Construction of 2 Nos. (30.00 mtr. span each) RCC Box Girder Bridge including both side approaches on over Soon Khad on Garla Dei Bhawarna via Henja Swargjan link road at RD 0/266 and 1/515 under SCSP

Amount

Earth work in excavation for all type of bridge structure in all type of classification of soil, comprising of ordinary soil, ordinary rock, hard rock chiseling / wedging out rocks (where blasting is prohibited) as per drawing and MORT&H technical specification section 300 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto all leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable / approved materials to the original surface in layers not exceeding 150 mm (one hundred fifty millimetres) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain/ reinforced concrete in open foundation for all type of structure complete of plain cement concrete nominal mix 1:3:6 ( One cement : three sand : six graded crushed/ broken stone aggregate 40mm ( forty millimetre) nominal size on ground or under water and curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arise at the time of laying concrete complete for all heights/ depths including the cost of form work as per drawings and MoRTH technical specification section 1500, 1700 and 2100 as per the direction of the Engineer-in-Charge including carriage of material within all leads and lifts and other incidental . The rate is including octroi, royality, Malkana. toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete Grade- M-20 (M-Twenty) design mix with minimum cement contents of 330 Kg per cubic metre and graded crushed stone aggregate 40mm (forty millimeter) nominal size in substructure as per drawing and MORT&H technical specifications section 1500, 1700 & 2200, including the cost of form work, curing complete and hauling of materials in all kinds of leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including of octroi, royality, Malkana, toll tax or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete Grade- M-30 (M-Thirty) design mix with graded crushed stone aggregate 40mm (forty millimeter) nominal size using cement concrete not less than 407 Kg (Four hundred seven Kilogram) per cubic metre with 20mm (twenty millimetre) size crushed stone aggregate in substructure bed block and dirt wall etcetra complete as per drawings and MORTH technical specification section 1500, 1700 and 2200 including the cost of form work, curing complete in all height and hauling of materials in all kinds of leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, Malkana. toll tax or other taxes imposed by the Government.

Supplying, fitting and placing HYSD bar reinforcement in sub structure complete with straightening, bending, binding of bars including the cost of binding wire in all heights / depths as per drawing and MORTH technical specification section 1600, 2200 and as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana,tolltax Sale Tax, GST or other taxes imposed by the government.

Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and MORT&H technical specification 710.1.4.of IRC:78 and 2200 and as per the entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads and lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 100mm dia ( One Hundred millimetre) diameter P.V.C. pipe weep holes in brick masonry/ stone masonry, plain/reinforced concrete abutment, wing wall, return wall and retaining/breast walls through the full width of the structures with slope of 1(V): 20 (H) (one vertical: twenty horizontal) towards draining face complete as per drawing and MORTH technical specifications clause 2706 and as per the entire satisfaction and direction of Engineer- in-Charge including carriage of materials within all leads and lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-30 (M- thirty) mix design having cement contents not less than 407 kg. (Four hundred seven kilogram) per cubic meter with 20mm (twenty millimetre) nominal size crushed stone aggregate in super structure as per MORTH specification section1500, 1700 & 2300 including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in deck slab wheel guard in all heights/ depth level and curing complete including hauling of materials in all kinds of leads lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-charge. The rate is including of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying M-15 grade cement concrete with ordinary portland cement not less than 275 Kg (Two hundred seventy five) Kilogram per cubic metre using stone aggregate 20mm (Twenty millimetre) nominal size and approved quality sand mechanically mixed, vibrated and curing complete in open foundation, lelvelling course below approach slab as per the Drawings and MORTH Technical Specifications section 1500, 1700 and 2100 including carriage of material with in all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete design mix to obtain minimum compressive strength of grade M-30 (M- thirty) using cement contents not less than 407 Kg (Four hundred seven Kilogram) per cubic metre in approach slab including reinforcement complete with bending, binding, straightening of bars, cost of binding wire and cost of curing and form work complete in all heights / depths as per drawing and MORT&H technical specifications section 1500, 1600, 1700, 2700 and as per the directions of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Supplying, fitting and placing HYSD bar reinforcement in super structure complete with straightening, bending, binding of bars including the cost of binding wire in all heights / depths as per drawing and MORTH technical specification section 1600 and 2300 and as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, tolltax, GST or other taxes imposed by the government.

Construction of reinforced cement concrete railing with mechanically mixed and vibrated M-30 grade (M-Thirty grade design mix cement concrete having cement contents not less than 407 kg (four hundred seven killogram) per cubic metre using graded crushed stone aggregate 12 mm (twelve millimetre) nominal size in cast in situ and precast members and curing complete; constructing railing true to line and grade, tolerance of vertical railing post not to exceed 1 in 500 (one in five hundred), centre to centre spacing between vertical post not to exceed 2000 mm (two thousand millimetre) including the cost of reinforcement and form work as per drawing and MORTH technical specifications section 1500, 1600, 1700, 2700 including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the government.

Providing and fixing drainage spouts complete as per drawing and MORTH technical specification section 2700 and as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the government.

Supplying, fitting and fixing in position true to line and level cast steel rocker bearing conforming to IRC: 83(Pt.-1) section IX and clause 2003 of MoRTH specifications complete with all accessories as per drawing and Technical Specifications including carriage of material with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Supplying, fitting and fixing in position true to line and level forged steel roller bearing conforming to IRC: 83(Pt.-1) section IX and clause 2003 of MoRTH specifications complete with all accessories as per drawing and Technical Specifications including carriage of material with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying of strip seal expansion joint catering to maximum horizontal movement upto 70 mm (seventy millimetre) complete as per drawings and as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana,toll tax, GST or other taxes imposed by the government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure as per drawing and MORT&H. technical specification clause 2702 RCC Grade M-30 (M- thirty) designed mix with minimum cement contents of 407 kg. ( Four hundred seven) Kilogram per cubic metre with 20mm (Twenty millimetre) nominal size graded crushed stone aggregate and curing complete including cost of form work and reinforcement for reinforced cement concrete work in wearing course complete as per the direction of Engineer-in-charge including carriage of material within all leads and lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax or other taxes imposed by the Government.

Excavation in hilly area in all heights and depths and in all kind of soil by mannual/mechanical means including saturated soil comprising of ordinary soil, soft rock, hard rock, chieselling, wedging out of rock (where blasting is prohibited) and their intermediate classification of soil, setting out true to the required lines, grades, cutting and trimming of side slopes and level as shown in the drawing and as directed by Engineer-in-charge at site according to the MORD technical specification section 300 and 1600 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus material to the approved dumping sites through all modes of transportation including head load or animal transport or mechanical means along with its leveling fine dressing and carriage of machineries, materials, tools, equipment and safety measured and other incidentals necessary to complete the work by mechanical means and labour if required. Recovery of stones to the tune of 3.61 cubic metre quantity at the rate of Rs. 300/- per cum shall be effected from the contractor's running bill on Pro-rata basis as per actual quantity executed. Any loss to the public, private property during the course of execution shall be the absolute responsibility of the contractor, which shall have to be compensated by him in all cases. The rate is including octroi, royality, Malkana. toll tax, GST or other taxes imposed by the Government.

Construction of embankment with approved materials deposited at site from road way cutting and excavation from drains and foundations of other structures or other sources graded and compacted in 200mm( two hundred millimetes) thickness in every layers and compacted with three Wheel Road Roller 80-100 ( eighty-hundred ) KN static weight roller to meet the requirement of tables 300.1 and 300.2 as per M.O.R.D. technical specification Clause 301 and 1603.5 and as per the entire satisfaction and direction of the Engineer- In –Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Earth work in excavation for foundation of structure such as retaining walls, breast walls, culverts, drains and parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks ( Where blasting is prohibited) as per drawings and M.O.R.D. technical specification section 300 and 1600 as per direction of the Engineer- In – Charge including setting out, shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm ( one hundred fifty millimeter) compacted thickness of each layers including shoring and strutting and pumping and bailing out water (surface and sub soil water ) upto any depth and any quantum of water including cleaning of slush which may arrise out during dewatering as per entire the satisfaction and the direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana. toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete in open foundation for all type of structure complete of nominal mix 1:4:8 ( One cement : four sand : eight graded crushed/ broken stone aggregate 40mm ( forty millimetre) nominal size on ground or under water including curing complete and pumping or bailing out water, dewatering, removal of slush as required at site which may arise at the time of laying concrete complete for all heights/ depths including the cost of form work complete in all respect as per drawing and M.O.R.D. technical specification section 800, 900 and 1200 and as per the entire satisfaction and direction of the Engineer –in-Charge including carriage of materials within all lead, and lifts and other incidental . The rate is including octrai, royality, Malkana. toll tax, GST or other taxes imposed by the Government.

