Providing partition walls and other civil works for BSB 111 and BSB 109 in IISER campus

Amount

Taking out doors, windows and clerestory window shutters (steel or wood or aluminium) including stacking within 50 metres lead :

Of area beyong 3 sq. metres

Demolishing brick work/block work manually/ by mechanical means including stiffner/lintel beams & its reinforcement and stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

In cement mortar

Re-fixing the dismantled/departmentally supplied doors including door frames, shutters and door accessoriesm etc in new position including resizing required size and as directed by EIC with required hold fast lugs or with dash fasteners of required dia & length, etc completed all as directed by EIC.

Providing and Constructing hollow Cement Concrete block masonry in Cement Mortar 1:6 ( 1 cement : 6 coarse sand) using factory made, load bearing, approved quality Cement Concrete blocks of specified size, Grade A (3.5), set to level plumb including setting in position, providing scaffolding, curing, raking out joints wherever required etc., complete with all leads and all as per specification and directions of the Engineer-in-charge.

IN SUPERSTRUCTURE UPTO FLOOR V LEVEL For 100-200 mm thick walls

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form for

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

12 mm cement plaster of mix :

1:6 (1 cement: 6 fine sand)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

Fixed Portion Anodised aluminium (Aluminium sections alone will be supplied by IISER at free of cost all other materials like aluminium angles, screws, fischer, rivets, beadings, etc shall be provided by the contractor)

Providing and fixing in wall lining using 12 mm thick Calcium Silicate Boards with necessary fixing arrangements and screws etc. All joints shall be provided with adhesive dry wall joint tap, etc complete all as directed by EIC

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium/wooden door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket/wooden beading etc. complete as per the architectural drawings and the directions of engineer-in-charge.

With float glass panes of 5 mm thickness

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing bright finished aluminium door lock without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineerin-charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Twin rubber stopper

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour including applying primer of approved brand

Two coats or more coats

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work

Providing and fixing of ±12mm Thk Toughened glass partition/vision panel of approved make finished as per the design . The ±12mm Thk Toughened will be fixed with "U" Channels/patch fittings of approved brand with necessary supports and finishes etc as instructed by the engineer -in -charge .

TOUGHENED GLASS DOOR : Providing & fixing ±12mm Thk Toughened door of approved dimension as per the design .The door works id inclusive of necessary hardware's such as floor spring, concealed dead lock ±12"S.S Handles , Top and Bottom patch etc all as required hardware complete as directed. The rate is inclusive of all related civil works such as floor cuttings ,filling etc as required

900x 2100 mm Thk Toughened Single Leaf door (Approx dimenion )

Supply and applying of approved shade of frosted film as per the design in the designated areas. The surface preparation should be made before the installation in order to attain a smooth finish. The films should be installed towards the clean surface with the help of recommended patch tools etc., as required. The films should be fixed towards the glass in the designated area as per the design and comments from the engineer-in-charge. Total glass area covered without deduction of cut patches/design will be considered for payment

Providing and fixing zebra blinds for windows with required roller fixed in ms painted/powder coated bracket and roller shall be cover with approved colour, quality fabric including necessary hardware, pulling system etc, complete all as directed by EIC

THOMAS V T (BID ID -3279910)