The rate shall include providing of necessary staging/scaffolding, cleaning of floor from fall off POP

3 material shall be done by the Contractor. The job shall include hacking the existing surface for proper bond and also include making groove as per Sqm 196.00 ₹ 490.00 ₹

drawings and directed by Project Manger.

(i) Surface treated area only shall be measured for payments. No extra payment shall be paid for making groove.

Make: Saint-Gobain Gyproc / JK Lakshmi Plasto Gypsum / Birla White or equivalent

Providing and fixing 12 mm thick cement fibre board sheets for interior wall panelling, fixed on aluminium framework made of suitable aluminium

sections of required size. The aluminium frame shall be properly aligned and securely fixed to the wall with approved fasteners, screws and rawl plugs

at required spacing to form a rigid supporting grid. The cement boards shall be cut to required sizes and fixed over the aluminium framework using self-

4 drilling screws. Joints shall be treated with jointing compound and fibre tape to obtain a smooth and even surface ready for finishing. The work shall Sqm 85.22 ₹ 455.93 ₹

include all materials, aluminium framework, cutting, framing, fixing, joint finishing, scaffolding, labour, tools, loading, unloading, transportation and all

leads complete as per approved drawings and instructions of the Engineer-in-Charge.

Make: Everest / Visaka or equivalent

Providing and fixing of 12mm thick Plain MDF sheet fixed on available partition as per specified area on detailed drawing. Work complete including all

type of material, fittings, fixtures, Finish, loading, unloading, transportation, all leads, accessories, groove, adhesive, tape, headless nails, sample mockup,

5 all floor , all levels, all heights etc complete as per detailed drawings, specifications & instruction of Client/EIC. only the clear elevation area shall be Sqm 4.00 ₹ 1,800.00 ₹

measured and paid. sample mock shall be approved from Architect/Client.

Make of MDF: Century / Green Lam or equivalent

6 Providing & Laying PU Paint Finish on MDF Surface complete as per Architect Detail drawings & Specifications. Sqm 4.00 ₹ 2,800.00 ₹

Make: Asian paints / ICA Pidilite / Berger paints or equivalent

Providing and fixing 10mm thick matt finish back painted toughened glass of approved colour and shade, cut to required size and shape, fixed on top

of existing meeting table, including edge polishing, rounding of corners, necessary spacers / clear rubber pads, application of suitable adhesive / silicone

7 where required, handling, placing in position, and cleaning complete as per approved sample and instructions of the Architect. Sqm 38.00 ₹ 3,400.00 ₹

Make: Saint Gobain / Borosil / Asahi or equivalent

Providing and fixing decorative fluted Wood Plastic Composite (WPC) panel cladding of approved make, design and shade, minimum 10–12 mm thick

as per architect's selection, on the sides of the existing meeting table. The WPC panels shall be factory manufactured with uniform fluted profile and

fixed over the existing table surface using suitable adhesive and stainless steel screws/fasteners with necessary backing supports wherever required.

8 The work shall include cutting to required size, proper alignment of flutes, edge finishing, providing necessary end trims/mouldings, and all accessories Sqm 12.00 ₹ 3,200.00 ₹

required to achieve a neat and uniform appearance. The item shall be complete in all respects as per approved drawings, specifications and direction of

the Engineer-in-Charge.

Make: Merino / Greenpanel / Alstone / Ecoste / Duro or equivalent

Veneer Panelling:

Providing and fixing 4 mm thick natural veneer of approved make and shade fixed over approved substrate board mounted on aluminium as framework

& ply as backing on frame properly anchored to the wall with suitable fasteners at required spacing and pattern work as per detailed drawings. The

work shall include application of adhesive, fixing with headless nails/screws, necessary edge finishing, sanding, and application of melamine polish in

9 required number of coats to achieve uniform finish, complete in all respects. The rate shall include all materials of framework, fittings, fixtures, Sqm 103.00 ₹ 4,200.00 ₹

accessories, tapes, adhesives, transportation, loading, unloading, scaffolding, labour, wastage, sample mock-up preparation and installation at all floors,

levels and heights, as per detailed drawings, specifications and instructions of the Engineer-in-Charge.

Make: Greenlam / Century Prowud / Royal Touch or equivalent

Providing and fixing acoustic wall panelling consisting of 9 mm thick fabric wrapped acoustic panels fixed over aluminium as framework & ply as

backing, with necessary backing aluminium framework, fabric finish, edge detailing, adhesive, fasteners, cutting, fixing, finishing, scaffolding,

transportation, loading and unloading complete as per approved drawings, specifications and instructions of Architect / Engineer-in-Charge. The rate

10 shall include all materials of framework, fittings, fixtures, accessories, tapes, adhesives, transportation, loading, unloading, scaffolding, labour, wastage, Sqm 50.00 ₹ 4,500.00 ₹

sample mock-up preparation and installation at all floors, levels and heights.

Make: Ecotone / Amazone / Marco or equivalent

Honeycomb Blinds:

Supply and fixing Good quality Manual window Honey Comb blinds of approved shade & makes with scoth gaurd fabric protector.The blinds should be

approved by Architect or client.Black out Curtains sould be solar, light & UV Transmission is Zero %.

Make: Vista Window Fashions / Hunter Douglas / Mac Blinds / Marvel Blinds / Chic Blinds or equivalent

Premimum Boss Chair:

Supply and Placing in position PREMIUM EXECUTIVE REVOLVING CHAIR (High Back) as sample approved by Architect As per manufacturer

specifications. The Chair With frame in Wood,MS, PU foam in back & Moulded PU Seat,Chrome Arms with PU cladding & Synchro Mechanism, Chrome

base with 60mm Castore,& Gas Lift Work complete as per the approved sample & instruction of Architect/EIC. As per Approved Make or equivalent. The

12 rate shall be inclusive of Polishing, Plywood, Veneer, fabric, MS and all material, labour, Wastages, Transporation, Tax, Loading, Unloading, Fixing in Nos ₹ 4.00 ₹ 20,000.00 ₹

position including Protecting the same against any dents and skretched etc. at all height, all floors, all levels complete to the satisfaction of the Architect

Make: Godrej Interio / Featherlite / Durian / HOF India or equivalent

Supply and Placing in position REVOLVING CHAIR (Medium/Low Back) as sample approved by Architect As per manufacturer specifications. The Chair

With frame in Wood,MS, PU foam in back & Moulded PU Seat,Chrome Arms with PU cladding & Synchro Mechanism, Chrome base with 60mm Castore,&

Gas Lift Work complete as per the approved sample & instruction of Architect/EIC. As per Approved Make or equivalent. The rate shall be inclusive of

13 Polishing, Plywood, Veneer, fabric, MS and all material, labour, Wastages, Transporation, Tax, Loading, Unloading, Fixing in position including Protecting Nos. ₹ 18.00 ₹ 10,000.00 ₹

the same against any dents and skretched etc. at all height, all floors, all levels complete to the satisfaction of the Architect and EIC.

Make: Godrej Interio / Featherlite / Durian / HOF India or equivalent

Meeting Room Table :

Providing and fixing as per detail shape and size table unit consist table with all required necessary accessories.

Table size: @1500x6400x750

1. Top: 10mm thick matt finish back painted toughened glass +12mm th ply

2.Verticle support: As per detail drawing and reference image made form 4 mm th Veneer gurjan base ply + 19 MM th 303 BWR ply +35x35 x 2.6 mm

thick SHS /RHS metal box of tata or equivalent+ 12mm th 303 BWR ply+ 4 mm th Veneer gurjan base ply with require teak wood cornice as per

recommendation approved by architect.

14 3. Wire management with race ways : Rate inclusive of providing and fixing As per approved and requirement of schocket and quantity Pop up box of Nos. ₹ 1.00 ₹ 120,500.00 ₹

tabletop electrical WIRE MANAGEMENT BOX with same finish ( Legrand or euivalent) . The work shall be done as per the drawing, specifications, sample

approved and as directed by the Architect and Engineer-in-charge. The rate shall be for complete item inclusive of all material, labour, wastages,

necessary tools & tackles, adhesives consumable hardware & required SS 304 grade hardware/accessories of approved make for all floors, all heights,

all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be

entertained for this. The unit shall be manufactured in parts and these parts shall be assembled at site.

ELECTRICAL WORK

Description of Work Unit Rate Qty. Amount

Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having normal current

rating up to 250A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections &

complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only with Sheet metal Enclosure

Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having normal current

rating up to 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections &

complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only with Sheet metal Enclosure

Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to following size of

moulded case circuit breaker having CT ratio & MCCB rating as following along with shunt trip 220V AC. with all internal

connections & complete erected in existing M.S.housing..

Supplying and erecting, commissioning and testing of Diesel Generating set (I) Continuous Rating of 62.5 KVA ,BHP not less

than 76 BHP confirming to IS: 4722:1968 & BS:5514 having continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply

comprising of a totally enclosed air/water cooled diesel engine with multi-cylinders developing suitable BHP not less than

following capacity at 1500 RPM with 10% overload for one hour in 24 hours with standard accessories like fly wheel,

lubricating oil cooler, "A" class governor, heavy duty fuel wheel and lubricating oil filter, oil bath air filler, lubricating oil

pressure gauge, end exhaust manifold, standard set of tools with adjustable spanners, screw drivers, cylinder head to cover,

joint cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric starting equipment complete with standard heavy

duty battery, dynamo, cut-outs, ammeter, necessary wiring, pressure gauge, starter etc and heavy duty Residential type exhaust

silencer (With DEF System) and vertical hot air duct both

logged with asbestos rope, save oil trays, exhaust piping of required length, standard wall/floor mounted fuel with level

indicator and piping and drip proof alternator, self excited, self regulated, screen protected, with excitation system, capable of

delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722-

1968 with voltage regulation +/- 5% of rated voltage from no load to full load. Both the engine and alternator fitted on a

common fabricated steel base plate with antivibration mounting engine and alternator both connected to each other by

flexible flange coupling and with floor/wall mounted control panel box comprising of voltmeter ammeter, selector switches,

ACB / MCCB / MCB of adequate capacity,

indicator lamps duly wired with HRC fuses. The alternator & control panel shall be connected with provided suitable capacity

armoured cable and complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, sound absorbing material

Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU Foam of 40 Density - at least 40 mm. The resin bonded

rockwool covered from inside the canopy by perforated sheet with 3/4 mm holes, sound level not more than 75 dB at a distance

of 1 mtr, as per PVCT norms.DG set should have in built fuel tank capacity of minimum 8 hrs of continous running capacity on

full load . Erection, commissioning and satisfactory testing as per requirement with first filling of fuel (minimum up to the 80%

of fuel tank capacity), oil, etc. with guarantee / Warrantee of complete system for Two years. & with obtaining all necessary

certificate from Electrical Inspector. The Capacity and Ratings of DG sets are as below. (As per new CPCB4+ Emission norms

Engine With - Turbo Charger, EGR (Exhaust Gas Recirculation), CRS (Common Rail Fuel System), DOC (Diesel Oxidation

Catalyst), SCR (Selective Catalytic Reduction), Integrated wiring harness connected to ECU .)

Providing and erecting Approved make 100KVA servo Stabilizer with Extended Bus-bar for Cable connection, 200A MCCB with

By-pass Switch, In-Built Isolation Transformer, Indoor Duty, Oil Colled with O/L, U/V, O/L - S/c , Single Phasing, Phase reversal

Protection. Over temperature Protection. Responce Time less than 10 Mili Second, Operatin Temp - Up to 50Deg. C from

Input Voltage Range - 280-520V 3-Phase (L-L) 47-53 Hz

Output Voltage Ranhe - 415 V AC +/- 1% ( L-L)

Efficient - Min 98%

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger

with IGBT base rectifier & Inverter & sealed maintenance free SMF batteries. The charger having operating capacity for input

160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage output with

6 over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following power No ₹ 1,226,283.00 0.00 ₹

backup.with MS painted batteries stand, 10% Overload capacity for momentary load.

[L]40 KVA 3 - phase with 1Hr Backup

Supplying & erecting 16 Amp 10 KA ‘C Curve’ single pole MCB with 16 Amp. Plug socket, company fabricated powder coated

7 sheet steel enclosure erected as directed with connection. No ₹ 522.00 0.00 ₹

[A] Metal Clad Socket with metal clad top Cat-3

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp. Plug socket, company fabricated powder coated

8 sheet steel enclosure erected as directed with connection. No ₹ 654.00 0.00 ₹

[B] 15 Amp. / 5 Amp. Five pin Universal Socket cat-3

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs

9 should be used of same company of MCB to be used) - No ₹ 3,836.00 0.00 ₹

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (iii) 12 way

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs

10 should be used of same company of MCB to be used) - No ₹ 3,379.00 1.00 ₹

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (iii) 8 way

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used) -

Single phase 12 way SS Double door for horizontal single phase outgoing

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to

12 be erected in existing box. confirming to IS 8828/1996 with ISI Mark - SP MCB No ₹ 111.00 32.00 ₹

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity &

13 confirms to IS : 8828 in existing box having following capacity 6 to 32 Amp. - DP MCB No ₹ 297.00 0.00 ₹

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity &

14 confirms to IS : 8828 in existing box having following capacity 40Amp. - DP MCB No ₹ 327.00 0.00 ₹

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of

6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature &

do not incorporate any electronic component. for following Max. rating erected as directed 25 Amps.DP

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of

6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature &

do not incorporate any electronic component. for following Max. rating erected as directed 32 Amps.DP

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of

6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature &

do not incorporate any electronic component. for following Max. rating erected as directed 40 Amps.DP

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of

6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature &

do not incorporate any electronic component. for following Max. rating erected as directed 63 Amps.DP

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having

KA short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob

19 facility trip free mechanism operating for rated leakage at nominal ten volt, complete erected including all materials lugs screws No ₹ 1,925.00 1.00 ₹

etc. completed.

[b] 32A / 40A, 2 pole Single Phase Cat. II

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to

20 IS :8828 in existing box having following capacity 6 to 32 Amp. No ₹ 590.00 0.00 ₹

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to

21 IS :8828 in existing box having following capacity 40 Amp. No ₹ 662.00 0.00 ₹

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to

22 IS :8828 in existing box having following capacity 63 Amp. No ₹ 730.00 1.00 ₹

Sheets steel powder coated enclosure suitable for incorporating One/Two nos. MCB.

Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for MEDIUM

VOLTAGE installation to be erected as per IS-2551.

Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for HIGH

VOLTAGE installation to be erected as per IS.-2551.

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup

channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum

26 switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & No ₹ 3,137.00 0.00 ₹

housed in fire proof thermoplastic enclosure & transparent cover erected as required with necessary connection erected as

Providing and erecting approved make light control unit suitable to operate on 230V +20% having ON/OFF delay time of 30-50

27 seconds and having facility for Auto/manual system having two LDR lens to intensity light having capacity of 5A complete No ₹ 2,243.00 0.00 ₹

erected on section pillar with pipe and stand.

Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per direction Cat III

(D) 4 pole 440V 40 Amp.

Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling

the same and making the surface as normal ground.

Covering of cable with second class bricks or cement tiles laid cover the cable crosswise & also on both sides with covering of

7. 5 Cms. layer of sand above & below cable (16 bricks per meter)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall

31 with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(a) 4 core 2.5 Sq. mm Rmtr ₹ 269.00 0.00 ₹

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of following size of cables(c) 4 core 10 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of following size of cables(d) 4 core 16 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on

34 wall with necessary clamps or in existing trench / pipe of following size of cables (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 Rmtr ₹ 182.00 0.00 ₹

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on

35 wall with necessary clamps or in existing trench / pipe of following size of cables (d) 3 1/2 core 70 Sq. mm ( 35 Sq.1/2 mm Rmtr ₹ 375.00 0.00 ₹

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on

36 wall with necessary clamps or in existing trench / pipe of following size of cables (h) 3 1/2 core 185 Sq. mm ( 95 Sq. mm Rmtr ₹ 896.00 0.00 ₹

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.

37 Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure No ₹ 57.00 0.00 ₹

tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

(E) 4 core 4 Sq. mm / 4 core 2.5 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.

38 Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high No ₹ 90.00 2.00 ₹

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

(E) 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.

39 Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high NO ₹ 126.00 2.00 ₹

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

(A) 3 & 1/2 core 25 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.

40 Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high NO ₹ 202.00 0.00 ₹

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

(B) 3 & 1/2 core 70 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.

41 Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high NO ₹ 537.00 0.00 ₹

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

(E) 3 & 1/2 core 185 Sq. mm

Supplying under floor pregalvanised corrosion proof rectangular sheet steel cable trunking of 1.6 mm thick having with stand

point load up to 1.33 Ton & free from seepage of concrete of screed water with all accessories,Junction Box,Joints as required

42 and demanded by engineer-incharge and laying/erecting as per OEM guidelines and as per instruction of engineer incharge Mtr ₹ 1,035.00 0.00 ₹

having following size of dimensions and No of compartments (W x D x T) Cat-III

[5] 250mm x 25mm x 1.6 mm with Three Compartments

Supplying under floor pregalvanised corrosion proof rectangular sheet steel cable trunking of 1.6 mm thick having with stand

point load up to 1.33 Ton & free from seepage of concrete of screed water with all accessories,Junction Box,Joints as required

43 and demanded by engineer-incharge and laying/erecting as per OEM guidelines and as per instruction of engineer incharge Mtr ₹ 454.00 18.00 ₹

having following size of dimensions and No of compartments (W x D x T) Cat-III

[3] 100mm x 25mm x 1.6 mm with one compartment

Supply & installation of surface mounted U PVC snap-on adaptable trunking raceways, fabricated out of U-PVC to Off-White

or approved shade as per IS 733 of thickness 2.0mm for the base and sides with all accessories like removable covers, joints

,height spacer,angles complete with necessary bends, suitable sized junction boxes and tees etc, Complete.

(a)Size: 50x80mm PVC Raceways for Power & Data with 2 compartments above specifications.

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or

double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with

max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary

support( included) as per Specification and as per instruction of engineer in charge..

(5) 300 X 50 X 2.0 mm Thick

Providing & Erecting eight module pop up floor box/flushed with table surface Conform to IEC 60670-1, IEC 60670-23 & IEC

60884-1 with required items as demanded by engineer in charge with complete finishing .cat-III

HEAT / FIRE RESISTANT COATING OF CABLE : Supply and apply intumescent based coating Hilti CP 678 on cables/bunch

cables & cable tray for at least 1 mtr in every 14 mtrs for horizontal runs and to entire length of vertical runs . The coating shall

have a density in the range of 1.2 to 1.4 Kg/ L. The coating shall be non-toxic, asbestos and halogen free and shall have good

mechanical strength. The coating shall comply with IEC 332 part 3 (1992). The product shall carry test certificate for mold

resistance rating of 0 as determined by ASTM G21-96. The product should have a VOC content of approx. 60 g/l as per LEED

47 2009 and should not have any de-rating effect on the cable. Manufacturer should submitt relevant certificates for mentioned Kgs. ₹ 3,690.00 2.00 ₹

attributes. Coating shall be carried out by approved machine spraying system which will yield uniform thickness & better finish.

Firestop installation shall be done by Hilti Accredited Firestop Speciality Contractor (HAFSC) and in accordance with Hilti

guidelines . Firestop Speciality Contractor needs to submitt work completition certificate along with installation report through

Hilti documentation Software CFS DM for periodic inspection & maintenance purpose.

firestop foam Hilti CP 620 on both sides of wall, with minimum 2 hours fire rating when tested in accordance with UL

1479/ASTM-E 814, for horizontal openings in floors or slabs made of concrete/ masonry or Gypsum after passing service lines

like cable trays or cables/cable bundles. The expanding foam expands seven times its volume to fill the cavity at the time of

dispensing the material and shall fully cure within two minutes after dispensing. The product shall be age tested as per Dafstb

and DIBT standards. The product shall provide water tightness when tested for W rating as per UL standards and shall carry test

certificate for sound insualtion of 50 db when tested in accordance with ASTM E 90. The product shall carry test certificate for

mold resistance rating of 0 as determined by ASTM G21-96 and shall have a VOC content of approx. 1.3 g/l as per LEED

The product shall be tested in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for

Vibration-Time-history method and VERTEQII for seismic zone 4. The system shall be UL listed & classified and product shall

48 bear the UL and FM approval logo on the packing. The system shall be UL listed & classified and product shall bear the UL & FM Nos ₹ 4,460.00 2.00 ₹

approval logo on the packing. If none of UL test certificate comply with actual application, an EJ document prepared by a

qualified personnel and based on nearest third party tested & approved systems like UL test certificates & in accordance with

IFC guidelines shall be producted by manufacturer. A firestop submittal shall be produced by manufacturer , in accordance with

approved passive fire protection method statement, for technical approval. Firestop installation shall be done by Hilti

Accredited Firestop Speciality Contractor (HAFSC) and in accordance with Hilti guidelines and UL system test certificates or

approved EJ document. Firestop Speciality Contractor needs to submitt work completition certificate along with installation

report through Hilti documentation Software CFS DM for periodic inspection & maintenance purpose.

Point wiring for Light Point / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ceiling

complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC /

49 Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as No ₹ 445.00 15.00 ₹

per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.with medium class Rigid PVC pipe and

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

Additional Wire : Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size (A) With medium class Rigid PVC pipe and

Wire : (C) 3 wire 1.5 sq. mm

Additional Wire : Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size (A) With medium class Rigid PVC pipe and

Wire : (D) 3 wire 2.5 sq. mm

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling,

complete with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC box

covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling

rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in following type of pipe to be erected

concealed in / flushed on wall / ceiling complete with 6A Tissino Type ISI marked accessories with earth continuity erected on

Metal/PVC//Wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet. with necessary Lamp holder/ceiling rose

/ H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling complete with

6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and

54 accessories with earth continuity of following type erected on PVC / Metallic box, single mounting base frame covered with no ₹ 632.00 0.00 ₹

textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting base

55 frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories no ₹ 255.00 13.00 ₹

Do - As - Above but for 6 A x 5 pin 250 Volt switched socket outlet point at convenient location. ( Plug & Switch can be together

56 or at different location ) no ₹ 471.00 101.00 ₹

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with

Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of accessories.

[II] For 6/16A Plug with 2-2.5 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessories

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with

Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of accessories.

[III] For 16A Plug with 2-4 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessories

Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single mounting base frame covered with textured/metallic /white

front plate,modules erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

Supplying & erecting Electronic Type Cordless Call Bell erected on PVC/Metal board having portable bell push working on

D.C. & bell on 230V A.C. supply with cells / battery.

Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper wires of following size to

61 be erected as directed. Mtr. ₹ 46.00 300.00 ₹

e) 1.50 Sq.mm 3 core round PVC sheathed

Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper wires of following size to

62 be erected as directed. Mtr. ₹ 77.00 150.00 ₹

h) 2.50 Sq.mm 3 core round PVC sheathed

Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper wires of following size to

63 be erected as directed. Mtr. ₹ 106.00 50.00 ₹

i) 2.50 Sq.mm 4 core round PVC sheathed

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected

in / on wall / ceiling with following sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size

: 4 wire 4 sq. mm.

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected

in / on wall / ceiling with following sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size :

4 wire 6 sq. mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in

approved manner as directed

Supply and laying of 25 mm rigid PVC pipe of 1.6-1.8 mm thickness

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in

approved manner as directed

Supply and laying of 32 mm rigid PVC pipe of 1.6-1.8 mm thickness

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in

approved manner as directed

Supply and laying of 40 mm rigid PVC pipe of 1.6-1.8 mm thickness

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground /

road surface for enclosing cable

(A)50 mm outer dia

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground /

road surface for enclosing cable

(B)63 mm outer dia

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground /

road surface for enclosing cable

(C)90 mm outer dia

Supply, Installation, Testing and Commissioning of Providing & erecting Approved make Ceiling Fan with double ball bearing ISI

72 mark with condenser A.C.230V 50c/s. 1200 mm. sweep complete, canopy erected on existing hook or clamp with earthing Ea. ₹ 1,581.00 8.00 ₹

Providing & erecting Approved make Ceiling Fan with double ball bearing with Condenser 230 volt A.C.50 Hz. 900 mm sweep

73 complete having 3 Aluminium blades, canopy erected complete. [ Make shall be approved by Engineer in Charge] Ea. ₹ 1,963.00 0.00 ₹

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete

with necessary 24/ O.20, 3 core flexible wire with earthing.

Supplying & erecting approved make 230 V , 50 Hz Operating Voltage low noise decorative Roof Mounting Exhaust fan having

75 square frame and Slitted guard with mounting accessories, necessary pipings and fittings. Ea ₹ 4,238.00 0.00 ₹

(A) 300x300x200mm with 1250 RPM

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise

76 operation suitable for medium duty having following dia size and maximum speed in RPM Ea ₹ 3,306.00 2.00 ₹

[D] 450 mm dia 900 RPM cat-2

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 3000 K to 6500K - as per selection,

77 Luminaire efficacy> 85-90 lumens/watt ,LED efficiency-85-90 lumens/watt Ea ₹ 6,960.00 11.00 ₹

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux make LED used for luminaire. ( fitting required LM-79 & LM-

80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.

Hanging Profile Light 50x75 with integral driver - iV. 40-45 Watts, Surge - 2KV,IP-20, 8 feet long

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 3000 K to 6500K - as per selection,

78 Luminaire efficacy> 85-90 lumens/watt ,LED efficiency-85-90 lumens/watt Ea ₹ 164.00 2.00 ₹

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux make LED used for luminaire. ( fitting required LM-79 & LM-

80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.

(A) Tube Light with integral driver - (i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

79 LED driver efficiency > 85 % Ea ₹ 751.00 27.00 ₹

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

Circular shaped Surface Mount Downlight with provision for spring loaded mounting clips complete.IP20 -

(iv) 22-24 watts, Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

80 LED driver efficiency > 85 % Ea ₹ 584.00 3.00 ₹

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

Circular shaped Surface Mount Downlight with provision for spring loaded mounting clips complete.IP20 -

(C) 16-20 watts, Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

81 LED driver efficiency > 85 % Ea ₹ 1,777.00 0.00 ₹

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

82 LED driver efficiency > 85 % Ea ₹ 218.00 11.00 ₹

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20

(D) LED Strip Light

(ii) Minimum 7.2W -240 LED per meter,(2 wire, IP-65) with non integral suitable Driver complete

Supplying and erecting LED Wall Up-Down Light, NWL-120D, 19-21W, LED, 3000k, IP

Body in rectangular shape made of Extruded aluminium and finished with Pure Polyester powder coating in Grey Colour.

Protection screen in clear tempered glass with high impact resistance. Precise structure and multi-protection silicon gasket

ensures ingress protection- IP

Height - 260mm, Length - 120mm, Width - 120mm, Weight - 1.5Kg.

LED source is of high efficacy COB. Electronic Driver which offers Protection against Short Circuit, Over- Voltage & Over-

Current, CRI > 70, voltage input 240V. Estimated Lifetime-L70 @ 50,000hours minimum. LM80 report from LED Manufacturer

should be submitted. BIS Certificate with manufacturer name same as brand proposed should be submitted.

Sample Should be submitted for concerned engineer incharge for approval of light fixture.

Supply,installation, testing and commisioning of IP-65 7W LED Spike light with die cast aluminum 300 mm long spike, powder

84 coated housing, reflector, toughened glass cover with LED lamp and driver. Ea ₹ 805.00 0.00 ₹

Supply,installation, testing and commisioning of (G) Step Light having Aluminium die cast and ABS Plastic material.

85 (i) 5 watts, Direct/Indirect luminaire Ea ₹ 568.00 0.00 ₹

Supply,installation, testing and commisioning of CIRCULAR GROUND BURIED LIGHT IP-67 30W, 1950Lumen, Body in circular

shape 260mm dia and 179mm height made of high pressure die cast aluminium with powder coating. Top cover in Stainless

steel. Silicon Gasket between frames ensures the Ingress Protection wtith seperate housing for wiring connection

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 &

87 LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may Ea ₹ 4,772.00 0.00 ₹

select any wattage capacity between the ranges shown.)

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum canopy fixed with opal

polycarbonate, pipe arrangement for vertical mounting driver and accessories wired upto terminal block.IP

(ii)32-40W Cat-iii

Supply of approved make FRP Pole having following specifications: FRP Light Pole made by CNC filament winding machine

using thermoset resin polyester/epoxy resin system) having minimum 62% glass content. The pole should be in one piece and

tapered round in shape, having smooth finish and should be totally free from corrosion as well as non conductive & shock proof

Pole should be provided with FRP Anchor Base and it should be heavy duty, or MS Material duly painted with Epoxy paint. Pole

should be flame retardant as per IS 6746. Resin used shall be UV resistance and pigmented. A highly weather resistant

polyurethane coating shall be applied to the pole after applying suitable primer system that ensures proper adhesion of the

paint. Minimum coating thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more than 10% of the length

88 of pole for the given load“ Pole should be generally made as per the dimensional data, performance criteria and some Ea. ₹ 9,696.00 0.00 ₹

interchangeability features of poles as per standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable

termination box with necessary accessories . The size of pole and type of installation with foundation as per manufacturer

details and site requirement are as below .

[D] Overall length of 4 Mtr. Average Thickness: 7mm.

Top/ Bottom OD Dia A/F 89/145 mm ± 2mm approx. Approx. Weight of Pole 19 kg approx. (Without Base)

Anchor Base (Size 250X250 & 12mm th.)

4.0 Mt Pole Foundation : Supply all required material like sand, Aggreagate & Steel, J-Bolt nut-washer etc material of approved

quality and Do civil foundation work all require for the Pole Foundation.

450 x 450 x 1000mm deep M-20 / 1:2:4 cement concrete foundation & 100mm thick PCC at bottom including excavation & Back-

Steel cage Approx 6 KG as per details

4 Nos J-Bolt - 600mm long 10-12mm thick with Double Bolt-Spring Washer,

2 Nos 32mm dia PVC-DWC Pipe 1000mm long each

with necessary curing and finishing in approved & Attached Drawings

Supplying and erecting LED Flood light fittings with High power White LEDs wattage of 1Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved

or embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,

Uniformity ratio >0.45, Luminaire efficacy> 85-90 lumens/watt . LED driver efficiency > 85 %.CREE / OSRAM / PHILIPS

90 Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( fittings required LM-79 & LM-80 certificates) Ea ₹ 7,756.00 0.00 ₹

(B) Flood Light (IP-65), Surge -4KV,Light must have 440VAC line supply protection. It should withstand 48 hours for 440VAC

(v)above 120 to 160 watts

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out approx. 2mm thick box complete

with bakelite connector strip 4way & hinged doors having locking arrangements with mounting clamp with nuts, bolts &

washers suitable for erection on pole with cable clamps& earth bolt of following size of box.: (b) 250mm x 200mm x 100mm

Supplying & erecting approved make street light box comprising CNC Processed robust housing made from single sheet multi

folded with high grade powder coating ( RAL-7032 Structure finish as Standard) of IP-55 degree of Protection Gasket(PU

Gasketing) of following size of Box.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications.

93 (c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer Ea. ₹ 8,551.00 2.00 ₹

System(like Automation, SCADA) i.e independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel

board, Motors etc. using proper clamp.

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered

97 with textured / metallic front plate , modules erected with necessary connection. Ea. ₹ 159.00 15.00 ₹

(8) Modem Jack for Computer Open RJ-45 - cat-III

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered

98 with textured / metallic front plate , modules erected with necessary connection. Ea. ₹ 159.00 6.00 ₹

(3) Two Pin/RJ-11 Telephone Socket

Supplying, erecting, commissioning and testing analog EPABX CMOS microprocessor based system having common features

With remote programming & remote dialing having following other common features. Auto Call Disconnector- (Incoming - Local-

STD) with programmable timing- External Call forward with DOSA- Walk in Class of service & trunk reservation- Boss ring &

call back on No Reply last caller recall CLI- Hot Line with Delay & with No.- Unsupervised Conference- Serial DISA ( DISA with

option to dial another No. if Extn. is No Reply)- Programming Flexibility of all features related to timer( 41 Timer)-10

Different group of out going call restriction like 95, 97, 98 etc.Having following capacity.

(C) 4 incoming junction line & 12 extensions.

Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard approved with krone

(b) Suitable for 20 pair

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction : [C] CAT -

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare

copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage

overall sheathed with black PVC insulation.

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered

103 with textured / metallic front plate , modules erected with necessary connection. for (4) TV Co-axial Socket outlet Ea. ₹ 159.00 4.00 ₹

Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size complete

erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following type of erection.2)

104 For erecting concealed in RCC / Brick wall/slab or Open along with continuous fish wire to draw mains, laid in approved Mtr. ₹ 33.00 350.00 ₹

manner with plastering by cement mortar & finishing the surface to match the wall/ceiling.

Supply and laying of 25 mm rigid PVC pipe of 1.6-1.8 mm thickness (Same As Item E-45)

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction : [C] CAT -

Supply, Installation, Testing and Commissioning of 5 Megapixel IP Dome Camera, HD1080p,1/2.8" CMOS, 24 pcs LEDs, 20m IR,

Indoor IR Eyeball, ICR, 0.1 Lux/F1.2, 12 VDC, Smart IR, DNR, DWDR, 4.0mm lens

Supply, Installation, Testing & Commissioning of 2 Megapixel IP Camera, HD1080p,1/2.8" CMOS, 24 pcs LEDs, 20m IR,

Outdoor IR Bullet, ICR, 0.1 Lux/F1.2, 12 VDC, Smart IR, DNR, DWDR, IP66, 4.0mm lens

Supply, Installation, Testing and Commissioning of 16-Channel Network Video Recorder recording with 10TB HDD with all

108 require installation and integration with all camera system, 16 HD input, 16-ch video, 4 SATA interface, 1920×1080P With HDD nos ₹ 53,475.00 0.00 ₹

with all require software

Installation, Testing and Commissioning of 50" Full HD LED 4K Smart TV as monitor with Power Cord complete as required &

necessary video cards complete as required (if required).

Supply, Installation, Testing and Commissioning of 120W Power Supply for Camera for Outdoor application with Metal

case, Short Ckt Protection, stable power supply output as per Camera Compitible

Supply, Installation, Testing & Commissioning of 36U (1000W X 100D)MM Wall mount closed rack with front glass door, fan tray

111 on top, perforated rear doors, keyboard tray with shelf. Casters & 2 nos vertical power strip with std, as per technical nos ₹ 54,050.00 0.00 ₹

specification etc. as required. Approved Make : Dlink / Uniteco/ Alpine / Valrack

Supply, Installation, Testing & Commissioning of unloaded UTP CAT6A Gigabit Modular Patch Panel for 24 ports in 1U form

factor as per the tender specifications, with universal A/B labeling and 110 connector terminations on rear of panel allowing for

quick and easy installation of 23 AWG cable.- as per technical specification etc. Approved Make : Commscope / Uniteco/ Panduit

(For Data Networking)

Supply, Installation, Testing & Commissioning of unloaded UTP CAT6 Gigabit Modular Patch Panel for 24 ports in 1U form factor

as per the tender specifications, with universal A/B labeling and 110 connector terminations on rear of panel allowing for quick

113 and easy installation of 23 AWG cable.-Data includes Data, Voice, CCTV, Wi-Fi as per technical specification etc. as required. nos ₹ 54,050.00 3.00 ₹

Approved Make : Commscope / Uniteco/ Panduit (For CCTV & Access Control)

Bio metric Access Control with face detection, Card Reader, Thumb Reader and having a memory storage of 45 days for

115 Supplying & erecting, of HDMI cable - 15 Mtr No ₹ 3,740.00 8.00 ₹

Supply, Installation, Testing & Commissioning of 75" LED Sceen of 4K UHD Resolution with Followig spects.

116 HDR Support, Smart TV WebOS lateform, ThinQ AI with voice assistant support, 3-HDMI, 2-3 USB, Ethernet, Wi-fi, Stereo nos ₹ 114,430.00 2.00 ₹

Speaker, Dolby Audio Support

Providing and erecting approved make split air-conditioning unit consisting of copper condensing unit with fan motor,

hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower

117 motor with its accessories by means of extra supplied proper insulated copper tubing,drain PVC pipes suitable for ( cost

includes powder coated Stand, Eco Friendly green gas charging, 15A plug top & Remote Control) with necessary core cutting.

(1)For ISEER Range (KWH/KWH)(3.1 to 3.99) Premium Category

118 (a)For 0.8 to 1.0 Ton Capacity Nos. ₹ 38,986.00 0.00 ₹

119 (b) For 1.5 ton capacity Nos. ₹ 51,923.00 0.00 ₹

120 (c) For 1.7 to 2.0 ton capacity Nos. ₹ 58,706.00 6.00 ₹

121 (d) For 2.2 to 2.5 ton capacity Nos. ₹ 68,449.00 ₹

Carry out RCC / Brick masonary Core cutting- up to 100 mm dia./200mm thick Wall/beam/slab with providing PVC pipe of

mm thick inside and necessary finishing on both ends of wall.

Supplying and installing MS angle , powder coated / Painted standard type of wall/floor stand mount for outdoor unit of split AC

of following capacity, erected with necessary hardware materials as directed.

124 (A) 25mm x 25mm x 3mm thick M.S angle suitable for upto 2 TR. Capacity of ac machine Nos. ₹ 1,305.00 6.00 ₹

125 B) 35mm x 35mm x 5mm thick M.S angle suitable for above 2 TR to 4 TR Capacity of ac machine Nos. ₹ 1,496.00 0.00 ₹

Supplying and erecting insulated pair of soft copper tubing including power and control cable,necessary PVC drain pipes for

Split AC machine up to 4 TR capacity.

Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick nitrile rubber insulation.

128 a) 25 mm Diameter Pipe. Rmt. ₹ 87.00 60.00 ₹

129 b) 40 mm Diameter Pipe Rmt. ₹ 108.00 60.00 ₹

Providing & erecting open well type horizontal mono block pump set with stainless steel body having following specification,

(C) 1 H.P. single phase open well motor pump set suitable for 185 LPM discharge @ 25 mtr. head, suitable for 32 mm dia.

Delivery pipe with control panel.

Providing & erecting open well type horizontal mono block pump set with stainless steel body having following specification,

[D] For 5 HP 3 phase open well horizontal mono block pump set suitable for 1350 LPM to 310 LPM @ 10 to 42 Mtr head

suitable for 50/65 mm dia delivery pipe

Supplying & erecting ABC powder type 'Ceasefire' type Fire extinguisher as per IS 13849 or 1 Kg capacity with necessary

clamp for erection on wall

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from 50 x

133 6 mm M.S. Flat with nut & bolts grouted in wall complete. Ea. ₹ 8,586.00 2.00 ₹

[B] For 5.5 / 6.5 KG Capacity

providing and erecting Fully Automatic Emergency Light working on 220/250 Volts 50 C/s. AC supply complete with

BATTERY of 6 volts, 18 watts Lamps Magnetic relay & Battery charging circuit, and extra output socket, to provide sufficient

134 light continuously for about 4 hours including lamps Emergency Light immediately comes to on by providing bright light when Ea. ₹ 2,216.00 2.00 ₹

main electric supply fails suddenly. And it is all automatic, controlled by a magnetic relay. It is portable too, can be placed at any

convenient point. (a) tube emergency light 2feet,20watt ,10AH

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient temp

of 45˚ C. The outlet temp. of the water should drop by 15˚C within a hour, The water cooler should be comprising of hermetically

135 sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating, coil, thermostats, relay etc.complete Ea. ₹ 55,340.00 0.00 ₹

with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.

Supplying & erecting reverse osmosis (RO) water purification system with M.S. powder coated pedestal frame, prefilter

housing carbon filter suitable buster DC pump, auto low & high pressure switches with following size of LPH capacity & erected

as directed with one year comprehensive maintenance guarantee

136 [D] 100 LPH with 1 phase / 3 phase Raw water pump of 500LPH @ 2.5kg/cm2 - (1N0 - KBL, Groundfoss, xylem), Dual media Ea. ₹ 77,120.00 0.00 ₹

filter 10"x54" - (1 No), Micron cartridge filter 20" x 2.5" ( 1No), High pressure pump 500LPH @ 10kg/cm2 - (1No - KBL,

Groundfoss, xylem), RO Membrane housing with RO membrane of 40*40 - (1No), RO pressure tube 4" x 1E - ( 1No), 0 - 1200LPH

Rotameter -(2 Nos), with Recovery Rate 50%.

Supplying & erecting dual channel amplifier ,power handling capacity of 180 watt ,four micro phone inputs with independent

level control ,built in FM tuner,with preset memories,USB drive & SD card for MP3 playback ,100v /telephone input with

priority and VOX,frequency response-80 Hz to 18k Hz Philips / /distortion less than 1% @ rated power up to 50 units

[[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Ceiling loudspeaker, 24W, 8" Excellent speech and music reproduction

High sound pressure level

Ideal for high-ceiling applications

Flush mounted in ceilings

138 Simple power setting Ea. ₹ 4,964.00 8.00 ₹

Unobtrusive white metal grille

Complies with international installation and safety regulations

BS 5839-8 and EN 60849 compliant

Approved by Competent Authority i.e. not Below the rank of Executive Engineer

Supplying and erecting wall mount speaker with rated power of 30 watt/power tapping 30/15/7.5 watt available,opening

139 angle 180 degree H * 77 degree V ,sound pressure level 88 dB ,frequency response of 70Hz to 20KHz [[Approved by Competent Ea. ₹ 2,544.00 4.00 ₹

Authority i.e. not Below the rank of Executive Engineer ]

140 Supplying & erecting, of 2Cx1.0 Sq. mm Cu Flexible Speaker cable MTR ₹ 85.00 260.00 ₹

Description of Work Unit Qty Rate Amount

WATER SUPPLY PLUMBING & SANITARY FITTING B C D=B x C

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low

1 densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and Rmt 25.00 ₹ 125.22 ₹

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low

2 densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and Rmt 25.00 ₹ 147.82 ₹

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low

3 densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and Rmt 50.00 ₹ 190.12 ₹

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following outside Dia. Low

4 densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) Rmt 50.00 ₹ 277.46 ₹

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low

5 densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and Rmt 50.00 ₹ 335.69 ₹

floor.(G)110 mm

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia.

7 Providing and fixing screw down bib taps of following size.(C) Gun metal screw down bib tap. (i) 15mm dia. Each 2.00 ₹ 157.29 ₹

8 Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 15mm dia. Each 2.00 ₹ 184.98 ₹

9 Providing and fixing Gun metal check or non-return fullway wheel valve.(B) 20mm dia. Each 2.00 ₹ 201.80 ₹

10 Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. Each 2.00 ₹ 416.47 ₹

11 Providing and fixing Gun metal check or non-return fullway wheel valve.(D) 32mm dia. Each 2.00 ₹ 311.61 ₹

12 Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia. Each 2.00 ₹ 656.86 ₹

13 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (i) 25mm dia. Each 2.00 ₹ 131.57 ₹

14 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (ii) 50mm dia. Each 2.00 ₹ 187.96 ₹

15 Providing and fixing ball cock of approved. quality as directed.(B) Abonite (i) 25mm dia. Each 2.00 ₹ 101.89 ₹

16 Providing and fixing ball cock of approved. quality as directed.(B) Abonite (ii) 50mm dia. Each 2.00 ₹ 136.52 ₹

17 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg. Each 2.00 ₹ 948.68 ₹

18 Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. length. Each 5.00 ₹ 100.90 ₹

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation

19 (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and Rmt 30.00 ₹ 168.67 ₹

floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation

20 (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and Rmt 50.00 ₹ 206.73 ₹

floor etc. complete. [B] 20 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation

21 (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and Rmt 50.00 ₹ 251.31 ₹

floor etc. complete. [C] 25 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation

22 (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and Rmt 50.00 ₹ 334.89 ₹

floor etc. complete. [D] 32mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation

23 (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and Rmt 50.00 ₹ 443.29 ₹

floor etc. complete. [E] 40mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation

24 (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and Rmt 50.00 ₹ 654.04 ₹

floor etc. complete. [F] 50mm.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including

all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching,

refilling & testing of joints complete. External -Underground - piping Works :- 65mm Dia.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including

all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching,

refilling & testing of joints complete. External -Underground - piping Works :- 80mm Dia.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including

all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching,

refilling & testing of joints complete. External -Underground - piping Works :-100mm Dia.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including

all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching,

refilling & testing of joints complete. External -Underground - piping Works :-150mm Dia.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts 100mm dia. Class.II

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts 150mm dia. Class.II

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size

160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size

110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Providing &Laying & fixing PVC Floor Trap OR multi floor trap of 110 x 110mm dia diameter, with necessary distance piece of

35 110mm dia pipe and 150x150mm Chillay /Camry/ S.S. Three Pease grating, making necessary SLAB /WALLholes and cutting each 10.00 ₹ 608.11 ₹

walls, etc complete. (Supreme/ Astral Makes)

Excavation for pipes upto1.50 MT depth including sorting out and stacking of useful materials and disposing the excavated stuff

up to 50 mt lead ( A ) loose or Soft Soil

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x

300mm size (inside) with standard weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R type

Providing and laying in trench Foamcore/ De-rex-HDPE/ ECO-drain PVC pipe as per IS-15328 class SN-4 pipes to the specified

38 invert level and slope and full leak proof joining with rubber ring click ring jointing etc., complete with testing.(Supreme/ Astral Rmt 25.00 ₹ 1,100.00 ₹

Makes) Size:- 160mm

Providing and laying in trench Foamcore/ De-rex-HDPE/ ECO-drain PVC pipe as per IS-15328 class SN-4 pipes to the specified

39 invert level and slope and full leak proof joining with rubber ring click ring jointing etc., complete with testing.(Supreme/ Astral Rmt 15.00 ₹ 1,650.00 ₹

Makes) Size:- 200mm

Providing and laying in trench Foamcore/ De-rex-HDPE/ ECO-drain PVC pipe as per IS-15328 class SN-4 pipes to the specified

40 invert level and slope and full leak proof joining with rubber ring click ring jointing etc., complete with testing.(Supreme/ Astral Rmt 5.00 ₹ 2,300.00 ₹

Makes) Size:- 250mm

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the following

41 internal diameter with collars and butt ends prepared for collar joints Rmt 25.00 ₹ 254.64 ₹

including testing of joints complete.(B) 150mm

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the following

42 internal diameter with collars and butt ends prepared for collar joints Rmt 1.00 ₹ 356.28 ₹

including testing of joints complete.(C) 250mm

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the following

43 internal diameter with collars and butt ends prepared for collar joints Rmt 1.00 ₹ 671.31 ₹

including testing of joints complete.(D) 300mm

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks having croshing strength

not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover

with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

44 coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 Each 2.00 ₹ 7,109.35 ₹

finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(iii) Inside dimensions 600mm x

mm and 450mm deep for pipe lines with three or more inlets. .

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size)

foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with

Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement

concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing

45 and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of Each 2.00 ₹ 10,933.41 ₹

cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick

msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand)

(1) A type depth 0.90 Metre for 150mm diameter sewer.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size)

foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with

Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement

concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing

46 and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of Each 1.00 ₹ 19,158.05 ₹

cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick

msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand)

(2) B type depth 1.50 Metre for 150mm diameter sewer.

Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and painting with two coats of Anti-corrosive paint etc.

Supplying and fixing C.I. cover 300mm x 300mm without frame for Gulley trap (Standard pattern) te weight of cover to be not

less 4.53 Kg.) .

Providing & fixing of the FRP recessed type cover with frame size 600 x 600mm size total weight of cover and frame to be

49 withstand up to 25 ton. with including Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) 25 ton Cap. Recessed type cover( Each 5.00 ₹ 21,000.00 ₹

Cover-600 x 600mm ) ( Frame:- 812 x 812mm)

PART-A:- WATER SUPPLY PLUMBING & SANITARY FITTING:- Providing and fixing water closet squatting Pan (Indian type

W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste

50 and trap all complete work) (A) Each 0.00 ₹ 3,000.00 ₹

Vitreous China.(I) Long pattern = White colour (

Supplying Installing and fixing wash down wall mounting EWC-P of approved shade, conforming to Pattern 2 of IS: 2556 (Part -

II), with SWR Selfit Soil PVC pipe and plug bend as per specifications; glazed vitreous / Cloured European Water Closet with

grouting the CI chair in side the floor/wall, rubber gaskets, connecting PVC 110mm dia soil pipe with PVC coupling, nuts,

51 mounting cistern on WC., and solid verity heavy duty plastic seat cover as per IS-2548, of approved make; cutting and making jari Each 2.00 ₹ 15,000.00 ₹

work etc. complete. EWC-P : WALL MOUNT EWC WITH CONCEALED FLUSH TANK/ FLUSH PLATE/ SEAT COVER ETC.

EWC:_ Code Jaquar-FLS-WHT-5953USFM) ( Tank:- Single Pease concealed tank-Chrome Plate-JCP-CHR-152415, ( Jaquar,

Kohler, Cera or Eq. )

Supplying Installing and fixing White glazed vitreous Wash Basin Over -Counter, size 550x460 mm dia., with supporting M.S. or

C.I. Brackets, 1 no, 32 mm CP Bottle trap with extension piece to wall flange with rubber adopter for waste connection and waste

52 coupling.; with rack bolt fittings. Over Counter Type Basin , Jaquar Code- FLS-WHT-5603 , with including Jaquar - Cp-waste Each 2.00 ₹ 12,500.00 ₹

coupling, bottle trap CP Allied-Chrome Plate- ( Jaquar, Kohler, Cera or Eq. )

Supplying Installing and fixing central hole basin wall mounted concealed mixer with pillar cock,flush plate etc basin wall

53 mounted mixer with required pipes connection etc complete.Wsh Basin Mixer - Wall mounted type- Jaquar- FLR-CHR- Each 1.00 ₹ 10,500.00 ₹

5233NK & Plate- ( Jaquar, Kohler, Cera or Eq. )

Supplying Installing & fixing of Single lever Diverter for Concealed Fitting with Built in Non return Valve , for hot and cold water

supply controlling with Diverter Handle with provision for both telephone shower and overhead shower complete with bath

54 spout..Single Lever Divertor Jaquar-FLR-CHR-5065NK-/ Over HEad Shower-OHD-CHR-1639/ Shower Arm-SHA-CHR- Each 1.00 ₹ 17,000.00 ₹

479L450./ Bath Spout- SPJ-CHR-54295,with plate etc. comp. ( Jaquar, Kohler, Cera or Eq. )

Supplying Installing & fixing of 3 in 1 operation Open wall Mixer with over head shower assembly , for hot and cold water supply

controling with open wall mixer complete etc. Jaquar-FLR-5273UPR, Wall Mixer with Provision For Overhead

55 Shower with 115mm Long Bend Pipe, On Upper Side, Connecting Legs & Wall Flanges etc. comp. ( Jaquar, Kohler, Cera Each 1.00 ₹ 12,500.00 ₹

Supplying Installing & fixing in position 15 mm C.P. brass bib cocks of best quality (as approved by the Engineer-in-Charge).FLR-

2 Way Bib Cock With Wall Flange etc. comp. ( Jaquar, Kohler, Cera or Eq. )

Supplying Installing & fixing of Hand Shower (Health Faucet), with 8mm Dia,1Rmt Long pvc Tube and Wall Hook accessories to

complete the item. Jaquar- ALD-579 Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish

and Wall Hook with N.R.V (Back Flow Preventer)

etc. comp. ( Jaquar, Kohler, Cera or Eq. )

Supplying Installing & fixing 15mm C.P. brass angle valve with C.P. copper connecting pipe 450 mm long and nuts, washer and

58 brass flange complete, including cutting and making good the wall where required. Jaquar-FLR-5053N Angular Stop Cock Each 10.00 ₹ 1,550.00 ₹

With Wall Flange ( Jaquar, Kohler, Cera or Eq. )

Supplying Installing & fixing of concealed stop cock with wall flange and complete., for the following sizes. 15mm Jaquar-CON-

069FTK Exposed Part Kit of Concealed Stop

Cock with Operating Lever, Collor Bush & Adjustable Wall Flange (Compatible with ALD-069FT) ( Jaquar, Kohler, Cera

Supplying Installing & fixing of concealed stop cock with wall flange and complete., for the following sizes. 25mm Jaquar-CON-

60 1081KN Flush Cock with Wall Flange 25mm Each 2.00 ₹ 2,550.00 ₹

with Plain Knob type ( Jaquar, Kohler, Cera or Eq. )

Supplying Installing & fixing white vitreous china flat back urinal of size 590x375x390mm as per IS-2556 (Part-2 ) with C.I.

hangers and 15mm dia. C.P. spreader,15MM cCP angular Stop Cock ,Flexible pipe Connecion, 32mm dia CP bottle trap and pipe to

61 wall with C.P. flange complete including cutting and making good the walls and floors wherever required. Jaquar-URS-WHT- Each 2.00 ₹ 15,500.00 ₹

13255 Urinal Without Sensor With Fixing Accessories,

Size: 480x300x740 mm ( Jaquar, Kohler, Cera or Eq. )

Supplying Installing & fixing of concealed type urinal sensor with concealed body, divertor, cock with wall flange and complete.,

for the following sizes. SNR-STL-51087 Sensor Concealed Type Flushing Valve for Urinal Complete Set with Installation

Box with Control Cock (Battery Operated) ( Jaquar, Kohler, Cera or Eq. )

Supplying Installing & fixing of Flush Valve Auto operation cock with wall Flange 32mm with lever knob complete in all respects

including cutting and making good the walls etc. FLV-1085N

63 Metropole Flush Valve Dual Flow 32mm Size (Concealed Body) with Exposed Shut Off Provision & Round Flange Each 2.00 ₹ 4,500.00 ₹

(3.0/6.0 Lts. Per Flushing) ( Jaquar, Kohler, Cera or Eq. )

Supplying Installing & fixing of Pressmatic concealed flush Valve Auto operation cock with wall Flange 15mm with lever knob

complete in all respects including cutting and making good the walls etc. for Urinal area Flsuh :- PRS-073

Auto closing Concealed Urinal Flush Valve With Wall Flange ( Jaquar, Kohler, Cera or Eq. )

Supplying Installing & fixing of Pressmatic open type anguler cock concealed flush Valve Auto operation cock with wall Flange

15mm with lever knob complete in all respects including cutting and making good the walls etc. for Urinal area Flsuh :- PRS-

Urinal Valve Auto Closing System with Built-in Control Cock & Wall Flange ( Jaquar, Kohler, Cera or Eq. )

Supplying Installing & fixing of Pressmatic open type Bib Tap wall Monted type Auto operation cock with wall Flange 15mm with

lever knob complete in all respects including cutting and making good the walls etc. for Press Matic Bib cock- Wall Mounted :-

PRS-043 Bib Cock Auto Closing System with

Built-in Control Cock With Wall Flange ( Jaquar, Kohler, Cera or Eq. )

Supplying Installing & fixing of Pressmatic open type Bib Tap floor Monted type Auto operation cock with wall Flange 15mm

67 with lever knob complete in all respects including cutting and making good the walls etc. for Press Matic Bib cock- floor Each 1.00 ₹ 2,650.00 ₹

Mounted :- PRS-031 Pillar Cock Auto Closing System ( Jaquar, Kohler, Cera or Eq. )

Supplying Installing & fixing of manual operation type Bib Tap wall Monted type cock with wall Flange 15mm with lever knob

complete in all respects including cutting and making good the walls etc. Bib cock :- CON-037KN Bib Cock Also available

CON-047KN Bib Cock with Wall Flange ( Jaquar, Kohler, Cera or Eq. )

Supplying Installing & fixing stainless steel sink, R.S. or C.I. Painted brackets painted, 40mm dia. C.P. waste, C.P. brass chain and

rubber plug, strainer with necessary C.P. brass unions complete including painting the fittings and cutting and making good the

69 walls wherever required, with CP sink cock with raised "J" shaped swinging spout. NIRALI - GRACE - PLAIN - 510 X 432 MM Each 1.00 ₹ 12,500.00 ₹

(ONLY BOWL) SINK COCK WALL MOUNTED WITH J-SHAP SWIING OPERATION - ( Nirali-Jaquar, Kohler, Cera or Eq. )

Suppying, installing, testing and commissioing of centrifugal end suction / monoblock pumps with c.i. casing, Bronze impeller, SS

Shaft and driven by 415 V AC, 3 phase, 50HZ., motor running at 2900 rpm speed and shall be supplied with all accessories viz.,

base plate, coupling, motor, starter panel, Dry run protection, auto level sensors, control panel, float swtich , cabling up to panel,

earthing,suction, delevery & header pipes & valves etc., complete. (Domestic water pumps : To pump UG tank to OHT Feed Water

Tank) ( Grundfos, ITT Lowara, or Eq.Make) Capacity : 2 mtr3/hr.2 Nos. main Pumps ( 1 Working + 1 Stand by Set) 25 mtr head.

WATER COOLER ; Supply, installation, testing & commissioning of S.S. storage type water cooler with inbuilt with on line U.V.

fultration along with built all intercnnectio piping, supports and valve and other electrical requirment ,along with inbuilt storage

71 tank with nessesarry accessories, safety valve, air valve, drain arrangement, all insturumentation, base frame, necessary Job 0.00 ₹ 95,000.00 ₹

electrification, etc. complete for Drinking Water supply. ( Voltas, Blu star, Power H2o Make) Capacity : 80 storage capacity.

Complete as directed by site eng. incharg.

Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings and connection

etc. complete on terrace

Supplying, Installation, Testing and commissioning of ABC type 6 Kg Fire Extinguisher Mono Ammonium Phosphate Powder

Stored Pressure Type, Pressure Gauge, Controllable discharge mechanism Class A, Rating 3A & Class B rating 21B as per IS

ISI MARK (ABC Dry Chemical Powder - MAP 50%).

(Make: Ceasefire, Kanex, Saffex or Eq. )

Providing & fixing of CO2 type Fire Extinguisher of capacity 4.5 kg filled with Co2 Gas as per IS 15222 with controll discharge

mechanis, fitted with Hose & Horn applicable on Class B fire rating 21B confirms to IS 15683 bearing ISI mark. Co2 cylinder as

( Make: Ceasefire, Kanex, Saffex or Eq.)

ELECTRICAL MAKE

Sr. No ELECTRICAL WORK Approved Make List

1 Unitized Sub-Station : ABB Voltamp Schneider Essener

2 Transformer : ABB Voltamp Gujarat Tr Essener

3 11KV HT VCB Panel : ABB Schneider Siemens

4 Diesel Generator Catterpillar KBL Cummins Volvo-Penta

5 Bus-Bar Truncking System : Legrand C&S L&T

6 ACB Schneider MG Toubro (U- Siemens

Molded Case Circuit Breaker

7 : Legrand DX3 Schneider MG Toubro (U- Siemens

Miniature Circuit Breakers

8 : Legrand Schneider MG Toubro (U- Siemens

Residual Current Circuit Breaker

9 : Legrand Schneider MG Toubro (U- Siemens

Schneider Larsen &

10 Power/Aux. Contactor : Legrand (Telemechaniq Toubro (U- Siemens

11 ATS / Change over Switch : Legrand Schneider MG : Socomac

12 APFCR : Legrand : Conzerve Secure Elmeasure

13 Capacitor : Legrand L&T ABB

14 SPD : Legrand OBO MERSEN

Control Transformer/Potential Gilbert &

15 Pragati, Kappa Precise

Transformers Maxwell

Current Transformer (Epoxy Gilbert &

16 Pragati, Kappa Precise

Cast Resin) Maxwell

17 Load Manager / Energy Meter : Conzerve Secure Elmeasure

18 Meters(Digital : V,A,PF etc) : Conzerve Secure Elmeasure

19 Connectors : ELMEX Connectwell Connectwell

20 FABRICATION MATERIALS : JINDAL TATA STEEL

LT Panel manufacturer : IEC-

61439 TTA Panel - OEM

authorized Channel Partner,

21 : Legrands Schneider ABB L&T

CPRI or ERDA Approved Panel

vendor – Profile to be submit for

review & Approval

22 Distribution boards : Legrand Schneider Panasonic

23 PVC tape : Polycab Havells

Rigid PVC Conduit : ISI & FIA BGL

24 approved & manufactured from : Precision Vraj NIHIR

virgin material

25 Accessories for conduit : Same make as of pipe with ISI Approval

26 DWC Pipe : Astral Prince Ashirwad

27 M.S. Boxes : Fabricated out of CRCA sheets / Angle / Strip continuously welded

28 Fan box : GI with MS Hook Type Only

Flexible Copper Wires - FRLS

29 : Havell’s Finolex RR cable Polycab

30 LT Cables : Finolex Polycab RR Havell’s

: Norysis (Cube Legrand Schneider

31 Switches & Switch Box Module Wipro (Arista)

Series) (Myris) (Clipsal)

32 UP-Down Light : NERI BEGA iGuzzini Regent

33 Smart Pole : Neri Regent BEGA iGuzzini

34 Light Pole & Bollard : Neri Regent DW Windsor GHM

35 Landscape / External Light Pole : Neri Regent BEGA iGuzzini

36 Façade Light Fixtures : Neri Regent BEGA iGuzzini

37 LED Screen : LG, Barco, Qlite, Christie

38 Ceiling Fans : Usha Crompton Havells Orient

39 Exhaust Fan : Almonard Usha Crompton

40 Call bell : Anchor Ding Dong type

41 Sensors : Sensinova Legrand

42 Metal Clad and Wheather proof Plug-socket:

: Legrand RR PCE BCH Schnieder

Button holder, Angle holder,

43 : Anchor CPL MK Havells

44 Cable Tray OBO Indiana

45 Raceway - GI Floor : Legrand MK (Ega) OBO

Raceway - Wall Mounted PVC

46 : Legrand MK (Ega) Zucuchi

47 Pop-Up Box : Legrand MK

48 EV charger : Panasoninc Legrand GridenPower

49 Anchor Fastener : Hilti 3M

50 Fire Stopper / Mortar : Hilti 3M

51 Fire Stop Sealant / Foam : Hilti 3M

52 Fire Resi Cable Coating : Hilti 3M

Fire Extinguisher - Should be of

53 : Redex Safex Firex Safeline

54 Chemical Type Earthing : LPI Rapid Ashlock JSR

55 Lightening Surge Protector - LA : LPI Rapid JSR

56 UPS - Inverter : Legrand Eaton

57 Cat 6 & Cat6e wire : Avaya Molex Finolex Delton

58 Cat 5 wire : Avaya Molex Finolex Delton

59 Data Networking I/O : Legrand Schneider

60 Data Networking Rack : Legrand

61 Data Networking Switch : Legrand

62 Fire Alarm Panasonic GE-Edward

63 Optical Smoke Detector Panasonic GE-Edward

64 Heat Detector Panasonic GE-Edward

65 Hooter Panasonic GE-Edward

66 Intelligent Fire Alarm Panel Panasonic GE-Edward

67 Active Repeater panel Panasonic GE-Edward

68 Manual call point Panasonic GE-Edward

69 Camera : Sony Samsung Pelco Bosch

70 DVR / NCR : Sony Samsung Pelco Bosch

71 LCD Monitor : Samsung LG

72 Card Reader Control Panel : Honeywell HID Bosch

73 Access Control Software : Honeywell HID Bosch

74 HID / Finger Print reader : Honeywell HID Bosch

75 Electro-Magnetic lock : Honeywell HID Bosch

76 Speaker : JBL Sony Honeywell Bosch

77 Mixing Amplifier : JBL Sony Honeywell Bosch

78 Booster Amplifier : JBL Sony Honeywell Bosch

79 Microphone : JBL Sony Honeywell Bosch

81 EPABX : NORTEL SIEMENS CISCO TADIRAN

82 Stabilizer : Servomak Fuji Hitachi