Loading
Loading…
Loading…
Tender Value
₹2.9 Cr
EMD Value
₹2.9 L
Closing Date
14 Sept 2026, 6:00 pm
Executive Engineer’s office, Valsad (R&B) Division,
Construction of Two Workshop and Four Theory Room at Mahila ITI Lilapor, Dist:- Valsad
337640
19 of 2026-27
Open
Civil - All
Works
Valsad
8 documents required · 8 mandatory
₹3,600
Executive Engineer, Valsad (R&B)Division, Valsad
₹2.9 L
21 Aug 2026
21 Aug 2026
21 Aug 2026
14 Sept 2026
21 Aug 2026
Name of work :-
Construction of Two Workshop and Four Theory Room at Mahila ITI Lilapor, Dist:- Valsad
Bill of Quantities
(A) Percentage Rate Tender (Up to INR 50 Cr. )
Memorandum showing items of work to be carried out
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
1 Excavation for foundation upto 1.50 mt depth including Sorting out and 1194.70 Cumt 117.08
stacking of useful materials and disposing the excavated stuff all lead & lift
(A) Loose or soft soil.
2 Excavation for foundation 1.50 mt to 3.00 mt depth including Sorting out and 558.20 Cumt 162.56
stacking of useful materials and disposing the excavated stuff upto 50 mt lead
(B) Dense or hard soil
3 Excavation for foundation 3.00 mt to 5.00 mt depth including Sorting out and 101.40 Cumt 175.97
stacking of useful materials and disposing the excavated stuff upto 50 mt lead
(B) Dense or hard soil
4 Filling in foundation and plinth with sand in layers of 20 cm. Thickness 130.80 Cumt 460.19
including watering ramming and consolidating etc. comp.
5 Filling available excavated Earth (Excluding Rock) in trench plinth side of 723.20 Cumt 130.39
foundation . in layer not excluding 20 cm in depth consolidation each
deposited layer by ramming and watering etc. complete
6 Filling foundation and plinth with murrum or selected soil in layer of 20 cm in 241.80 Cumt 289.06
thickness including ramming watering and consolidating etc. complete
7 Applying general insecticide pest control treatment to floor,cupboards etc 1063.00 Sqmt 59.04
including labour materials etc.complete.using lmidacloprid 30.5 Scas per IS
6313 part -III ( 0.075% concentration by mass ) is recommended 10.5ml
chemical diluted with 5 liter of water application 0.5 liter chemical / Sqm of
surface is recommended as per I.S.
8 Providing and laying controlled cement concrete M.150 and curing complete 246.80 Cumt 3894.06
including the cost of formwork but excluding the cost of reinforcement for
reinforced concrete work in (A) Foundations and plinth pcc
9 Providing and laying controlled cement concrete M.250 and curing complete 91.40 Cumt 4606.61
including the cost of form work but excluding the cost of reinforcement for
reinforced concrete work in (A) Foundations, footings, and Mass concrete.
10 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- 76.10 Cumt 3135.29
Crushed stone aggregates 40 mm nominal size) and curing complete excluding
cost of formwork in (A) Foundation and Plinth
11 Providing and laying controlled cement concrete M-250 and curing complete 26.00 Cumt 7408.35
including the cost of form work but excluding the cost of reinforcement for
reinforced concrete work in Columns, pillars posts and struts Columns up to
12 Providing and laying controlled cement concrete M-200 and curing complete 28.40 Cumt 7403.30
including the cost of form work but excluding the cost of reinforcement for
reinforced concrete work in Columns, pillars posts and struts Ground FLOOR
13 Providing and laying controlled cement concrete M-200 and curing complete 22.70 Cumt 7443.70
including the cost of form work but excluding the cost of reinforcement for
reinforced concrete work in Columns, pillars posts and struts First Floor
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
14 Providing and laying controlled cement concrete M-200 and curing complete 4.90 Cumt 7484.10
including the cost of form work but excluding the cost of reinforcement for
reinforced concrete work in Columns, pillars posts and struts Second Floor
15 Providing and laying controlled cement concrete M-250 and curing complete 55.10 Cumt 5830.73
including the cost of form work but excluding the cost of reinforcement for
reinforced concrete work in Ground & Plinth BEAMS
16 Providing and laying controlled cement concrete M.150 and curing complete 76.60 Cumt 4245.03
including the cost of form work but excluding the cost of reinforcement for
reinforced concrete work in (C) Plinth Slabs
17 Providing and laying controlled cement concrete M.200 and curing complete 56.50 Cumt 6056.97
including the cost of form work but excluding the cost of reinforcement for
reinforced concrete work in (C) Ground floor Beams
18 Providing and laying controlled cement concrete M.200 and curing complete 56.30 Cumt 6097.37
including the cost of form work but excluding the cost of reinforcement for
reinforced concrete work in (C) First floor Beams
19 Providing and laying controlled cement concrete M.200 and curing complete 6.40 Cumt 6137.77
including the cost of form work but excluding the cost of reinforcement for
reinforced concrete work in (C) Second floor Beams
20 Providing and laying controlled cement concrete M-200 and curing etc. 4.80 Cumt 6197.36
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (c) Chhajja for Ground floor
21 Providing and laying controlled cement concrete M-200 and curing etc. 3.00 Cumt 6237.76
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (c) Chhajja for First floor
22 Providing and laying controlled cement concrete M-200 and curing etc. 0.30 Cumt 6277.17
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (c) Chhajja for second floor
23 Providing and laying controlled cement concrete M-200 and curing etc. 2.50 Cumt 6839.72
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (c) Lintel for Ground floor
24 Providing and laying controlled cement concrete M-200 and curing etc. 2.10 Cumt 6880.12
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (c) Lintel for First floor
25 Providing and laying controlled cement concrete M-200 and curing etc. 0.20 Cumt 6919.50
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (c) Lintel for Second floor
26 Providing and laying controlled cement concrete M.200 and curing complete 80.30 Cumt 6502.38
including the cost of formwork but excluding the cost of reinforcement for
reinforced concrete work in (C) Ground floor Slab
27 Providing and laying controlled cement concrete M.200 and curing complete 74.30 Cumt 6542.78
including the cost of formwork but excluding the cost of reinforcement for
reinforced concrete work in (C) First Floor slab
28 Providing and laying controlled cement concrete M.200 and curing complete 5.60 Cumt 6583.18
including the cost of formwork but excluding the cost of reinforcement for
reinforced concrete work in (C) Second Floor slab
29 Providing and laying controlled cement concrete M-200 and curing etc. 5.90 Cumt 7163.93
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (E) Stair case up to floor two
level for Ground Floor to first floor
30 Providing and laying controlled cement concrete M-200 and curing etc. 4.00 Cumt 7203.32
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (E) Stair case up to floor two
level for First Floor to Second floor
31 Providing and laying controlled cement concrete M-200 and curing etc. 2.00 Cumt 8482.99
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in RCC wall for Ground floor
32 Providing and laying controlled cement concrete M-200 and curing etc. 1.00 Cumt 8522.38
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in RCC wall for First floor
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
33 Providing and laying controlled cement concrete M-200 and curing etc. 13.60 Cumt 8562.78
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in RCC wall for Second floor
34 Providing and fixing 90 cm high Stainless steel railing made from anticorrocive 17.00 Sqmt 3698.62
304 grade S S pipe of 50 mm dia (16Gauge) as hand rail with S S 304 grade
Baluster of 38 mm dia (16Gauge) as a vertical support fixed in RCC slab at
0.50m c/c including three horizontal S S pipes of 16 mm dia (16Gauge) at
eqal distance fixed including The Provisions in Nation Building Code
part,Annex:B-6.2 with baluster ,accessories as per detailed drawing as
directed etc. complete.
35 Providing and fixing MS Pipe Railing made from MS pipe of 50 mm dia 588.00 Kg 47.47
(Rmt/wt 4.50kg) as Hand rail with Baluster of 38 mm dia (Rmt/wt 2.99kg) as
a vertical support fixed in RCC slab & wall at 1.0m c/c with baluster and
Priming coat & two coat of oil paint including accessories as per detailed
drawing as directed etc. complete.
36 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, 91207.00 Kg 76.66
binding and placing in position complete up to All floor Level
37 Brick work using common burnt clay building bricks crushing strength not less 106.00 Cumt 4021.02
than 35 kg/sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement :
fine sand) (B) Conventional For below plinth
38 Brick work using common burnt clay building bricks crushing strength not less 141.00 Cumt 4295.99
than 35 Kg/Sq.cm. in super structure above plinth level upto floor two level in
cement mortar 1:6 (1cement : 6 fine sand) (B) Conventional For Ground Floor
39 Brick work using common burnt clay building bricks crushing strength not less 113.70 Cumt 4336.18
than 35 Kg/Sq.cm. in super structure in cement mortar 1:6 (1cement : 6 fine
sand) (B) Conventional For First Floor
40 Brick work using common burnt clay building bricks crushing strength not less 19.10 Cumt 4376.37
than 35 Kg/Sq.cm. in super structure in cement mortar 1:6 (1cement : 6 fine
sand) (B) Conventional For Second Floor
41 Half brick masonry in common brunt clay building bricks having crushing 76.30 Sqmt 653.01
strength not less than 35Kg/Sm. In C.M 1:4( 1cement : 4 coarse sand) in super
structure.(B) Conventional for Ground floor.
42 Half brick masonry in common brunt clay building bricks having crushing 59.20 Sqmt 659.00
strength not less than 35Kg/Sm. In C.M 1:4( 1cement : 4 coarse sand) in super
structure. (B) Conventional for First floor.
43 Half brick masonry in common brunt clay building bricks having crushing 2.90 Sqmt 665.00
strength not less than 35Kg/Sm. In C.M 1:4( 1cement : 4 coarse sand) in super
structure. (B) Conventional for Second floor.
44 Providing 15mm thick cement plaster in single coat on Rough (Similar) side of 1308.60 Sqmt 201.40
single or half birck walls / concrete wall for interior plastering and finished
even and smooth in C M 1:4 (1 cement : 4 coarse sand) with floting coat of
neat cement slurry etc.complete. For Ground floor
45 Providing 15mm thick cement plaster in single coat on Rough (Similar) side of 1090.70 Sqmt 224.80
single or half birck walls / concrete wall for interior plastering and finished
even and smooth in C M 1:4 (1 cement : 4 coarse sand) with floting coat of
neat cement slurry etc.complete. For first floor
46 Providing 15mm thick cement plaster in single coat on Rough (Similar) side of 90.50 Sqmt 248.19
single or half birck walls / concrete wall for interior plastering and finished
even and smooth in C M 1:4 (1 cement : 4 coarse sand) with floting coat of
neat cement slurry etc.complete. For second floor
47 Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling 526.60 Sqmt 189.15
and soffits of stairs and finished even and smooth in : (I) Cement mortar 1:4
(1 cement : 4 sand) etc. complete.For .Ground Floor
48 Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling 523.80 Sqmt 212.54
and soffits of stairs and finished even and smooth in : (I) Cement mortar 1:4
(1 cement : 4 sand) etc. complete.For First Floor
49 Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling 34.30 Sqmt 235.94
and soffits of stairs and finished even and smooth in : (I) Cement mortar 1:4
(1 cement : 4 sand) etc. complete.For second Floor
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
50 20 mm Thick sand faced Gutka cement plaster on walls for all height above 1438.90 Sqmt 300.66
ground level consisting of 12 mm Thick backing coat of c.m. 1:3 (1 cement :
sand) and 8 mm Thick finishing coat of c.m. 1:1 (1 cement : 1 sand) with
1x1cm Groves at juction of structure member etc. complete.all height
51 Providing and fixing 150 mm Wide approved quality chicken wire mesh at 328.00 Sqmt 54.54
junction of brick work and RCC work or two dissimilar surfaces, at all heights
fixed by nails, rowal plugs or tag by cement mortar 1:3 before applying the
plaster, including curing, scaffolding all complete as directed.
52 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 132.80 Rmt 42.17
53 Applying two coats of (white cement based) or (acrylic lappy (putty)) and 3574.50 Sqmt 40.59
two coats of primer of approved brand and manufacture on new wall surface
to give an even shade including thoroughly brushing the surface free from
mortar dropping and other foreign matter and sand papered smooth.
54 Wall painting (Two coats) with plastic emulsion paint of approved brand and 2489.80 Sqmt 80.35
manufacture on undecorated wall surface to give an even shade including
throughly brushing the surface free from mortar droppings and other foreign
matter and sand papered smooth.
55 Wall painting (Two coats) with plastic emulsion paint of approved brand and 1084.70 Sqmt 85.76
manufacture on undecorated ceiling surface to give an even shade including
throughly brushing the surface free from mortar droppings and other foreign
matter and sand papered smooth.
56 Wall Painting (Two coats) with weather proof acraylic emulsion (Apex or 1438.90 Sqmt 114.53
equivalent type) paint of approved brand and manufacture and of required
shade on exterior wall surface to give an even shade over and including
primery coat with Alkaly resistance primer of approved brand after thoroughly
brushing surface to remove all dust and remains of loose powdered material
etc. copm. for all height
57 Providing And filling with good quality sinder(steam coal) as directed by 5.70 Cumt 454.50
engineer in charge in sunks in layers of 30 cm thick,including watering,placing
,ramming well etc as directed, for all floor.
58 Providing 20 mm thick Water proof cement plaster for sunk in single coat on 103.20 Sqmt 300.98
brick / conctrete wall for interor plastering up to floor two level finished even
and smooth (ii) cement mortar 1:3 (1- cement, 3 sand) and mixing
waterproofing materials of approved brand and manufacture in cement
mortar in proportion recommended by the manufacture for All floor.
59 Providing and laying water proofing treatment by conventional method 553.80 Sqmt 947.38
including cleaning the slab surface by wire brush as directed including
provding first layer of C.M. 1:4 of 40 mm thickness mixed with water proofing
compound at rate prescribed by manufacturer, including putting of brick bats
of average thickness 40 mm Well immerssed in water laid uniformly on first
layer of mortar including applying cement slurry @ rate of 0.08 bag/sqm. on
fixed layer of brick bats including maintaining necessary slope, in second layer
40 mm thick C.M 1:4 mixed with water proofing compound as directed,
including finishing smooth with cement slurry as directed complete.
60 Providing and laying controlled cement concrete M-200 for RCC work and 0.20 Cumt 6937.70
curing complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in coping on Ground Floor
61 Providing and laying controlled cement concrete M-200 for RCC work and 0.60 Cumt 6978.08
curing complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in coping on First Floor
62 Providing and laying controlled cement concrete M-200 for RCC work and 1.00 Cumt 7017.48
curing complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in coping on Second Floor
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
63 Providing and fixing window having extruded aluminum Colour anodized 84.30 Sqmt 2211.90
section frame main outer size 95.00 mm x 24.10 mm x 1.17 mm (Weight:-
0.738/Rmt) horizontal Three track and horizontal & Vertical member of size
92.00 mm x 31.75 mm x 1.50 mm (Weight:-1.06/Rmt), with sliding Three
Glass shutters of horizontal member size 40mm x 18mm x 1.29mm ( @ wt.of
0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm with 5 mm
thick transparent bronze colour tinted float glass with powder coated
aluminum fittings & fixtures and Lock Strip, transparent silicon sealant glass
fixing to frame and extruded aluminum Colour anodized section frame With
mm thick transparent bronze colour tinted float glass Fix Louvers. as per
details etc complete for window.W1,
64 Providing and fixing window having extruded aluminum Colour anodized 26.40 Sqmt 1763.46
section frame main outer size 95.00 mm x 24.10 mm x 1.17 mm (Weight:-
0.738/Rmt) horizontal Four track and horizontal & Vertical member of size
92.00 mm x 31.75 mm x 1.50 mm (Weight:-1.06/Rmt), with sliding Four
Glass shutters of horizontal member size 40mm x 18mm x 1.29mm ( @ wt.of
0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm with 5 mm
thick transparent bronze colour tinted float glass with powder coated
aluminum fittings & fixtures and Lock Strip, transparent silicon sealant glass
fixing to frame and extruded aluminum Colour anodized section frame With
mm thick transparent bronze colour tinted float glass Fix Louvers. as per
details etc complete for window.W2
65 Providing & Fixing in position standard extruded approved colour anodised 26.50 Sqmt 1837.19
Aluminum Ventilator with outer frame 65 x 25 mm Stander Box Frame with
mm thick transparent bronze colour tinted float glass Louvers For ventilation
including all required materials, fixtures, fastenning, labours and equipments
as per detailed drawing as directed. For Ventilators V1,V4,V5,
66 Providing and fixing in position collapsible steel shutters with vertical channel 11.30 Sqmt 2402.79
20 x 10x 2 mm braced with flat iron diagonals 20 x 5 mm size with top and
bottom rails of T_rin 40 x 40 x 6 mm with 38 mm dia,steel pulleys complete
with bolts,nuts,locking arrangements,stoppers,handles including applying
priming coat with two coats of enamel paints etc.Complet.
67 Providing and fixing M S angle openable grilled Door having 65 MM. x 65 MM 2.20 Sqmt 4139.99
x 6 MM size M.S. angled welded togather to make a box frame and 20mm dia
M.S. bars to be fixed with it by drilling hole in the angle section and welded at
10 cm C/C approx including anodized iron fixtures & fastenings including
primer coat of approved quality and two coats of oil paint etc., complet as per
detail drawing as directed.
68 Providing and fixing 35 mm thick two flush door shutter, solid core with 5 11.30 Sqmt 3315.83
mm thick transparent bronze colour tinted float glass and teak wood frame
and.Double shutter pivoted with required teakwood batten having 1mm thick
lamination on both side, Durable Grip shall be providing with floor spring
heavy duty and 60cm long stainless steel handle,S.S. Stopper 60 Cm long, S.S.
Aldrop and necessary Locking system of Godrej, polish work ,fixtures &
fastenings etc. directed by engineer in charge.Main Door D1
69 Providing and fixing 35 mm thick two flush door shutter, solid core with 29.50 Sqmt 4354.11
Anodized Aluminium section (jindal door section no 19552-weight not less
than 1.1 kg/mt ) frame size 63.5mm x 35mm and teak wood frame inside the
aluminium section.Double shutter pivoted with required Aluminium U type
batten having 1mm thick lamination on both side, Durable Grip shall be
providing with 15cm long stainless steel handle and necessary Locking system
of Godrej, ,fixtures & fastenings etc. directed by engineer in charge.D2
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
70 Providing and fixing FRP frame size 100 x 50 mm and 28 mm thick FRP depress 31.00 Sqmt 2377.76
panel Single shutter having extra reinforcement on sides & edges in Gel coat
finish.The core of the shutter & frame is to be filed up with injected fire
retradat grade polyurethene foam done in situ along with embeded wooden
pieces for stiffening & also taking hinges & fintures.The whole FRP frame &
shutter is to be waterproof, weatherproof ,termite proof & resistance to mild
acid/alkali.Rates are to be inclusive of S.S hinges with necessary screws &
alluminum fixtures & fastenings & fartener sleeve.Colour and Shade approved
by Engineer-In-Charge. D4,D5
71 Providing and fixing rolling shutters of approved make made of 80 mm wide 10.20 Sqmt 4495.02
M.S. laths inter-locked together through their entire length and jointed
together at the ends by end locks mounted on specially designed pipe shaft
with bracket plates, guide channels and arragements for inside and outside
locking with push-pull operation including the cost of hood cover and spring
etc. complete. (B) Shutters having width 3.5 M. and above
72 Providing and laying machine cut machine polished Granite stone treads& 85.00 Sqmt 1955.36
risers and Copboards in Single piece Max length with 1cm projecting, nozing
rounded moulding in tread laid over 12 mm (avg.) thick bases of cement
mortar 1:6 (1-cement : 6-coarse sand) jointed with grey or colour cement
slurry including rubbing and polishing incl. making Three No.s of grooves of
size 3mm X 3mm along the length of treads etc. complete
73 P & L 60x60 cm. vitrified Tiles (ANTI SKID / MAT) 8 mm thick tile flooring over 475.90 Sqmt 1397.83
20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on
new surface or fixing on existing flooring by adhesive material including
dismentaling of existing flooring and jointed with color cement slurry including
finised with flush pointing & cleaning the surface for antiskit mat finised etc.
complete. Colour and Shade approved by Engineer-In-Charge
74 P & L 60x60 cm. vitrified Tiles (ANTI SKID / MAT) 8 mm thick tile riser of 22.90 Sqmt 1141.45
steps,skirting dedo and pillars laid on 10 mm thick cement mortar 1:3 (1-
cement 3-coarse sand) and jointed with color cement slurry mixed with
pigment to match the shade of slab including finised with flush pointing &
cleaning the surface for antiskit mat finised etc. complete. Colour and Shade
approved by Engineer-In-Charge
75 P & L 60x60 cm Hand Dressed Mirror polished Blue Kota Stone slab 30 mm 301.90 Sqmt 1029.22
thick flooring over 20 mm (average)thick base of cement mortar 1:6 (1-
cement 6-coarse sand) or L.M 1:1.5 (1 Lime putty : 1.5 coarse sand laid over
and jointed with grey cement slurry mixed with pigment to match the shade
of slab including rubbing and polishing etc.complete(30 mm thick)
76 P & L 60x60 cm Hand Dressed Mirror polished Blue Kota Stone slab 25 mm 10.40 Sqmt 1089.67
thick in riser of steps,skirting dedo and pillars laid on 10 mm thick cement
mortar 1:3 (1-cement 3-coarse sand) and jointed with grey cement slurry
mixed with pigment to match the shade of slab including rubbing and
polishing etc.complete
77 P & L 60x60 cm Hand Dressed polished Blue Kota Stone slab 25 mm thick 20.40 Sqmt 965.59
flooring over 20 mm (average)thick base of cement mortar 1:6 (1-cement 6-
coarse sand) or L.M 1:1.5 (1 Lime putty : 1.5 coarse sand laid over and jointed
with grey cement slurry mixed with pigment to match the shade of slab
including rubbing and polishing etc.complete
78 P & L 30x30 cm. Matt Finished Ceramic Tiles 6 mm thick in flooring treads of 57.10 Sqmt 917.25
steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1-cement:3-
coarse sand)finishing with flush pointing in colour cement slurry etc.
complete. Colour and Shade approved by Engineer-In-Charge
79 P & L 30x45 cm. Glazed Tiles 6 mm thick in skirting risers of steps and dedo 184.90 Sqmt 1073.90
on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and jointed with
colour cement slurry
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
80 Providing and laying water proofing treatment with broken chine mosaic 525.30 Sqmt 747.29
flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be
laid over cement mortar 1:3 to plain or slope and to be tempered to bring
mortar creme out upto surface using white cement including rounding off
junctions and extending them upto 15 cm along the wall, clearing with water
and oxalic acid etc. as directed.
81 Providing and fixing pre-cast Rubber Dye inter locking concrete block 60mm 669.70 Sqmt 686.90
thick with grade of concrete M300 pnumatic compressed/Vibrated
mechanically and as per approved design confieming to IS 15658:
including 35 mm Sand layer for levelling and filling the joint with sand in
proper line and level as per guidelines of IRC : SP 63-2018 etc complete.
82 Providing and fixing Mirrar polished 18 mm thick Green Marble stone in 215.10 Sqmt 1387.74
Single piece with full round edge and polished of approved quality in clading
on Cill & Jambs and around the doors/ windows/ ventilation with 12 mm thick
cement motor CM (1:4) and fixing with cement slurry & adhesive including
moulding of exposed edges as directed by engineering in charge etc.
83 Providinfg and fixing Safty grills of required pattern for windows/ Door using 4038.00 Kg 109.08
necessary M.S angle/ M.S pipe, M.S flats and other structural steel at
required spacing including cutting, welding and fabriction etc. including one
coat of primer of approved quality and two coats of oil painting as per detail
drawing etc complete.
84 Providing erecting and fixing double coated (ISI) water tank of required 20000.00 Litre 3.95
capacity each with all necessary fittings and connection etc. complete on
85 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( 180.00 Rmt 195.67
SCH- 40) for cold water including fittings as approved by Engineer In Charge.
Pipe shall be fixed on the wall with the help of MS Z clamp at every two metre
C/C or shall be concelled as directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with adhesive solvent, including
cost of all materials.
86 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( 80.00 Rmt 148.12
SCH- 40) for cold water including fittings as approved by Engineer In Charge.
Pipe shall be fixed on the wall with the help of MS Z clamp at every two metre
C/C or shall be concelled as directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with adhesive solvent, including
cost of all materials.
87 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( 40.00 Rmt 91.84
SCH- 40) for cold water including fittings as approved by Engineer In Charge.
Pipe shall be fixed on the wall with the help of MS Z clamp at every two metre
C/C or shall be concelled as directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with adhesive solvent, including
cost of all materials.
88 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( 90.00 Rmt 72.65
SCH- 40) for cold water including fittings as approved by Engineer In Charge.
Pipe shall be fixed on the wall with the help of MS Z clamp at every two metre
C/C or shall be concelled as directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with adhesive solvent, including
cost of all materials.
89 Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type 340.00 Rmt 831.22
B) conforming to IS 13592-1992 with one end plain and other end socketed
with rubber ring, & fittings conforming to ISI 14735-1999 of approved make
for drainage system pipe line, pipe shall be jointed with each other with
rubber lubricant, pipe shall be fixed on wall using of MS Z clamp of the size
160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center
to center or shall be concealed in walls as directed including necessary fittings
such as bends, shoes etc. including testing of pipes and joints and jointed with
adhesive solvent cement including cost of all materials.
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
90 Providing laying (to level or slopes) and jointing reinforced concrete Light duty 200.00 Rmt 665.48
non-pressure pipes I.S. class NP2 of the following internal diameter with
collars and butt ends prepared for collar joints including testing of joints
complete.(D) 300mm
91 Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type 30.00 Rmt 836.73
B) conforming to IS 13592-1992 with one end plain and other end socketed
with rubber ring, & fittings conforming to ISI 14735-1999 of approved make
for drainage system pipe line, pipe shall be jointed with each other with
rubber lubricant, pipe shall be fixed on wall using of Special type on Clamping
system made out From Z Clamps with nut/bolt wall Clips etc. of the size
mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to
center or shall be concealed in walls as directed including necessary fittings
such as bends, shoes etc. including testing of pipes and joints and jointed with
adhesive solvent cement including cost of all materials.
92 Providing, laying and jointing in true line and level 75 mm dia. UPVC SWRType 30.00 Rmt 698.92
B pipe conforming to IS 13592-1992 with one end plain and other end
socketed with rubbering and fitting conforming to ISI 14735-1999 of approved
make for drainage system pipe line, pipe shall be jointed with each other with
rubber lubricant, pipe shall be fixed on wall using of MS Z clamp at every
mm c/c or shall be conceled in walss as directed including necessary fittings
such as bends, shoes etc. including testing of pipes and joints and jointed with
adhesive solvent cement including cost of all materials.
93 Providing and fixing in PVC SWR cowel went 75mm dia to pipes.(B) 75mm 2.00 No 15.66
94 Providing and fixing in PVC SWR cowel went 110mm dia to pipes.(B) 110mm 2.00 No 28.79
95 Providing and fixing MS Z clamp on Wall or celling for Pipe Fitting including all 190.00 No 70.70
type necessary fittings and accessories etc. completed as per directed
engineer in charge.
96 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 22.00 No 571.08
diameter with jali of the following nominal diameter of self cleansing design
with C.I scread down or hinged grating including the cost of cutting and
making good the walls.
97 Providing and fixing wash down water closet dual flushing system type 8.00 No 4189.48
(European type W C pan) with integral P and S trap including jointing the trap
with soil pipe in cement mortar 1:1 (1 cement five sand) including providing
and fixing plastic seat cover for wash down WC with CP brass hinges and
rubber buffers back plastic seat and including providing and fixing PVC
flushing tank with a pair of C I or MS bracket with complete fitting such as lead
valve siphon 15 mm dia brass ball valve with polythene float CP brass handle
unions and couplings for connection with inlet out let and over flow pipes
mm dia porcelain enameled flush bend including cutting holes in walls and
making good the same connection the flush bend with cistern and closet
vitreous china.
98 Providing and fixing brass screw down stop tap.(A) 15mm dia. 22.00 No 205.83
99 Providing and fixing brass screw down stop tap.(C) 25mm dia. 4.00 No 220.82
100 Providing and fixing ball cock of approved. quality as directed.(A) Copper 2.00 No 189.84
Metal (ii) 50mm dia.
101 Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 2.00 No 663.43
102 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. 12.00 No 1506.45
brackets painted white including sutting holes and making good the same but
excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v
400mm size. (i) In white colour.
103 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mm dia. 12.00 No 67.91
104 Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. 12.00 No 78.75
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
105 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass 12.00 No 833.73
mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden
pluge with C.P. brass screws and washers.
106 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed 12.00 No 603.19
to wooden plugs with C.P. brass scews (B) 600mm x 20mm size.
107 Providing and fixing screw down bib taps of following size.(A) Brass screw 8.00 No 186.83
down bib tap polished bright. (i) 15mm dia.
108 Providing and fixing pillar tap, capstan head, screw down high pressure with 12.00 No 308.73
screws, shanks and back nuts. (i) 15mm dia.
109 Providing and fixing Urinal or approved quality including conecting the Urinal 6.00 No 1036.27
with waste pipe, tap etc. complete.(A) White earthenware flat back or corner
type size 430mm x 260mm x 350mm.
110 Providing and fixing in position 300 mm high, 150 mm wide English/Gujrati 150.00 No 707.00
letters made from 1.0 mm thick stainless steel sheet as directed by Engineer in
charge with all necessary tools & plants etc. complete.
111 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber 4.00 No 1246.92
and water tight C.I. cover with frame of 300mm x 300mm size (inside) with
standard weight (i) Square mouth traps (B) 150mm x 100mm size P or R type
112 Constructing brick masonry chamber for underground C.I. Inspection chamber 4.00 No 3208.77
and bends with briocks having croshing strength not less than 35Kg. Cm2 in
C.M. 1:5 precast RCC cover 455mm x 610mm intenal dimensions with frame
(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone
aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick
with cement mortar 1:3 finished smooth with a floating coat of neat cement
on walls and bed concrete etc. complete (i) Inside dimensions 455mmx
610mm and 450mm deep for single pipe line.
113 Constructing brick masonry chamber for underground C.I. Inspection chamber 4.00 No 3916.78
and bends with briocks having croshing strength not less than 35Kg. Cm2 in
C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal
dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of
cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-
cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation
concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished
smooth with a floating coat of neat cement on walls and bed concrete etc.
complete.(i) Inside dimensions 500mmx 700mm and 450mm deep for single
114 Extra over items for every additional depth of 0.1M. of part thereof beyond 2.00 Each 242.39
450mm depth for Brick masonry chamber.(i) for 455mm x 610mm size.
115 Extra over items for every additional depth of 0.1M. of part thereof beyond 2.00 Each 264.86
450mm depth for Brick masonry chamber.(i) for 500mm x 700mm size.
116 Providing cement vata (10cm x 10cm size) quarter round in cement mortar 1:1 90.50 Rmt 23.68
including neat cement finishing watering etc. Complete
117 Providing and fixing MS Ladder of required pattern with MS flats(30x3mm) or 400.00 Kg 108.07
round or square bars (12mm) at required spacing & with round headed bolts
and nuts or screws or welding including primer coat of approved quality and
two coats of oil paintas as directed by engineer in charge
118 Providing and fixing polished 18 mm thick black Granite with full round edge 4.20 Sqmt 2312.90
and double side polished of approved quality in between Urinal and fixing
with cement slurry & adhesive including moulding of both exposed edges as
directed by engineering in charge etc. complete.
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
119 Providing and fixing 0.45 meter wide sand which type wash counter platform 1.90 Sqmt 3411.78
including supplying and fixing granite stone of 18 mm thick mirror polished on
top and side posiition and vertical strip at front with cement slurry &
adhesive including moulding of both exposed edges over 25 mm thick kotah
stone platform fixing in top and sides and itermediates supports fixing with
cement mortar and adhesive and finishing with C.P. brass waste , M.I. fisher
union,pillar tap,Rubber plug all material and labour and assessories complete
120 Providing & Fixing 114mm wide G.I. Sheets having weight not less than 490 23.10 Sqmt 2732.05
Gm/m roll formed to create 84mm wide louver snap fixed on special shaped
GI channel. Opnebal louvers & channels shall finished with powder coating of
55 micron (1) 0.55mm thick sheet.etc. complet as per detail drawing as
121 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 20.00 Rmt 166.86
13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water
of following dia. nominal bore tube fittings and clamps including making good
the wall, ceiling and floor etc. complete.[A] 15 mm.
122 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 40.00 Rmt 249.72
13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water
of following dia. nominal bore tube fittings and clamps including making good
the wall, ceiling and floor etc. complete. [C] 25 mm.
123 Providing and Fixing 15 mm thick 300 mm x 300 mm Tactile Warning Tiles 3.30 Sqmt 1223.11
(Attention Tiles i.e. Tactile Warning Surface Indicator {TWSI}) of Johnsan
Endura Tac Button Yellow Plus or equvqlent make in flooring laid on 20 mm
thick cement mortar 1:6 (1 cement : 6 coarse sand) on new surface and
jointed with cement slurry including finished with flush pointing & cleaning the
surface for all floors as per detailed drawing etc. complete as directed by
Architect or Engineer in charge. Thse tiles shall be Anti Skid, Chemical
Resistant, Fade Proof, Frost - Heat & Weather Proof, High Flexural Strength,
Highly Durable, Stain Resistance . All Tactile Warning Tiles meet the specific
size and dimension standards as required by ISO/FDIS
124 Providing and Fixing a Set of wall mounted 38 mm dia U shaped horizontal 2.00 Per Set 2671.45
stainless steel collapsible grab bar , 38mm vertical stainless steel fixed grab
rail of grade SS 304 from round pipe supported and 75 mm dia 8 mm thick SS
304 base flange on wall including anchor fasteners, nuts, accessories as per
detailed drawing etc. complete as directed by Architect or Engineer in charge.
125 Providing and fixing of Ridge flashing for roof panel shall be made out of 0.5 250.80 Sqmt 858.67
mm thick pre coated GI sheet . The Precoated sheet shall be of minimum
mpa steel grade confirming to IS 14246:1995 and shall have zinc coating of
minimum 120 gsm as per IS:277:1992 , 5-7 microns epoxy primer on both side
of the sheet and polyester top coat 15-18 micron. The PPGI Sheet shall have
plastic protective guard film of minimum 25 microns to avoid scratches during
transportation. The ridge shall be fixed to the steel members by pop rivet or
self drilling/self stitching fastners @ maximum 450 mm c/c along length of
capping/flashing etc complete.
126 Steel work, welded in built up sections framed work including cutting, 9212.00 Kg 90.48
hoisting, fixing in position and applying a priming coat of read lead paint & two
coat oil paint. (A)In beams and joists, channels angles Tees, flats, with
connecting plates or angle cleats as in main and cross beams. Hip and jack
rafters, purlins conneted to common rafters and the like.
127 Drilling in soil with lowering of pipes concrete sealing including gravel packing 130.00 Rmt 545.40
clay breaking and development of bore with air compressor by required
capacity vertical test etc. complete including the cost of benimeter 250mm
128 Supplying slotted PVC pipes of approved quality at site of work confirming to 60.00 Rmt 555.50
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
129 Supplying PVC plain pipes of approved quality at site of work confirming to IS. 70.00 Rmt 494.90
130 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible 150.00 Rmt 104.03
Submersible copper cable approved make of following Size. (B) 3 Core x
131 Supplying submersible pump set suitable for bore of 150 mm. dia. or more 1.00 Nos 33557.25
having three phase motor capacity not more than 7.5 H.P. with following
capacity .. (B) ( 8 stage) 390 to 350 LPM discharge at 62 to 70 mtrs. head
respectively suitable for 50mm dia. delivery pipe Cat.III
132 Lowering of submersible motor pump set at the depth of following ,complete 1.00 Per 2568.43
with required. Nos. and size of casing pipes erected by means of proper chain
pulley block & pipe wrenches after checking of threads of each pipe with
coupling to take the load of the pump set and pipe assembly filled up with
water (B)Above 60 mtrs. and Up to 120 mtrs.
133 Providing and fixing to wall ceiling and floor HDP pipes tubes (medium grade) 100.00 Rmt 513.08
of the 50mm nominal bore, tube, fittings and clamps include. Making good the
wall ceiling and floor.(F) 50mm dia.
134 Providing and fixing gun metal cock of non return full way wheel valve.(F) 1.00 Nos 858.50
135 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 220.00 Rmt 336.24
poluthene pipes of the following outside Dia. Low densidy, complete with
special falnge compression type fittings, wall clipsetc. including making good
the wall ceiling and floor.(G)110 mm
136 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 75.00 Rmt 721.14
poluthene pipes of the following outside Dia. Low densidy, complete with
special falnge compression type fittings, wall clipsetc. including making good
the wall ceiling and floor.(G)160 mm
137 Providing junction for rain water juncton chamber of size 0.60x0.60x0.75m 2.00 No 6348.86
with excavation of size 1.96x1.96 m & 0.15m thick c.c.1:2:4 bed concrete
including brick masonary wall in CM 1:6 of 0.75m height & 0.23m thick with
15mm thick cement plaster inside & outside & 1.06x1.06 RCC (1:2:4) slab of
thickness 0.15m with CRS steel and 0.60mx0.45m cast iron manhole cover
with frame weight not less than 35 kg as per directed by Engineer-in-charge
138 Providing Filter chamber of Brick work in C:M 1:6 of size 2.06mx1.20m x1.20m 1.00 No 17851.75
& excavation dimension of 2.82mx 1.96x1.35m including C.C 1:2:4 bed
concrete of 0.15m thick including brick work in c.m 1:6 for 23cm thick wall
including 15mm thick cement plaster inside & outside with cement slurry &
10cm thick RCC 1:2:4 top cover with frame of minimum weight of 35 kg &
filling filter material kapchi in layers (25-40mm & 10-20mm) & BT metal 40mm
& sand as per directed by Engineer-in-charge.
139 Constructing brick masonry chamber for underground C.I. Inspection chamber 1.00 No 7180.44
and bends with briocks having croshing strength not less than 35Kg. Cm2 in
C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal
dimensions, total weight of cover with frame to be not less than 38Kg. (Wt. of
cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-
cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation
concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished
smooth with a floating coat of neat cement on walls and bed concrete etc.
complete.(iii) Inside dimensions 600mm x 850 mm and 450mm deep for
pipe lines with three or more inlets.
140 Providing and laying cement concrete 1:4:8 (1- Cement : 4- Coarse sand : 8- 25.00 Cumt 2660.45
graded stone aggregates 20 mm nominal size) and curing complete excluding
cost of formwork in (A) Foundation and Plinth
141 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- 31.00 Cumt 3683.34
graded stone aggregates 20 mm nominal size) and curing complete excluding
cost of formwork in (A) Foundation and Plinth
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
142 Providing and fixing pre-cast concrete kerb stone of gray cement based 391.00 Rmt 361.64
concrete block 30cm length,30cm height and 15cm thick of M250 grade
concret as per approved design and including excavation for fixing in proper
line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.
143 Box cutting the road surface to proper slope and camber for making a base for 520.00 Cumt 104.04
road work including removing the excavated stuff and depositing on the road
side slope as directed upto 50Mt.lead.
144 Construction of granular sub-base 150 mm thick by providing coarse graded 142.00 Cumt 736.29
machine crushed B.T. material satisfying MOST specification of grading I (B.T.
stone aggregate 53 mm to 26.5 mm 35 %, 26.5 to 4.75 mm - 45 % and
mm below - 20 % )including spreading in uniform layer with motor grader on
prepared surface, mixing by mix in place method with rotavator at OMC and
compacting with vibratory roller to achieve the desired density etc. complete.
145 Providing and laying wet mix macadam base course 250 mm thick using 237.00 Cumt 868.60
machine crushed B.T. chips as per required gradation mixing with required
optimum quantity of water, conveying the mix to site of work, spreading in to
grade and camber with mechanical paver and consolidation each layer with
vibratory roller including cost of material labour plant and equipment etc.
146 Providing &laying ave. 200 mm thick M-250 grade of controlled cement 189.00 Cumt 5709.53
concrete including dressing sub base providing and laying 200 micron thick
LDPE memberance over prepared sub base providing and mixing recron 3s
fiber at 875 gm/cmt. of concrete placing the concrete and leveling with
surface vibrator finishing the surface with power floater and trowel light
brooming on the surface as directed including Providing and filling exparsion
joint having size 20 mm x 115 mm & filling the expansion joint having size
mm x 20mm by using cloper -200 as per manufacturer's specification and
making construction joint having size 10 mm x 10mm by using concrete cutter
machine etc. complete.
147 Providing, laying (to level or slopes) and jointing reinforced concrete Light duty 100.00 Rmt 649.92
non-pressure pipes I.S. class NP3 of the following internal diameter with
collars and butt ends prepared for collar joints including testing of joints
complete. (i) 300mm
148 Providing and fixing pre-cast concrete kerb stone of gray cement based 186.00 Rmt 570.30
concrete block 30cm length, 45cm height and 15cm thick of M200 grade
concret as per approved design and including excavation for fixing in proper
line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.
149 Supplying of yellow or Goradu soil with all lead and Lift including spreading 203.00 Cumt 161.22
watering dressing and rolling with hand roller etc complete Selected soil.
150 Supplying of well rotted FYM manure with all lead and Lift including spreading 11.00 Cumt 303.00
mixing dressing and rolling with hand roller etc. complete.
151 Scarifying the surface of Soil including spreading of DAP fertilizer mixing with 1350.00 Sqmt 15.15
Soil properly levelling gand dressing of the plot
152 Supplying and planting Dibbing semi carpet lawn at distance of abour 15 cm x 1350.00 Sqmt 25.25
15 cm after proper anti termite teratment amd rolling the seme by hand roller
amd wetering etc complete.
153 Bowing and developing flowering plants grown in nusery having approximate 10.00 Nos 35.35
height 4 to 5 ft or Height ad per Landscaps Plan with natural growith of soil
packed in polithyline bag or Earthern pot. Including organic & chemical
fertilizer Pesticides, fungicides, hormones & maintaining the plants up to three
months as deserted. Bottol palm.
154 Bowing and developing flowering plants grown in nusery having approximate 5.00 Nos 50.50
height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and
nature colour planted in alump of soil packed in polithyline bag or Earthern
pot. Including organic & chemical fertilizer pesticides, fungicides hormones &
maintaining the plants uo to three months as deserted Trinagle Plan.
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
155 Bowing and developing flowering plants grown in nusery having approximate 10.00 Nos 50.50
height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and
nature colour planted in alump of soil packed in polithyline bag or Earthern
pot. Including organic & chemical fertilizer pesticides, fungicides hormones &
maintaining the plants uo to three months as Jasud
156 Bowing and developing flowering plants grown in nusery having approximate 5.00 Nos 70.70
height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and
nature colour planted in alump of soil packed in polithyline bag or Earthern
pot. Including organic & chemical fertilizer pesticides, fungicides hormones &
maintaining the plants uo to three months as Croton
157 Bowing and developing flowering plants grown in nusery having approximate 10.00 Nos 50.50
height 3 to 4 ft or Height ad per Landscaps Plan with natural growith and
nature colour planted in alump of soil packed in polithyline bag or Earthern
pot. Including organic & chemical fertilizer pesticides, fungicides hormones &
maintaining the plants uo to three months as deserted Croton
158 Bowing and developing flowering plants grown in nusery having approximate 5.00 Nos 45.45
height 3.5 to 4.5 ft or Height ad per Landscaps Plan with natural growith and
nature colour planted in alump of soil packed in polithyline bag or Earthern
pot. Including organic & chemical fertilizer pesticides, fungicides hormones &
maintaining the plants uo to three months as deserted Croton
159 Bowing and developing flowering plants grown in nusery having approximate 10.00 Nos 15.15
height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and
nature colour planted in alump of soil packed in polithyline bag or Earthern
pot. Including organic & chemical fertilizer pesticides, fungicides hormones &
maintaining the plants uo to three months as deserted Croton
160 Bowing and developing flowering plants grown in nusery having approximate 5.00 Nos 25.25
height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and
nature colour planted in alump of soil packed in polithyline bag or Earthern
pot. Including organic & chemical fertilizer pesticides, fungicides hormones &
maintaining the plants uo to three months as deserted Durenta Varigated.
161 Bowing and developing flowering plants grown in nusery having approximate 10.00 Nos 50.50
height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and
nature colour planted in alump of soil packed in polithyline bag or Earthern
pot. Including organic & chemical fertilizer pesticides, fungicides hormones &
maintaining the plants uo to three months as deserted Crotons Variety.
162 Bowing and developing flowering plants grown in nusery having approximate 300.00 Nos 20.20
height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and
nature colour planted in alump of soil packed in polithyline bag or Earthern
pot. Including organic & chemical fertilizer pesticides, fungicides hormones &
maintaining the plants uo to three months as deserted green mahindi
163 Bowing and developing flowering plants grown in nusery having approximate 5.00 Nos 45.45
height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and
nature colour planted in alump of soil packed in polithyline bag or Earthern
pot. Including organic & chemical fertilizer pesticides, fungicides hormones &
maintaining the plants uo to three months as deserted Varigated Ficus.
164 Bowing and developing flowering plants grown in nusery having approximate 10.00 Nos 20.20
height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and
nature colour planted in alump of soil packed in polithyline bag or Earthern
pot. Including organic & chemical fertilizer pesticides, fungicides hormones &
maintaining the plants up to three months as deserted New block ficus.
165 Labour charges for planting various plants after proper anti termite treatment 385.00 Nos 20.20
in pits including placing property and filling the pit with requred prepared mix
soil and wetering and dispporting etc complete.
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
166 Maintenace of Lawn and flower bed and plants include loosening soil,regular 1350.00 Sqmt 20.20
watering weeding,regular trimming/training,mowing of lawns twice a month
with all labor ,tools and tackles etc. for a period of one Year
167 Maintenance of Planted tree upto one year incl watering digging pilts rimming 385.00 Nos 151.50
applying fertilizer, insectiside, Pestiside and Pestisides and replacing plants if
necessary etc. complete for raising of plants weeding or soil working also incl
mainting water supply lines and drip lines of plantation (water and Electricity
supply by Deppt)
168 Rubber Hose pipe 15 mm dia of approved brand and make 50.00 Rmt 25.25
169 Providnig and fixing G I Nipple as directed. 4.00 Nos 20.20
170 Clearing and grubbing road land including uprooting rank vegetation grass 0.19 Sqmt 28393.05
bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of
trees cut earlier and disposal of unserviceable materials (C) By mechanical
means in area of light jungle
171 Earthwork for embankment including breaking clods, dressing with all lead 963.00 Sqmt 161.22
and lift (excluding watering and consolidation)(E) From Borrow area within
172 Rolling of earthwork in layers with power roller including filling in depressions 964.00 Nos 22.63
which occur during the process and Watering of earth work as directed.
173 Supply. installation, testing & commissioning of ISI approved electrical motor 1.00 No 98424.50
driven jockey pump set having 10.8 m3/hr. @ 70m head. The pump unit shall
be a horizontally direct mounted motor. Unit shall comprise the following
minimum requirements: a) Pump, b) Electric motor IE2, c) Foundation bolts, d)
Mating flanges with gasket and fasteners, e) Discharge gauges, etc. complete
in all respect, with labour.
174 Supply, installation, testing & commissioning of Priming tank, HDPE type, 1.00 No 25679.25
1000 litres, with necessary piping 100 mm size, G.I pipe for priming the
pumps, pipe of with butterfly valves for isolation, Water Filling to priming
tank by piping min. 50 mm size, with all complete.
175 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 6.00 Mtr 398.95
conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589, for
size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 1239, part-II,
Heavy class for size 150 mm dia. & below & IS: 3589, for size 200 mm dia.
above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc.
Hydrostatic testing for 2 hour's at 150% of the system pressure, hook-up
etc.Painting for piping, fittings & structural pipe support, shall be two coat of
zinc primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with
all accessories as per approved drawings, specicification and direction of the
Engineer-in-Charge, with all complete. 25 mm dia.
176 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 11.00 Mtr 641.35
conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589, for
size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 1239, part-II,
Heavy class for size 150 mm dia. & below & IS: 3589, for size 200 mm dia.
above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc.
Hydrostatic testing for 2 hour's at 150% of the system pressure, hook-up
etc.Painting for piping, fittings & structural pipe support, shall be two coat of
zinc primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with
all accessories as per approved drawings, specicification and direction of the
Engineer-in-Charge, with all complete. 50 mm dia.
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
177 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 11.00 Mtr 1176.65
conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589, for
size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 1239, part-II,
Heavy class for size 150 mm dia. & below & IS: 3589, for size 200 mm dia.
above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc.
Hydrostatic testing for 2 hour's at 150% of the system pressure, hook-up
etc.Painting for piping, fittings & structural pipe support, shall be two coat of
zinc primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with
all accessories as per approved drawings, specicification and direction of the
Engineer-in-Charge, with all complete. 80 mm dia.
178 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 80.00 Mtr 1691.75
conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589, for
size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 1239, part-II,
Heavy class for size 150 mm dia. & below & IS: 3589, for size 200 mm dia.
above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc.
Hydrostatic testing for 2 hour's at 150% of the system pressure, hook-up
etc.Painting for piping, fittings & structural pipe support, shall be two coat of
zinc primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with
all accessories as per approved drawings, specicification and direction of the
Engineer-in-Charge, with all complete. 100 mm dia.
179 Design , Supply and installation of Safety Signage made of Zinc Sulphilde based 5500.00 Sq. 9.44
glow in dark , Rigid sheet with High Luminous property enclosed in a inch
transperent weather proof UV stabilized plastic pasted on 3 mm thick clear
acrylic sheet such as EXITS, EMERGENCY EXIT, DO NOT USE LIFT DURING FIRE,
FLOOR MARKINGS, FIRE LIFT, STAIRCASE EXIT, FIRE ALARM CALL POINT, FIRE
HOSE REEL, FIRE HYDRANT POINT etc.
180 Supply, installation, testing & commissioning of pressure switch. (Range 0 to 1.00 No 2828.00
181 Supply, installation, testing & commissioning of 150 mm dia. dial Burdon 2.00 No 2742.15
Type Glycerine Filled pressure gauge with isolation ball valve arrangements
with necessary isolation valves with all complete.( Range 0 to 15 kg/cm2)
182 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly valve 2.00 No 2009.90
according to IS: 13095, PN-1.6, Iron Disc for size 150 mm dia. & below Lever
operated and above 150 mm dia. Gear operated complete with mating flanges
/ANSI class # 150 with bolts & nuts washers, rubber gaskets 3 mm thick, etc.,
with all complete. 50 mm dia.
183 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly valve 2.00 No 2565.40
according to IS: 13095, PN-1.6, Iron Disc for size 150 mm dia. & below Lever
operated and above 150 mm dia. Gear operated complete with mating flanges
/ANSI class # 150 with bolts & nuts washers, rubber gaskets 3 mm thick, etc.,
with all complete. 80 mm dia.
184 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly valve 2.00 No 3120.90
according to IS: 13095, PN-1.6, Iron Disc for size 150 mm dia. & below Lever
operated and above 150 mm dia. Gear operated complete with mating flanges
/ANSI class # 150 with bolts & nuts washers, rubber gaskets 3 mm thick, etc.,
with all complete. 100 mm dia.
185 Supply, installation, testing & commissioning of Cast iron body Dual Plate 2.00 No 1540.25
Wafer Type NRV conf. to IS: 210, PN-1.6 complete with mating Flanges class #
150 with bolts & nuts, washers, gaskets 3 mm thick, etc., with all complete
Accessories 50 mm dia.
186 Supply, installation, testing & commissioning of Cast iron body Dual Plate 1.00 No 3166.35
Wafer Type NRV conf. to IS: 210, PN-1.6 complete with mating Flanges class #
150 with bolts & nuts, washers, gaskets 3 mm thick, etc., with all complete
Accessories 100 mm dia.
187 Supply, installation, testing & commissioning of SG iron body SinglePlate 1.00 No 1111.00
Wafer Type NRV conf. to ASTMA 536, PN-1.6 complete with mating Flanges
class # 150 with bolts & nuts, washers, gaskets 3 mm thick, etc., with all
complete. Accessories 50 mm dia.
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
188 Supply, installation, testing & commissioning of SG iron body SinglePlate 1.00 No 1797.80
Wafer Type NRV conf. to ASTMA 536, PN-1.6 complete with mating Flanges
class # 150 with bolts & nuts, washers, gaskets 3 mm thick, etc., with all
complete. Accessories 100 mm dia.
189 Supply, installation, testing & commissioning of Y Type Strainer complete 1.00 No 5565.10
with mating flanges with bolts & nuts, washers, gaskets 3 mm thick, etc., with
all complete accessories. 80 mm dia.
190 Supply, installation, testing & commissioning of Y Type Strainer complete 1.00 No 7272.00
with mating flanges with bolts & nuts, washers, gaskets 3 mm thick, etc., with
all complete accessories. 100 mm dia.
191 Supply, installing, testing and commissioning of Normax make CI heavy duty 1.00 No 6161.00
ball type foot valve with flanges, nut bolts, gaskets etc. with necessary
complete accessories. 100 mm dia.
192 Supply, installation, testing & commissioning of Two way fire brigade Inlet 1.00 No 5135.85
connection with 63 mm dia. stainless steel (SS304) instantaneous male inlets
with built in non return valve in each inlet with 100 mm dia. header pipe,
suitable rubber cap and GI chain including nuts, bolts, washers, gasket 3 mm
thick, etc. with all complete.
193 Supplying FIRE bucket round bottom of 9 liters capacity made out of 24 gauge 8.00 No 1025.15
G.I Sheet with extra handle at bottom duly painted white inside and Red out
side with FIRE mark. Filled with dry-sand and kept on existing stand provided
or hung on wall hook.
194 Supplying and erecting floor mounting Stand for keeping four nos. of FIRE 2.00 No 5565.10
buckets comprising 1500 mm in length, 900 mm height frame made out of
30mm x 30 mm x 4 mm angle iron with cross supports legs, welded with
hooks and duly painted with one coat of primer and two coats of approved
enamel P O red paint.
195 Supply & installation of stainless steel body Orifice Plate of suitable inner bore 3.00 No 1070.60
along with matching flange - as per specification & requirement as per
hydraulic calculation.
196 Providing and fixing approved make Perforated C type cable tray. Made from 10.00 Mtr 471.67
pre- galvanized sheet steel. The cable tray should be bended as per IS
2062/1079 . with max 17.5% perforation with coupler plate / Fish plate and GI
hardware like nut - bolt and washers etc. erected on existing support as per
Specification and as per instruction of engineer in charge..(5) 300 X 50 X
197 Providing and fixing approved make Perforated C type cable tray. Made from 10.00 Mtr 322.19
pre- galvanized sheet steel. The cable tray should be bended as per IS
2062/1079 . with max 17.5% perforation with coupler plate / Fish plate and GI
hardware like nut - bolt and washers etc. erected on existing support as per
Specification and as per instruction of engineer in charge..(3) 150 X 50 X
198 Supply, installation, testing & commissioning of Oblique pattern type stainless 3.00 No 5433.80
steel (SS 304) single headed External Fire Hydrant Valve with 63 mm dia.
female instantaneous outlet conf. to IS: 5290, type - A, including mating
flanges, galvanised nuts, galvanised bolts/studs, washers & gaskets 3 mm thick
with all complete.
199 Supply, installation, testing & commissioning of 63 mm dia. stainless steel (SS 3.00 No 1757.40
304) Universal Branch Pipe conf. to IS:
200 Supply & installation, testing & commissioing of Fire Fighting Hose - conf. to IS 3.00 No 6969.00
: 636, type B (type- 3), The fire hose shall be 15 m long with 63 mm dia.
stainless steel (SS 304) couplings conf. to IS: 903, at both the ends for
connection with the hydrant valve and the branch pipe.
201 Supply, installation, testing & commissioning of fabricated from 3 mm MS 3.00 No 2525.00
sheet, hose box of size-450 mm x 600 mm x 250 mm - painted with Fire Red as
per IS: 5, shade no. 536 front 3 mm thick transparent glass with lock & key,
handle and brass hinges - to accommodate one number of 15 mtr long hose
and one number of universal branch pipe, including supporting arrangement
with civil work.
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
202 Supply, Installation, testing & commissioing of Swinging type mild steel hose 3.00 No 7403.30
reel drum with 20 mm dia. x 30 mtr. rubber hose as per IS: 884. The mounting
stand shall be of mild steel and the hose shall be fitted with a SS shut-off
nozzle & SS ball valve of 25 mm dia. including supporting arrangement with all
complete. accessories
203 Supplying, fixing & testing of of CI ball Valve 25mm dia. (Thread) 8.00 No 707.00
204 Filling Of Gaps Between pipe and Core Cutting Hole With Chemical and 18.00 No 298.96
205 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV 50.00 Mtr 136.35
grade to be erected as directed of following size. (E) 3 core 2.5 Sq. mm for
pressure switch
206 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 60.00 Mtr 285.83
Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in
existing trench / pipe at road crossing or floor of following size of cable.
(Only Fire Panel to Fire Pump) (B) 3 core 4 Sq. mm
207 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 40.00 Mtr 497.93
Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in
existing trench / pipe at road crossing or floor of following size of cable.
(Only Fire Panel to Fire Pump) (D) 3 core 10 Sq. mm (Only Fire Panel to Fire
208 Supply, Filling and Fixing of approved make ABC type fire extinguisher - 6 Kg. 60.00 No 1969.50
Capacity as per IS:15683 & IS :
209 Supply, Filling and Fixing of approved make CO2 type fire extinguisher. 10.00 No 5519.65
Capacity 4.5 Kg. (conforming to IS-15683).
210 Supply, Filling and Fixing of approved make ABC Moduler type automatic fire 4.00 No 3423.90
extinguisher. Capacity 5 Kg. (conforming to IS-15683).
211 Submitting the application to obtain Fire Plan Approval and After Completion 1.00 No 50500.00
of Work Obtain Final Fire NOC for 3 Year.
212 Supply, Installation and commissioning of Air Release Valve, 25 mm Dia. 1.00 No 1414.00
213 Supply, Installation and commissioning of Fire Alarm Panel Conventional type, 1.00 No 21397.86
4 zone, with complete accessories.
214 Supply, Installation and commissioning of Audio hooters , with complete 4.00 No 1070.60
215 Supply, Installation and commissioning of Manual Call Points, with complete 4.00 No 1010.00
216 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 200.00 Mtr 176.75
Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in
existing trench / pipe of following size of cables (A) 2 core 2.5 Sq. mm for Fire
217 Core cutting in wall and in RCC slab with size as below: 50 mm dia. Hole 6.00 No 342.39
218 Core cutting in wall and in RCC slab with size as below: 80 mm dia. Hole 2.00 No 428.24
219 Core cutting in wall and in RCC slab with size as below: 100 mm dia. Hole 5.00 No 514.09
220 Core cutting in wall and in RCC slab with size as below: 150 mm dia. Hole 3.00 No 598.93
221 Core cutting in wall and in RCC slab with size as below: 200 mm dia. Hole 2.00 No 855.47
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
222 Fire Hydrant Panel suitable for 10 hp Jockey pump, 1.00 No 20200.00
A) Incomer MCCB - 1 Nos
R Y B Indication - 1 Set
VAF Digital Meter - 1 Set B)
F 10 HP DOL Starter - 1 For Jockey Pump
With Battery Charger Control Circuit
With Auto - Manual On/Off On/Off Trip
Indication On/Off Push
Button C) Fabrication
Dully Powder Coated PO Red Colour,
Fabricated From 14/16 SWG,GI Sheet , IP-42 Protection,-Fixed Type Floor
Cable Entry : Bottom
223 Pay Legal Fees to Concern Authority for Obtaining Plan Approval and Final 1100.00 Sq.mt 8.08
224 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 138.00 Pt. 582.77
(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length , in below type of pipe erected with 6A
Modular type switch / bell push & accessories and earth continuity of
following type, erected on PVC / Metallic/Wooden box, single mounting base
frame covered with textured/metallic/white front plate modules erected on /
in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /
H.D.Connector as directed.(f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling completeCat. III
225 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 64.00 Pt. 809.01
both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper
wires up to 10 mtr length, in below type of pipe erected with 6A Modular
type switch and hum free EME step type electronic fan regulator mounted
and accessories with earth continuity of following type erected on PVC /
Metallic/Wooden box, single mounting base frame covered with
textured/metallic/white front plate modules erected on / in wall / ceiling as
per pipe erected. with necessary ceiling rose / H.D.Connector as directed.(f)
with medium class Rigid PVC pipe and accessories erected concealed in
wall/ceiling completeCat. III
226 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin 28.00 Pt. 309.06
socket erected on PVC / Metallic/Wooden box, single mounting base frame
covered with textured / metallic/white front plate modules erected on / in
wall / ceiling with following type accessoriesCat. III
227 Providing following type of Modular Type Accessories mounted with PVC / 10.00 Ea. 151.50
metallic/Wooden box, single mounting base frame covered with textured /
metallic/white front plate , modules erected with necessary connections as
per site situation directed by Engineer In charge.(1)One No. SP 6 Amp. Cat.III
228 Providing following type of Modular Type Accessories mounted with PVC / 6.00 Ea. 151.50
metallic/Wooden box, single mounting base frame covered with textured /
metallic/white front plate , modules erected with necessary connections as
per site situation directed by Engineer In charge.(2) One No 5 pin plugCat.III
229 Providing following type of Modular Type Accessories mounted with PVC / 24.00 Ea. 25.25
metallic/Wooden box, single mounting base frame covered with textured /
metallic/white front plate , modules erected with necessary connections as
per site situation directed by Engineer In charge.(7) Blank Plate Single
230 Providing following type of Modular Type Accessories mounted with PVC / 33.00 Ea. 160.59
metallic/Wooden box, single mounting base frame covered with textured /
metallic/white front plate , modules erected with necessary connections as
per site situation directed by Engineer In charge.(8) Computer RJ-45 socket
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
231 Providing following type of Modular Type Accessories mounted with PVC / 21.00 Ea. 180.79
metallic/Wooden box, single mounting base frame covered with textured /
metallic/white front plate , modules erected with necessary connections as
per site situation directed by Engineer In charge.(9) 16 Amp. SP one way
232 Providing following type of Modular Type Accessories mounted with PVC / 33.00 Ea. 199.98
metallic/Wooden box, single mounting base frame covered with textured /
metallic/white front plate , modules erected with necessary connections as
per site situation directed by Engineer In charge.(10) 6/16Amp. Universal
233 Providing following type of Modular Type Accessories mounted with PVC / 12.00 Ea. 410.06
metallic/Wooden box, single mounting base frame covered with textured /
metallic/white front plate , modules erected with necessary connections as
per site situation directed by Engineer In charge.(14) 16A Double Pole
Modular MCB Switch Cat.III
234 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following 660.00 Mtr. 24.24
size complete to be erected on/in wall or ceiling erected with necessary PVC
fittings & Junction boxes fixed with adhesive solution & Clamps with following
dia of pipes, in approved manner as directed (a)20 mm
235 Supplying and laying UPVC cable trunking system comprising unplasticised 60.00 Mtr. 277.75
polyvinyl, chloride rigid material with ignition free and flame proof confirming
BS with necessary end caps Internal and external bend, flat bends, coupler,
tee etc..All necessary accessories and measuring of following sizes (1) 75 mm
x 50 mm trunking
236 Providing and fixing approved make Perforated C type cable tray. Made from 10.00 Rmt. 622.16
sheet steel. The cable tray should be single or double bended as per required
and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS
2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI
hardware like nut - bolt and washers etc. erection with necessary support(
included) as per Specification and as per instruction of engineer in charge..(5)
300 X 50 X 2.0 mm Thick
237 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 1104.00 Mtr. 104.03
stranded Copper conductor wire in following type of pipe to be erected
concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS
PVC insulated stranded wire of green colour for earth continuity of following
size (A) With medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq.
238 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 300.00 Mtr. 140.39
stranded Copper conductor wire in following type of pipe to be erected in / on
wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded
wire of green colour for earth continuity of following size (A) with medium
class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm
239 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 90.00 Mtr. 184.83
stranded Copper conductor wire in following type of pipe to be erected in / on
wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded
wire of green colour for earth continuity of following size (A) with medium
class Rigid PVC pipe and accessories(b) 2 wire 6 sq. mm
240 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 90.00 Mtr. 326.23
stranded Copper conductor wire in following type of pipe to be erected in / on
wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded
wire of green colour for earth continuity of following size (A) with medium
class Rigid PVC pipe and accessories(h) 4 wire 6 sq. mm
241 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 30.00 Mtr. 532.27
stranded Copper conductor wire in following type of pipe to be erected in / on
wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded
wire of green colour for earth continuity of following size (A) with medium
class Rigid PVC pipe and accessories(i) 4 wire 10 sq. mm
(use earth wire of 4 sq.mm )
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
242 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi 18.00 Mtr. 70.70
stranded, annealed copper conductor with heat resistant PVC insulated
conforms to IS 694, IEC - 227 erected in existing pipe of following size
(Specifically for control panel, relays, power switchgears, motor starters &
control wiring) with required size of copper lugs, nuts and bolts if required. (e)
One wire 6.00 sq. mm
243 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi 72.00 Mtr. 295.93
stranded, annealed copper conductor with heat resistant PVC insulated
conforms to IS 694, IEC - 227 erected in existing pipe of following size
(Specifically for control panel, relays, power switchgears, motor starters &
control wiring) with required size of copper lugs, nuts and bolts if required.(h)
One wire 25.00 sq. mm
244 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv 96.00 Mtr. 58.58
grade ISI marked copper wires of following size to be erected as directed. (e)
1.50 Sq.mm 3 core round PVC sheathed
245 Supplying & erecting approved make LAN cable of following size in existing 660.00 Mtr 76.76
pipe as per direction [D] CAT - 6 e
246 Providing & erecting main Distribution (MDF) indoor type, back mounted 2.00 Ea. 1368.55
frame as per DoT standard approved with krone strips (b) Suitable for 20 pair
247 Providing & erecting Switch board for Computer or electric apparatus 33.00 Ea. 1133.22
consisting of following modular type accessories mounted with PVC /
Metallic concealed/open box with single mounting base frame covered with
textured/metallic /white front plate,modules erected with necessary
connections as directed
1 no. 6A/16A universal plug-switch combined.
3 nos. 6A Switch
3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III
248 Decorative call bell Ting-tong box type 250 volts complete erected 1.00 Ea. 71.71
249 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 84.00 Ea. 535.30
0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall
be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast
powder coated and high U.V. & corrosion resistance with diffuser with
company mark/name 160V to 270V, Power Factor more than 0.95, THD <
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have
shown ranges of Wattage capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges shown.)(A) Tube Light with
integral driver(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet Cat-lll
250 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 28.00 Ea. 1794.77
0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall
be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure
die cast powder coated and high U.V. & corrosion resistance with diffuser
housed in aluminium casted body with company mark/name
160V to 270V,Power Factor more than 0.95, THD < 15 %,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have
shown ranges of Wattage capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges shown.) (B) LED Panel Light
with provision for Plane front frame with translucent cover fixed to housing
complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2kV Cat-lll
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
251 Supplying and erecting led lamps with following wattage capacity of 220 to 10.00 Ea. 112.11
240 voltage, minimum 15000 burning hours life, 500 V in built-surge
protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp
holders, pf >= 0.5(A) LED Lamps integral type, with PC diffuser suitable LAMP
holder (ii) 5 to 8 watts Cat-III
252 Supplying & erecting single phase approved make industrial exhaust fan 15.00 Ea. 2054.34
suitable for medium duty ring mounted low noise operation suitable for
medium duty having following dia size and maximum speed in RPM [A] 300-
305 mm dia 900 RPM Cat.II
253 Supplying and erecting LED street light / Flood light fittings with High power 16.00 Ea. 5581.26
White LEDs wattage of 3 Watt and above assembled on single MCPCB,
efficiency more than 130 lm/w and corrosion free High pressure die cast
aluminum housing with smooth finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/ lenses, with toughened
glass with company mark/name engraved or embossed 160 to 270 V,Power
Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio
>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(
fittings required LM-79 & LM-80 certificates)(NOTE: Below description have
shown ranges of Wattage capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges shown.) (A) Street Light (IP-
65), Surge protection -4KV integral and ,Light must have 440VAC line supply
with over-voltage protection. (iv) 90 - 119 watts Cat-lll
254 (C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and 2.00 Ea. 4096.56
spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for
vertical mounting driver and accessories wired upto terminal block.IP 65(ii)32-
255 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with 64.00 Ea. 1948.29
double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm
sweep complete having 3blades with aluminium blades with , canopy &
cm. down rod erected with earthing.(Make shall be approved by Engineer in
256 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe 64.00 Mtr. 108.07
down rod erected duly painted for fan complete with proper insulation
without leakage and earthing.
257 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the 64.00 Ea. 108.07
RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S.
box / Heavy Duty PVC box complete erected concealed in Ceiling with
necessary finishing.
258 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan 64.00 Ea. 18.18
259 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 15.00 Mtr. 454.50
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or
in existing trench / pipe of following size of cables (D) 3 1/2 core 70 Sq. mm (
35 Sq. mm 1/2 core)
260 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 85.00 Mtr. 648.42
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or
in existing trench / pipe of following size of cables(F) 3 1/2 core 120 Sq. mm (
70 Sq. mm 1/2 core)
261 Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable Aluminium 420.00 Mtr. 112.11
conductor for 1.1 kV. to be laid on wall with necessary clamps or in existing
trench / pipe of following size of cables. (B) 2 core 6 Sq. mm
262 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / 892.00 Mtr. 151.50
Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary
clamps or in existing trench / pipe of following size of cables(B) 4 core 6 Sq.
263 Making trench in soft soil of suitable width of 90 cm deep for laying cable or 447.00 Mtr. 55.55
locating the fault all over the run and back filling the same and making the
surface as normal ground.
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
264 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground 10.00 Mtr. 226.24
across the road crossing or on floor with necessary material in an approved
manner and making the ground as per original. (F) 100 mm dia.
265 Providing & laying approved make Double walled corrugated pipes (DWC) of 377.00 Mtr. 62.62
polyethylene(conforming to IS 14930 II )with necessary connecting
accessories of same material at required depth in existing trench for laying of
cable. below ground / road surface for enclosing cable (A)50 mm outer dia
266 Providing & laying approved make Double walled corrugated pipes (DWC) of 60.00 Mtr. 137.36
polyethylene(conforming to IS 14930 II )with necessary connecting
accessories of same material at required depth in existing trench for laying of
cable. below ground / road surface for enclosing cable (D)120 mm outer dia.
267 Providing and, fixing heavy duty flange type brass cable gland with rubber ring 31.00 Ea. 38.38
for PVC insulated armoured cable complete with out going tails, insulating
tape etc for following size of cables.(B) 2 to 4 core 6 Sq. Mm
268 Providing and, fixing heavy duty flange type brass double compression type 2.00 Ea. 103.02
cable gland with rubber ring for PVC insulated armoured cable complete with
out going tails, insulating tape etc for following size of cables. (C) 3 & 1/2
269 Providing and, fixing heavy duty flange type brass double compression type 3.00 Ea. 140.39
cable gland with rubber ring for PVC insulated armoured cable complete with
out going tails, insulating tape etc for following size of cables. (E) 3 & 1/2
core 120 Sq. mm
270 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 336.00 Ea. 6.06
following size evenly crimped with high pressure tool & connected to
switchgear terminals with brass/cadmium plated nut bolts in an approved
manner. (A) 6 Sq.mm
271 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 17.00 Ea. 25.25
following size evenly crimped with high pressure tool & connected to
switchgear terminals with brass/cadmium plated nut bolts in an approved
manner.(E) 70 Sq.mm.
272 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 19.00 Ea. 45.45
following size evenly crimped with high pressure tool & connected to
switchgear terminals with brass/cadmium plated nut bolts in an approved
manner.(G) 120 Sq.mm.
273 Providing and erecting Approved make Four pole moulded case circuit breaker 3.00 Ea. 6790.23
having breaking capacity ICU of 25 KA. at 415 V,having normal current rating
up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on
A.C. supply 50 Hz. with all internal connections, spreader tinned copper &
complete erected in existing 16 G.M.S. housingg. ICS=100% of ICU only Cat
274 Providing and erecting Approved make Four pole moulded case circuit 2.00 Ea. 17843.67
breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal
current rating 200A.with variable Thermal & magnetic release suitable to work
on A.C.supply 50 c/s. with all internal connections, spreader tinned copper &
complete erected in existing 16 G.M.S.housing ICS=100% of ICU only Cat III
275 Providing and erecting Approved make Four pole moulded case circuit breaker 2.00 Ea. 23041.13
having breaking capacity ICU of 35 KA. and above at 415 V . having normal
current rating 250A. with variable thermal & magnetic release suitable to
work on A.C.supply 50 Hz. with all internal connections, spreader tinned
copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU
276 Supplying & erecting approved make Four Pole 415V change over switch 1.00 Ea. 13353.21
interior for panel mounting with operating mechanism A.C.23 duty confirming
to IS for (E)250A / 320A Cat-lll
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
277 Supplying and erecting triple pole & neutral 440V / 500V panel mounting 0.80 Rn.Mtr 1961.42
Copper Busbars with four equal Nos. of electrolyte bus having current density
not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly
wrapped with colour insulating tape for phase sequence of following current
carrying capacity, erected with necessary bus bar supports /insulators, main
cable socket to each bar, erected in existing cubical panel with necessary
connections. (A) Suitable for 100 Amp. Capacity
278 Supplying and erecting triple pole & neutral 440V / 500V panel mounting 2.20 Rn.Mtr 3202.71
Copper Busbars with four equal Nos. of electrolyte bus having current density
not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly
wrapped with colour insulating tape for phase sequence of following current
carrying capacity, erected with necessary bus bar supports /insulators, main
cable socket to each bar, erected in existing cubical panel with necessary
connections. (B) Suitable for 200 Amp. capacity
279 providing and erecting Miniature circuit breaker single pole 6A to 25A suitable 90.00 Ea. 123.22
to operate on 240 V A.C. system and having breaking capacity 10 KA to be
erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III
280 Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) 12.00 Ea. 306.03
having 10 KA breaking capacity & confirms to IS : 8828 in existing box having
following capacity (A) 6 to 32 Amp. Cat.III
281 Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) 22.00 Ea. 325.22
having 10 KA breaking capacity & confirms to IS : 8828 in existing box having
following capacity (B) 40 Amp. Cat.III
282 providing and erecting Approved make RCCBs conforming to IS: 12640 and 15.00 Ea. 2458.34
having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and
suitable for operation on single phase 240 V,50Hz. having characteristic of
quick action & tripping with all advance feature & do not incorporate any
electronic component. for following Max. rating erected as directed (ii)
40Amps. DP Cat. III
283 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) 12.00 Ea. 637.31
having 10KA breaking capacity & confirms to IS :8828 in existing box having
following capacity (A) 6 to 32 Amp. Cat.III
284 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) 13.00 Ea. 702.96
having 10KA breaking capacity & confirms to IS :8828 in existing box having
following capacity (b)40 Amp. Cat.III
285 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 11.00 Ea. 811.03
Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box
having following capacity (c)63 Amp. Cat.III
286 Sheets steel powder coated enclosure suitable for incorporating One/Two nos. 12.00 Ea. 176.75
287 Providing and erecting Sheet Steel powder coated MCB distribution board - 12.00 Ea. 629.23
flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,
Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house
appropriate nos. of MCBs.(The DBs should be used of same company of MCB
to be used) suitable for (A) single phase incoming and horizontal single phase
outgoing(b) sheet steel double door (IP-43) (i)4 way
288 Providing and erecting Sheet Steel powder coated MCB distribution board - 3.00 Ea. 1492.78
flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,
Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house
appropriate nos. of MCBs.(The DBs should be used of same company of MCB
to be used) suitable for(A) single phase incoming and horizontal single phase
outgoing(b) sheet steel double door (IP-43) (iv)12 way
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
289 Providing and erecting Sheet Steel powder coated MCB distribution board - 4.00 Ea. 2339.16
flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,
Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house
appropriate nos. of MCBs.(The DBs should be used of same company of MCB
to be used) suitable for(B) three phase incoming and single phase horizontal
type outgoing Per phase isolation type (PPI) (b) sheet steel double door (i)4
290 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 5.00 Kg. 794.87
291 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 12.00 Kg. 77.77
292 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. 4.00 Ea. 368.65
dia. galvanised iron pipe with coupling and buch buried in specially prepared
earth pit complete with necessary 8 SWG earth wire.
293 For using salt and charcoal / coke as required for pipe type earthing. 4.00 Ea. 171.70
294 Supplying & erecting earth pit of minimum bore dia.150mm size approved 2.00 Ea. 4591.46
make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of
50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-
250 Micron galvanising, connection terminal dia of 12mm with constant ohmic
value surrounded by highly conductive compound with high charge dissipation
suitable for following type of applications with chamber and heavy duty cover.
(A)(approved make OEM has to submit test certificate including value of earth
resistance of installation duly stamped and signed by agency and officer
Incharge has to ensure the value of earthing resistane mentioned in test
Certificate) & having back filling compound of (B) Inner chemical (CCM
Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,
Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back
fill Compound :- Earthing compound should be capable to retain moisture for
long time Necessary test report must be submitted by Agency. (a) For
Electrical Installation up to 440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
295 Providing & erecting weather proof, dust & vermin proof, floor mounted front 3.90 Sq.Mtr 14902.55
operated indoor type cubical panel board necessary IP-42 and above
protection as per approval from engineer incharge made from 14 SWG thick
CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for
internal partitions with necessary accesories , supporting angles/ flats channel
including cutting, bending, drilling, welding, riveting with internal partitions &
cable alley as per requirements & instruction of engineer-in-charge with
erection of supplied switch gears, BUSBARS, suitable size of inter connecting
PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite
control fuses/MCB for measuring instruments, earth bus & earth bolts,
foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles
with locking arrangement and rubber gasket,heavy duty end terminal
connection,danger notice board,necessary ventilation,earthing strip
complete. The Panel shall be painted with epoxy powder coating. (The rates
excludes the cost of switchgears, bus bars, inter connecting mains & Copper
Aluminium strips, meters, Fuses etc. The dimension shall be measured
excluding base beams) The panel shall be supplied with following approved
manufacturers with following size. (B) The standard companies switch gear
shall be used and only manufacturers at CPRI approved factory (i) with
296 Providing , erecting , fabricating the M.S. structure as per requirement on site 85.00 Kg. 77.77
incorporating proper size of M.S. angles,square,round, flats, bars, channels,
sections complete with cutting, welding, grinding & finishing duly painted with
one coat of red oxide with erection on site as per direction of engineer in
charge with necessary grouting, cementing, plastering & finishing complete.
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
297 Supplying and erecting approved make Octagonal pole made from HR sheet 16.00 Ea. 9011.22
steel. The pole should be made as per IS. and shall be coated with hot dip
galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with
integral Junction box consist of terminal plate of min 6mm Hylam sheet,
standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal
and arrangement for cable termination to be erected With Suitable
foundation (Included) as per details given by manufacturer considering site
requirement. (D) 6 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm
thickness with 200mmX200mmX12mm base plate, 4-M20 Bolts and 600mm
long with necessary G.I. J Bolts .Approx Pole weight 59 kg
298 Supplying & erecting approved make SMC press moulded composite FRP. 2.00 Ea. 515.10
loop-in, loop-out approx. 2mm thick box complete with Bakelite connector
strip 5way(3P+N+E),DIN rail for mounting mob & hinged doors as per
requirement having locking arrangements with mounting clamp with nuts,
bolts & washers suitable for erection on pole with cable clamps& earth bolt of
following size of box. (B) 250mm x 200mm x 100mm [deep]
299 Supplying and erecting Street light pole bracket comprising main B Class GI 16.00 Ea 491.87
pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve
tubing of approx. 45cms.length and suitable for 76.5mm/80mm/require size
of pole top having nuts and bolts for fixing the brackets and having spread of
0.5 mtr. Length with 110 deg.with vertical plane and suitable welded stiffener
reducer and nipple with check nut complete painted with one coat.of Red
oxide / PU base primer and two coats of Aluminium / PU paint. paint with
following nos of arms. [A] Single Arm bracket 0.5 Mtr
300 Providing & erecting water cooler having storage capacity 150 Ltr. & cooling 2.00 Ea. 61482.74
capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the
water should drop by 15˚C within a hour, The water cooler should be
comprising of hermetically sealed compressor, fan motor, condensing unit,
water tank surrounded by evaporating, coil, thermostats, relay etc.complete
with necessary inlet & outlet connection. The body of water cooler will be
made from Stainless Steel.
301 Supplying & erecting 5 stage single reverse osmosis water purification system 2.00 Ea. 29187.99
with M.S. powder coated frame, prefilter housing with 'O' ring presediment
filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention
with 40 psi inline type post carbon filter auto low & high pressure switches
with following size of storage tank & LPH capacity & erected as directed [C]
50 Ltr / Hr with 150 psi 2 nos booster pump
302 Providing and erecting Inverter based approved make Cassette type split air- 6.00 Ea. 76305.50
conditioning unit consisting of condensing unit with fan motor, hermetically
sealed scroll/rotary compressor with accessories etc. duly connected
separately erected evaporating unit and blower motor with its accessories by
Eco friendly Green gas charging & Internal copper wiring & Remote control (
star and above of current year) with necessary core cutting (A) for 1.5 ton
303 Providing and erecting Inverter based approved make Cassette type split air- 6.00 Ea. 88804.25
conditioning unit consisting of condensing unit with fan motor, hermetically
sealed scroll/rotary compressor with accessories etc. duly connected
separately erected evaporating unit and blower motor with its accessories by
Eco friendly Green gas charging & Internal copper wiring & Remote control (
star and above of current year) with necessary core cutting (B) for 2 ton
304 Supplying and erecting insulated pair of soft copper tubing open or concealed 96.00 Ea. 1158.47
including power and control cable,necessary PVC drain pipes for Split AC
machine up to 4 TR capacity
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
305 Supplying and erecting approved make Single phase power conditioners 12.00 Ea. 3232.00
suitable for input voltage 180V / 280V, output voltage 220V (+ / - 10%) AC
‘Hz with electronic relays & component of housed in sheet metal cabinet
‘with epoxy powder coated, with high - low cut-off, time delay, voltmeter,
selector switch, 5/15 A universal socket with range off (D) 4 KVA
306 Supplying and erecting approved make panel mounting type Digital Voltmeter 3.00 Ea. 1275.63
having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel
board with all connection, wiring etc .with manufacturers calibration
307 Supplying and erecting approved make panel mounting type Digital Ammeter 3.00 Ea. 1558.43
having 3 digits LED display, external CT operated, calibrated for 0 to
Amps suitable to operate on 500 Volt AC , erected on existing panel board
with all connection, wiring etc .with manufacturers calibration certificate.
308 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC 6.00 Ea. 317.14
Supply 500 V on existing panel board with necessary connections.
309 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 9.00 Ea. 274.72
1000/5 ratio 15 VA burden erected in existing CRCA box duly secured with
insulating materials connected to the meter
310 Supplying and erecting approved make suitable panel indicator LED type lamp, 9.00 Ea. 43.43
lens cover, complete erected with necessary connections.
Rupees Two Crore Eighty Nine Lakh(s) Sixty Three Thousand Five Hundred Eighty Seven And Paise Twenty Three Only
I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the estimated rates
mentioned above amount of my/your tender works out as under.
*Estimated Amount *Estimated Amount
put to Tender Rs. 28963587.23 put to Tender Rs.
Deduction …………….. % below………………… Add ………… % above Rs. …………….
1 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with detailed
specification and details of work and amount Involved at site without any payment as directed by Engineer-In-Charge.
2 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.
3 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor under his
4 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work under all
condition, site, moisture/ weather etc.
5 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government Resolution
T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the work order.
6 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by Executive Engineer
Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to Tender.
7 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other Construction works
walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated 9/12/2005 notification Of Labour &
Employment department dt.03/01/2005 & Labou & Employment Department Letter no GWA/2004-841M(B) Dt 14/12/2005 &
8 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of Cement
Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.
9 Contractor are advised to visit site before loading tender rate.
10 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and drainage & water
supply connection and minor correction to perform experienced in Lab shall be done by contractor at his risk and cost.
11 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.
12 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.
Item Quantity Unit Estimated Total Amount
Item Quantity Unit Estimated Total Amount
No. Rates according to
In figure estimated
Rs. Ps. quantities
13 GST and Income tax TDS will be deducted at a source while making payments of bills.
14 GST will be paid extra as per Govt. amendment.
15 The Materials on the work shall have to be used and carried out as specified in technical note.
(A) I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding
materials,Labour and other factors pertaininfg to work before submitting tender.
(B) I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender Document of
this work and agree to execute the same accordingly.
Deputy Executive Engineer
Valsad (R&B) Sub-Division
Signature of Bidder
Executive Engineer Executive Engineer
Ele. (R&B) Division Valsad (R&B) Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ.pdf
Building-Specification Booklet.pdf
Drawing ITI Work Shop Lilapor.pdf
FINAL _ SBD (Electrical Work).pdf
GR 1.pdf
GR.pdf
MOU Electrical Work.pdf
NIIT.pdf
NOMINATED ELECTRICAL SUB CONTRACTORS.pdf
SBD.pdf
Special condion Electric.pdf
SPECIFICATION.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].