GENERAL-RENOVATION OF COUNCIL HALL AT PALAKKAD MUNICIPALITY PHASE2-RENOVATION OF COUNCIL HALL AT PALAKKAD MUNICIPALITY PHASE2- General Civil Work

Amount

COUNCIL HALL RENOVATION PHASE2

OD183812/2025-2026 Dismantling table including chowkhats, architrave, holdfasts etc. complete and stacking within50 metres lead

13.116 shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

OD183820/2025-2026 Applying polypropelen floor mat 5mm thickness above the cement sheet with adhesive and snap beeding as per the instruction of site engineer/color:Red ,blue

50.9.1.3 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). using good quality Vengai wood

9.103 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles of approved quality with necessary screws etc . complete

9.165.1 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm

9.9.2.2 Providing and fixing glazed shutters for door, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. Pressed butt hinges bright finished of required size with necessary screws. Kiln seasoned and chemically treated hollock wood30 mm thick

OD188894/2025-2026 Provide and fixing ( excludingwooden chair )1.)90mm thickness 4kg density high quality feautre foam and 2).synthetic leather high quality 3).6mm plywood and bolts .

10.16.2 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes

OD202323/2025-2026 providing and fixing heavy duty fibre cement board 18mm thick for floring as per the instruction of site engineer(cost of frame work paid to be seprately

OD211290/2025-2026 providing and fixing pvc zebra line curtain(curtain blinds) with adjustable rope and aluminium channel with ss bolts color: red , black or any combination color as per complete engineer in charge

OD211291/2025-2026 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)

9.147E.2 Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including

FINISHING WORKS

14.72 Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including

OD201671/2025-2026 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

13.8 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.46.1Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

OD202327/2025-2026 fixing art work in walls with base multi wood in round shape and aluminium sheet 2mm thick and art work in acrylic material with line drawing

NAME BOARD

OD201698/2025-2026 Lettering in stainless steel for name board wok including labour materials and fitting charges etc complete. (Area to be measured including standard spacing between letters)

OD201704/2025-2026 providing and fixing table name board pvc material with lettering for each benches as per standard letters with proper background color .

OD201706/2025-2026 providing and fixing hanging name board acrylic material with lettering as per standard size with proper background color .

OD192264/2025-2026 Providing and fixing Name Board with granite of any colour and shade of required size laid over base of cement mortar 1:4 (1 cement :4 coarse sand ),including all charges etc complete at all levels with letters engraved as per approved matter ( Board of 1mx50cm )

13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

COUNCIL HALL MIKE INSTALLATION

OD201646/2025-2026 Supply, Installation, Testing and Commissioning of SHURE CVG18S-B/C-X GOOSE NECK MIC INCLUDING CVD-8 DESKTOP BASE Chairman Unit microphone with priority switch, talk switch, speaker volume control. with all control.

OD201647/2025-2026 Supply, Installation, Testing and Commissioning of JTS Gooseneck cs-1ch/cs- 1duDelegate unit microphone systems with talk switch, Speaker volume control, Head phone volume control. JTS Gooseneck cs-1ch/cs-1DU

OD201649/2025-2026 Supply, Installation, Testing and Commissioning of JTS CS 1-CUR confrence system control console ,with all sound control unit .

OD201650/2025-2026 Supply, Installation, Testing and Commissioning of JTS CS- expansion kit master and, JTS CS1 EXS EXPANSION KIT SLAVE

OD201651/2025-2026Supply, Installation, Testing and Commissioning of JTS CS- expansion kit master and, JTS CS1 EXS EXPANSION KIT SLAVE

OD201653/2025-2026 Supply, Installation, Testing and Commissioning of SOUND CRAFT U112 DIGITAL MIXER CONSOL

OD201654/2025-2026 Supplying and fixing projector cable and mounting kit

OD201655/2025-2026 Supplying instalation and comissioning of 8 core cable to amplifier sound kit and mixing . 8core cable and connectors

OD201657/2025-2026 supplying installation and comissioning of loop cable for delegates mike to achairman unit for all control unit

OD201658/2025-2026 supplying ,installation, fixing all connecting accesories , XLR, EP pin, three core wire, par connector, speaker bracket .

OD201659/2025-2026 Wiring for circuit/ of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit

OD201662/2025-2026 Supply, installation, testing, and commissioning of 8 CCTV cameras along with all necessary accessories, which includes: a) CP Plus 8-Channelupto 5mp b) CP Plus 4 MP Color Cameras (8 Nos.) c) 8-Port PoE Full Gigabit Switch d) 1000GB Hard Disk Drive e) NETWORK CABLING WITH CABLE PIPE f) 6U Network Rack g) RJ45 Connectors

np constructions (BID ID -2417270)

abdul kasim (BID ID -2417009)