CONSTRUCTION OF 01 SEMI PERMANENT BARRACK FOR COOK HOUSE

Construction of 01 Semi Permanent Barrack (Cook House Size 20’x20’x11’) and 7’ Verandah at 72 Bn Sodra, Sunderbani, Jammu

Earth work in excavation by mechanical means (hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge. i) For room wall Length=2(6.06+0.23) +2(6.06+0.23=20.4m-6m (06 nos Column)19.16m ii) for Verandah Length = (6.06+.23) +2(2.12+0.23)10.99mm iii) For Column Base (6Nos x 1=6m)

Providing and lying in position cement concrete of specified grade excluding the cost of centering and shuttering – all work up to plinth level: 1:3:6(1 Cement : 3 Coarse sand (zone-iii):6 graded stone aggregate 20 mm nominal size i) For room wall ii)For Verandah iii)For column Base (06 Nosx01=6m)

Bricks work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) i) For Room Wall (UP TO GL) ii) For Varandah(upto GL) III) FOR Room Wall (GL TO PL) iv)FOR Varandah(GL TO PL)

Providing and laying damp -prrof course 50 mm thick with cement concrete 1;2;4(1cement;2 coarse sand (Zone-iii);4graded stone aggregate 20 mm nominal size )

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and size in: Cement mortar 1:6 (1 cement :6 coarse sand) i) For Room Wall ii) 04 NOS SHELOVES PARTATION WALL SIZE (3'X4.5"X5') Total length of wall =4(0.91)=3.6m deduction for Door, Length=1.21=1.21m duration for 03 Nos windows,Length =3(1.21)=3.63m deduction for tie beam

Providing and lying position Specified grade of reinforced cement concrete, excluding the cost of centering , shuttering, finishing and reinforcement- All work up to plinth level 1:1:5:3 (1 cement : 1.5 coarse sand (Zone-III):3 grades stone aggregate 20 mm nominal size For foundation of Column (Length =6x0.6=3.6m) For Pedestral Length =0.45x6=2.7m

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15* landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand (zone-III):3 graded stone aggregate 20 mm nominal size For column 6x.23=1.38m Shelves Size of slab (20’x3’4”) Tie Beam

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (Total Volume of RCC Work = (2.89+2.18=5.07)

Centering and shuttering including strutting, propping etc, and removal of form for Foundation, footings, bases of column, etc. for mass concrete up to pl work For Foundation of Column (One column Four side) for pedestral

centering and shuttering including strutting, propping etc, and removal of form for super structure work colums pillars, piers, abutmets,posts and struts (0.23x4=0.92m FOR 6 Column=6x0.92=5.52m) to BEAM

12 mm cement plaster of Mix 1;65(1Cement;6 fine sand) internal room wall surface shelves wall deduction for Door opening and 02(outer+iinternal surface) length=1.21=2x1.21=2.42m deduction for 03 Nos windows opening adn 02 (Outer+ internal surface) Length =3(1.21)=3.63x2=7.26m

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plaster wall surface to prepare the surface even and smooth complete. internal room wall surface external room wall surface shelves wall deduction for Door opening and 02(outer+iinternal surface) length=1.21=2x1.21=2.42m deduction for 03 Nos windows opening adn 02 (Outer+ internal surface) Length =3(1.21)=3.63x2=7.26m

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/ liter, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. two or more coats on new work internal room wall surface external room wall surface shelves wall deduction for Door opening and 02(outer+iinternal surface) length=1.21=2x1.21=2.42m deduction for 03 Nos windows opening adn 02 (Outer+ internal surface) Length =3(1.21)=3.63x2=7.26m

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1cement:4 coarse sand): 25mm thick for inside of barrack for varandah

Providing and lying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand (Zone-III) : 4 graded stone aggregate 20 mm nominal size for room floor for verandah floor

Filling available excavated earth (excluding rock ) in trenches, plinth, sides of foundations etc. in layer not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering , lead up to 50m and lift upto 1.5 m For gap filling of foundation for plinth filling i) Room ii) Verandah

Steel work in bult up tubular (round, square or rectangular hollow tubes etc.) trusses etc, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc, complete Hot finished welded type tubes (including 2” and 4 post for Verandah)

Structural steel work riveted, bolted or welded in built up sections trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G.S. Sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel. Primer and two coats of approved a pint on overlapping of sheets complete (up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63mm thick wall zinc coating not less than 275 gm/m2 For Room For varandah

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 2540x10 mm

Providing and fixing ISI marked oxidized M.S. handles conforming to IS:4992 with necessary screws etc. Complete : 125 mm

Providing and fixing ISI marked oxidized M.S. door latches conforming to IS :5930 with screws etc. complete : 300X20X6 mm

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) kiln seasoned and chemicali treated hollock wook

Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges or required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge, (Note:- Butt hinges and necessary screws shall be paid separately) 30 mm thick shutters

length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. Channels 45x15x0.90mm running at the spacing of 1200mm c/c to which the celling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450mm c/c shall be fixed in a direction perpendicular to G.I. Intermediate channel with connection clips made out 2.64mm dia x230mm long G.I. wire at every junction including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of celling fixed to wall/partitions with the help of Rawl plugs at 450mm centre , with 25mm long dry wall screws @ 230mm interval, including fixing of Calclum silicate Board to celling section and perimeter channels with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointly compounds, jointing tapes, finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufactures specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in charge. 8mm thick calcium silicate board made with calcareous & siliceous materials reinforced with cellulos

M/S OSHO DHARA TRADERS (BID ID -3175817)