PERIODICAL SERVICES, FALSE CEILING, JOINERY IN SOUTH SIDE OF RUNWAY AT AF STATION JODHPUR

Amount

Material & labour for complete removal of existing treatment from walls and applying two coats of white wash complete all as specified and directed by the Engineer-in-Charge.

Material & labour for complete removal of existing treatment from ceiling and applying two coats of white wash complete all as specified and directed by the Engineer-in-Charge.

Material & labour for complete removal of existing treatment from walls and applying two coats of Acrylic distemper white or tinted over and including one coat of primer and one coat of Birla white putty complete all as specified and directed by the Engineer-in-Charge.

Material & labour for complete removal of existing treatment from walls and applying two coats of water based weather proof exterior emulsion paint (APEX ULTIMA of Asian, Weather coat ALL GUARD of Berger, XTRA TOUGH of Shalimar) over and including one coat of alkali resistant primer on brick stone concrete or plastered surface of any description over 10cm girth or width, not otherwise described complete all as specified and directed by the Engineer-in-Charge.

Material & labour for preparation of old painted wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed by the Engineer-in-Charge.

Material & labour for complete removal of existing treatment on steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint (first quality) over and including one coat of red oxide primer complete all as specified and directed by the Engineer-in-Charge.

Material & labour for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed by the Engineer-in-Charge.

Material & labour for re-writing or repainting of existing letters or figures (Block, Roman, Italic or Indian) not exceeding 30 cm high with thick paint complete all as specified and directed by the Engineer-in-Charge.

Material & labour for french polishing on old wooden surfaces of any description, width or girth including cleaning and preparing the wooden surfaces including a coat of wood filler on old works with one or more coats complete all as specified and directed by the Engineer-in-Charge.

Material & labour for preparation of old painted surfaces of brick stone concrete, asbestos cement or plastered surfaces of any description over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint (First quality) of any tint complete all as specified and directed by the Engineer-in-Charge.

Material & labour for preparation of old decorated plastered or unplastered surfaces of walls by brooming down, steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying one coat of white wash all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of old decorated plastered or unplastered surfaces of ceiling by brooming down, steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying one coat of white wash all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of old decorated plastered or unplastered surfaces of walls by brooming down, steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying one coat of Acrylic distemper, white or tinted all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of old decorated plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and distempering walls by applying one coat of Acrylic distemper, white or tinted complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of aluminium paint all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of old decorated plastered or unplastered surfaces of walls, ceiling, chajja, roofs, AC sheets roof by brooming down, steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc, washing, rubbing down and stopping of previously untreated/painted surfaces and applying one coat of cement base paint (first quality), white or tinted, all as specified and as directed by Engineer-in-Charge.

Raking out joints/pointing to squared rubble masonry, coursed or uncoursed built in cement or cement lime mortar complete all as specified and as directed by Engineer-in-Charge.

Material & labour for flush pointing in cement mortar 1:3 to squared rubble stone masonry, coursed or uncoursed complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off complete all as specified and as directed by Engineer-in-Charge.

Material & labour for rendering 15mm thick in cement mortar 1:6 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material & labour for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material & labour for rendering 10mm thick in cement mortar 1:3 on concrete/stone masonry surfaces in ceiling including finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted, over and including a coat of primer with alkali resistant and including a coat of Birla white putty complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint, white or tinted, complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed by the Engineer-in-Charge. Note for item no.1.00 to 26.00 :- Quoted rate shall be deemed to be included for work in buildings/structure of any height for ser No. 01.00 to 26.00.

Supply & fixing Number plate of building made out of 2mm thick fibre sheet of Size 400mm x 150mm of blue colour, and writing of building number with white colour fixed to walls with screws of required size, number plate fixed over and including 15mm thick raised portion of wall of Size 400mm x 150mm made out of 15mm thick plaster in cement mortar 1:4 complete all as directed by the Engineer -in-Charge .

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as specified and as directed by Engr-in-Charge .

Supply & fixing of 2nd class hard wood for plain, solid, straight chowkats and frames, wrought, framed rebated on the solids, rounded or chamfered, put together with glue painted at joints, including necessary fixing arrangement like hold fast complete all as specified and as directed by Engr-in-Charge .

Material & labour for Cutting holes exceeding half brick but not exceeding one brick in stone walls built in cement mortar or in cement lime mortar for inserting holdfasts & making good dismantled portion in cement mortar (1:3) or PCC (1:2:4) Type B-1 as required complete all as specified and as directed by Engr-in-Charge .

Supply & fixing 40 mm thick Flush shutters, solid core construction, with block board core & plywood face panels including making necessary opening of size 150mm x 150mm in shutter and fixing plain glass sheet on the same place complete all as specified and as directed by Engr-in-Charge .

Supply & fixing stainless steel butt hinges medium weight of size 100 mm complete all as specified and as directed by Engr-in-Charge . Make Prayag Cat No. 2265 or equivalent of make given in Appx 'B' as approved by GE.

Supply & fixing stainless steel barrel tower bolts of 200 mm long complete all as specified and as directed by Engr-in-Charge .Make Prayag Cat No. 2333 or equivalent of make given in Appx 'B' as approved by GE.

Supply & fixing stainless steel handles 150mm long complete all as specified and as directed by Engr-in-Charge .Make Prayag Cat No. 5102 or equivalent of make given in Appx 'B' as approved by GE.

Supply & fixing stainless steel sliding door bolt with hasp, staple bolt type and fixing clips of sheet of 300 mm long complete all as specified and as directed by Engr-in-Charge . Make: Prayag Cat No. 2203 or equivalent of make given in Appx 'B' as approved by GE.

Supply & fixing floor door stopper with stainless steel body, 100 mm size complete all as specified and as directed by Engr-in-Charge .Make Prayag Cat No. 5121 or equivalent of make given in Appx 'B' as approved by GE.

Material & labour for 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed by Engr-in-Charge

Supply & fixing in repairs Aluminium (Die cast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg complete all as specified and as directed by Engr-in-Charge .

Supply & fixing in repairs Powder coated aluminium snap grid frame work of size 605 x 605mm in ceiling fixed with screw suspended with 6mm dia GI (upto 1200 mm length) adjustign level fixed to roof slabs by means of ceiling cleates made out of GI flat 40 x 3 mm size 60mm long complete all as specified and as directed by Engr-in-Charge .

Supply & fixing exposed metal frame ceiling with 12 mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600 mm gride (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed by Engr-in-Charge . Make Armstrong or equivalent of make given in Appx 'B' as approved by GE.

Siddharth Constructions

M.A. MUNSHI AND CO.