Back filling with granular material behind abutments, wing walls, return walls complete and retaining walls complete as per drawing and MORD technical specifications clause 1203 and 1604 and as per the entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads and lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 100mm dia ( One Hundred millimetre) diameter P.V.C. pipe weep holes in brick masonry/ stone masonry, plain/reinforced concrete abutment, wing wall, return wall and retaining/breast walls through the full width of the structures with slope of 1(V): 20 (H) (one vertical: twenty horizontal) towards draining face complete as per drawing and MORTH technical specifications clause 2706 and as per the entire satisfaction and direction of Engineer- in-Charge including carriage of materials within all leads and lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Loosening leveling and compacting original ground upto a level of 300mm ( three hundred millimetre) below the sub-grade level, watered, graded and compacted in layer to meet requirement of table 300.1 and 300.2 with power road roller 8-10 tonne ( eight –ten tonne ) capacity for sub grade construction as per M.O.R.D. technical specification section 300 including hauling of materials in all leads, lifts and other incidental or as per the entire specification and directions of Engineer-in-Charge . The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of sub grade and earthen shoulder with approved materials obtained from borrow pit, with in all lifts and leads transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 as per MORD technical specification section 400 including hauling of materials with in all leads, lifts and other incidental or as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Construction of Granular Sub Base 175mm thick (One hundred seventy five millimetre thick) by providing well graded material, spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel roller 80-100 (Eighty to hundred) KN static roller to achieve the desired density, complete as per MORD Technical Specification section 400 for grading-I material and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidential . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing, laying, spreading and compacting by mechanical means of stone aggregate of specific sizes to water bound Macadam specification including spreading in uniform thickness using template hand packing, rolling with three wheel 80-100 (eighty to hundred) K.N. static Road roller in stages to proper grade and camber including applying and brooming, stone, screening type-B of size 11.2mm (eleven point two millimetre) nominal size at the rate of 0.20 cum. (Zero point two zero cubic metre) per ten square metre and binding materials at the rate of 0.06 cum. (Zero point zero six cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density grading –II, 63mm to 45mm ( sixty three millimeters to forty five millimeters) size of aggregate, 75mm ( seventy five millimetre) compacted thickness as per M.O.R.D. technical specifications section 400 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer -in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing, laying, spreading and compacting by mechanical means of stone aggregate of specific sizes to water bound Macadam specification including spreading in uniform thickness using template hand packing, rolling with three wheel 80-100(eighty-hundred) K.N. static Road roller in stages to proper grade and camber including applying and bromming, stone, screening Type-B of size 11.2mm (eleven point two millimetres) nominal size at the rate of 0.18 cum. (zero point one eight cubic metre) per ten square metres to fill up the interstices of coarse aggregate, watering and compacting to the required density grading –III, 53mm to 22.4mm ( Fifty three millimeters to twenty two point four millimeters) size aggregate, 75mm ( seventy five millimetre) compacted thickness as per M.O.R.D. technical specifications section 400 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and applying primer coat with BITUMEN emulsion (SS-1) on the prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer @ 0.85 Kg. per Sqm. (Zero point eight five kilogram) per square metre using mechanical means as per M.O.R.D. technical specifications section 500 as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and applying tack coat with BITUMEN emulsion (SS-1) using emulsion distributor on the prepared granular surface treated with primer and cleaned with hydraulic brooms and spraying tack coat at the rate of 0.275 kg (Zero decimal two seven five kilogram) per square metre using mechanical means as per MORD technical specifications section 500 as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 30mm (thirty millimetre) compacted thickness Bituminous Concrete with minimum 100-120 (one hundred to one hundred twenty) TPH hot mix batch type plant with electronic control grading-II using crushed aggregate 13.2 (Thirteen decimal two) millimetre nominal size of specified grading premixed with bituminous, binder VG-10 (Viscosity grade ten) at the rate 5.40 to 5.60 % (Five decimal four zero to five decimal six zero percent) of weight of mix transpoted to site laid with censor paver finisher hydraulic witn censor control to the required grade, level and alignment over a previously prepared surface and rolling complete with smooth three wheel roller 8-10 (eight to ten) tonne capacity of pneumatic type roller of 12-15 (twelve to fifteen) tonne with tyre pressure of atleast 0.56 Mpa (zero decimal five six) for intermediate rolling and finish rolling with 6-8 (six to eight) tonne smooth wheeled tendom roller to achieve the desire compaction as per MORTH technical spcification section 500 , as per the direction and entire satisfaction of Engineer-in- Charge including carriage of materials within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Manoj Kumar

RAMAN KUMAR

GALAXY ASSOCIATE