ARC work of Attend the cable fault at site within 03 HRS from receiving the message from D.E OF concern S/DN AND Locating the Fault underground Cable for ALL scheme in the jurisdiction of Mota Borasara S/dn of KIM Division. Through outsourced agency for existing DGVCL Network for SDN under Kim Division.

ARC work of Attend the cable fault at site within 03 HRS from receiving the message from

D.E OF concern S/DN AND Locating the Fault underground Cable for ALL scheme in the

jurisdiction of Mota Borasara S/dn of KIM Division.

Item Code No. Description Unit Rate Amount

Labour charge for excavation of cable trench of Meter

400mm width x 1200mm depth, in any type of soil for

1 9925000001 laying of cable of size up to 240 mm2 (For additional

cable 200 mm additional width shall be considered i.e.

half trench length is to be considered

Labour charge for excavation of cable trench of Meter

600mm width x 1200mm depth, in any type of soil for

2 9925000002 laying of cable of size up to 240 mm2 (For additional

cable 200 mm additional width shall be considered i.e.

half trench length is to be considered

Labour charge for excavation of cable trench of Meter

400mm width x 1500mm depth, in any type of soil for

3 9925000003 laying of cable of size up to 240 mm2 (For additional

cable 200 mm additional width shall be considered i.e.

half trench leng th is to be considered

Labour charge for laying of 11kV / 22 kV XLPE Cable Meter

of size up to 240 mm2 & preparation of sand layer

100mm thick, in the cable trench & covering the cable

with 150 mm dia (Outer), thickness 25 mm, 1.0 meter

long RCC half round muffs and providing and fixing of

4inch width yellow colour polyethylene tape with

printing"CAUTION ELECTRIC CABLE BELOW' at

0.75 m depth from ground surface after laying cable in

trench. This will provide indication that electric cable is

passing underground so as to protect cable from

mechanical injuries, refilling the same, as per

Instruction of E gineer in Charge (EIC) .

File No: DGVCLDOKI/TEN/e-file/6817/2026/0588/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0024/02/2026 Approved Date: 02-02-2026

Labour charge for horizontal drilling using Auger Meter

machine without damage to surface road at max

mtrs depth & putting of 6.11 kg/cm2 , class-4,Green

color, 110mm 0.D. 8.5mm thickness H.D.P.E. pipe

confirms to IS 4984-1987(3rd revision) and BIS

certification and laying of 11KV/22KV XLPE cable of

size up to 240 mm2 in HDPE pipe, as per Site

Condition (excluding cost of pipe). The detail map

obtained from HDD machine and excel sheet hard and

soft copy) indicating the respective depth and distance

from adjacent landmark for each segment for HDD is

must require to be submitted. HDD to be carried out at

depth 1.5 mtrs to 2.0 mtrs as per site conditions and

as er instruction of EIC.

Labour charge for horizontal drilling manually without Meter

damage to surface road at max 2.0 mtrs depth &

putting of 6.11 kg/cm2 , class-4,Green color, 110mm

O.D. , 8.5mm thickness H.D.P.E. pipe confirms to IS

4984-1987(3rd revision) and BIS certification and

laying of 11KV/22KV XLPE cable of size up to

6 9925000006 mm2 size, as per Site Condition (excluding cost of

pipe). The detail map and excel sheet (hard and soft

copy) indicating the respective depth and distance

from adjacent landmark for each segment of cable to

be submitted. Drilling to be carried out at depth

Minimum 1.2 mtrs to 2.0 mtrs as per site conditions as

per instruction of EIC.

Supply of 6.11kg/cm2 , class-4,Green color, 110mm Meter

O.D. , 8.5 mm thickness H.D.P.E. pipe confirms to IS

4984 and BIS certification for laying of underground

11KV/ 22KV XLPE cable up to 240 mm 2 size.

Labour work for RCC concreting on disputed location CMT

and repairing of damage portion of road crossing for

the work carried out for roads crossing as well as

concreting & muffing of poles including all materials

Providing & fixing concrete stone route marker of 300 No

mm width x 150 mm thick x 650 mm height embedded

in earth at least 300 mm below & 350 mm above

ground level respectively at distance approx.

meters along the length of cable. The RCC concreting

(1:2:4)(all necessary materials will be in bidder's

scope) of route marker is to be carried out 300 mm

width x 150 mm thick x 300 mm below ground level as

per instruction of EIC. The route marker should be

with name of company with approved yellow colour-

DGVCL. The distance from marker to cable and cable

depth with feeder name etc., marked with arrow sign

is to be painted on it. The route marker is to be fixed at

location near to any fixed permanent location (not

necessary to fix exact on top of cable) as per

instruction of EIC.

File No: DGVCLDOKI/TEN/e-file/6817/2026/0588/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0024/02/2026 Approved Date: 02-02-2026

Labour charge for erecting of 11kV / 22 kV XLPE perJob

cable of size up to 240 mm 2 on DP Structure with

fixing of 02 Nos polymer cleats on top and middle part.

Polymer cleats, nut bolts etc. fixing material to be

provided by contractor.

Providing & fixing of 6.11kg/cm2 , class4,Green color, perJob

110mm O.D. 8.5mm thickness H.D.P.E. pipe confirms

to IS 4984 and BIS certification on the erected DP

structure for the mechanical protection of cable by

inserting the cable inside HDPE pipe. The HDPE pipe

shall be erected in such a way that 300mm shall be

below the ground level and the rest 2700 mm shall be

supported on the DP Structure with 01 No Polymer

cleat. All materials including polymer cleat and Nut

bolt to be provided by contractor.

Providing and fixing of pipe type earthing from 80 mm No

dia class-B GI pipe with pit to be filled with salt & coke

and construction of chamber as per DGVCL Drg. No.

1 9925000016 dg /100 for DP and cable. The earthing pit should be

joined with cable by G.I. strip of size 1" width & 2 mm

thick. All material GI pipe, Coke Salt etc will be

supplied by bidder.

Supply & fixing of heat shrink type end terminations No

1 9925000017 (outdoor) for up to 11kV 3C x 185 mm2 size XLPE

cable as per DGVCL technical s ecification

Supply & fixing of heat & shrinkable end terminations No

2 9925000018 (outdoor) for up to 22 kV 3C x 185 mm 2 size XLPE

cable ( as per DGVCL technical specification)

Supply & fixing of heat shrinkable type end No

terminations (indoor) for up to 11kV 3C x 185 mm

size XLPE cable as per DGVCL technical

Supply & fixing of heat & shrinkable end terminations No

4 9925000020 (indoor) for up to 22 kV 3C x 185 mm 2 size XLPE

cable as per DGVCL technical specification

Supply & fixing of heat shrinkable straight through No

5 9925000021 joint for up to 11kV 3C x 185 mm 2 size XLPE cables

as per DGVCL technical specification.

Supply & fixing of heat shrinkable straight through No

6 9925000022 joint type for up to 22kV 3C x 185 mm 2 size XLPE

cable as per DGVCL technical specification

Labour charge for excavation of 2100mm long x No

1200mm wide x 1200 mm deep joint pits for

installation of 11kV / 22kV Straight through joints as

7 9925000023 per instruction of engineer-in-charge & covering the

cable with 150 mm dia (Outer), thickness 25 mm,

meter long RCC half round muffs & refilling same as

per instruction of EIC .

File No: DGVCLDOKI/TEN/e-file/6817/2026/0588/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0024/02/2026 Approved Date: 02-02-2026

Providing and fixing of insulating bus bar, made from No

11KV/22KV XLPE cable after removal of semi

conducting layer and applying of PVC heat shrinkable

antitracking core insulating tubing (1.1KV), on both

end terminal using Aluminium long barrel heavy duty

up to 240 sq mm lugs, Aluminium bus connector.

9 9925000024 Taping with PGclamp for bus conductor as per

drawing and as per instruction of EIC. The Allurninium

lugs and PG clamp shall be covered with 11KV/22KV

HT insulating tapes.(11KV/22KV XLPE cable will be in

scope of DGVCL while all other materials will be in

bidder's scope.

Testing of cable at various points and commissioning No

the feeder as per instruction of engineer-in-

charge.Test result shall be submitted by contractor

Preparation and submission of 6 (six) copies, of Set

complete layout drawings with GIS mapping as per

actual cable routing showing road crossing, HDPE

pipe sleeving, jointing locations, markers etc.

To Attend the cable fault at site within 03 hrs from No

9 9925000047 receiving the message from D.E of concern S/dn and

locating the fault under ground cable.

TOTAL AMOUNT :-Twenty Lacs Only 20,00,000/-

TOTAL AMOUNT :-Twenty Lacs Only 20,00,000/-

Executive Engineer

DGVCL, KIM IND DIVISION.

File No: DGVCLDOKI/TEN/e-file/6817/2026/0588/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI