Loading
Loading…
Loading…
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
1 Oct 2026, 11:00 am3d left
Executive Engineer MID Anantnag
Executive Engineer MID Anantnag
LIS Khiram-Providing and fitting of 6 cusec, 106 M Head pumping unit along with 370 HP motor.
2026_IFC_325888_1
fresh short term e-NIT No. 27 of 2026-27
Open Tender
Machineries/ Mechanical Engg Items
Turn-key
120 days
Khiram
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Yes
Executive engineer, MID anantnag
₹40,000
Yes
24 Sept 2026
24 Sept 2026
1 Oct 2026
24 Sept 2026
1 Oct 2026
24 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Design, Manufacture, Supply, Installation, Testing & Commissioning of Horizontal Centrifugal Pumping unit. The pumping unit shall have the following specifications:-
A. PUMP:-
Discharge = 6.00 Cusec
Dynamic Head = 106 Mtr.
Speed = 1480 RPM
Type of pump = Horizontal Split Casing Centrifugal.
NPSH A at site = 4 Mtrs
Direction of rotation clockwise when viewed from Driver end
Make : M&P, Flowmore, KSB, Sintech, Kirloskar or Equivalent
MATERIAL OF CONSTRUCTION:
Impeller = Bronze grade V of IS : 318/ CF-8M
Wearing Ring = Bronze grade V of IS: 318
Impeller Shaft = Stainless Steel AISI 410
Fasteners = High tensile Steel
Shaft Sleeve = Stainless Steel AISI 410/Bronze
Pump Casing = Close fine grained Cast Iron conforming to IS:210 Grade 20
MOTOR:-
Type = Three phase, Squirrel Cage, Induction motor
Rating = 370 HP
Speed = 1480RPM. synchonus
Operating Voltage = 415+ 10 % Volt
Frequency = 50 + 3% Hz
Class of insulation = F
Type of Duty = Continuous
Type of enclosure = TEFC
Temperature rise = As per class B.
Motor efficiency ≥IE2
Make: KEC/ABB/Siemens/Bhel/Crompton/Marathon/Jyoti/Havells or Equivalent
The motor shall confirm to IS: 12615 with latest amendments.
Base frame =M.S fabricated as per IS 2062 the cost includes the 3rd party inspection charges
The scope of installation shall include fitting of the pumping unit with existing 350*400 mm suction delivery pipes including necessary modification/material required as per site conditions for proper alignment of pumping unit. The pumping unit shall be complete with Mild Steel Base Frame, fabricated as per IS 2062 with requisite number of Foundation Bolts, and Pump-Motor coupling for installation of the assembly. The job includes costs on account of all duties, taxes, freight, transportation, transit insurance, handling, tools and tackles and consumables required for carrying out the said job.
Note: The Pumping unit shall have to be got inspected by the Third Party Inspection Agency namely CEIL/Rites etc and the Certificate of the same shall be provided at the time of the supply of the equipment, for which the scope has been kept in the estimate cost | 1 | job | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.57 MB
BOQ_1101777.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .